summaryrefslogtreecommitdiff
path: root/arch/arm/cpu
Commit message (Collapse)AuthorAgeLines
* gpio: Replace ARM gpio.h with the common API in include/asm-genericJoe Hershberger2012-01-09-16/+19
| | | | | | | | | | | | | | | | ARM boards should use the generic GPIO API This means changing gpio to unsigned type Remove the unused gpio_toggle() function which is not part of the API Comment that free should not modify pin state Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> fixed merge conflict in da8xx_gpio.c, tegra2_gpio.c, and extended to the new mxs_gpio.c. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* tegra: Add support for UART init in cpu board.cSimon Glass2011-12-24-0/+51
| | | | | | | | | | We add a way of initialising the selected of UARTs prior to relocation. Boards can use the board_init_uart_f() instead of repeating this code themselves. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Add a function mux featureSimon Glass2011-12-24-1/+59
| | | | | | | | | | | | funcmux permits selection of config options for particular peripherals, such as the pins that are used for that peripheral, if there are several options. Add UART selection to start with. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: add clock_ll_start_uart() to enable UART prior to relocSimon Glass2011-12-24-0/+14
| | | | | | | | | | Most boards will want to enable a UART early. This function provides that feature in Tegra architecture code so the code does not need to be copied on every board. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Move clock_early_init() to arch_cpu_init()Simon Glass2011-12-24-0/+3
| | | | | | | | | The clock init is not board specific, so move it into the cpu code. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Move cpu_init_cp15() to arch_cpu_init()Simon Glass2011-12-24-0/+4
| | | | | | | | | This call is more of an architecture requirement than a board one, so move it there. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra2: Always build with USE_PRIVATE_LIBGCC=yes.Thierry Reding2011-12-24-0/+2
| | | | | | | | | | The AVP on Tegra2 doesn't boot properly when U-Boot is linked against the GCC provided libgcc. To work around this, always build and link against a private libgcc for Tegra2-based boards. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* arm, davinci: Fix build warnings for cam_enc_4xxChristian Riesch2011-12-24-2/+3
| | | | | | | | | | | | This patch fixes a build warning for the cam_enc_4xx board introduced by commit d6ec0c0dfc70447cf615ae80a952da81f73f16b4: spl.c:35:13: warning: 'gdata' defined but not used spl.c:36:13: warning: 'bdata' defined but not used Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Tom Rini <trini@ti.com> Cc: Heiko Schocher <hs@denx.de>
* arm, davinci: Add SPL support for DA850 SoCsChristian Riesch2011-12-24-2/+35
| | | | | | | | | | This code adds an SPL for booting from SPI flash on DA850 SoCs. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
* arm: Tegra: fix undefined instruction hang immediately after resetTom Warren2011-12-21-0/+2
| | | | | | | | | | | commit 0d479b53 (Aneesh V) added code for OMAP4 that doesn't execute on Tegra, due to the AVP (ARM7TDI) not having a CP15. Result was an undefined instruction hang just after reset. Signed-off-by: Tom Warren <twarren@nvidia.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Acked-by: Aneesh V <aneesh@ti.com>
* add print_cpuinfo to s3c24x0David Müller (ELSOFT AG)2011-12-19-0/+55
| | | | | | | | | | | | Hello This patch adds support for "print_cpuinfo" on Samsung s3c24x0 based targets. If activated by "#define CONFIG_DISPLAY_CPUINFO", the chip ID and the 3 main cpu frequencies will be displayed. Dave Signed-off-by: David Müller <d.mueller@elsoft.ch>
* davinci: Fixed wrong timebase clock frequency.Manfred Rudigier2011-12-19-1/+1
| | | | Signed-off-by: Manfred Rudigier <manfred.rudigier@omicron.at>
* arm926ejs: remove noop flush_dcache_all functionIlya Yanok2011-12-19-5/+0
