summaryrefslogtreecommitdiff
Commit message (Collapse)AuthorAgeLines
* MLK-14391-2 mx6sxarm2: Add DTS files for ARM2 boardsYe Li2017-04-05-0/+4764
| | | | | | | Copy the DTS files from kernel for 14x14/17x17/19x19 ARM2 board for preparing enabling the OF_CONTROL. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14391-1 mx6sxarm2: Add mx6sx 14x14/17x17/19x19 arm2 board codesYe Li2017-04-05-0/+3341
| | | | | | | | Copy the board codes and build configurations for i.MX6SX 14x14/17x17/19x19 ARM2 boards from v2016.03 as the base for converting to OF_CONTROL and DM driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14390-3 mx6sllarm2: Convert to enable OF_CONTROL and DM driversYe Li2017-04-05-51/+254
| | | | | | | | | | | | Update mx6sll lpddr2/3 arm2 board codes and build configurations to enable OF_CONTROL and DM drivers. 1. Update GPIO codes for adding gpio request 2. Enable USB DM driver 3. Update PMIC code for using DM PMIC 4. Add spinor boot support, pin conflict with LCD, will disable LCD. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14390-2 mx6sllarm2: Add DTS files for ARM2 boardYe Li2017-04-05-0/+862
| | | | | | | Copy the DTS files from kernel for LPDDR2/3 ARM2 board for preparing enabling the OF_CONTROL. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14390-1 mx6sllarm2: Add mx6sll LPDDR2/3 ARM2 board codesYe Li2017-04-05-0/+1605
| | | | | | | Move the mx6sll lpddr2/3 arm2 board codes and defconfigs from v2016.03 as the base for converting to use DTB OF_CONTROL. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14380-3 mx6ullarm2: Convert to enable OF_CONTROL and DM driversYe Li2017-04-05-65/+531
| | | | | | | | | | | | | | | Update mx6ull ddr3 arm2 board codes and build configurations to enable OF_CONTROL and DM drivers. 1. Update QSPI settings and codes for DM QSPI driver. 2. Update GPIO codes for adding gpio request 3. Enable FEC DM driver and update relevant configurations 4. Enable USB DM driver 5. Update PMIC and LDO by-pass codes for DM PMIC 6. Add various boot media support, QSPI/NAND/SPINOR 7. Add rework support for eMMC/QSPIB/TSC Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14380-2 mx6ullarm2: Add DTS files for ARM2 boardYe Li2017-04-05-0/+1159
| | | | | | | | | Copy the DTS files from kernel for DDR3 ARM2 board for preparing enabling the OF_CONTROL. Modify the QSPI n25q256a flash node's compatible to "spi-flash" for using DM SPI driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-13602-3 mx6ullevk/arm2: Enable module fuse checking for mx6ull boardsYe Li2017-04-05-0/+17
| | | | | | | | | Enable the module disable fuse checking configurations, and ENET fuse checking during ENET setup. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Bai Ping <ping.bai@nxp.com> (cherry picked from commit d2192a3909be8ab9433082e7c04c917489b28e25)
* MLK-13602-2 epdc: Add disable fuse checkingYe Li2017-04-05-0/+20
| | | | | | | | | Add fuse checking for EPDC module. Once the fused is programmed, the EPDC module is disabled, can't to access it. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Bai Ping <ping.bai@nxp.com> (cherry picked from commit ea7429b70c1eb2cf475028ee8df2ac9ed18b3c82)
* MLK-13602-1 mx6: Add i.MX6ULL fused modules checking supportYe Li2017-04-05-1/+44
| | | | | | | | Add the modules disable fuses mapping with FDT nodes and devices name. Signed-off-by: Ye Li <ye.li@nxp.com> Tested-by: Bai Ping <ping.bai@nxp.com> (cherry picked from commit d033825f034467fa9c9aeff6fcf95a146c802cf1)
* MLK-12929 imx6ull: support splash screen for epdcRobby Cai2017-04-05-1/+322
| | | | | | | | add splash screen feature for epdc. it's tested on imx6ull arm2 board. Signed-off-by: Robby Cai <robby.cai@nxp.com> (cherry picked from commit bcdbe240bb2a97d38ba30dd244a51ece87662b06)
* MLK-14380-1 mx6ullarm2: Add mx6ull DDR3 ARM2 board codesYe Li2017-04-05-0/+1243
