summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/mpl/vcma9/vcma9.c41
-rw-r--r--board/samsung/smdk2400/smdk2400.c28
-rw-r--r--board/samsung/smdk2410/smdk2410.c36
-rw-r--r--board/sbc2410x/sbc2410x.c44
-rw-r--r--board/trab/cmd_trab.c28
-rw-r--r--board/trab/rs485.c40
-rw-r--r--board/trab/trab.c67
-rw-r--r--board/trab/trab_fkt.c142
-rw-r--r--board/trab/tsc2000.c39
-rw-r--r--board/trab/tsc2000.h86
-rw-r--r--board/trab/vfd.c90
11 files changed, 327 insertions, 314 deletions
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index eaeec82..978e6fd 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -78,42 +78,43 @@ int board_init(void)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* to reduce PLL lock time, adjust the LOCKTIME register */
- clk_power->LOCKTIME = 0xFFFFFF;
+ clk_power->locktime = 0xFFFFFF;
/* configure MPLL */
- clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+ clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
/* some delay between MPLL and UPLL */
delay (4000);
/* configure UPLL */
- clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+ clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
/* some delay between MPLL and UPLL */
delay (8000);
/* set up the I/O ports */
- gpio->GPACON = 0x007FFFFF;
- gpio->GPBCON = 0x002AAAAA;
- gpio->GPBUP = 0x000002BF;
- gpio->GPCCON = 0xAAAAAAAA;
- gpio->GPCUP = 0x0000FFFF;
- gpio->GPDCON = 0xAAAAAAAA;
- gpio->GPDUP = 0x0000FFFF;
- gpio->GPECON = 0xAAAAAAAA;
- gpio->GPEUP = 0x000037F7;
- gpio->GPFCON = 0x00000000;
- gpio->GPFUP = 0x00000000;
- gpio->GPGCON = 0xFFEAFF5A;
- gpio->GPGUP = 0x0000F0DC;
- gpio->GPHCON = 0x0028AAAA;
- gpio->GPHUP = 0x00000656;
+ gpio->gpacon = 0x007FFFFF;
+ gpio->gpbcon = 0x002AAAAA;
+ gpio->gpbup = 0x000002BF;
+ gpio->gpccon = 0xAAAAAAAA;
+ gpio->gpcup = 0x0000FFFF;
+ gpio->gpdcon = 0xAAAAAAAA;
+ gpio->gpdup = 0x0000FFFF;
+ gpio->gpecon = 0xAAAAAAAA;
+ gpio->gpeup = 0x000037F7;
+ gpio->gpfcon = 0x00000000;
+ gpio->gpfup = 0x00000000;
+ gpio->gpgcon = 0xFFEAFF5A;
+ gpio->gpgup = 0x0000F0DC;
+ gpio->gphcon = 0x0028AAAA;
+ gpio->gphup = 0x00000656;
/* setup correct IRQ modes for NIC */
- gpio->EXTINT2 = (gpio->EXTINT2 & ~(7<<8)) | (4<<8); /* rising edge mode */
+ /* rising edge mode */
+ gpio->extint2 = (gpio->extint2 & ~(7<<8)) | (4<<8);
/* select USB port 2 to be host or device (fix to host for now) */
- gpio->MISCCR |= 0x08;
+ gpio->misccr |= 0x08;
/* init serial */
gd->baudrate = CONFIG_BAUDRATE;
diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c
index 1294d3f..895bd77 100644
--- a/board/samsung/smdk2400/smdk2400.c
+++ b/board/samsung/smdk2400/smdk2400.c
@@ -52,30 +52,30 @@ int board_init (void)
/* memory and cpu-speed are setup before relocation */
/* change the clock to be 50 MHz 1:1:1 */
- clk_power->MPLLCON = 0x5c042;
- clk_power->CLKDIVN = 0;
+ clk_power->mpllcon = 0x5c042;
+ clk_power->clkdivn = 0;
/* set up the I/O ports */
- gpio->PACON = 0x3ffff;
- gpio->PBCON = 0xaaaaaaaa;
- gpio->PBUP = 0xffff;
- gpio->PECON = 0x0;
- gpio->PEUP = 0x0;
+ gpio->pacon = 0x3ffff;
+ gpio->pbcon = 0xaaaaaaaa;
+ gpio->pbup = 0xffff;
+ gpio->pecon = 0x0;
+ gpio->peup = 0x0;
#ifdef CONFIG_HWFLOW
/*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */
/* 10, 10, 00, 00, 10, 00, 10 */
- gpio->PFCON=0xa22;
+ gpio->pfcon = 0xa22;
/* Disable pull-up on Rx, Tx, CTS and RTS pins */
- gpio->PFUP=0x35;
+ gpio->pfup = 0x35;
#else
/*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */
/* 00, 00, 00, 00, 10, 00, 10 */
- gpio->PFCON = 0x22;
+ gpio->pfcon = 0x22;
/* Disable pull-up on Rx and Tx pins */
- gpio->PFUP = 0x5;
+ gpio->pfup = 0x5;
#endif /* CONFIG_HWFLOW */
- gpio->PGCON = 0x0;
- gpio->PGUP = 0x0;
- gpio->OPENCR = 0x0;
+ gpio->pgcon = 0x0;
+ gpio->pgup = 0x0;
+ gpio->opencr = 0x0;
/* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */
gd->bd->bi_arch_number = MACH_TYPE_SMDK2400;
diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c
index 5d1a8bb..76a24bb 100644
--- a/board/samsung/smdk2410/smdk2410.c
+++ b/board/samsung/smdk2410/smdk2410.c
@@ -73,36 +73,36 @@ int board_init (void)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* to reduce PLL lock time, adjust the LOCKTIME register */
- clk_power->LOCKTIME = 0xFFFFFF;
+ clk_power->locktime = 0xFFFFFF;
/* configure MPLL */
- clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+ clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
/* some delay between MPLL and UPLL */
delay (4000);
/* configure UPLL */
- clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+ clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
/* some delay between MPLL and UPLL */
delay (8000);
/* set up the I/O ports */
- gpio->GPACON = 0x007FFFFF;
