Merge with git://www.denx.de/git/u-boot.git

7 files changed, 334 insertions, 5 deletions

diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index bdd92ba..4c16d22 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -178,7 +178,7 @@
 #endif /* CONFIG_MPC5200 */
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 #define OF_CPU			"PowerPC,5200@0"
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 9743f03..f580cca 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -310,6 +310,9 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CFG_PCIE3_IO_BASE	0x00000000
 #define CFG_PCIE3_IO_PHYS	0xb0100000	/* reuse mem LAW */
 #define CFG_PCIE3_IO_SIZE	0x00100000	/* 1M */
+#define CFG_PCIE3_MEM_BASE2	0xb0200000
+#define CFG_PCIE3_MEM_PHYS2	CFG_PCIE3_MEM_BASE2
+#define CFG_PCIE3_MEM_SIZE2	0x00200000	/* 1M */
 
 #if defined(CONFIG_PCI)
 
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index c08173b..e0c9d81 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -701,7 +701,7 @@
  * Open firmware flat tree support
  *-----------------------------------------------------------------------
  */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 #define OF_CPU			"PowerPC,5200@0"
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 4070ab9..b7100e9 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -145,7 +145,7 @@
 
 #if 0
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 #define OF_CPU			"PowerPC,5200@0"
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 82827c6..9a21632 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -417,7 +417,7 @@ extern void __led_set(led_id_t id, int state);
 #define CFG_RESET_ADDRESS	0xfff00100
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 #define OF_CPU			"PowerPC,5200@0"
diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 824a812..c2e1386 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -400,7 +400,8 @@
  *----------------------------------------------------------------------*/
 /* General PCI */
 #define CONFIG_PCI			/* include pci support	        */
-#undef CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
+#define CONFIG_PCI_PNP			/* do pci plug-and-play   */
+#define CFG_PCI_CACHE_LINE_SIZE	0 /* to avoid problems with PNP */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
 #define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
 
