summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2011-09-04 21:12:18 +0200
committerWolfgang Denk <wd@denx.de>2011-09-04 21:12:18 +0200
commit6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833 (patch)
tree154fe4abb74f5e03962506168c7d8c4869f7ac8a
parentdc344589ded4fb4d63ba7f0cdf670e2ffcf5e5a0 (diff)
parent38a77c3adb3ee559b135217769f5c49f3c8b62c9 (diff)
downloadu-boot-imx-6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833.zip
u-boot-imx-6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833.tar.gz
u-boot-imx-6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: (145 commits) beagleboard: enable HUB power on all variants of the BeagleBoard dm3730: enable dpll5 ehci-hcd: Allow cleanups to happen gracefully on a timeout. OMAP3: Add DSS driver for OMAP3 led: Remove state-saving of led for toggle functionality and add toggle option to led command led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all' led: correct off/on locations in structure led: added cmd_led to Makefile BeagleBoard: fix LED 0/1 in driver Corrected LED name match finding avoiding extraneous Usage printouts BeagleBoard: config: updated default configuration BeagleBoard: config: Enabled multibus support for I2C in configuration BeagleBoard: config: add optargs/buddy/camera BeagleBoard: config: increase command-line functionality BeagleBoard: config: make mtest run BeagleBoard: config: enable DSS BeagleBoard: config: enable asix driver and dhcp BeagleBoard: config: enable networking BeagleBoard: config: decrease bootdelay to 2 seconds BeagleBoard: config: use uImage.beagle for tftp BeagleBoard: config: hardcode MAC for onboard SMSC BeagleBoard: config: load kernel from MMC ext, not FAT BeagleBoard: Configure DVI/S-video BeagleBoard: Added userbutton command BeagleBoard: turn off clocks in ehci_stop USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor beagleboard: add support for xM revision C beagle: pass expansionboard name in bootargs OMAP: Remove omapfb.debug=y from Beagle and Overo env settings OMAP3 Beagle Pin Mux initialization glitch fix da850: modifications for Logic PD Rev.3 AM18xx EVM da850: fix the channel number for EMAC teardown init da850: add support for Spectrum Digital AM18xx EVM da850: add support to wake up DSP during board init da850: modify the U-Boot prompt string da850: add NOR boot mode support da8xx: add support for multiple PLL controllers da850: indicate cache usage disable in config file dm365: modify boot prompt from dm365 to dm36x dm365: disable cache usage due to coherency issues dm6446: disable cache usage due to coherency issues OMAP3: Remove legacy mmc driver devkit8000: Use generic MMC driver TI OMAP3 SDP3430: Use generic MMC driver AM3517 CraneBoard: Use generic MMC driver OMAP3: pandora: Use generic MMC driver OMAP3: Zoom2: Use generic MMC driver OMAP3: Zoom1: Use generic MMC driver OMAP3: DIG297: Use generic MMC driver OMAP3: CM-T35: Use generic MMC driver am3517evm: Use generic MMC driver omap3evm: Use generic MMC driver omap3:clock: check cpu_family before enabling clks for IVA & CAM omap3:clock: configure GFX clock to 200MHz for AM/DM37x OMAP3/4: Increase console I/O buffer size PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE PXA: Fix CSB226, fix monitor length PXA: Fix Lubbock, remove redundant parenthesis armv7: cache: remove flush on un-aligned invalidate armv7: stronger barrier for cache-maintenance operations omap: enable caches at system start-up arm: do not force d-cache enable on all boards ORIGEN: Add MMC SPL support ARMV7: Add support for Samsung ORIGEN board i2c:gpio:s5p: Enable I2C GPIO on the GONI target i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c) Tegra2: Use clock and pinmux functions to simplify code Tegra2: Add additional pin multiplexing features Tegra2: Add more clock support Tegra2: Add microsecond timer function ARM: remove broken "at91rm9200dk" board ARM: remove broken "m501sk" board ARM: remove broken "kb9202" board ARM: remove broken "csb637" board ARM: remove broken "cmc_pu2" board ARM: remove broken "at91cap9adk" board ARM: remove broken "voiceblue" board ARM: remove broken "smdk2400" board ARM: remove broken "sbc2410x" board ARM: remove broken "netstar" board ARM: remove broken "mx1fs2" board ARM: remove broken "lpd7a40x" boards ARM: remove broken "edb93xx" boards ARM: remove broken "B2" board ARM: remove broken "armadillo" board ARM: remove broken "assabet" board ARM: versatile: drop warnings IMX: scb9328: drop warnings MX31: imx31_litekit: make use of GPIO framework MX31: mx31ads: make use of GPIO framework MX5: mx51evk: make use of GPIO framework MX35: mx35pdk: make use of GPIO framework MX5: mx53loco: make use of GPIO framework MX5: mx53evk: make use of GPIO framework MX5: vision2: make use of GPIO framework MX5: mx53smd: make use of GPIO framework MX5: mx53ard: make use of GPIO framework MX25: zmx25: make use of GPIO framework MX5: efikamx: make use of GPIO framework MX31: QONG: make use of GPIO framework MX35: make use of GPIO framework for MX35 processor MX5: make use of GPIO framework for MX5 processor MX31: make use of GPIO framework for MX31 processor MX25: make use of GPIO framework for MX25 processor IMX: uniform GPIO interface using GPIO framework MX: MX35 / MX5: uniform clock command with powerpc MX35: MX35PDK: support additional RAM on CSD1 mx53: ddr3: Update DD3 initialization ARM: MX51: PLL errata workaround ARM: versatilepb : drop warnings due to double definitions omap4: increase SRAM budget to fix build error omap4: fix build warning due to signed unsigned comparison mkimage: Fix 'Unknown OMAP image type - 5' omap: fix gpio related build breaks gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal) SMDKV310: MMC SPL: Remove unwanted dummy functions SMDKV310: Fix undefined reference error SMDKV310: Fix build error for smdkv310 board gpio:samsung s5p_ suffix add for GPIO functions mmc: S5P: Support DMA restarts at buffer boundaries SMDKV310: Fix host compilation of mkv310_image arm: fix bd pointer dereference prior initialization arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF MX31: removed warnings due to clock.h integrator: convert to new build system integratorcp: make the board compile integratorap: remove hardcoded 32MB memory cmdline ...
-rw-r--r--MAINTAINERS15
-rwxr-xr-xMAKEALL69
-rw-r--r--Makefile84
-rw-r--r--arch/arm/cpu/arm1136/mx35/generic.c4
-rw-r--r--arch/arm/cpu/arm720t/cpu.c5
-rw-r--r--arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c114
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/cpu.c30
-rw-r--r--arch/arm/cpu/armv7/cache_v7.c26
-rw-r--r--arch/arm/cpu/armv7/mx5/clock.c4
-rw-r--r--arch/arm/cpu/armv7/mx5/lowlevel_init.S38
-rw-r--r--arch/arm/cpu/armv7/omap-common/gpio.c2
-rw-r--r--arch/arm/cpu/armv7/omap3/board.c10
-rw-r--r--arch/arm/cpu/armv7/omap3/clock.c17
-rw-r--r--arch/arm/cpu/armv7/omap4/board.c10
-rw-r--r--arch/arm/cpu/armv7/tegra2/Makefile2
-rw-r--r--arch/arm/cpu/armv7/tegra2/ap20.c91
-rw-r--r--arch/arm/cpu/armv7/tegra2/clock.c158
-rw-r--r--arch/arm/cpu/armv7/tegra2/pinmux.c (renamed from board/atmel/at91cap9adk/led.c)43
-rw-r--r--arch/arm/cpu/armv7/tegra2/timer.c18
-rw-r--r--arch/arm/include/asm/arch-at91/at91sam9g45.h16
-rw-r--r--arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h194
-rw-r--r--arch/arm/include/asm/arch-davinci/hardware.h14
-rw-r--r--arch/arm/include/asm/arch-mx25/gpio.h (renamed from include/mxc_gpio.h)42
-rw-r--r--arch/arm/include/asm/arch-mx25/imx-regs.h12
-rw-r--r--arch/arm/include/asm/arch-mx31/clock.h2
-rw-r--r--arch/arm/include/asm/arch-mx31/gpio.h (renamed from board/edb93xx/early_udelay.h)23
-rw-r--r--arch/arm/include/asm/arch-mx31/imx-regs.h7
-rw-r--r--arch/arm/include/asm/arch-mx35/gpio.h (renamed from board/atmel/at91cap9adk/partition.c)37
-rw-r--r--arch/arm/include/asm/arch-mx5/gpio.h35
-rw-r--r--arch/arm/include/asm/arch-mx5/imx-regs.h12
-rw-r--r--arch/arm/include/asm/arch-omap3/clocks_omap3.h1
-rw-r--r--arch/arm/include/asm/arch-omap3/dss.h174
-rw-r--r--arch/arm/include/asm/arch-omap3/gpio.h50
-rw-r--r--arch/arm/include/asm/arch-omap3/omap3.h8
-rw-r--r--arch/arm/include/asm/arch-omap4/clocks.h12
-rw-r--r--arch/arm/include/asm/arch-omap4/gpio.h50
-rw-r--r--arch/arm/include/asm/arch-omap4/omap4.h8
-rw-r--r--arch/arm/include/asm/arch-s5pc1xx/gpio.h29
-rw-r--r--arch/arm/include/asm/arch-s5pc2xx/gpio.h45
-rw-r--r--arch/arm/include/asm/arch-tegra2/clk_rst.h127
-rw-r--r--arch/arm/include/asm/arch-tegra2/clock.h263
-rw-r--r--arch/arm/include/asm/arch-tegra2/pinmux.h161
-rw-r--r--arch/arm/include/asm/arch-tegra2/timer.h (renamed from board/edb93xx/flash_cfg.c)22
-rw-r--r--arch/arm/lib/board.c19
-rw-r--r--arch/arm/lib/cache-pl310.c15
-rw-r--r--arch/arm/lib/cache.c12
-rw-r--r--arch/arm/lib/memcpy.S3
-rw-r--r--board/armadillo/armadillo.c72
-rw-r--r--board/armadillo/config.mk29
-rw-r--r--board/armadillo/flash.c340
-rw-r--r--board/armadillo/lowlevel_init.S66
-rw-r--r--board/armltd/integrator/integrator.c15
-rw-r--r--board/armltd/integrator/lowlevel_init.S2
-rwxr-xr-xboard/armltd/integrator/split_by_variant.sh220
-rw-r--r--board/armltd/versatile/versatile.c2
-rw-r--r--board/assabet/Makefile53
-rw-r--r--board/assabet/assabet.c131
-rw-r--r--board/assabet/config.mk7
-rw-r--r--board/assabet/setup.S136
-rw-r--r--board/atmel/at91cap9adk/Makefile56
-rw-r--r--board/atmel/at91cap9adk/at91cap9adk.c352
-rw-r--r--board/atmel/at91cap9adk/config.mk1
-rw-r--r--board/atmel/at91rm9200dk/Makefile56
-rw-r--r--board/atmel/at91rm9200dk/at91rm9200dk.c167
-rw-r--r--board/atmel/at91rm9200dk/config.mk1
-rw-r--r--board/atmel/at91rm9200dk/flash.c504
-rw-r--r--board/atmel/at91rm9200dk/led.c80
-rw-r--r--board/atmel/at91rm9200dk/mux.c29
-rw-r--r--board/atmel/at91rm9200dk/partition.c40
-rw-r--r--board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c115
-rw-r--r--board/atmel/at91sam9m10g45ek/led.c6
-rw-r--r--board/calao/sbc35_a9g20/sbc35_a9g20.c88
-rw-r--r--board/calao/tny_a9260/tny_a9260.c55
-rw-r--r--board/cm_t35/cm_t35.c8
-rw-r--r--board/cmc_pu2/Makefile50
-rw-r--r--board/cmc_pu2/cmc_pu2.c192
-rw-r--r--board/cmc_pu2/config.mk3
-rw-r--r--board/cmc_pu2/flash.c469
-rw-r--r--board/cmc_pu2/load_sernum_ethaddr.c113
-rw-r--r--board/comelit/dig297/dig297.c9
-rw-r--r--board/csb637/Makefile50
-rw-r--r--board/csb637/config.mk1
-rw-r--r--board/csb637/csb637.c94
-rw-r--r--board/dave/B2/B2.c139
-rw-r--r--board/dave/B2/Makefile55
-rw-r--r--board/dave/B2/config.mk30
-rw-r--r--board/dave/B2/flash.c76
-rw-r--r--board/dave/B2/lowlevel_init.S167
-rw-r--r--board/davedenx/qong/fpga.c10
-rw-r--r--board/davedenx/qong/qong.c36
-rw-r--r--board/davinci/da8xxevm/da850evm.c123
-rw-r--r--board/edb93xx/Makefile50
-rw-r--r--board/edb93xx/config.mk33
-rw-r--r--board/edb93xx/edb93xx.c110
-rw-r--r--board/edb93xx/pll_cfg.c58
-rw-r--r--board/edb93xx/pll_cfg.h72
-rw-r--r--board/edb93xx/sdram_cfg.c146
-rw-r--r--board/edb93xx/sdram_cfg.h144
-rw-r--r--board/efikamx/efikamx.c62
-rw-r--r--board/esd/meesc/config.mk1
-rw-r--r--board/esd/meesc/meesc.c49
-rw-r--r--board/freescale/mx35pdk/lowlevel_init.S9
-rw-r--r--board/freescale/mx35pdk/mx35pdk.c22
-rw-r--r--board/freescale/mx51evk/mx51evk.c18
-rw-r--r--board/freescale/mx53ard/imximage_dd3.cfg6
-rw-r--r--board/freescale/mx53ard/mx53ard.c8
-rw-r--r--board/freescale/mx53evk/mx53evk.c6
-rw-r--r--board/freescale/mx53loco/imximage.cfg6
-rw-r--r--board/freescale/mx53loco/mx53loco.c6
-rw-r--r--board/freescale/mx53smd/imximage.cfg6
-rw-r--r--board/freescale/mx53smd/mx53smd.c4
-rw-r--r--board/kb9202/Makefile53
-rw-r--r--board/kb9202/config.mk1
-rw-r--r--board/kb9202/kb9202.c107
-rw-r--r--board/logicpd/am3517evm/am3517evm.c9
-rw-r--r--board/logicpd/zoom1/zoom1.c9
-rw-r--r--board/logicpd/zoom2/zoom2.c9
-rw-r--r--board/lpd7a40x/Makefile51
-rw-r--r--board/lpd7a40x/config.mk38
-rw-r--r--board/lpd7a40x/flash.c490
-rw-r--r--board/lpd7a40x/lowlevel_init.S212
-rw-r--r--board/lpd7a40x/lpd7a40x.c93
-rw-r--r--board/lubbock/flash.c2
-rw-r--r--board/m501sk/Makefile50
-rw-r--r--board/m501sk/config.mk1
-rw-r--r--board/m501sk/eeprom.c102
-rw-r--r--board/m501sk/m501sk.c203
-rw-r--r--board/m501sk/m501sk.h167
-rw-r--r--board/mx1fs2/Makefile51
-rw-r--r--board/mx1fs2/config.mk10
-rw-r--r--board/mx1fs2/flash.c849
-rw-r--r--board/mx1fs2/intel.h99
-rw-r--r--board/mx1fs2/lowlevel_init.S188
-rw-r--r--board/mx1fs2/mx1fs2.c122
-rw-r--r--board/netstar/Makefile95
-rw-r--r--board/netstar/config.mk11
-rw-r--r--board/netstar/crcek.S241
-rw-r--r--board/netstar/crcek.h3
-rw-r--r--board/netstar/crcit.c87
-rw-r--r--board/netstar/eeprom.c218
-rw-r--r--board/netstar/netstar.c129
-rw-r--r--board/netstar/setup.S284
-rw-r--r--board/nvidia/common/board.c119
-rw-r--r--board/pandora/pandora.c10
-rw-r--r--board/ronetix/pm9261/led.c9
-rw-r--r--board/ronetix/pm9261/pm9261.c38
-rw-r--r--board/ronetix/pm9263/led.c9
-rw-r--r--board/ronetix/pm9263/pm9263.c42
-rw-r--r--board/ronetix/pm9g45/pm9g45.c32
-rw-r--r--board/samsung/goni/goni.c8
-rw-r--r--board/samsung/origen/Makefile (renamed from board/armadillo/Makefile)41
-rw-r--r--board/samsung/origen/lowlevel_init.S357
-rw-r--r--board/samsung/origen/mem_setup.S421
-rw-r--r--board/samsung/origen/mmc_boot.c58
-rw-r--r--board/samsung/origen/origen.c109
-rw-r--r--board/samsung/origen/origen_setup.h546
-rw-r--r--board/samsung/origen/tools/mkv310_image.c126
-rw-r--r--board/samsung/smdk2400/Makefile51
-rw-r--r--board/samsung/smdk2400/config.mk25
-rw-r--r--board/samsung/smdk2400/flash.c492
-rw-r--r--board/samsung/smdk2400/lowlevel_init.S163
-rw-r--r--board/samsung/smdk2400/smdk2400.c125
-rw-r--r--board/samsung/smdk6400/smdk6400.c1
-rw-r--r--board/samsung/smdkc100/smdkc100.c2
-rw-r--r--board/samsung/smdkv310/smdkv310.c10
-rw-r--r--board/samsung/universal_c210/universal.c28
-rw-r--r--board/sbc2410x/Makefile51
-rw-r--r--board/sbc2410x/config.mk23
-rw-r--r--board/sbc2410x/flash.c433
-rw-r--r--board/sbc2410x/lowlevel_init.S163
-rw-r--r--board/sbc2410x/sbc2410x.c193
-rw-r--r--board/scb9328/scb9328.c2
-rw-r--r--board/syteco/zmx25/zmx25.c35
-rw-r--r--board/ti/am3517crane/am3517crane.c9
-rw-r--r--board/ti/beagle/beagle.c118
-rw-r--r--board/ti/beagle/beagle.h87
-rw-r--r--board/ti/beagle/led.c32
-rw-r--r--board/ti/evm/evm.c9
-rw-r--r--board/ti/omap1610inn/omap1610innovator.c7
-rw-r--r--board/ti/sdp3430/sdp.c9
-rw-r--r--board/timll/devkit8000/devkit8000.c9
-rw-r--r--board/ttcontrol/vision2/vision2.c71
-rw-r--r--board/voiceblue/Makefile74
-rw-r--r--board/voiceblue/config.mk1
-rw-r--r--board/voiceblue/eeprom.c218
-rw-r--r--board/voiceblue/setup.S280
-rw-r--r--board/voiceblue/voiceblue.c80
-rw-r--r--boards.cfg39
-rw-r--r--common/Makefile1
-rw-r--r--common/cmd_led.c73
-rw-r--r--doc/README.arm-caches51
-rw-r--r--doc/README.imx517
-rw-r--r--doc/README.scrapyard23
-rw-r--r--drivers/gpio/mxc_gpio.c51
-rw-r--r--drivers/gpio/s5p_gpio.c64
-rw-r--r--drivers/mmc/Makefile1
-rw-r--r--drivers/mmc/omap3_mmc.c570
-rw-r--r--drivers/mmc/omap3_mmc.h233
-rw-r--r--drivers/mmc/s5p_mmc.c15
-rw-r--r--drivers/net/davinci_emac.c4
-rw-r--r--drivers/spi/mxc_spi.c8
-rw-r--r--drivers/usb/host/ehci-hcd.c1
-rw-r--r--drivers/usb/host/ehci.h4
-rw-r--r--drivers/video/Makefile2
-rw-r--r--drivers/video/omap3_dss.c131
-rw-r--r--include/common.h1
-rw-r--r--include/configs/B2.h216
-rw-r--r--include/configs/am3517_crane.h10
-rw-r--r--include/configs/am3517_evm.h10
-rw-r--r--include/configs/armadillo.h157
-rw-r--r--include/configs/assabet.h173
-rw-r--r--include/configs/at91cap9adk.h218
-rw-r--r--include/configs/at91rm9200dk.h202
-rw-r--r--include/configs/at91sam9m10g45ek.h193
-rw-r--r--include/configs/cm_t35.h3
-rw-r--r--include/configs/cmc_pu2.h238
-rw-r--r--include/configs/csb226.h2
-rw-r--r--include/configs/csb637.h196
-rw-r--r--include/configs/da850evm.h26
-rw-r--r--include/configs/davinci_dm365evm.h5
-rw-r--r--include/configs/davinci_dvevm.h3
-rw-r--r--include/configs/devkit8000.h10
-rw-r--r--include/configs/dig297.h5
-rw-r--r--include/configs/edb93xx.h269
-rw-r--r--include/configs/efikamx.h2
-rw-r--r--include/configs/imx31_litekit.h1
-rw-r--r--include/configs/integratorap.h21
-rw-r--r--include/configs/integratorcp.h8
-rw-r--r--include/configs/kb9202.h196
-rw-r--r--include/configs/lpd7a400-10.h80
-rw-r--r--include/configs/lpd7a400.h117
-rw-r--r--include/configs/lpd7a404-10.h80
-rw-r--r--include/configs/lpd7a404.h117
-rw-r--r--include/configs/m501sk.h228
-rw-r--r--include/configs/meesc.h202
-rw-r--r--include/configs/mx1fs2.h305
-rw-r--r--include/configs/mx31ads.h1
-rw-r--r--include/configs/mx35pdk.h7
-rw-r--r--include/configs/mx51evk.h3
-rw-r--r--include/configs/mx53ard.h2
-rw-r--r--include/configs/mx53evk.h2
-rw-r--r--include/configs/mx53loco.h2
-rw-r--r--include/configs/mx53smd.h2
-rw-r--r--include/configs/netstar.h245
-rw-r--r--include/configs/omap1610h2.h3
-rw-r--r--include/configs/omap1610inn.h3
-rw-r--r--include/configs/omap3_beagle.h77
-rw-r--r--include/configs/omap3_evm.h12
-rw-r--r--include/configs/omap3_overo.h4
-rw-r--r--include/configs/omap3_pandora.h7
-rw-r--r--include/configs/omap3_sdp3430.h5
-rw-r--r--include/configs/omap3_zoom1.h12
-rw-r--r--include/configs/omap3_zoom2.h5
-rw-r--r--include/configs/omap4_panda.h4
-rw-r--r--include/configs/omap4_sdp4430.h4
-rw-r--r--include/configs/origen.h168
-rw-r--r--include/configs/pm9261.h18
-rw-r--r--include/configs/pm9263.h17
-rw-r--r--include/configs/pm9g45.h16
-rw-r--r--include/configs/s5p_goni.h12
-rw-r--r--include/configs/sbc2410x.h220
-rw-r--r--include/configs/sbc35_a9g20.h87
-rw-r--r--include/configs/smdk2400.h189
-rw-r--r--include/configs/smdk6400.h2
-rw-r--r--include/configs/tny_a9260.h85
-rw-r--r--include/configs/versatile.h4
-rw-r--r--include/configs/vision2.h1
-rw-r--r--include/configs/voiceblue.h241
-rw-r--r--include/configs/vpac270.h1
-rw-r--r--mmc_spl/board/samsung/smdkv310/Makefile1
-rw-r--r--mmc_spl/board/samsung/smdkv310/mmc_boot.c28
-rw-r--r--mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c1
-rw-r--r--mmc_spl/board/samsung/smdkv310/u-boot.lds2
-rw-r--r--spl/Makefile10
-rw-r--r--tools/omapimage.c1
275 files changed, 5023 insertions, 16970 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 7982c36..84faea2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -564,10 +564,6 @@ Albert ARIBAUD <albert.u.boot@aribaud.net>
edminiv2 ARM926EJS (Orion5x SoC)
-Rowel Atienza <rowel@diwalabs.com>
-
- armadillo ARM720T
-
Stefano Babic <sbabic@denx.de>
ea20 davinci
@@ -632,7 +628,6 @@ Eric Cooper <ecc@cmu.edu>
George G. Davis <gdavis@mvista.com>
- assabet SA1100
gcplus SA1100
Wolfgang Denk <wd@denx.de>
@@ -690,10 +685,6 @@ Grazvydas Ignotas <notasas@gmail.com>
omap3_pandora ARM ARMV7 (OMAP3xx SoC)
-Gary Jennejohn <garyj@denx.de>
-
- smdk2400 ARM920T
-
Matthias Kaehlcke <matthias@kaehlcke.net>
edb9301 ARM920T (EP9301)
edb9302 ARM920T (EP9302)
@@ -716,6 +707,7 @@ Minkyu Kang <mk7.kang@samsung.com>
Chander Kashyap <k.chander@samsung.com>
+ origen ARM ARMV7 (S5PC210 SoC)
SMDKV310 ARM ARMV7 (S5PC210 SoC)
Torsten Koschorrek <koschorrek@synertronixx.de>
@@ -797,7 +789,6 @@ Manikandan Pillai <mani.pillai@ti.com>
Stelian Pop <stelian.pop@leadtechdesign.com>
- at91cap9adk ARM926EJS (AT91CAP9 SoC)
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
at91sam9261ek ARM926EJS (AT91SAM9261 SoC)
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
@@ -850,10 +841,6 @@ Michael Schwingen <michael@schwingen.org>
actux4 xscale/ixp
dvlhost xscale/ixp
-Andrea Scian <andrea.scian@dave-tech.it>
-
- B2 ARM7TDMI (S3C44B0X)
-
Nick Thompson <nick.thompson@gefanuc.com>
da830evm ARM926EJS (DA830/OMAP-L137)
diff --git a/MAKEALL b/MAKEALL
index 3b98f03..e72a019 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -301,14 +301,9 @@ LIST_SA="$(boards_by_cpu sa1100)"
#########################################################################
LIST_ARM7=" \
- ap7 \
- ap720t \
- armadillo \
- B2 \
ep7312 \
evb4510 \
impa7 \
- integratorap \
lpc2292sodimm \
modnet50 \
SMN42 \
@@ -320,38 +315,17 @@ LIST_ARM7=" \
LIST_ARM9=" \
a320evb \
- ap920t \
- ap922_XA10 \
- ap926ejs \
- ap946es \
- ap966 \
aspenite \
- cp920t \
- cp922_XA10 \
- cp926ejs \
- cp946es \
- cp966 \
da830evm \
da850evm \
- edb9301 \
- edb9302 \
- edb9302a \
- edb9307 \
- edb9307a \
- edb9312 \
- edb9315 \
- edb9315a \
edminiv2 \
guruplug \
imx27lite \
jadecpu \
km_kirkwood \
- lpd7a400 \
magnesium \
mv88f6281gtw_ge \
mx1ads \
- mx1fs2 \
- netstar \
nhk8815 \
nhk8815_onenand \
omap1510inn \
@@ -364,10 +338,8 @@ LIST_ARM9=" \
openrd_ultimate \
portl2 \
rd6281a \
- sbc2410x \
scb9328 \
sheevaplug \
- smdk2400 \
smdk2410 \
spear300 \
spear310 \
@@ -377,7 +349,6 @@ LIST_ARM9=" \
versatile \
versatileab \
versatilepb \
- voiceblue \
davinci_dvevm \
davinci_schmoogie \
davinci_sffsdr \
@@ -389,18 +360,9 @@ LIST_ARM9=" \
"
#########################################################################
-## ARM10 Systems
-#########################################################################
-LIST_ARM10=" \
- integratorcp \
- cp1026 \
-"
-
-#########################################################################
## ARM11 Systems
#########################################################################
LIST_ARM11=" \
- cp1136 \
omap2420h4 \
apollon \
imx31_litekit \
@@ -417,39 +379,14 @@ LIST_ARM11=" \
#########################################################################
## ARMV7 Systems
#########################################################################
-LIST_ARMV7=" \
- am3517_crane \
- am3517_evm \
- ca9x4_ct_vxp \
- devkit8000 \
- dig297 \
- igep0020 \
- igep0030 \
- mx51evk \
- omap3_beagle \
- omap3_overo \
- omap3_evm \
- omap3_pandora \
- omap3_sdp3430 \
- omap3_zoom1 \
- omap3_zoom2 \
- omap4_panda \
- omap4_sdp4430 \
- s5p_goni \
- smdkc100 \
-"
+
+LIST_ARMV7="$(boards_by_cpu armv7)"
#########################################################################
## AT91 Systems
#########################################################################
-LIST_at91="$(boards_by_soc at91)\
- at91sam9m10g45ek \
- pm9g45 \
- SBC35_A9G20 \
- TNY_A9260 \
- TNY_A9G20 \
-"
+LIST_at91="$(boards_by_soc at91)"
#########################################################################
## Xscale Systems
diff --git a/Makefile b/Makefile
index 03d80b7..699a752 100644
--- a/Makefile
+++ b/Makefile
@@ -798,78 +798,6 @@ M5485HFE_config : unconfig
# ARM
#========================================================================
-#########################################################################
-## ARM926EJ-S Systems
-#########################################################################
-
-at91sam9m10g45ek_nandflash_config \
-at91sam9m10g45ek_dataflash_config \
-at91sam9m10g45ek_dataflash_cs0_config \
-at91sam9m10g45ek_config \
-at91sam9g45ekes_nandflash_config \
-at91sam9g45ekes_dataflash_config \
-at91sam9g45ekes_dataflash_cs0_config \
-at91sam9g45ekes_config : unconfig
- @mkdir -p $(obj)include
- @if [ "$(findstring 9m10,$@)" ] ; then \
- echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \
- fi;
- @if [ "$(findstring _nandflash,$@)" ] ; then \
- echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \
- else \
- echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \
- fi;
- @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
-
-pm9g45_config : unconfig
- @mkdir -p $(obj)include
- @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
-
-SBC35_A9G20_NANDFLASH_config \
-SBC35_A9G20_EEPROM_config \
-SBC35_A9G20_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
-
-TNY_A9G20_NANDFLASH_config \
-TNY_A9G20_EEPROM_config \
-TNY_A9G20_config \
-TNY_A9260_NANDFLASH_config \
-TNY_A9260_EEPROM_config \
-TNY_A9260_config : unconfig
- @mkdir -p $(obj)include
- @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
- @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
-
-########################################################################
-## ARM Integrator boards - see doc/README-integrator for more info.
-integratorap_config \
-ap_config \
-ap966_config \
-ap922_config \
-ap922_XA10_config \
-ap7_config \
-ap720t_config \
-ap920t_config \
-ap926ejs_config \
-ap946es_config: unconfig
- @board/armltd/integrator/split_by_variant.sh ap $@
-
-integratorcp_config \
-cp_config \
-cp920t_config \
-cp926ejs_config \
-cp946es_config \
-cp1136_config \
-cp966_config \
-cp922_config \
-cp922_XA10_config \
-cp1026_config: unconfig
- @board/armltd/integrator/split_by_variant.sh cp $@
-
xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
omap1610inn_config \
@@ -923,16 +851,6 @@ tx25_config : unconfig
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
-edb9301_config \
-edb9302_config \
-edb9302a_config \
-edb9307_config \
-edb9307a_config \
-edb9312_config \
-edb9315_config \
-edb9315a_config: unconfig
- @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx
-
#########################################################################
## XScale Systems
#########################################################################
@@ -1014,9 +932,7 @@ clean:
$(obj)tools/ncb $(obj)tools/ubsha1
@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \
$(obj)board/matrix_vision/*/bootscript.img \
- $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \
$(obj)board/voiceblue/eeprom \
- $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \
$(obj)u-boot.lds \
$(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] \
$(obj)arch/blackfin/cpu/init.{lds,elf}
diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c
index 1b4ab75..fcfaba5 100644
--- a/arch/arm/cpu/arm1136/mx35/generic.c
+++ b/arch/arm/cpu/arm1136/mx35/generic.c
@@ -417,8 +417,8 @@ int do_mx35_showclocks(cmd_tbl_t *cmdtp,
}
U_BOOT_CMD(
- clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx35_showclocks,
- "display clocks\n",
+ clocks, CONFIG_SYS_MAXARGS, 1, do_mx35_showclocks,
+ "display clocks",
""
);
diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c
index 88c71bf..ff992aa 100644
--- a/arch/arm/cpu/arm720t/cpu.c
+++ b/arch/arm/cpu/arm720t/cpu.c
@@ -82,9 +82,4 @@ static void cache_flush (void)
asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
}
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
- /* No specific cache setup for IntegratorAP/CM720T as yet */
- void icache_enable (void)
- {
- }
#endif
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
index 4ad9b1f..5ff32e3 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c
@@ -26,135 +26,131 @@
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
+#include <asm/io.h>
+
+/*
+ * if CONFIG_AT91_GPIO_PULLUP ist set, keep pullups on on all
+ * peripheral pins. Good to have if hardware is soldered optionally
+ * or in case of SPI no slave is selected. Avoid lines to float
+ * needlessly. Use a short local PUP define.
+ *
+ * Due to errata "TXD floats when CTS is inactive" pullups are always
+ * on for TXD pins.
