summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget
Commit message (Collapse)AuthorAgeLines
* Move ENOTSUPP defines to include/linux/errno.hMasahiro Yamada2016-09-23-2/+0
| | | | | | Collect a couple of duplicated defines into a single place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* treewide: replace #include <asm/errno.h> with <linux/errno.h>Masahiro Yamada2016-09-23-12/+12
| | | | | | | | | | | Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have the same content. (both just wrap <asm-generic/errno.h>) Replace all include directives for <asm/errno.h> with <linux/errno.h>. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> [trini: Fixup include/clk.] Signed-off-by: Tom Rini <trini@konsulko.com>
* fastboot: implement KconfigSteve Rae2016-08-20-0/+5
| | | | | | implement Kconfig for the 'fastboot' feature set Signed-off-by: Steve Rae <steve.rae@raedomain.com>
* usb: dwc2 : invalidate dcache before starting DMAXu Ziyuan2016-07-25-0/+3
| | | | | | | | | | | | Invalidate dcache before starting the DMA to ensure coherency. In case there are any dirty lines from the DMA buffer in the cache, subsequent cache-line replacements may corrupt the buffer in memory while the DMA is still going on. Cache-line replacement can happen if the CPU tries to bring some other memory locations into the cache while the DMA is going on. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* usb: dwc2-otg: adjust fifo size via platform dataXu Ziyuan2016-07-25-9/+19
| | | | | | | | The total FIFO size of some SoCs may be different from the existen, this patch supports fifo size setting from platform data. Signed-off-by: Ziyuan Xu <xzy.xu@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* fastboot: sparse: resync common/image-sparse.c (part 2)Steve Rae2016-06-27-12/+19
| | | | | | | | | | | | | | | | - update fastboot_okay() and fastboot_fail() This file originally came from upstream code. While retaining the storage abstraction feature, this is the second set of the changes required to resync with the cmd_flash_mmc_sparse_img() in the file aboot.c from https://us.codeaurora.org/cgit/quic/la/kernel/lk/plain/app/aboot/aboot.c?h=LE.BR.1.2.1 Signed-off-by: Steve Rae <srae@broadcom.com>
* fastboot: sparse: remove session-id logicSteve Rae2016-06-27-14/+2
| | | | | | | This "session-id" alogrithm is not required, and currently corrupts the stored image whenever more the one "session" is required. Signed-off-by: Steve Rae <srae@broadcom.com>
* usb: dwc2_udc_otg: support 8-bit interfaceSteve Rae2016-06-13-0/+14
| | | | | | | Define CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8 to allow the physical interface to be 8-bit (rather than 16-bit). Signed-off-by: Steve Rae <srae@broadcom.com>
* usb: gadget: dfu: discard dead codePeng Fan2016-05-06-9/+1
| | | | | | | | | | | | | | Reported by Coverity: Logically dead code (DEADCODE) dead_error_line: Execution cannot reach this statement: (f_dfu->strings + --i).s = .... If calloc failed, i is still 0 and no need to call free, so discard the dead code. Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: "Łukasz Majewski" <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* Fix spelling of "occurred".Vagrant Cascadian2016-05-02-1/+1
| | | | | Signed-off-by: Vagrant Cascadian <vagrant@debian.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* usb: s3c-otg: Fix remaining bytes in debug messagesRoger Quadros2016-04-25-2/+2
| | | | | | | | | | Remaining bytes means bytes that are not yet transferred and not the bytes that were transferred in the last transfer. Reported-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <srae@broadcom.com> [Test HW: bcm28155_ap board]
* usb: s3c-otg: Fix short packet for request size > ep.maxpacketRoger Quadros2016-04-25-1/+1
| | | | | | | | | | | | | | Request size can be greater than ep.packet and still end in a short packet. We need to tackle this case as end of transfer (if short_not_ok is not set) as indicated in USB 2.0 Specification [1], else we get stuck up on certain protocols like fastboot. [1] - USB2.0 Specification, Section 5.3.2 Pipes Reported-by: Steve Rae <steve.rae@broadcom.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <steve.rae@broadcom.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
* fastboot: Clean up bulk-out logicRoger Quadros2016-04-25-27/+23
| | | | | | | | Just use ep->maxpacket to get the maxpacket size and simplify the bulk-out maxpacket alignment. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <srae@broadcom.com>
* fastboot: Enable the respective speed endpoints at runtimeRoger Quadros2016-04-25-7/+17
| | | | | | | | | | In a dual speed configuration we need to check at runtime if we want to enable the Full-Speed or High-Speed endpoint. Signed-off-by: Roger Quadros <rogerq@ti.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Tested-by: Steve Rae <srae@broadcom.com> [Test HW: bcm235xx board]
