summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
* ENGR00327364 iMX6: Ensure that the bandgap self-bias circuit is disabled ↵Ranjani Vaidyanathan2014-09-10-0/+24
| | | | | | | | | | | | after boot. The self-bias circuit is used by the bandgap during startup. Once the bandgap has stabilized, the self-bias circuit should be disabled for best noise performance of analog blocks. Also this bit should be disabled before the chip enters STOP mode or when ever the regular bandgap is disabled. Signed-off-by: Ranjani Vaidyanathan <Ranjani.Vaidyanathan@freescale.com>
* ENGR00330792 imx: mx6: Merge anatop registers to CCM structureYe.Li2014-09-10-54/+47
| | | | | | | | | | THe anatop registers structure is duplicated with CCM structure at PLL fields. Since we are suggested not to use the name "anatop" any longer, merge the anatop registers to the CCM structure "mxc_ccm_reg" and use CCM to replace anatop. Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00329484-2 ARM:MX6: Clear Align bit in SCTLRPeng Fan2014-09-05-0/+3
| | | | | | | | | | This problem is found when debugging QuadSPI. When "A" bit is enabled, unaligned access will cause data abort exception. Actually, we do not want this exception. So clear the align bit for MX6 SOCs. Tested this code with android team colleague and did not find problem. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* ENGR00323255 Fixed QSPI randomly access timeout issueAllen Xu2014-08-29-16/+22
| | | | | | | | | | | | | | | | The QSPI clock rate was set without disabling the clock gate, the randomly glitch may mess up the clock and there will be no clock output, when kernel boot up the QSPI access will fail. To debug this issueon i.MX6SX SDB, changed the u-boot bootscript to 'sf probe; reset' to keep rebooting, the issue can be reproduced in 20 mins, set clock out register in CCM and measured TP86, found there is no clock ouput. To fix this bug, disable clock gate before changing clock rate. NOTICE: QSPI2 and GPMI_BCH_INPUT_GPMI_IO share the same clock gate, need to disable both of them. Signed-off-by: Allen Xu <b45815@freescale.com>
* ENGR00329631: imx6: fix kernel suspend reboot if keep watchdog aliveRobin Gong2014-09-02-0/+5
| | | | | | | WDZST bit is write-once only bit. So we need take care the setting in kernel ,otherwise, kernel setting will never be enabled. Signed-off-by: Robin Gong <b38343@freescale.com>
* ENGR00326277-2 imx6: watchdog: use WDOG_B mode for wdog reset in ldo-bypass modeRobin Gong2014-08-26-1/+21
| | | | | | In ldo-bypass mode, we need trigger WDOG_B pin to reset pmic in ldo-bypass mode. Signed-off-by: Robin Gong <b38343@freescale.com>
* ENGR00326277-1: imx6: ldo_bypass: fix VDDARM voltage setting violate datasheetRobin Gong2014-08-26-1/+44
| | | | | | | | | Current only set VDDARM_IN@1.175V/VDDSOC_IN@1.175V before ldo bypass switch. So untile ldo bypass switch happened, these voltage setting is set in ldo-enable mode. But in datasheet, we need 1.15V + 125mV = 1.275V for VDDARM_IN. We need to downgrade cpufreq to 400Mhz and restore after ldo bypass mode switch. Signed-off-by: Robin Gong <b38343@freescale.com>
* ENGR00326994 iMX6: Checking PLL2 PFD0 and PFD2 for periph_clk before resetYe.Li2014-08-15-7/+16
| | | | | | | | | | | | | u-boot v2014 upstream codes have a problem in pfd reset (s_init function) that imx6 Dual is not applied for PLL2 PFD2 reset. It is originated by using dynamical cpu type checking and introducing two cpu types: MXC_CPU_MX6Q and MXC_CPU_MX6D for iMX6 Dual/Quad platform. Fixed this problem by checking the pre_periph_clk_sel and pre_periph2_clk of CCM CBCMR register, if the PLL2 PFD0 or PLL2 PFD2 is used for the clock source, do not reset this PFD to avoid system hang. Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00325255 pcie:enable pcie support on imx6sx sdRichard Zhu2014-07-31-6/+36
| | | | | | | | | | | | | | Enable pcie support in uboot on imx6sx sd boards - enable_pcie_clock should be call before ssp_en is set, since that ssp_en control the phy_ref clk gate, turn on it after the source of the pcie clks are stable. - add debug info - add rx_eq of gpr12 on imx6sx - there are random link down issue on imx6sx. It's pcie ep reset issue. solution:reset ep, then retry link can fix it. Signed-off-by: Richard Zhu <r65037@freescale.com>