| | | | | | | | | | | | | | | | Commit 2f3427c added noop cache functions implementation for arm926ejs to fix compilation of drivers depending on these functions (DaVinci EMAC in particular). Unfortunately, the bug was introduced: noop implementation calls dcache_disable which calls flush_dcache_all which in turn calls dcache_disable thus creating an infinite loop. This patch removes noop implementation for flush_dcache_all, we already have default one in arch/arm/lib/cache.c and it should be used instead. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Tested-by: Matthias Weisser <weisserm@arcor.de>
* USB: MX5: add helper functions to enable USB clocksWolfgang Grandegger2011-12-11-0/+72
| | | | | | | | | | Signed-off-by: Wolfgang Grandegger <wg@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Remy Bohmer <linux@bohmer.net> Cc: Wolfgang Grandegger <wg@denx.de> Cc: Jason Liu <r64343@freescale.com> V2: Fix spacing in crm_regs.h
* pxa: activate the first usb host port on pxa27x by defaultStefan Herbrechtsmeier2011-12-11-2/+2
| | | | | | | | The pxa27x has 3 usb host ports. Activate all by default. Signed-off-by: Stefan Herbrechtsmeier <sherbrec@cit-ec.uni-bielefeld.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: Remy Bohmer <linux@bohmer.net>
* pxa: fix usb host register mismatchStefan Herbrechtsmeier2011-12-11-1/+1
| | | | | | Signed-off-by: Stefan Herbrechtsmeier <sherbrec@cit-ec.uni-bielefeld.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: Remy Bohmer <linux@bohmer.net>
* arm, davinci: Use lldiv for the 64-bit divisions in timer.cChristian Riesch2011-12-10-2/+4
| | | | | | | Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Tom Rini <trini@ti.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* M28: Cleanup memsize.o OOT buildMarek Vasut2011-12-09-23/+9
| | | | | | | | | | | | | | | | The current way memsize.c is built just made a symlink into the directory with SPL and then compiled it like any other file there. This was bad as that broke the out-of-tree build. The new way introduced in this patch uses the standard spl/Makefile methods (CONFIG_SPL_LIBCOMMON_SUPPORT / CONFIG_SPL_LIBGENERIC_SUPPORT) to let files in common/ be built. Because common/Makefile says memsize.c is always built (SPL and non-SPL build), this fixes our issue with memsize.c out-of-tree build. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* i.MX28: Move SPL to arch/arm/cpu/arm926ejs/mx28Marek Vasut2011-12-09-0/+1611
| | | | | | | | | | This moves SPL to common location so it can be reused by multiple boards. Also, this commit adjusts M28 SoM to avoid breakage due to the move. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* i.mx: add the initial support for freescale i.MX6Q processorJason Liu2011-12-09-0/+591
| | | | | | | | i.MX6Q is freescale quad core processors with ARM cortex_a9 complex. This patch is to add the initial support for this processor. Signed-off-by: Jason Liu <jason.hui@linaro.org> Cc:Stefano Babic <sbabic@denx.de>
* i.mx: introduce the armv7/imx-common folderJason Liu2011-12-09-86/+165
| | | | | | | | | | | | | | | | | In order to support the coming MX6 platform and to reducde the duplicated code, we had better move some common files or functions to the imx-common folder for sharing. This patch does the following: - move speed.c file from armv7/mx5/speed.c to armv7/imx-common/speed.c - move armv7/mx5/timer.c to armv7/imx-common/timer.c, no any new feature added but just fix the checkpatch errors in the old file and remove the CONFIG_SYS_MX5_CLK32 reference in the file - create one new file cpu.c file to store the common function with i.mx5/6 Signed-off-by: Jason Liu <jason.hui@linaro.org> Cc:Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de>
* S5PC2XX: Rename S5pc2XX to exynosChander Kashyap2011-12-09-25/+25
| | | | | | | | | | | | | | As per new naming convention for Samsung SoC's, all Cortex-A9 and Cortex-A15 based SoC's will be classified under the name Exynos. Cortex-A9 and Cortex-A15 based SoC's will be sub-classified as Exynos4 and Exynos5 respectively. In order to better adapt and reuse code across various upcoming Samsung Exynos based boards, all uses of s5pc210 prefix/suffix/directory-names are renamed in this patch. s5pc210 is renamed as exynos4210 and S5PC210/s5pc210 suffix/prefix are renamed as exynos4/EXYNOS4. Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* tegra2: Don't use board pointer before it is set upSimon Glass2011-12-09-9/+1