- gpio->GPBCON = 0x00044555;
- gpio->GPBUP = 0x000007FF;
- gpio->GPCCON = 0xAAAAAAAA;
- gpio->GPCUP = 0x0000FFFF;
- gpio->GPDCON = 0xAAAAAAAA;
- gpio->GPDUP = 0x0000FFFF;
- gpio->GPECON = 0xAAAAAAAA;
- gpio->GPEUP = 0x0000FFFF;
- gpio->GPFCON = 0x000055AA;
- gpio->GPFUP = 0x000000FF;
- gpio->GPGCON = 0xFF95FFBA;
- gpio->GPGUP = 0x0000FFFF;
- gpio->GPHCON = 0x002AFAAA;
- gpio->GPHUP = 0x000007FF;
+ gpio->gpacon = 0x007FFFFF;
+ gpio->gpbcon = 0x00044555;
+ gpio->gpbup = 0x000007FF;
+ gpio->gpccon = 0xAAAAAAAA;
+ gpio->gpcup = 0x0000FFFF;
+ gpio->gpdcon = 0xAAAAAAAA;
+ gpio->gpdup = 0x0000FFFF;
+ gpio->gpecon = 0xAAAAAAAA;
+ gpio->gpeup = 0x0000FFFF;
+ gpio->gpfcon = 0x000055AA;
+ gpio->gpfup = 0x000000FF;
+ gpio->gpgcon = 0xFF95FFBA;
+ gpio->gpgup = 0x0000FFFF;
+ gpio->gphcon = 0x002AFAAA;
+ gpio->gphup = 0x000007FF;
/* arch number of SMDK2410-Board */
gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c
index 3a93677..c82382d 100644
--- a/board/sbc2410x/sbc2410x.c
+++ b/board/sbc2410x/sbc2410x.c
@@ -80,40 +80,40 @@ int board_init (void)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* to reduce PLL lock time, adjust the LOCKTIME register */
- clk_power->LOCKTIME = 0xFFFFFF;
+ clk_power->locktime = 0xFFFFFF;
/* configure MPLL */
- clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+ clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
/* some delay between MPLL and UPLL */
delay (4000);
/* configure UPLL */
- clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+ clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
/* some delay between MPLL and UPLL */
delay (8000);
/* set up the I/O ports */
- gpio->GPACON = 0x007FFFFF;
- gpio->GPBCON = 0x00044556;
- gpio->GPBUP = 0x000007FF;
- gpio->GPCCON = 0xAAAAAAAA;
- gpio->GPCUP = 0x0000FFFF;
- gpio->GPDCON = 0xAAAAAAAA;
- gpio->GPDUP = 0x0000FFFF;
- gpio->GPECON = 0xAAAAAAAA;
- gpio->GPEUP = 0x0000FFFF;
- gpio->GPFCON = 0x000055AA;
- gpio->GPFUP = 0x000000FF;
- gpio->GPGCON = 0xFF95FF3A;
- gpio->GPGUP = 0x0000FFFF;
- gpio->GPHCON = 0x0016FAAA;
- gpio->GPHUP = 0x000007FF;
-
- gpio->EXTINT0=0x22222222;
- gpio->EXTINT1=0x22222222;
- gpio->EXTINT2=0x22222222;
+ gpio->gpacon = 0x007FFFFF;
+ gpio->gpbcon = 0x00044556;
+ gpio->gpbup = 0x000007FF;
+ gpio->gpccon = 0xAAAAAAAA;
+ gpio->gpcup = 0x0000FFFF;
+ gpio->gpdcon = 0xAAAAAAAA;
+ gpio->gpdup = 0x0000FFFF;
+ gpio->gpecon = 0xAAAAAAAA;
+ gpio->gpeup = 0x0000FFFF;
+ gpio->gpfcon = 0x000055AA;
+ gpio->gpfup = 0x000000FF;
+ gpio->gpgcon = 0xFF95FF3A;
+ gpio->gpgup = 0x0000FFFF;
+ gpio->gphcon = 0x0016FAAA;
+ gpio->gphup = 0x000007FF;
+
+ gpio->extint0 = 0x22222222;
+ gpio->extint1 = 0x22222222;
+ gpio->extint2 = 0x22222222;
/* arch number of SMDK2410-Board */
gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index ca4415c..dec3c61 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -637,28 +637,28 @@ static int adc_read (unsigned int channel)
adc_init ();
- padc->ADCCON &= ~ADC_STDBM; /* select normal mode */
- padc->ADCCON &= ~(0x7 << 3); /* clear the channel bits */
- padc->ADCCON |= ((channel << 3) | ADC_ENABLE_START);
+ padc->adccon &= ~ADC_STDBM; /* select normal mode */
+ padc->adccon &= ~(0x7 << 3); /* clear the channel bits */
+ padc->adccon |= ((channel << 3) | ADC_ENABLE_START);
while (j--) {
- if ((padc->ADCCON & ADC_ENABLE_START) == 0)
+ if ((padc->adccon & ADC_ENABLE_START) == 0)
break;
udelay (1);
}
if (j == 0) {
printf("%s: ADC timeout\n", __FUNCTION__);
- padc->ADCCON |= ADC_STDBM; /* select standby mode */
+ padc->adccon |= ADC_STDBM; /* select standby mode */
return -1;
}
- result = padc->ADCDAT & 0x3FF;
+ result = padc->adcdat & 0x3FF;
- padc->ADCCON |= ADC_STDBM; /* select standby mode */
+ padc->adccon |= ADC_STDBM; /* select standby mode */
debug ("%s: channel %d, result[DIGIT]=%d\n", __FUNCTION__,
- (padc->ADCCON >> 3) & 0x7, result);
+ (padc->adccon >> 3) & 0x7, result);
/*
* Wait for ADC to be ready for next conversion. This delay value was
@@ -676,8 +676,8 @@ static void adc_init (void)
padc = s3c2400_get_base_adc();
- padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
- padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
+ padc->adccon &= ~(0xff << 6); /* clear prescaler bits */
+ padc->adccon |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
/*
* Wait some time to avoid problem with very first call of
@@ -699,10 +699,10 @@ static void led_set (unsigned int state)
switch (state) {
case 0: /* turn LED off */
- gpio->PADAT |= (1 << 12);
+ gpio->padat |= (1 << 12);
break;
case 1: /* turn LED on */
- gpio->PADAT &= ~(1 << 12);
+ gpio->padat &= ~(1 << 12);
break;
default:
break;