+ */
+#ifdef CONFIG_AT91_GPIO_PULLUP
+# define PUP CONFIG_AT91_GPIO_PULLUP
+#else
+# define PUP 0
+#endif
void at91_serial0_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 19, 1); /* TXD0 */
- at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* RXD0 */
- writel(1 << AT91SAM9G45_ID_US0, &pmc->pcer);
+ at91_set_a_periph(AT91_PIO_PORTB, 18, PUP); /* RXD0 */
+ writel(1 << ATMEL_ID_USART0, &pmc->pcer);
}
void at91_serial1_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 4, 1); /* TXD1 */
- at91_set_a_periph(AT91_PIO_PORTB, 5, 0); /* RXD1 */
- writel(1 << AT91SAM9G45_ID_US1, &pmc->pcer);
+ at91_set_a_periph(AT91_PIO_PORTB, 5, PUP); /* RXD1 */
+ writel(1 << ATMEL_ID_USART1, &pmc->pcer);
}
void at91_serial2_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTD, 6, 1); /* TXD2 */
- at91_set_a_periph(AT91_PIO_PORTD, 7, 0); /* RXD2 */
- writel(1 << AT91SAM9G45_ID_US2, &pmc->pcer);
+ at91_set_a_periph(AT91_PIO_PORTD, 7, PUP); /* RXD2 */
+ writel(1 << ATMEL_ID_USART2, &pmc->pcer);
}
-void at91_serial3_hw_init(void)
+void at91_seriald_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* DRXD */
at91_set_a_periph(AT91_PIO_PORTB, 13, 1); /* DTXD */
- writel(1 << AT91_ID_SYS, &pmc->pcer);
-}
-
-void at91_serial_hw_init(void)
-{
-#ifdef CONFIG_USART0
- at91_serial0_hw_init();
-#endif
-
-#ifdef CONFIG_USART1
- at91_serial1_hw_init();
-#endif
-
-#ifdef CONFIG_USART2
- at91_serial2_hw_init();
-#endif
-
-#ifdef CONFIG_USART3 /* DBGU */
- at91_serial3_hw_init();
-#endif
+ writel(1 << ATMEL_ID_SYS, &pmc->pcer);
}
-#ifdef CONFIG_ATMEL_SPI
+#if defined(CONFIG_HAS_DATAFLASH) || defined(CONFIG_ATMEL_SPI)
void at91_spi0_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTB, 0, 0); /* SPI0_MISO */
- at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* SPI0_MOSI */
- at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* SPI0_SPCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 0, PUP); /* SPI0_MISO */
+ at91_set_a_periph(AT91_PIO_PORTB, 1, PUP); /* SPI0_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTB, 2, PUP); /* SPI0_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9G45_ID_SPI0, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI0, &pmc->pcer);
if (cs_mask & (1 << 0)) {
- at91_set_a_periph(AT91_PIO_PORTB, 3, 0);
+ at91_set_a_periph(AT91_PIO_PORTB, 3, 1);
}
if (cs_mask & (1 << 1)) {
- at91_set_b_periph(AT91_PIO_PORTB, 18, 0);
+ at91_set_b_periph(AT91_PIO_PORTB, 18, 1);
}
if (cs_mask & (1 << 2)) {
- at91_set_b_periph(AT91_PIO_PORTB, 19, 0);
+ at91_set_b_periph(AT91_PIO_PORTB, 19, 1);
}
if (cs_mask & (1 << 3)) {
- at91_set_b_periph(AT91_PIO_PORTD, 27, 0);
+ at91_set_b_periph(AT91_PIO_PORTD, 27, 1);
}
if (cs_mask & (1 << 4)) {
- at91_set_pio_output(AT91_PIO_PORTB, 3, 0);
+ at91_set_pio_output(AT91_PIO_PORTB, 3, 1);
}
if (cs_mask & (1 << 5)) {
- at91_set_pio_output(AT91_PIO_PORTB, 18, 0);
+ at91_set_pio_output(AT91_PIO_PORTB, 18, 1);
}
if (cs_mask & (1 << 6)) {
- at91_set_pio_output(AT91_PIO_PORTB, 19, 0);
+ at91_set_pio_output(AT91_PIO_PORTB, 19, 1);
}
if (cs_mask & (1 << 7)) {
- at91_set_pio_output(AT91_PIO_PORTD, 27, 0);
+ at91_set_pio_output(AT91_PIO_PORTD, 27, 1);
}
}
void at91_spi1_hw_init(unsigned long cs_mask)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- at91_set_a_periph(AT91_PIO_PORTB, 14, 0); /* SPI1_MISO */
- at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* SPI1_MOSI */
- at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* SPI1_SPCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 14, PUP); /* SPI1_MISO */
+ at91_set_a_periph(AT91_PIO_PORTB, 15, PUP); /* SPI1_MOSI */
+ at91_set_a_periph(AT91_PIO_PORTB, 16, PUP); /* SPI1_SPCK */
/* Enable clock */
- writel(1 << AT91SAM9G45_ID_SPI1, &pmc->pcer);
+ writel(1 << ATMEL_ID_SPI1, &pmc->pcer);
if (cs_mask & (1 << 0)) {
- at91_set_a_periph(AT91_PIO_PORTB, 17, 0);
+ at91_set_a_periph(AT91_PIO_PORTB, 17, 1);
}
if (cs_mask & (1 << 1)) {
- at91_set_b_periph(AT91_PIO_PORTD, 28, 0);
+ at91_set_b_periph(AT91_PIO_PORTD, 28, 1);
}
if (cs_mask & (1 << 2)) {
- at91_set_a_periph(AT91_PIO_PORTD, 18, 0);
+ at91_set_a_periph(AT91_PIO_PORTD, 18, 1);
}
if (cs_mask & (1 << 3)) {
- at91_set_a_periph(AT91_PIO_PORTD, 19, 0);
+ at91_set_a_periph(AT91_PIO_PORTD, 19, 1);
}
if (cs_mask & (1 << 4)) {
- at91_set_pio_output(AT91_PIO_PORTB, 17, 0);
+ at91_set_pio_output(AT91_PIO_PORTB, 17, 1);
}
if (cs_mask & (1 << 5)) {
- at91_set_pio_output(AT91_PIO_PORTD, 28, 0);
+ at91_set_pio_output(AT91_PIO_PORTD, 28, 1);
}
if (cs_mask & (1 << 6)) {
- at91_set_pio_output(AT91_PIO_PORTD, 18, 0);
+ at91_set_pio_output(AT91_PIO_PORTD, 18, 1);
}
if (cs_mask & (1 << 7)) {
- at91_set_pio_output(AT91_PIO_PORTD, 19, 0);
+ at91_set_pio_output(AT91_PIO_PORTD, 19, 1);
}
}
diff --git a/arch/arm/cpu/arm926ejs/davinci/cpu.c b/arch/arm/cpu/arm926ejs/davinci/cpu.c
index 8b57205..b705dfd 100644
--- a/arch/arm/cpu/arm926ejs/davinci/cpu.c
+++ b/arch/arm/cpu/arm926ejs/davinci/cpu.c
@@ -37,6 +37,7 @@
#define PLLC_PLLDIV4 0x160
#define PLLC_PLLDIV5 0x164
#define PLLC_PLLDIV6 0x168
+#define PLLC_PLLDIV7 0x16c
#define PLLC_PLLDIV8 0x170
#define PLLC_PLLDIV9 0x174
@@ -61,11 +62,9 @@
#endif
#ifdef CONFIG_SOC_DA8XX
-const dv_reg * const sysdiv[7] = {
- &davinci_pllc_regs->plldiv1, &davinci_pllc_regs->plldiv2,
- &davinci_pllc_regs->plldiv3, &davinci_pllc_regs->plldiv4,
- &davinci_pllc_regs->plldiv5, &davinci_pllc_regs->plldiv6,
- &davinci_pllc_regs->plldiv7
+unsigned int sysdiv[9] = {
+ PLLC_PLLDIV1, PLLC_PLLDIV2, PLLC_PLLDIV3, PLLC_PLLDIV4, PLLC_PLLDIV5,
+ PLLC_PLLDIV6, PLLC_PLLDIV7, PLLC_PLLDIV8, PLLC_PLLDIV9
};
int clk_get(enum davinci_clk_ids id)
@@ -74,19 +73,27 @@ int clk_get(enum davinci_clk_ids id)
int pllm;
int post_div;
int pll_out;
+ unsigned int pll_base;
pll_out = CONFIG_SYS_OSCIN_FREQ;
if (id == DAVINCI_AUXCLK_CLKID)
goto out;
+ if ((id >> 16) == 1)
+ pll_base = (unsigned int)davinci_pllc1_regs;
+ else
+ pll_base = (unsigned int)davinci_pllc0_regs;
+
+ id &= 0xFFFF;
+
/*
* Lets keep this simple. Combining operations can result in
* unexpected approximations
*/
- pre_div = (readl(&davinci_pllc_regs->prediv) &
- DAVINCI_PLLC_DIV_MASK) + 1;
- pllm = readl(&davinci_pllc_regs->pllm) + 1;
+ pre_div = (readl(pll_base + PLLC_PREDIV) &
+ DAVINCI_PLLC_DIV_MASK) + 1;
+ pllm = readl(pll_base + PLLC_PLLM) + 1;
pll_out /= pre_div;
pll_out *= pllm;
@@ -94,15 +101,16 @@ int clk_get(enum davinci_clk_ids id)
if (id == DAVINCI_PLLM_CLKID)
goto out;
- post_div = (readl(&davinci_pllc_regs->postdiv) &
- DAVINCI_PLLC_DIV_MASK) + 1;
+ post_div = (readl(pll_base + PLLC_POSTDIV) &
+ DAVINCI_PLLC_DIV_MASK) + 1;
pll_out /= post_div;
if (id == DAVINCI_PLLC_CLKID)
goto out;
- pll_out /= (readl(sysdiv[id - 1]) & DAVINCI_PLLC_DIV_MASK) + 1;
+ pll_out /= (readl(pll_base + sysdiv[id - 1]) &
+ DAVINCI_PLLC_DIV_MASK) + 1;
out:
return pll_out;
diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c
index 3e1e1bf..1b4e808 100644
--- a/arch/arm/cpu/armv7/cache_v7.c
+++ b/arch/arm/cpu/armv7/cache_v7.c
@@ -81,8 +81,8 @@ static void v7_inval_dcache_level_setway(u32 level, u32 num_sets,
: : "r" (setway));
}
}
- /* DMB to make sure the operation is complete */
- CP15DMB;
+ /* DSB to make sure the operation is complete */
+ CP15DSB;
}
static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets,
@@ -108,8 +108,8 @@ static void v7_clean_inval_dcache_level_setway(u32 level, u32 num_sets,
: : "r" (setway));
}
}
- /* DMB to make sure the operation is complete */
- CP15DMB;
+ /* DSB to make sure the operation is complete */
+ CP15DSB;
}
static void v7_maint_dcache_level_setway(u32 level, u32 operation)
@@ -181,21 +181,23 @@ static void v7_dcache_inval_range(u32 start, u32 stop, u32 line_len)
u32 mva;
/*
- * If start address is not aligned to cache-line flush the first
- * line to prevent affecting somebody else's buffer
+ * If start address is not aligned to cache-line do not
+ * invalidate the first cache-line
*/
if (start & (line_len - 1)) {
- v7_dcache_clean_inval_range(start, start + 1, line_len);
+ printf("ERROR: %s - start address is not aligned - 0x%08x\n",
+ __func__, start);
/* move to next cache line */
start = (start + line_len - 1) & ~(line_len - 1);
}
/*
- * If stop address is not aligned to cache-line flush the last
- * line to prevent affecting somebody else's buffer
+ * If stop address is not aligned to cache-line do not
+ * invalidate the last cache-line
*/
if (stop & (line_len - 1)) {
- v7_dcache_clean_inval_range(stop, stop + 1, line_len);
+ printf("ERROR: %s - stop address is not aligned - 0x%08x\n",
+ __func__, stop);
/* align to the beginning of this cache line */
stop &= ~(line_len - 1);
}
@@ -227,8 +229,8 @@ static void v7_dcache_maint_range(u32 start, u32 stop, u32 range_op)
break;
}
- /* DMB to make sure the operation is complete */
- CP15DMB;
+ /* DSB to make sure the operation is complete */
+ CP15DSB;
}
/* Invalidate TLB */
diff --git a/arch/arm/cpu/armv7/mx5/clock.c b/arch/arm/cpu/armv7/mx5/clock.c
index 0b04a88..00610a0 100644
--- a/arch/arm/cpu/armv7/mx5/clock.c
+++ b/arch/arm/cpu/armv7/mx5/clock.c
@@ -288,7 +288,7 @@ int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
/***************************************************/
U_BOOT_CMD(
- clockinfo, CONFIG_SYS_MAXARGS, 1, do_mx5_showclocks,
- "display clocks\n",
+ clocks, CONFIG_SYS_MAXARGS, 1, do_mx5_showclocks,
+ "display clocks",
""
);
diff --git a/arch/arm/cpu/armv7/mx5/lowlevel_init.S b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
index 94de9f1..6c66b42 100644
--- a/arch/arm/cpu/armv7/mx5/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/mx5/lowlevel_init.S
@@ -121,6 +121,35 @@
beq 1b
.endm
+.macro setup_pll_errata pll, freq
+ ldr r2, =\pll
+ mov r1, #0x0
+ str r1, [r2, #PLL_DP_CONFIG] /* Disable auto-restart AREN bit */
+ ldr r1, =0x00001236
+ str r1, [r2, #PLL_DP_CTL] /* Restart PLL with PLM=1 */
+1: ldr r1, [r2, #PLL_DP_CTL] /* Wait for lock */
+ ands r1, r1, #0x1
+ beq 1b
+
+ ldr r5, \freq
+ str r5, [r2, #PLL_DP_MFN] /* Modify MFN value */
+ str r5, [r2, #PLL_DP_HFS_MFN]
+
+ mov r1, #0x1
+ str r1, [r2, #PLL_DP_CONFIG] /* Reload MFN value */
+
+2: ldr r1, [r2, #PLL_DP_CONFIG]
+ tst r1, #1
+ bne 2b
+
+ ldr r1, =100 /* Wait at least 4 us */
+3: subs r1, r1, #1
+ bge 3b
+
+ mov r1, #0x2
+ str r1, [r2, #PLL_DP_CONFIG] /* Enable auto-restart AREN bit */
+.endm
+
.macro init_clock
ldr r0, =CCM_BASE_ADDR
@@ -157,7 +186,12 @@
mov r1, #0x4
str r1, [r0, #CLKCTL_CCSR]
+#if defined(CONFIG_MX51_PLL_ERRATA)
+ setup_pll PLL1_BASE_ADDR, 864
+ setup_pll_errata PLL1_BASE_ADDR, W_DP_MFN_800_DIT
+#else
setup_pll PLL1_BASE_ADDR, 800
+#endif
#if defined(CONFIG_MX51)
setup_pll PLL3_BASE_ADDR, 665
@@ -287,6 +321,10 @@ lowlevel_init:
mov pc,lr
/* Board level setting value */
+W_DP_OP_864: .word DP_OP_864
+W_DP_MFD_864: .word DP_MFD_864
+W_DP_MFN_864: .word DP_MFN_864
+W_DP_MFN_800_DIT: .word DP_MFN_800_DIT
W_DP_OP_800: .word DP_OP_800
W_DP_MFD_800: .word DP_MFD_800
W_DP_MFN_800: .word DP_MFN_800
diff --git a/arch/arm/cpu/armv7/omap-common/gpio.c b/arch/arm/cpu/armv7/omap-common/gpio.c
index f4c3479..2fcaf5a 100644
--- a/arch/arm/cpu/armv7/omap-common/gpio.c
+++ b/arch/arm/cpu/armv7/omap-common/gpio.c
@@ -36,7 +36,7 @@
* published by the Free Software Foundation.
*/
#include <common.h>
-#include <asm/omap_gpio.h>
+#include <asm/arch/gpio.h>
#include <asm/io.h>
#include <asm/errno.h>
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 4aaf97b..0448bc9 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -38,7 +38,7 @@
#include <asm/arch/mem.h>
#include <asm/cache.h>
#include <asm/armv7.h>
-#include <asm/omap_gpio.h>
+#include <asm/arch/gpio.h>
/* Declarations */
extern omap3_sysinfo sysinfo;
@@ -402,3 +402,11 @@ void v7_outer_cache_disable(void)
omap3_update_aux_cr(0, 0x2);
}
#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
diff --git a/arch/arm/cpu/armv7/omap3/clock.c b/arch/arm/cpu/armv7/omap3/clock.c
index 3d38d08..e0d65c7 100644
--- a/arch/arm/cpu/armv7/omap3/clock.c
+++ b/arch/arm/cpu/armv7/omap3/clock.c
@@ -399,7 +399,7 @@ static void dpll3_init_36xx(u32 sil_index, u32 clk_index)
/* L3 */
sr32(&prcm_base->clksel_core, 0, 2, CORE_L3_DIV);
/* GFX */
- sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV);
+ sr32(&prcm_base->clksel_gfx, 0, 3, GFX_DIV_36X);
/* RESET MGR */
sr32(&prcm_base->clksel_wkup, 1, 2, WKUP_RSM);
/* FREQSEL (CORE_DPLL_FREQSEL): CM_CLKEN_PLL[4:7] */
@@ -579,6 +579,7 @@ void prcm_init(void)
dpll3_init_36xx(0, clk_index);
dpll4_init_36xx(0, clk_index);
+ dpll5_init_34xx(0, clk_index);
iva_init_36xx(0, clk_index);
mpu_init_36xx(0, clk_index);
@@ -607,7 +608,9 @@ void prcm_init(void)
dpll3_init_34xx(sil_index, clk_index);
dpll4_init_34xx(sil_index, clk_index);
dpll5_init_34xx(sil_index, clk_index);
- iva_init_34xx(sil_index, clk_index);
+ if (get_cpu_family() != CPU_AM35XX)
+ iva_init_34xx(sil_index, clk_index);
+
mpu_init_34xx(sil_index, clk_index);
/* Lock MPU DPLL to set frequency */
@@ -674,7 +677,9 @@ void per_clocks_enable(void)
/* Enable the ICLK for 32K Sync Timer as its used in udelay */
sr32(&prcm_base->iclken_wkup, 2, 1, 0x1);
- sr32(&prcm_base->fclken_iva2, 0, 32, FCK_IVA2_ON);
+ if (get_cpu_family() != CPU_AM35XX)
+ sr32(&prcm_base->fclken_iva2, 0, 32, FCK_IVA2_ON);
+
sr32(&prcm_base->fclken1_core, 0, 32, FCK_CORE1_ON);
sr32(&prcm_base->iclken1_core, 0, 32, ICK_CORE1_ON);
sr32(&prcm_base->iclken2_core, 0, 32, ICK_CORE2_ON);
@@ -682,8 +687,10 @@ void per_clocks_enable(void)
sr32(&prcm_base->iclken_wkup, 0, 32, ICK_WKUP_ON);
sr32(&prcm_base->fclken_dss, 0, 32, FCK_DSS_ON);
sr32(&prcm_base->iclken_dss, 0, 32, ICK_DSS_ON);
- sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON);
- sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON);
+ if (get_cpu_family() != CPU_AM35XX) {
+ sr32(&prcm_base->fclken_cam, 0, 32, FCK_CAM_ON);
+ sr32(&prcm_base->iclken_cam, 0, 32, ICK_CAM_ON);
+ }
sr32(&prcm_base->fclken_per, 0, 32, FCK_PER_ON);
sr32(&prcm_base->iclken_per, 0, 32, ICK_PER_ON);
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 5943d61..69a0ce5 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -33,7 +33,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/sizes.h>
#include <asm/arch/emif.h>
-#include <asm/omap_gpio.h>
+#include <asm/arch/gpio.h>
#include "omap4_mux_data.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -299,3 +299,11 @@ void v7_outer_cache_disable(void)
set_pl310_ctrl_reg(0);
}
#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
diff --git a/arch/arm/cpu/armv7/tegra2/Makefile b/arch/arm/cpu/armv7/tegra2/Makefile
index f1ea915..f673f03 100644
--- a/arch/arm/cpu/armv7/tegra2/Makefile
+++ b/arch/arm/cpu/armv7/tegra2/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
SOBJS := lowlevel_init.o
-COBJS := ap20.o board.o sys_info.o timer.o
+COBJS := ap20.o board.o clock.o pinmux.o sys_info.o timer.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/tegra2/ap20.c b/arch/arm/cpu/armv7/tegra2/ap20.c
index 60dd5df..dc5f984 100644
--- a/arch/arm/cpu/armv7/tegra2/ap20.c
+++ b/arch/arm/cpu/armv7/tegra2/ap20.c
@@ -25,6 +25,7 @@
#include <asm/io.h>
#include <asm/arch/tegra2.h>
#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
#include <asm/arch/pmc.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/scu.h>
@@ -35,33 +36,32 @@ u32 s_first_boot = 1;
void init_pllx(void)
{
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ struct clk_pll *pll = &clkrst->crc_pll[CLOCK_PLL_ID_XCPU];
u32 reg;
/* If PLLX is already enabled, just return */
- reg = readl(&clkrst->crc_pllx_base);
- if (reg & PLL_ENABLE)
+ if (readl(&pll->pll_base) & PLL_ENABLE_MASK)
return;
/* Set PLLX_MISC */
- reg = CPCON; /* CPCON[11:8] = 0001 */
- writel(reg, &clkrst->crc_pllx_misc);
+ writel(1 << PLL_CPCON_SHIFT, &pll->pll_misc);
/* Use 12MHz clock here */
- reg = (PLL_BYPASS | PLL_DIVM);
- reg |= (1000 << 8); /* DIVN = 0x3E8 */
- writel(reg, &clkrst->crc_pllx_base);
+ reg = PLL_BYPASS_MASK | (12 << PLL_DIVM_SHIFT);
+ reg |= 1000 << PLL_DIVN_SHIFT;
+ writel(reg, &pll->pll_base);
- reg |= PLL_ENABLE;
- writel(reg, &clkrst->crc_pllx_base);
+ reg |= PLL_ENABLE_MASK;
+ writel(reg, &pll->pll_base);
- reg &= ~PLL_BYPASS;
- writel(reg, &clkrst->crc_pllx_base);
+ reg &= ~PLL_BYPASS_MASK;
+ writel(reg, &pll->pll_base);
}
static void enable_cpu_clock(int enable)
{
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 reg, clk;
+ u32 clk;
/*
* NOTE:
@@ -83,27 +83,19 @@ static void enable_cpu_clock(int enable)
writel(SUPER_CCLK_DIVIDER, &clkrst->crc_super_cclk_div);
}
- /* Fetch the register containing the main CPU complex clock enable */
- reg = readl(&clkrst->crc_clk_out_enb_l);
- reg |= CLK_ENB_CPU;
-
/*
* Read the register containing the individual CPU clock enables and
* always stop the clock to CPU 1.
*/
clk = readl(&clkrst->crc_clk_cpu_cmplx);
- clk |= CPU1_CLK_STP;
-
- if (enable) {
- /* Unstop the CPU clock */
- clk &= ~CPU0_CLK_STP;
- } else {
- /* Stop the CPU clock */
- clk |= CPU0_CLK_STP;
- }
+ clk |= 1 << CPU1_CLK_STP_SHIFT;
+ /* Stop/Unstop the CPU clock */
+ clk &= ~CPU0_CLK_STP_MASK;
+ clk |= !enable << CPU0_CLK_STP_SHIFT;
writel(clk, &clkrst->crc_clk_cpu_cmplx);
- writel(reg, &clkrst->crc_clk_out_enb_l);
+
+ clock_enable(PERIPH_ID_CPU);
}
static int is_cpu_powered(void)
@@ -178,9 +170,6 @@ static void enable_cpu_power_rail(void)
static void reset_A9_cpu(int reset)
{
- struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 reg, cpu;
-
/*
* NOTE: Regardless of whether the request is to hold the CPU in reset
* or take it out of reset, every processor in the CPU complex
@@ -189,48 +178,22 @@ static void reset_A9_cpu(int reset)
* are multiple processors in the CPU complex.
*/
- /* Hold CPU 1 in reset */
- cpu = SET_DBGRESET1 | SET_DERESET1 | SET_CPURESET1;
- writel(cpu, &clkrst->crc_cpu_cmplx_set);
-
- reg = readl(&clkrst->crc_rst_dev_l);
- if (reset) {
- /* Now place CPU0 into reset */
- cpu |= SET_DBGRESET0 | SET_DERESET0 | SET_CPURESET0;
- writel(cpu, &clkrst->crc_cpu_cmplx_set);
-
- /* Enable master CPU reset */
- reg |= SWR_CPU_RST;
- } else {
- /* Take CPU0 out of reset */
- cpu = CLR_DBGRESET0 | CLR_DERESET0 | CLR_CPURESET0;
- writel(cpu, &clkrst->crc_cpu_cmplx_clr);
-
- /* Disable master CPU reset */
- reg &= ~SWR_CPU_RST;
- }
+ /* Hold CPU 1 in reset, and CPU 0 if asked */
+ reset_cmplx_set_enable(1, crc_rst_cpu | crc_rst_de | crc_rst_debug, 1);
+ reset_cmplx_set_enable(0, crc_rst_cpu | crc_rst_de | crc_rst_debug,
+ reset);
- writel(reg, &clkrst->crc_rst_dev_l);
+ /* Enable/Disable master CPU reset */
+ reset_set_enable(PERIPH_ID_CPU, reset);
}
static void clock_enable_coresight(int enable)
{
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
- u32 rst, clk, src;
-
- rst = readl(&clkrst->crc_rst_dev_u);
- clk = readl(&clkrst->crc_clk_out_enb_u);
-
- if (enable) {
- rst &= ~SWR_CSITE_RST;
- clk |= CLK_ENB_CSITE;
- } else {
- rst |= SWR_CSITE_RST;
- clk &= ~CLK_ENB_CSITE;
- }
+ u32 rst, src;
- writel(clk, &clkrst->crc_clk_out_enb_u);
- writel(rst, &clkrst->crc_rst_dev_u);
+ clock_set_enable(PERIPH_ID_CORESIGHT, enable);
+ reset_set_enable(PERIPH_ID_CORESIGHT, !enable);
if (enable) {
/*
diff --git a/arch/arm/cpu/armv7/tegra2/clock.c b/arch/arm/cpu/armv7/tegra2/clock.c
new file mode 100644
index 0000000..67eed14
--- /dev/null
+++ b/arch/arm/cpu/armv7/tegra2/clock.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra2 Clock control functions */
+
+#include <asm/io.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/timer.h>
+#include <asm/arch/tegra2.h>
+#include <common.h>
+
+#ifdef DEBUG
+#define assert(x) \
+ ({ if (!(x)) printf("Assertion failure '%s' %s line %d\n", \
+ #x, __FILE__, __LINE__); })
+#else
+#define assert(x)
+#endif
+
+/*
+ * Get the oscillator frequency, from the corresponding hardware configuration
+ * field.
+ */
+enum clock_osc_freq clock_get_osc_freq(void)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 reg;
+
+ reg = readl(&clkrst->crc_osc_ctrl);
+ return (reg & OSC_FREQ_MASK) >> OSC_FREQ_SHIFT;
+}
+
+unsigned long clock_start_pll(enum clock_pll_id clkid, u32 divm, u32 divn,
+ u32 divp, u32 cpcon, u32 lfcon)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 data;
+ struct clk_pll *pll;
+
+ assert(clock_pll_id_isvalid(clkid));
+ pll = &clkrst->crc_pll[clkid];
+
+ /*
+ * We cheat by treating all PLL (except PLLU) in the same fashion.
+ * This works only because:
+ * - same fields are always mapped at same offsets, except DCCON
+ * - DCCON is always 0, doesn't conflict
+ * - M,N, P of PLLP values are ignored for PLLP
+ */
+ data = (cpcon << PLL_CPCON_SHIFT) | (lfcon << PLL_LFCON_SHIFT);
+ writel(data, &pll->pll_misc);
+
+ data = (divm << PLL_DIVM_SHIFT) | (divn << PLL_DIVN_SHIFT) |
+ (0 << PLL_BYPASS_SHIFT) | (1 << PLL_ENABLE_SHIFT);
+
+ if (clkid == CLOCK_PLL_ID_USB)
+ data |= divp << PLLU_VCO_FREQ_SHIFT;
+ else
+ data |= divp << PLL_DIVP_SHIFT;
+ writel(data, &pll->pll_base);
+
+ /* calculate the stable time */
+ return timer_get_us() + CLOCK_PLL_STABLE_DELAY_US;
+}
+
+void clock_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *clk = &clkrst->crc_clk_out_enb[PERIPH_REG(periph_id)];
+ u32 reg;
+
+ /* Enable/disable the clock to this peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ reg = readl(clk);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, clk);
+}
+
+void clock_enable(enum periph_id clkid)
+{
+ clock_set_enable(clkid, 1);
+}
+
+void clock_disable(enum periph_id clkid)
+{
+ clock_set_enable(clkid, 0);
+}
+
+void reset_set_enable(enum periph_id periph_id, int enable)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 *reset = &clkrst->crc_rst_dev[PERIPH_REG(periph_id)];
+ u32 reg;
+
+ /* Enable/disable reset to the peripheral */
+ assert(clock_periph_id_isvalid(periph_id));
+ reg = readl(reset);
+ if (enable)
+ reg |= PERIPH_MASK(periph_id);
+ else
+ reg &= ~PERIPH_MASK(periph_id);
+ writel(reg, reset);
+}
+
+void reset_periph(enum periph_id periph_id, int us_delay)
+{
+ /* Put peripheral into reset */
+ reset_set_enable(periph_id, 1);
+ udelay(us_delay);
+
+ /* Remove reset */
+ reset_set_enable(periph_id, 0);
+
+ udelay(us_delay);
+}
+
+void reset_cmplx_set_enable(int cpu, int which, int reset)
+{
+ struct clk_rst_ctlr *clkrst =
+ (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ u32 mask;
+
+ /* Form the mask, which depends on the cpu chosen. Tegra2 has 2 */
+ assert(cpu >= 0 && cpu < 2);
+ mask = which << cpu;
+
+ /* either enable or disable those reset for that CPU */
+ if (reset)
+ writel(mask, &clkrst->crc_cpu_cmplx_set);
+ else
+ writel(mask, &clkrst->crc_cpu_cmplx_clr);
+}
diff --git a/board/atmel/at91cap9adk/led.c b/arch/arm/cpu/armv7/tegra2/pinmux.c
index 14aea99..5594ab8 100644
--- a/board/atmel/at91cap9adk/led.c
+++ b/arch/arm/cpu/armv7/tegra2/pinmux.c
@@ -1,8 +1,5 @@
/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
+ * Copyright (c) 2011 The Chromium OS Authors.
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -22,22 +19,34 @@
* MA 02111-1307 USA
*/
+/* Tegra2 pin multiplexing functions */
+
+#include <asm/io.h>
+#include <asm/arch/tegra2.h>
+#include <asm/arch/pinmux.h>
#include <common.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-void coloured_LED_init(void)
+
+void pinmux_set_tristate(enum pmux_pin pin, int enable)
{
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
+ struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
+ u32 *tri = &pmt->pmt_tri[TRISTATE_REG(pin)];
+ u32 reg;
+
+ reg = readl(tri);
+ if (enable)
+ reg |= TRISTATE_MASK(pin);
+ else
+ reg &= ~TRISTATE_MASK(pin);
+ writel(reg, tri);
+}
- at91_set_gpio_output(CONFIG_RED_LED, 1);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
+void pinmux_tristate_enable(enum pmux_pin pin)
+{
+ pinmux_set_tristate(pin, 1);
+}
- at91_set_gpio_output(CONFIG_RED_LED, 0);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
+void pinmux_tristate_disable(enum pmux_pin pin)
+{
+ pinmux_set_tristate(pin, 0);
}
diff --git a/arch/arm/cpu/armv7/tegra2/timer.c b/arch/arm/cpu/armv7/tegra2/timer.c
index 0b9fa64..b12b12c 100644
--- a/arch/arm/cpu/armv7/tegra2/timer.c
+++ b/arch/arm/cpu/armv7/tegra2/timer.c
@@ -38,13 +38,12 @@
#include <common.h>
#include <asm/io.h>
#include <asm/arch/tegra2.h>
+#include <asm/arch/timer.h>
DECLARE_GLOBAL_DATA_PTR;
-struct timerus *timer_base = (struct timerus *)NV_PA_TMRUS_BASE;
-
/* counter runs at 1MHz */
-#define TIMER_CLK (1000000)
+#define TIMER_CLK 1000000
#define TIMER_LOAD_VAL 0xffffffff
/* timer without interrupts */
@@ -57,10 +56,10 @@ ulong get_timer(ulong base)
void __udelay(unsigned long usec)
{
long tmo = usec * (TIMER_CLK / 1000) / 1000;
- unsigned long now, last = readl(&timer_base->cntr_1us);
+ unsigned long now, last = timer_get_us();
while (tmo > 0) {
- now = readl(&timer_base->cntr_1us);
+ now = timer_get_us();
if (last > now) /* count up timer overflow */
tmo -= TIMER_LOAD_VAL - last + now;
else
@@ -74,7 +73,7 @@ ulong get_timer_masked(void)
ulong now;
/* current tick value */
- now = readl(&timer_base->cntr_1us) / (TIMER_CLK / CONFIG_SYS_HZ);
+ now = timer_get_us() / (TIMER_CLK / CONFIG_SYS_HZ);
if (now >= gd->lastinc) /* normal mode (non roll) */
/* move stamp forward with absolute diff ticks */
@@ -103,3 +102,10 @@ ulong get_tbclk(void)
{
return CONFIG_SYS_HZ;
}
+
+unsigned long timer_get_us(void)
+{
+ struct timerus *timer_base = (struct timerus *)NV_PA_TMRUS_BASE;
+
+ return readl(&timer_base->cntr_1us);
+}
diff --git a/arch/arm/include/asm/arch-at91/at91sam9g45.h b/arch/arm/include/asm/arch-at91/at91sam9g45.h
index 364b86c..1aeedc0 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9g45.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9g45.h
@@ -129,10 +129,24 @@
#define ATMEL_BASE_VDEC 0x00900000 /* Video Decoder Controller */
/*
+ * External memory
+ */
+#define ATMEL_BASE_CS0 0x10000000
+#define ATMEL_BASE_CS1 0x20000000
+#define ATMEL_BASE_CS2 0x30000000
+#define ATMEL_BASE_CS3 0x40000000
+#define ATMEL_BASE_CS4 0x50000000
+#define ATMEL_BASE_CS5 0x60000000
+#define ATMEL_BASE_CS6 0x70000000
+#define ATMEL_BASE_CS7 0x80000000
+
+/*
* Other misc defines
*/
#define ATMEL_PIO_PORTS 5 /* this SoCs has 5 PIO */
-
+#define ATMEL_BASE_PIO ATMEL_BASE_PIOA
+#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
+#define ATMEL_ID_UHP ATMEL_ID_UHPHS
/*
* Cpu Name
*/
diff --git a/arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h b/arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h
index 1620e1b..01c9c63 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9g45_matrix.h
@@ -15,139 +15,81 @@
#ifndef AT91SAM9G45_MATRIX_H
#define AT91SAM9G45_MATRIX_H
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-#define AT91_MATRIX_MCFG6 (AT91_MATRIX + 0x18) /* Master Configuration Register 6 */
-#define AT91_MATRIX_MCFG7 (AT91_MATRIX + 0x1C) /* Master Configuration Register 7 */
-#define AT91_MATRIX_MCFG8 (AT91_MATRIX + 0x20) /* Master Configuration Register 8 */
-#define AT91_MATRIX_MCFG9 (AT91_MATRIX + 0x24) /* Master Configuration Register 9 */
-#define AT91_MATRIX_MCFG10 (AT91_MATRIX + 0x28) /* Master Configuration Register 10 */
-#define AT91_MATRIX_MCFG11 (AT91_MATRIX + 0x2C) /* Master Configuration Register 11 */
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
-#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
-#define AT91_MATRIX_ULBT_128 (7 << 0)
+#ifndef __ASSEMBLY__
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SCFG5 (AT91_MATRIX + 0x54) /* Slave Configuration Register 5 */
-#define AT91_MATRIX_SCFG6 (AT91_MATRIX + 0x58) /* Slave Configuration Register 6 */
-#define AT91_MATRIX_SCFG7 (AT91_MATRIX + 0x5C) /* Slave Configuration Register 7 */
-#define AT91_MATRIX_SLOT_CYCLE (0x1ff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0xf << 18) /* Fixed Index of Default Master */
+struct at91_matrix {
+ u32 mcfg[16];
+ u32 scfg[16];
+ u32 pras[16][2];
+ u32 mrcr; /* 0x100 Master Remap Control */
+ u32 filler[3];
+ u32 tcmr;
+ u32 filler2;
+ u32 ddrmpr;
+ u32 filler3[3];
+ u32 ebicsa;
+ u32 filler4[47];
+ u32 wpmr;
+ u32 wpsr;
+};
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRBS0 (AT91_MATRIX + 0x84) /* Priority Register B for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRBS1 (AT91_MATRIX + 0x8C) /* Priority Register B for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRBS2 (AT91_MATRIX + 0x94) /* Priority Register B for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRBS3 (AT91_MATRIX + 0x9C) /* Priority Register B for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-#define AT91_MATRIX_PRBS4 (AT91_MATRIX + 0xA4) /* Priority Register B for Slave 4 */
-#define AT91_MATRIX_PRAS5 (AT91_MATRIX + 0xA8) /* Priority Register A for Slave 5 */
-#define AT91_MATRIX_PRBS5 (AT91_MATRIX + 0xAC) /* Priority Register B for Slave 5 */
-#define AT91_MATRIX_PRAS6 (AT91_MATRIX + 0xB0) /* Priority Register A for Slave 6 */
-#define AT91_MATRIX_PRBS6 (AT91_MATRIX + 0xB4) /* Priority Register B for Slave 6 */
-#define AT91_MATRIX_PRAS7 (AT91_MATRIX + 0xB8) /* Priority Register A for Slave 7 */
-#define AT91_MATRIX_PRBS7 (AT91_MATRIX + 0xBC) /* Priority Register B for Slave 7 */
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-#define AT91_MATRIX_M7PR (3 << 28) /* Master 7 Priority */
-#define AT91_MATRIX_M8PR (3 << 0) /* Master 8 Priority (in Register B) */
-#define AT91_MATRIX_M9PR (3 << 4) /* Master 9 Priority (in Register B) */
-#define AT91_MATRIX_M10PR (3 << 8) /* Master 10 Priority (in Register B) */
-#define AT91_MATRIX_M11PR (3 << 12) /* Master 11 Priority (in Register B) */
+#endif /* __ASSEMBLY__ */
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-#define AT91_MATRIX_RCB2 (1 << 2)
-#define AT91_MATRIX_RCB3 (1 << 3)
-#define AT91_MATRIX_RCB4 (1 << 4)
-#define AT91_MATRIX_RCB5 (1 << 5)
-#define AT91_MATRIX_RCB6 (1 << 6)
-#define AT91_MATRIX_RCB7 (1 << 7)
-#define AT91_MATRIX_RCB8 (1 << 8)
-#define AT91_MATRIX_RCB9 (1 << 9)
-#define AT91_MATRIX_RCB10 (1 << 10)
-#define AT91_MATRIX_RCB11 (1 << 11)
+#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
+#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
+#define AT91_MATRIX_ULBT_FOUR (2 << 0)
+#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
+#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
+#define AT91_MATRIX_ULBT_THIRTYTWO (5 << 0)
+#define AT91_MATRIX_ULBT_SIXTYFOUR (6 << 0)
+#define AT91_MATRIX_ULBT_128 (7 << 0)
-#define AT91_MATRIX_TCMR (AT91_MATRIX + 0x110) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-#define AT91_MATRIX_DTCM_64 (7 << 4)
-#define AT91_MATRIX_TCM_NWS (0x1 << 11) /* Wait state TCM register */
-#define AT91_MATRIX_TCM_NO_WS (0x0 << 11)
-#define AT91_MATRIX_TCM_ONE_WS (0x1 << 11)
+#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
+#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
+#define AT91_MATRIX_FIXED_DEFMSTR_SHIFT 18
-#define AT91_MATRIX_VIDEO (AT91_MATRIX + 0x118) /* Video Mode Configuration Register */
-#define AT91C_VDEC_SEL (0x1 << 0) /* Video Mode Selection */
-#define AT91C_VDEC_SEL_OFF (0 << 0)
-#define AT91C_VDEC_SEL_ON (1 << 0)
+#define AT91_MATRIX_M0PR_SHIFT 0
+#define AT91_MATRIX_M1PR_SHIFT 4
+#define AT91_MATRIX_M2PR_SHIFT 8
+#define AT91_MATRIX_M3PR_SHIFT 12
+#define AT91_MATRIX_M4PR_SHIFT 16
+#define AT91_MATRIX_M5PR_SHIFT 20
+#define AT91_MATRIX_M6PR_SHIFT 24
+#define AT91_MATRIX_M7PR_SHIFT 28
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x128) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_EBI_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_EBI_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4)