| | | | | | | | | | In board_init_f() the gd->bd pointer is not valid when dram_init() is called. This only avoids dying because DRAM is at zero on Tegra2. The common ARM routine sets up the banks in the same way anyway, so we can just remove this code. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra2: Remove unneeded 'dynamic ram size' messageSimon Glass2011-12-09-3/+1
| | | | | | | | | | | | | | | | | | | | | | | This message is not required, since it is followed by an 'official' U-Boot message. U-Boot 2011.03-00048-gd7cb0d3 (May 11 2011 - 17:17:23) TEGRA2 Board: NVIDIA Seaboard dynamic ram_size = 1073741824 DRAM: 1 GiB becomes: TEGRA2 Board: NVIDIA Seaboard DRAM: 1 GiB This is a separate commit since it changes behavior. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra2: Remove unneeded boot codeSimon Glass2011-12-09-147/+1
| | | | | | | | Since we have cache support built in we can remove Tegra's existing cache initialization code amd other related dead code. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* arm: Move CP15 init out of cpu_init_crit()Simon Glass2011-12-09-6/+18
| | | | | | | | | | | | | | | | | | | | Some SOCs have do not start up with their 'main' CPU. The first U-Boot code may then be executed with a CPU which does not have a CP15, or not a useful one. Here we split the initialization of CP15 into a separate call, which can be performed later if required. Once the main CPU is running, you should call cpu_init_cp15() to perform this init as early as possible. Existing ARMv7 boards which define CONFIG_SKIP_LOWLEVEL_INIT should not need to change, this CP15 init is still skipped in that case. The only impact for these boards is that the cpu_init_cp15() will be available even if it is never used on these boards. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra2: Simplify tegra_start() boot pathSimon Glass2011-12-09-25/+37
| | | | | | | | | | | | | | | | | The Tegra2 boot path is more complicated than it needs to be. Since we want to move to building most of U-Boot with ARMv7 and only a small part with ARMv4T (for AVP) it should be as simple as possible. This makes tegra2_start() into a simple function which either does AVP init or A9 init depending on which core is running it. Both cores now following the same init path, beginning at _start, and the special Tegra2 boot path code is no longer required. Only two files need to be built for ARMv4T, and this is handled in the Tegra2 CPU Makefile. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra2: Add arch_cpu_init() to fire up Cortex-A9Simon Glass2011-12-09-0/+21
| | | | | | | | | | | | | We want to move away from a special Tegra2 start-up, and just use arch_cpu_init() instead. However, if we run board_init_f() from boot we need to build it for ARMv4T, since the Tegra's AVP start-up CPU does not support ARMv7. The effect of this is to do the AVP init earlier, and in arch_cpu_init(), rather that board_early_init_f(). Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Fix warnings in arch/arm/cpu/arm920t/s3c24x0/usb_ohci.cSimon Glass2011-12-09-8/+12
| | | | | | | | | | | | | | | | | Sorry if this is already fixed somewhere - I could not find it. This fixes these warnings: usb_ohci.c: In function 'submit_control_msg': usb_ohci.c:1081: warning: dereferencing pointer 'data_buf.76' does break strict-aliasing rules usb_ohci.c:1081: note: initialized from here usb_ohci.c:1084: warning: dereferencing pointer 'data_buf.76' does break strict-aliasing rules usb_ohci.c:1084: note: initialized from here usb_ohci.c:1087: warning: dereferencing pointer 'data_buf.76' does break strict-aliasing rules usb_ohci.c:1087: note: initialized from here Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
* arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warningsAnatolij Gustschin2011-12-06-5/+3
| | | | | | | | | | | | | | | | Fix: clocks-common.c: In function 'setup_dplls': clocks-common.c:256:6: warning: variable 'sysclk_ind' set but not used [-Wunused-but-set-variable] clocks-common.c: In function 'setup_non_essential_dplls': clocks-common.c:292:6: warning: variable 'sysclk_ind' set but not used [-Wunused-but-set-variable] Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: sricharan <r.sricharan@ti.com> Cc: Tom Rini <trini@ti.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Tom Rini <trini@ti.com>
* arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warningsAnatolij Gustschin2011-12-06-2/+3
| | | | | | | | | | | | | | Fix: spl.c: In function 'jump_to_image_no_args': spl.c:103: warning: assignment makes pointer from integer without a cast spl.c:105: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: sricharan <r.sricharan@ti.com> Cc: Tom Rini <trini@ti.com> Acked-by: Marek Vasut <marek.vasut@gmail.com> Acked-by: Tom Rini <trini@ti.com>
* MX: serial_mxc: cleanup removing nasty #ifdefStefano Babic2011-12-06-4/+0
| | | | | | | | | | | | | | | | | | The serial driver for iMX SOCs is continuosly changed if a new SOC or not yet used port is used. CONFIG_SYS_<SOC>_<UART Port> defines were used only to find the base address for the selected UART. Instead of that, move the base address to the board configuration file and drop all #ifdef from driver. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Marek Vasut <marek.vasut@gmail.com> CC: Wolfgang Denk <wd@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com> CC: Helmut Raiger <helmut.raiger@hale.at> CC: John Rigby <jcrigby@gmail.com> CC: Matthias Weisser <weisserm@arcor.de> CC: Jason Liu <jason.hui@linaro.org> Acked-by: Jason Liu <jason.hui@linaro.org>
* mx5: Correct a warning in clock.cSimon Glass2011-12-06-1/+1
| | | | | | | | | | | | | This corects the warning below, obtained with my gcc 4.6 compiler. arch/arm/cpu/armv7/mx5/libmx5.o: In function `decode_pll': arch/arm/cpu/armv7/mx5/clock.c:94: undefined reference to `__aeabi_uldivmod' I am not able to test this on MX5x hardware, but it does improve the MAKEALL output for me. You may already have a similar patch, but I cannot see it on the list. Signed-off-by: Simon Glass <sjg@chromium.org>
* OMAP3: Add SPL_BOARD_INIT hookTom Rini2011-12-06-0/+9
| | | | | | | | Add an SPL_BOARD_INIT hook and for OMAP3 have it turn on i2c. OMAP4 doesn't need i2c enabled in SPL. Enable SPL_BOARD_INIT on devkit8000. Cc: Frederik Kriewitz <frederik@kriewitz.eu> Signed-off-by: Tom Rini <trini@ti.com>
* OMAP3 SPL: Add identify_nand_chip functionTom Rini2011-12-06-0/+90
| | | | | | | | | | A number of boards are populated with a PoP chip for both DDR and NAND memory. Other boards may simply use this as an easy way to identify board revs. So we provide a function that can be called early to reset the NAND chip and return the result of NAND_CMD_READID. All of this code is put into spl_id_nand.c and controlled via CONFIG_SPL_OMAP3_ID_NAND. Signed-off-by: Tom Rini <trini@ti.com>
* OMAP3 SPL: Rework memory initalization and devkit8000 supportTom Rini2011-12-06-13/+15
| | | | | | | | | This changes to making the board be responsible for providing the memory initialization timings in SPL and converts the devkit8000 to this framework. In SPL we try and initialize both CS0 and CS1. Cc: Frederik Kriewitz <frederik@kriewitz.eu> Signed-off-by: Tom Rini <trini@ti.com>
* OMAP3: Change mem_ok to clear again after reading backTom Rini2011-12-06-0/+1
| | | | | | | | It's possible to need to call this function on the same banks multiple times so we want to be sure that 'pos A' is cleared out again at the end. Signed-off-by: Tom Rini <trini@ti.com>
* OMAP3: Add a helper function to set timings in SDRCTom Rini2011-12-06-55/+61
| | | | | | | | Since we go through the sequence to setup the SDRC timings more than once, break this logic out into its own function and have that function call mem_ok() to make sure the memory is usable. Signed-off-by: Tom Rini <trini@ti.com>
* OMAP3: Update SDRC dram_init to always call make_cs1_contiguous()Tom Rini2011-12-06-12/+11
| | | | | | | | | | | | | We update the comment in make_cs1_contiguous() to be a little bit more clear (it's been copy/pasted from other silicons) and then explain in dram_init() why we need to always try this. Note that in the previous behavior we were always calling this on boards that never had cs1 populated anyhow so making sure we do this always is fine and will correct things like omap3evm detecting an invalid amount of memory (384MB). Signed-off-by: Tom Rini <trini@ti.com>