@@ -729,8 +729,8 @@ static void led_init (void)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure GPA12 as output and set to High -> LED off */
- gpio->PACON &= ~(1 << 12);
- gpio->PADAT |= (1 << 12);
+ gpio->pacon &= ~(1 << 12);
+ gpio->padat |= (1 << 12);
}
diff --git a/board/trab/rs485.c b/board/trab/rs485.c
index 6a3a4cd..30336f2 100644
--- a/board/trab/rs485.c
+++ b/board/trab/rs485.c
@@ -51,16 +51,16 @@ static void rs485_setbrg (void)
reg = (33000000 / (16 * 38400)) - 1;
/* FIFO enable, Tx/Rx FIFO clear */
- uart->UFCON = 0x07;
- uart->UMCON = 0x0;
+ uart->ufcon = 0x07;
+ uart->umcon = 0x0;
/* Normal,No parity,1 stop,8 bit */
- uart->ULCON = 0x3;
+ uart->ulcon = 0x3;
/*
* tx=level,rx=edge,disable timeout int.,enable rx error int.,
* normal,interrupt or polling
*/
- uart->UCON = 0x245;
- uart->UBRDIV = reg;
+ uart->ucon = 0x245;
+ uart->ubrdiv = reg;
for (i = 0; i < 100; i++);
}
@@ -69,16 +69,16 @@ static void rs485_cfgio (void)
{
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
- gpio->PFCON &= ~(0x3 << 2);
- gpio->PFCON |= (0x2 << 2); /* configure GPF1 as RXD1 */
+ gpio->pfcon &= ~(0x3 << 2);
+ gpio->pfcon |= (0x2 << 2); /* configure GPF1 as RXD1 */
- gpio->PFCON &= ~(0x3 << 6);
- gpio->PFCON |= (0x2 << 6); /* configure GPF3 as TXD1 */
+ gpio->pfcon &= ~(0x3 << 6);
+ gpio->pfcon |= (0x2 << 6); /* configure GPF3 as TXD1 */
- gpio->PFUP |= (1 << 1); /* disable pullup on GPF1 */
- gpio->PFUP |= (1 << 3); /* disable pullup on GPF3 */
+ gpio->pfup |= (1 << 1); /* disable pullup on GPF1 */
+ gpio->pfup |= (1 << 3); /* disable pullup on GPF3 */
- gpio->PACON &= ~(1 << 11); /* set GPA11 (RS485_DE) to output */
+ gpio->pacon &= ~(1 << 11); /* set GPA11 (RS485_DE) to output */
}
/*
@@ -104,9 +104,10 @@ int rs485_getc (void)
struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
/* wait for character to arrive */
- while (!(uart->UTRSTAT & 0x1));
+ while (!(uart->utrstat & 0x1))
+ ;
- return uart->URXH & 0xff;
+ return uart->urxh & 0xff;
}
/*
@@ -117,9 +118,10 @@ void rs485_putc (const char c)
struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
/* wait for room in the tx FIFO */
- while (!(uart->UTRSTAT & 0x2));
+ while (!(uart->utrstat & 0x2))
+ ;
- uart->UTXH = c;
+ uart->utxh = c;
/* If \n, also do \r */
if (c == '\n')
@@ -133,7 +135,7 @@ int rs485_tstc (void)
{
struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR);
- return uart->UTRSTAT & 0x1;
+ return uart->utrstat & 0x1;
}
void rs485_puts (const char *s)
@@ -172,9 +174,9 @@ static void set_rs485de(unsigned char rs485de_state)
/* This is on PORT A bit 11 */
if(rs485de_state)
- gpio->PADAT |= (1 << 11);
+ gpio->padat |= (1 << 11);
else
- gpio->PADAT &= ~(1 << 11);
+ gpio->padat &= ~(1 << 11);
}
diff --git a/board/trab/trab.c b/board/trab/trab.c
index 828facd..0f74e8f 100644
--- a/board/trab/trab.c
+++ b/board/trab/trab.c
@@ -77,36 +77,36 @@ int board_init ()
#ifdef CONFIG_TRAB_50MHZ
/* change the clock to be 50 MHz 1:1:1 */
/* MDIV:0x5c PDIV:4 SDIV:2 */
- clk_power->MPLLCON = 0x5c042;
- clk_power->CLKDIVN = 0;
+ clk_power->mpllcon = 0x5c042;
+ clk_power->clkdivn = 0;
#else
/* change the clock to be 133 MHz 1:2:4 */
/* MDIV:0x7d PDIV:4 SDIV:1 */
- clk_power->MPLLCON = 0x7d041;
- clk_power->CLKDIVN = 3;
+ clk_power->mpllcon = 0x7d041;
+ clk_power->clkdivn = 3;
#endif
/* set up the I/O ports */
- gpio->PACON = 0x3ffff;
- gpio->PBCON = 0xaaaaaaaa;
- gpio->PBUP = 0xffff;
+ gpio->pacon = 0x3ffff;
+ gpio->pbcon = 0xaaaaaaaa;
+ gpio->pbup = 0xffff;
/* INPUT nCTS0 nRTS0 TXD[1] TXD[0] RXD[1] RXD[0] */
/* 00, 10, 10, 10, 10, 10, 10 */
- gpio->PFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10);
+ gpio->pfcon = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10);
#ifdef CONFIG_HWFLOW
/* do not pull up RXD0, RXD1, TXD0, TXD1, CTS0, RTS0 */
- gpio->PFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5);
+ gpio->pfup = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5);
#else
/* do not pull up RXD0, RXD1, TXD0, TXD1 */
- gpio->PFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3);
+ gpio->pfup = (1<<0) | (1<<1) | (1<<2) | (1<<3);
#endif
- gpio->PGCON = 0x0;
- gpio->PGUP = 0x0;
- gpio->OPENCR= 0x0;
+ gpio->pgcon = 0x0;
+ gpio->pgup = 0x0;
+ gpio->opencr = 0x0;
/* suppress flicker of the VFDs */
- gpio->MISCCR = 0x40;
- gpio->PFCON |= (2<<12);
+ gpio->misccr = 0x40;
+ gpio->pfcon |= (2<<12);
gd->bd->bi_arch_number = MACH_TYPE_TRAB;
@@ -114,8 +114,8 @@ int board_init ()
gd->bd->bi_boot_params = 0x0c000100;
/* Make sure both buzzers are turned off */
- gpio->PDCON |= 0x5400;
- gpio->PDDAT &= ~0xE0;
+ gpio->pdcon |= 0x5400;
+ gpio->pddat &= ~0xE0;
#ifdef CONFIG_VFD
vfd_init_clocks();
@@ -132,7 +132,7 @@ int board_init ()