-#define AT91_MATRIX_EBI_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5)
-#define AT91_MATRIX_EBI_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
-#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
-#define AT91_MATRIX_EBI_VDDIOMSEL (1 << 16) /* Memory voltage selection */
-#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
-#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
-#define AT91_MATRIX_EBI_EBI_IOSR (1 << 17) /* EBI I/O slew rate selection */
-#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
-#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
-#define AT91_MATRIX_EBI_DDR_IOSR (1 << 18) /* DDR2 dedicated port I/O slew rate selection */
-#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
-#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
+#define AT91_MATRIX_M8PR_SHIFT 0 /* register B */
+#define AT91_MATRIX_M9PR_SHIFT 4 /* register B */
+#define AT91_MATRIX_M10PR_SHIFT 8 /* register B */
+#define AT91_MATRIX_M11PR_SHIFT 12 /* register B */
-#define AT91_MATRIX_WPMR (AT91_MATRIX + 0x1E4) /* Write Protect Mode Register */
-#define AT91_MATRIX_WPMR_WPEN (1 << 0) /* Write Protect ENable */
-#define AT91_MATRIX_WPMR_WP_WPDIS (0 << 0)
-#define AT91_MATRIX_WPMR_WP_WPEN (1 << 0)
-#define AT91_MATRIX_WPMR_WPKEY (0xFFFFFF << 8) /* Write Protect KEY */
+#define AT91_MATRIX_RCB0 (1 << 0)
+#define AT91_MATRIX_RCB1 (1 << 1)
+#define AT91_MATRIX_RCB2 (1 << 2)
+#define AT91_MATRIX_RCB3 (1 << 3)
+#define AT91_MATRIX_RCB4 (1 << 4)
+#define AT91_MATRIX_RCB5 (1 << 5)
+#define AT91_MATRIX_RCB6 (1 << 6)
+#define AT91_MATRIX_RCB7 (1 << 7)
+#define AT91_MATRIX_RCB8 (1 << 8)
+#define AT91_MATRIX_RCB9 (1 << 9)
+#define AT91_MATRIX_RCB10 (1 << 10)
-#define AT91_MATRIX_WPSR (AT91_MATRIX + 0x1E8) /* Write Protect Status Register */
-#define AT91_MATRIX_WPSR_WPVS (1 << 0) /* Write Protect Violation Status */
-#define AT91_MATRIX_WPSR_NO_WPV (0 << 0)
-#define AT91_MATRIX_WPSR_WPV (1 << 0)
-#define AT91_MATRIX_WPSR_WPVSRC (0xFFFF << 8) /* Write Protect Violation Source */
+#define AT91_MATRIX_EBI_CS1A_SMC (0 << 1)
+#define AT91_MATRIX_EBI_CS1A_SDRAMC (1 << 1)
+#define AT91_MATRIX_EBI_CS3A_SMC (0 << 3)
+#define AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA (1 << 3)
+#define AT91_MATRIX_EBI_CS4A_SMC (0 << 4)
+#define AT91_MATRIX_EBI_CS4A_SMC_CF0 (1 << 4)
+#define AT91_MATRIX_EBI_CS5A_SMC (0 << 5)
+#define AT91_MATRIX_EBI_CS5A_SMC_CF1 (1 << 5)
+#define AT91_MATRIX_EBI_DBPU_ON (0 << 8)
+#define AT91_MATRIX_EBI_DBPU_OFF (1 << 8)
+#define AT91_MATRIX_EBI_VDDIOMSEL_1_8V (0 << 16)
+#define AT91_MATRIX_EBI_VDDIOMSEL_3_3V (1 << 16)
+#define AT91_MATRIX_EBI_EBI_IOSR_REDUCED (0 << 17)
+#define AT91_MATRIX_EBI_EBI_IOSR_NORMAL (1 << 17)
+#define AT91_MATRIX_EBI_DDR_IOSR_REDUCED (0 << 18)
+#define AT91_MATRIX_EBI_DDR_IOSR_NORMAL (1 << 18)
#endif
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index f537c4b..692d507 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -129,6 +129,7 @@ typedef volatile unsigned int * dv_reg_p;
#define DAVINCI_TIMER1_BASE 0x01c21000
#define DAVINCI_WDOG_BASE 0x01c21000
#define DAVINCI_PLL_CNTRL0_BASE 0x01c11000
+#define DAVINCI_PLL_CNTRL1_BASE 0x01e1a000
#define DAVINCI_PSC0_BASE 0x01c10000
#define DAVINCI_PSC1_BASE 0x01e27000
#define DAVINCI_SPI0_BASE 0x01c41000
@@ -152,8 +153,16 @@ typedef volatile unsigned int * dv_reg_p;
#define DAVINCI_DDR_EMIF_DATA_BASE 0xc0000000
#define DAVINCI_INTC_BASE 0xfffee000
#define DAVINCI_BOOTCFG_BASE 0x01c14000
+#define DAVINCI_L3CBARAM_BASE 0x80000000
#define JTAG_ID_REG (DAVINCI_BOOTCFG_BASE + 0x18)
-
+#define CHIP_REV_ID_REG (DAVINCI_BOOTCFG_BASE + 0x24)
+#define HOST1CFG (DAVINCI_BOOTCFG_BASE + 0x44)
+#define PSC0_MDCTL (DAVINCI_PSC0_BASE + 0xa00)
+
+#define GPIO_BANK0_REG_DIR_ADDR (DAVINCI_GPIO_BASE + 0x10)
+#define GPIO_BANK0_REG_OPDATA_ADDR (DAVINCI_GPIO_BASE + 0x14)
+#define GPIO_BANK0_REG_SET_ADDR (DAVINCI_GPIO_BASE + 0x18)
+#define GPIO_BANK0_REG_CLR_ADDR (DAVINCI_GPIO_BASE + 0x1c)
#define GPIO_BANK2_REG_DIR_ADDR (DAVINCI_GPIO_BASE + 0x38)
#define GPIO_BANK2_REG_OPDATA_ADDR (DAVINCI_GPIO_BASE + 0x3c)
#define GPIO_BANK2_REG_SET_ADDR (DAVINCI_GPIO_BASE + 0x40)
@@ -387,7 +396,8 @@ struct davinci_pllc_regs {
dv_reg emucnt1;
};
-#define davinci_pllc_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL0_BASE)
+#define davinci_pllc0_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL0_BASE)
+#define davinci_pllc1_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL1_BASE)
#define DAVINCI_PLLC_DIV_MASK 0x1f
#define ASYNC3 get_async3_src()
diff --git a/include/mxc_gpio.h b/arch/arm/include/asm/arch-mx25/gpio.h
index f673dce..dc6edc7 100644
--- a/include/mxc_gpio.h
+++ b/arch/arm/include/asm/arch-mx25/gpio.h
@@ -1,6 +1,6 @@
/*
- *
- * (c) 2007 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -21,37 +21,25 @@
* MA 02111-1307 USA
*/
-#ifndef __MXC_GPIO_H
-#define __MXC_GPIO_H
+
+#ifndef __ASM_ARCH_MX25_GPIO_H
+#define __ASM_ARCH_MX25_GPIO_H
/* Converts a GPIO port number and the internal bit position
* to the GPIO number
*/
#define MXC_GPIO_PORT_TO_NUM(port, bit) (((port - 1) << 5) + (bit & 0x1f))
-enum mxc_gpio_direction {
- MXC_GPIO_DIRECTION_IN,
- MXC_GPIO_DIRECTION_OUT,
+/* GPIO registers */
+struct gpio_regs {
+ u32 gpio_dr; /* data */
+ u32 gpio_dir; /* direction */
+ u32 psr; /* pad satus */
+ u32 icr1; /* interrupt config 1 */
+ u32 icr2; /* interrupt config 2 */
+ u32 imr; /* interrupt mask */
+ u32 isr; /* interrupt status */
+ u32 edge_sel; /* edge select */
};
-#ifdef CONFIG_MXC_GPIO
-extern int mxc_gpio_direction(unsigned int gpio,
- enum mxc_gpio_direction direction);
-extern void mxc_gpio_set(unsigned int gpio, unsigned int value);
-extern int mxc_gpio_get(unsigned int gpio);
-#else
-static inline int mxc_gpio_direction(unsigned int gpio,
- enum mxc_gpio_direction direction)
-{
- return 1;
-}
-static inline int mxc_gpio_get(unsigned int gpio)
-{
- return 1;
-}
-static inline void mxc_gpio_set(unsigned int gpio, unsigned int value)
-{
-}
-#endif
-
#endif
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index 2ccb445..9e30f7c 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -84,18 +84,6 @@ struct esdramc_regs {
u32 cdlyl; /* delay line cycle length debug */
};
-/* GPIO registers */
-struct gpio_regs {
- u32 gpio_dr; /* data */
- u32 gpio_dir; /* direction */
- u32 psr; /* pad satus */
- u32 icr1; /* interrupt config 1 */
- u32 icr2; /* interrupt config 2 */
- u32 imr; /* interrupt mask */
- u32 isr; /* interrupt status */
- u32 edge_sel; /* edge select */
-};
-
/* General Purpose Timer (GPT) registers */
struct gpt_regs {
u32 ctrl; /* control */
diff --git a/arch/arm/include/asm/arch-mx31/clock.h b/arch/arm/include/asm/arch-mx31/clock.h
index fb035c4..b132676 100644
--- a/arch/arm/include/asm/arch-mx31/clock.h
+++ b/arch/arm/include/asm/arch-mx31/clock.h
@@ -32,7 +32,7 @@ enum mxc_clock {
};
unsigned int mxc_get_clock(enum mxc_clock clk);
-extern u32 imx_get_uartclk();
+extern u32 imx_get_uartclk(void);
extern void mx31_gpio_mux(unsigned long mode);
extern void mx31_set_pad(enum iomux_pins pin, u32 config);
diff --git a/board/edb93xx/early_udelay.h b/arch/arm/include/asm/arch-mx31/gpio.h
index 185283d..95b73bf 100644
--- a/board/edb93xx/early_udelay.h
+++ b/arch/arm/include/asm/arch-mx31/gpio.h
@@ -1,5 +1,6 @@
/*
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -20,15 +21,15 @@
* MA 02111-1307 USA
*/
-#include <common.h>
-/* delay execution before timers are initialized */
-static inline void early_udelay(uint32_t usecs)
-{
- /* loop takes 4 cycles at 5.0ns (fastest case, running at 200MHz) */
- register uint32_t loops = usecs * (1000 / 20);
+#ifndef __ASM_ARCH_MX31_GPIO_H
+#define __ASM_ARCH_MX31_GPIO_H
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
+/* GPIO Registers */
+struct gpio_regs {
+ u32 gpio_dr;
+ u32 gpio_dir;
+ u32 gpio_psr;
+};
+
+#endif
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index 3c8d607..2064870 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -57,13 +57,6 @@ struct clock_control_regs {
u32 pdr2;
};
-/* GPIO Registers */
-struct gpio_regs {
- u32 gpio_dr;
- u32 gpio_dir;
- u32 gpio_psr;
-};
-
struct cspi_regs {
u32 rxdata;
u32 txdata;
diff --git a/board/atmel/at91cap9adk/partition.c b/arch/arm/include/asm/arch-mx35/gpio.h
index 7e1d46f..7bcc3e8 100644
--- a/board/atmel/at91cap9adk/partition.c
+++ b/arch/arm/include/asm/arch-mx35/gpio.h
@@ -1,6 +1,9 @@
/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -16,24 +19,22 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
- *
*/
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
-};
+#ifndef __ASM_ARCH_MX35_GPIO_H
+#define __ASM_ARCH_MX35_GPIO_H
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
- {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
- {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
+/* GPIO registers */
+struct gpio_regs {
+ u32 gpio_dr; /* data */
+ u32 gpio_dir; /* direction */
+ u32 psr; /* pad satus */
+ u32 icr1; /* interrupt config 1 */
+ u32 icr2; /* interrupt config 2 */
+ u32 imr; /* interrupt mask */
+ u32 isr; /* interrupt status */
+ u32 edge_sel; /* edge select */
};
+
+#endif
diff --git a/arch/arm/include/asm/arch-mx5/gpio.h b/arch/arm/include/asm/arch-mx5/gpio.h
new file mode 100644
index 0000000..1dc34e9
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx5/gpio.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#ifndef __ASM_ARCH_MX5_GPIO_H
+#define __ASM_ARCH_MX5_GPIO_H
+
+/* GPIO registers */
+struct gpio_regs {
+ u32 gpio_dr;
+ u32 gpio_dir;
+ u32 gpio_psr;
+};
+
+#endif
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index e83ca29..a4e680b 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -235,6 +235,11 @@
/* Assuming 24MHz input clock with doubler ON */
/* MFI PDF */
+#define DP_OP_864 ((8 << 4) + ((1 - 1) << 0))
+#define DP_MFD_864 (180 - 1) /* PL Dither mode */
+#define DP_MFN_864 180
+#define DP_MFN_800_DIT 60 /* PL Dither mode */
+
#define DP_OP_850 ((8 << 4) + ((1 - 1) << 0))
#define DP_MFD_850 (48 - 1)
#define DP_MFN_850 41
@@ -404,13 +409,6 @@ struct iomuxc {
};
#endif
-/* GPIO Registers */
-struct gpio_regs {
- u32 gpio_dr;
- u32 gpio_dir;
- u32 gpio_psr;
-};
-
/* System Reset Controller (SRC) */
struct src {
u32 scr;
diff --git a/arch/arm/include/asm/arch-omap3/clocks_omap3.h b/arch/arm/include/asm/arch-omap3/clocks_omap3.h
index ef600dd..db29b7c 100644
--- a/arch/arm/include/asm/arch-omap3/clocks_omap3.h
+++ b/arch/arm/include/asm/arch-omap3/clocks_omap3.h
@@ -39,6 +39,7 @@
#define CORE_L4_DIV 2 /* 83MHz : L4 */
#define CORE_L3_DIV 2 /* 166MHz : L3 {DDR} */
#define GFX_DIV 2 /* 83MHz : CM_CLKSEL_GFX */
+#define GFX_DIV_36X 5 /* 200MHz : CM_CLKSEL_GFX */
#define WKUP_RSM 2 /* 41.5MHz: CM_CLKSEL_WKUP */
/* PER DPLL */
diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h
new file mode 100644
index 0000000..4c56e5e
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap3/dss.h
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * Referred to Linux Kernel DSS driver files for OMAP3 by
+ * Tomi Valkeinen from drivers/video/omap2/dss/
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 and any
+ * later version the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef DSS_H
+#define DSS_H
+
+/*
+ * DSS Base Registers
+ */
+#define OMAP3_DSS_BASE 0x48050040
+#define OMAP3_DISPC_BASE 0x48050440
+#define OMAP3_VENC_BASE 0x48050C00
+
+/* DSS Registers */
+struct dss_regs {
+ u32 control; /* 0x40 */
+ u32 sdi_control; /* 0x44 */
+ u32 pll_control; /* 0x48 */
+};
+
+/* DISPC Registers */
+struct dispc_regs {
+ u32 control; /* 0x40 */
+ u32 config; /* 0x44 */
+ u32 reserve_2; /* 0x48 */
+ u32 default_color0; /* 0x4C */
+ u32 default_color1; /* 0x50 */
+ u32 trans_color0; /* 0x54 */
+ u32 trans_color1; /* 0x58 */
+ u32 line_status; /* 0x5C */
+ u32 line_number; /* 0x60 */
+ u32 timing_h; /* 0x64 */
+ u32 timing_v; /* 0x68 */
+ u32 pol_freq; /* 0x6C */
+ u32 divisor; /* 0x70 */
+ u32 global_alpha; /* 0x74 */
+ u32 size_dig; /* 0x78 */
+ u32 size_lcd; /* 0x7C */
+};
+
+/* VENC Registers */
+struct venc_regs {
+ u32 rev_id; /* 0x00 */
+ u32 status; /* 0x04 */
+ u32 f_control; /* 0x08 */
+ u32 reserve_1; /* 0x0C */
+ u32 vidout_ctrl; /* 0x10 */
+ u32 sync_ctrl; /* 0x14 */
+ u32 reserve_2; /* 0x18 */
+ u32 llen; /* 0x1C */
+ u32 flens; /* 0x20 */
+ u32 hfltr_ctrl; /* 0x24 */
+ u32 cc_carr_wss_carr; /* 0x28 */
+ u32 c_phase; /* 0x2C */
+ u32 gain_u; /* 0x30 */
+ u32 gain_v; /* 0x34 */
+ u32 gain_y; /* 0x38 */
+ u32 black_level; /* 0x3C */
+ u32 blank_level; /* 0x40 */
+ u32 x_color; /* 0x44 */
+ u32 m_control; /* 0x48 */
+ u32 bstamp_wss_data; /* 0x4C */
+ u32 s_carr; /* 0x50 */
+ u32 line21; /* 0x54 */
+ u32 ln_sel; /* 0x58 */
+ u32 l21__wc_ctl; /* 0x5C */
+ u32 htrigger_vtrigger; /* 0x60 */
+ u32 savid__eavid; /* 0x64 */
+ u32 flen__fal; /* 0x68 */
+ u32 lal__phase_reset; /* 0x6C */
+ u32 hs_int_start_stop_x; /* 0x70 */
+ u32 hs_ext_start_stop_x; /* 0x74 */
+ u32 vs_int_start_x; /* 0x78 */
+ u32 vs_int_stop_x__vs_int_start_y; /* 0x7C */
+ u32 vs_int_stop_y__vs_ext_start_x; /* 0x80 */
+ u32 vs_ext_stop_x__vs_ext_start_y; /* 0x84 */
+ u32 vs_ext_stop_y; /* 0x88 */
+ u32 reserve_3; /* 0x8C */
+ u32 avid_start_stop_x; /* 0x90 */
+ u32 avid_start_stop_y; /* 0x94 */
+ u32 reserve_4; /* 0x98 */
+ u32 reserve_5; /* 0x9C */
+ u32 fid_int_start_x__fid_int_start_y; /* 0xA0 */
+ u32 fid_int_offset_y__fid_ext_start_x; /* 0xA4 */
+ u32 fid_ext_start_y__fid_ext_offset_y; /* 0xA8 */
+ u32 reserve_6; /* 0xAC */
+ u32 tvdetgp_int_start_stop_x; /* 0xB0 */
+ u32 tvdetgp_int_start_stop_y; /* 0xB4 */
+ u32 gen_ctrl; /* 0xB8 */
+ u32 reserve_7; /* 0xBC */
+ u32 reserve_8; /* 0xC0 */
+ u32 output_control; /* 0xC4 */
+ u32 dac_b__dac_c; /* 0xC8 */
+ u32 height_width; /* 0xCC */
+};
+
+/* Few Register Offsets */
+#define FRAME_MODE_SHIFT 1
+#define TFTSTN_SHIFT 3
+#define DATALINES_SHIFT 8
+
+/* Enabling Display controller */
+#define LCD_ENABLE 1
+#define DIG_ENABLE (1 << 1)
+#define GO_LCD (1 << 5)
+#define GO_DIG (1 << 6)
+#define GP_OUT0 (1 << 15)
+#define GP_OUT1 (1 << 16)
+
+#define DISPC_ENABLE (LCD_ENABLE | \
+ DIG_ENABLE | \
+ GO_LCD | \
+ GO_DIG | \
+ GP_OUT0| \
+ GP_OUT1)
+
+/* Configure VENC DSS Params */
+#define VENC_CLK_ENABLE (1 << 3)
+#define DAC_DEMEN (1 << 4)
+#define DAC_POWERDN (1 << 5)
+#define VENC_OUT_SEL (1 << 6)
+#define DIG_LPP_SHIFT 16
+#define VENC_DSS_CONFIG (VENC_CLK_ENABLE | \
+ DAC_DEMEN | \
+ DAC_POWERDN | \
+ VENC_OUT_SEL)
+/*
+ * Panel Configuration
+ */
+struct panel_config {
+ u32 timing_h;
+ u32 timing_v;
+ u32 pol_freq;
+ u32 divisor;
+ u32 lcd_size;
+ u32 panel_type;
+ u32 data_lines;
+ u32 load_mode;
+ u32 panel_color;
+};
+
+/*
+ * Generic DSS Functions
+ */
+void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
+ u32 height, u32 width);
+void omap3_dss_panel_config(const struct panel_config *panel_cfg);
+void omap3_dss_enable(void);
+
+#endif /* DSS_H */
diff --git a/arch/arm/include/asm/arch-omap3/gpio.h b/arch/arm/include/asm/arch-omap3/gpio.h
new file mode 100644
index 0000000..8bba3b0
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap3/gpio.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This work is derived from the linux 2.6.27 kernel source
+ * To fetch, use the kernel repository
+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ * Use the v2.6.27 tag.
+ *
+ * Below is the original's header including its copyright
+ *
+ * linux/arch/arm/plat-omap/gpio.c
+ *
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _GPIO_OMAP3_H
+#define _GPIO_OMAP3_H
+
+#include <asm/omap_gpio.h>
+
+#define OMAP34XX_GPIO1_BASE 0x48310000
+#define OMAP34XX_GPIO2_BASE 0x49050000
+#define OMAP34XX_GPIO3_BASE 0x49052000
+#define OMAP34XX_GPIO4_BASE 0x49054000
+#define OMAP34XX_GPIO5_BASE 0x49056000
+#define OMAP34XX_GPIO6_BASE 0x49058000
+
+#endif /* _GPIO_OMAP3_H */
diff --git a/arch/arm/include/asm/arch-omap3/omap3.h b/arch/arm/include/asm/arch-omap3/omap3.h
index d9d49da..230eaad 100644
--- a/arch/arm/include/asm/arch-omap3/omap3.h
+++ b/arch/arm/include/asm/arch-omap3/omap3.h
@@ -100,14 +100,6 @@ struct s32ktimer {
#endif /* __ASSEMBLY__ */
-/* OMAP3 GPIO registers */
-#define OMAP34XX_GPIO1_BASE 0x48310000
-#define OMAP34XX_GPIO2_BASE 0x49050000
-#define OMAP34XX_GPIO3_BASE 0x49052000
-#define OMAP34XX_GPIO4_BASE 0x49054000
-#define OMAP34XX_GPIO5_BASE 0x49056000
-#define OMAP34XX_GPIO6_BASE 0x49058000
-
#ifndef __ASSEMBLY__
struct gpio {
unsigned char res1[0x34];
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index 374e064..45c947d 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -679,12 +679,12 @@ struct dpll_regs {
struct dpll_params {
u32 m;
u32 n;
- u8 m2;
- u8 m3;
- u8 m4;
- u8 m5;
- u8 m6;
- u8 m7;
+ s8 m2;
+ s8 m3;
+ s8 m4;
+ s8 m5;
+ s8 m6;
+ s8 m7;
};
#endif /* _CLOCKS_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/gpio.h b/arch/arm/include/asm/arch-omap4/gpio.h
new file mode 100644
index 0000000..26f19d1
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/gpio.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This work is derived from the linux 2.6.27 kernel source
+ * To fetch, use the kernel repository
+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ * Use the v2.6.27 tag.
+ *
+ * Below is the original's header including its copyright
+ *
+ * linux/arch/arm/plat-omap/gpio.c
+ *
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _GPIO_OMAP4_H
+#define _GPIO_OMAP4_H
+
+#include <asm/omap_gpio.h>
+
+#define OMAP44XX_GPIO1_BASE 0x4A310000
+#define OMAP44XX_GPIO2_BASE 0x48055000
+#define OMAP44XX_GPIO3_BASE 0x48057000
+#define OMAP44XX_GPIO4_BASE 0x48059000
+#define OMAP44XX_GPIO5_BASE 0x4805B000
+#define OMAP44XX_GPIO6_BASE 0x4805D000
+
+#endif /* _GPIO_OMAP4_H */
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h
index 9aad0e6..7ff46d7 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap4.h
@@ -153,12 +153,4 @@ struct s32ktimer {
#define DEV_DATA_PTR_OFFSET 0x18
#define BOOT_MODE_OFFSET 0x8
-/* GPIO */
-#define OMAP44XX_GPIO1_BASE 0x4A310000
-#define OMAP44XX_GPIO2_BASE 0x48055000
-#define OMAP44XX_GPIO3_BASE 0x48057000
-#define OMAP44XX_GPIO4_BASE 0x48059000
-#define OMAP44XX_GPIO5_BASE 0x4805B000
-#define OMAP44XX_GPIO6_BASE 0x4805D000
-
#endif
diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
index 485b9bf..76b901b 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
@@ -126,14 +126,27 @@ struct s5pc110_gpio {
};
/* functions */
-void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg);
-void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en);
-void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio);
-void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en);
-unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio);
-void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode);
-void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode);
-void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
+void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg);
+void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en);
+void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio);
+void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en);
+unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio);
+void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode);
+void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode);
+void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
+
+/* GPIO pins per bank */
+#define GPIO_PER_BANK 8
+
+static inline unsigned int s5p_gpio_base(int nr)
+{
+ return S5PC110_GPIO_BASE;
+}
+
+#define s5pc110_gpio_get_nr(bank, pin) \
+ ((((((unsigned int)&(((struct s5pc110_gpio *)S5PC110_GPIO_BASE)->bank))\
+ - S5PC110_GPIO_BASE) / sizeof(struct s5p_gpio_bank)) \
+ * GPIO_PER_BANK) + pin)
#endif
/* Pin configurations */
diff --git a/arch/arm/include/asm/arch-s5pc2xx/gpio.h b/arch/arm/include/asm/arch-s5pc2xx/gpio.h
index 38303e4..8be620c 100644
--- a/arch/arm/include/asm/arch-s5pc2xx/gpio.h
+++ b/arch/arm/include/asm/arch-s5pc2xx/gpio.h
@@ -80,14 +80,43 @@ struct s5pc210_gpio_part3 {
};
/* functions */
-void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg);
-void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en);
-void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio);
-void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en);
-unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio);
-void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode);
-void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode);
-void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
+void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg);
+void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en);
+void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio);
+void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en);
+unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio);
+void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode);
+void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode);
+void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
+
+/* GPIO pins per bank */
+#define GPIO_PER_BANK 8
+
+#define s5pc210_gpio_part1_get_nr(bank, pin) \
+ ((((((unsigned int) &(((struct s5pc210_gpio_part1 *) \
+ S5PC210_GPIO_PART1_BASE)->bank)) \
+ - S5PC210_GPIO_PART1_BASE) / sizeof(struct s5p_gpio_bank)) \
+ * GPIO_PER_BANK) + pin)
+
+#define GPIO_PART1_MAX ((sizeof(struct s5pc210_gpio_part1) \
+ / sizeof(struct s5p_gpio_bank)) * GPIO_PER_BANK)
+
+#define s5pc210_gpio_part2_get_nr(bank, pin) \
+ (((((((unsigned int) &(((struct s5pc210_gpio_part2 *) \
+ S5PC210_GPIO_PART2_BASE)->bank)) \
+ - S5PC210_GPIO_PART2_BASE) / sizeof(struct s5p_gpio_bank)) \
+ * GPIO_PER_BANK) + pin) + GPIO_PART1_MAX)
+
+static inline unsigned int s5p_gpio_base(int nr)
+{
+ if (nr < GPIO_PART1_MAX)
+ return S5PC210_GPIO_PART1_BASE;
+ else
+ return S5PC210_GPIO_PART2_BASE;
+
+ return 0;
+}
+
#endif
/* Pin configurations */
diff --git a/arch/arm/include/asm/arch-tegra2/clk_rst.h b/arch/arm/include/asm/arch-tegra2/clk_rst.h
index 36e27b5..bd9d9ad 100644
--- a/arch/arm/include/asm/arch-tegra2/clk_rst.h
+++ b/arch/arm/include/asm/arch-tegra2/clk_rst.h
@@ -24,15 +24,34 @@
#ifndef _CLK_RST_H_
#define _CLK_RST_H_
+/* PLL registers - there are several PLLs in the clock controller */
+struct clk_pll {
+ uint pll_base; /* the control register */
+ uint pll_out; /* output control */
+ uint reserved;
+ uint pll_misc; /* other misc things */
+};
+
+/* PLL registers - there are several PLLs in the clock controller */
+struct clk_pll_simple {
+ uint pll_base; /* the control register */
+ uint pll_misc; /* other misc things */
+};
+
+/*
+ * Most PLLs use the clk_pll structure, but some have a simpler two-member
+ * structure for which we use clk_pll_simple. The reason for this non-
+ * othogonal setup is not stated.
+ */
+#define TEGRA_CLK_PLLS 6
+#define TEGRA_CLK_SIMPLE_PLLS 3 /* Number of simple PLLs */
+#define TEGRA_CLK_REGS 3 /* Number of clock enable registers */
+
/* Clock/Reset Controller (CLK_RST_CONTROLLER_) regs */
struct clk_rst_ctlr {
- uint crc_rst_src; /* _RST_SOURCE_0, 0x00 */
- uint crc_rst_dev_l; /* _RST_DEVICES_L_0, 0x04 */
- uint crc_rst_dev_h; /* _RST_DEVICES_H_0, 0x08 */
- uint crc_rst_dev_u; /* _RST_DEVICES_U_0, 0x0C */
- uint crc_clk_out_enb_l; /* _CLK_OUT_ENB_L_0, 0x10 */
- uint crc_clk_out_enb_h; /* _CLK_OUT_ENB_H_0, 0x14 */
- uint crc_clk_out_enb_u; /* _CLK_OUT_ENB_U_0, 0x18 */
+ uint crc_rst_src; /* _RST_SOURCE_0,0x00 */
+ uint crc_rst_dev[TEGRA_CLK_REGS]; /* _RST_DEVICES_L/H/U_0 */
+ uint crc_clk_out_enb[TEGRA_CLK_REGS]; /* _CLK_OUT_ENB_L/H/U_0 */
uint crc_reserved0; /* reserved_0, 0x1C */
uint crc_cclk_brst_pol; /* _CCLK_BURST_POLICY_0,0x20 */
uint crc_super_cclk_div; /* _SUPER_CCLK_DIVIDER_0,0x24 */
@@ -52,44 +71,11 @@ struct clk_rst_ctlr {
uint crc_osc_freq_det_stat; /* _OSC_FREQ_DET_STATUS_0,0x5C */
uint crc_reserved2[8]; /* reserved_2[8], 0x60-7C */
- uint crc_pllc_base; /* _PLLC_BASE_0, 0x80 */
- uint crc_pllc_out; /* _PLLC_OUT_0, 0x84 */
- uint crc_reserved3; /* reserved_3, 0x88 */
- uint crc_pllc_misc; /* _PLLC_MISC_0, 0x8C */
-
- uint crc_pllm_base; /* _PLLM_BASE_0, 0x90 */
- uint crc_pllm_out; /* _PLLM_OUT_0, 0x94 */
- uint crc_reserved4; /* reserved_4, 0x98 */
- uint crc_pllm_misc; /* _PLLM_MISC_0, 0x9C */
+ struct clk_pll crc_pll[TEGRA_CLK_PLLS]; /* PLLs from 0x80 to 0xdc */
- uint crc_pllp_base; /* _PLLP_BASE_0, 0xA0 */
- uint crc_pllp_outa; /* _PLLP_OUTA_0, 0xA4 */
- uint crc_pllp_outb; /* _PLLP_OUTB_0, 0xA8 */
- uint crc_pllp_misc; /* _PLLP_MISC_0, 0xAC */
+ /* PLLs from 0xe0 to 0xf4 */
+ struct clk_pll_simple crc_pll_simple[TEGRA_CLK_SIMPLE_PLLS];
- uint crc_plla_base; /* _PLLA_BASE_0, 0xB0 */
- uint crc_plla_out; /* _PLLA_OUT_0, 0xB4 */
- uint crc_reserved5; /* reserved_5, 0xB8 */
- uint crc_plla_misc; /* _PLLA_MISC_0, 0xBC */
-
- uint crc_pllu_base; /* _PLLU_BASE_0, 0xC0 */
- uint crc_reserved6; /* _reserved_6, 0xC4 */
- uint crc_reserved7; /* _reserved_7, 0xC8 */
- uint crc_pllu_misc; /* _PLLU_MISC_0, 0xCC */
-
- uint crc_plld_base; /* _PLLD_BASE_0, 0xD0 */
- uint crc_reserved8; /* _reserved_8, 0xD4 */
- uint crc_reserved9; /* _reserved_9, 0xD8 */
- uint crc_plld_misc; /* _PLLD_MISC_0, 0xDC */
-
- uint crc_pllx_base; /* _PLLX_BASE_0, 0xE0 */
- uint crc_pllx_misc; /* _PLLX_MISC_0, 0xE4 */
-
- uint crc_plle_base; /* _PLLE_BASE_0, 0xE8 */
- uint crc_plle_misc; /* _PLLE_MISC_0, 0xEC */
-
- uint crc_plls_base; /* _PLLS_BASE_0, 0xF0 */
- uint crc_plls_misc; /* _PLLS_MISC_0, 0xF4 */
uint crc_reserved10; /* _reserved_10, 0xF8 */
uint crc_reserved11; /* _reserved_11, 0xFC */
@@ -154,46 +140,37 @@ struct clk_rst_ctlr {
uint crc_cpu_cmplx_clr; /* _CPU_CMPLX_CLR_0, 0x344 */
};
-#define PLL_BYPASS (1 << 31)
-#define PLL_ENABLE (1 << 30)
-#define PLL_BASE_OVRRIDE (1 << 28)
-#define PLL_DIVP (1 << 20) /* post divider, b22:20 */
-#define PLL_DIVM 0x0C /* input divider, b4:0 */
+/* CLK_RST_CONTROLLER_CLK_CPU_CMPLX_0 */
+#define CPU1_CLK_STP_SHIFT 9
+
+#define CPU0_CLK_STP_SHIFT 8
+#define CPU0_CLK_STP_MASK (1U << CPU0_CLK_STP_SHIFT)
+
+/* CLK_RST_CONTROLLER_PLLx_BASE_0 */
+#define PLL_BYPASS_SHIFT 31
+#define PLL_BYPASS_MASK (1U << PLL_BYPASS_SHIFT)
-#define SWR_UARTD_RST (1 << 1)
-#define CLK_ENB_UARTD (1 << 1)
-#define SWR_UARTA_RST (1 << 6)
-#define CLK_ENB_UARTA (1 << 6)
+#define PLL_ENABLE_SHIFT 30
+#define PLL_ENABLE_MASK (1U << PLL_ENABLE_SHIFT)
-#define SWR_CPU_RST (1 << 0)
-#define CLK_ENB_CPU (1 << 0)
-#define SWR_CSITE_RST (1 << 9)
-#define CLK_ENB_CSITE (1 << 9)
+#define PLL_BASE_OVRRIDE_MASK (1U << 28)
-#define SET_CPURESET0 (1 << 0)
-#define SET_DERESET0 (1 << 4)
-#define SET_DBGRESET0 (1 << 12)
+#define PLL_DIVP_SHIFT 20
-#define SET_CPURESET1 (1 << 1)
-#define SET_DERESET1 (1 << 5)
-#define SET_DBGRESET1 (1 << 13)
+#define PLL_DIVN_SHIFT 8
-#define CLR_CPURESET0 (1 << 0)
-#define CLR_DERESET0 (1 << 4)
-#define CLR_DBGRESET0 (1 << 12)
+#define PLL_DIVM_SHIFT 0
-#define CLR_CPURESET1 (1 << 1)
-#define CLR_DERESET1 (1 << 5)
-#define CLR_DBGRESET1 (1 << 13)
+/* CLK_RST_CONTROLLER_PLLx_MISC_0 */
+#define PLL_CPCON_SHIFT 8
+#define PLL_CPCON_MASK (15U << PLL_CPCON_SHIFT)
-#define CPU0_CLK_STP (1 << 8)
-#define CPU1_CLK_STP (1 << 9)
+#define PLL_LFCON_SHIFT 4
-#define CPCON (1 << 8)
+#define PLLU_VCO_FREQ_SHIFT 20
-#define SWR_SDMMC4_RST (1 << 15)
-#define CLK_ENB_SDMMC4 (1 << 15)
-#define SWR_SDMMC3_RST (1 << 5)
-#define CLK_ENB_SDMMC3 (1 << 5)
+/* CLK_RST_CONTROLLER_OSC_CTRL_0 */
+#define OSC_FREQ_SHIFT 30
+#define OSC_FREQ_MASK (3U << OSC_FREQ_SHIFT)
#endif /* CLK_RST_H */
diff --git a/arch/arm/include/asm/arch-tegra2/clock.h b/arch/arm/include/asm/arch-tegra2/clock.h
new file mode 100644
index 0000000..d01aec8
--- /dev/null
+++ b/arch/arm/include/asm/arch-tegra2/clock.h
@@ -0,0 +1,263 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* Tegra2 clock control functions */
+
+#ifndef _CLOCK_H
+
+
+/* Set of oscillator frequencies supported in the internal API. */
+enum clock_osc_freq {
+ /* All in MHz, so 13_0 is 13.0MHz */
+ CLOCK_OSC_FREQ_13_0,
+ CLOCK_OSC_FREQ_19_2,
+ CLOCK_OSC_FREQ_12_0,
+ CLOCK_OSC_FREQ_26_0,
+
+ CLOCK_OSC_FREQ_COUNT,
+};
+
+/* The PLLs supported by the hardware */
+enum clock_pll_id {
+ CLOCK_PLL_ID_FIRST,
+ CLOCK_PLL_ID_CGENERAL = CLOCK_PLL_ID_FIRST,
+ CLOCK_PLL_ID_MEMORY,
+ CLOCK_PLL_ID_PERIPH,
+ CLOCK_PLL_ID_AUDIO,
+ CLOCK_PLL_ID_USB,
+ CLOCK_PLL_ID_DISPLAY,
+
+ /* now the simple ones */
+ CLOCK_PLL_ID_FIRST_SIMPLE,
+ CLOCK_PLL_ID_XCPU = CLOCK_PLL_ID_FIRST_SIMPLE,
+ CLOCK_PLL_ID_EPCI,
+ CLOCK_PLL_ID_SFROM32KHZ,
+
+ CLOCK_PLL_ID_COUNT,
+};
+
+/* The clocks supported by the hardware */
+enum periph_id {
+ PERIPH_ID_FIRST,
+
+ /* Low word: 31:0 */
+ PERIPH_ID_CPU = PERIPH_ID_FIRST,
+ PERIPH_ID_RESERVED1,
+ PERIPH_ID_RESERVED2,
+ PERIPH_ID_AC97,
+ PERIPH_ID_RTC,
+ PERIPH_ID_TMR,
+ PERIPH_ID_UART1,
+ PERIPH_ID_UART2,
+
+ /* 8 */
+ PERIPH_ID_GPIO,
+ PERIPH_ID_SDMMC2,
+ PERIPH_ID_SPDIF,
+ PERIPH_ID_I2S1,
+ PERIPH_ID_I2C1,
+ PERIPH_ID_NDFLASH,
+ PERIPH_ID_SDMMC1,
+ PERIPH_ID_SDMMC4,
+
+ /* 16 */
+ PERIPH_ID_TWC,
+ PERIPH_ID_PWC,
+ PERIPH_ID_I2S2,
+ PERIPH_ID_EPP,
+ PERIPH_ID_VI,
+ PERIPH_ID_2D,
+ PERIPH_ID_USBD,
+ PERIPH_ID_ISP,
+
+ /* 24 */
+ PERIPH_ID_3D,
+ PERIPH_ID_IDE,
+ PERIPH_ID_DISP2,
+ PERIPH_ID_DISP1,
+ PERIPH_ID_HOST1X,
+ PERIPH_ID_VCP,
+ PERIPH_ID_RESERVED30,
+ PERIPH_ID_CACHE2,
+
+ /* Middle word: 63:32 */
+ PERIPH_ID_MEM,
+ PERIPH_ID_AHBDMA,
+ PERIPH_ID_APBDMA,
+ PERIPH_ID_RESERVED35,
+ PERIPH_ID_KBC,
+ PERIPH_ID_STAT_MON,
+ PERIPH_ID_PMC,
+ PERIPH_ID_FUSE,
+
+ /* 40 */
+ PERIPH_ID_KFUSE,
+ PERIPH_ID_SBC1,
+ PERIPH_ID_SNOR,
+ PERIPH_ID_SPI1,
+ PERIPH_ID_SBC2,
+ PERIPH_ID_XIO,
+ PERIPH_ID_SBC3,
+ PERIPH_ID_DVC_I2C,
+
+ /* 48 */
+ PERIPH_ID_DSI,
+ PERIPH_ID_TVO,
+ PERIPH_ID_MIPI,
+ PERIPH_ID_HDMI,
+ PERIPH_ID_CSI,
+ PERIPH_ID_TVDAC,
+ PERIPH_ID_I2C2,
+ PERIPH_ID_UART3,
+
+ /* 56 */
+ PERIPH_ID_RESERVED56,
+ PERIPH_ID_EMC,
+ PERIPH_ID_USB2,
+ PERIPH_ID_USB3,
+ PERIPH_ID_MPE,
+ PERIPH_ID_VDE,
+ PERIPH_ID_BSEA,
+ PERIPH_ID_BSEV,
+
+ /* Upper word 95:64 */
+ PERIPH_ID_SPEEDO,
+ PERIPH_ID_UART4,
+ PERIPH_ID_UART5,
+ PERIPH_ID_I2C3,
+ PERIPH_ID_SBC4,
+ PERIPH_ID_SDMMC3,
+ PERIPH_ID_PCIE,
+ PERIPH_ID_OWR,
+
+ /* 72 */
+ PERIPH_ID_AFI,
+ PERIPH_ID_CORESIGHT,
+ PERIPH_ID_RESERVED74,
+ PERIPH_ID_AVPUCQ,
+ PERIPH_ID_RESERVED76,
+ PERIPH_ID_RESERVED77,
+ PERIPH_ID_RESERVED78,
+ PERIPH_ID_RESERVED79,
+
+ /* 80 */
+ PERIPH_ID_RESERVED80,
+ PERIPH_ID_RESERVED81,
+ PERIPH_ID_RESERVED82,
+ PERIPH_ID_RESERVED83,
+ PERIPH_ID_IRAMA,
+ PERIPH_ID_IRAMB,
+ PERIPH_ID_IRAMC,
+ PERIPH_ID_IRAMD,
+
+ /* 88 */
+ PERIPH_ID_CRAM2,
+
+ PERIPH_ID_COUNT,
+};
+
+/* Converts a clock number to a clock register: 0=L, 1=H, 2=U */
+#define PERIPH_REG(id) ((id) >> 5)
+
+/* Mask value for a clock (within PERIPH_REG(id)) */
+#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
+
+/* return 1 if a PLL ID is in range */
+#define clock_pll_id_isvalid(id) ((id) >= CLOCK_PLL_ID_FIRST && \
+ (id) < CLOCK_PLL_ID_COUNT)
+
+/* return 1 if a peripheral ID is in range */
+#define clock_periph_id_isvalid(id) ((id) >= PERIPH_ID_FIRST && \
+ (id) < PERIPH_ID_COUNT)
+
+/* PLL stabilization delay in usec */
+#define CLOCK_PLL_STABLE_DELAY_US 300
+
+/* return the current oscillator clock frequency */
+enum clock_osc_freq clock_get_osc_freq(void);
+
+/*
+ * Start PLL using the provided configuration parameters.