* omap3: mem: Comment enable_gpmc_cs_config moreTom Rini2011-12-06-3/+9
| | | | | | | Expand the "enable the config" comment to explain what the bit shifts are and define out two of the magic numbers. Signed-off-by: Tom Rini <trini@ti.com>
* arm, davinci: move misc function in arch treeHeiko Schocher2011-12-06-1/+151
| | | | | | | | | | | | move the board/davinci/common/misc.c file to arch/arm/cpu/arm926ejs/davinci/misc.c, so all davinci boards can use this functions. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <tom.rini@gmail.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Christian Riesch <christian.riesch@omicron.at>
* arm, davinci, da850: add uart1 tx rx pinmux configHeiko Schocher2011-12-06-0/+5
| | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Tom Rini <trini@ti.com> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <tom.rini@gmail.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Christian Riesch <christian.riesch@omicron.at>
* arm, davinci: Remove duplication of pinmux configuration codeChristian Riesch2011-12-06-28/+8
| | | | | | | | | | This patch replaces the pinmux configuration code in arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c by the code from arch/arm/cpu/arm926ejs/davinci/pinmux.c. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sandeep Paulraj <s-paulraj@ti.com> Acked-by: Heiko Schocher <hs@denx.de>
* arm, da850: Add pinmux configurations to the arch treeChristian Riesch2011-12-06-0/+167
| | | | | | | | | | | | | Up to now nearly every davinci board has separate code for the definition of pinmux configurations. This patch adds pinmux configurations for the DA850 SoCs to the arch tree which may later be used for all DA850 based boards. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Heiko Schocher <hs@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Acked-by: Heiko Schocher <hs@denx.de>
* arm, davinci: Move pinmux functions from board to arch treeChristian Riesch2011-12-06-1/+106
| | | | | | | | | | | | | Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Heiko Schocher <hs@denx.de> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Syed Mohammed Khasim <sm.khasim@gmail.com> Cc: Sughosh Ganu <urwithsughosh@gmail.com> Cc: Nick Thompson <nick.thompson@ge.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Heiko Schocher <hs@denx.de> Acked-by: Nick Thompson <nick.thompson@ge.com>
* arm, arm926ejs: always do cpu critical initsHeiko Schocher2011-12-06-4/+2
| | | | | | | | | | | | | always do the cpu critical inits in cpu_init_crit, and only jump to lowlevel_init, if CONFIG_SKIP_LOWLEVEL_INIT is not defined. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Wolfgang Denk <hs@denx.de> Cc: Sandeep Paulraj <s-paulraj@ti.com> Cc: Tom Rini <tom.rini@gmail.com> Cc: Christian Riesch <christian.riesch@omicron.at>
* AM35xx: add EMAC supportIlya Yanok2011-12-06-0/+45
| | | | | | AM35xx has DaVinci-compatible EMAC. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* arm926ejs: add noop implementation for dcache opsIlya Yanok2011-12-06-1/+76
| | | | | | | | Added noop implementation for dcache operations that will buzz about missing real implementation and disable the dcache. This fixes compilation of DaVinci EMAC driver on arm926ejs. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* davinci_emac: move arch-independent defines to separate headerIlya Yanok2011-12-06-0/+4
| | | | | | | | | | | DaVinci EMAC is found not only on DaVinci SoCs but on some OMAP3 SoCs also. This patch moves common defines from arch-davinci/emac_defs.h to drivers/net/davinci_emac.h DaVinci specific PHY drivers hacked to include the new header. We might want to switch to phylib in future. Signed-off-by: Ilya Yanok <yanok@emcraft.com>
* omap4: fix IO settingAneesh V2011-12-06-1/+6
| | | | | | | | | | | | The value from TRIM is not working for some 4430 silicons. So, override with hw team recommended value. However, for 4460 TRIM value shall be used as long as the part is trimmed This fixes boot problem on some OMAP4430 ES2.0 Panda boards out there. Cc: Steve Sakoman <sakoman@gmail.com> Signed-off-by: Aneesh V <aneesh@ti.com>
generated by cgit v1.1 at 2024-11-10 00:43:28 +0000