summaryrefslogtreecommitdiff
path: root/board/freescale
Commit message (Collapse)AuthorAgeLines
...
* | | armv8: ls2080aqds: Config QSPI pin mux via FPGA in NAND bootYuan Yao2016-06-10-0/+9
| | | | | | | | | | | | | | | Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | armv8: ls2080aqds: disable IFC NOR & QIXIS when QSPI enableYuan Yao2016-06-10-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | When QSPI is enabled, NOR flash and QIXIS can't be accessed through IFC due to pin mux. Enable I2C QIXIS access and I2C early init to read the sysclk and ddrclk. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | armv8: ls2080aqds: Select QSPI CLK div via SCFGYuan Yao2016-06-10-0/+5
| | | | | | | | | | | | | | | | | | | | | QSPI module output SCLK divisor value is configured through SCFG. Signed-off-by: Yuan Yao <yao.yuan@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | board: ls2080a: Add "mcinitcmd" env for MC & DPL deploymentPratiyush Mohan Srivastava2016-06-10-0/+10
| |/ |/| | | | | | | | | | | | | | | | | | | | | Environment variable mcinitcmd is defined to initiate MC and DPL deployment from the location where it is stored (NOR, NAND, SD, SATA, USB) during booting. If this variable is not defined then macro MC_BOOT_ENV_VAR will be null and MC will not be booted and DPL will not be applied during U-boot booting. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2016-06-04-93/+77
|\ \
| * | freescale: Tweak various Makefiles to remove redundancy, fix aestheticsRobert P. J. Day2016-06-03-65/+46
| | | | | | | | | | | | | | | | | | | | | | | | No intended functional change, just remove redundancies in some Makefiles, and make whitespace aesthetics uniform. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-by: York Sun <york.sun@nxp.com>
| * | board/freescale: Use unified setup_ddr_tlbs for spl boot and non-spl bootShengzhou Liu2016-06-03-28/+19
| | | | | | | | | | | | | | | | | | | | | | | | We should use unified setup_ddr_tlbs() for spl boot and non-spl boot to make sure 'M' bit is set for DDR TLB to maintain cache coherence. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | powerpc/board: SPL: Enable malloc flag in global data.Sumit Garg2016-06-03-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | For malloc to work in SPL framework enable GD_FLG_FULL_MALLOC_INIT flag in global data after allocating memory using mem_malloc_init. Signed-off-by: Sumit Garg <sumit.garg@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | Merge git://git.denx.de/u-boot-nand-flashTom Rini2016-06-04-2/+2
|\ \ \
| * | | mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_dataScott Wood2016-06-03-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | These functions are part of the Linux 4.6 sync. They are being added before the main sync patch in order to make it easier to address the issue across all NAND drivers (many/most of which do not closely track their Linux counterparts) separately from other merge issues. Signed-off-by: Scott Wood <oss@buserror.net>
* | | armv8: ls1012a: Add support of ls1012afrdm boardPrabhakar Kushwaha2016-06-03-0/+278
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QorIQ LS1012A FREEDOM (LS1012AFRDM) is a high-performance development platform, with a complete debugging environment. The LS1012AFRDM board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | armv8: ls1012a: Add support of ls1012ardb boardPrabhakar Kushwaha2016-06-03-0/+306
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | armv8: ls1012a: Add support of ls1012aqds boardPrabhakar Kushwaha2016-06-03-0/+356
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QorIQ LS1012A Development System (LS1012AQDS) is a high-performance development platform, with a complete debugging environment. The LS1012AQDS board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | board: freescale: common: Add flag for LBMAP brdcfg reg offsetAbhimanyu Saini2016-06-03-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add QIXIS_LBMAP_BRDCFG_REG to the save offset of LBMAP configuration register instead of hardcoding it in set_lbmap() function. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | board: freescale: common: Conditionally compile IFC QXIS funcAbhimanyu Saini2016-06-03-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Check if qixis supports memory-mapped read/write before compiling IFC based qixis read/write functions. Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | armv8: fsl-layerscape: Organize SoC overview at common locationPrabhakar Kushwaha2016-06-03-154/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC overviews are getting repeated across board folders. So, Organize SoC overview at common location i.e. fsl-layerscape/doc Also move README.lsch2 and README.lsch3 in same folder. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | armv8: ls1043aqds: fix usb PWRFAULT settingShaohui Xie2016-06-03-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | SCFG_USBPWRFAULT_DEDICATED instead of SCFG_USBPWRFAULT_SHARED should be used for USB 3 & 2. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | | board: ls2080ardb: qds: Fix compiling issue when FSL_MC_ENET not definedYork Sun2016-06-03-0/+8
| | | | | | | | | | | | | | | | | | | | | U-Boot should continue to work without management complex (MC). Fix compiling errors and warnings. Signed-off-by: York Sun <york.sun@nxp.com>
* | | board: ls102xa: Fix ICID setupVincent Siles2016-06-03-2/+5
| | | | | | | | | | | | | | | | | | | | | LS102A ref manual dictates that ICID have to be written to the MSB of the ICID register, not to the LSB. Signed-off-by: Vincent Siles <vincent.siles@provenrun.com>
* | | board/freescale: Update ddr clk_adjustShengzhou Liu2016-06-03-172/+172
|/ / | | | | | | | | | | | | | | | | This patch updates clk_adjust to actual value for boards with T-series and LS-series SoCs to match the setting of clk_adjust in latest ddr driver. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | Delete tests of CONFIG_OF_LIBFDT when testing CONFIG_OF_BOARD_SETUPRobert P. J. Day2016-05-27-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since CONFIG_OF_BOARD_SETUP depends on CONFIG_OF_LIBFDT: config OF_BOARD_SETUP bool "Set up board-specific details in device tree before boot" depends on OF_LIBFDT ... remove superfluous tests of CONFIG_OF_LIBFDT when testing for CONFIG_OF_BOARD_SETUP. Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> [trini: Typo fix: s/ifdefi/ifdef/] Signed-off-by: Tom Rini <trini@konsulko.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2016-05-25-2/+7
|\ \
| * | powerpc:t4240rdb: Disable the non-existent ethernet ports on T4240RDBYing Zhang2016-05-24-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Disable the non-existent ethernet ports on T4240RDB:FM1_DTSEC5, FM1_DTSEC6, FM2_DTSEC5 and FM2_DTSEC6. Signed-off-by: Ying Zhang <ying.zhang22455@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <york.sun@nxp.com>
| * | powerpc/t208xrdb: Update MAINTAINERS fileYork Sun2016-05-19-1/+1
| | | | | | | | | | | | | | | Signed-off-by: York Sun <york.sun@nxp.com> CC: Shengzhou Liu <Shengzhou.Liu@nxp.com>
| * | powerpc/t208xqds: Update MAINTAINERS fileYork Sun2016-05-19-1/+1
| |/ | | | | | | | | Signed-off-by: York Sun <york.sun@nxp.com> CC: Shengzhou Liu <Shengzhou.Liu@nxp.com>
* | armv8: ls1043ardb: invert irq pin polarity for AQR105 PHYShaohui Xie2016-05-18-0/+4
| | | | | | | | | | | | | | | | | | To use AQR105 PHY's interrupt, we need to invert the IRQ pin polarity by setting relative bit in SCFG_INTPCR register, because AQR105 interrupt is low active but GIC accepts high active. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | arch/arm, arch/powerpc: add # of SEC engines on the SOCAlex Porosanu2016-05-18-1/+1
| | | | | | | | | | | | | | | | | | | | Some SOCs, specifically the ones in the C29x familiy can have multiple security engines. This patch adds a system configuration define which indicates the maximum number of SEC engines that can be found on a SoC. Signed-off-by: Alex Porosanu <alexandru.porosanu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8: ls1043ardb: fix types of variablesQianyu Gong2016-05-18-3/+3
| | | | | | | | | | | | | | Using u16 for cfg_rcw_src and u8 for sd1refclk_sel is enough. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8: ls1043a: remove redundant code in board filesQianyu Gong2016-05-18-9/+0