+ *
+ * @param id clock id
+ * @param divm input divider
+ * @param divn feedback divider
+ * @param divp post divider 2^n
+ * @param cpcon charge pump setup control
+ * @param lfcon loop filter setup control
+ *
+ * @returns monotonic time in us that the PLL will be stable
+ */
+unsigned long clock_start_pll(enum clock_pll_id id, u32 divm, u32 divn,
+ u32 divp, u32 cpcon, u32 lfcon);
+
+/*
+ * Enable a clock
+ *
+ * @param id clock id
+ */
+void clock_enable(enum periph_id clkid);
+
+/*
+ * Set whether a clock is enabled or disabled.
+ *
+ * @param id clock id
+ * @param enable 1 to enable, 0 to disable
+ */
+void clock_set_enable(enum periph_id clkid, int enable);
+
+/*
+ * Reset a peripheral. This puts it in reset, waits for a delay, then takes
+ * it out of reset and waits for th delay again.
+ *
+ * @param periph_id peripheral to reset
+ * @param us_delay time to delay in microseconds
+ */
+void reset_periph(enum periph_id periph_id, int us_delay);
+
+/*
+ * Put a peripheral into or out of reset.
+ *
+ * @param periph_id peripheral to reset
+ * @param enable 1 to put into reset, 0 to take out of reset
+ */
+void reset_set_enable(enum periph_id periph_id, int enable);
+
+
+/* CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET/CLR_0 */
+enum crc_reset_id {
+ /* Things we can hold in reset for each CPU */
+ crc_rst_cpu = 1,
+ crc_rst_de = 1 << 2, /* What is de? */
+ crc_rst_watchdog = 1 << 3,
+ crc_rst_debug = 1 << 4,
+};
+
+/*
+ * Put parts of the CPU complex into or out of reset.\
+ *
+ * @param cpu cpu number (0 or 1 on Tegra2)
+ * @param which which parts of the complex to affect (OR of crc_reset_id)
+ * @param reset 1 to assert reset, 0 to de-assert
+ */
+void reset_cmplx_set_enable(int cpu, int which, int reset);
+
+#endif
diff --git a/arch/arm/include/asm/arch-tegra2/pinmux.h b/arch/arm/include/asm/arch-tegra2/pinmux.h
index cce936d..b8a4753 100644
--- a/arch/arm/include/asm/arch-tegra2/pinmux.h
+++ b/arch/arm/include/asm/arch-tegra2/pinmux.h
@@ -24,6 +24,142 @@
#ifndef _PINMUX_H_
#define _PINMUX_H_
+/* Pins which we can set to tristate or normal */
+enum pmux_pin {
+ /* APB_MISC_PP_TRISTATE_REG_A_0 */
+ PIN_ATA,
+ PIN_ATB,
+ PIN_ATC,
+ PIN_ATD,
+ PIN_CDEV1,
+ PIN_CDEV2,
+ PIN_CSUS,
+ PIN_DAP1,
+
+ PIN_DAP2,
+ PIN_DAP3,
+ PIN_DAP4,
+ PIN_DTA,
+ PIN_DTB,
+ PIN_DTC,
+ PIN_DTD,
+ PIN_DTE,
+
+ PIN_GPU,
+ PIN_GPV,
+ PIN_I2CP,
+ PIN_IRTX,
+ PIN_IRRX,
+ PIN_KBCB,
+ PIN_KBCA,
+ PIN_PMC,
+
+ PIN_PTA,
+ PIN_RM,
+ PIN_KBCE,
+ PIN_KBCF,
+ PIN_GMA,
+ PIN_GMC,
+ PIN_SDMMC1,
+ PIN_OWC,
+
+ /* 32: APB_MISC_PP_TRISTATE_REG_B_0 */
+ PIN_GME,
+ PIN_SDC,
+ PIN_SDD,
+ PIN_RESERVED0,
+ PIN_SLXA,
+ PIN_SLXC,
+ PIN_SLXD,
+ PIN_SLXK,
+
+ PIN_SPDI,
+ PIN_SPDO,
+ PIN_SPIA,
+ PIN_SPIB,
+ PIN_SPIC,
+ PIN_SPID,
+ PIN_SPIE,
+ PIN_SPIF,
+
+ PIN_SPIG,
+ PIN_SPIH,
+ PIN_UAA,
+ PIN_UAB,
+ PIN_UAC,
+ PIN_UAD,
+ PIN_UCA,
+ PIN_UCB,
+
+ PIN_RESERVED1,
+ PIN_ATE,
+ PIN_KBCC,
+ PIN_RESERVED2,
+ PIN_RESERVED3,
+ PIN_GMB,
+ PIN_GMD,
+ PIN_DDC,
+
+ /* 64: APB_MISC_PP_TRISTATE_REG_C_0 */
+ PIN_LD0,
+ PIN_LD1,
+ PIN_LD2,
+ PIN_LD3,
+ PIN_LD4,
+ PIN_LD5,
+ PIN_LD6,
+ PIN_LD7,
+
+ PIN_LD8,
+ PIN_LD9,
+ PIN_LD10,
+ PIN_LD11,
+ PIN_LD12,
+ PIN_LD13,
+ PIN_LD14,
+ PIN_LD15,
+
+ PIN_LD16,
+ PIN_LD17,
+ PIN_LHP0,
+ PIN_LHP1,
+ PIN_LHP2,
+ PIN_LVP0,
+ PIN_LVP1,
+ PIN_HDINT,
+
+ PIN_LM0,
+ PIN_LM1,
+ PIN_LVS,
+ PIN_LSC0,
+ PIN_LSC1,
+ PIN_LSCK,
+ PIN_LDC,
+ PIN_LCSN,
+
+ /* 96: APB_MISC_PP_TRISTATE_REG_D_0 */
+ PIN_LSPI,
+ PIN_LSDA,
+ PIN_LSDI,
+ PIN_LPW0,
+ PIN_LPW1,
+ PIN_LPW2,
+ PIN_LDI,
+ PIN_LHS,
+
+ PIN_LPP,
+ PIN_RESERVED4,
+ PIN_KBCD,
+ PIN_GPU7,
+ PIN_DTF,
+ PIN_UDA,
+ PIN_CRTP,
+ PIN_SDB,
+};
+
+
+#define TEGRA_TRISTATE_REGS 4
+
/* APB MISC Pin Mux and Tristate (APB_MISC_PP_) registers */
struct pmux_tri_ctlr {
uint pmt_reserved0; /* ABP_MISC_PP_ reserved offset 00 */
@@ -31,10 +167,7 @@ struct pmux_tri_ctlr {
uint pmt_strap_opt_a; /* _STRAPPING_OPT_A_0, offset 08 */
uint pmt_reserved2; /* ABP_MISC_PP_ reserved offset 0C */
uint pmt_reserved3; /* ABP_MISC_PP_ reserved offset 10 */
- uint pmt_tri_a; /* _TRI_STATE_REG_A_0, offset 14 */
- uint pmt_tri_b; /* _TRI_STATE_REG_B_0, offset 18 */
- uint pmt_tri_c; /* _TRI_STATE_REG_C_0, offset 1C */
- uint pmt_tri_d; /* _TRI_STATE_REG_D_0, offset 20 */
+ uint pmt_tri[TEGRA_TRISTATE_REGS]; /* _TRI_STATE_REG_A/B/C/D_0 14-20 */
uint pmt_cfg_ctl; /* _CONFIG_CTL_0, offset 24 */
uint pmt_reserved[22]; /* ABP_MISC_PP_ reserved offs 28-7C */
@@ -48,14 +181,16 @@ struct pmux_tri_ctlr {
uint pmt_ctl_g; /* _PIN_MUX_CTL_G_0, offset 98 */
};
-#define Z_GMC (1 << 29)
-#define Z_IRRX (1 << 20)
-#define Z_IRTX (1 << 19)
-#define Z_GMA (1 << 28)
-#define Z_GME (1 << 0)
-#define Z_ATB (1 << 1)
-#define Z_SDB (1 << 15)
-#define Z_SDC (1 << 1)
-#define Z_SDD (1 << 2)
+/* Converts a pin number to a tristate register: 0=A, 1=B, 2=C, 3=D */
+#define TRISTATE_REG(id) ((id) >> 5)
+
+/* Mask value for a tristate (within TRISTATE_REG(id)) */
+#define TRISTATE_MASK(id) (1 << ((id) & 0x1f))
+
+/* Set a pin to tristate */
+void pinmux_tristate_enable(enum pmux_pin pin);
+
+/* Set a pin to normal (non tristate) */
+void pinmux_tristate_disable(enum pmux_pin pin);
#endif /* PINMUX_H */
diff --git a/board/edb93xx/flash_cfg.c b/arch/arm/include/asm/arch-tegra2/timer.h
index a4c2048..adefa2c 100644
--- a/board/edb93xx/flash_cfg.c
+++ b/arch/arm/include/asm/arch-tegra2/timer.h
@@ -1,8 +1,5 @@
/*
- * Flash setup for Cirrus edb93xx boards
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
+ * Copyright (c) 2011 The Chromium OS Authors.
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -22,17 +19,12 @@
* MA 02111-1307 USA
*/
-#include <common.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
+/* Tegra2 timer functions */
-#define SMC_BCR6_VALUE (2 << SMC_BCR_IDCY_SHIFT | 5 << SMC_BCR_WST1_SHIFT | \
- SMC_BCR_BLE | 2 << SMC_BCR_WST2_SHIFT | \
- 1 << SMC_BCR_MW_SHIFT)
+#ifndef _TEGRA2_TIMER_H
+#define _TEGRA2_TIMER_H
-void flash_cfg(void)
-{
- struct smc_regs *smc = (struct smc_regs *)SMC_BASE;
+/* returns the current monotonic timer value in microseconds */
+unsigned long timer_get_us(void);
- writel(SMC_BCR6_VALUE, &smc->bcr6);
-}
+#endif
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 14a56f6..a7fb251 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -275,10 +275,6 @@ void board_init_f(ulong bootflag)
gd->mon_len = _bss_end_ofs;
-#ifdef CONFIG_MACH_TYPE
- gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */
-#endif
-
for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
if ((*init_fnc_ptr)() != 0) {
hang ();
@@ -376,6 +372,11 @@ void board_init_f(ulong bootflag)
gd->bd = bd;
debug("Reserving %zu Bytes for Board Info at: %08lx\n",
sizeof (bd_t), addr_sp);
+
+#ifdef CONFIG_MACH_TYPE
+ gd->bd->bi_arch_number = CONFIG_MACH_TYPE; /* board id for Linux */
+#endif
+
addr_sp -= sizeof (gd_t);
id = (gd_t *) addr_sp;
debug("Reserving %zu Bytes for Global Data at: %08lx\n",
@@ -451,11 +452,9 @@ void board_init_r(gd_t *id, ulong dest_addr)
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
monitor_flash_len = _end_ofs;
- /*
- * Enable D$:
- * I$, if needed, must be already enabled in start.S
- */
- dcache_enable();
+
+ /* Enable caches */
+ enable_caches();
debug("monitor flash len: %08lX\n", monitor_flash_len);
board_init(); /* Setup chipselects */
@@ -626,7 +625,7 @@ void board_init_r(gd_t *id, ulong dest_addr)
pram += (LOGBUFF_LEN + LOGBUFF_OVERHEAD) / 1024;
#endif
#endif
- sprintf((char *)memsz, "%ldk", (bd->bi_memsize / 1024) - pram);
+ sprintf((char *)memsz, "%ldk", (gd->ram_size / 1024) - pram);
setenv("mem", (char *)memsz);
}
#endif
diff --git a/arch/arm/lib/cache-pl310.c b/arch/arm/lib/cache-pl310.c
index 36c629c..21d13f7 100644
--- a/arch/arm/lib/cache-pl310.c
+++ b/arch/arm/lib/cache-pl310.c
@@ -26,6 +26,7 @@
#include <asm/armv7.h>
#include <asm/pl310.h>
#include <config.h>
+#include <common.h>
struct pl310_regs *const pl310 = (struct pl310_regs *)CONFIG_SYS_PL310_BASE;
@@ -89,21 +90,23 @@ void v7_outer_cache_inval_range(u32 start, u32 stop)
u32 pa, line_size = 32;
/*
- * If start address is not aligned to cache-line flush the first
- * line to prevent affecting somebody else's buffer
+ * If start address is not aligned to cache-line do not
+ * invalidate the first cache-line
*/
if (start & (line_size - 1)) {
- v7_outer_cache_flush_range(start, start + 1);
+ printf("ERROR: %s - start address is not aligned - 0x%08x\n",
+ __func__, start);
/* move to next cache line */
start = (start + line_size - 1) & ~(line_size - 1);
}
/*
- * If stop address is not aligned to cache-line flush the last
- * line to prevent affecting somebody else's buffer
+ * If stop address is not aligned to cache-line do not
+ * invalidate the last cache-line
*/
if (stop & (line_size - 1)) {
- v7_outer_cache_flush_range(stop, stop + 1);
+ printf("ERROR: %s - stop address is not aligned - 0x%08x\n",
+ __func__, stop);
/* align to the beginning of this cache line */
stop &= ~(line_size - 1);
}
diff --git a/arch/arm/lib/cache.c b/arch/arm/lib/cache.c
index 92b61a2..b545fb7 100644
--- a/arch/arm/lib/cache.c
+++ b/arch/arm/lib/cache.c
@@ -53,3 +53,15 @@ void __flush_dcache_all(void)
}
void flush_dcache_all(void)
__attribute__((weak, alias("__flush_dcache_all")));
+
+
+/*
+ * Default implementation of enable_caches()
+ * Real implementation should be in platform code
+ */
+void __enable_caches(void)
+{
+ puts("WARNING: Caches not enabled\n");
+}
+void enable_caches(void)
+ __attribute__((weak, alias("__enable_caches")));
diff --git a/arch/arm/lib/memcpy.S b/arch/arm/lib/memcpy.S
index 3b5aeec..f655256 100644
--- a/arch/arm/lib/memcpy.S
+++ b/arch/arm/lib/memcpy.S
@@ -60,6 +60,9 @@
.globl memcpy
memcpy:
+ cmp r0, r1
+ moveq pc, lr
+
enter r4, lr
subs r2, r2, #4
diff --git a/board/armadillo/armadillo.c b/board/armadillo/armadillo.c
deleted file mode 100644
index a825144..0000000
--- a/board/armadillo/armadillo.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Activate LED flasher */
- IO_LEDFLSH = 0x40;
-
- /* arch number MACH_TYPE_ARMADILLO - not official*/
- gd->bd->bi_arch_number = 83;
-
- /* location of boot parameters */
- gd->bd->bi_boot_params = 0xc0000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/armadillo/config.mk b/board/armadillo/config.mk
deleted file mode 100644
index ecb8b74..0000000
--- a/board/armadillo/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#address where u-boot will be relocated
-CONFIG_SYS_TEXT_BASE = 0xc0f80000
diff --git a/board/armadillo/flash.c b/board/armadillo/flash.c
deleted file mode 100644
index cf7d7f6..0000000
--- a/board/armadillo/flash.c
+++ /dev/null
@@ -1,340 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Flash driver for armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE 0x400000
-
-/*value used by hermit is 0x200*/
-/*document says sector size is either 64k in low mem reg and 8k in high mem reg*/
-#define MAIN_SECT_SIZE 0x10000
-
-#define UNALIGNED_MASK (3)
-#define FL_WORD(addr) (*(volatile unsigned short*)(addr))
-#define FLASH_TIMEOUT 20000000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id = (FUJ_MANUFACT & FLASH_VENDMASK);
- /*(INTEL_ID_28F128J3 & FLASH_TYPEMASK); */
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] =
- flashbase + j * MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (FUJ_MANUFACT & FLASH_VENDMASK):
- printf ("Fujitsu: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-/*
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf ("28F128J3 (128Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-*/
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-/*
-Done: ;
-*/
-}
-
-/*
- * * Loop until both write state machines complete.
- * */
-static unsigned short flash_status_wait (unsigned long addr,
- unsigned short value)
-{
- unsigned short status;
- long timeout = FLASH_TIMEOUT;
-
- while (((status = (FL_WORD (addr))) != value) && timeout > 0) {
- timeout--;
- }
- return status;
-}
-
-/*
- * Loop until the Write State machine is ready, then do a full error
- * check. Clear status and leave the flash in Read Array mode; return
- * 0 for no error, -1 for error.
- */
-static int flash_status_full_check (unsigned long addr, unsigned short value1,
- unsigned short value2)
-{
- unsigned short status1, status2;
-
- status1 = flash_status_wait (addr, value1);
- status2 = flash_status_wait (addr + 2, value2);
- return (status1 != value1 || status2 != value2) ? -1 : 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int flag, prot, sect;
- int rc = ERR_OK;
- unsigned long base;
- unsigned long addr;
- ulong start;
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (FUJ_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- printf ("Erasing %d sectors starting at sector %2d.\n"
- "This make take some time ... ",
- s_last - s_first, sect);
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
- /* ARM simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
-
- addr = sect * MAIN_SECT_SIZE;
- addr &= ~(unsigned long) UNALIGNED_MASK; /* word align */
- base = addr & 0xF0000000;
-
- FL_WORD (base + (0x555 << 1)) = 0xAA;
- FL_WORD (base + (0x2AA << 1)) = 0x55;
- FL_WORD (base + (0x555 << 1)) = 0x80;
- FL_WORD (base + (0x555 << 1)) = 0xAA;
- FL_WORD (base + (0x2AA << 1)) = 0x55;
- FL_WORD (addr) = 0x30;
- if (flash_status_full_check (addr, 0xFFFF, 0xFFFF))
- return ERR_PROTECTED;
- }
- }
- printf ("\nDone.\n");
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (flag)
- enable_interrupts ();
-
- return rc;
-}
-
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ushort data)
-{
- int flag;
- unsigned long base;
- ulong start;
-
- /* Check if Flash is (sufficiently) erased
- */
- if ((FL_WORD (dest) & data) != data)
- return ERR_NOT_ERASED;
-
- /*if(dest & UNALIGNED_MASK) return ERR_ALIGN; */
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts ();
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- base = dest & 0xF0000000;
- FL_WORD (base + (0x555 << 1)) = 0xAA;
- FL_WORD (base + (0x2AA << 1)) = 0x55;
- FL_WORD (base + (0x555 << 1)) = 0xA0;
- FL_WORD (dest) = data;
- /*printf("writing 0x%p = 0x%x\n",dest,data); */
- if (flash_status_wait (dest, data) != data)
- return ERR_PROG_ERROR;
-
- if (flag)
- enable_interrupts ();
-
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- ushort data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
- printf ("Writing %lu short data to 0x%lx from 0x%p.\n ", cnt, wp, src);
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- data = *((vu_short *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- printf ("\nDone.\n");
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/armadillo/lowlevel_init.S b/board/armadillo/lowlevel_init.S
deleted file mode 100644
index e7d373d..0000000
--- a/board/armadillo/lowlevel_init.S
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * Initialization stuff - taken from hermit
- * (C) Copyright 2005 Rowel Atienza <rowel@diwalabs.com>
- * Armadillo board HT1070
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-/* setting up the memory */
-#define SRAM_START 0x60000000
-#define SRAM_SIZE 0x0000c000
-
-.globl lowlevel_init
-lowlevel_init:
- mov r0, #0x70 /* 32-bit code + data, MMU mandatory */
- mcr p15, 0, r0, c1, c0, 0 /* MMU init */
-
- mov r0, #0
- mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
- mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
-
- mov r0, #0x80000000 /* I/O base */
-
- mov r1, #0x6 /* CLKCTL_73 in SYSCON3 */
- add r2, r0, #0x2200 /* address of SYSCON3 in r2 */
- str r1, [r2] /* set clock speed to 73.728 MHz */
-
- mov r1, #0x81 /* 64KHz DRAM refresh period */
- str r1, [r0, #0x200] /* set DRFPR */
-
- mov r1, #0x500 /* permanent enable, 16bits wide */
- add r1, r1, #0x42 /* 128Mbit, CAS lat = 2 SDRAM */
- add r2, r0, #0x2300 /* load address in r2 */
- str r1, [r2]
-
- mov r1, #0x100 /* SDRAM refresh rate */
- add r2, r0, #0x2340 /* load address in r2 */
- str r1, [r2]
-
- mov sp, #SRAM_START /* init stack pointer */
- add sp, sp, #SRAM_SIZE
-
- /* everything is fine now */
- mov pc, lr
diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c
index 9bb56b5..c8d2bc7 100644
--- a/board/armltd/integrator/integrator.c
+++ b/board/armltd/integrator/integrator.c
@@ -86,15 +86,9 @@ int misc_init_r (void)
return (0);
}
-/******************************
- Routine:
- Description:
-******************************/
int dram_init (void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
#ifdef CONFIG_CM_SPD_DETECT
{
extern void dram_query(void);
@@ -118,8 +112,13 @@ extern void dram_query(void);
*/
sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4;
gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift;
-
+ gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+ 0x01000000 << sdram_shift);
}
+#else
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+ gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+ PHYS_SDRAM_1_SIZE);
#endif /* CM_SPD_DETECT */
return 0;
diff --git a/board/armltd/integrator/lowlevel_init.S b/board/armltd/integrator/lowlevel_init.S
index ab9589c..6f55bb5 100644
--- a/board/armltd/integrator/lowlevel_init.S
+++ b/board/armltd/integrator/lowlevel_init.S
@@ -199,7 +199,7 @@ cm_remap:
/* Now 0x00000000 is writeable, replace the vectors */
ldr r0, =_start /* r0 <- start of vectors */
- ldr r2, =_armboot_start /* r2 <- past vectors */
+ ldr r2, =_TEXT_BASE /* r2 <- past vectors */
sub r1,r1,r1 /* destination 0x00000000 */
copy_vec:
diff --git a/board/armltd/integrator/split_by_variant.sh b/board/armltd/integrator/split_by_variant.sh
deleted file mode 100755
index 19fc832..0000000
--- a/board/armltd/integrator/split_by_variant.sh
+++ /dev/null
@@ -1,220 +0,0 @@
-#!/bin/sh
-
-mkdir -p ${obj}include
-mkdir -p ${obj}board/armltd/integrator
-
-config_file=${obj}include/config.h
-
-if [ "$1" = "ap" ]
-then
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-cat > ${config_file} << _EOF
-/* Integrator configuration implied by Makefile target */
-#define CONFIG_INTEGRATOR /* Integrator board */
-#define CONFIG_ARCH_INTEGRATOR 1 /* Integrator/AP */
-_EOF
-
-# ---------------------------------------------------------
-# Set the core module defines according to Core Module
-# ---------------------------------------------------------
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$2" = "" ]
-then
- echo "$0:: No parameters - using arm_intcm"
-else
- case "$2" in
- ap7_config)
- cpu="arm_intcm"
- variant="unported core module CM7TDMI"
- ;;
-
- ap966)
- cpu="arm_intcm"
- variant="unported core module CM966E-S"
- ;;
-
- ap922_config)
- cpu="arm_intcm"
- variant="unported core module CM922T"
- ;;
-
- integratorap_config | \
- ap_config)
- cpu="arm_intcm"
- variant="unspecified core module"
- ;;
-
- ap720t_config)
- cpu="arm720t"
- echo "#define CONFIG_CM720T 1 /* CPU core is ARM720T */" \
- >> ${config_file}
- variant="Core module CM720T"
- ;;
-
- ap922_XA10_config)
- cpu="arm_intcm"
- variant="unported core module CM922T_XA10"
- echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
- >> ${config_file}
- ;;
-
- ap920t_config)
- cpu="arm920t"
- variant="Core module CM920T"
- echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
- >> ${config_file}
- ;;
-
- ap926ejs_config)
- cpu="arm926ejs"
- variant="Core module CM926EJ-S"
- echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
- >> ${config_file}
- ;;
-
- ap946es_config)
- cpu="arm946es"
- variant="Core module CM946E-S"
- echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
- >> ${config_file}
- ;;
-
- *)
- echo "$0:: Unknown core module"
- variant="unknown core module"
- cpu="arm_intcm"
- ;;
-
- esac
-fi
-
-case "$cpu" in
- arm_intcm)
- cat >> ${config_file} << _EOF
-/* Core module undefined/not ported */
-#define CONFIG_ARM_INTCM 1
-#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
-#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
-#undef CONFIG_CM_REMAP /* CM may not support remapping */
-#undef CONFIG_CM_INIT /* CM may not have initialization reg */
-#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
-/* May not be processor without cache support */
-#define CONFIG_SYS_ICACHE_OFF 1
-#define CONFIG_SYS_DCACHE_OFF 1
-_EOF
- ;;
-
- arm720t)
- cat >> ${config_file} << _EOF
-/* May not be processor without cache support */
-#define CONFIG_SYS_ICACHE_OFF 1
-#define CONFIG_SYS_DCACHE_OFF 1
-_EOF
- ;;
-esac
-
-else
-
-# ---------------------------------------------------------
-# Set the platform defines
-# ---------------------------------------------------------
-cat >> ${config_file} << _EOF
-/* Integrator configuration implied by Makefile target */
-#define CONFIG_INTEGRATOR /* Integrator board */
-#define CONFIG_ARCH_CINTEGRATOR 1 /* Integrator/CP */
-_EOF
-
-cpu="arm_intcm"
-variant="unknown core module"
-
-if [ "$2" = "" ]
-then
- echo "$0:: No parameters - using arm_intcm"
-else
- case "$2" in
- ap966)
- cpu="arm_intcm"
- variant="unported core module CM966E-S"
- ;;
-
- ap922_config)
- cpu="arm_intcm"
- variant="unported core module CM922T"
- ;;
-
- integratorcp_config | \
- cp_config)
- cpu="arm_intcm"
- variant="unspecified core module"
- ;;
-
- cp922_XA10_config)
- cpu="arm_intcm"
- variant="unported core module CM922T_XA10"
- echo "#define CONFIG_CM922T_XA10 1 /* CPU core is ARM922T_XA10 */" \
- >> ${config_file}
- ;;
-
- cp920t_config)
- cpu="arm920t"
- variant="Core module CM920T"
- echo "#define CONFIG_CM920T 1 /* CPU core is ARM920T */" \
- >> ${config_file}
- ;;
-
- cp926ejs_config)
- cpu="arm926ejs"
- variant="Core module CM926EJ-S"
- echo "#define CONFIG_CM926EJ_S 1 /* CPU core is ARM926EJ-S */" \
- >> ${config_file}
- ;;
-
-
- cp946es_config)
- cpu="arm946es"
- variant="Core module CM946E-S"
- echo "#define CONFIG_CM946E_S 1 /* CPU core is ARM946E-S */" \
- >> ${config_file}
- ;;
-
- cp1136_config)
- cpu="arm1136"
- variant="Core module CM1136EJF-S"
- echo "#define CONFIG_CM1136EJF_S 1 /* CPU core is ARM1136JF-S */" \
- >> ${config_file}
- ;;
-
- *)
- echo "$0:: Unknown core module"
- variant="unknown core module"
- cpu="arm_intcm"
- ;;
-
- esac
-
-fi
-
-if [ "$cpu" = "arm_intcm" ]
-then
- cat >> ${config_file} << _EOF
-/* Core module undefined/not ported */
-#define CONFIG_ARM_INTCM 1
-#undef CONFIG_CM_MULTIPLE_SSRAM /* CM may not have multiple SSRAM mapping */
-#undef CONFIG_CM_SPD_DETECT /* CM may not support SPD query */
-#undef CONFIG_CM_REMAP /* CM may not support remapping */
-#undef CONFIG_CM_INIT /* CM may not have initialization reg */
-#undef CONFIG_CM_TCRAM /* CM may not have TCRAM */
-_EOF
-fi
-
-fi # ap
-
-# ---------------------------------------------------------
-# Complete the configuration
-# ---------------------------------------------------------
-$MKCONFIG -a -n "${2%%_config}" integrator$1 arm $cpu integrator armltd
-echo "Variant: $variant with core $cpu"
diff --git a/board/armltd/versatile/versatile.c b/board/armltd/versatile/versatile.c
index ee8cb5e..4a5c31d 100644
--- a/board/armltd/versatile/versatile.c
+++ b/board/armltd/versatile/versatile.c
@@ -94,7 +94,7 @@ int misc_init_r (void)
int dram_init (void)
{
/* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((volatile void *)CONFIG_SYS_SDRAM_BASE,
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
diff --git a/board/assabet/Makefile b/board/assabet/Makefile
deleted file mode 100644
index b3cf4aa..0000000
--- a/board/assabet/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# 2004 (c) MontaVista Software, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := assabet.o
-SOBJS := setup.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/assabet/assabet.c b/board/assabet/assabet.c
deleted file mode 100644
index 753c8d2..0000000
--- a/board/assabet/assabet.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <SA-1100.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Board dependent initialisation
- */
-
-#define ECOR 0x8000
-#define ECOR_RESET 0x80
-#define ECOR_LEVEL_IRQ 0x40
-#define ECOR_WR_ATTRIB 0x04
-#define ECOR_ENABLE 0x01
-
-#define ECSR 0x8002
-#define ECSR_IOIS8 0x20
-#define ECSR_PWRDWN 0x04
-#define ECSR_INT 0x02
-#define SMC_IO_SHIFT 2
-#define NCR_0 (*((volatile u_char *)(0x100000a0)))
-#define NCR_ENET_OSC_EN (1<<3)
-
-static inline u8
-readb(volatile u8 * p)
-{
- return *p;
-}
-
-static inline void
-writeb(u8 v, volatile u8 * p)
-{
- *p = v;
-}
-
-static void
-smc_init(void)
-{
- u8 ecor;
- u8 ecsr;
- volatile u8 *addr = (volatile u8 *)(0x18000000 + (1 << 25));
-
- NCR_0 |= NCR_ENET_OSC_EN;
- udelay(100);
-
- ecor = readb(addr + (ECOR << SMC_IO_SHIFT)) & ~ECOR_RESET;
- writeb(ecor | ECOR_RESET, addr + (ECOR << SMC_IO_SHIFT));
- udelay(100);
-
- /*
- * The device will ignore all writes to the enable bit while
- * reset is asserted, even if the reset bit is cleared in the
- * same write. Must clear reset first, then enable the device.
- */
- writeb(ecor, addr + (ECOR << SMC_IO_SHIFT));
- writeb(ecor | ECOR_ENABLE, addr + (ECOR << SMC_IO_SHIFT));
-
- /*
- * Set the appropriate byte/word mode.
- */
- ecsr = readb(addr + (ECSR << SMC_IO_SHIFT)) & ~ECSR_IOIS8;
- ecsr |= ECSR_IOIS8;
- writeb(ecsr, addr + (ECSR << SMC_IO_SHIFT));
- udelay(100);
-}
-
-static void
-neponset_init(void)
-{
- smc_init();
-}
-
-int
-board_init(void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_ASSABET;
- gd->bd->bi_boot_params = 0xc0000100;
-
- neponset_init();
-
- return 0;
-}
-
-int
-dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/assabet/config.mk b/board/assabet/config.mk
deleted file mode 100644
index d9866a0..0000000
--- a/board/assabet/config.mk
+++ /dev/null
@@ -1,7 +0,0 @@
-#
-# SA-1110 based Intel Assabet board
-#
-# The Intel Assabet 1 bank of 32 MiB SDRAM
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1f00000
diff --git a/board/assabet/setup.S b/board/assabet/setup.S
deleted file mode 100644
index 56ea0dd..0000000
--- a/board/assabet/setup.S
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- * 2004 (c) MontaVista Software, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include "config.h"
-#include "version.h"
-
-
-/*-----------------------------------------------------------------------
- * Board defines:
- */
-
-#define MDCNFG 0x00
-#define MDCAS00 0x04
-#define MDCAS01 0x08
-#define MDCAS02 0x0C
-#define MSC0 0x10
-#define MSC1 0x14
-#define MECR 0x18
-#define MDREFR 0x1C
-#define MDCAS20 0x20
-#define MDCAS21 0x24
-#define MDCAS22 0x28
-#define MSC2 0x2C
-#define SMCNFG 0x30
-
-#define ASSABET_BCR (0x12000000)
-#define ASSABET_BCR_DB1110 (0x00a07490 | (0<<16) | (0<<17))
-#define ASSABET_SCR_nNEPONSET (1 << 9)
-#define NEPONSET_LEDS (0x10000010)
-
-
-/*-----------------------------------------------------------------------
- * Setup parameters for the board:
- */
-
-
-MEM_BASE: .long 0xa0000000
-MEM_START: .long 0xc0000000
-
-mdcnfg: .long 0x72547254
-mdcas00: .long 0xaaaaaa7f
-mdcas01: .long 0xaaaaaaaa
-mdcas02: .long 0xaaaaaaaa
-msc0: .long 0x4b384370
-msc1: .long 0x22212419
-mecr: .long 0x994a994a
-mdrefr: .long 0x04340327
-mdcas20: .long 0xaaaaaa7f
-mdcas21: .long 0xaaaaaaaa
-mdcas22: .long 0xaaaaaaaa
-msc2: .long 0x42196669
-smcnfg: .long 0x00000000
-
-BCR: .long ASSABET_BCR
-BCR_DB1110: .long ASSABET_BCR_DB1110
-LEDS: .long NEPONSET_LEDS
-
-
- .globl lowlevel_init
-lowlevel_init:
-
- /* Setting up the memory and stuff */
-
- ldr r0, MEM_BASE
- ldr r1, mdcas00
- str r1, [r0, #MDCAS00]
- ldr r1, mdcas01
- str r1, [r0, #MDCAS01]
- ldr r1, mdcas02
- str r1, [r0, #MDCAS02]
- ldr r1, mdcas20
- str r1, [r0, #MDCAS20]
- ldr r1, mdcas21
- str r1, [r0, #MDCAS21]
- ldr r1, mdcas22
- str r1, [r0, #MDCAS22]
- ldr r1, mdrefr
- str r1, [r0, #MDREFR]
- ldr r1, mecr
- str r1, [r0, #MECR]
- ldr r1, msc0
- str r1, [r0, #MSC0]
- ldr r1, msc1
- str r1, [r0, #MSC1]
- ldr r1, msc2
- str r1, [r0, #MSC2]
- ldr r1, smcnfg
- str r1, [r0, #SMCNFG]
-
- ldr r1, mdcnfg
- str r1, [r0, #MDCNFG]
-
- /* Load something to activate bank */
- ldr r2, MEM_START
-.rept 8
- ldr r3, [r2]
-.endr
-
- /* Enable SDRAM */
- orr r1, r1, #0x00000001
- str r1, [r0, #MDCNFG]
-
- ldr r1, BCR
- ldr r2, BCR_DB1110
- str r2, [r1]
-
- ldr r1, LEDS
- mov r0, #0x3
- str r0, [r1]
-
- /* All done... */
- mov pc, lr
diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile
deleted file mode 100644
index 2eec0ce..0000000
--- a/board/atmel/at91cap9adk/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Stelian Pop <stelian.pop@leadtechdesign.com>
-# Lead Tech Design <www.leadtechdesign.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += at91cap9adk.o
-COBJS-y += led.o
-COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c
deleted file mode 100644
index 2ab8bc2..0000000
--- a/board/atmel/at91cap9adk/at91cap9adk.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/at91cap9.h>
-#include <asm/arch/at91cap9_matrix.h>
-#include <asm/arch/at91sam9_smc.h>
-#include <asm/arch/at91_common.h>
-#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
-#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
-#include <lcd.h>
-#include <atmel_lcdc.h>
-#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
-#include <net.h>
-#endif
-#include <netdev.h>
-
-#define MP_BLOCK_3_BASE 0xFDF00000
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-static void at91cap9_slowclock_hw_init(void)
-{
- /*
- * On AT91CAP9 revC CPUs, the slow clock can be based on an
- * internal impreciseRC oscillator or an external 32kHz oscillator.