* fastboot: Fix wMaxPacketSize for High-Speed IN endpointRoger Quadros2016-04-25-9/+27
| | | | | | | | | | | | | | wMaxPacketSize for IN endpoing in High-Speed must be 512 and not 64. While fixing that we do some clean ups like - use cpu_to_le16(decimal_length) instead of hexadecimal length. - No need to initialize bInterval to 0. Static variables are 0 initialized. - Move descriptor setting from fastboot_add to to fastboot_bind. - check for dual speed configuration before setting the high speed descriptors. Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Steve Rae <srae@broadcom.com> Tested-by: Steve Rae <srae@broadcom.com> [Test HW: bcm235xx board]
* usb: gadget Move: CONFIG_G_DNL_* to KconfigSam Protsenko2016-04-20-1/+14
| | | | | | And also reformat defconfigs using "make savedefconfig" rule. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to KconfigSam Protsenko2016-04-20-0/+6
| | | | | | | While at it, remove obsolete CONFIG_USBDOWNLOAD_GADGET option from some config headers. This is also probably fixes am335x_baltos board. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to KconfigSam Protsenko2016-04-20-0/+27
| | | | | | | | | | | | | | | | | | | | | | Move CONFIG_USB_GADGET_DUALSPEED option to Kconfig and make all UDC controllers select USB_GADGET_DUALSPEED: - add next options to Kconfig selecting USB_GADGET_DUALSPEED: - USB_GADGET_ATMEL_USBA - USB_GADGET_DWC2_OTG - USB_DWC3 - CI_UDC - make USB_MUSB_GADGET select USB_GADGET_DUALSPEED While at it, make some related fixes: - remove DUALSPEED from configs that don't enable gadget support: - kwb.h - tseries.h - add missing USB_GADGET option to next configs: - novena_defconfig - pcm051_rev*_defconfig - xfi3_defconfig Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to KconfigSam Protsenko2016-04-20-0/+21
| | | | | | | | | | | The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig. Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig). Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* USB: g_dnl: Change device classJohn Tobias2016-04-20-2/+2
| | | | | | | | | | | | | | | | | | | | | | | The USB Mass Storage (ums) works in Windows, Linux and OS X (EL Capitan). But, not in OS X (Yosemite). By applying the said patch, it extends the ums support. Signed-off-by: John Tobias <john.tobias.ph@gmail.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com> Test HW: Odroid XU3 (./test/py UMS + DFU tests) Tested-by: John Tobias <john.tobias.ph@gmail.com> Linux: - Run ums to expose all my eMMC partition - shows all correctly - Run ums to expose only 1 partition of my eMMC - show correctly Windows: - Run ums to expose all my eMMC partition - it detects but it prompts, if I want to format it (due to a non windows partition) - Run ums to expose only the FAT32 partition - it show the partition correctly.
* usb: bcm_udc_otg: enable clocksSteve Rae2016-04-10-0/+4
| | | | | | Turn on the USB OTG clocks. Signed-off-by: Steve Rae <srae@broadcom.com>
* fastboot: allow retrieving fastboot variables from envRob Herring2016-04-01-2/+10
| | | | | | | | | | | | | | | | | | | | Some boards need to expose device specific variable through fastboot (to adpat the flashing script depending on hardware revision for example). Provide a way to expose custom fastboot variables. Note that all variables meant to be exposed through fastboot should be be prefixed with 'fastboot.', the variable should not exceed 32 bytes (including the prefix and the trailing '\0') and the variable content should fit in the response buffer (60 bytes excluding the 'OKAY' prefix and the trailing '\0'). Signed-off-by: Rob Herring <rob.herring@linaro.org> [Boris Brezillon: add a commit message] Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Steve Rae <srae@broadcom.com>
* usb: gadget: Move CONFIG_USB_GADGET to KconfigSam Protsenko2016-03-25-0/+35
| | | | | | | | | | | | | | The description was borrowed from kernel. "tristate" type was changed to "bool" (I believe we don't support modules for u-boot yet, right?). CONFIG_USB_GADGET requires CONFIG_USB to be defined too, so add it along as well. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> [trini: Add zynq_zc702 conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
* usb: gadget: composite: Correct recovery path for registerSam Protsenko2016-03-01-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | In case when usb_composite_register() failed once (for whatever reason), it will fail further even if all conditions are correct. Example: => fastboot 2 Invalid Controller Index couldn't find an available UDC g_dnl_register: failed!, error: -19 exit not allowed from main input shell. => fastboot 0 g_dnl_register: failed!, error: -22 exit not allowed from main input shell. Despite that 0 is correct index for USB controller, "fastboot 0" command will fail, because "composite" structure wasn't cleared properly on previous fail (on "fastboot 2" command). This patch fixes that erroneous behavior, allowing us to use composite even after previous failure. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