* ENGR00322860 iMX6SX: Add function to check M4 status before bootingYe.Li2014-07-17-0/+13
| | | | | | | Add new function "arch_auxiliary_core_check_up" to check whether M4 is already up. Therefore, avoid starting M4 again when it is running. Signed-off-by: Ye.Li <B37916@freescale.com>
* MX6: Correct calculation of PLL_SYSAndre Renaud2014-07-15-1/+1
| | | | | | | | DIV_SELECT is used as Fout = Fin * div_select / 2.0, so we should do the shift after the multiply to avoid rounding errors Signed-off-by: Andre Renaud <andre@bluewatersys.com> (cherry picked from commit 2eb268f6fd236a5ad9d51e7e47190d7994b3920f)
* mx6: soc: Update the comments of set_ldo_voltage()Fabio Estevam2014-07-15-3/+2
| | | | | | | | | | | | | | | Commit 3d622b78 (mx6: soc: Introduce set_ldo_voltage()) introduces set_ldo_voltage() function that can be used to set the voltages of any of the three LDO regulators controlled by the PMU_REG_CORE register. Prior to this commit there was a single set_vddsoc() which only configured the VDDSOC regulator. Update the comments to align with the new set_ldo_voltage() implementation. Acked-by: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> (cherry picked from commit 157f45da91b306d71dbf3a51325352dc11bf16d1)
* ENGR00321299 gis: clean csi0 input mux set bit in GPRSandor Yu2014-07-07-0/+6
| | | | | | | | When gis enable in uboot, the CSI0 input mux select setting to vadc module, clean the bit when gis disabled. Signed-off-by: Sandor Yu <R01008@freescale.com> (cherry picked from commit ae66b17b7da3be50dc81ca636b67e8e879f52e26)
* ENGR00321260-1 iMX6: Add support to get CPU serial numberYe.Li2014-07-04-0/+13
| | | | | | | | The android boot needs get_board_serial function to get the CPU uid as the serial number. Implement this function to read the uid from fuse for all iMX6 platforms. Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00320350 iMX6SLEVK: Fix build warning of PCIE Phy power downYe.Li2014-06-30-0/+2
| | | | | | | | | | | | Since the iMX6SL does not have PCIE module, should not define the function "imx_set_pcie_phy_power_down" for it. Otherwise, get the build warning below: arch/arm/cpu/armv7/mx6/soc.c:446:13: warning: 'imx_set_pcie_phy_power_down' defined but not used [-Wunused-function] static void imx_set_pcie_phy_power_down(void) Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00319965 pcie: mask the imx6sl outRichard Zhu2014-06-25-2/+7
| | | | | | | imx6sl doesn't have the pcie module, mask the pcie related codes from imx6sl. Signed-off-by: Richard Zhu <r65037@freescale.com>
* ENGR00319415 pcie: random link down issue after warm-rstRichard Zhu2014-06-24-0/+18
| | | | | | | | | | | | | | | | | There are about 0.02% percentage on some imx6q/dl/solo hw boards, random pcie link down when warm-reset is used. Make sure to clear the ref_ssp_en bit16 of gpr1 before warm-rst, and set ref_ssp_en after the pcie clks are stable to workaround it. rootcause: * gpr regisers wouldn't be reset by warm-rst, while the ref_ssp_en is required to be reset by pcie. (work-around in u-boot) * ref_ssp_en should be set after pcie clks are stable. (work-around in kernel) Signed-off-by: Richard Zhu <r65037@freescale.com>
* ENGR00315894-77 mx6 soc: Add vadc power up/down functionYe.Li2014-06-17-0/+46
| | | | | | | Add vadc power up/down function. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315894-76 mx6 clock: Add vadc clock enable functionYe.Li2014-06-17-0/+9
| | | | | | | Add vadc clock enable function. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315894-71 iMX6SX Update registers and clock for displayYe.Li2014-06-17-0/+199
| | | | | | Add registers and clock functions to enable/set LCDIF clock and LVDS. Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315894-70 iMX6SX:Video Update MXS LCDIF driverYe.Li2014-06-17-2/+2