#ifdef CONFIG_DRIVER_S3C24X0_I2C
/* Configure I/O ports PG5 und PG6 for I2C */
- gpio->PGCON = (gpio->PGCON & 0x003c00) | 0x003c00;
+ gpio->pgcon = (gpio->pgcon & 0x003c00) | 0x003c00;
#endif /* CONFIG_DRIVER_S3C24X0_I2C */
return 0;
@@ -341,14 +341,14 @@ static inline void SET_CS_TOUCH(void)
{
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
- gpio->PDDAT &= 0x5FF;
+ gpio->pddat &= 0x5FF;
}
static inline void CLR_CS_TOUCH(void)
{
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
- gpio->PDDAT |= 0x200;
+ gpio->pddat |= 0x200;
}
static void spi_init(void)
@@ -358,20 +358,20 @@ static void spi_init(void)
int i;
/* Configure I/O ports. */
- gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000;
- gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000;
- gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000;
- gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000;
+ gpio->pdcon = (gpio->pdcon & 0xF3FFFF) | 0x040000;
+ gpio->pgcon = (gpio->pgcon & 0x0F3FFF) | 0x008000;
+ gpio->pgcon = (gpio->pgcon & 0x0CFFFF) | 0x020000;
+ gpio->pgcon = (gpio->pgcon & 0x03FFFF) | 0x080000;
CLR_CS_TOUCH();
- spi->ch[0].SPPRE = 0x1F; /* Baudrate ca. 514kHz */
- spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */
- spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */
+ spi->ch[0].sppre = 0x1F; /* Baudrate ca. 514kHz */
+ spi->ch[0].sppin = 0x01; /* SPI-MOSI holds Level after last bit */
+ spi->ch[0].spcon = 0x1A; /* Polling, Prescale, Master, CPOL=0, CPHA=1 */
/* Dummy byte ensures clock to be low. */
for (i = 0; i < 10; i++) {
- spi->ch[0].SPTDAT = 0xFF;
+ spi->ch[0].sptdat = 0xFF;
}
wait_transmit_done();
}
@@ -380,7 +380,8 @@ static void wait_transmit_done(void)
{
struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
- while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
+ while (!(spi->ch[0].spsta & 0x01)) /* wait until transfer is done */
+ ;
}
static void tsc2000_write(unsigned int page, unsigned int reg,
@@ -394,13 +395,13 @@ static void tsc2000_write(unsigned int page, unsigned int reg,
command |= (page << 11);
command |= (reg << 5);
- spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
+ spi->ch[0].sptdat = (command & 0xFF00) >> 8;
wait_transmit_done();
- spi->ch[0].SPTDAT = (command & 0x00FF);
+ spi->ch[0].sptdat = (command & 0x00FF);
wait_transmit_done();
- spi->ch[0].SPTDAT = (data & 0xFF00) >> 8;
+ spi->ch[0].sptdat = (data & 0xFF00) >> 8;
wait_transmit_done();
- spi->ch[0].SPTDAT = (data & 0x00FF);
+ spi->ch[0].sptdat = (data & 0x00FF);
wait_transmit_done();
CLR_CS_TOUCH();
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 268162e..fe3dab3 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -411,28 +411,28 @@ static int adc_read (unsigned int channel)
padc = s3c2400_get_base_adc();
channel &= 0x7;
- padc->ADCCON &= ~ADC_STDBM; /* select normal mode */
- padc->ADCCON &= ~(0x7 << 3); /* clear the channel bits */
- padc->ADCCON |= ((channel << 3) | ADC_ENABLE_START);
+ padc->adccon &= ~ADC_STDBM; /* select normal mode */
+ padc->adccon &= ~(0x7 << 3); /* clear the channel bits */
+ padc->adccon |= ((channel << 3) | ADC_ENABLE_START);
while (j--) {
- if ((padc->ADCCON & ADC_ENABLE_START) == 0)
+ if ((padc->adccon & ADC_ENABLE_START) == 0)
break;
udelay (1);
}
if (j == 0) {
printf("%s: ADC timeout\n", __FUNCTION__);
- padc->ADCCON |= ADC_STDBM; /* select standby mode */
+ padc->adccon |= ADC_STDBM; /* select standby mode */
return -1;
}
- result = padc->ADCDAT & 0x3FF;
+ result = padc->adcdat & 0x3FF;
- padc->ADCCON |= ADC_STDBM; /* select standby mode */
+ padc->adccon |= ADC_STDBM; /* select standby mode */
debug ("%s: channel %d, result[DIGIT]=%d\n", __FUNCTION__,
- (padc->ADCCON >> 3) & 0x7, result);
+ (padc->adccon >> 3) & 0x7, result);
/*
* Wait for ADC to be ready for next conversion. This delay value was
@@ -450,8 +450,8 @@ static void adc_init (void)
padc = s3c2400_get_base_adc();
- padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
- padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
+ padc->adccon &= ~(0xff << 6); /* clear prescaler bits */
+ padc->adccon |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
/*
* Wait some time to avoid problem with very first call of
@@ -493,10 +493,10 @@ int do_power_switch (void)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure GPE7 as input */
- gpio->PECON &= ~(0x3 << (2 * 7));
+ gpio->pecon &= ~(0x3 << (2 * 7));
/* signal GPE7 from power switch is low active: 0=on , 1=off */
- result = ((gpio->PEDAT & (1 << 7)) == (1 << 7)) ? 0 : 1;
+ result = ((gpio->pedat & (1 << 7)) == (1 << 7)) ? 0 : 1;
print_identifier ();
printf("%d\n", result);
@@ -561,17 +561,17 @@ int do_vfd_id (void)