| | | | | | | | | | | | | | | | | | gd->env_addr will be initialized in env_init() in common/env_nowhere.c if CONFIG_ENV_IS_NOWHERE is defined. So no need to do it again. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8/ls1043ardb: fix the limitation of using 'cpld reset'Qianyu Gong2016-05-18-2/+25
| | | | | | | | | | | | | | | | | | | | The current 'cpld reset' will just write global_rst register but couldn't switch to NOR boot if the board's switches are for NAND/SD boot. So need to write rcw source registers for NOR boot as well. Signed-off-by: Gong Qianyu <Qianyu.Gong@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | arm: uniform usage of u32 in ls102x caam configVincent Siles2016-05-18-1/+1
| | | | | | | | | | | | | | Mix usage of uint32_t and u32 fixed in favor of u32. Signed-off-by: Vincent Siles <vincent.siles@provenrun.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | arm: Fix SCFG ICID reg addressesVincent Siles2016-05-18-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | On the LS102x boards, in order to initialize the ICID values of masters, the dev_stream_id array holds absolute offsets from the base of SCFG. In ls102xa_config_ssmu_stream_id, the base pointer is cast to uint32_t * before adding the offset, leading to an invalid address. Casting it to void * solves the issue. Signed-off-by: Vincent Siles <vincent.siles@provenrun.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8: ls2080a: Update MAINTAINERS filePrabhakar Kushwaha2016-05-17-2/+2
| | | | | | | | | | | | | | Update MAINTAINERS file for ls2080aqds and ls2080ardb platforms. Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8/ls2080ardb: Update DDR timing to support more UDIMMsShengzhou Liu2016-05-17-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Optimize DDR timing for good margins to support new Transcend and Apacer DDR4 UDIMM besides current Micron UDIMM. Verified 1333MT/s, 1600MT/s, 1866MT/s, 2133MT/s rate with following UDIMM on LS2080ARDB. - Micron UDIMM: MTA18ASF1G72AZ-2G1A1Z - Apacer UDIMM: 78.C1GM4.AF10B - Transcend UDIMM: TS1GLH72V1H Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8/ls1043: Add workaround for DDR erratum A-008850Shengzhou Liu2016-05-17-16/+8
|/ | | | | | | | | Barrier transactions from CCI400 need to be disabled till the DDR is configured, otherwise it may lead to system hang. The patch adds workaround to fix the erratum. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* Fix various typos, scattered over the code.Robert P. J. Day2016-05-05-3/+3
| | | | | | | | | | | | | Spelling corrections for (among other things): * environment * override * variable * ftd (should be "fdt", for flattened device tree) * embedded * FTDI * emulation * controller
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-04-13-29/+19
|\
| * mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violationsTom Rini2016-04-03-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Having had a similar board and memory part under logic analyzer, a tINIT3 violation was measured. The fix was involved keeping tXPR and SDE_to_RST at the power-on defaults and setting RST_to_CKE the JEDEC value for LPDDR2. There was also a tIH-CA violation and this was resolved by writing the default value in rather than what the script here uses. Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <peng.fan@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
| * mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violationTom Rini2016-04-03-2/+2
| | | | | | | | | | | | | | | | | | | | | | Having had a similar board and memory part under logic analyzer, a tINIT3 violation was measured. The fix was involved keeping tXPR and SDE_to_RST at the power-on defaults and setting RST_to_CKE the JEDEC value for LPDDR2. Cc: Jason Liu <jason.hui.liu@nxp.com> Cc: Ye Li <ye.li@nxp.com> Signed-off-by: Tom Rini <trini@konsulko.com>
| * mx6sabresd: Remove unneeded enable_lvds() functionFabio Estevam2016-04-03-11/+1
| | | | | | | | | | | | | | | | | | | | enable_lvds() function only set bits IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT and IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT, but these bits were already set previously inside setup_display(). We can safely remove enable_lvds() then. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