- * Switch to the latter.
- */
-#define ARCH_ID_AT91CAP9_REVB 0x399
-#define ARCH_ID_AT91CAP9_REVC 0x601
- if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) {
- unsigned i, tmp = at91_sys_read(AT91_SCKCR);
- if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) {
- timer_init();
- tmp |= AT91CAP9_SCKCR_OSC32EN;
- at91_sys_write(AT91_SCKCR, tmp);
- for (i = 0; i < 1200; i++)
- udelay(1000);
- tmp |= AT91CAP9_SCKCR_OSCSEL_32;
- at91_sys_write(AT91_SCKCR, tmp);
- udelay(200);
- tmp &= ~AT91CAP9_SCKCR_RCEN;
- at91_sys_write(AT91_SCKCR, tmp);
- }
- }
-}
-
-static void at91cap9_nor_hw_init(void)
-{
- unsigned long csa;
-
- /* Ensure EBI supply is 3.3V */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
- /* Configure SMC CS0 for parallel flash */
- at91_sys_write(AT91_SMC_SETUP(0),
- AT91_SMC_NWESETUP_(4) | AT91_SMC_NCS_WRSETUP_(2) |
- AT91_SMC_NRDSETUP_(4) | AT91_SMC_NCS_RDSETUP_(2));
- at91_sys_write(AT91_SMC_PULSE(0),
- AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(10) |
- AT91_SMC_NRDPULSE_(8) | AT91_SMC_NCS_RDPULSE_(10));
- at91_sys_write(AT91_SMC_CYCLE(0),
- AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
- at91_sys_write(AT91_SMC_MODE(0),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE |
- AT91_SMC_DBW_16 | AT91_SMC_TDF_(1));
-}
-
-#ifdef CONFIG_CMD_NAND
-static void at91cap9_nand_hw_init(void)
-{
- unsigned long csa;
-
- /* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA |
- AT91_MATRIX_EBI_VDDIOMSEL_3_3V);
-
- /* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(1) |
- AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(1));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(6) |
- AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(6));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
-#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
-#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
-#endif
- AT91_SMC_TDF_(1));
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD);
-
- /* RDY/BSY is not connected */
-
- /* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
-}
-#endif
-
-#ifdef CONFIG_MACB
-static void at91cap9_macb_hw_init(void)
-{
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_EMAC);
-
- /*
- * Disable pull-up on:
- * RXDV (PB22) => PHY normal mode (not Test mode)
- * ERX0 (PB25) => PHY ADDR0
- * ERX1 (PB26) => PHY ADDR1 => PHYADDR = 0x0
- *
- * PHY has internal pull-down
- */
- writel(pin_to_mask(AT91_PIN_PB22) |
- pin_to_mask(AT91_PIN_PB25) |
- pin_to_mask(AT91_PIN_PB26),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
-
- /* Need to reset PHY -> 500ms reset */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0D << 8)) |
- AT91_RSTC_URSTEN);
-
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
-
- /* Wait for end hardware reset */
- while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
-
- /* Restore NRST value */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0 << 8)) |
- AT91_RSTC_URSTEN);
-
- /* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PB22) |
- pin_to_mask(AT91_PIN_PB25) |
- pin_to_mask(AT91_PIN_PB26),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
-
- at91_macb_hw_init();
-
- /* Unlock EMAC, 3 0 2 1 sequence */
-#define MP_MAC_KEY0 0x5969cb2a
-#define MP_MAC_KEY1 0xb4a1872e
-#define MP_MAC_KEY2 0x05683fbc
-#define MP_MAC_KEY3 0x3634fba4
-#define UNLOCK_MAC 0x00000008
- writel(MP_MAC_KEY3, MP_BLOCK_3_BASE + 0x3c);
- writel(MP_MAC_KEY0, MP_BLOCK_3_BASE + 0x30);
- writel(MP_MAC_KEY2, MP_BLOCK_3_BASE + 0x38);
- writel(MP_MAC_KEY1, MP_BLOCK_3_BASE + 0x34);
- writel(UNLOCK_MAC, MP_BLOCK_3_BASE + 0x40);
-}
-#endif
-
-#ifdef CONFIG_USB_OHCI_NEW
-static void at91cap9_uhp_hw_init(void)
-{
- /* Unlock USB OHCI, 3 2 0 1 sequence */
-#define MP_OHCI_KEY0 0x896c11ca
-#define MP_OHCI_KEY1 0x68ebca21
-#define MP_OHCI_KEY2 0x4823efbc
-#define MP_OHCI_KEY3 0x8651aae4
-#define UNLOCK_OHCI 0x00000010
- writel(MP_OHCI_KEY3, MP_BLOCK_3_BASE + 0x3c);
- writel(MP_OHCI_KEY2, MP_BLOCK_3_BASE + 0x38);
- writel(MP_OHCI_KEY0, MP_BLOCK_3_BASE + 0x30);
- writel(MP_OHCI_KEY1, MP_BLOCK_3_BASE + 0x34);
- writel(UNLOCK_OHCI, MP_BLOCK_3_BASE + 0x40);
-}
-#endif
-
-#ifdef CONFIG_LCD
-vidinfo_t panel_info = {
- vl_col: 240,
- vl_row: 320,
- vl_clk: 4965000,
- vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
- ATMEL_LCDC_INVFRAME_INVERTED,
- vl_bpix: 3,
- vl_tft: 1,
- vl_hsync_len: 5,
- vl_left_margin: 1,
- vl_right_margin:33,
- vl_vsync_len: 1,
- vl_upper_margin:1,
- vl_lower_margin:0,
- mmio: AT91CAP9_LCDC_BASE,
-};
-
-void lcd_enable(void)
-{
- at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */
-}
-
-void lcd_disable(void)
-{
- at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */
-}
-
-static void at91cap9_lcd_hw_init(void)
-{
- at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
- at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
- at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC);
-
- gd->fb_base = 0;
-}
-
-#ifdef CONFIG_LCD_INFO
-#include <nand.h>
-#include <version.h>
-
-void lcd_show_board_info(void)
-{
- ulong dram_size, nand_size;
- int i;
- char temp[32];
-
- lcd_printf ("%s\n", U_BOOT_VERSION);
- lcd_printf ("(C) 2008 ATMEL Corp\n");
- lcd_printf ("at91support@atmel.com\n");
- lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
- strmhz(temp, get_cpu_clk_rate()));
-
- dram_size = 0;
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++)
- dram_size += gd->bd->bi_dram[i].size;
- nand_size = 0;
- for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++)
- nand_size += nand_info[i].size;
- lcd_printf (" %ld MB SDRAM, %ld MB NAND\n",
- dram_size >> 20,
- nand_size >> 20 );
-}
-#endif /* CONFIG_LCD_INFO */
-#endif
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
- /* arch number of AT91CAP9ADK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91CAP9ADK;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- at91_serial_hw_init();
- at91cap9_slowclock_hw_init();
- at91cap9_nor_hw_init();
-#ifdef CONFIG_CMD_NAND
- at91cap9_nand_hw_init();
-#endif
-#ifdef CONFIG_HAS_DATAFLASH
- at91_spi0_hw_init(1 << 0);
-#endif
-#ifdef CONFIG_MACB
- at91cap9_macb_hw_init();
-#endif
-#ifdef CONFIG_USB_OHCI_NEW
- at91cap9_uhp_hw_init();
-#endif
-#ifdef CONFIG_LCD
- at91cap9_lcd_hw_init();
-#endif
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-void reset_phy(void)
-{
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91CAP9_BASE_EMAC, 0x00);
-#endif
- return rc;
-}
diff --git a/board/atmel/at91cap9adk/config.mk b/board/atmel/at91cap9adk/config.mk
deleted file mode 100644
index 797da0e..0000000
--- a/board/atmel/at91cap9adk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x73000000
diff --git a/board/atmel/at91rm9200dk/Makefile b/board/atmel/at91rm9200dk/Makefile
deleted file mode 100644
index bc3dbc6..0000000
--- a/board/atmel/at91rm9200dk/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y += $(BOARD).o
-COBJS-y += flash.o
-COBJS-y += led.o
-ifdef CONFIG_HAS_DATAFLASH
-COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += mux.o
-COBJS-y += partition.o
-endif
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/atmel/at91rm9200dk/at91rm9200dk.c b/board/atmel/at91rm9200dk/at91rm9200dk.c
deleted file mode 100644
index 49b5fe3..0000000
--- a/board/atmel/at91rm9200dk/at91rm9200dk.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <exports.h>
-#include <netdev.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Enable Ctrlc */
- console_init_f ();
-
- /* Correct IRDA resistor problem */
- /* Set PA23_TXD in Output */
- ((AT91PS_PIO) AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of AT91RM9200DK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_AT91RM9200DK;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-void board_reset (void)
-{
- AT91PS_PIO pio = AT91C_BASE_PIOA;
-
- /* Clear PA19 to trigger the hard reset */
- writel(0x00080000, pio->PIO_CODR);
- writel(0x00080000, pio->PIO_OER);
- writel(0x00080000, pio->PIO_PER);
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = dm9161_InitPhy;
- p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
- p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
- p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
-
-/*
- * Disk On Chip (NAND) Millenium initialization.
- * The NAND lives in the CS2* space
- */
-#if defined(CONFIG_CMD_NAND)
-extern ulong nand_probe (ulong physadr);
-
-#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
-void nand_init (void)
-{
- /* Setup Smart Media, fitst enable the address range of CS3 */
- *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
- /* set the bus interface characteristics based on
- tDS Data Set up Time 30 - ns
- tDH Data Hold Time 20 - ns
- tALS ALE Set up Time 20 - ns
- 16ns at 60 MHz ~= 3 */
-/*memory mapping structures */
-#define SM_ID_RWH (5 << 28)
-#define SM_RWH (1 << 28)
-#define SM_RWS (0 << 24)
-#define SM_TDF (1 << 8)
-#define SM_NWS (3)
- AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
- AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
- SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
-
- /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
- *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
- AT91C_PC3_BFBAA_SMWE;
- *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
- AT91C_PC3_BFBAA_SMWE;
-
- /* Configure PC2 as input (signal READY of the SmartMedia) */
- *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */
- *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */
-
- /* Configure PB1 as input (signal Card Detect of the SmartMedia) */
- *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */
- *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */
-
- /* PIOB and PIOC clock enabling */
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-
- if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
- printf (" No SmartMedia card inserted\n");
-#ifdef DEBUG
- printf (" SmartMedia card inserted\n");
-
- printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
-#endif
- printf ("%4lu MB\n", nand_probe(AT91_SMARTMEDIA_BASE) >> 20);
-}
-#endif
diff --git a/board/atmel/at91rm9200dk/config.mk b/board/atmel/at91rm9200dk/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/atmel/at91rm9200dk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/atmel/at91rm9200dk/flash.c b/board/atmel/at91rm9200dk/flash.c
deleted file mode 100644
index be22743..0000000
--- a/board/atmel/at91rm9200dk/flash.c
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * (C) Copyright 2002
- * Lineo, Inc. <www.lineo.com>
- * Bernhard Kuhn <bkuhn@lineo.com>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-ulong myflush(void);
-
-
-/* Flash Organization Structure */
-typedef struct OrgDef
-{
- unsigned int sector_number;
- unsigned int sector_size;
-} OrgDef;
-
-
-/* Flash Organizations */
-OrgDef OrgAT49BV16x4[] =
-{
- { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
- { 2, 32*1024 }, /* 2 * 32 kBytes sectors */
- { 30, 64*1024 }, /* 30 * 64 kBytes sectors */
-};
-
-OrgDef OrgAT49BV16x4A[] =
-{
- { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
- { 31, 64*1024 }, /* 31 * 64 kBytes sectors */
-};
-
-OrgDef OrgAT49BV6416[] =
-{
- { 8, 8*1024 }, /* 8 * 8 kBytes sectors */
- { 127, 64*1024 }, /* 127 * 64 kBytes sectors */
-};
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/* AT49BV1614A Codes */
-#define FLASH_CODE1 0xAA
-#define FLASH_CODE2 0x55
-#define ID_IN_CODE 0x90
-#define ID_OUT_CODE 0xF0
-
-
-#define CMD_READ_ARRAY 0x00F0
-#define CMD_UNLOCK1 0x00AA
-#define CMD_UNLOCK2 0x0055
-#define CMD_ERASE_SETUP 0x0080
-#define CMD_ERASE_CONFIRM 0x0030
-#define CMD_PROGRAM 0x00A0
-#define CMD_UNLOCK_BYPASS 0x0020
-#define CMD_SECTOR_UNLOCK 0x0070
-
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00005555<<1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00002AAA<<1)))
-
-#define BIT_ERASE_DONE 0x0080
-#define BIT_RDY_MASK 0x0080
-#define BIT_PROGRAM_ERROR 0x0020
-#define BIT_TIMEOUT 0x80000000 /* our flag */
-
-#define READY 1
-#define ERR 2
-#define TMO 4
-
-/*-----------------------------------------------------------------------
- */
-void flash_identification (flash_info_t * info)
-{
- volatile u16 manuf_code, device_code, add_device_code;
-
- MEM_FLASH_ADDR1 = FLASH_CODE1;
- MEM_FLASH_ADDR2 = FLASH_CODE2;
- MEM_FLASH_ADDR1 = ID_IN_CODE;
-
- manuf_code = *(volatile u16 *) CONFIG_SYS_FLASH_BASE;
- device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + 2);
- add_device_code = *(volatile u16 *) (CONFIG_SYS_FLASH_BASE + (3 << 1));
-
- MEM_FLASH_ADDR1 = FLASH_CODE1;
- MEM_FLASH_ADDR2 = FLASH_CODE2;
- MEM_FLASH_ADDR1 = ID_OUT_CODE;
-
- /* Vendor type */
- info->flash_id = ATM_MANUFACT & FLASH_VENDMASK;
- printf ("Atmel: ");
-
- if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-
- if ((add_device_code & FLASH_TYPEMASK) ==
- (ATM_ID_BV1614A & FLASH_TYPEMASK)) {
- info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK;
- printf ("AT49BV1614A (16Mbit)\n");
- } else { /* AT49BV1614 Flash */
- info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
- printf ("AT49BV1614 (16Mbit)\n");
- }
-
- } else if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV6416 & FLASH_TYPEMASK)) {
- info->flash_id |= ATM_ID_BV6416 & FLASH_TYPEMASK;
- printf ("AT49BV6416 (64Mbit)\n");
- }
-}
-
-ushort flash_number_sector(OrgDef *pOrgDef, unsigned int nb_blocks)
-{
- int i, nb_sectors = 0;
-
- for (i=0; i<nb_blocks; i++){
- nb_sectors += pOrgDef[i].sector_number;
- }
-
- return nb_sectors;
-}
-
-void flash_unlock_sector(flash_info_t * info, unsigned int sector)
-{
- volatile u16 *addr = (volatile u16 *) (info->start[sector]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- *addr = CMD_SECTOR_UNLOCK;
-}
-
-
-ulong flash_init (void)
-{
- int i, j, k;
- unsigned int flash_nb_blocks, sector;
- unsigned int start_address;
- OrgDef *pOrgDef;
-
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_identification (&flash_info[i]);
-
- if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
-
- pOrgDef = OrgAT49BV16x4;
- flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef);
- } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV1614A & FLASH_TYPEMASK)){ /* AT49BV1614A Flash */
-
- pOrgDef = OrgAT49BV16x4A;
- flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef);
- } else if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */
-
- pOrgDef = OrgAT49BV6416;
- flash_nb_blocks = sizeof (OrgAT49BV6416) / sizeof (OrgDef);
- } else {
- flash_nb_blocks = 0;
- pOrgDef = OrgAT49BV16x4;
- }
-
- flash_info[i].sector_count = flash_number_sector(pOrgDef, flash_nb_blocks);
- memset (flash_info[i].protect, 0, flash_info[i].sector_count);
-
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
-
- sector = 0;
- start_address = flashbase;
- flash_info[i].size = 0;
-
- for (j = 0; j < flash_nb_blocks; j++) {
- for (k = 0; k < pOrgDef[j].sector_number; k++) {
- flash_info[i].start[sector++] = start_address;
- start_address += pOrgDef[j].sector_size;
- flash_info[i].size += pOrgDef[j].sector_size;
- }
- }
-
- size += flash_info[i].size;
-
- if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
- (ATM_ID_BV6416 & FLASH_TYPEMASK)){ /* AT49BV6416 Flash */
-
- /* Unlock all sectors at reset */
- for (j=0; j<flash_info[i].sector_count; j++){
- flash_unlock_sector(&flash_info[i], j);
- }
- }
- }
-
- /* Protect binary boot image */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + CONFIG_SYS_BOOT_SIZE - 1, &flash_info[0]);
-
- /* Protect environment variables */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- /* Protect U-Boot gzipped image */
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_U_BOOT_BASE,
- CONFIG_SYS_U_BOOT_BASE + CONFIG_SYS_U_BOOT_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (ATM_MANUFACT & FLASH_VENDMASK):
- printf ("Atmel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (ATM_ID_BV1614 & FLASH_TYPEMASK):
- printf ("AT49BV1614 (16Mbit)\n");
- break;
- case (ATM_ID_BV1614A & FLASH_TYPEMASK):
- printf ("AT49BV1614A (16Mbit)\n");
- break;
- case (ATM_ID_BV6416 & FLASH_TYPEMASK):
- printf ("AT49BV6416 (64Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- return;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ulong result;
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
- int chip1;
- ulong start;
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (ATM_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
- volatile u16 *addr = (volatile u16 *) (info->start[sect]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- chip1 = 0;
-
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
- chip1 = TMO;
- break;
- }
-
- if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
- chip1 = READY;
-
- } while (!chip1);
-
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
- if (chip1 == ERR) {
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (chip1 == TMO) {
- rc = ERR_TIMOUT;
- goto outahere;
- }
-
- printf ("ok.\n");
- } else { /* it was protected */
- printf ("protected!\n");
- }
- }
-
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile u16 *addr = (volatile u16 *) dest;
- ulong result;
- int rc = ERR_OK;
- int cflag, iflag;
- int chip1;
- ulong start;
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait until flash is ready */
- chip1 = 0;
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- chip1 = ERR | TMO;
- break;
- }
- if (!chip1 && ((result & 0x80) == (data & 0x80)))
- chip1 = READY;
-
- } while (!chip1);
-
- *addr = CMD_READ_ARRAY;
-
- if (chip1 == ERR || *addr != data)
- rc = ERR_PROG_ERROR;
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong wp, data;
- int rc;
-
- if (addr & 1) {
- printf ("unaligned destination not supported\n");
- return ERR_ALIGN;
- };
-
- if ((int) src & 1) {
- printf ("unaligned source not supported\n");
- return ERR_ALIGN;
- };
-
- wp = addr;
-
- while (cnt >= 2) {
- data = *((volatile u16 *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 1) {
- data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) <<
- 8);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 1;
- wp += 1;
- cnt -= 1;
- };
-
- return ERR_OK;
-}
diff --git a/board/atmel/at91rm9200dk/led.c b/board/atmel/at91rm9200dk/led.c
deleted file mode 100644
index 47a3bfc..0000000
--- a/board/atmel/at91rm9200dk/led.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright 2006
- * Atmel Nordic AB <www.atmel.com>
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-
-#define GREEN_LED AT91C_PIO_PB0
-#define YELLOW_LED AT91C_PIO_PB1
-#define RED_LED AT91C_PIO_PB2
-
-void green_LED_on(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_CODR = GREEN_LED;
-}
-
-void yellow_LED_on(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_CODR = YELLOW_LED;
-}
-
-void red_LED_on(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_CODR = RED_LED;
-}
-
-void green_LED_off(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_SODR = GREEN_LED;
-}
-
-void yellow_LED_off(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_SODR = YELLOW_LED;
-}
-
-void red_LED_off(void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- PIOB->PIO_SODR = RED_LED;
-}
-
-
-void coloured_LED_init (void)
-{
- AT91PS_PIO PIOB = AT91C_BASE_PIOB;
- AT91PS_PMC PMC = AT91C_BASE_PMC;
- PMC->PMC_PCER = (1 << AT91C_ID_PIOB); /* Enable PIOB clock */
- /* Disable peripherals on LEDs */
- PIOB->PIO_PER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
- /* Enable pins as outputs */
- PIOB->PIO_OER = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
- /* Turn all LEDs OFF */
- PIOB->PIO_SODR = AT91C_PIO_PB2 | AT91C_PIO_PB1 | AT91C_PIO_PB0;
-}
diff --git a/board/atmel/at91rm9200dk/mux.c b/board/atmel/at91rm9200dk/mux.c
deleted file mode 100644
index a00563e..0000000
--- a/board/atmel/at91rm9200dk/mux.c
+++ /dev/null
@@ -1,29 +0,0 @@
-#include <config.h>
-#include <common.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-int AT91F_GetMuxStatus(void) {
- AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
- AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
-
-
- if(AT91C_BASE_PIOB->PIO_ODSR & CONFIG_SYS_DATAFLASH_MMC_PIO)
- return 1;
-
- return 0;
-}
-
-void AT91F_SelectMMC(void) {
- AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
- AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
- /* Set Output */
- AT91C_BASE_PIOB->PIO_SODR = CONFIG_SYS_DATAFLASH_MMC_PIO;
-}
-
-void AT91F_SelectSPI(void) {
- AT91C_BASE_PIOB->PIO_PER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Set in PIO mode */
- AT91C_BASE_PIOB->PIO_OER = CONFIG_SYS_DATAFLASH_MMC_PIO; /* Configure in output */
- /* Clear Output */
- AT91C_BASE_PIOB->PIO_CODR = CONFIG_SYS_DATAFLASH_MMC_PIO;
-}
diff --git a/board/atmel/at91rm9200dk/partition.c b/board/atmel/at91rm9200dk/partition.c
deleted file mode 100644
index c739b11..0000000
--- a/board/atmel/at91rm9200dk/partition.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ulf Samuelsson <ulf@atmel.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-#include <common.h>
-#include <config.h>
-#include <asm/hardware.h>
-#include <dataflash.h>
-
-AT91S_DATAFLASH_INFO dataflash_info[CONFIG_SYS_MAX_DATAFLASH_BANKS];
-
-struct dataflash_addr cs[CONFIG_SYS_MAX_DATAFLASH_BANKS] = {
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
- {CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3, 3}
-};
-
-/*define the area offsets*/
-dataflash_protect_t area_list[NB_DATAFLASH_AREA] = {
- {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"},
- {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"},
- {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"},
- {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"},
- {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"},
-};
diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
index f92b20f..24a8606 100644
--- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
+++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c
@@ -23,17 +23,14 @@
*/
#include <common.h>
-#include <asm/sizes.h>
-#include <asm/arch/at91sam9g45.h>
-#include <asm/arch/at91sam9_matrix.h>
+#include <asm/io.h>
+#include <asm/arch/at91sam9g45_matrix.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
-#include <asm/arch/clk.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/arch/clk.h>
#include <lcd.h>
#include <atmel_lcdc.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
@@ -49,35 +46,38 @@ DECLARE_GLOBAL_DATA_PTR;
*/
#ifdef CONFIG_CMD_NAND
-static void at91sam9m10g45ek_nand_hw_init(void)
+void at91sam9m10g45ek_nand_hw_init(void)
{
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
unsigned long csa;
/* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
+ writel(csa, &matrix->ebicsa);
/* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(2));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(4));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(2),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(4),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
+ AT91_SMC_MODE_DBW_16 |
#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
+ AT91_SMC_MODE_DBW_8 |
#endif
- AT91_SMC_TDF_(3));
+ AT91_SMC_MODE_TDF_CYCLE(3),
+ &smc->cs[3].mode);
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIOC);
+ writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
/* Configure RDY/BSY */
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
@@ -90,7 +90,9 @@ static void at91sam9m10g45ek_nand_hw_init(void)
#ifdef CONFIG_CMD_USB
static void at91sam9m10g45ek_usb_hw_init(void)
{
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
+ writel(1 << ATMEL_ID_PIODE, &pmc->pcer);
at91_set_gpio_output(AT91_PIN_PD1, 0);
at91_set_gpio_output(AT91_PIN_PD3, 0);
@@ -100,47 +102,50 @@ static void at91sam9m10g45ek_usb_hw_init(void)
#ifdef CONFIG_MACB
static void at91sam9m10g45ek_macb_hw_init(void)
{
- unsigned long rstc;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
+ struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
+ unsigned long erstl;
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_EMAC);
+ writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
/*
* Disable pull-up on:
- * RXDV (PA15) => PHY normal mode (not Test mode)
- * ERX0 (PA12) => PHY ADDR0
- * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
+ * RXDV (PA15) => PHY normal mode (not Test mode)
+ * ERX0 (PA12) => PHY ADDR0
+ * ERX1 (PA13) => PHY ADDR1 => PHYADDR = 0x0
*
* PHY has internal pull-down
*/
writel(pin_to_mask(AT91_PIN_PA15) |
pin_to_mask(AT91_PIN_PA12) |
pin_to_mask(AT91_PIN_PA13),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
+ &pioa->pudr);
- rstc = at91_sys_read(AT91_RSTC_MR);
+ erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
/* Need to reset PHY -> 500ms reset */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0D << 8)) |
- AT91_RSTC_URSTEN);
+ writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
+ AT91_RSTC_MR_URSTEN, &rstc->mr);
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+ writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
/* Wait for end hardware reset */
- while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+ while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
+ ;
/* Restore NRST value */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (rstc) |
- AT91_RSTC_URSTEN);
+ writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
+ &rstc->mr);
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA15) |
pin_to_mask(AT91_PIN_PA12) |
pin_to_mask(AT91_PIN_PA13),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+ &pioa->puer);
+ /* And the pins. */
at91_macb_hw_init();
}
#endif
@@ -161,7 +166,7 @@ vidinfo_t panel_info = {
vl_vsync_len: 1,
vl_upper_margin:40,
vl_lower_margin:1,
- mmio: AT91SAM9G45_LCDC_BASE,
+ mmio : ATMEL_BASE_LCDC,
};
@@ -177,6 +182,8 @@ void lcd_disable(void)
static void at91sam9m10g45ek_lcd_hw_init(void)
{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
@@ -208,7 +215,7 @@ static void at91sam9m10g45ek_lcd_hw_init(void)
at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_LCDC);
+ writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
gd->fb_base = CONFIG_AT91SAM9G45_LCD_BASE;
}
@@ -227,7 +234,7 @@ void lcd_show_board_info(void)
lcd_printf ("(C) 2008 ATMEL Corp\n");
lcd_printf ("at91support@atmel.com\n");
lcd_printf ("%s CPU at %s MHz\n",
- CONFIG_SYS_AT91_CPU_NAME,
+ ATMEL_CPU_NAME,
strmhz(temp, get_cpu_clk_rate()));
dram_size = 0;
@@ -243,6 +250,12 @@ void lcd_show_board_info(void)
#endif /* CONFIG_LCD_INFO */
#endif
+int board_early_init_f(void)
+{
+ at91_seriald_hw_init();
+ return 0;
+}
+
int board_init(void)
{
/* Enable Ctrlc */
@@ -254,10 +267,10 @@ int board_init(void)
#elif defined CONFIG_AT91SAM9G45EKES
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G45EKES;
#endif
+
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_serial_hw_init();
#ifdef CONFIG_CMD_NAND
at91sam9m10g45ek_nand_hw_init();
#endif
@@ -270,11 +283,9 @@ int board_init(void)
#ifdef CONFIG_ATMEL_SPI
at91_spi0_hw_init(1 << 4);
#endif
-
#ifdef CONFIG_MACB
at91sam9m10g45ek_macb_hw_init();
#endif
-
#ifdef CONFIG_LCD
at91sam9m10g45ek_lcd_hw_init();
#endif
@@ -283,8 +294,8 @@ int board_init(void)
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
return 0;
}
@@ -298,7 +309,7 @@ int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91SAM9G45_BASE_EMAC, 0x00);
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
#endif
return rc;
}
diff --git a/board/atmel/at91sam9m10g45ek/led.c b/board/atmel/at91sam9m10g45ek/led.c
index ff59a2d..dadbd6a 100644
--- a/board/atmel/at91sam9m10g45ek/led.c
+++ b/board/atmel/at91sam9m10g45ek/led.c
@@ -23,15 +23,17 @@
*/
#include <common.h>
+#include <asm/io.h>
#include <asm/arch/at91sam9g45.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
void coloured_LED_init(void)
{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9G45_ID_PIODE);
+ writel(1 << ATMEL_ID_PIODE, &pmc->pcer);
at91_set_gpio_output(CONFIG_RED_LED, 1);
at91_set_gpio_output(CONFIG_GREEN_LED, 1);
diff --git a/board/calao/sbc35_a9g20/sbc35_a9g20.c b/board/calao/sbc35_a9g20/sbc35_a9g20.c
index 9df45c0..5f448d9 100644
--- a/board/calao/sbc35_a9g20/sbc35_a9g20.c
+++ b/board/calao/sbc35_a9g20/sbc35_a9g20.c
@@ -26,15 +26,14 @@
*/
#include <common.h>
-#include <asm/arch/at91sam9260.h>
+#include <asm/io.h>
#include <asm/arch/at91sam9260_matrix.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
#include <net.h>
#endif
@@ -50,33 +49,36 @@ DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_CMD_NAND
static void sbc35_a9g20_nand_hw_init(void)
{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
unsigned long csa;
/* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
+ writel(csa, &matrix->ebicsa);
/* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
+ AT91_SMC_MODE_DBW_16 |
#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
+ AT91_SMC_MODE_DBW_8 |
#endif
- AT91_SMC_TDF_(2));
+ AT91_SMC_MODE_TDF_CYCLE(2),
+ &smc->cs[3].mode);
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+ writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
/* Configure RDY/BSY */
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
@@ -89,10 +91,13 @@ static void sbc35_a9g20_nand_hw_init(void)
#ifdef CONFIG_MACB
static void sbc35_a9g20_macb_hw_init(void)
{
- unsigned long rstc;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ struct at91_port *pioa = (struct at91_port *)ATMEL_BASE_PIOA;
+ struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
+ unsigned long erstl;
- /* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_EMAC);
+ /* Enable EMAC clock */
+ writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
/*
* Disable pull-up on:
@@ -111,24 +116,23 @@ static void sbc35_a9g20_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA25) |
pin_to_mask(AT91_PIN_PA26) |
pin_to_mask(AT91_PIN_PA28),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUDR);
+ &pioa->pudr);
- rstc = at91_sys_read(AT91_RSTC_MR) & AT91_RSTC_ERSTL;
+ erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
/* Need to reset PHY -> 500ms reset */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (AT91_RSTC_ERSTL & (0x0D << 8)) |
- AT91_RSTC_URSTEN);
+ writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(13) |
+ AT91_RSTC_MR_URSTEN, &rstc->mr);
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
+ writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
/* Wait for end hardware reset */
- while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
+ while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
+ ;
/* Restore NRST value */
- at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
- (rstc) |
- AT91_RSTC_URSTEN);
+ writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN,
+ &rstc->mr);
/* Re-enable pull-up */
writel(pin_to_mask(AT91_PIN_PA14) |
@@ -137,7 +141,7 @@ static void sbc35_a9g20_macb_hw_init(void)
pin_to_mask(AT91_PIN_PA25) |
pin_to_mask(AT91_PIN_PA26) |
pin_to_mask(AT91_PIN_PA28),
- pin_to_controller(AT91_PIN_PA0) + PIO_PUER);
+ &pioa->puer);
at91_macb_hw_init();
}
@@ -150,9 +154,9 @@ int board_init(void)
gd->bd->bi_arch_number = MACH_TYPE_SBC35_A9G20;
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_serial_hw_init();
+ at91_seriald_hw_init();
sbc35_a9g20_nand_hw_init();
#ifdef CONFIG_ATMEL_SPI
at91_spi0_hw_init(1 << 4 | 1 << 5);
@@ -166,11 +170,9 @@ int board_init(void)
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- if(get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) != PHYS_SDRAM_SIZE)
- return -1;
-
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ gd->ram_size = get_ram_size(
+ (void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
return 0;
}
@@ -184,7 +186,7 @@ int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91SAM9260_BASE_EMAC, 0x00);
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0x00);
#endif
return rc;
}
diff --git a/board/calao/tny_a9260/tny_a9260.c b/board/calao/tny_a9260/tny_a9260.c
index d51ca15..ab51a33 100644
--- a/board/calao/tny_a9260/tny_a9260.c
+++ b/board/calao/tny_a9260/tny_a9260.c
@@ -26,14 +26,12 @@
*/
#include <common.h>
-#include <asm/arch/at91sam9260.h>
#include <asm/arch/at91sam9_matrix.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/io.h>
#include <asm/arch/hardware.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -45,33 +43,36 @@ DECLARE_GLOBAL_DATA_PTR;
static void tny_a9260_nand_hw_init(void)
{
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
unsigned long csa;
- /* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ /* Assign CS3 to NAND/SmartMedia Interface */
+ csa = readl(&matrix->ebicsa);
+ csa |= AT91_MATRIX_CS3A_SMC_SMARTMEDIA;
+ writel(csa, &matrix->ebicsa);
/* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
+ AT91_SMC_MODE_DBW_16 |
#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
+ AT91_SMC_MODE_DBW_8 |
#endif
- AT91_SMC_TDF_(2));
+ AT91_SMC_MODE_TDF_CYCLE(2),
+ &smc->cs[3].mode);
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC);
+ writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
/* Configure RDY/BSY */
at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
@@ -91,9 +92,9 @@ int board_init(void)
gd->bd->bi_arch_number = MACH_TYPE_TNY_A9G20;
#endif
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_serial_hw_init();
+ at91_seriald_hw_init();
tny_a9260_nand_hw_init();
at91_spi0_hw_init(1 << 5);
return 0;
@@ -101,10 +102,8 @@ int board_init(void)
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- if(get_ram_size((long *) PHYS_SDRAM, PHYS_SDRAM_SIZE) != PHYS_SDRAM_SIZE)
- return -1;
-
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ gd->ram_size = get_ram_size(
+ (void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
return 0;
}
diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
index f82111b..420cd70 100644
--- a/board/cm_t35/cm_t35.c
+++ b/board/cm_t35/cm_t35.c
@@ -313,6 +313,14 @@ void set_muxconf_regs(void)
cm_t3730_set_muxconf();
}
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
+
/*
* Routine: setup_net_chip_gmpc
* Description: Setting up the configuration GPMC registers specific to the
diff --git a/board/cmc_pu2/Makefile b/board/cmc_pu2/Makefile
deleted file mode 100644
index a60f2e9..0000000
--- a/board/cmc_pu2/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := cmc_pu2.o flash.o load_sernum_ethaddr.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c
deleted file mode 100644
index 0ac851c..0000000
--- a/board/cmc_pu2/cmc_pu2.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Modified for CMC_PU2 (removed Smart Media support) by Gary Jennejohn
- * (2004) garyj@denx.de
- *
- * Modified for CMC_BASIC by Martin Krause (2005), TQ-Systems GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mach-types.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-#define CMC_HP_BASIC 1
-#define CMC_PU2 2
-#define CMC_BASIC 4
-
-int hw_detect (void);
-
-int board_init (void)
-{
- AT91PS_PIO piob = AT91C_BASE_PIOB;
- AT91PS_PIO pioc = AT91C_BASE_PIOC;
-
- /* Enable Ctrlc */
- console_init_f ();
-
- /* Correct IRDA resistor problem */
- /* Set PA23_TXD in Output */
- /* (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2; */
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* PIOB and PIOC clock enabling */
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOC;
-
- /*
- * configure PC0-PC3 as input without pull ups, so RS485 driver enable
- * (CMC-PU2) and digital outputs (CMC-BASIC) are deactivated.
- */
- pioc->PIO_ODR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
- AT91C_PIO_PC2 | AT91C_PIO_PC3;
- pioc->PIO_PPUDR = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
- AT91C_PIO_PC2 | AT91C_PIO_PC3;
- pioc->PIO_PER = AT91C_PIO_PC0 | AT91C_PIO_PC1 |
- AT91C_PIO_PC2 | AT91C_PIO_PC3;
-
- /*
- * On CMC-PU2 board configure PB3-PB6 to input without pull ups to
- * clear the duo LEDs (the external pull downs assure a proper
- * signal). On CMC-BASIC and CMC-HP-BASIC set PB3-PB6 to output and
- * drive it high, to configure current measurement on AINx.