| | | | | | | Move the mx6ull ddr3 arm2 board codes and defconfigs from v2016.03 as the base for converting to use DTB OF_CONTROL. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14382-3 mx6ularm2: Convert to enable OF_CONTROL and DM driversYe Li2017-04-05-140/+735
| | | | | | | | | | | | | | Update mx6ul ddr3 arm2 and lpddr2 arm2 boards codes and build configurations to enable OF_CONTROL and DM drivers. 1. Update QSPI settings and codes for DM QSPI driver. 2. Update GPIO codes for adding gpio request 3. Enable FEC DM driver and update relevant configurations 4. Enable USB DM driver 5. Update PMIC and LDO by-pass codes for DM PMIC 6. Add various boot media support, QSPI/NAND/SPINOR/EIMNOR Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14382-2 mx6ularm2: Add DTS files for ARM2 boardsYe Li2017-04-05-1/+1606
| | | | | | | | | Copy the DTS files from kernel for DDR3 ARM2 board and LPDDR2 ARM2 board preparing for enabling OF_CONTROL. Modify the QSPI n25q256a flash node's compatible to "spi-flash" for using DM SPI driver. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14382-1 mx6ularm2: Add DDR3 and LPDDR2 ARM2 board codesYe Li2017-04-05-0/+2906
| | | | | | | Move the mx6ul DDR3/LPDDR2 ARM2 boards codes from v2016.03 u-boot as the base for OF_CONTROL enabling. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-14 mx6ulevk: Enable OF_CONTROL and DM driversYe Li2017-04-05-60/+281
| | | | | | | | | | | | | | | | Update mx6ulevk board files and build configurations to enable OF_CONTROL and DM drivers. 1. QSPI settings and codes update for using DM QSPI driver. For DM and non-DM driver, the AMBA address is not same. 2. Update configurations for DM i2c driver, using CONFIG_SYS_I2C for non-DM driver 3. GPIO update for adding gpio_request 4. Add FEC DM driver support for two FEC controllers. 5. Enable USB DM driver. 6. Enable 74X164 DM driver for 74LV controlling. 7. Enable PMIC DM driver for 9x9 EVK Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-13 mx6ulevk: Add DTS filesYe Li2017-04-05-1055/+2938
| | | | | | | | | | Update i.MX6ul dtsi file and add mx6ul 14x14 and 9x9 evk DTS file to latest in kernel. To support DM QSPI driver, modify the DTS files with adding a spi0 alias for qspi node and changing the the n25q256a flash node's compatible to "spi-flash" Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-12 mx6sllevk: Update DTS filesYe Li2017-04-05-40/+51
| | | | | | Update i.MX6SLL dtsi file and mx6sll-evk DTS file to latest in kernel. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-11 mx6slevk: Enable OF_CONTROL and DM driversYe Li2017-04-05-21/+172
| | | | | | | | | | | | Update mx6slevk board files and build configurations to enable OF_CONTROL and DM drivers. 1. Update PMIC and LDO-bypass codes for DM PMIC driver. 2. Update configurations for DM i2c driver 3. GPIO update for adding gpio_request 4. Remove duplicated configurations from build config Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-10 mx6slevk: add DTS files and dt-binding header fileYe Li2017-04-05-0/+3218
| | | | | | | Update i.MX6SL dtsi file and dt-binding header files. Add the imx6sl-evk DTS file preparing for using DTB. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-9 mx6sxsabreauto: Update board file and build configurationYe Li2017-04-05-9/+44
| | | | | | | Enable FEC, USB and QSPI DM driver in build configuration and update board file for them. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-8 mx6sxsabreauto: Update DTS file to latest in kernelYe Li2017-04-05-28/+793
| | | | | | | | Copy the imx6sx-sdb latest DTS file from imx_4.1.y kernel. To support DM QSPI driver, modify the n25q256a flash node's compatible to "spi-flash". Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-7 mx6sxsabresd: Enable OF_CONTROL and DM driversYe Li2017-04-05-14/+243
| | | | | | | Update mx6sxsabresd board files and build configurations to enable OF_CONTROL and DM drivers. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-6 mx6sxsabresd: Update and add mx6sxsabresd DTS filesYe Li2017-04-05-111/+1599