| * mx6sabresd: Use VESA 1024x768 timingsFabio Estevam2016-03-25-14/+14
| | | | | | | | | | | | | | | | VESA 1024x768 results in much more accurate timings. Based on the patch from Soeren Moch for the tbs2910 board. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
* | armv8: LS2080A: Consolidate LS2080A and LS2085AYork Sun2016-04-06-47/+48
| | | | | | | | | | | | | | | | | | | | | | | | LS2080A is the primary SoC, and LS2085A is a personality with AIOP and DPAA DDR. The RDB and QDS boards support both personality. By detecting the SVR at runtime, a single image per board can support both SoCs. It gives users flexibility to swtich SoC without the need to reprogram the board. Signed-off-by: York Sun <york.sun@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* | armv8: ls1043aqds: make sure fixed-link property is big endianShaohui Xie2016-04-06-6/+6
| | | | | | | | | | | | | | | | | | When setting fixed-link property to DTS, the values should be converted with using cpu_to_fdt32 so that to have correct value on little endian Soc. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | usb: Rename ehci-fsl.h to ehci-ci.hMateusz Kulikowski2016-04-01-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Most of ehci-fsl header describe USB controller designed by Chipidea and used by various SoC vendors. This patch renames it to a generic header: ehci-ci.h Contents of file are not changed (so it contains several references to freescale SoCs). Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Simon Glass <sjg@chromium.org>
* | armv8/ls2080ardb: Enable VID supportRai Harninder2016-03-29-1/+23
| | | | | | | | | | | | | | | | This patch enable VID support for ls2080ardb platform. It uses the common VID driver. Signed-off-by: Rai Harninder <harninder.rai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | SECURE BOOT: Change fsl_secboot_validate func to pass image addrSaksham Jain2016-03-29-12/+26
| | | | | | | | | | | | | | | | | | Use a pointer to pass image address to fsl_secboot_validate(), instead of using environmental variable "img_addr". Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Saksham Jain <saksham.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | SECURE BOOT: Halt execution when secure boot failSaksham Jain2016-03-29-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | In case of fatal failure during secure boot execution (e.g. header not found), reset is asserted to stop execution. If the RESET_REQ is not tied to HRESET, this allows the execution to continue. Add esbh_halt() after the reset to make sure execution stops. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Saksham Jain <saksham.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8: ls2080rdb: ls2080qds: Add secure boot supportSaksham Jain2016-03-29-2/+20
| | | | | | | | | | | | | | | | | | | | Sec_init has been called at the beginning to initialize SEC Block (CAAM) which is used by secure boot validation later for both ls2080a qds and rdb. 64-bit address in ESBC Header has been enabled. Secure boot defconfigs are created for boards (NOR boot). Signed-off-by: Saksham Jain <saksham.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8: fsl-lsch3: Add new header for secure bootSaksham Jain2016-03-29-5/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | For secure boot, a header is used to identify key table, signature and image address. A new header structure is added for lsch3. Currently key extension (IE) feature is not supported. Single key feature is not supported. Keys must be in table format. Hence, SRK (key table) must be present. Max key number has increase from 4 to 8. The 8th key is irrevocable. A new barker Code is used. Signed-off-by: Aneesh Bansal <aneesh.bansal@nxp.com> Signed-off-by: Saksham Jain <saksham.jain@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* | armv8: ls2080a: Update fdt path for fsl-mc nodeStuart Yoder2016-03-24-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | The fsl-mc node has been moved under /soc, so update the path references accordingly. Backwards compatibility is retained for /fsl-mc. Delete backwards compatibility for the completely obsolete /fsl,dprc@0. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
generated by cgit v1.1 at 2024-11-09 22:27:45 +0000