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
new file mode 100644
index 0000000..84998d4
--- /dev/null
+++ b/include/configs/trizepsiv.h
@@ -0,0 +1,325 @@
+/*
+ * (C) Copyright 2007
+ * Stefano Babic, DENX Gmbh, sbabic@denx.de
+ *
+ * (C) Copyright 2004
+ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
+ *
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Configuation settings for the LUBBOCK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_PXA27X		1	/* This is an PXA27x CPU    */
+
+#define LITTLEENDIAN		1	/* used by usb_ohci.c		*/
+
+#define CONFIG_MMC		1
+#define BOARD_LATE_INIT		1
+
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+
+#define RTC
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_FFUART	       1       /* we use FFUART on Conxs */
+#define CONFIG_BTUART	       1       /* we use BTUART on Conxs */
+#define CONFIG_STUART	       1       /* we use STUART on Conxs */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE	       38400
+
+#define CONFIG_DOS_PARTITION   1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMLS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_SERVERIP		192.168.1.99
+#define CONFIG_BOOTCOMMAND	"run boot_flash"
+#define CONFIG_BOOTARGS		"console=ttyS0,38400 ramdisk_size=12288"\
+				" rw root=/dev/ram initrd=0xa0800000,5m"
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"program_boot_mmc="						\
+			"mw.b 0xa0010000 0xff 0x20000; "		\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0010000 u-boot.bin; "	\
+			"then "						\
+				"protect off 0x0 0x1ffff; "		\
+				"erase 0x0 0x1ffff; "			\
+				"cp.b 0xa0010000 0x0 0x20000; "		\
+			"fi\0"						\
+	"program_uzImage_mmc="						\
+			"mw.b 0xa0010000 0xff 0x180000; "		\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0010000 uzImage; "	\
+			"then "						\
+				"protect off 0x40000 0x1bffff; "	\
+				"erase 0x40000 0x1bffff; "		\
+				"cp.b 0xa0010000 0x40000 0x180000; "	\
+			"fi\0"						\
+	"program_ramdisk_mmc="						\
+			"mw.b 0xa0010000 0xff 0x500000; "		\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0010000 ramdisk.gz; "	\
+			"then "						\
+				"protect off 0x1c0000 0x6bffff; "	\
+				"erase 0x1c0000 0x6bffff; "		\
+				"cp.b 0xa0010000 0x1c0000 0x500000; "	\
+			"fi\0"						\
+	"boot_mmc="							\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0030000 uzImage && "	\
+				"fatload mmc 0 0xa0800000 ramdisk.gz; "	\
+			"then "						\
+				"bootm 0xa0030000; "			\
+			"fi\0"						\
+	"boot_flash="							\
+			"cp.b 0x1c0000 0xa0800000 0x500000; "		\
+			"bootm 0x40000\0"				\
+
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
+/* #define CONFIG_INITRD_TAG	 1 */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_HUSH_PARSER		1
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#define CFG_LONGHELP				/* undef to save memory		*/
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT		"$ "		/* Monitor Command Prompt */
+#else
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#endif
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_DEVICE_NULLDEV	1
+
+#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
+
+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR		0xa1000000	/* default load address */
+
+#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
+
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_MMC_BASE		0xF0000000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
+#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
+#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
+#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
+#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
+#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
+#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
+#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */
+
+#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
+
+#define CFG_DRAM_BASE		0xa0000000
+#define CFG_DRAM_SIZE		0x04000000
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
+
+/*
+ * GPIO settings
+ */
+#define CFG_GPSR0_VAL		0x00018000
+#define CFG_GPSR1_VAL		0x00000000
+#define CFG_GPSR2_VAL		0x400dc000
+#define CFG_GPSR3_VAL		0x00000000
+#define CFG_GPCR0_VAL		0x00000000
+#define CFG_GPCR1_VAL		0x00000000
+#define CFG_GPCR2_VAL		0x00000000
+#define CFG_GPCR3_VAL		0x00000000
+#define CFG_GPDR0_VAL		0x00018000
+#define CFG_GPDR1_VAL		0x00028801
+#define CFG_GPDR2_VAL		0x520dc000
+#define CFG_GPDR3_VAL		0x0001E000
+#define CFG_GAFR0_L_VAL		0x801c0000
+#define CFG_GAFR0_U_VAL		0x00000013
+#define CFG_GAFR1_L_VAL		0x6990100A
+#define CFG_GAFR1_U_VAL		0x00000008
+#define CFG_GAFR2_L_VAL		0xA0000000
+#define CFG_GAFR2_U_VAL		0x010900F2
+#define CFG_GAFR3_L_VAL		0x54000003
+#define CFG_GAFR3_U_VAL		0x00002401
+#define CFG_GRER0_VAL		0x00000000
+#define CFG_GRER1_VAL		0x00000000
+#define CFG_GRER2_VAL		0x00000000
+#define CFG_GRER3_VAL		0x00000000
+#define CFG_GFER0_VAL		0x00000000
+#define CFG_GFER1_VAL		0x00000000
+#define CFG_GFER2_VAL		0x00000000
+#define CFG_GFER3_VAL		0x00000020
+
+
+#define CFG_PSSR_VAL		0x20	/* CHECK */
+
+/*
+ * Clock settings
+ */
+#define CFG_CKEN		0x01FFFFFF	/* CHECK */
+#define CFG_CCCR		0x02000290 /*   520Mhz */
+
+/*
+ * Memory settings
+ */
+
+#define CFG_MSC0_VAL		0x4df84df0
+#define CFG_MSC1_VAL		0x7ff87ff4
+#define CFG_MSC2_VAL		0xa26936d4
+#define CFG_MDCNFG_VAL		0x880009C9
+#define CFG_MDREFR_VAL		0x20ca201e
+#define CFG_MDMRS_VAL		0x00220022
+
+#define CFG_FLYCNFG_VAL		0x00000000
+#define CFG_SXCNFG_VAL		0x40044004
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CFG_MECR_VAL		0x00000001
+#define CFG_MCMEM0_VAL		0x00004204
+#define CFG_MCMEM1_VAL		0x00010204
+#define CFG_MCATT0_VAL		0x00010504
+#define CFG_MCATT1_VAL		0x00010504
+#define CFG_MCIO0_VAL		0x00008407
+#define CFG_MCIO1_VAL		0x0000c108
+
+#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_DM9000_BASE	0x08000000
+#define DM9000_IO			CONFIG_DM9000_BASE
+#define DM9000_DATA			(CONFIG_DM9000_BASE+0x8004)
+/* #define CONFIG_DM9000_USE_8BIT */
+/* #define CONFIG_DM9000_USE_16BIT */
+#define CONFIG_DM9000_USE_32BIT
+
+#define CONFIG_USB_OHCI_NEW	1
+#define CFG_USB_OHCI_BOARD_INIT	1
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	3
+#define CFG_USB_OHCI_REGS_BASE	0x4C000000
+#define CFG_USB_OHCI_SLOT_NAME	"trizepsiv"
+#define CONFIG_USB_STORAGE	1
+#define CFG_USB_OHCI_CPU_INIT	1
+
+/*
+ * FLASH and environment organization
+ */
+
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER	1
+
+#define CFG_MONITOR_BASE	0
+#define CFG_MONITOR_LEN		0x40000
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	4 + 255  /* max number of sectors on one chip    */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+
+/* write flash less slowly */
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+
+/* Flash environment locations */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_MONITOR_LEN)	/* Addr of Environment Sector	*/
+#define CFG_ENV_SIZE		0x40000	/* Total Size of Environment     	*/
+#define CFG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+#endif	/* __CONFIG_H */