| | | | | | | | | | | Update i.MX6SX dtsi file and relevant DTS header files. Add the imx6sx-sdb DTS files preparing for using DTB. To support DM QSPI driver 1. Modify the n25q256a flash node's compatible to "spi-flash". 2. Add spi0 and spi1 alias for qspi1 and qspi2. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-5 mx6qpsabreauto: Enable OF_CONTROL and DM driverYe Li2017-04-05-19/+303
| | | | | | | Update mx6qpsabreauto build configurations to use OF_CONTROL and DM driver. Also add the imx6qpsabreauto DTS file for using DTB. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-4 mx6dl/solosabreauto: Enable OF_CONTROL and DM driverYe Li2017-04-05-35/+295
| | | | | | | Update mx6dl/solosabreauto build configurations to use OF_CONTROL and DM driver. Also add the imx6dlsabreauto DTS file for using DTB. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-3 mx6qsabreauto: Enable OF_CONTROL and DM driverYe Li2017-04-05-91/+1650
| | | | | | | | | | | | | | Enable OF_CONTROL and DM driver on mx6qsabreauto. 1. Add the imx6qsabreauto relevant DTS file for using DTB. 2. Modify PMIC initialization codes to use DM PMIC driver. 3. Modify to use PCA953X DM driver 4. Remove NAND from default, since the default imx6q-sabreauto.dts disabled the nand. The pins are conflicted with UART3, while UART3 is enabled. 5. For NAND build configuration, remove the USB, since the imx6q-sabreauto-gpmi-weim.dts will have pin conflicts on steer logic. 6. GPIO requests added. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-2 mx6dlsabresd: Enable OF_CONTROL and DM driverYe Li2017-04-05-4/+210
| | | | | | | Enable OF_CONTROL and DM driver on mx6dlsabresd. And add the imx6dl sabresd DTS file for using DTB. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-1 mx6qpsabresd: Add DTS fileYe Li2017-04-05-0/+272
| | | | | | | Since we have enabled the i.MX6QP sabresd board with OF_CONTROL and DM driver. Add the imx6qp DTS file and imx6qp sabresd DTS file for build. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14375-3 mx6ullevk: Add 9x9 EVK board supportYe Li2017-04-05-0/+1278
| | | | | | | | | | | | | | 1. Add build configs for i.MX6ULL 9X9 EVK. Enable DM I2C driver and DM PMIC driver for pfuze3000. Convert power init codes to use DM PMIC driver. 2. Add lpddr2 script IMX6ULL_9X9_LPDDR2_400MHz_16bit_V1.2.inc for the 9x9 board. Refer the commit 44a84b44a84cd1bdcc54d722987e5f109510891b 3. Add DTS file for 9x9 evk board. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14375-2 mx6ullevk: Add DTS and build configuration for various boot devicesYe Li2017-04-05-0/+213
| | | | | | | To support boot from QSPI/NAND/eMMC, add relevant DTS files and build configurations. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14375-1 mx6ullevk: Update board codes to align with v2016.03Ye Li2017-04-05-32/+683
| | | | | | | | | | | | | | | | | | Update mx6ull evk to add features from v2016.03. 1. Add support for NAND flash. 2. Add support for QSPI DM driver. 3. Add USB DM driver support. 4. Add two FEC support by using DM FEC driver 5. Update environments for various boot devices support: SD/NAND/eMMC/QSPI 6. Add MFGtool environments. 7. Add board codes for 9x9 EVK board For the DTS file, some changes are needed for using QSPI DM driver 1. Add spi0 alias for qspi node. Which is used for bus number 0. 2. Modify the n25q256a@0 compatible property to "spi-flash". 3. Modify spi4 (gpio_spi) node to spi5 Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14371 fsl_qspi: update the driver to support mx6ul and mx7dYe Li2017-04-05-3/+16
| | | | | | | | | After porting to v2017.03. we start to use community's QSPI driver, not the one we maintained before in v2014-v2016. The new QSPI driver only supports i.MX6SX. This patch adds support for i.MX6UL and i.MX7D Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14366 mx6sllevk: Update board codes to align with v2016.03Ye Li2017-04-05-1/+20