| | | | | | | | | | | | Add a new interface "mxs_lcd_panel_setup" to setup fb parameters and specifies the LCDIF controller for multiple controllers of iMX6SX. Pass fb parameters via "videomode" env remains work if the new interface is not called before video initialization. Modify LCDIF clock interface "mxs_set_lcdclk" to support multiple LCDIF controllers on iMX6SX. Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315894-57 iMX6SX: Add M4 boot support at soc levelYe.Li2014-06-17-0/+25
| | | | | | | | | Implement the override function "arch_auxiliary_core_up" to boot Cortex-M4 by executing command "bootaux". The parameter "boot_private_data" points to fields where stores the stack address and PC address for M4 to run. Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315894-54 iMX6SX/SL: Modify SOC to support two ENETYe.Li2014-06-17-4/+64
| | | | | | | | | | | | | | | | | | | | | iMX6SX has different enet system clocks with iMX6SL, and has two ENET controllers. So update clocks and soc APIs accordingly to support this features. 1. Modify the clock API "enable_enet_clock" to enable enet system clock for enet controllers. 2. Enet RGMII TX clock source may come from external or internal PLL. By default, use the external phy CLK_25M output as TX clock source. When using internal PLL as source, the function enable_fec_anatop_clock must be called to enable clock for each enet controller. 3. Modify the MAC address function "imx_get_mac_from_fuse" to get either ENET MAC address. 4. Add configuration "CONFIG_FEC_MXC_25M_REF_CLK" to enable ENET 25Mhz reference clock. 5. Modify imx6slevk BSP to fit the new APIs. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315894-51 iMX6SX: Add QuadSPI clock enable functionYe.Li2014-06-17-0/+42
| | | | | | | Enable the clock for QuadSPI controllers. Must be called at initialization. Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315894-48 iMX6SX: Add iMX6SX SoC supportYe.Li2014-06-17-2/+47
| | | | | | | | | | | Adding clks, pinmux, memory map, etc for iMX6SoloX. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315894-35 i.mx6: Fix issue in HAB clock settingYe.Li2014-06-17-9/+9
| | | | | | Should use the address of one register when calling "readl"/"writel". Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315894-19 iMX6 Disable the L2 before chaning the PL310 latencyYe.Li2014-06-17-0/+3
| | | | | | | | | | | The Latency parameters of PL310 Tag RAM latency control register and Data RAM Latency control register are set in L2 cache enable. Setting these registers must have PL310 not enabled. But when using Plugin mode boot, the PL310 is enabled by bootrom. Thus, disable the PL310 before this setting. Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315894-11 i.mx6:shutdown vddpu and pcie phy to save powerYe.Li2014-06-17-0/+31
| | | | | | | | shutdown vddpu and pcie phy to save power Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* ENGR00315499-21 HDMI: splash screen function enhancementNitin Garg2014-06-13-1/+11
| | | | | | | | | | | | -Change HDMI video mode to VGA. -Add pixel clock fraction part setting in IPU driver, fix video mode timing issue. -Add overflow state clear workaround, fix kernel hang in HDMI driver issue. -Correct IPU clock to 264MHz. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* ENGR00315499-10 ARM:imx6:sabresd/sabreauto Add android fastboot supportingNitin Garg2014-06-13-0/+94
| | | | | | | | | | | | | | | | | | Support android features: fastboot, booti command and recovery for sabresd SD, sabresd eMMC, sabreauto SD, sabreauto NAND. For all booting media (SD, eMMC, NAND), inherits the partitions layout from v2009.08. Fastboot will detect the booting media to replace hardcoding fastboot device. SATA is not supported. FDT is supported to use the "unused" fields in bootimg header which requires the FDT to be combined into the boot.img. For non-FDT boot.img, the "unused" fields should left to NULL and is compatible to boot. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* ENGR00315499-6 ARM:imx6: Add USB gadget driver imx_udc to support Android ↵Nitin Garg2014-05-27-0/+50