/* try to red vfd board id from the value defined by pull-ups */
- pcup_old = gpio->PCUP;
- pccon_old = gpio->PCCON;
+ pcup_old = gpio->pcup;
+ pccon_old = gpio->pccon;
- gpio->PCUP = (gpio->PCUP & 0xFFF0); /* activate GPC0...GPC3 pull-ups */
- gpio->PCCON = (gpio->PCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as
+ gpio->pcup = (gpio->pcup & 0xFFF0); /* activate GPC0...GPC3 pull-ups */
+ gpio->pccon = (gpio->pccon & 0xFFFFFF00); /* configure GPC0...GPC3 as
* inputs */
udelay (10); /* allow signals to settle */
- vfd_board_id = (~gpio->PCDAT) & 0x000F; /* read GPC0...GPC3 port pins */
+ vfd_board_id = (~gpio->pcdat) & 0x000F; /* read GPC0...GPC3 port pins */
- gpio->PCCON = pccon_old;
- gpio->PCUP = pcup_old;
+ gpio->pccon = pccon_old;
+ gpio->pcup = pcup_old;
/* print vfd_board_id to console */
print_identifier ();
@@ -593,40 +593,40 @@ int do_buzzer (char * const *argv)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* set prescaler for timer 2, 3 and 4 */
- timers->TCFG0 &= ~0xFF00;
- timers->TCFG0 |= 0x0F00;
+ timers->tcfg0 &= ~0xFF00;
+ timers->tcfg0 |= 0x0F00;
/* set divider for timer 2 */
- timers->TCFG1 &= ~0xF00;
- timers->TCFG1 |= 0x300;
+ timers->tcfg1 &= ~0xF00;
+ timers->tcfg1 |= 0x300;
/* set frequency */
counter = (PCLK / BUZZER_FREQ) >> 9;
- timers->ch[2].TCNTB = counter;
- timers->ch[2].TCMPB = counter / 2;
+ timers->ch[2].tcntb = counter;
+ timers->ch[2].tcmpb = counter / 2;
if (strcmp (argv[2], "on") == 0) {
debug ("%s: frequency: %d\n", __FUNCTION__,
BUZZER_FREQ);
/* configure pin GPD7 as TOUT2 */
- gpio->PDCON &= ~0xC000;
- gpio->PDCON |= 0x8000;
+ gpio->pdcon &= ~0xC000;
+ gpio->pdcon |= 0x8000;
/* start */
- timers->TCON = (timers->TCON | UPDATE2 | RELOAD2) &
+ timers->tcon = (timers->tcon | UPDATE2 | RELOAD2) &
~INVERT2;
- timers->TCON = (timers->TCON | START2) & ~UPDATE2;
+ timers->tcon = (timers->tcon | START2) & ~UPDATE2;
return (0);
}
else if (strcmp (argv[2], "off") == 0) {
/* stop */
- timers->TCON &= ~(START2 | RELOAD2);
+ timers->tcon &= ~(START2 | RELOAD2);
/* configure GPD7 as output and set to low */
- gpio->PDCON &= ~0xC000;
- gpio->PDCON |= 0x4000;
- gpio->PDDAT &= ~0x80;
+ gpio->pdcon &= ~0xC000;
+ gpio->pdcon |= 0x4000;
+ gpio->pddat &= ~0x80;
return (0);
}
@@ -640,12 +640,12 @@ int do_led (char * const *argv)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure PC14 and PC15 as output */
- gpio->PCCON &= ~(0xF << 28);
- gpio->PCCON |= (0x5 << 28);
+ gpio->pccon &= ~(0xF << 28);
+ gpio->pccon |= (0x5 << 28);
/* configure PD0 and PD4 as output */
- gpio->PDCON &= ~((0x3 << 8) | 0x3);
- gpio->PDCON |= ((0x1 << 8) | 0x1);
+ gpio->pdcon &= ~((0x3 << 8) | 0x3);
+ gpio->pdcon |= ((0x1 << 8) | 0x1);
switch (simple_strtoul(argv[2], NULL, 10)) {
@@ -655,30 +655,30 @@ int do_led (char * const *argv)
case 2:
if (strcmp (argv[3], "on") == 0)
- gpio->PCDAT |= (1 << 14);
+ gpio->pcdat |= (1 << 14);
else
- gpio->PCDAT &= ~(1 << 14);
+ gpio->pcdat &= ~(1 << 14);
return 0;
case 3:
if (strcmp (argv[3], "on") == 0)
- gpio->PCDAT |= (1 << 15);
+ gpio->pcdat |= (1 << 15);
else
- gpio->PCDAT &= ~(1 << 15);
+ gpio->pcdat &= ~(1 << 15);
return 0;
case 4:
if (strcmp (argv[3], "on") == 0)
- gpio->PDDAT |= (1 << 0);
+ gpio->pddat |= (1 << 0);
else
- gpio->PDDAT &= ~(1 << 0);
+ gpio->pddat &= ~(1 << 0);
return 0;
case 5:
if (strcmp (argv[3], "on") == 0)
- gpio->PDDAT |= (1 << 4);
+ gpio->pddat |= (1 << 4);
else
- gpio->PDDAT &= ~(1 << 4);
+ gpio->pddat &= ~(1 << 4);
return 0;
default:
@@ -695,22 +695,22 @@ int do_full_bridge (char * const *argv)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure PD5 and PD6 as output */
- gpio->PDCON &= ~((0x3 << 5*2) | (0x3 << 6*2));
- gpio->PDCON |= ((0x1 << 5*2) | (0x1 << 6*2));
+ gpio->pdcon &= ~((0x3 << 5*2) | (0x3 << 6*2));
+ gpio->pdcon |= ((0x1 << 5*2) | (0x1 << 6*2));
if (strcmp (argv[2], "+") == 0) {
- gpio->PDDAT |= (1 << 5);
- gpio->PDDAT |= (1 << 6);
+ gpio->pddat |= (1 << 5);
+ gpio->pddat |= (1 << 6);
return 0;
}
else if (strcmp (argv[2], "-") == 0) {
- gpio->PDDAT &= ~(1 << 5);
- gpio->PDDAT |= (1 << 6);
+ gpio->pddat &= ~(1 << 5);
+ gpio->pddat |= (1 << 6);
return 0;
}
else if (strcmp (argv[2], "off") == 0) {
- gpio->PDDAT &= ~(1 << 5);
- gpio->PDDAT &= ~(1 << 6);
+ gpio->pddat &= ~(1 << 5);
+ gpio->pddat &= ~(1 << 6);
return 0;
}
printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);
@@ -804,15 +804,15 @@ int do_motor (char * const *argv)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* Configure I/O port */
- gpio->PGCON &= ~(0x3 << 0);
- gpio->PGCON |= (0x1 << 0);
+ gpio->pgcon &= ~(0x3 << 0);
+ gpio->pgcon |= (0x1 << 0);
if (strcmp (argv[2], "on") == 0) {
- gpio->PGDAT &= ~(1 << 0);
