summaryrefslogtreecommitdiff
path: root/board/freescale
diff options
context:
space:
mode:
authorRai Harninder <harninder.rai@nxp.com>2016-03-23 17:04:38 +0530
committerYork Sun <york.sun@nxp.com>2016-03-29 08:46:24 -0700
commited2530d0963196a7175058ed9b5e6cbc29822f7f (patch)
tree655d3aab7b2eea0eff9226600e01de244d75e253 /board/freescale
parent2ef846e45cf0dbb9fb7d183266e4d57446592177 (diff)
downloadu-boot-imx-ed2530d0963196a7175058ed9b5e6cbc29822f7f.zip
u-boot-imx-ed2530d0963196a7175058ed9b5e6cbc29822f7f.tar.gz
u-boot-imx-ed2530d0963196a7175058ed9b5e6cbc29822f7f.tar.bz2
armv8/ls2080ardb: Enable VID support
This patch enable VID support for ls2080ardb platform. It uses the common VID driver. Signed-off-by: Rai Harninder <harninder.rai@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
Diffstat (limited to 'board/freescale')
-rw-r--r--board/freescale/common/vid.c15
-rw-r--r--board/freescale/ls2080ardb/ls2080ardb.c9
2 files changed, 23 insertions, 1 deletions
diff --git a/board/freescale/common/vid.c b/board/freescale/common/vid.c
index a6a132a..2f29795 100644
--- a/board/freescale/common/vid.c
+++ b/board/freescale/common/vid.c
@@ -10,6 +10,8 @@
#include <asm/io.h>
#ifdef CONFIG_LS1043A
#include <asm/arch/immap_lsch2.h>
+#elif defined(CONFIG_FSL_LSCH3)
+#include <asm/arch/immap_lsch3.h>
#else
#include <asm/immap_85xx.h>
#endif
@@ -285,7 +287,7 @@ static int set_voltage(int i2caddress, int vdd)
int adjust_vdd(ulong vdd_override)
{
int re_enable = disable_interrupts();
-#ifdef CONFIG_LS1043A
+#if defined(CONFIG_LS1043A) || defined(CONFIG_FSL_LSCH3)
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
#else
ccsr_gur_t __iomem *gur =
@@ -362,7 +364,11 @@ int adjust_vdd(ulong vdd_override)
}
/* get the voltage ID from fuse status register */
+#ifdef CONFIG_FSL_LSCH3
+ fusesr = in_le32(&gur->dcfg_fusesr);
+#else
fusesr = in_be32(&gur->dcfg_fusesr);
+#endif
/*
* VID is used according to the table below
* ---------------------------------------
@@ -387,6 +393,13 @@ int adjust_vdd(ulong vdd_override)
vid = (fusesr >> FSL_CHASSIS2_DCFG_FUSESR_VID_SHIFT) &
FSL_CHASSIS2_DCFG_FUSESR_VID_MASK;
}
+#elif defined(CONFIG_FSL_LSCH3)
+ vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_ALTVID_SHIFT) &
+ FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK;
+ if ((vid == 0) || (vid == FSL_CHASSIS3_DCFG_FUSESR_ALTVID_MASK)) {
+ vid = (fusesr >> FSL_CHASSIS3_DCFG_FUSESR_VID_SHIFT) &
+ FSL_CHASSIS3_DCFG_FUSESR_VID_MASK;
+ }
#else
vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) &
FSL_CORENET_DCFG_FUSESR_ALTVID_MASK;
diff --git a/board/freescale/ls2080ardb/ls2080ardb.c b/board/freescale/ls2080ardb/ls2080ardb.c
index ec4b74c..8201048 100644
--- a/board/freescale/ls2080ardb/ls2080ardb.c
+++ b/board/freescale/ls2080ardb/ls2080ardb.c
@@ -22,6 +22,7 @@
#include "../common/qixis.h"
#include "ls2080ardb_qixis.h"
+#include "../common/vid.h"
#define PIN_MUX_SEL_SDHC 0x00
#define PIN_MUX_SEL_DSPI 0x0a
@@ -123,6 +124,11 @@ int select_i2c_ch_pca9547(u8 ch)
return 0;
}
+int i2c_multiplexer_select_vid_channel(u8 channel)
+{
+ return select_i2c_ch_pca9547(channel);
+}
+
int config_board_mux(int ctrl_type)
{
u8 reg5;
@@ -189,6 +195,9 @@ int misc_init_r(void)
if (hwconfig("sdhc"))
config_board_mux(MUX_TYPE_SDHC);
+ if (adjust_vdd(0))
+ printf("Warning: Adjusting core voltage failed.\n");
+
return 0;
}