| | | | | | | | | | | | | | fastboot Android fastboot leans on the USB gadget driver to communicate with host. Porting the imx_udc driver from v2009.08 with two changes: adding resource/memory release APIs and replacing the uncached memory with cache flush&invalidate operations. Pins and Clocks initialization are added to support boards: mx6qdlsabresd, mx6qdlsabreauto, mx6slevk Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* ENGR00315499-5: Support i.MX6 1.2GHz via LDO bypassNitin Garg2014-05-27-0/+70
| | | | | | | | Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz, enable LDO bypass and setup PMIC voltages. LDO bypass is dependent on the flatten device tree file. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* ENGR00315499-3: Support i.MX6 HAB authentication of kernel imageNitin Garg2014-05-27-7/+287
| | | | | | | Support HAB authentication of kernel or secondary images via bootm or hab_auth_img u-boot command. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* ENGR00315499-1: Add i.MX6 CPU temperature sensor supportNitin Garg2014-05-27-1/+136
| | | | | | Support CPU temperature sensors on i.MX6 SoC. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-08-312/+2
|\ | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile include/configs/trats.h include/configs/trats2.h include/mmc.h
| * tegra: fix Makefile to pass per-file CFLAGSMasahiro Yamada2014-03-31-1/+1
| | | | | | | | | | | | | | | | | | | | | | Since Kbuild was introduced, warmboot_avp.o has been compiled without -march=armv4t. Makefile should be adjusted to pass a per-file option. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stephen Warren <swarren@nvidia.com> Cc: Tom Warren <twarren@nvidia.com>
| * kbuild: move asm-offsets.c from SoC directory to arch/$(ARCH)/libMasahiro Yamada2014-03-28-310/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot has supported two kinds of asm-offsets.h. One is generic for all architectures and its source is located at ./lib/asm-offsets.c. The other is SoC specific and its source is under SoC directory. The problem here is that only boards with SoC directory can use the asm-offsets infrastructure. Putting asm-offsets.c right under CPU directory does not work. Now a new demand is coming. PowerPC folks want to use asm-offsets. But no PowerPC boards have SoC directory. It seems inconsistent that some boards add asm-offsets.c to SoC directoreis and some to CPU directories. It looks more reasonable to put asm-offsets.c under arch/$(ARCH)/lib. This commit merges asm-offsets.c under SoC directories into arch/$(ARCH)/lib/asm-offsets.c. By the way, I doubt the necessity of some entries in asm-offsets.c. I am leaving refactoring to the board maintainers. Please check "TODO" in the comment blocks in arch/{arm,nds32}/lib/asm-offsets.c. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Yuantian Tang <Yuantian.Tang@freescale.com>
| * kbuild: Rename UIMAGE to MKIMAGEMarek Vasut2014-03-28-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot uses the 'mkimage' tool to produce various image types, not only uImage image type. Rename the invocation name from UIMAGE to MKIMAGE. The following command was used to do the replacement: git grep 'quiet_cmd_mkimage.* = UIMAGE' | cut -d : -f 1 | \ xargs -i sed -i "s@\(quiet_cmd_mkimage\)\(.*\) = UIMAGE @\1\2 = MKIMAGE@" {} Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
* | arm64 patch: gicv3 supportDavid Feng2014-04-08-114/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch add gicv3 support to uboot armv8 platform. Changes for v2: - rename arm/cpu/armv8/gic.S with arm/lib/gic_64.S - move smp_kick_all_cpus() from gic.S to start.S, it would be implementation dependent. - Each core initialize it's own ReDistributor instead of master initializeing all ReDistributors. This is advised by arnab.basu <arnab.basu@freescale.com>. Signed-off-by: David Feng <fenghua@phytium.com.cn>
* | ARMv8: fix bug for flush data cache by set/wayLeo Yan2014-04-07-3/+1
| | | | | | | | | | | | | | | | | | When flush the d$ with set/way instruction, it need calculate the way's offset = log2(Associativity); but in current uboot's code, it use below formula to calculate the offset: log2(Associativity * 2 - 1), so finally it cannot flush data cache properly. Signed-off-by: Leo Yan <leoy@marvell.com>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-04-07-1/+6
