summaryrefslogtreecommitdiff
path: root/board/trab/trab_fkt.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/trab/trab_fkt.c')
-rw-r--r--board/trab/trab_fkt.c142
1 files changed, 71 insertions, 71 deletions
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 268162e..fe3dab3 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -411,28 +411,28 @@ static int adc_read (unsigned int channel)
padc = s3c2400_get_base_adc();
channel &= 0x7;
- padc->ADCCON &= ~ADC_STDBM; /* select normal mode */
- padc->ADCCON &= ~(0x7 << 3); /* clear the channel bits */
- padc->ADCCON |= ((channel << 3) | ADC_ENABLE_START);
+ padc->adccon &= ~ADC_STDBM; /* select normal mode */
+ padc->adccon &= ~(0x7 << 3); /* clear the channel bits */
+ padc->adccon |= ((channel << 3) | ADC_ENABLE_START);
while (j--) {
- if ((padc->ADCCON & ADC_ENABLE_START) == 0)
+ if ((padc->adccon & ADC_ENABLE_START) == 0)
break;
udelay (1);
}
if (j == 0) {
printf("%s: ADC timeout\n", __FUNCTION__);
- padc->ADCCON |= ADC_STDBM; /* select standby mode */
+ padc->adccon |= ADC_STDBM; /* select standby mode */
return -1;
}
- result = padc->ADCDAT & 0x3FF;
+ result = padc->adcdat & 0x3FF;
- padc->ADCCON |= ADC_STDBM; /* select standby mode */
+ padc->adccon |= ADC_STDBM; /* select standby mode */
debug ("%s: channel %d, result[DIGIT]=%d\n", __FUNCTION__,
- (padc->ADCCON >> 3) & 0x7, result);
+ (padc->adccon >> 3) & 0x7, result);
/*
* Wait for ADC to be ready for next conversion. This delay value was
@@ -450,8 +450,8 @@ static void adc_init (void)
padc = s3c2400_get_base_adc();
- padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */
- padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
+ padc->adccon &= ~(0xff << 6); /* clear prescaler bits */
+ padc->adccon |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */
/*
* Wait some time to avoid problem with very first call of
@@ -493,10 +493,10 @@ int do_power_switch (void)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure GPE7 as input */
- gpio->PECON &= ~(0x3 << (2 * 7));
+ gpio->pecon &= ~(0x3 << (2 * 7));
/* signal GPE7 from power switch is low active: 0=on , 1=off */
- result = ((gpio->PEDAT & (1 << 7)) == (1 << 7)) ? 0 : 1;
+ result = ((gpio->pedat & (1 << 7)) == (1 << 7)) ? 0 : 1;
print_identifier ();
printf("%d\n", result);
@@ -561,17 +561,17 @@ int do_vfd_id (void)
/* try to red vfd board id from the value defined by pull-ups */
- pcup_old = gpio->PCUP;
- pccon_old = gpio->PCCON;
+ pcup_old = gpio->pcup;
+ pccon_old = gpio->pccon;
- gpio->PCUP = (gpio->PCUP & 0xFFF0); /* activate GPC0...GPC3 pull-ups */
- gpio->PCCON = (gpio->PCCON & 0xFFFFFF00); /* configure GPC0...GPC3 as
+ gpio->pcup = (gpio->pcup & 0xFFF0); /* activate GPC0...GPC3 pull-ups */
+ gpio->pccon = (gpio->pccon & 0xFFFFFF00); /* configure GPC0...GPC3 as
* inputs */
udelay (10); /* allow signals to settle */
- vfd_board_id = (~gpio->PCDAT) & 0x000F; /* read GPC0...GPC3 port pins */