+ gpio->pgdat &= ~(1 << 0);
return 0;
}
if (strcmp (argv[2], "off") == 0) {
- gpio->PGDAT |= (1 << 0);
+ gpio->pgdat |= (1 << 0);
return 0;
}
printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);
@@ -832,36 +832,36 @@ int do_pwm (char * const *argv)
if (strcmp (argv[2], "on") == 0) {
/* configure pin GPD8 as TOUT3 */
- gpio->PDCON &= ~(0x3 << 8*2);
- gpio->PDCON |= (0x2 << 8*2);
+ gpio->pdcon &= ~(0x3 << 8*2);
+ gpio->pdcon |= (0x2 << 8*2);
/* set prescaler for timer 2, 3 and 4 */
- timers->TCFG0 &= ~0xFF00;
- timers->TCFG0 |= 0x0F00;
+ timers->tcfg0 &= ~0xFF00;
+ timers->tcfg0 |= 0x0F00;
/* set divider for timer 3 */
- timers->TCFG1 &= ~(0xf << 12);
- timers->TCFG1 |= (0x3 << 12);
+ timers->tcfg1 &= ~(0xf << 12);
+ timers->tcfg1 |= (0x3 << 12);
/* set frequency */
counter = (PCLK / PWM_FREQ) >> 9;
- timers->ch[3].TCNTB = counter;
- timers->ch[3].TCMPB = counter / 2;
+ timers->ch[3].tcntb = counter;
+ timers->ch[3].tcmpb = counter / 2;
/* start timer */
- timers->TCON = (timers->TCON | UPDATE3 | RELOAD3) & ~INVERT3;
- timers->TCON = (timers->TCON | START3) & ~UPDATE3;
+ timers->tcon = (timers->tcon | UPDATE3 | RELOAD3) & ~INVERT3;
+ timers->tcon = (timers->tcon | START3) & ~UPDATE3;
return 0;
}
if (strcmp (argv[2], "off") == 0) {
/* stop timer */
- timers->TCON &= ~(START2 | RELOAD2);
+ timers->tcon &= ~(START2 | RELOAD2);
/* configure pin GPD8 as output and set to 0 */
- gpio->PDCON &= ~(0x3 << 8*2);
- gpio->PDCON |= (0x1 << 8*2);
- gpio->PDDAT &= ~(1 << 8);
+ gpio->pdcon &= ~(0x3 << 8*2);
+ gpio->pdcon |= (0x1 << 8*2);
+ gpio->pddat &= ~(1 << 8);
return 0;
}
printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);
diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c
index 5890624..426ed9c 100644
--- a/board/trab/tsc2000.c
+++ b/board/trab/tsc2000.c
@@ -50,21 +50,21 @@ void tsc2000_spi_init(void)
int i;
/* Configure I/O ports. */
- gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000;
- gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000;
- gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000;
- gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000;
+ gpio->pdcon = (gpio->pdcon & 0xF3FFFF) | 0x040000;
+ gpio->pgcon = (gpio->pgcon & 0x0F3FFF) | 0x008000;
+ gpio->pgcon = (gpio->pgcon & 0x0CFFFF) | 0x020000;
+ gpio->pgcon = (gpio->pgcon & 0x03FFFF) | 0x080000;
CLR_CS_TOUCH();
- spi->ch[0].SPPRE = 0x1F; /* Baud-rate ca. 514kHz */
- spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */
- spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0,
+ spi->ch[0].sppre = 0x1F; /* Baud-rate ca. 514kHz */
+ spi->ch[0].sppin = 0x01; /* SPI-MOSI holds Level after last bit */
+ spi->ch[0].spcon = 0x1A; /* Polling, Prescaler, Master, CPOL=0,
CPHA=1 */
/* Dummy byte ensures clock to be low. */
for (i = 0; i < 10; i++) {
- spi->ch[0].SPTDAT = 0xFF;
+ spi->ch[0].sptdat = 0xFF;
}
spi_wait_transmit_done();
}
@@ -74,7 +74,8 @@ void spi_wait_transmit_done(void)
{
struct s3c24x0_spi * const spi = s3c24x0_get_base_spi();
- while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */
+ while (!(spi->ch[0].spsta & 0x01)) /* wait until transfer is done */
+ ;
}
@@ -85,13 +86,13 @@ void tsc2000_write(unsigned short reg, unsigned short data)
SET_CS_TOUCH();
command = reg;
- spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
+ spi->ch[0].sptdat = (command & 0xFF00) >> 8;
spi_wait_transmit_done();
- spi->ch[0].SPTDAT = (command & 0x00FF);
+ spi->ch[0].sptdat = (command & 0x00FF);
spi_wait_transmit_done();
- spi->ch[0].SPTDAT = (data & 0xFF00) >> 8;
+ spi->ch[0].sptdat = (data & 0xFF00) >> 8;
spi_wait_transmit_done();
- spi->ch[0].SPTDAT = (data & 0x00FF);
+ spi->ch[0].sptdat = (data & 0x00FF);
spi_wait_transmit_done();
CLR_CS_TOUCH();
@@ -106,19 +107,19 @@ unsigned short tsc2000_read (unsigned short reg)
SET_CS_TOUCH();
command = 0x8000 | reg;
- spi->ch[0].SPTDAT = (command & 0xFF00) >> 8;
+ spi->ch[0].sptdat = (command & 0xFF00) >> 8;
spi_wait_transmit_done();
- spi->ch[0].SPTDAT = (command & 0x00FF);
+ spi->ch[0].sptdat = (command & 0x00FF);
spi_wait_transmit_done();
- spi->ch[0].SPTDAT = 0xFF;
+ spi->ch[0].sptdat = 0xFF;
spi_wait_transmit_done();
- data = spi->ch[0].SPRDAT;
- spi->ch[0].SPTDAT = 0xFF;
+ data = spi->ch[0].sprdat;
+ spi->ch[0].sptdat = 0xFF;
spi_wait_transmit_done();
CLR_CS_TOUCH();
- return (spi->ch[0].SPRDAT & 0x0FF) | (data << 8);
+ return (spi->ch[0].sprdat & 0x0FF) | (data << 8);
}
diff --git a/board/trab/tsc2000.h b/board/trab/tsc2000.h
index 0b6253f..f3cecb9 100644
--- a/board/trab/tsc2000.h
+++ b/board/trab/tsc2000.h
@@ -29,45 +29,49 @@
#define _TSC2000_H_
/* temperature channel multiplexer definitions */