* fastboot: update error and warning messagesSteve Rae2016-02-24-5/+5
| | | | | | | Fix the formatting in error messages, and demote one error message to a warning, as it is only informational. Signed-off-by: Steve Rae <srae@broadcom.com>
* dfu: usb: f_dfu: Set deferred call for dfu_flush() functionLukasz Majewski2016-02-24-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes situation when one would like to write large file into medium with the file system (fat, ext4, etc). This change sets file size limitation to the DFU internal buffer size. Since u-boot is not supporting interrupts and seek on file systems, it becomes challenging to store large file appropriately. To reproduce this error - create large file (around 26 MiB) and sent it to the target board. Lets examine the flow of USB transactions: 0. DFU uses EP0 with 64B MPS [Max Packet Size] 1. Send file - OUT (PC->target) - dat_26MiB.img is sent with 4096 B transactions 2. Get status - OUT (PC->target) - wait for DFU_STATE_dfuDNLOAD_IDLE (0x05) sent from target board - IN transaction (target->PC) 3. The whole file content is sent to target - OUT (PC->target) with ZLP [Zero Length Packet] Now the interesting part starts: 4. OUT (PC->target) Setup transaction (request to share DFU state) 5. IN (target->PC) - reply the current DFU state - In the UDC driver the req->completion (with dfu_flush) is called after successful IN transfer. - The dfu_flush() (called from req->completion callback) saves the whole file at once (u-boot doesn't support seek on fs). Such operation takes considerable time. When the file is large - e.g. 26MiB - this time may be more than 5 seconds. 6. OUT (PC->target) - ZLP, is send in the same time when dfu_flush() writes data to eMMC memory. The dfu-util application has hard coded timeout on USB transaction completion set to 5 seconds (it uses libusb calls). When the file to store is large (e.g. 26 MiB) the time needed to write it may excess the dfu-util timeout and following error message will be displayed: "unable to read DFU status" on the HOST PC console. This change is supposed to leverage DFU's part responsible for storing files on file systems. Other DFU operations - i.e. raw/partition write to NAND and eMMC should work as before. The only functional change is the error reporting. When dfu_flush() fails the u-boot prompt will exit with error information and dfu-util application exits afterwards as well. Test HW: - Odroid XU3 (Exynos5433) - test with large file - Trats (Exynos4210) - test for regression - eMMC, raw, Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Reported-by: Alex Gdalevich <agdalevich@axion-biosystems.com> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Heiko Schocher <hs@denx.de>
* Use correct spelling of "U-Boot"Bin Meng2016-02-06-6/+6
| | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* usb: gadget: dwc2_udc_otg: modified the check condition for max packet size ↵Frank Wang2016-02-04-2/+2
| | | | | | | | | | | | | of ep_in in high speed In current high speed fastboot, fs_ep_in.wMaxPacketSize is configured 64 bytes as default, as a result, it failed to match the size at initialization stage in usb controller. Actually, hardware can support less than or equal to 512 bytes in high speed mode, so I changed the condition from '!=' to '>' to fix this issue. Signed-off-by: Frank Wang <frank.wang@rock-chips.com> Tested-by: Steve Rae <srae@broadcom.com>
* Add more SPDX-License-Identifier tagsTom Rini2016-01-19-12/+5
| | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* usb:ci_udc: Remove ULPI setting for i.MX OTG controllerYe.Li2016-01-16-11/+3
| | | | | | | | | All the i.MX6, i.MX23 and i.MX28 OTG controllers only support UTMI interface. Set to ULPI is not correct, even the controller will reject this setting in PORTSC register. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* Fix GCC format-security errors and convert sprintfs.Ben Whitten2016-01-14-3/+3
| | | | | | | | | | | With format-security errors turned on, GCC picks up the use of sprintf with a format parameter not being a string literal. Simple uses of sprintf are also converted to use strcpy. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Acked-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* ums: support multiple LUNs at onceStephen Warren2016-01-13-13/+16
| | | | | | | | | | | | | | | Extend the ums command to accept a list of block devices. Each of these will be exported as a separate LUN. An example use-case would be: ums 0 mmc 0,0.1,0.2 ... which would export LUNs for eMMC 0's user data, boot0, and boot1 HW partitions. This is useful since it allows the host access to everything on the eMMC without having to somehow stop the ums command from executing and restart it with different parameters. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* usb: s3c-otg: Rename usb/s3c_udc.h to usb/dwc2_udc.hMarek Vasut2015-12-17-3/+3
| | | | | | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames the global s3c_udc.h header to dwc2_udc.h. The rename is done automatically: $ sed -i "s/s3c_udc\.h/dwc2_udc.h/g" \ `git grep "s3c_udc\.h" | cut -d : -f 1` Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename s3c_udc_probe() functionMarek Vasut2015-12-17-1/+1
| | | | | | | | | | | | The driver is actually for the Designware DWC2 controller. This patch is the second and final to rename global symbol, the s3c_udc_probe() function. The rename is done automatically: $ sed -i "s/s3c_udc_probe/dwc2_udc_probe/g" \ `git grep s3c_udc_probe | cut -d : -f 1` Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename struct s3c_plat_otg_dataMarek Vasut2015-12-17-2/+2
| | | | | | | | | | | | The driver is actually for the Designware DWC2 controller. This patch is the first to rename global symbol, the struct s3c_plat_otg_data. The rename is done automatically: $ sed -i "s/s3c_plat_otg_data/dwc2_plat_otg_data/g" \ `git grep s3c_plat_otg_data | cut -d : -f 1` Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename USB_GADGET_S3C_UDC_OTG* to USB_GADGET_DWC2_OTG*Marek Vasut2015-12-17-2/+2
| | | | | | | | | | | | | The s3c-otg IP block is in fact a DWC2 OTG one, so finally rename the config option to make it less misleading. No functional change, just a mechanical change done using the following script: git grep USB_GADGET_S3C_UDC_OTG | cut -d : -f 1 | sort -u | \ while read line ; do sed -i "s/USB_GADGET_S3C_UDC_OTG/USB_GADGET_DWC2_OTG/g" $line ; done Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Tweak the commentsMarek Vasut2015-12-17-4/+4
| | | | | | | The driver is actually for the Designware DWC2 controller. Tweak the comments in the driver to reflect this fact. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename remaining macrosMarek Vasut2015-12-17-22/+22
| | | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames the remaining S3C_* macros to match the DWC2 naming. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename sources to dwc2_*cMarek Vasut2015-12-17-6/+6
| | | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames the local source files to dwc2_*c and adjusts the Makefile to use the new names. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename local headers to dwc2_*hMarek Vasut2015-12-17-8/+8
| | | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames the local header files to dwc2_*h and adjusts the sources to use the new names. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Change the driver name to dwc2-udcMarek Vasut2015-12-17-3/+3
| | | | | | Just change the driver name. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Zap useless externsMarek Vasut2015-12-17-4/+2
| | | | | | | The extern statements are useless, remove them. Also remove the extern ... controller, which is completely useless. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename remaining local s3c_*() functionsMarek Vasut2015-12-17-23/+23
| | | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames the remaining local s3c_*() functions to reflect this. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename s3c_udc_*() functionsMarek Vasut2015-12-17-47/+47
| | | | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames the s3c_ep_*() functions to reflect this. The function s3c_udc_probe() is a special case and is not renamed by this patch yet. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename s3c_ep_*() functionsMarek Vasut2015-12-17-11/+11
| | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames the s3c_ep_*() functions to reflect this. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename s3c_ep0_*() functionsMarek Vasut2015-12-17-14/+14
| | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames the s3c_ep0_*() functions to reflect this. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Staticize functions in s3c_udc_otg_xfer_dma.cMarek Vasut2015-12-17-7/+7
| | | | | | Just staticize the functions, they are not used outside of the file. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Staticize s3c_udc_ep_set_stallMarek Vasut2015-12-17-3/+1
| | | | | | This function is local to s3c_udc_otg_xfer_dma.c , staticize it. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename struct s3c_requestMarek Vasut2015-12-17-28/+28
| | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames struct s3c_request to reflect this. Signed-off-by: Marek Vasut <marex@denx.de>
* usb: s3c-otg: Rename struct s3c_epMarek Vasut2015-12-17-46/+46
| | | | | | | The driver is actually for the Designware DWC2 controller. This patch renames struct s3c_ep to reflect this. Signed-off-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-01 23:44:33 +0000