Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (145 commits)
  beagleboard: enable HUB power on all variants of the BeagleBoard
  dm3730: enable dpll5
  ehci-hcd: Allow cleanups to happen gracefully on a timeout.
  OMAP3: Add DSS driver for OMAP3
  led: Remove state-saving of led for toggle functionality and add toggle option to led command
  led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all'
  led: correct off/on locations in structure
  led: added cmd_led to Makefile
  BeagleBoard: fix LED 0/1 in driver
  Corrected LED name match finding avoiding extraneous Usage printouts
  BeagleBoard: config: updated default configuration
  BeagleBoard: config: Enabled multibus support for I2C in configuration
  BeagleBoard: config: add optargs/buddy/camera
  BeagleBoard: config: increase command-line functionality
  BeagleBoard: config: make mtest run
  BeagleBoard: config: enable DSS
  BeagleBoard: config: enable asix driver and dhcp
  BeagleBoard: config: enable networking
  BeagleBoard: config: decrease bootdelay to 2 seconds
  BeagleBoard: config: use uImage.beagle for tftp
  BeagleBoard: config: hardcode MAC for onboard SMSC
  BeagleBoard: config: load kernel from MMC ext, not FAT
  BeagleBoard: Configure DVI/S-video
  BeagleBoard: Added userbutton command
  BeagleBoard: turn off clocks in ehci_stop
  USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
  beagleboard: add support for xM revision C
  beagle: pass expansionboard name in bootargs
  OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
  OMAP3 Beagle Pin Mux initialization glitch fix
  da850: modifications for Logic PD Rev.3 AM18xx EVM
  da850: fix the channel number for EMAC teardown init
  da850: add support for Spectrum Digital AM18xx EVM
  da850: add support to wake up DSP during board init
  da850: modify the U-Boot prompt string
  da850: add NOR boot mode support
  da8xx: add support for multiple PLL controllers
  da850: indicate cache usage disable in config file
  dm365: modify boot prompt from dm365 to dm36x
  dm365: disable cache usage due to coherency issues
  dm6446: disable cache usage due to coherency issues
  OMAP3: Remove legacy mmc driver
  devkit8000: Use generic MMC driver
  TI OMAP3 SDP3430: Use generic MMC driver
  AM3517 CraneBoard: Use generic MMC driver
  OMAP3: pandora: Use generic MMC driver
  OMAP3: Zoom2: Use generic MMC driver
  OMAP3: Zoom1: Use generic MMC driver
  OMAP3: DIG297: Use generic MMC driver
  OMAP3: CM-T35: Use generic MMC driver
  am3517evm: Use generic MMC driver
  omap3evm: Use generic MMC driver
  omap3:clock: check cpu_family before enabling clks for IVA & CAM
  omap3:clock: configure GFX clock to 200MHz for AM/DM37x
  OMAP3/4: Increase console I/O buffer size
  PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE
  PXA: Fix CSB226, fix monitor length
  PXA: Fix Lubbock, remove redundant parenthesis
  armv7: cache: remove flush on un-aligned invalidate
  armv7: stronger barrier for cache-maintenance operations
  omap: enable caches at system start-up
  arm: do not force d-cache enable on all boards
  ORIGEN: Add MMC SPL support
  ARMV7: Add support for Samsung ORIGEN board
  i2c:gpio:s5p: Enable I2C GPIO on the GONI target
  i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)
  Tegra2: Use clock and pinmux functions to simplify code
  Tegra2: Add additional pin multiplexing features
  Tegra2: Add more clock support
  Tegra2: Add microsecond timer function
  ARM: remove broken "at91rm9200dk" board
  ARM: remove broken "m501sk" board
  ARM: remove broken "kb9202" board
  ARM: remove broken "csb637" board
  ARM: remove broken "cmc_pu2" board
  ARM: remove broken "at91cap9adk" board
  ARM: remove broken "voiceblue" board
  ARM: remove broken "smdk2400" board
  ARM: remove broken "sbc2410x" board
  ARM: remove broken "netstar" board
  ARM: remove broken "mx1fs2" board
  ARM: remove broken "lpd7a40x" boards
  ARM: remove broken "edb93xx" boards