- */
- if (hw_detect() & CMC_PU2) {
- piob->PIO_ODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- }
- else if ((hw_detect() & CMC_BASIC) || (hw_detect() & CMC_HP_BASIC)) {
- piob->PIO_SODR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- piob->PIO_OER = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- }
- piob->PIO_PPUDR = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
- piob->PIO_PER = AT91C_PIO_PB3 | AT91C_PIO_PB4 |
- AT91C_PIO_PB5 | AT91C_PIO_PB6;
-
- /*
- * arch number of CMC_PU2-Board. MACH_TYPE_CMC_PU2 is not supported in
- * the linuxarm kernel, yet.
- */
- /* gd->bd->bi_arch_number = MACH_TYPE_CMC_PU2; */
- gd->bd->bi_arch_number = 251;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-int checkboard (void)
-{
- if (hw_detect() & CMC_PU2)
- puts ("Board: CMC-PU2 (Rittal GmbH)\n");
- else if (hw_detect() & CMC_BASIC)
- puts ("Board: CMC-BASIC (Rittal GmbH)\n");
- else if (hw_detect() & CMC_HP_BASIC)
- puts ("Board: CMC-HP-BASIC (Rittal GmbH)\n");
- else
- puts ("Board: unknown\n");
- return 0;
-}
-
-int hw_detect (void)
-{
- AT91PS_PIO pio = AT91C_BASE_PIOB;
-
- /* PIOB clock enabling */
- *AT91C_PMC_PCER = 1 << AT91C_ID_PIOB;
-
- /* configure PB12 as input without pull up */
- pio->PIO_ODR = AT91C_PIO_PB12;
- pio->PIO_PPUDR = AT91C_PIO_PB12;
- pio->PIO_PER = AT91C_PIO_PB12;
-
- /* configure PB13 as input without pull up */
- pio->PIO_ODR = AT91C_PIO_PB13;
- pio->PIO_PPUDR = AT91C_PIO_PB13;
- pio->PIO_PER = AT91C_PIO_PB13;
-
- /* read board identification pin */
- if (pio->PIO_PDSR & AT91C_PIO_PB12)
- return ((pio->PIO_PDSR & AT91C_PIO_PB13)
- ? CMC_PU2 : 0);
- else
- return ((pio->PIO_PDSR & AT91C_PIO_PB13)
- ? CMC_HP_BASIC : CMC_BASIC);
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = dm9161_InitPhy;
- p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
- p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
- p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
diff --git a/board/cmc_pu2/config.mk b/board/cmc_pu2/config.mk
deleted file mode 100644
index cdb8a5f..0000000
--- a/board/cmc_pu2/config.mk
+++ /dev/null
@@ -1,3 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x20F00000
-## For testing: load at 0x20100000 and "go" at 0x201000A4
-#CONFIG_SYS_TEXT_BASE = 0x20100000
diff --git a/board/cmc_pu2/flash.c b/board/cmc_pu2/flash.c
deleted file mode 100644
index d10faab..0000000
--- a/board/cmc_pu2/flash.c
+++ /dev/null
@@ -1,469 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * Modified for the CMC PU2 by (C) Copyright 2004 Gary Jennejohn
- * garyj@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifndef CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#endif
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-#define FLASH_CYCLE1 0x0555
-#define FLASH_CYCLE2 0x02AA
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_short *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_amd(flash_info_t *info, vu_short *dest, ushort data);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
- unsigned long size = 0;
- ulong flashbase = CONFIG_SYS_FLASH_BASE;
-
- /* Init: no FLASHes known */
- memset(&flash_info[0], 0, sizeof(flash_info_t));
-
- flash_info[0].size = flash_get_size((vu_short *)flashbase, &flash_info[0]);
-
- size = flash_info[0].size;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
- /* monitor protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
- flash_get_info(CONFIG_SYS_MONITOR_BASE));
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- /* ENV protection ON by default */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
- flash_get_info(CONFIG_ENV_ADDR));
-#endif
-
- return size ? size : 1;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
- vu_short *base = (vu_short *)(info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = 0x00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = 0x00F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
- int i;
- flash_info_t * info;
-
- info = NULL;
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
- info = & flash_info[i];
- if (info->size && info->start[0] <= base &&
- base <= info->start[0] + info->size - 1)
- break;
- }
-
- return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_S29GL064M:
- printf ("S29GL064M-R6 (64Mbit, uniform sector size)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
- info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (vu_short *addr, flash_info_t *info)
-{
- int i;
- ushort value;
- ulong base = (ulong)addr;
-
- /* Write auto select command sequence */
- addr[FLASH_CYCLE1] = 0x00AA; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE2] = 0x0055; /* for AMD, Intel ignores this */
- addr[FLASH_CYCLE1] = 0x0090; /* selects Intel or AMD */
-
- /* read Manufacturer ID */
- udelay(100);
- value = addr[0];
- debug ("Manufacturer ID: %04X\n", value);
-
- switch (value) {
-
- case (AMD_MANUFACT & 0xFFFF):
- debug ("Manufacturer: AMD (Spansion)\n");
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (INTEL_MANUFACT & 0xFFFF):
- debug ("Manufacturer: Intel (not supported yet)\n");
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- printf ("Unknown Manufacturer ID: %04X\n", value);
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- goto out;
- }
-
- value = addr[1];
- debug ("Device ID: %04X\n", value);
-
- switch (addr[1]) {
-
- case (AMD_ID_MIRROR & 0xFFFF):
- debug ("Mirror Bit flash: addr[14] = %08X addr[15] = %08X\n",
- addr[14], addr[15]);
-
- switch(addr[14]) {
- case (AMD_ID_GL064M_2 & 0xFFFF):
- if (addr[15] != (AMD_ID_GL064M_3 & 0xffff)) {
- printf ("Chip: S29GLxxxM -> unknown\n");
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- } else {
- debug ("Chip: S29GL064M-R6\n");
- info->flash_id += FLASH_S29GL064M;
- info->sector_count = 128;
- info->size = 0x00800000;
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base;
- base += 0x10000;
- }
- }
- break; /* => 16 MB */
- default:
- printf ("Chip: *** unknown ***\n");
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
- break;
-
- default:
- printf ("Unknown Device ID: %04X\n", value);
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
-out:
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- vu_short *addr = (vu_short *)(info->start[0]);
- int flag, prot, sect, ssect, l_sect;
- ulong now, last, start;
-
- debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if ((info->flash_id == FLASH_UNKNOWN) ||
- (info->flash_id > FLASH_AMD_COMP)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /*
- * Start erase on unprotected sectors.
- * Since the flash can erase multiple sectors with one command
- * we take advantage of that by doing the erase in chunks of
- * 3 sectors.
- */
- for (sect = s_first; sect <= s_last; ) {
- l_sect = -1;
-
- addr[FLASH_CYCLE1] = 0x00AA;
- addr[FLASH_CYCLE2] = 0x0055;
- addr[FLASH_CYCLE1] = 0x0080;
- addr[FLASH_CYCLE1] = 0x00AA;
- addr[FLASH_CYCLE2] = 0x0055;
-
- /* do the erase in chunks of at most 3 sectors */
- for (ssect = 0; ssect < 3; ssect++) {
- if ((sect + ssect) > s_last)
- break;
- if (info->protect[sect + ssect] == 0) { /* not protected */
- addr = (vu_short *)(info->start[sect + ssect]);
- addr[0] = 0x0030;
- l_sect = sect + ssect;
- }
- }
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
-
- start = get_timer(0);
- last = 0;
- addr = (vu_short *)(info->start[l_sect]);
- while ((addr[0] & 0x0080) != 0x0080) {
- if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return 1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- addr = (vu_short *)info->start[0];
- addr[0] = 0x00F0; /* reset bank */
- sect += ssect;
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
-DONE:
- /* reset to read mode */
- addr = (vu_short *)info->start[0];
- addr[0] = 0x00F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong wp, data;
- int rc;
-
- if (addr & 1) {
- printf ("unaligned destination not supported\n");
- return ERR_ALIGN;
- };
-
- if ((int) src & 1) {
- printf ("unaligned source not supported\n");
- return ERR_ALIGN;
- };
-
- wp = addr;
-
- while (cnt >= 2) {
- data = *((vu_short *)src);
- if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) {
-printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- return (ERR_OK);
- }
-
- if (cnt == 1) {
- data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << 8);
- if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) {
-printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
- return (rc);
- }
- src += 1;
- wp += 1;
- cnt -= 1;
- }
-
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data)
-{
- int flag;
- vu_short *base; /* first address in flash bank */
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- base = (vu_short *)(info->start[0]);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- base[FLASH_CYCLE1] = 0x00AA; /* unlock */
- base[FLASH_CYCLE2] = 0x0055; /* unlock */
- base[FLASH_CYCLE1] = 0x00A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- /* data polling for D7 */
- while ((*dest & 0x0080) != (data & 0x0080)) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = 0x00F0; /* reset bank */
- return (1);
- }
- }
- return (0);
-}
diff --git a/board/cmc_pu2/load_sernum_ethaddr.c b/board/cmc_pu2/load_sernum_ethaddr.c
deleted file mode 100644
index 6f85dd9..0000000
--- a/board/cmc_pu2/load_sernum_ethaddr.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2005
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <net.h>
-
-#define I2C_CHIP 0x50 /* I2C bus address of onboard EEPROM */
-#define I2C_ALEN 1 /* length of EEPROM addresses in bytes */
-#define I2C_OFFSET 0x0 /* start address of manufacturere data block
- * in EEPROM */
-
-/* 64 Byte manufacturer data block in EEPROM */
-struct manufacturer_data {
- unsigned int serial_number; /* serial number (0...999999) */
- unsigned short hardware; /* hardware version (e.g. V1.02) */
- unsigned short manuf_date; /* manufacture date (e.g. 25/02) */
- unsigned char name[20]; /* device name (in CHIP.INI) */
- unsigned char macadr[6]; /* MAC address */
- signed char a_kal[4]; /* calibration value for U */
- signed char i_kal[4]; /* calibration value for I */
- unsigned char reserve[18]; /* reserved */
- unsigned short save_nr; /* save count */
- unsigned short chksum; /* checksum */
-};
-
-
-int i2c_read (unsigned char chip, unsigned int addr, int alen,
- unsigned char *buffer, int len);
-
-/*-----------------------------------------------------------------------
- * Process manufacturer data block in EEPROM:
- *
- * If we boot on a system fresh from factory, check if the manufacturer data
- * in the EEPROM is valid and save some information it contains.
- *
- * CMC manufacturer data is defined as follows:
- *
- * - located in the onboard EEPROM
- * - starts at offset 0x0
- * - size 0x00000040
- *
- * Internal structure: see struct definition
- */
-
-int misc_init_r(void)
-{
- struct manufacturer_data data;
- char serial [9];
- unsigned short chksum;
- unsigned char *p;
- unsigned short i;
-
-#if !defined(CONFIG_HARD_I2C) && !defined(CONFIG_SOFT_I2C)
-#error you must define some I2C support (CONFIG_HARD_I2C or CONFIG_SOFT_I2C)
-#endif
- if (i2c_read(I2C_CHIP, I2C_OFFSET, I2C_ALEN, (unsigned char *)&data,
- sizeof(data)) != 0) {
- puts ("Error reading manufacturer data from EEPROM\n");
- return -1;
- }
-
- /* check if manufacturer data block is valid */
- p = (unsigned char *)&data;
- chksum = 0;
- for (i = 0; i < (sizeof(data) - sizeof(data.chksum)); i++)
- chksum += *p++;
-
- debug ("checksum of manufacturer data block: %#.4x\n", chksum);
-
- if (chksum != data.chksum) {
- puts ("Error: manufacturer data block has invalid checksum\n");
- return -1;
- }
-
- /* copy serial number */
- sprintf (serial, "%d", data.serial_number);
-
- /* set serial# and ethaddr if not yet defined */
- if (getenv("serial#") == NULL) {
- setenv ("serial#", serial);
- }
-
- if (getenv("ethaddr") == NULL) {
- eth_setenv_enetaddr("ethaddr", data.macadr);
- }
-
- return 0;
-}
diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c
index 0062f12..a7071cd 100644
--- a/board/comelit/dig297/dig297.c
+++ b/board/comelit/dig297/dig297.c
@@ -37,6 +37,7 @@
#include <netdev.h>
#include <twl4030.h>
#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/omap3-regs.h>
#include <asm/arch/mux.h>
#include <asm/arch/mem.h>
@@ -145,6 +146,14 @@ void set_muxconf_regs(void)
MUX_DIG297();
}
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
+
#ifdef CONFIG_CMD_NET
/*
* Routine: setup_net_chip
diff --git a/board/csb637/Makefile b/board/csb637/Makefile
deleted file mode 100644
index a5484ae..0000000
--- a/board/csb637/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := csb637.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/csb637/config.mk b/board/csb637/config.mk
deleted file mode 100644
index e2cc8a6..0000000
--- a/board/csb637/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x23fc0000
diff --git a/board/csb637/csb637.c b/board/csb637/csb637.c
deleted file mode 100644
index d7fdcc4..0000000
--- a/board/csb637/csb637.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de>
- * Anders Larsen <alarsen@rea.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-#include <netdev.h>
-#include <asm/io.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <bcm5221.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* Enable Ctrlc */
- console_init_f ();
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- /* arch number of CSB637-Board */
- gd->bd->bi_arch_number = MACH_TYPE_CSB637;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = bcm5221_InitPhy;
- p_phyops->IsPhyConnected = bcm5221_IsPhyConnected;
- p_phyops->GetLinkSpeed = bcm5221_GetLinkSpeed;
- p_phyops->AutoNegotiate = bcm5221_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c
deleted file mode 100644
index 096ebbd..0000000
--- a/board/dave/B2/B2.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2004
- * DAVE Srl
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info@wawnet.biz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialization
- */
-
-int board_init (void)
-{
- u32 temp;
-
- /* Configuration Port Control Register*/
- /* Port A */
- PCONA = 0x3ff;
-
- /* Port B */
- PCONB = 0xff;
- PDATB = 0xFFFF;
-
- /* Port C */
- /*
- PCONC = 0xff55ff15;
- PDATC = 0x0;
- PUPC = 0xffff;
- */
-
- /* Port D */
- /*
- PCOND = 0xaaaa;
- PUPD = 0xff;
- */
-
- /* Port E */
- PCONE = 0x0001aaa9;
- PDATE = 0x0;
- PUPE = 0xff;
-
- /* Port F */
- PCONF = 0x124955;
- PDATF = 0xff; /* B2-eth_reset tied high level */
- /*
- PUPF = 0x1e3;
- */
-
- /* Port G */
- PUPG = 0x1;
- PCONG = 0x3; /*PG0= EINT0= ETH_INT prepared for linux kernel*/
-
- INTMSK = 0x03fffeff;
- INTCON = 0x05;
-
- /*
- Configure chip ethernet interrupt as High level
- Port G EINT 0-7 EINT0 -> CHIP ETHERNET
- */
- temp = EXTINT;
- temp &= ~0x7;
- temp |= 0x1; /*LEVEL_HIGH*/
- EXTINT = temp;
-
- /*
- Reset SMSC LAN91C96 chip
- */
- temp= PCONF;
- temp |= 0x00000040;
- PCONF = temp;
-
- /* Reset high */
- temp = PDATF;
- temp |= (1 << 3);
- PDATF = temp;
-
- /* Short delay */
- for (temp=0;temp<10;temp++)
- {
- /* NOP */
- }
-
- /* Reset low */
- temp = PDATF;
- temp &= ~(1 << 3);
- PDATF = temp;
-
- /* arch number MACH_TYPE_MBA44B0 */
- gd->bd->bi_arch_number = MACH_TYPE_S3C44B0;
-
- /* location of boot parameters */
- gd->bd->bi_boot_params = 0x0c000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/dave/B2/Makefile b/board/dave/B2/Makefile
deleted file mode 100644
index b981579..0000000
--- a/board/dave/B2/Makefile
+++ /dev/null
@@ -1,55 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := B2.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/dave/B2/config.mk b/board/dave/B2/config.mk
deleted file mode 100644
index f7b686a..0000000
--- a/board/dave/B2/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CONFIG_SYS_TEXT_BASE = 0x0C100000
-
-PLATFORM_CPPFLAGS += -Uarm
diff --git a/board/dave/B2/flash.c b/board/dave/B2/flash.c
deleted file mode 100644
index bb892e6..0000000
--- a/board/dave/B2/flash.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-#ifdef __DEBUG_START_FROM_SRAM__
- return CONFIG_SYS_DUMMY_FLASH_SIZE;
-#else
- unsigned long size_b0;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Setup offsets */
- flash_get_offsets (0, &flash_info[0]);
-
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- -CONFIG_SYS_MONITOR_LEN,
- 0xffffffff,
- &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
- return (size_b0);
-#endif
-}
diff --git a/board/dave/B2/lowlevel_init.S b/board/dave/B2/lowlevel_init.S
deleted file mode 100644
index 2f3a364..0000000
--- a/board/dave/B2/lowlevel_init.S
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * (C) Copyright 2004
- * DAVE Srl
- *
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info@wawnet.biz
- *
- * memsetup-sa1110.S (blob): memory setup for various SA1110 architectures
- * Modified By MATTO
- *
- * Copyright (C) 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-/*
- * Documentation:
- * Intel Corporation, "Intel StrongARM SA-1110 Microprocessor
- * Advanced Developer's manual, December 1999
- *
- * Intel has a very hard to find SDRAM configurator on their web site:
- * http://appzone.intel.com/hcd/sa1110/memory/index.asp
- *
- * NOTE: This code assumes that an SA1110 CPU *always* uses SDRAM. This
- * appears to be true, but it might be possible that somebody designs a
- * board with mixed EDODRAM/SDRAM memory (which is a bad idea). -- Erik
- *
- * 04-10-2001: SELETZ
- * - separated memory config for multiple platform support
- * - perform SA1110 Hardware Reset Procedure
- *
- */
-
-.equ B0_Tacs, 0x0 /* 0clk */
-.equ B0_Tcos, 0x0 /* 0clk */
-.equ B0_Tacc, 0x4 /* 6clk */
-.equ B0_Tcoh, 0x0 /* 0clk */
-.equ B0_Tah, 0x0 /* 0clk */
-.equ B0_Tacp, 0x0 /* 0clk */
-.equ B0_PMC, 0x0 /* normal(1data) */
-/* Bank 1 parameter */
-.equ B1_Tacs, 0x3 /* 4clk */
-.equ B1_Tcos, 0x3 /* 4clk */
-.equ B1_Tacc, 0x7 /* 14clkv */
-.equ B1_Tcoh, 0x3 /* 4clk */
-.equ B1_Tah, 0x3 /* 4clk */
-.equ B1_Tacp, 0x3 /* 6clk */
-.equ B1_PMC, 0x0 /* normal(1data) */
-
-/* Bank 2 parameter - LAN91C96 */
-.equ B2_Tacs, 0x3 /* 4clk */
-.equ B2_Tcos, 0x3 /* 4clk */
-.equ B2_Tacc, 0x7 /* 14clk */
-.equ B2_Tcoh, 0x3 /* 4clk */
-.equ B2_Tah, 0x3 /* 4clk */
-.equ B2_Tacp, 0x3 /* 6clk */
-.equ B2_PMC, 0x0 /* normal(1data) */
-
-/* Bank 3 parameter */
-.equ B3_Tacs, 0x3 /* 4clk */
-.equ B3_Tcos, 0x3 /* 4clk */
-.equ B3_Tacc, 0x7 /* 14clk */
-.equ B3_Tcoh, 0x3 /* 4clk */
-.equ B3_Tah, 0x3 /* 4clk */
-.equ B3_Tacp, 0x3 /* 6clk */
-.equ B3_PMC, 0x0 /* normal(1data) */
-
-/* Bank 4 parameter */
-.equ B4_Tacs, 0x3 /* 4clk */
-.equ B4_Tcos, 0x3 /* 4clk */
-.equ B4_Tacc, 0x7 /* 14clk */
-.equ B4_Tcoh, 0x3 /* 4clk */
-.equ B4_Tah, 0x3 /* 4clk */
-.equ B4_Tacp, 0x3 /* 6clk */
-.equ B4_PMC, 0x0 /* normal(1data) */
-
-/* Bank 5 parameter */
-.equ B5_Tacs, 0x3 /* 4clk */
-.equ B5_Tcos, 0x3 /* 4clk */
-.equ B5_Tacc, 0x7 /* 14clk */
-.equ B5_Tcoh, 0x3 /* 4clk */
-.equ B5_Tah, 0x3 /* 4clk */
-.equ B5_Tacp, 0x3 /* 6clk */
-.equ B5_PMC, 0x0 /* normal(1data) */
-
-/* Bank 6(if SROM) parameter */
-.equ B6_Tacs, 0x3 /* 4clk */
-.equ B6_Tcos, 0x3 /* 4clk */
-.equ B6_Tacc, 0x7 /* 14clk */
-.equ B6_Tcoh, 0x3 /* 4clk */
-.equ B6_Tah, 0x3 /* 4clk */
-.equ B6_Tacp, 0x3 /* 6clk */
-.equ B6_PMC, 0x0 /* normal(1data) */
-
-/* Bank 7(if SROM) parameter */
-.equ B7_Tacs, 0x3 /* 4clk */
-.equ B7_Tcos, 0x3 /* 4clk */
-.equ B7_Tacc, 0x7 /* 14clk */
-.equ B7_Tcoh, 0x3 /* 4clk */
-.equ B7_Tah, 0x3 /* 4clk */
-.equ B7_Tacp, 0x3 /* 6clk */
-.equ B7_PMC, 0x0 /* normal(1data) */
-
-/* Bank 6 parameter */
-.equ B6_MT, 0x3 /* SDRAM */
-.equ B6_Trcd, 0x0 /* 2clk */
-.equ B6_SCAN, 0x0 /* 10bit */
-
-.equ B7_MT, 0x3 /* SDRAM */
-.equ B7_Trcd, 0x0 /* 2clk */
-.equ B7_SCAN, 0x0 /* 10bit */
-
-
-/* REFRESH parameter */
-.equ REFEN, 0x1 /* Refresh enable */
-.equ TREFMD, 0x0 /* CBR(CAS before RAS)/Auto refresh */
-.equ Trp, 0x0 /* 2clk */
-.equ Trc, 0x3 /* 0x1=5clk 0x3=11clk*/
-.equ Tchr, 0x0 /* 0x2=3clk 0x0=0clks */
-.equ REFCNT, 879
-
-MEMORY_CONFIG:
- .long 0x12111900 /* Bank0 = OM[1:0] , Bank1-7 16bit, Bank2=Nowait,UB/LB*/
- .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /*GCS0*/
- .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /*GCS1*/
- .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /*GCS2*/
- .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /*GCS3*/
- .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /*GCS4*/
- .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /*GCS5*/
- .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /*GCS6*/
- .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /*GCS7*/
- .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT) /*REFRESH RFEN=1, TREFMD=0, trp=3clk, trc=5clk, tchr=3clk,count=1019*/
- .word 0x17 /*SCLK power down mode, BANKSIZE 16M/16M*/
- .word 0x20 /*MRSR6 CL=2clk*/
- .word 0x20 /*MRSR7*/
-
-
-.globl lowlevel_init
-lowlevel_init:
-
- /*
- the next instruction fail due memory relocation...
- we'll find the right MEMORY_CONFIG address with the next 3 lines...
- */
- /*ldr r0, =MEMORY_CONFIG*/
- mov r0, pc
- ldr r1, =(0x38+4)
- sub r0, r0, r1
-
- ldmia r0, {r1-r13}
- ldr r0, =0x01c80000
- stmia r0, {r1-r13}
- mov pc, lr
diff --git a/board/davedenx/qong/fpga.c b/board/davedenx/qong/fpga.c
index 789acf0..6536a0b 100644
--- a/board/davedenx/qong/fpga.c
+++ b/board/davedenx/qong/fpga.c
@@ -25,7 +25,7 @@
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
#include <fpga.h>
#include <lattice.h>
#include "qong_fpga.h"
@@ -41,22 +41,22 @@ static void qong_jtag_init(void)
static void qong_fpga_jtag_set_tdi(int value)
{
- mxc_gpio_set(QONG_FPGA_TDI_PIN, value);
+ gpio_set_value(QONG_FPGA_TDI_PIN, value);
}
static void qong_fpga_jtag_set_tms(int value)
{
- mxc_gpio_set(QONG_FPGA_TMS_PIN, value);
+ gpio_set_value(QONG_FPGA_TMS_PIN, value);
}
static void qong_fpga_jtag_set_tck(int value)
{
- mxc_gpio_set(QONG_FPGA_TCK_PIN, value);
+ gpio_set_value(QONG_FPGA_TCK_PIN, value);
}
static int qong_fpga_jtag_get_tdo(void)
{
- return mxc_gpio_get(QONG_FPGA_TDO_PIN);
+ return gpio_get_value(QONG_FPGA_TDO_PIN);
}
lattice_board_specific_func qong_fpga_fns = {
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index ec22627..99432ed 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -28,7 +28,7 @@
#include <asm/io.h>
#include <nand.h>
#include <fsl_pmic.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
#include "qong_fpga.h"
#include <watchdog.h>
@@ -51,9 +51,9 @@ int dram_init (void)
static void qong_fpga_reset(void)
{
- mxc_gpio_set(QONG_FPGA_RST_PIN, 0);
+ gpio_set_value(QONG_FPGA_RST_PIN, 0);
udelay(30);
- mxc_gpio_set(QONG_FPGA_RST_PIN, 1);
+ gpio_set_value(QONG_FPGA_RST_PIN, 1);
udelay(300);
}
@@ -76,21 +76,20 @@ int board_early_init_f (void)
/* FPGA reset Pin */
/* rstn = 0 */
- mxc_gpio_set(QONG_FPGA_RST_PIN, 0);
- mxc_gpio_direction(QONG_FPGA_RST_PIN, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(QONG_FPGA_RST_PIN, 0);
/* set interrupt pin as input */
- mxc_gpio_direction(QONG_FPGA_IRQ_PIN, MXC_GPIO_DIRECTION_IN);
+ gpio_direction_input(QONG_FPGA_IRQ_PIN);
/* FPGA JTAG Interface */
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SFS6, MUX_CTL_GPIO));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SCK6, MUX_CTL_GPIO));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_CAPTURE, MUX_CTL_GPIO));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_COMPARE, MUX_CTL_GPIO));
- mxc_gpio_direction(QONG_FPGA_TCK_PIN, MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_direction(QONG_FPGA_TMS_PIN, MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_direction(QONG_FPGA_TDI_PIN, MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_direction(QONG_FPGA_TDO_PIN, MXC_GPIO_DIRECTION_IN);
+ gpio_direction_output(QONG_FPGA_TCK_PIN, 0);
+ gpio_direction_output(QONG_FPGA_TMS_PIN, 0);
+ gpio_direction_output(QONG_FPGA_TDI_PIN, 0);
+ gpio_direction_input(QONG_FPGA_TDO_PIN);
#endif
/* setup pins for UART1 */
@@ -263,27 +262,26 @@ static void board_nand_setup(void)
qong_fpga_reset();
/* Enable NAND flash */
- mxc_gpio_set(15, 1);
- mxc_gpio_set(14, 1);
- mxc_gpio_direction(15, MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_direction(16, MXC_GPIO_DIRECTION_IN);
- mxc_gpio_direction(14, MXC_GPIO_DIRECTION_IN);
- mxc_gpio_set(15, 0);
+ gpio_set_value(15, 1);
+ gpio_set_value(14, 1);
+ gpio_direction_output(15, 0);
+ gpio_direction_input(16);
+ gpio_direction_input(14);
}
int qong_nand_rdy(void *chip)
{
udelay(1);
- return mxc_gpio_get(16);
+ return gpio_get_value(16);
}
void qong_nand_select_chip(struct mtd_info *mtd, int chip)
{
if (chip >= 0)
- mxc_gpio_set(15, 0);
+ gpio_set_value(15, 0);
else
- mxc_gpio_set(15, 1);
+ gpio_set_value(15, 1);
}
diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index 73eaa48..2f950e7 100644
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -30,6 +30,7 @@
#include <asm/arch/emac_defs.h>
#include <asm/io.h>
#include <asm/arch/davinci_misc.h>
+#include <hwconfig.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -105,6 +106,57 @@ const struct pinmux_config nand_pins[] = {
{ pinmux(12), 1, 5 },
{ pinmux(12), 1, 6 }
};
+#elif defined(CONFIG_USE_NOR)
+/* NOR pin muxer settings */
+const struct pinmux_config nor_pins[] = {
+ /* GP0[11] is required for NOR to work on Rev 3 EVMs */
+ { pinmux(0), 8, 4 }, /* GP0[11] */
+ { pinmux(5), 1, 6 },
+ { pinmux(6), 1, 6 },
+ { pinmux(7), 1, 0 },
+ { pinmux(7), 1, 4 },
+ { pinmux(7), 1, 5 },
+ { pinmux(8), 1, 0 },
+ { pinmux(8), 1, 1 },
+ { pinmux(8), 1, 2 },
+ { pinmux(8), 1, 3 },
+ { pinmux(8), 1, 4 },
+ { pinmux(8), 1, 5 },
+ { pinmux(8), 1, 6 },
+ { pinmux(8), 1, 7 },
+ { pinmux(9), 1, 0 },
+ { pinmux(9), 1, 1 },
+ { pinmux(9), 1, 2 },
+ { pinmux(9), 1, 3 },
+ { pinmux(9), 1, 4 },
+ { pinmux(9), 1, 5 },
+ { pinmux(9), 1, 6 },
+ { pinmux(9), 1, 7 },
+ { pinmux(10), 1, 0 },
+ { pinmux(10), 1, 1 },
+ { pinmux(10), 1, 2 },
+ { pinmux(10), 1, 3 },
+ { pinmux(10), 1, 4 },
+ { pinmux(10), 1, 5 },
+ { pinmux(10), 1, 6 },
+ { pinmux(10), 1, 7 },
+ { pinmux(11), 1, 0 },
+ { pinmux(11), 1, 1 },
+ { pinmux(11), 1, 2 },
+ { pinmux(11), 1, 3 },
+ { pinmux(11), 1, 4 },
+ { pinmux(11), 1, 5 },
+ { pinmux(11), 1, 6 },
+ { pinmux(11), 1, 7 },
+ { pinmux(12), 1, 0 },
+ { pinmux(12), 1, 1 },
+ { pinmux(12), 1, 2 },
+ { pinmux(12), 1, 3 },
+ { pinmux(12), 1, 4 },
+ { pinmux(12), 1, 5 },
+ { pinmux(12), 1, 6 },
+ { pinmux(12), 1, 7 }
+};
#endif
#ifdef CONFIG_DRIVER_TI_EMAC_USE_RMII
@@ -114,6 +166,64 @@ const struct pinmux_config nand_pins[] = {
#endif
#endif /* CONFIG_DRIVER_TI_EMAC */
+void dsp_lpsc_on(unsigned domain, unsigned int id)
+{
+ dv_reg_p mdstat, mdctl, ptstat, ptcmd;
+ struct davinci_psc_regs *psc_regs;
+
+ psc_regs = davinci_psc0_regs;
+ mdstat = &psc_regs->psc0.mdstat[id];
+ mdctl = &psc_regs->psc0.mdctl[id];
+ ptstat = &psc_regs->ptstat;
+ ptcmd = &psc_regs->ptcmd;
+
+ while (*ptstat & (0x1 << domain))
+ ;
+
+ if ((*mdstat & 0x1f) == 0x03)
+ return; /* Already on and enabled */
+
+ *mdctl |= 0x03;
+
+ *ptcmd = 0x1 << domain;
+
+ while (*ptstat & (0x1 << domain))
+ ;
+ while ((*mdstat & 0x1f) != 0x03)
+ ; /* Probably an overkill... */
+}
+
+static void dspwake(void)
+{
+ unsigned *resetvect = (unsigned *)DAVINCI_L3CBARAM_BASE;
+ u32 val;
+
+ /* if the device is ARM only, return */
+ if ((readl(CHIP_REV_ID_REG) & 0x3f) == 0x10)
+ return;
+
+ if (hwconfig_subarg_cmp_f("dsp", "wake", "no", NULL))
+ return;
+
+ *resetvect++ = 0x1E000; /* DSP Idle */
+ /* clear out the next 10 words as NOP */
+ memset(resetvect, 0, sizeof(unsigned) *10);
+
+ /* setup the DSP reset vector */
+ writel(DAVINCI_L3CBARAM_BASE, HOST1CFG);
+
+ dsp_lpsc_on(1, DAVINCI_LPSC_GEM);
+ val = readl(PSC0_MDCTL + (15 * 4));
+ val |= 0x100;
+ writel(val, (PSC0_MDCTL + (15 * 4)));
+}
+
+int misc_init_r(void)
+{
+ dspwake();
+ return 0;
+}
+
static const struct pinmux_resource pinmuxes[] = {
#ifdef CONFIG_SPI_FLASH
PINMUX_ITEM(spi1_pins),
@@ -122,6 +232,8 @@ static const struct pinmux_resource pinmuxes[] = {
PINMUX_ITEM(i2c_pins),
#ifdef CONFIG_NAND_DAVINCI
PINMUX_ITEM(nand_pins),
+#elif defined(CONFIG_USE_NOR)
+ PINMUX_ITEM(nor_pins),
#endif
};
@@ -168,6 +280,7 @@ u32 get_board_rev(void)
int board_init(void)
{
+ u32 val;
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
@@ -215,6 +328,16 @@ int board_init(void)
if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
return 1;
+#ifdef CONFIG_USE_NOR
+ /* Set the GPIO direction as output */
+ clrbits_be32((u32 *)GPIO_BANK0_REG_DIR_ADDR, (0x01 << 11));
+
+ /* Set the output as low */
+ val = readl(GPIO_BANK0_REG_SET_ADDR);
+ val |= (0x01 << 11);
+ writel(val, GPIO_BANK0_REG_CLR_ADDR);
+#endif
+
#ifdef CONFIG_DRIVER_TI_EMAC
if (davinci_configure_pin_mux(emac_pins, ARRAY_SIZE(emac_pins)) != 0)
return 1;
diff --git a/board/edb93xx/Makefile b/board/edb93xx/Makefile
deleted file mode 100644
index dcaed06..0000000
--- a/board/edb93xx/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := edb93xx.o flash_cfg.o pll_cfg.o sdram_cfg.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/edb93xx/config.mk b/board/edb93xx/config.mk
deleted file mode 100644
index fab59ef..0000000
--- a/board/edb93xx/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-LDSCRIPT := $(SRCTREE)/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
-
-ifdef CONFIG_EDB9301
-CONFIG_SYS_TEXT_BASE = 0x05700000
-endif
-
-ifdef CONFIG_EDB9302
-CONFIG_SYS_TEXT_BASE = 0x05700000
-endif
-
-ifdef CONFIG_EDB9302A
-CONFIG_SYS_TEXT_BASE = 0xc5700000
-endif
-
-ifdef CONFIG_EDB9307
-CONFIG_SYS_TEXT_BASE = 0x01f00000
-endif
-
-ifdef CONFIG_EDB9307A
-CONFIG_SYS_TEXT_BASE = 0xc1f00000
-endif
-
-ifdef CONFIG_EDB9312
-CONFIG_SYS_TEXT_BASE = 0x01f00000
-endif
-
-ifdef CONFIG_EDB9315
-CONFIG_SYS_TEXT_BASE = 0x01f00000
-endif
-
-ifdef CONFIG_EDB9315A
-CONFIG_SYS_TEXT_BASE = 0xc1f00000
-endif
diff --git a/board/edb93xx/edb93xx.c b/board/edb93xx/edb93xx.c
deleted file mode 100644
index dde30ff..0000000
--- a/board/edb93xx/edb93xx.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * (C) Copyright 2002 2003
- * Network Audio Technologies, Inc. <www.netaudiotech.com>
- * Adam Bezanson <bezanson@netaudiotech.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/ep93xx.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define MAX_BANK_SIZE 0x04000000 /* 64 MB */
-
-static ulong const bank_addr[CONFIG_NR_DRAM_BANKS] = {
- PHYS_SDRAM_1,
-#ifdef PHYS_SDRAM_2
- PHYS_SDRAM_2,
-#endif
-#ifdef PHYS_SDRAM_3
- PHYS_SDRAM_3,
-#endif
-#ifdef PHYS_SDRAM_4
- PHYS_SDRAM_4
-#endif
-};
-
-int board_init(void)
-{
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
- icache_enable();
-
-#ifdef USE_920T_MMU
- dcache_enable();
-#endif
-
- /*
- * set UARTBAUD bit to drive UARTs with 14.7456MHz instead of
- * 14.7456/2 MHz
- */
- uint32_t value = readl(&syscon->pwrcnt);
- value |= SYSCON_PWRCNT_UART_BAUD;
- writel(value, &syscon->pwrcnt);
-
- /* Enable the uart in devicecfg */
- value = readl(&syscon->devicecfg);
- value |= 1<<18 /* U1EN */;
- writel(0xAA, &syscon->sysswlock);
- writel(value, &syscon->devicecfg);
-
- /* Machine number, as defined in linux/arch/arm/tools/mach-types */
- gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
-
- /* We have a console */
- gd->have_console = 1;
-
- return 0;
-}
-
-int board_eth_init(bd_t *bd)
-{
- return ep93xx_eth_initialize(0, MAC_BASE);
-}
-
-int dram_init(void)
-{
- unsigned int *src, *dst;
- int i;
-
- for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
- const ulong bank_size = get_ram_size((long *)bank_addr[i],
- MAX_BANK_SIZE);
- if (bank_size) {
- gd->bd->bi_dram[i].start = bank_addr[i];
- gd->bd->bi_dram[i].size = bank_size;
- }
- }
-
- /* copy exception vectors */
- src = (unsigned int *)_armboot_start;
- dst = (unsigned int *)PHYS_SDRAM_1;
- memcpy(dst, src, 16 * sizeof(unsigned int));
-
- return 0;
-}
diff --git a/board/edb93xx/pll_cfg.c b/board/edb93xx/pll_cfg.c
deleted file mode 100644
index a687af0..0000000
--- a/board/edb93xx/pll_cfg.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * PLL setup for Cirrus edb93xx boards
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include "pll_cfg.h"
-#include "early_udelay.h"
-
-void pll_cfg(void)
-{
- struct syscon_regs *syscon = (struct syscon_regs *)SYSCON_BASE;
-
- /* setup PLL1 */
- writel(CLKSET1_VAL, &syscon->clkset1);
-
- /*
- * flush the pipeline
- * writing to CLKSET1 causes the EP93xx to enter standby for between
- * 8 ms to 16 ms, until PLL1 stabilizes
- */
- asm("nop");
- asm("nop");
- asm("nop");
- asm("nop");
- asm("nop");
-
- /* setup PLL2 */
- writel(CLKSET2_VAL, &syscon->clkset2);
-
- /*
- * the user's guide recommends to wait at least 1 ms for PLL2 to
- * stabilize
- */
- early_udelay(1000);
-}
diff --git a/board/edb93xx/pll_cfg.h b/board/edb93xx/pll_cfg.h
deleted file mode 100644
index 0b6f469..0000000
--- a/board/edb93xx/pll_cfg.h
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * PLL register values for Cirrus edb93xx boards
- *
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/ep93xx.h>
-
-#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
- defined(CONFIG_EDB9302A)
-/*
- * fclk_div: 2, nbyp1: 1, hclk_div: 5, pclk_div: 2
- * pll1_x1: 294912000.000000, pll1_x2ip: 36864000.000000,
- * pll1_x2: 331776000.000000, pll1_out: 331776000.000000
- */
-#define CLKSET1_VAL (7 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
- 8 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
- 19 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
- 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \
- 3 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \
- SYSCON_CLKSET1_NBYP1 | \
- 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT)
-#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \
- defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \
- defined(CONFIG_EDB9315A)
-/*
- * fclk_div: 2, nbyp1: 1, hclk_div: 4, pclk_div: 2
- * pll1_x1: 3096576000.000000, pll1_x2ip: 129024000.000000,
- * pll1_x2: 3999744000.000000, pll1_out: 1999872000.000000
- */
-#define CLKSET1_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
- 30 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
- 20 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
- 1 << SYSCON_CLKSET1_PCLK_DIV_SHIFT | \
- 2 << SYSCON_CLKSET1_HCLK_DIV_SHIFT | \
- SYSCON_CLKSET1_NBYP1 | \
- 1 << SYSCON_CLKSET1_FCLK_DIV_SHIFT)
-#else
-#error "Undefined board"
-#endif
-
-/*
- * usb_div: 4, nbyp2: 1, pll2_en: 1
- * pll2_x1: 368640000.000000, pll2_x2ip: 15360000.000000,
- * pll2_x2: 384000000.000000, pll2_out: 192000000.000000
- */
-#define CLKSET2_VAL (23 << SYSCON_CLKSET_PLL_X2IPD_SHIFT | \
- 24 << SYSCON_CLKSET_PLL_X2FBD2_SHIFT | \
- 24 << SYSCON_CLKSET_PLL_X1FBD1_SHIFT | \
- 1 << SYSCON_CLKSET_PLL_PS_SHIFT | \
- SYSCON_CLKSET2_PLL2_EN | \
- SYSCON_CLKSET2_NBYP2 | \
- 3 << SYSCON_CLKSET2_USB_DIV_SHIFT)
diff --git a/board/edb93xx/sdram_cfg.c b/board/edb93xx/sdram_cfg.c
deleted file mode 100644
index 440ad11..0000000
--- a/board/edb93xx/sdram_cfg.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) 2009, 2010 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm/io.h>
-#include "sdram_cfg.h"
-#include "early_udelay.h"
-
-#define PROGRAM_MODE_REG(bank) (*(volatile uint32_t *) \
- (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank | SDRAM_MODE_REG_VAL))
-
-#define PRECHARGE_BANK(bank) (*(volatile uint32_t *) \
- (SDRAM_BASE_ADDR | SDRAM_BANK_SEL_##bank)) = 0
-
-static void precharge_all_banks(void);
-static void setup_refresh_timer(void);
-static void program_mode_registers(void);
-
-void sdram_cfg(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- writel(SDRAM_DEVCFG_VAL, &sdram->SDRAM_DEVCFG_REG);
-
- /* Issue continous NOP commands */
- writel(GLCONFIG_INIT | GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig);
-
- early_udelay(200);
-
- precharge_all_banks();
-
- setup_refresh_timer();
-
- program_mode_registers();
-
- /* Select normal operation mode */
- writel(GLCONFIG_CKE, &sdram->glconfig);
-}
-
-static void precharge_all_banks(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- /* Issue PRECHARGE ALL commands */
- writel(GLCONFIG_INIT | GLCONFIG_CKE, &sdram->glconfig);
-
- /*
- * Errata of most EP93xx revisions say that PRECHARGE ALL isn't always
- * issued
- *
- * Cirrus proposes a workaround which consists in performing a read from
- * each bank to force the precharge. This causes some boards to hang.