+ vfd_board_id = (~gpio->pcdat) & 0x000F; /* read GPC0...GPC3 port pins */
- gpio->PCCON = pccon_old;
- gpio->PCUP = pcup_old;
+ gpio->pccon = pccon_old;
+ gpio->pcup = pcup_old;
/* print vfd_board_id to console */
print_identifier ();
@@ -593,40 +593,40 @@ int do_buzzer (char * const *argv)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* set prescaler for timer 2, 3 and 4 */
- timers->TCFG0 &= ~0xFF00;
- timers->TCFG0 |= 0x0F00;
+ timers->tcfg0 &= ~0xFF00;
+ timers->tcfg0 |= 0x0F00;
/* set divider for timer 2 */
- timers->TCFG1 &= ~0xF00;
- timers->TCFG1 |= 0x300;
+ timers->tcfg1 &= ~0xF00;
+ timers->tcfg1 |= 0x300;
/* set frequency */
counter = (PCLK / BUZZER_FREQ) >> 9;
- timers->ch[2].TCNTB = counter;
- timers->ch[2].TCMPB = counter / 2;
+ timers->ch[2].tcntb = counter;
+ timers->ch[2].tcmpb = counter / 2;
if (strcmp (argv[2], "on") == 0) {
debug ("%s: frequency: %d\n", __FUNCTION__,
BUZZER_FREQ);
/* configure pin GPD7 as TOUT2 */
- gpio->PDCON &= ~0xC000;
- gpio->PDCON |= 0x8000;
+ gpio->pdcon &= ~0xC000;
+ gpio->pdcon |= 0x8000;
/* start */
- timers->TCON = (timers->TCON | UPDATE2 | RELOAD2) &
+ timers->tcon = (timers->tcon | UPDATE2 | RELOAD2) &
~INVERT2;
- timers->TCON = (timers->TCON | START2) & ~UPDATE2;
+ timers->tcon = (timers->tcon | START2) & ~UPDATE2;
return (0);
}
else if (strcmp (argv[2], "off") == 0) {
/* stop */
- timers->TCON &= ~(START2 | RELOAD2);
+ timers->tcon &= ~(START2 | RELOAD2);
/* configure GPD7 as output and set to low */
- gpio->PDCON &= ~0xC000;
- gpio->PDCON |= 0x4000;
- gpio->PDDAT &= ~0x80;
+ gpio->pdcon &= ~0xC000;
+ gpio->pdcon |= 0x4000;
+ gpio->pddat &= ~0x80;
return (0);
}
@@ -640,12 +640,12 @@ int do_led (char * const *argv)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure PC14 and PC15 as output */
- gpio->PCCON &= ~(0xF << 28);
- gpio->PCCON |= (0x5 << 28);
+ gpio->pccon &= ~(0xF << 28);
+ gpio->pccon |= (0x5 << 28);
/* configure PD0 and PD4 as output */
- gpio->PDCON &= ~((0x3 << 8) | 0x3);
- gpio->PDCON |= ((0x1 << 8) | 0x1);
+ gpio->pdcon &= ~((0x3 << 8) | 0x3);
+ gpio->pdcon |= ((0x1 << 8) | 0x1);
switch (simple_strtoul(argv[2], NULL, 10)) {
@@ -655,30 +655,30 @@ int do_led (char * const *argv)
case 2:
if (strcmp (argv[3], "on") == 0)
- gpio->PCDAT |= (1 << 14);
+ gpio->pcdat |= (1 << 14);
else
- gpio->PCDAT &= ~(1 << 14);
+ gpio->pcdat &= ~(1 << 14);
return 0;
case 3:
if (strcmp (argv[3], "on") == 0)
- gpio->PCDAT |= (1 << 15);
+ gpio->pcdat |= (1 << 15);
else
- gpio->PCDAT &= ~(1 << 15);
+ gpio->pcdat &= ~(1 << 15);
return 0;
case 4:
if (strcmp (argv[3], "on") == 0)
- gpio->PDDAT |= (1 << 0);
+ gpio->pddat |= (1 << 0);
else
- gpio->PDDAT &= ~(1 << 0);
+ gpio->pddat &= ~(1 << 0);
return 0;
case 5:
if (strcmp (argv[3], "on") == 0)
- gpio->PDDAT |= (1 << 4);
+ gpio->pddat |= (1 << 4);
else
- gpio->PDDAT &= ~(1 << 4);
+ gpio->pddat &= ~(1 << 4);