-#define CON_MUX0 (gpio->PCCON = (gpio->PCCON & 0x0FFFFFCFF) | 0x00000100)
-#define CLR_MUX0 (gpio->PCDAT &= 0x0FFEF)
-#define SET_MUX0 (gpio->PCDAT |= 0x00010)
-
-#define CON_MUX1 (gpio->PCCON = (gpio->PCCON & 0x0FFFFF3FF) | 0x00000400)
-#define CLR_MUX1 (gpio->PCDAT &= 0x0FFDF)
-#define SET_MUX1 (gpio->PCDAT |= 0x00020)
-
-#define CON_MUX1_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFFCFFF) | 0x00001000)
-#define CLR_MUX1_ENABLE (gpio->PCDAT |= 0x00040)
-#define SET_MUX1_ENABLE (gpio->PCDAT &= 0x0FFBF)
-
-#define CON_MUX2_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFF3FFF) | 0x00004000)
-#define CLR_MUX2_ENABLE (gpio->PCDAT |= 0x00080)
-#define SET_MUX2_ENABLE (gpio->PCDAT &= 0x0FF7F)
-
-#define CON_MUX3_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFFCFFFF) | 0x00010000)
-#define CLR_MUX3_ENABLE (gpio->PCDAT |= 0x00100)
-#define SET_MUX3_ENABLE (gpio->PCDAT &= 0x0FEFF)
-
-#define CON_MUX4_ENABLE (gpio->PCCON = (gpio->PCCON & 0x0FFF3FFFF) | 0x00040000)
-#define CLR_MUX4_ENABLE (gpio->PCDAT |= 0x00200)
-#define SET_MUX4_ENABLE (gpio->PCDAT &= 0x0FDFF)
-
-#define CON_SEL_TEMP_V_0 (gpio->PCCON = (gpio->PCCON & 0x0FFCFFFFF) | 0x00100000)
-#define CLR_SEL_TEMP_V_0 (gpio->PCDAT &= 0x0FBFF)
-#define SET_SEL_TEMP_V_0 (gpio->PCDAT |= 0x00400)
-
-#define CON_SEL_TEMP_V_1 (gpio->PCCON = (gpio->PCCON & 0x0FF3FFFFF) | 0x00400000)
-#define CLR_SEL_TEMP_V_1 (gpio->PCDAT &= 0x0F7FF)
-#define SET_SEL_TEMP_V_1 (gpio->PCDAT |= 0x00800)
-
-#define CON_SEL_TEMP_V_2 (gpio->PCCON = (gpio->PCCON & 0x0FCFFFFFF) | 0x01000000)
-#define CLR_SEL_TEMP_V_2 (gpio->PCDAT &= 0x0EFFF)
-#define SET_SEL_TEMP_V_2 (gpio->PCDAT |= 0x01000)
-
-#define CON_SEL_TEMP_V_3 (gpio->PCCON = (gpio->PCCON & 0x0F3FFFFFF) | 0x04000000)
-#define CLR_SEL_TEMP_V_3 (gpio->PCDAT &= 0x0DFFF)
-#define SET_SEL_TEMP_V_3 (gpio->PCDAT |= 0x02000)
+#define CON_MUX0 (gpio->pccon = (gpio->pccon & 0x0FFFFFCFF) | 0x00000100)
+#define CLR_MUX0 (gpio->pcdat &= 0x0FFEF)
+#define SET_MUX0 (gpio->pcdat |= 0x00010)
+
+#define CON_MUX1 (gpio->pccon = (gpio->pccon & 0x0FFFFF3FF) | 0x00000400)
+#define CLR_MUX1 (gpio->pcdat &= 0x0FFDF)
+#define SET_MUX1 (gpio->pcdat |= 0x00020)
+
+#define CON_MUX1_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFFFCFFF) | 0x00001000)
+#define CLR_MUX1_ENABLE (gpio->pcdat |= 0x00040)
+#define SET_MUX1_ENABLE (gpio->pcdat &= 0x0FFBF)
+
+#define CON_MUX2_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFFF3FFF) | 0x00004000)
+#define CLR_MUX2_ENABLE (gpio->pcdat |= 0x00080)
+#define SET_MUX2_ENABLE (gpio->pcdat &= 0x0FF7F)
+
+#define CON_MUX3_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFFCFFFF) | 0x00010000)
+#define CLR_MUX3_ENABLE (gpio->pcdat |= 0x00100)
+#define SET_MUX3_ENABLE (gpio->pcdat &= 0x0FEFF)
+
+#define CON_MUX4_ENABLE (gpio->pccon = (gpio->pccon & 0x0FFF3FFFF) | 0x00040000)
+#define CLR_MUX4_ENABLE (gpio->pcdat |= 0x00200)
+#define SET_MUX4_ENABLE (gpio->pcdat &= 0x0FDFF)
+
+#define CON_SEL_TEMP_V_0 (gpio->pccon = (gpio->pccon & 0x0FFCFFFFF) | \
+ 0x00100000)
+#define CLR_SEL_TEMP_V_0 (gpio->pcdat &= 0x0FBFF)
+#define SET_SEL_TEMP_V_0 (gpio->pcdat |= 0x00400)
+
+#define CON_SEL_TEMP_V_1 (gpio->pccon = (gpio->pccon & 0x0FF3FFFFF) | \
+ 0x00400000)
+#define CLR_SEL_TEMP_V_1 (gpio->pcdat &= 0x0F7FF)
+#define SET_SEL_TEMP_V_1 (gpio->pcdat |= 0x00800)
+
+#define CON_SEL_TEMP_V_2 (gpio->pccon = (gpio->pccon & 0x0FCFFFFFF) | \
+ 0x01000000)
+#define CLR_SEL_TEMP_V_2 (gpio->pcdat &= 0x0EFFF)
+#define SET_SEL_TEMP_V_2 (gpio->pcdat |= 0x01000)
+
+#define CON_SEL_TEMP_V_3 (gpio->pccon = (gpio->pccon & 0x0F3FFFFFF) | \
+ 0x04000000)
+#define CLR_SEL_TEMP_V_3 (gpio->pcdat &= 0x0DFFF)
+#define SET_SEL_TEMP_V_3 (gpio->pcdat |= 0x02000)
/* TSC2000 register definition */
#define TSC2000_REG_X ((0 << 11) | (0 << 5))
@@ -130,7 +134,7 @@ static inline void SET_CS_TOUCH(void)
{
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
- gpio->PDDAT &= 0x5FF;
+ gpio->pddat &= 0x5FF;
}
@@ -138,7 +142,7 @@ static inline void CLR_CS_TOUCH(void)
{
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
- gpio->PDDAT |= 0x200;
+ gpio->pddat |= 0x200;
}
#endif /* _TSC2000_H_ */
diff --git a/board/trab/vfd.c b/board/trab/vfd.c
index b7eb8cc..9a2b1ba 100644
--- a/board/trab/vfd.c
+++ b/board/trab/vfd.c
@@ -365,12 +365,12 @@ int vfd_init_clocks (void)
/* try to determine display type from the value
* defined by pull-ups
*/
- gpio->PCUP = (gpio->PCUP & 0xFFF0); /* activate GPC0...GPC3 pullups */
- gpio->PCCON = (gpio->PCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as inputs */
+ gpio->pcup = (gpio->pcup & 0xFFF0); /* activate GPC0...GPC3 pullups */
+ gpio->pccon = (gpio->pccon & 0xFFFFFF00); /* cfg GPC0...GPC3 inputs */