- * Writing to the SDRAM banks instead of reading has the same
- * side-effect (the SDRAM controller issues the necessary precharges),
- * but is known to work on all supported boards
- */
-
- PRECHARGE_BANK(0);
-
-#if (CONFIG_NR_DRAM_BANKS >= 2)
- PRECHARGE_BANK(1);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS >= 3)
- PRECHARGE_BANK(2);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS == 4)
- PRECHARGE_BANK(3);
-#endif
-}
-
-static void setup_refresh_timer(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- /* Load refresh timer with 10 to issue refresh every 10 cycles */
- writel(0x0a, &sdram->refrshtimr);
-
- /*
- * Wait at least 80 clock cycles to provide 8 refresh cycles
- * to all SDRAMs
- */
- early_udelay(1);
-
- /*
- * Program refresh timer with normal value
- * We need 8192 refresh cycles every 64ms
- * at 15ns (HCLK >= 66MHz) per cycle:
- * 64ms / 8192 = 7.8125us
- * 7.8125us / 15ns = 520 (0x208)
- */
- /*
- * TODO: redboot uses 0x1e0 for the slowest possible device
- * but i don't understand how this value is calculated
- */
- writel(0x208, &sdram->refrshtimr);
-}
-
-static void program_mode_registers(void)
-{
- struct sdram_regs *sdram = (struct sdram_regs *)SDRAM_BASE;
-
- /* Select mode register update mode */
- writel(GLCONFIG_MRS | GLCONFIG_CKE, &sdram->glconfig);
-
- /*
- * The mode registers are programmed by performing a read from each
- * SDRAM bank. The value of the address that is read defines the value
- * that is written into the mode register
- */
-
- PROGRAM_MODE_REG(0);
-
-#if (CONFIG_NR_DRAM_BANKS >= 2)
- PROGRAM_MODE_REG(1);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS >= 3)
- PROGRAM_MODE_REG(2);
-#endif
-
-#if (CONFIG_NR_DRAM_BANKS == 4)
- PROGRAM_MODE_REG(3);
-#endif
-}
diff --git a/board/edb93xx/sdram_cfg.h b/board/edb93xx/sdram_cfg.h
deleted file mode 100644
index 757b63c..0000000
--- a/board/edb93xx/sdram_cfg.h
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) 2009 Matthias Kaehlcke <matthias@kaehlcke.net>
- *
- * Copyright (C) 2006 Dominic Rath <Dominic.Rath@gmx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/ep93xx.h>
-
-#define SDRAM_BASE_ADDR PHYS_SDRAM_1
-
-#ifdef CONFIG_EDB93XX_SDCS0
-#define SDRAM_DEVCFG_REG devcfg0
-#elif defined(CONFIG_EDB93XX_SDCS3)
-#define SDRAM_DEVCFG_REG devcfg3
-#else
-#error "SDRAM bank configuration"
-#endif
-
-#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302) || \
- defined(CONFIG_EDB9302A)
-/*
- * 1x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
- *
- * CLK cycle time min:
- * @ CAS latency = 3: 7.5ns
- * @ CAS latency = 2: 10ns
- * We're running at 66MHz (15ns cycle time) external bus speed (HCLK),
- * so it's safe to use CAS latency = 2
- *
- * RAS-to-CAS delay min:
- * 20ns
- * At 15ns cycle time, we use RAS-to-CAS delay = 2
- *
- * SROMLL = 1: Swap BA[1:0] with A[13:12], making the SDRAM appear
- * as four blocks of 8MB size, instead of eight blocks of 4MB size:
- *
- * EDB9301/EDB9302:
- *
- * 0x00000000 - 0x007fffff
- * 0x01000000 - 0x017fffff
- * 0x04000000 - 0x047fffff
- * 0x05000000 - 0x057fffff
- *
- *
- * EDB9302a:
- *
- * 0xc0000000 - 0xc07fffff
- * 0xc1000000 - 0xc17fffff
- * 0xc4000000 - 0xc47fffff
- * 0xc5000000 - 0xc57fffff
- *
- * BANKCOUNT = 1: This is a device with four banks
- */
-
-#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \
- SDRAM_DEVCFG_SROMLL | \
- SDRAM_DEVCFG_CASLAT_2 | \
- SDRAM_DEVCFG_RASTOCAS_2 | \
- SDRAM_DEVCFG_EXTBUSWIDTH)
-
-/*
- * 16 bit ext. bus
- *
- * A[22:09] is output as SYA[13:0]
- * CAS latency: 2
- * Burst type: sequential
- * Burst length: 8 (required for 16 bit ext. bus)
- * SYA[13:0] = 0x0023
- */
-#define SDRAM_MODE_REG_VAL 0x4600
-
-#define SDRAM_BANK_SEL_0 0x00000000 /* A[22:21] = b00 */
-#define SDRAM_BANK_SEL_1 0x00200000 /* A[22:21] = b01 */
-#define SDRAM_BANK_SEL_2 0x00400000 /* A[22:21] = b10 */
-#define SDRAM_BANK_SEL_3 0x00600000 /* A[22:21] = b11 */
-
-#elif defined(CONFIG_EDB9307) || defined(CONFIG_EDB9307A) || \
- defined CONFIG_EDB9312 || defined(CONFIG_EDB9315) || \
- defined(CONFIG_EDB9315A)
-/*
- * 2x Samsung K4S561632C-TC/L75 4M x 16bit x 4 banks SDRAM
- *
- * CLK cycle time min:
- * @ CAS latency = 3: 7.5ns
- * @ CAS latency = 2: 10ns
- * We're running at 100MHz (10ns cycle time) external bus speed (HCLK),
- * so it's safe to use CAS latency = 2
- *
- * RAS-to-CAS delay min:
- * 20ns
- * At 10ns cycle time, we use RAS-to-CAS delay = 2
- *
- * EDB9307, EDB9312, EDB9315:
- *
- * 0x00000000 - 0x01ffffff
- * 0x04000000 - 0x05ffffff
- *
- *
- * EDB9307a, EDB9315a:
- *
- * 0xc0000000 - 0xc1ffffff
- * 0xc4000000 - 0xc5ffffff
- */
-
-#define SDRAM_DEVCFG_VAL (SDRAM_DEVCFG_BANKCOUNT | \
- SDRAM_DEVCFG_SROMLL | \
- SDRAM_DEVCFG_CASLAT_2 | \
- SDRAM_DEVCFG_RASTOCAS_2)
-
-/*
- * 32 bit ext. bus
- *
- * A[23:10] is output as SYA[13:0]
- * CAS latency: 2
- * Burst type: sequential
- * Burst length: 4
- * SYA[13:0] = 0x0022
- */
-#define SDRAM_MODE_REG_VAL 0x8800
-
-#define SDRAM_BANK_SEL_0 0x00000000 /* A[23:22] = b00 */
-#define SDRAM_BANK_SEL_1 0x00400000 /* A[23:22] = b01 */
-#define SDRAM_BANK_SEL_2 0x00800000 /* A[23:22] = b10 */
-#define SDRAM_BANK_SEL_3 0x00c00000 /* A[23:22] = b11 */
-#endif
diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c
index 4b36918..5be1f6c 100644
--- a/board/efikamx/efikamx.c
+++ b/board/efikamx/efikamx.c
@@ -27,7 +27,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/iomux.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
@@ -76,28 +76,23 @@ u32 get_efika_rev(void)
* rev1.4: 1,0,0
*/
mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0),
- MXC_GPIO_DIRECTION_OUT);
/* set to 1 in order to get correct value on board rev1.1 */
- mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1);
mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS0, PAD_CTL_100K_PU);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0),
- MXC_GPIO_DIRECTION_IN);
- rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0;
+ gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0));
+ rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0;
mxc_request_iomux(MX51_PIN_NANDF_CS1, IOMUX_CONFIG_GPIO);
mxc_iomux_set_pad(MX51_PIN_NANDF_CS1, PAD_CTL_100K_PU);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1),
- MXC_GPIO_DIRECTION_IN);
- rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1;
+ gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1));
+ rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1;
mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_GPIO);
mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, PAD_CTL_100K_PU);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3),
- MXC_GPIO_DIRECTION_IN);
- rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2;
+ gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3));
+ rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2;
return (~rev & 0x7) + 1;
}
@@ -154,15 +149,11 @@ static void setup_iomux_spi(void)
/* Configure SS0 as a GPIO */
mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_GPIO);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0),
- MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0);
/* Configure SS1 as a GPIO */
mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_GPIO);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1),
- MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1);
/* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */
mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
@@ -282,9 +273,9 @@ int board_mmc_getcd(u8 *absent, struct mmc *mmc)
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- *absent = mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0));
+ *absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0));
else
- *absent = mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
+ *absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
return 0;
}
@@ -307,10 +298,8 @@ int board_mmc_init(bd_t *bis)
PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_SRE_FAST);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0),
- MXC_GPIO_DIRECTION_IN);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1),
- MXC_GPIO_DIRECTION_IN);
+ gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0));
+ gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1));
/* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */
if (get_efika_rev() < EFIKAMX_BOARD_REV_12) {
@@ -389,10 +378,8 @@ int board_mmc_init(bd_t *bis)
PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE |
PAD_CTL_SRE_FAST);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8),
- MXC_GPIO_DIRECTION_IN);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7),
- MXC_GPIO_DIRECTION_IN);
+ gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8));
+ gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7));
ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
if (!ret)
@@ -508,25 +495,24 @@ void setup_iomux_led(void)
{
/* Blue LED */
mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9),
- MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0);
+
/* Green LED */
mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC),
- MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0);
+
/* Red LED */
mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3);
- mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC),
- MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0);
}
void efikamx_toggle_led(uint32_t mask)
{
- mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9),
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9),
mask & EFIKAMX_LED_BLUE);
- mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC),
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC),
mask & EFIKAMX_LED_GREEN);
- mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC),
+ gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC),
mask & EFIKAMX_LED_RED);
}
diff --git a/board/esd/meesc/config.mk b/board/esd/meesc/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/esd/meesc/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/esd/meesc/meesc.c b/board/esd/meesc/meesc.c
index 41fa3e1..ad43531 100644
--- a/board/esd/meesc/meesc.c
+++ b/board/esd/meesc/meesc.c
@@ -3,7 +3,7 @@
* Stelian Pop <stelian.pop@leadtechdesign.com>
* Lead Tech Design <www.leadtechdesign.com>
*
- * (C) Copyright 2009-2010
+ * (C) Copyright 2009-2011
* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
* esd electronic system design gmbh <www.esd.eu>
*
@@ -27,7 +27,7 @@
*/
#include <common.h>
-#include <asm/arch/at91sam9263.h>
+#include <asm/io.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
@@ -35,8 +35,6 @@
#include <asm/arch/at91_matrix.h>
#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/io.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -67,8 +65,8 @@ int get_hw_rev(void)
static void meesc_nand_hw_init(void)
{
unsigned long csa;
- at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE;
- at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
+ at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC0;
+ at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
/* Enable CS3 */
csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
@@ -88,7 +86,7 @@ static void meesc_nand_hw_init(void)
writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
AT91_SMC_MODE_EXNW_DISABLE |
AT91_SMC_MODE_DBW_8 |
- AT91_SMC_MODE_TDF_CYCLE(2),
+ AT91_SMC_MODE_TDF_CYCLE(3),
&smc->cs[3].mode);
/* Configure RDY/BSY */
@@ -102,9 +100,9 @@ static void meesc_nand_hw_init(void)
#ifdef CONFIG_MACB
static void meesc_macb_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
/* Enable clock */
- writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer);
+ writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
at91_macb_hw_init();
}
#endif
@@ -117,7 +115,7 @@ static void meesc_macb_hw_init(void)
*/
static void meesc_ethercat_hw_init(void)
{
- at91_smc_t *smc1 = (at91_smc_t *) AT91_SMC1_BASE;
+ at91_smc_t *smc1 = (at91_smc_t *) ATMEL_BASE_SMC1;
/* Configure SMC EBI1_CS0 for EtherCAT */
writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
@@ -142,8 +140,9 @@ static void meesc_ethercat_hw_init(void)
int dram_init(void)
{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = get_ram_size((long *) PHYS_SDRAM, (1 << 27));
+ gd->ram_size = get_ram_size(
+ (void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
return 0;
}
@@ -151,7 +150,7 @@ int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x00);
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x00);
#endif
return rc;
}
@@ -225,7 +224,7 @@ int misc_init_r(void)
{
char *str;
char buf[32];
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
/*
* Normally the processor clock has a divisor of 2.
@@ -246,24 +245,28 @@ int misc_init_r(void)
}
#endif /* CONFIG_MISC_INIT_R */
-int board_init(void)
+int board_early_init_f(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
- /* Peripheral Clock Enable Register */
- writel(1 << AT91SAM9263_ID_PIOA |
- 1 << AT91SAM9263_ID_PIOB |
- 1 << AT91SAM9263_ID_PIOCDE |
- 1 << AT91SAM9263_ID_UHP,
+ /* enable all clocks */
+ writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) |
+ (1 << ATMEL_ID_PIOCDE) | (1 << ATMEL_ID_UHP),
&pmc->pcer);
+ at91_seriald_hw_init();
+
+ return 0;
+}
+
+int board_init(void)
+{
/* initialize ET1100 Controller */
meesc_ethercat_hw_init();
/* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
- at91_serial_hw_init();
#ifdef CONFIG_CMD_NAND
meesc_nand_hw_init();
#endif
diff --git a/board/freescale/mx35pdk/lowlevel_init.S b/board/freescale/mx35pdk/lowlevel_init.S
index 9b0f1b5..9fd04cb 100644
--- a/board/freescale/mx35pdk/lowlevel_init.S
+++ b/board/freescale/mx35pdk/lowlevel_init.S
@@ -193,10 +193,11 @@
mov r2, #0x00
mov r1, #CSD0_BASE_ADDR
bl setup_sdram_bank
- cmp r3, #0x0
- orreq r5, r5, #1
- eorne r2, r2, #0x1
- blne setup_sdram_bank
+
+ mov r5, #0x00
+ mov r2, #0x00
+ mov r1, #CSD1_BASE_ADDR
+ bl setup_sdram_bank
mov lr, fp
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index da926e5..9eefe5e 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -34,7 +34,7 @@
#include <mc9sdz60.h>
#include <mc13892.h>
#include <linux/types.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
#include <netdev.h>
@@ -52,12 +52,25 @@ DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
- gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1,
- PHYS_SDRAM_1_SIZE);
+ u32 size1, size2;
+
+ size1 = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+ size2 = get_ram_size((void *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
+
+ gd->ram_size = size1 + size2;
return 0;
}
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
+
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
+}
+
static void setup_iomux_i2c(void)
{
int pad;
@@ -227,8 +240,7 @@ int board_late_init(void)
mxc_request_iomux(MX35_PIN_COMPARE, MUX_CONFIG_GPIO);
mxc_iomux_set_input(MUX_IN_GPIO1_IN_5, INPUT_CTL_PATH0);
- mxc_gpio_direction(37, MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_set(37, 1);
+ gpio_direction_output(37, 1);
}
val = mc9sdz60_reg_read(MC9SDZ60_REG_GPIO_1) | 0x04;
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index fd7342f..94ea1f2 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -22,6 +22,7 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/iomux.h>
@@ -180,7 +181,6 @@ static void setup_iomux_spi(void)
static void power_init(void)
{
unsigned int val;
- unsigned int reg;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
/* Write needed to Power Gate 2 register */
@@ -249,13 +249,7 @@ static void power_init(void)
pmic_reg_write(REG_MODE_1, val);
udelay(200);
- reg = readl(GPIO2_BASE_ADDR + 0x0);
- reg &= ~0x4000; /* Lower reset line */
- writel(reg, GPIO2_BASE_ADDR + 0x0);
-
- reg = readl(GPIO2_BASE_ADDR + 0x4);
- reg |= 0x4000; /* configure GPIO lines as output */
- writel(reg, GPIO2_BASE_ADDR + 0x4);
+ gpio_direction_output(46, 0);
/* Reset the ethernet controller over GPIO */
writel(0x1, IOMUXC_BASE_ADDR + 0x0AC);
@@ -267,9 +261,7 @@ static void power_init(void)
udelay(500);
- reg = readl(GPIO2_BASE_ADDR + 0x0);
- reg |= 0x4000;
- writel(reg, GPIO2_BASE_ADDR + 0x0);
+ gpio_set_value(46, 1);
}
#ifdef CONFIG_FSL_ESDHC
@@ -278,9 +270,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- *cd = readl(GPIO1_BASE_ADDR) & 0x01;
+ *cd = gpio_get_value(0);
else
- *cd = readl(GPIO1_BASE_ADDR) & 0x40;
+ *cd = gpio_get_value(6);
return 0;
}
diff --git a/board/freescale/mx53ard/imximage_dd3.cfg b/board/freescale/mx53ard/imximage_dd3.cfg
index 0f298ab..50e05af 100644
--- a/board/freescale/mx53ard/imximage_dd3.cfg
+++ b/board/freescale/mx53ard/imximage_dd3.cfg
@@ -83,14 +83,14 @@ DATA 4 0x63fd9004 0x0002002d
DATA 4 0x63fd901c 0x00008032
DATA 4 0x63fd901c 0x00008033
DATA 4 0x63fd901c 0x00028031
-DATA 4 0x63fd901c 0x092080b0
+DATA 4 0x63fd901c 0x052080b0
DATA 4 0x63fd901c 0x04008040
DATA 4 0x63fd901c 0x0000803a
DATA 4 0x63fd901c 0x0000803b
DATA 4 0x63fd901c 0x00028039
-DATA 4 0x63fd901c 0x09208138
+DATA 4 0x63fd901c 0x05208138
DATA 4 0x63fd901c 0x04008048
-DATA 4 0x63fd9020 0x00001800
+DATA 4 0x63fd9020 0x00005800
DATA 4 0x63fd9040 0x04b80003
DATA 4 0x63fd9058 0x00022227
DATA 4 0x63fd901C 0x00000000
diff --git a/board/freescale/mx53ard/mx53ard.c b/board/freescale/mx53ard/mx53ard.c
index 134603a..6e3360b 100644
--- a/board/freescale/mx53ard/mx53ard.c
+++ b/board/freescale/mx53ard/mx53ard.c
@@ -31,7 +31,7 @@
#include <netdev.h>
#include <mmc.h>
#include <fsl_esdhc.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
#define ETHERNET_INT (1 * 32 + 31) /* GPIO2_31 */
@@ -93,9 +93,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- *cd = mxc_gpio_get(1); /*GPIO1_1*/
+ *cd = gpio_get_value(1); /*GPIO1_1*/
else
- *cd = mxc_gpio_get(4); /*GPIO1_4*/
+ *cd = gpio_get_value(4); /*GPIO1_4*/
return 0;
}
@@ -176,7 +176,7 @@ static void weim_smc911x_iomux(void)
{
/* ETHERNET_INT as GPIO2_31 */
mxc_request_iomux(MX53_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
- mxc_gpio_direction(ETHERNET_INT, MXC_GPIO_DIRECTION_IN);
+ gpio_direction_input(ETHERNET_INT);
/* Data bus */
mxc_request_iomux(MX53_PIN_EIM_D16, IOMUX_CONFIG_ALT0);
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
index 88095dc..81857ff 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -33,7 +33,7 @@
#include <mmc.h>
#include <fsl_esdhc.h>
#include <fsl_pmic.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
#include <mc13892.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -213,9 +213,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- *cd = mxc_gpio_get(77); /*GPIO3_13*/
+ *cd = gpio_get_value(77); /*GPIO3_13*/
else
- *cd = mxc_gpio_get(75); /*GPIO3_11*/
+ *cd = gpio_get_value(75); /*GPIO3_11*/
return 0;
}
diff --git a/board/freescale/mx53loco/imximage.cfg b/board/freescale/mx53loco/imximage.cfg
index ce9c8fc..f30258e 100644
--- a/board/freescale/mx53loco/imximage.cfg
+++ b/board/freescale/mx53loco/imximage.cfg
@@ -83,14 +83,14 @@ DATA 4 0x63fd9004 0x0002002d
DATA 4 0x63fd901c 0x00008032
DATA 4 0x63fd901c 0x00008033
DATA 4 0x63fd901c 0x00028031
-DATA 4 0x63fd901c 0x092080b0
+DATA 4 0x63fd901c 0x052080b0
DATA 4 0x63fd901c 0x04008040
DATA 4 0x63fd901c 0x0000803a
DATA 4 0x63fd901c 0x0000803b
DATA 4 0x63fd901c 0x00028039
-DATA 4 0x63fd901c 0x09208138
+DATA 4 0x63fd901c 0x05208138
DATA 4 0x63fd901c 0x04008048
-DATA 4 0x63fd9020 0x00001800
+DATA 4 0x63fd9020 0x00005800
DATA 4 0x63fd9040 0x04b80003
DATA 4 0x63fd9058 0x00022227
DATA 4 0x63fd901c 0x00000000
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index 18b388e..ade1006 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -34,7 +34,7 @@
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -146,9 +146,9 @@ int board_mmc_getcd(u8 *cd, struct mmc *mmc)
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- *cd = mxc_gpio_get(77); /*GPIO3_13*/
+ *cd = gpio_get_value(77); /*GPIO3_13*/
else
- *cd = mxc_gpio_get(75); /*GPIO3_11*/
+ *cd = gpio_get_value(75); /*GPIO3_11*/
return 0;
}
diff --git a/board/freescale/mx53smd/imximage.cfg b/board/freescale/mx53smd/imximage.cfg
index 0f298ab..50e05af 100644
--- a/board/freescale/mx53smd/imximage.cfg
+++ b/board/freescale/mx53smd/imximage.cfg
@@ -83,14 +83,14 @@ DATA 4 0x63fd9004 0x0002002d
DATA 4 0x63fd901c 0x00008032
DATA 4 0x63fd901c 0x00008033
DATA 4 0x63fd901c 0x00028031
-DATA 4 0x63fd901c 0x092080b0
+DATA 4 0x63fd901c 0x052080b0
DATA 4 0x63fd901c 0x04008040
DATA 4 0x63fd901c 0x0000803a
DATA 4 0x63fd901c 0x0000803b
DATA 4 0x63fd901c 0x00028039
-DATA 4 0x63fd901c 0x09208138
+DATA 4 0x63fd901c 0x05208138
DATA 4 0x63fd901c 0x04008048
-DATA 4 0x63fd9020 0x00001800
+DATA 4 0x63fd9020 0x00005800
DATA 4 0x63fd9040 0x04b80003
DATA 4 0x63fd9058 0x00022227
DATA 4 0x63fd901C 0x00000000
diff --git a/board/freescale/mx53smd/mx53smd.c b/board/freescale/mx53smd/mx53smd.c
index 21b5d14..4a7ee55 100644
--- a/board/freescale/mx53smd/mx53smd.c
+++ b/board/freescale/mx53smd/mx53smd.c
@@ -31,7 +31,7 @@
#include <netdev.h>
#include <mmc.h>
#include <fsl_esdhc.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -139,7 +139,7 @@ struct fsl_esdhc_cfg esdhc_cfg[1] = {
int board_mmc_getcd(u8 *cd, struct mmc *mmc)
{
- *cd = mxc_gpio_get(77); /*GPIO3_13*/
+ *cd = gpio_get_value(77); /*GPIO3_13*/
return 0;
}
diff --git a/board/kb9202/Makefile b/board/kb9202/Makefile
deleted file mode 100644
index 49be161..0000000
--- a/board/kb9202/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# Adapted for KwikByte KB920x boards - APR2005
-#
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := kb9202.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/kb9202/config.mk b/board/kb9202/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/kb9202/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c
deleted file mode 100644
index 3164cc5..0000000
--- a/board/kb9202/kb9202.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adapted for KwikByte KB920x board from at91rm9200dk.c: 22APR2005
- */
-
-#include <common.h>
-#include <asm/arch/AT91RM9200.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <lxt971a.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-void lowlevel_init(void) {
- /* Required by assembly functions - do nothing */
-}
-
-int board_init (void)
-{
- /* Enable Ctrlc */
- console_init_f ();
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
-
- gd->bd->bi_arch_number = MACH_TYPE_KB9200;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-
-unsigned int lxt972_IsPhyConnected (AT91PS_EMAC p_mac);
-UCHAR lxt972_GetLinkSpeed (AT91PS_EMAC p_mac);
-UCHAR lxt972_InitPhy (AT91PS_EMAC p_mac);
-UCHAR lxt972_AutoNegotiate (AT91PS_EMAC p_mac, int *status);
-
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = lxt972_InitPhy;
- p_phyops->IsPhyConnected = lxt972_IsPhyConnected;
- p_phyops->GetLinkSpeed = lxt972_GetLinkSpeed;
- p_phyops->AutoNegotiate = lxt972_AutoNegotiate;
-}
-
-#endif
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index bbb6e83..c0a006a 100644
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -28,6 +28,7 @@
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/mach-types.h>
#include <i2c.h>
#include "am3517evm.h"
@@ -74,3 +75,11 @@ void set_muxconf_regs(void)
{
MUX_AM3517EVM();
}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index 7ef13cc..dec0b26 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -34,6 +34,7 @@
#include <netdev.h>
#include <twl4030.h>
#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-types.h>
@@ -88,6 +89,14 @@ void set_muxconf_regs(void)
MUX_ZOOM1_MDK();
}
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
+
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c
index 76793e4..800113a 100644
--- a/board/logicpd/zoom2/zoom2.c
+++ b/board/logicpd/zoom2/zoom2.c
@@ -35,6 +35,7 @@
#endif
#include <twl4030.h>
#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
@@ -180,6 +181,14 @@ void set_muxconf_regs (void)
MUX_ZOOM2 ();
}
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
+
#ifdef CONFIG_CMD_NET
int board_eth_init(bd_t *bis)
{
diff --git a/board/lpd7a40x/Makefile b/board/lpd7a40x/Makefile
deleted file mode 100644
index 3aeb2fb..0000000
--- a/board/lpd7a40x/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := lpd7a40x.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/lpd7a40x/config.mk b/board/lpd7a40x/config.mk
deleted file mode 100644
index 003e707..0000000
--- a/board/lpd7a40x/config.mk
+++ /dev/null
@@ -1,38 +0,0 @@
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-# Logic ZOOM LH7A400 SDK board w/Logic LH7A400-10 card engine
-# w/Sharp LH7A400 SoC (ARM920T) cpu
-#
-
-#
-# 32 or 64 MB SDRAM on SDCSC0 @ 0xc0000000
-#
-# Linux-Kernel is @ 0xC0008000, entry 0xc0008000
-# params @ 0xc0000100
-# optionally with a ramdisk at 0xc0300000
-#
-# we load ourself to 0xc1fc0000 (32M - 256K)
-#
-# download area is 0xc0f00000
-#
-
-CONFIG_SYS_TEXT_BASE = 0xc1fc0000
-#CONFIG_SYS_TEXT_BASE = 0x00000000
diff --git a/board/lpd7a40x/flash.c b/board/lpd7a40x/flash.c
deleted file mode 100644
index f5c0713..0000000
--- a/board/lpd7a40x/flash.c
+++ /dev/null
@@ -1,490 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <environment.h>
-
-#define FLASH_BANK_SIZE 0x1000000 /* 16MB (2 x 8 MB) */
-#define MAIN_SECT_SIZE 0x40000 /* 256KB (2 x 128kB) */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-#define CMD_READ_ARRAY 0x00FF00FF
-#define CMD_IDENTIFY 0x00900090
-#define CMD_ERASE_SETUP 0x00200020
-#define CMD_ERASE_CONFIRM 0x00D000D0
-#define CMD_PROGRAM 0x00400040
-#define CMD_RESUME 0x00D000D0
-#define CMD_SUSPEND 0x00B000B0
-#define CMD_STATUS_READ 0x00700070
-#define CMD_STATUS_RESET 0x00500050
-
-#define BIT_BUSY 0x00800080
-#define BIT_ERASE_SUSPEND 0x00400040
-#define BIT_ERASE_ERROR 0x00200020
-#define BIT_PROGRAM_ERROR 0x00100010
-#define BIT_VPP_RANGE_ERROR 0x00080008
-#define BIT_PROGRAM_SUSPEND 0x00040004
-#define BIT_PROTECT_ERROR 0x00020002
-#define BIT_UNDEFINED 0x00010001
-
-#define BIT_SEQUENCE_ERROR 0x00300030
-#define BIT_TIMEOUT 0x80000000
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F640J3A & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = CONFIG_SYS_FLASH_BASE;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase;
-
- /* uniform sector size */
- flashbase += MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /*
- * Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
- printf ("2x 28F640J3A (64Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- return;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_error (ulong code)
-{
- /* Check bit patterns */
- /* SR.7=0 is busy, SR.7=1 is ready */
- /* all other flags indicate error on 1 */
- /* SR.0 is undefined */
- /* Timeout is our faked flag */
-
- /* sequence is described in Intel 290644-005 document */
-
- /* check Timeout */
- if (code & BIT_TIMEOUT) {
- puts ("Timeout\n");
- return ERR_TIMOUT;
- }
-
- /* check Busy, SR.7 */
- if (~code & BIT_BUSY) {
- puts ("Busy\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Vpp low, SR.3 */
- if (code & BIT_VPP_RANGE_ERROR) {
- puts ("Vpp range error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Device Protect Error, SR.1 */
- if (code & BIT_PROTECT_ERROR) {
- puts ("Device protect error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Command Seq Error, SR.4 & SR.5 */
- if (code & BIT_SEQUENCE_ERROR) {
- puts ("Command seqence error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Error, SR.5 */
- if (code & BIT_ERASE_ERROR) {
- puts ("Block erase error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Error, SR.4 */
- if (code & BIT_PROGRAM_ERROR) {
- puts ("Program error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Suspended, SR.6 */
- if (code & BIT_ERASE_SUSPEND) {
- puts ("Block erase suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Suspended, SR.2 */
- if (code & BIT_PROGRAM_SUSPEND) {
- puts ("Program suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* OK, no error */
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ulong result, result1;
- int iflag, prot, sect;
- int rc = ERR_OK;
- ulong start;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last);
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
- debug ("Erasing sector %2d @ %08lX... ",
- sect, info->start[sect]);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *) (info->start[sect]);
- ulong bsR7, bsR7_2, bsR5, bsR5_2;
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_ERASE_SETUP;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_STATUS_RESET;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- bsR7 = result & (1 << 7);
- bsR7_2 = result & (1 << 23);
- } while (!bsR7 | !bsR7_2);
-
- *addr = CMD_STATUS_READ;
- result1 = *addr;
- bsR5 = result1 & (1 << 5);
- bsR5_2 = result1 & (1 << 21);
-#ifdef SAMSUNG_FLASH_DEBUG
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
- if (bsR5 != 0 && bsR5_2 != 0)
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
-#endif
-
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
-
- if ((rc = flash_error (result)) != ERR_OK)
- goto outahere;
-#if 0
- printf ("ok.\n");
- } else { /* it was protected */
-
- printf ("protected!\n");
-#endif
- }
- }
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *) dest;
- ulong result;
- int rc = ERR_OK;
- int iflag;
- ulong start;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_SUSPEND;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- } while (~result & BIT_BUSY);
-
- /* *addr = CMD_READ_ARRAY; */
- *addr = CMD_STATUS_READ;
- result = *addr;
-
- rc = flash_error (result);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int l;
- int i, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = *((vu_long *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 4;
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/lpd7a40x/lowlevel_init.S b/board/lpd7a40x/lowlevel_init.S
deleted file mode 100644
index de34fc6..0000000
--- a/board/lpd7a40x/lowlevel_init.S
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Memory Setup - initialize memory controller(s) for devices required
- * to boot and relocate
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* memory controller */
-#define BCRX_DEFAULT (0x0000fbe0)
-#define BCRX_MW_8 (0x00000000)
-#define BCRX_MW_16 (0x10000000)
-#define BCRX_MW_32 (0x20000000)
-#define BCRX_PME (0x08000000)
-#define BCRX_WP (0x04000000)
-#define BCRX_WST2_SHIFT (11)
-#define BCRX_WST1_SHIFT (5)
-#define BCRX_IDCY_SHIFT (0)
-
-/* Bank0 Async Flash */
-#define BCR0 (0x80002000)
-#define BCR0_FLASH (BCRX_MW_32 | (0x08<<BCRX_WST2_SHIFT) | (0x0E<<BCRX_WST1_SHIFT))
-
-/* Bank1 Open */
-#define BCR1 (0x80002004)
-
-/* Bank2 Not used (EEPROM?) */
-#define BCR2 (0x80002008)
-
-/* Bank3 Not used */
-#define BCR3 (0x8000200C)
-
-/* Bank4 PC Card1 */
-
-/* Bank5 PC Card2 */
-
-/* Bank6 CPLD IO Controller Peripherals (slow) */
-#define BCR6 (0x80002018)
-#define BCR6_CPLD_SLOW (BCRX_DEFAULT | BCRX_MW_16)
-
-/* Bank7 CPLD IO Controller Peripherals (fast) */
-#define BCR7 (0x8000201C)
-#define BCR7_CPLD_FAST (BCRX_MW_16 | (0x16<<BCRX_WST2_SHIFT) | (0x16<<BCRX_WST1_SHIFT) | (0x2<<BCRX_IDCY_SHIFT))
-
-/* SDRAM */
-#define GBLCNFG (0x80002404)
-#define GC_CKE (0x80000000)
-#define GC_CKSD (0x40000000)
-#define GC_LCR (0x00000040)
-#define GC_SMEMBURST (0x00000020)
-#define GC_MRS (0x00000002)
-#define GC_INIT (0x00000001)
-
-#define GC_CMD_NORMAL (GC_CKE)
-#define GC_CMD_MODE (GC_CKE | GC_MRS)
-#define GC_CMD_SYNCFLASH_LOAD (GC_CKE | GC_MRS | GC_LCR)
-#define GC_CMD_PRECHARGEALL (GC_CKE | GC_INIT)
-#define GC_CMD_NOP (GC_CKE | GC_INIT | GC_MRS)
-
-#define RFSHTMR (0x80002408)
-#define RFSHTMR_INIT (10) /* period=100 ns, HCLK=100Mhz, (2048+1-15.6*66) */
-#define RFSHTMR_NORMAL (1500) /* period=15.6 us, HCLK=100Mhz, (2048+1-15.6*66) */
-
-#define SDCSCX_BASE (0x80002410)
-#define SDCSCX_DEFAULT (0x01220008)
-#define SDCSCX_AUTOPC (0x01000000)
-#define SDCSCX_RAS2CAS_2 (0x00200000)
-#define SDCSCX_RAS2CAS_3 (0x00300000)
-#define SDCSCX_WBL (0x00080000)
-#define SDCSCX_CASLAT_8 (0x00070000)
-#define SDCSCX_CASLAT_7 (0x00060000)
-#define SDCSCX_CASLAT_6 (0x00050000)
-#define SDCSCX_CASLAT_5 (0x00040000)
-#define SDCSCX_CASLAT_4 (0x00030000)
-#define SDCSCX_CASLAT_3 (0x00020000)
-#define SDCSCX_CASLAT_2 (0x00010000)
-#define SDCSCX_2KPAGE (0x00000040)
-#define SDCSCX_SROMLL (0x00000020)
-#define SDCSCX_SROM512 (0x00000010)
-#define SDCSCX_4BNK (0x00000008)
-#define SDCSCX_2BNK (0x00000000)
-#define SDCSCX_EBW_16 (0x00000004)
-#define SDCSCX_EBW_32 (0x00000000)
-
-#define SDRAM_BASE (0xC0000000)
-#define SDCSC_BANK_OFFSET (0x10000000)
-
-/*
- * The SDRAM DEVICE MODE PROGRAMMING VALUE
- */
-#define BURST_LENGTH_4 (2 << 10)
-#define BURST_LENGTH_8 (3 << 10)
-#define WBURST_LENGTH_BL (0 << 19)
-#define WBURST_LENGTH_SINGLE (1 << 19)
-#define CAS_2 (2 << 14)
-#define CAS_3 (3 << 14)
-#define BAT_SEQUENTIAL (0 << 13)
-#define BAT_INTERLEAVED (1 << 13)
-#define OPM_NORMAL (0 << 17)
-#define SDRAM_DEVICE_MODE (WBURST_LENGTH_BL|OPM_NORMAL|CAS_3|BAT_SEQUENTIAL|BURST_LENGTH_4)
-
-
-#define TIMER1_BASE (0x80000C00)
-
-/*
- * special lookup flags
- */
-#define DO_MEM_DELAY 1
-#define DO_MEM_READ 2
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
- mov r9, lr @ save return address
-
- /* memory control configuration */
- /* make r0 relative the current location so that it */
- /* reads INITMEM_DATA out of FLASH rather than memory ! */
- /* r0 = current word pointer */
- /* r1 = end word location, one word past last actual word */
- /* r3 = address for writes, special lookup flags */
- /* r4 = value for writes, delay constants, or read addresses */
- /* r2 = location for mem reads */
-
- ldr r0, =INITMEM_DATA
- ldr r1, _TEXT_BASE
- sub r0, r0, r1
- add r1, r0, #112
-
-mem_loop:
- cmp r1, r0
- moveq pc, r9 @ Done
-
- ldr r3, [r0], #4 @ Fetch Destination Register Address, or 1 for delay
- ldr r4, [r0], #4 @ value
-
- cmp r3, #DO_MEM_DELAY
- bleq mem_delay
- beq mem_loop
- cmp r3, #DO_MEM_READ
- ldreq r2, [r4]
- beq mem_loop
- str r4, [r3] @ normal register/ram store
- b mem_loop
-
-mem_delay:
- ldr r5, =TIMER1_BASE
- mov r6, r4, LSR #1 @ timer resolution is ~2us
- str r6, [r5]
- mov r6, #0x88 @ using 508.469KHz clock, enable
- str r6, [r5, #8]
-0: ldr r6, [r5, #4] @ timer value
- cmp r6, #0
- bne 0b
- mov r6, #0 @ disable timer
- str r6, [r5, #8]
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-INITMEM_DATA:
- .word BCR0
- .word BCR0_FLASH
- .word BCR6
- .word BCR6_CPLD_SLOW
- .word BCR7
- .word BCR7_CPLD_FAST
- .word SDCSCX_BASE
- .word (SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
- .word GBLCNFG
- .word GC_CMD_NOP
- .word DO_MEM_DELAY
- .word 200
- .word GBLCNFG
- .word GC_CMD_PRECHARGEALL
- .word RFSHTMR
- .word RFSHTMR_INIT
- .word DO_MEM_DELAY
- .word 8
- .word RFSHTMR
- .word RFSHTMR_NORMAL
- .word GBLCNFG
- .word GC_CMD_MODE
- .word DO_MEM_READ
- .word (SDRAM_BASE | SDRAM_DEVICE_MODE)
- .word GBLCNFG
- .word GC_CMD_NORMAL
- .word SDCSCX_BASE
- .word (SDCSCX_AUTOPC | SDCSCX_RAS2CAS_3 | SDCSCX_CASLAT_3 | SDCSCX_SROMLL | SDCSCX_4BNK | SDCSCX_EBW_32)
diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c
deleted file mode 100644
index 437dad0..0000000
--- a/board/lpd7a40x/lpd7a40x.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#if defined(CONFIG_LH7A400)
-#include <lh7a400.h>
-#elif defined(CONFIG_LH7A404)
-#include <lh7a404.h>
-#else
-#error "No CPU defined!"