return 0;
default:
@@ -695,22 +695,22 @@ int do_full_bridge (char * const *argv)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* configure PD5 and PD6 as output */
- gpio->PDCON &= ~((0x3 << 5*2) | (0x3 << 6*2));
- gpio->PDCON |= ((0x1 << 5*2) | (0x1 << 6*2));
+ gpio->pdcon &= ~((0x3 << 5*2) | (0x3 << 6*2));
+ gpio->pdcon |= ((0x1 << 5*2) | (0x1 << 6*2));
if (strcmp (argv[2], "+") == 0) {
- gpio->PDDAT |= (1 << 5);
- gpio->PDDAT |= (1 << 6);
+ gpio->pddat |= (1 << 5);
+ gpio->pddat |= (1 << 6);
return 0;
}
else if (strcmp (argv[2], "-") == 0) {
- gpio->PDDAT &= ~(1 << 5);
- gpio->PDDAT |= (1 << 6);
+ gpio->pddat &= ~(1 << 5);
+ gpio->pddat |= (1 << 6);
return 0;
}
else if (strcmp (argv[2], "off") == 0) {
- gpio->PDDAT &= ~(1 << 5);
- gpio->PDDAT &= ~(1 << 6);
+ gpio->pddat &= ~(1 << 5);
+ gpio->pddat &= ~(1 << 6);
return 0;
}
printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);
@@ -804,15 +804,15 @@ int do_motor (char * const *argv)
struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
/* Configure I/O port */
- gpio->PGCON &= ~(0x3 << 0);
- gpio->PGCON |= (0x1 << 0);
+ gpio->pgcon &= ~(0x3 << 0);
+ gpio->pgcon |= (0x1 << 0);
if (strcmp (argv[2], "on") == 0) {
- gpio->PGDAT &= ~(1 << 0);
+ gpio->pgdat &= ~(1 << 0);
return 0;
}
if (strcmp (argv[2], "off") == 0) {
- gpio->PGDAT |= (1 << 0);
+ gpio->pgdat |= (1 << 0);
return 0;
}
printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);
@@ -832,36 +832,36 @@ int do_pwm (char * const *argv)
if (strcmp (argv[2], "on") == 0) {
/* configure pin GPD8 as TOUT3 */
- gpio->PDCON &= ~(0x3 << 8*2);
- gpio->PDCON |= (0x2 << 8*2);
+ gpio->pdcon &= ~(0x3 << 8*2);
+ gpio->pdcon |= (0x2 << 8*2);
/* set prescaler for timer 2, 3 and 4 */
- timers->TCFG0 &= ~0xFF00;
- timers->TCFG0 |= 0x0F00;
+ timers->tcfg0 &= ~0xFF00;
+ timers->tcfg0 |= 0x0F00;
/* set divider for timer 3 */
- timers->TCFG1 &= ~(0xf << 12);
- timers->TCFG1 |= (0x3 << 12);
+ timers->tcfg1 &= ~(0xf << 12);
+ timers->tcfg1 |= (0x3 << 12);
/* set frequency */
counter = (PCLK / PWM_FREQ) >> 9;
- timers->ch[3].TCNTB = counter;
- timers->ch[3].TCMPB = counter / 2;
+ timers->ch[3].tcntb = counter;
+ timers->ch[3].tcmpb = counter / 2;
/* start timer */
- timers->TCON = (timers->TCON | UPDATE3 | RELOAD3) & ~INVERT3;
- timers->TCON = (timers->TCON | START3) & ~UPDATE3;
+ timers->tcon = (timers->tcon | UPDATE3 | RELOAD3) & ~INVERT3;
+ timers->tcon = (timers->tcon | START3) & ~UPDATE3;
return 0;
}
if (strcmp (argv[2], "off") == 0) {
/* stop timer */
- timers->TCON &= ~(START2 | RELOAD2);
+ timers->tcon &= ~(START2 | RELOAD2);
/* configure pin GPD8 as output and set to 0 */
- gpio->PDCON &= ~(0x3 << 8*2);
- gpio->PDCON |= (0x1 << 8*2);
- gpio->PDDAT &= ~(1 << 8);
+ gpio->pdcon &= ~(0x3 << 8*2);
+ gpio->pdcon |= (0x1 << 8*2);
+ gpio->pddat &= ~(1 << 8);
return 0;
}
printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);