|\ \
| * | ARM: Add workaround for Cortex-A9 errata 761320Nitin Garg2014-04-07-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Full cache line writes to the same memory region from at least two processors might deadlock the processor. Exists on r1, r2, r3 revisions. Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | ARM: Add workaround for Cortex-A9 errata 794072Nitin Garg2014-04-07-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | A short loop including a DMB instruction might cause a denial of service on another processor which executes a CP15 broadcast operation. Exists on r1, r2, r3, r4 revisions. Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
* | | armv8/cache: Change cache invalidate and flush functionYork Sun2014-04-07-20/+46
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When SoC first boots up, we should invalidate the cache but not flush it. We can use the same function for invalid and flush mostly, with a wrapper. Invalidating large cache can ben slow on emulator, so we postpone doing so until I-cache is enabled, and before enabling D-cache. Signed-off-by: York Sun <yorksun@freescale.com> CC: David Feng <fenghua@phytium.com.cn>
* | | armv8/cache: Flush D-cache, invalidate I-cache for relocationYork Sun2014-04-07-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | If D-cache is enabled, we need to flush it, and invalidate i-cache before jumping to the new location. This should be done right after relocation. Signed-off-by: York Sun <yorksun@freescale.com> CC: David Feng <fenghua@phytium.com.cn>
* | | armv8/cache: Consolidate setting for MAIR and TCRYork Sun2014-04-07-25/+19
| | | | | | | | | | | | | | | | | | | | | | | | Move setting for MAIR and TCR to cache_v8.c, to avoid conflict with sub-architecture. Signed-off-by: York Sun <yorksun@freescale.com> CC: David Feng <fenghua@phytium.com.cn>
* | | arm: Handle .gnu.hash section in ldscriptsAndreas Färber2014-04-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Avoids "could not find output section .gnu.hash" ld.bfd errors on openSUSE. Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | | socfpga: Adding Clock Manager driverChin Liang See2014-04-07-1/+451
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | Clock Manager driver will be called to reconfigure all the clocks setting based on user input. The input are passed to Preloader through handoff files Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> CC: Pavel Machek <pavel@denx.de> Cc: Dinh Nguyen <dinguyen@altera.com> Acked-by: Pavel Machek <pavel@denx.de>
* | arm: mxs: Add support for generating signed BootStreamMarek Vasut2014-04-04-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the groundwork for generating signed BootStream, which can be used by the HAB library in i.MX28. We are adding a new target, u-boot-signed.sb , since the process for generating regular non-signed BootStream is much easier. Moreover, the signed bootstream depends on external _proprietary_ _binary-only_ tool from Freescale called 'cst', which is available only under NDA. To make things even uglier, the CST or HAB mandates a kind-of circular dependency. The problem is, unlike the regular IVT, which is generated by mxsimage, the IVT for signed boot must be generated by hand here due to special demands of the CST. The U-Boot binary (or SPL binary) and IVT are then signed by the CST as a one block. But here is the problem. The size of the entire image (U-Boot, IVT, CST blocks) must be appended at the end of IVT. But the size of the entire image is not known until the CST has finished signing the U-Boot and IVT. We solve this by expecting the CST block to be always 3904B (which it is in case two files, U-Boot and the hand-made IVT, are signed in the CST block). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-arm into masterStefano Babic2014-04-04-84/+85
|\ \ | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/mxsimage.mx23.cfg arch/arm/cpu/arm926ejs/mxs/mxsimage.mx28.cfg Signed-off-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-11-19 15:47:29 +0000