  ARM: remove broken "B2" board
  ARM: remove broken "armadillo" board
  ARM: remove broken "assabet" board
  ARM: versatile: drop warnings
  IMX: scb9328: drop warnings
  MX31: imx31_litekit: make use of GPIO framework
  MX31: mx31ads: make use of GPIO framework
  MX5: mx51evk: make use of GPIO framework
  MX35: mx35pdk: make use of GPIO framework
  MX5: mx53loco: make use of GPIO framework
  MX5: mx53evk: make use of GPIO framework
  MX5: vision2: make use of GPIO framework
  MX5: mx53smd: make use of GPIO framework
  MX5: mx53ard: make use of GPIO framework
  MX25: zmx25: make use of GPIO framework
  MX5: efikamx: make use of GPIO framework
  MX31: QONG: make use of GPIO framework
  MX35: make use of GPIO framework for MX35 processor
  MX5: make use of GPIO framework for MX5 processor
  MX31: make use of GPIO framework for MX31 processor
  MX25: make use of GPIO framework for MX25 processor
  IMX: uniform GPIO interface using GPIO framework
  MX: MX35 / MX5: uniform clock command with powerpc
  MX35: MX35PDK: support additional RAM on CSD1
  mx53: ddr3: Update DD3 initialization
  ARM: MX51: PLL errata workaround
  ARM: versatilepb : drop warnings due to double definitions
  omap4: increase SRAM budget to fix build error
  omap4: fix build warning due to signed unsigned comparison
  mkimage: Fix 'Unknown OMAP image type - 5'
  omap: fix gpio related build breaks
  gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
  SMDKV310: MMC SPL: Remove unwanted dummy functions
  SMDKV310: Fix undefined reference error
  SMDKV310: Fix build error for smdkv310 board
  gpio:samsung s5p_ suffix add for GPIO functions
  mmc: S5P: Support DMA restarts at buffer boundaries
  SMDKV310: Fix host compilation of mkv310_image
  arm: fix bd pointer dereference prior initialization
  arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
  mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
  MX31: removed warnings due to clock.h
  integrator: convert to new build system
  integratorcp: make the board compile
  integratorap: remove hardcoded 32MB memory cmdline
  ...

1 files changed, 0 insertions, 117 deletions

diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
deleted file mode 100644
index 7535f62..0000000
--- a/include/configs/lpd7a404.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LPD7A404_H_
-#define __LPD7A404_H_
-
-#define CONFIG_LPD7A404		/* Logic LH7A400 SDK */
-
-#undef CONFIG_USE_IRQ
-
-/*
- * This board uses the logic LH7A404-10 card engine
- */
-#include <configs/lpd7a404-10.h>
-
-#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS	1
-#define CONFIG_INITRD_TAG		1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LH7A40X_SERIAL
-#define CONFIG_CONSOLE_UART2	/* UART2 LH7A40x for console */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_IPADDR		192.168.1.100
-#define CONFIG_NETMASK		255.255.1.0
-#define CONFIG_SERVERIP		192.168.1.1
-
-#define	CONFIG_TIMESTAMP	1	/* Print timestamp info for images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifndef USE_920T_MMU
-    #define CONFIG_CMD_PING
-    #undef CONFIG_CMD_CACHE
-#else
-    #define CONFIG_CMD_DATE
-#endif
-
-
-#define CONFIG_BOOTDELAY	3
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX	1		/* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		"LPD7A404> "	/* Monitor Command Prompt	*/
-#define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0xc0300000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0xc0500000	/* 2 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0xc0f00000	/* default load address	*/
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
-
-/* size and location of u-boot in flash */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256<<10)
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-
-/* Address and size of Primary Environment Sector	*/
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0xFC0000)
-#define CONFIG_ENV_SIZE		0x40000
-
-#endif  /* __LPD7A404_H_ */