/* allow signals to settle */
for (i=0; i<10000; i++) /* udelay isn't working yet at this point! */
__asm__("NOP");
- vfd_board_id = (~gpio->PCDAT) & 0x000F; /* read GPC0...GPC3 port pins */
+ vfd_board_id = (~gpio->pcdat) & 0x000F; /* read GPC0...GPC3 port pins */
VFD_DISABLE; /* activate blank for the vfd */
@@ -381,39 +381,39 @@ int vfd_init_clocks (void)
/* If new board revision, then use PWM 3 as cpld-clock */
/* Enable 500 Hz timer for fill level sensor to operate properly */
/* Configure TOUT3 as functional pin, disable pull-up */
- gpio->PDCON &= ~0x30000;
- gpio->PDCON |= 0x20000;
- gpio->PDUP |= (1 << 8);
+ gpio->pdcon &= ~0x30000;
+ gpio->pdcon |= 0x20000;
+ gpio->pdup |= (1 << 8);
/* Configure the prescaler */
- timers->TCFG0 &= ~0xff00;
- timers->TCFG0 |= 0x0f00;
+ timers->tcfg0 &= ~0xff00;
+ timers->tcfg0 |= 0x0f00;
/* Select MUX input (divider) for timer3 (1/16) */
- timers->TCFG1 &= ~0xf000;
- timers->TCFG1 |= 0x3000;
+ timers->tcfg1 &= ~0xf000;
+ timers->tcfg1 |= 0x3000;
/* Enable autoreload and set the counter and compare
* registers to values for the 500 Hz clock
* (for a given prescaler (15) and divider (16)):
* counter = (66000000 / 500) >> 9;
*/
- timers->ch[3].TCNTB = 0x101;
- timers->ch[3].TCMPB = 0x101 / 2;
+ timers->ch[3].tcntb = 0x101;
+ timers->ch[3].tcmpb = 0x101 / 2;
/* Start timer */
- timers->TCON = (timers->TCON | UPDATE3 | RELOAD3) & ~INVERT3;
- timers->TCON = (timers->TCON | START3) & ~UPDATE3;
+ timers->tcon = (timers->tcon | UPDATE3 | RELOAD3) & ~INVERT3;
+ timers->tcon = (timers->tcon | START3) & ~UPDATE3;
}
#endif
/* If old board revision, then use vm-signal as cpld-clock */
- lcd->LCDCON2 = 0x00FFC000;
- lcd->LCDCON3 = 0x0007FF00;
- lcd->LCDCON4 = 0x00000000;
- lcd->LCDCON5 = 0x00000400;
- lcd->LCDCON1 = 0x00000B75;
+ lcd->lcdcon2 = 0x00FFC000;
+ lcd->lcdcon3 = 0x0007FF00;
+ lcd->lcdcon4 = 0x00000000;
+ lcd->lcdcon5 = 0x00000400;
+ lcd->lcdcon1 = 0x00000B75;
/* VM (GPD1) is used as clock for the CPLD */
- gpio->PDCON = (gpio->PDCON & 0xFFFFFFF3) | 0x00000008;
+ gpio->pdcon = (gpio->pdcon & 0xFFFFFFF3) | 0x00000008;
return 0;
}
@@ -485,40 +485,44 @@ int drv_vfd_init(void)
* see manual S3C2400
*/
/* Stopp LCD-Controller */
- lcd->LCDCON1 = 0x00000000;
+ lcd->lcdcon1 = 0x00000000;
/* frame buffer startadr */
- lcd->LCDSADDR1 = gd->fb_base >> 1;
+ lcd->lcdsaddr1 = gd->fb_base >> 1;
/* frame buffer endadr */
- lcd->LCDSADDR2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1;
- lcd->LCDSADDR3 = ((256/4));
- lcd->LCDCON2 = 0x000DC000;
+ lcd->lcdsaddr2 = (gd->fb_base + FRAME_BUF_SIZE) >> 1;
+ lcd->lcdsaddr3 = ((256/4));
+ lcd->lcdcon2 = 0x000DC000;
if(gd->vfd_type == VFD_TYPE_MN11236)
- lcd->LCDCON2 = 37 << 14; /* MN11236: 38 lines */
+ lcd->lcdcon2 = 37 << 14; /* MN11236: 38 lines */
else
- lcd->LCDCON2 = 55 << 14; /* T119C: 56 lines */
- lcd->LCDCON3 = 0x0051000A;
- lcd->LCDCON4 = 0x00000001;
+ lcd->lcdcon2 = 55 << 14; /* T119C: 56 lines */
+ lcd->lcdcon3 = 0x0051000A;
+ lcd->lcdcon4 = 0x00000001;
if (gd->vfd_type && vfd_inv_data)
- lcd->LCDCON5 = 0x000004C0;
+ lcd->lcdcon5 = 0x000004C0;
else
- lcd->LCDCON5 = 0x00000440;
+ lcd->lcdcon5 = 0x00000440;
/* Port pins as LCD output */
- gpio->PCCON = (gpio->PCCON & 0xFFFFFF00)| 0x000000AA;
- gpio->PDCON = (gpio->PDCON & 0xFFFFFF03)| 0x000000A8;
+ gpio->pccon = (gpio->pccon & 0xFFFFFF00) | 0x000000AA;
+ gpio->pdcon = (gpio->pdcon & 0xFFFFFF03) | 0x000000A8;
/* Synchronize VFD enable with LCD controller to avoid flicker */
- lcd->LCDCON1 = 0x00000B75; /* Start LCD-Controller */
- while((lcd->LCDCON5 & 0x180000)!=0x100000); /* Wait for end of VSYNC */
- while((lcd->LCDCON5 & 0x060000)!=0x040000); /* Wait for next HSYNC */
- while((lcd->LCDCON5 & 0x060000)==0x040000);
- while((lcd->LCDCON5 & 0x060000)!=0x000000);
+ lcd->lcdcon1 = 0x00000B75; /* Start LCD-Controller */
+ while ((lcd->lcdcon5 & 0x180000) != 0x100000) /* Wait for VSYNC end */
+ ;
+ while ((lcd->lcdcon5 & 0x060000) != 0x040000) /* Wait for next HSYNC */
+ ;
+ while ((lcd->lcdcon5 & 0x060000) == 0x040000)
+ ;
+ while ((lcd->lcdcon5 & 0x060000) != 0x000000)
+ ;
if(gd->vfd_type)
VFD_ENABLE;
- debug ("LCDSADDR1: %lX\n", lcd->LCDSADDR1);
- debug ("LCDSADDR2: %lX\n", lcd->LCDSADDR2);
- debug ("LCDSADDR3: %lX\n", lcd->LCDSADDR3);
+ debug("LCDSADDR1: %lX\n", lcd->lcdsaddr1);
+ debug("LCDSADDR2: %lX\n", lcd->lcdsaddr2);
+ debug("LCDSADDR3: %lX\n", lcd->lcdsaddr3);
return 0;
}
@@ -532,8 +536,8 @@ void disable_vfd (void)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
VFD_DISABLE;
- gpio->PDCON &= ~0xC;
- gpio->PDUP &= ~0x2;
+ gpio->pdcon &= ~0xC;
+ gpio->pdup &= ~0x2;
}
/************************************************************************/