| | | | | | | | | | Update mx6sll EVK board codes for features: 1. Add SD/MMC dynamical device detect. 2. Add wdog set for kernel. 3. Add mfgtool environments. 4. Modify SD/MMC environment offset. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14363 mx6qsabreauto: Fix ethernet PHY setting issueYe Li2017-04-05-0/+33
| | | | | | | | | | | The PHY settings for RGMII has been removed from mx6qsabreauto board codes, due to the atheros PHY driver have updated to use same configuration for AR8031 and AR8035, while this configuration is duplicated as we set in board codes. But in recent codes, the PHY driver added a patch for AR8031 independent config. So needs to add the PHY settings back to the board codes. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12996 imx: mx6dqp/dq: Fix SATA read/write fail after booting from SATAYe Li2017-04-05-4/+14
| | | | | | | | | | | | | | | We found a issue in PLL6 ENET that changing the bit[1:0] DIV_SELECT for ENET ref clock will impact the SATA ref 100Mhz clock. If SATA is initialized before this changing, SATA read/write can't work after it. And we have to re-init SATA. The issue can reproduce on both i.MX6DQP and i.MX6DQ. IC investigation is ongoing. This patch is an work around that moves the ENET clock setting (enable_fec_anatop_clock) from ethernet init to board_init which is prior than SATA initialization. So there is no PLL6 change after SATA init. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit fd8fbf7fa0b10199ac89cd13cae851149f51accb)
* MLK-12791 mx6qpsabresd: Change ENET TXCLK clock from PLLYe Li2017-04-05-0/+10
| | | | | | | | | | | | | In u-boot, i.MX6QP sabresd board uses 125Mhz ref clock from PHY, While kernel uses the clock from internal PLL by setting GPR5 bit 9. When doing warm reset in kernel, the GPR regigster is not reset, so the clock source still is the PLL. This causes ENET in u-boot can't work. In this patch, we change the u-boot to use internal PLL to align with kernel for i.MX6QP. This also fixes the ENET issue after kernel warm reset. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 7f00c72e17e4e440df62aa4945a619fdbc9cfd8f)
* MLK-12723 imx: Change the env offset on NAND to 60MYe Li2017-04-05-3/+3
| | | | | | | | | | | | | | | | Current environment offset on NAND is 37MB, this will cause a alignment issue when erasing if nand erase block is 2MB. The saveenv is failed. => saveenv Saving Environment to NAND... Erasing NAND... Attempt to erase non block-aligned data Since the max erase block we supported is 4MB, adjust the env offset to 60MB, where is the last 4MB in 64MB reserved area for boot. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 22f6c4b151fbdea1985403086715de841152c880)
* MLK-10186-1 imximage: add fixed IVT offset supportYe.Li2017-04-05-1/+8
| | | | | | | | | | | Since from mx7, we use fixed IVT offset for all boot devices. Introduce a new configuration CONFIG_IMX_FIXED_IVT_OFFSET for this. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit 88e0a3552b08627b18d98380a32dbafacb18854b) (cherry picked from commit 3d52e221ed444dab96038a2417d1dcb2217ad593) (cherry picked from commit 13d39c51bbaabbcf3b72516d8ac3f1853f686ace)
* MLK-12416-9: mx6qp: define CONFIG_MX6QPPeng Fan2017-04-05-7/+14
| | | | | | | | Define CONFIG_MX6QP which will also set CONFIG_MX6Q, otherwise plugin code will use wrong ddr script. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 901d9eb01736ab54822678a197fe1aeb281a81b9)
* MLK-12442: imx: mx6qarm2: lpddr2 set dram 2 channel fixed modeAdrian Alonso2017-04-05-4/+26
| | | | | | | | | | | | | | Setup MMDC in two channel fixed mode Initialize dram banks for two channel fixed mode DRAM bank = 0x00000000 -> start = 0x10000000 -> size = 0x20000000 DRAM bank = 0x00000001 -> start = 0x80000000 -> size = 0x20000000 Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit bf1d8faf1dab7c4245ba7b79ceef6279cff45625)
* MLK-12560 mx6: Enable eMMC boot support for all mx6Ye Li2017-04-05-1/+1
| | | | | | | | | Set the CONFIG_SUPPORT_EMMC_BOOT in mx6_common.h to enable the eMMC boot support for all mx6 platforms. Remove the duplicated definition in board's header file. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit dbe744de73c88f14e01f56a3258752ab5cd45b14)
* MLK-12559 mx6: Enable memory test commandYe Li2017-04-05-0/+53
| | | | | | | | Set the CONFIG_CMD_MEMTEST on all mx6 platforms for enabling the u-boot memory test. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 75b5a7d5931064386ae38ce74a34eb6e368666a5)
* MLK-12555-2 mx6ulevk: Enable the Watchdog WDOG_B signal outputYe Li2017-04-05-0/+2
| | | | | | | | | When using watchdog timeout in kernel, the reset does not output the WDOG_B signal, so the power supply won't be reset. To solve the problem, we enable it in u-boot. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 8a713e8cd1500ecc6daa02a14a63763a548095b4)
* MLK-12555 mx6sxsabreauto: Enable the Watchdog WDOG_B signal outputYe Li2017-04-05-0/+3
| | | | | | | | | When using watchdog timeout in kernel, the reset does not output the WDOG_B signal, so the power supply won't be reset. To solve the problem, we enable it in u-boot. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 7b53ee014c9f02f6ead0b60d5295d07205247a7c)
* MLK-11230 imx6: USB: Modify OTG ID pin pad setting to pull upYe.Li2017-04-05-6/+31
| | | | | | | | | | | Set the ID pin pad to pull up not the pull down at default, otherwise we can't enter the device mode, but always detect as host. After this change we have to use portA cable to play as host, and use portB cable for device. Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit b315d6b36a913d75d25284320e69050ebdf7a7eb)
* MLK-12531 mx6sxsabresd: Add CM4 fast boot up demoYe Li2017-04-05-2/+65
| | | | | | | | | | | | | | | | | | This is a demo that CM4 will boot up by u-boot without typing any command. It boots up at u-boot early init, try to minimize the time from power up to the CM4 running. Since CM4 runs on QSPI NOR XIP, we have to disable the QSPI driver in u-boot to avoid conflict. RDC for shared GPIO1 is added, but not enabled, because the kernel is not ready for shared GPIO1. Users can uncomment the CONFIG_IMX_RDC to enable it. Some legacy codes in mx6sxsabreauto are removed. We only need this work on mx6sxsabresd as a demo. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit f66842f79d4e33ace45762466eed23a86d367642)
* MLK-12493-1 Add support for various boot deviceYe Li2017-04-05-169/+1328
| | | | | | | | | | Add support for various boot devices like NAND, QSPINOR, SPINOR, eMMC, EIMNOR, SATA. Modify board level files to support the feature and add corresponding defconfig files Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 72c35e80b86f7f75a52db45959793882bb730793)
* MLK-12500-2 HAB: Add commented secure boot configurationsYe Li2017-04-05-0/+62
| | | | | | | | | | | | CONFIG_SECURE_BOOT is used for signed image building, this configuration is not enabled at default. Comment it in mx6/mx7 common header file. Users can uncomment it to enable. Also add CONFIG_CSF_SIZE for defining the CSF reserved size and resize the CONFIG_CSF_SIZE to 0x4000 to align with v2016.03. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 01cc7d9bc205251c13712418d51f3a4d7b20861b)
* MLK-12500-1 HAB: Add kernel image authentication in image loadingYe Li2017-04-05-0/+33
| | | | | | | | | | To support the trust boot chain, we integrate the authentication into the kernel image loading process. The kernel image will be verified at its load address. So when signing the kernel image, we need to use this load address which may change on different platforms. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 3c118b8d6bbe1a25ca8c8bafeb528309f16fc73d)
generated by cgit v1.1 at 2024-11-19 07:54:08 +0000