-#endif
-#include <asm/mach-types.h>
-
-#include <lpd7a400_cpld.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* set up the I/O ports */
-
- /* enable flash programming */
- *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_FLASH_REG)) |= FLASH_FPEN;
-
- /* Auto wakeup, LCD disable, WLAN enable */
- *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_CECTL_REG)) &=
- ~(CECTL_AWKP|CECTL_LCDV|CECTL_WLPE);
-
- /* Status LED 2 on (leds are active low) */
- *(LPD7A400_CPLD_REGPTR(LPD7A400_CPLD_EXTGPIO_REG)) =
- (EXTGPIO_STATUS1|EXTGPIO_GPIO1) & ~(EXTGPIO_STATUS2);
-
-#if defined(CONFIG_LH7A400)
- /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
- gd->bd->bi_arch_number = MACH_TYPE_LPD7A400;
-#elif defined(CONFIG_LH7A404)
- /* arch number of Logic-Board - MACH_TYPE_LPD7A400 */
- gd->bd->bi_arch_number = MACH_TYPE_LPD7A404;
-#endif
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xc0000100;
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/lubbock/flash.c b/board/lubbock/flash.c
index 1ea2893..e1e7807 100644
--- a/board/lubbock/flash.c
+++ b/board/lubbock/flash.c
@@ -408,7 +408,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
/* wait while polling the status register */
while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start)) > CONFIG_SYS_FLASH_WRITE_TOUT) {
+ if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
*addr = (FPW) 0x00FF00FF; /* restore read mode */
return (1);
}
diff --git a/board/m501sk/Makefile b/board/m501sk/Makefile
deleted file mode 100644
index 439e99f..0000000
--- a/board/m501sk/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := m501sk.o eeprom.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/m501sk/config.mk b/board/m501sk/config.mk
deleted file mode 100644
index 2077692..0000000
--- a/board/m501sk/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x21f00000
diff --git a/board/m501sk/eeprom.c b/board/m501sk/eeprom.c
deleted file mode 100644
index d1a46f3..0000000
--- a/board/m501sk/eeprom.c
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Add by Alan Lu, 07-29-2005
- * For ATMEL AT24C16 EEPROM
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <i2c.h>
-#ifdef CONFIG_SYS_EEPROM_AT24C16
-#undef DEBUG
-
-void eeprom_init(void)
-{
-#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SOFT_I2C)
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-}
-
-int eeprom_read(unsigned dev_addr, unsigned offset, uchar *buffer,
- unsigned cnt)
-{
- int page, count = 0, i = 0;
- page = offset / 0x100;
- i = offset % 0x100;
-
- while (count < cnt) {
- if (i2c_read(dev_addr|page, i++, 1, buffer+count++, 1) != 0)
- return 1;
- if (i > 0xff) {
- page++;
- i = 0;
- }
- }
-
- return 0;
-}
-
-/*
- * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 2 (16-bit EEPROM address) offset is
- * 0x000nxxxx for EEPROM address selectors at n, offset xxxx in EEPROM.
- *
- * for CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 (8-bit EEPROM page address) offset is
- * 0x00000nxx for EEPROM address selectors and page number at n.
- */
-int eeprom_write(unsigned dev_addr, unsigned offset, uchar *buffer,
- unsigned cnt)
-{
- int page, i = 0, count = 0;
-
- page = offset / 0x100;
- i = offset % 0x100;
-
- while (count < cnt) {
- if (i2c_write(dev_addr|page, i++, 1, buffer+count++, 1) != 0)
- return 1;
- if (i > 0xff) {
- page++;
- i = 0;
- }
- }
-
-#if defined(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS)
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
-#endif
-
- return 0;
-}
-
-#ifndef CONFIG_SPI
-int eeprom_probe(unsigned dev_addr, unsigned offset)
-{
- unsigned char chip;
-
- /* Probe the chip address */
-#if CONFIG_SYS_I2C_EEPROM_ADDR_LEN == 1 && !defined(CONFIG_SPI_X)
- chip = offset >> 8; /* block number */
-#else
- chip = offset >> 16; /* block number */
-#endif /* CONFIG_SYS_I2C_EEPROM_ADDR_LEN, CONFIG_SPI_X */
-
- chip |= dev_addr; /* insert device address */
- return (i2c_probe(chip));
-}
-#endif
-#endif
diff --git a/board/m501sk/m501sk.c b/board/m501sk/m501sk.c
deleted file mode 100644
index c995768..0000000
--- a/board/m501sk/m501sk.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * (C) Copyright 2008
- * Based on modifications by Alan Lu / Artila
- * Author : Timo Tuunainen / Sysart
- Kimmo Leppala / Sysart
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <netdev.h>
-#if defined(CONFIG_DRIVER_ETHER)
-#include <at91rm9200_net.h>
-#include <dm9161.h>
-#endif
-
-#include "m501sk.h"
-#include "net.h"
-
-#ifdef CONFIG_M501SK
-
-void m501sk_gpio_init(void)
-{
- AT91C_BASE_PIOD->PIO_PER = 1 << (M501SK_DEBUG_LED1 - 96) |
- 1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) |
- 1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96);
-
- AT91C_BASE_PIOD->PIO_OER = 1 << (M501SK_DEBUG_LED1 - 96) |
- 1 << (M501SK_DEBUG_LED2 - 96) | 1 << (M501SK_DEBUG_LED3 - 96) |
- 1 << (M501SK_DEBUG_LED4 - 96) | 1 << (M501SK_READY_LED - 96);
-
- AT91C_BASE_PIOD->PIO_SODR = 1 << (M501SK_READY_LED - 96);
- AT91C_BASE_PIOD->PIO_CODR = 1 << (M501SK_DEBUG_LED3 - 96);
- AT91C_BASE_PIOB->PIO_PER = 1 << (M501SK_BUZZER - 32);
- AT91C_BASE_PIOB->PIO_OER = 1 << (M501SK_BUZZER - 32);
- AT91C_BASE_PIOC->PIO_PDR = (1 << 7) | (1 << 8);
-
- /* Power OFF all USART's LEDs */
- AT91C_BASE_PIOA->PIO_PER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
- AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
- AT91C_PA23_TXD2;
-
- AT91C_BASE_PIOA->PIO_OER = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
- AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
- AT91C_PA23_TXD2;
-
- AT91C_BASE_PIOA->PIO_SODR = AT91C_PA5_TXD3 | AT91C_PA6_RXD3 |
- AT91C_PA17_TXD0 | AT91C_PA18_RXD0 | AT91C_PA22_RXD2 | \
- AT91C_PA23_TXD2;
-
- AT91C_BASE_PIOB->PIO_PER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
- AT91C_BASE_PIOB->PIO_OER = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
- AT91C_BASE_PIOB->PIO_SODR = AT91C_PB20_RXD1 | AT91C_PB21_TXD1;
-}
-
-uchar m501sk_gpio_set(M501SK_PIO io)
-{
- uchar status = 0xff;
- switch (io) {
- case M501SK_DEBUG_LED1:
- case M501SK_DEBUG_LED2:
- case M501SK_DEBUG_LED3:
- case M501SK_DEBUG_LED4:
- case M501SK_READY_LED:
- AT91C_BASE_PIOD->PIO_SODR = 1 << (io - 96);
- status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96));
- break;
- case M501SK_BUZZER:
- AT91C_BASE_PIOB->PIO_SODR = 1 << (io - 32);
- status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32));
- break;
- }
- return status;
-}
-
-uchar m501sk_gpio_clear(M501SK_PIO io)
-{
- uchar status = 0xff;
- switch (io) {
- case M501SK_DEBUG_LED1:
- case M501SK_DEBUG_LED2:
- case M501SK_DEBUG_LED3:
- case M501SK_DEBUG_LED4:
- case M501SK_READY_LED:
- AT91C_BASE_PIOD->PIO_CODR = 1 << (io - 96);
- status = AT91C_BASE_PIOD->PIO_ODSR & (1 << (io - 96));
- break;
- case M501SK_BUZZER:
- AT91C_BASE_PIOB->PIO_CODR = 1 << (io - 32);
- status = AT91C_BASE_PIOB->PIO_ODSR & (1 << (io - 32));
- break;
- }
- return status;
-}
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- /* Enable Ctrlc */
- console_init_f();
-
- /* Correct IRDA resistor problem */
- /* Set PA23_TXD in Output */
- ((AT91PS_PIO)AT91C_BASE_PIOA)->PIO_OER = AT91C_PA23_TXD2;
-
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
- gd->bd->bi_arch_number = MACH_TYPE_M501;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- m501sk_gpio_init();
-
- /* Do interrupt init here, because flash needs timers */
- timer_init();
- flash_init();
-
- return 0;
-}
-
-int dram_init(void)
-{
- int i = 0;
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
-
- for (i = 0; i < 500; i++) {
- m501sk_gpio_clear(M501SK_DEBUG_LED3);
- m501sk_gpio_clear(M501SK_BUZZER);
- udelay(250);
- m501sk_gpio_set(M501SK_DEBUG_LED3);
- m501sk_gpio_set(M501SK_BUZZER);
- udelay(80);
- }
- m501sk_gpio_clear(M501SK_BUZZER);
- m501sk_gpio_clear(M501SK_DEBUG_LED3);
-
- return 0;
-}
-
-int board_late_init(void)
-{
-#if defined(CONFIG_CMD_NET)
- eth_init(gd->bd);
- eth_halt();
-#endif
-
- /* Protect U-Boot, kernel & ramdisk memory addresses */
- run_command("protect on 10000000 1041ffff", 0);
- return 0;
-}
-
-#ifdef CONFIG_DRIVER_ETHER
-#if defined(CONFIG_CMD_NET)
-/*
- * Name:
- * at91rm9200_GetPhyInterface
- * Description:
- * Initialise the interface functions to the PHY
- * Arguments:
- * None
- * Return value:
- * None
- */
-void at91rm9200_GetPhyInterface(AT91PS_PhyOps p_phyops)
-{
- p_phyops->Init = dm9161_InitPhy;
- p_phyops->IsPhyConnected = dm9161_IsPhyConnected;
- p_phyops->GetLinkSpeed = dm9161_GetLinkSpeed;
- p_phyops->AutoNegotiate = dm9161_AutoNegotiate;
-}
-#endif /* CONFIG_CMD_NET */
-#endif /* CONFIG_DRIVER_ETHER */
-
-#ifdef CONFIG_DRIVER_AT91EMAC
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
- rc = at91emac_register(bis, 0);
- return rc;
-}
-#endif
-#endif /* CONFIG_M501SK */
diff --git a/board/m501sk/m501sk.h b/board/m501sk/m501sk.h
deleted file mode 100644
index 51d10f5..0000000
--- a/board/m501sk/m501sk.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * linux/include/asm/arch-at91/hardware.h
- *
- * Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __M501SK_H
-#define __M501SK_H
-
-#ifndef __ASSEMBLY__
-#include <asm/arch-at91rm9200/AT91RM9200.h>
-#else
-#include <asm/arch-at91rm9200/AT91RM9200_inc.h>
-#endif
-
-#define AT91C_PIO_PA22 ((unsigned int) 1 << 22) /* Pin Controlled by PA22 */
-#define AT91C_PA22_RXD2 ((unsigned int) AT91C_PIO_PA22) /* USART 2 RxD */
-#define AT91C_PA5_TXD3 ((unsigned int) 1 << 5) /* USART 3 TxD */
-#define AT91C_PA6_RXD3 ((unsigned int) 1 << 6) /* USART 3 RxD */
-
-/* ========== Register definition for PIOD peripheral ========== */
-#define AT91C_PIOD_PDSR ((AT91_REG *) 0xFFFFFA3C) /* Pin Data stat Reg */
-#define AT91C_PIOD_CODR ((AT91_REG *) 0xFFFFFA34) /* Clear Output Data Reg */
-#define AT91C_PIOD_OWER ((AT91_REG *) 0xFFFFFAA0) /* Output Write Enable Reg */
-#define AT91C_PIOD_MDER ((AT91_REG *) 0xFFFFFA50) /* Multi-driver Enable Reg */
-#define AT91C_PIOD_IMR ((AT91_REG *) 0xFFFFFA48) /* Interrupt Mask Reg */
-#define AT91C_PIOD_IER ((AT91_REG *) 0xFFFFFA40) /* Interrupt Enable Reg */
-#define AT91C_PIOD_ODSR ((AT91_REG *) 0xFFFFFA38) /* Output Data stat Reg */
-#define AT91C_PIOD_SODR ((AT91_REG *) 0xFFFFFA30) /* Set Output Data Reg */
-#define AT91C_PIOD_PER ((AT91_REG *) 0xFFFFFA00) /* PIO Enable Reg */
-#define AT91C_PIOD_OWDR ((AT91_REG *) 0xFFFFFAA4) /* Output Write Disable Reg */
-#define AT91C_PIOD_PPUER ((AT91_REG *) 0xFFFFFA64) /* Pull-up Enable Reg */
-#define AT91C_PIOD_MDDR ((AT91_REG *) 0xFFFFFA54) /* Multi-driver Disable Reg */
-#define AT91C_PIOD_ISR ((AT91_REG *) 0xFFFFFA4C) /* Interrupt stat Reg */
-#define AT91C_PIOD_IDR ((AT91_REG *) 0xFFFFFA44) /* Interrupt Disable Reg */
-#define AT91C_PIOD_PDR ((AT91_REG *) 0xFFFFFA04) /* PIO Disable Reg */
-#define AT91C_PIOD_ODR ((AT91_REG *) 0xFFFFFA14) /* Output Disable Regr */
-#define AT91C_PIOD_OWSR ((AT91_REG *) 0xFFFFFAA8) /* Output Write stat Reg */
-#define AT91C_PIOD_ABSR ((AT91_REG *) 0xFFFFFA78) /* AB Select stat Reg */
-#define AT91C_PIOD_ASR ((AT91_REG *) 0xFFFFFA70) /* Select A Reg */
-#define AT91C_PIOD_PPUSR ((AT91_REG *) 0xFFFFFA68) /* Pad Pull-up stat Reg */
-#define AT91C_PIOD_PPUDR ((AT91_REG *) 0xFFFFFA60) /* Pull-up Disable Reg */
-#define AT91C_PIOD_MDSR ((AT91_REG *) 0xFFFFFA58) /* Multi-driver stat Reg */
-#define AT91C_PIOD_PSR ((AT91_REG *) 0xFFFFFA08) /* PIO stat Reg */
-#define AT91C_PIOD_OER ((AT91_REG *) 0xFFFFFA10) /* Output Enable Reg */
-#define AT91C_PIOD_OSR ((AT91_REG *) 0xFFFFFA18) /* Output stat Reg */
-#define AT91C_PIOD_IFER ((AT91_REG *) 0xFFFFFA20) /* Input Filter Enable Reg */
-#define AT91C_PIOD_BSR ((AT91_REG *) 0xFFFFFA74) /* Select B Reg */
-#define AT91C_PIOD_IFDR ((AT91_REG *) 0xFFFFFA24) /* Input Filter Disable Reg */
-#define AT91C_PIOD_IFSR ((AT91_REG *) 0xFFFFFA28) /* Input Filter stat Reg */
-
-#define AT91C_PIO_PD0 ((unsigned int) 1 << 0) /* Pin Controlled by PD0 */
-#define AT91C_PD0_ETX0 ((unsigned int) AT91C_PIO_PD0) /* Enet MAC Tx Data 0*/
-#define AT91C_PIO_PD1 ((unsigned int) 1 << 1) /* Pin Controlled by PD1 */
-#define AT91C_PD1_ETX1 ((unsigned int) AT91C_PIO_PD1) /* Enet MAC Tx Data 1*/
-#define AT91C_PIO_PD10 ((unsigned int) 1 << 10) /* Pin Controlled by PD10 */
-#define AT91C_PD10_PCK3 ((unsigned int) AT91C_PIO_PD10) /* PMC Prog Clk Oput 3*/
-#define AT91C_PD10_TPS1 ((unsigned int) AT91C_PIO_PD10) /* ETMARM9 pl stat1 */
-#define AT91C_PIO_PD11 ((unsigned int) 1 << 11) /* Pin Controlled by PD11 */
-#define AT91C_PD11_ ((unsigned int) AT91C_PIO_PD11) /* */
-#define AT91C_PD11_TPS2 ((unsigned int) AT91C_PIO_PD11) /* ETMARM9 pl stat2 */
-#define AT91C_PIO_PD12 ((unsigned int) 1 << 12) /* Pin Controlled by PD12 */
-#define AT91C_PD12_ ((unsigned int) AT91C_PIO_PD12) /* */
-#define AT91C_PD12_TPK0 ((unsigned int) AT91C_PIO_PD12) /* ETM Trace Pkt 0 */
-#define AT91C_PIO_PD13 ((unsigned int) 1 << 13) /* Pin Controlled by PD13 */
-#define AT91C_PD13_ ((unsigned int) AT91C_PIO_PD13) /* */
-#define AT91C_PD13_TPK1 ((unsigned int) AT91C_PIO_PD13) /* ETM Trace Pkt 1 */
-#define AT91C_PIO_PD14 ((unsigned int) 1 << 14) /* Pin Controlled by PD14 */
-#define AT91C_PD14_ ((unsigned int) AT91C_PIO_PD14) /* */
-#define AT91C_PD14_TPK2 ((unsigned int) AT91C_PIO_PD14) /* ETM Trace Pkt 2 */
-#define AT91C_PIO_PD15 ((unsigned int) 1 << 15) /* Pin Controlled by PD15 */
-#define AT91C_PD15_TD0 ((unsigned int) AT91C_PIO_PD15) /* SSC TxD */
-#define AT91C_PD15_TPK3 ((unsigned int) AT91C_PIO_PD15) /* ETM Trace Pkt 3 */
-#define AT91C_PIO_PD16 ((unsigned int) 1 << 16) /* Pin Controlled by PD16 */
-#define AT91C_PD16_TD1 ((unsigned int) AT91C_PIO_PD16) /* SSC TxD 1 */
-#define AT91C_PD16_TPK4 ((unsigned int) AT91C_PIO_PD16) /* ETM Trace Pkt 4 */
-#define AT91C_PIO_PD17 ((unsigned int) 1 << 17) /* Pin Controlled by PD17 */
-#define AT91C_PD17_TD2 ((unsigned int) AT91C_PIO_PD17) /* SSC TxD 2 */
-#define AT91C_PD17_TPK5 ((unsigned int) AT91C_PIO_PD17) /* ETM Trace Pkt 5 */
-#define AT91C_PIO_PD18 ((unsigned int) 1 << 18) /* Pin Controlled by PD18 */
-#define AT91C_PD18_NPCS1 ((unsigned int) AT91C_PIO_PD18) /* SPI Perip CS 1 */
-#define AT91C_PD18_TPK6 ((unsigned int) AT91C_PIO_PD18) /* ETM Trace Pkt 6 */
-#define AT91C_PIO_PD19 ((unsigned int) 1 << 19) /* Pin Controlled by PD19 */
-#define AT91C_PD19_NPCS2 ((unsigned int) AT91C_PIO_PD19) /* SPI Perip CS 2 */
-#define AT91C_PD19_TPK7 ((unsigned int) AT91C_PIO_PD19) /* ETM Trace Pkt 7 */
-#define AT91C_PIO_PD2 ((unsigned int) 1 << 2) /* Pin Controlled by PD2 */
-#define AT91C_PD2_ETX2 ((unsigned int) AT91C_PIO_PD2) /* Ethernet MAC TxD 2 */
-#define AT91C_PIO_PD20 ((unsigned int) 1 << 20) /* Pin Controlled by PD20 */
-#define AT91C_PD20_NPCS3 ((unsigned int) AT91C_PIO_PD20) /* SPI Perip CS 3 */
-#define AT91C_PD20_TPK8 ((unsigned int) AT91C_PIO_PD20) /* ETM Trace Pkt 8 */
-#define AT91C_PIO_PD21 ((unsigned int) 1 << 21) /* Pin Controlled by PD21 */
-#define AT91C_PD21_RTS0 ((unsigned int) AT91C_PIO_PD21) /* Usart 0 RTS */
-#define AT91C_PD21_TPK9 ((unsigned int) AT91C_PIO_PD21) /* ETM Trace Pkt 9 */
-#define AT91C_PIO_PD22 ((unsigned int) 1 << 22) /* Pin Controlled by PD22 */
-#define AT91C_PD22_RTS1 ((unsigned int) AT91C_PIO_PD22) /* Usart 0 RTS */
-#define AT91C_PD22_TPK10 ((unsigned int) AT91C_PIO_PD22) /* ETM Trace Pkt 10 */
-#define AT91C_PIO_PD23 ((unsigned int) 1 << 23) /* Pin Controlled by PD23 */
-#define AT91C_PD23_RTS2 ((unsigned int) AT91C_PIO_PD23) /* USART 2 RTS */
-#define AT91C_PD23_TPK11 ((unsigned int) AT91C_PIO_PD23) /* ETM Trace Pkt 11 */
-#define AT91C_PIO_PD24 ((unsigned int) 1 << 24) /* Pin Controlled by PD24 */
-#define AT91C_PD24_RTS3 ((unsigned int) AT91C_PIO_PD24) /* USART 3 RTS */
-#define AT91C_PD24_TPK12 ((unsigned int) AT91C_PIO_PD24) /* ETM Trace Pkt 12 */
-#define AT91C_PIO_PD25 ((unsigned int) 1 << 25) /* Pin Controlled by PD25 */
-#define AT91C_PD25_DTR1 ((unsigned int) AT91C_PIO_PD25) /* USART 1 DTR */
-#define AT91C_PD25_TPK13 ((unsigned int) AT91C_PIO_PD25) /* ETM Trace Pkt 13 */
-#define AT91C_PIO_PD26 ((unsigned int) 1 << 26) /* Pin Controlled by PD26 */
-#define AT91C_PD26_TPK14 ((unsigned int) AT91C_PIO_PD26) /* ETM Trace Pkt 14 */
-#define AT91C_PIO_PD27 ((unsigned int) 1 << 27) /* Pin Controlled by PD27 */
-#define AT91C_PD27_TPK15 ((unsigned int) AT91C_PIO_PD27) /* ETM Trace Pkt 15 */
-#define AT91C_PIO_PD3 ((unsigned int) 1 << 3) /* Pin Controlled by PD3 */
-#define AT91C_PD3_ETX3 ((unsigned int) AT91C_PIO_PD3) /* Enet MAC TxD 3 */
-#define AT91C_PIO_PD4 ((unsigned int) 1 << 4) /* Pin Controlled by PD4 */
-#define AT91C_PD4_ETXEN ((unsigned int) AT91C_PIO_PD4) /* Enet MAC TxEn */
-#define AT91C_PIO_PD5 ((unsigned int) 1 << 5) /* Pin Controlled by PD5 */
-#define AT91C_PD5_ETXER ((unsigned int) AT91C_PIO_PD5) /* Enet MAC TxCE */
-#define AT91C_PIO_PD6 ((unsigned int) 1 << 6) /* Pin Controlled by PD6 */
-#define AT91C_PD6_DTXD ((unsigned int) AT91C_PIO_PD6) /* DBGU Debug TxD */
-#define AT91C_PIO_PD7 ((unsigned int) 1 << 7) /* Pin Controlled by PD7 */
-#define AT91C_PD7_PCK0 ((unsigned int) AT91C_PIO_PD7) /* PMC Prog Clk Oput 0*/
-#define AT91C_PD7_TSYNC ((unsigned int) AT91C_PIO_PD7) /* ETM Sync signal */
-#define AT91C_PIO_PD8 ((unsigned int) 1 << 8) /* Pin Controlled by PD8 */
-#define AT91C_PD8_PCK1 ((unsigned int) AT91C_PIO_PD8) /* PMC Prog Clk Oput 1*/
-#define AT91C_PD8_TCLK ((unsigned int) AT91C_PIO_PD8) /* ETM Trace Clk sig */
-#define AT91C_PIO_PD9 ((unsigned int) 1 << 9) /* Pin Controlled by PD9 */
-#define AT91C_PD9_PCK2 ((unsigned int) AT91C_PIO_PD9) /* PMC Prog Clk 2 */
-#define AT91C_PD9_TPS0 ((unsigned int) AT91C_PIO_PD9) /* ETM ARM9 pl stat0 */
-#define AT91C_PIO_PB6 ((unsigned int) 1 << 6) /* Pin Controlled by PB6 */
-#define AT91C_PIO_PC5 ((unsigned int) 1 << 5)
-#define AT91C_PIO_PC14 ((unsigned int) 1 << 14) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PC15 ((unsigned int) 1 << 15) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PA19 ((unsigned int) 1 << 19) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PB2 ((unsigned int) 1 << 2) /* Pin Controlled by PC1 */
-#define AT91C_PIO_PB8 ((unsigned int) 1 << 8)
-#define AT91C_PIO_PB9 ((unsigned int) 1 << 9)
-#define AT91C_PIO_PB10 ((unsigned int) 1 << 10)
-#define AT91C_PIO_PB11 ((unsigned int) 1 << 11)
-#define AT91C_PIO_PB17 ((unsigned int) 1 << 17)
-#define AT91C_PIO_PB28 ((unsigned int) 1 << 28)
-#define AT91C_PIO_PB29 ((unsigned int) 1 << 29)
-
-typedef enum {
- M501SK_BUZZER = 38,
- M501SK_DEBUG_LED1 = 96,
- M501SK_DEBUG_LED2,
- M501SK_DEBUG_LED3,
- M501SK_DEBUG_LED4,
- M501SK_READY_LED = 102,
-} M501SK_PIO;
-
-void m501sk_gpio_init(void);
-uchar m501sk_gpio_set(M501SK_PIO io);
-uchar m501sk_gpio_clear(M501SK_PIO io);
-
-#endif
diff --git a/board/mx1fs2/Makefile b/board/mx1fs2/Makefile
deleted file mode 100644
index c55b695..0000000
--- a/board/mx1fs2/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := mx1fs2.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/mx1fs2/config.mk b/board/mx1fs2/config.mk
deleted file mode 100644
index eb4d046..0000000
--- a/board/mx1fs2/config.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# This config file is used for compilation of IMX sources
-#
-# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
-# This allows for example having one copy located at the end of ram and stored
-# in flash device and later on while developing use other location to test
-# the code in RAM device only.
-#
-
-CONFIG_SYS_TEXT_BASE = 0x08f00000
diff --git a/board/mx1fs2/flash.c b/board/mx1fs2/flash.c
deleted file mode 100644
index da4ebe6..0000000
--- a/board/mx1fs2/flash.c
+++ /dev/null
@@ -1,849 +0,0 @@
-/*
- * (C) 2000-2004 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) 2003 August Hoeraendl, Logotronic GmbH
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#undef CONFIG_FLASH_16BIT
-
-#include <common.h>
-
-#define FLASH_BANK_SIZE MX1FS2_FLASH_BANK_SIZE
-#define MAIN_SECT_SIZE MX1FS2_FLASH_SECT_SIZE
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*
- * NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- * has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-
-#define FLASH_ID_MASK 0xFFFF
-#else
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-
-#define FLASH_ID_MASK 0xFFFFFFFF
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK)
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-#if 0
-static ulong flash_get_size(FPWV * addr, flash_info_t * info);
-static void flash_get_offsets(ulong base, flash_info_t * info);
-#endif
-static void flash_reset(flash_info_t * info);
-static int write_word_intel(flash_info_t * info, FPWV * dest, FPW data);
-static int write_word_amd(flash_info_t * info, FPWV * dest, FPW data);
-#define write_word(in, de, da) write_word_amd(in, de, da)
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-static void flash_sync_real_protect(flash_info_t * info);
-#endif
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-ulong
-flash_init(void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (FLASH_MAN_AMD & FLASH_VENDMASK) |
- (FLASH_AM640U & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- switch (i) {
- case 0:
- flashbase = MX1FS2_FLASH_BASE;
- break;
- default:
- panic("configured too many flash banks!\n");
- break;
- }
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase + j * MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + _bss_start - _armboot_start,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void
-flash_reset(flash_info_t * info)
-{
- FPWV *base = (FPWV *) (info->start[0]);
-
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- *base = (FPW) 0x00FF00FF; /* Intel Read Mode */
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- *base = (FPW) 0x00F000F0; /* AMD Read Mode */
-}
-
-/*-----------------------------------------------------------------------
- */
-#if 0
-static void
-flash_get_offsets(ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
- && (info->flash_id & FLASH_BTYPE)) {
- int bootsect_size; /* number of bytes/boot sector */
- int sect_size; /* number of bytes/regular sector */
-
- bootsect_size = 0x00002000 * (sizeof (FPW) / 2);
- sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
- /* set sector offsets for bottom boot block type */
- for (i = 0; i < 8; ++i) {
- info->start[i] = base + (i * bootsect_size);
- }
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 7) * sect_size);
- }
- } else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
- && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
-
- int sect_size; /* number of bytes/sector */
-
- sect_size = 0x00010000 * (sizeof (FPW) / 2);
-
- /* set up sector start address table (uniform sector type) */
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * sect_size);
- }
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-
-void
-flash_print_info(flash_info_t * info)
-{
- int i;
- uchar *boottype;
- uchar *bootletter;
- char *fmt;
- uchar botbootletter[] = "B";
- uchar topbootletter[] = "T";
- uchar botboottype[] = "bottom boot sector";
- uchar topboottype[] = "top boot sector";
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- printf("AMD ");
- break;
- case FLASH_MAN_BM:
- printf("BRIGHT MICRO ");
- break;
- case FLASH_MAN_FUJ:
- printf("FUJITSU ");
- break;
- case FLASH_MAN_SST:
- printf("SST ");
- break;
- case FLASH_MAN_STM:
- printf("STM ");
- break;
- case FLASH_MAN_INTEL:
- printf("INTEL ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- /* check for top or bottom boot, if it applies */
- if (info->flash_id & FLASH_BTYPE) {
- boottype = botboottype;
- bootletter = botbootletter;
- } else {
- boottype = topboottype;
- bootletter = topbootletter;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM640U:
- fmt = "29LV641D (64 Mbit, uniform sectors)\n";
- break;
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- fmt = "28F800C3%s (8 Mbit, %s)\n";
- break;
- case FLASH_INTEL800B:
- case FLASH_INTEL800T:
- fmt = "28F800B3%s (8 Mbit, %s)\n";
- break;
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- fmt = "28F160C3%s (16 Mbit, %s)\n";
- break;
- case FLASH_INTEL160B:
- case FLASH_INTEL160T:
- fmt = "28F160B3%s (16 Mbit, %s)\n";
- break;
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- fmt = "28F320C3%s (32 Mbit, %s)\n";
- break;
- case FLASH_INTEL320B:
- case FLASH_INTEL320T:
- fmt = "28F320B3%s (32 Mbit, %s)\n";
- break;
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- fmt = "28F640C3%s (64 Mbit, %s)\n";
- break;
- case FLASH_INTEL640B:
- case FLASH_INTEL640T:
- fmt = "28F640B3%s (64 Mbit, %s)\n";
- break;
- default:
- fmt = "Unknown Chip Type\n";
- break;
- }
-
- printf(fmt, bootletter, boottype);
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
-
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf("\n ");
- }
-
- printf(" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
-
- printf("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-#if 0
-ulong
-flash_get_size(FPWV * addr, flash_info_t * info)
-{
- /* Write auto select command: read Manufacturer ID */
-
- /* Write auto select command sequence and test FLASH answer */
- addr[0x0555] = (FPW) 0x00AA00AA; /* for AMD, Intel ignores this */
- addr[0x02AA] = (FPW) 0x00550055; /* for AMD, Intel ignores this */
- addr[0x0555] = (FPW) 0x00900090; /* selects Intel or AMD */
-
- /* The manufacturer codes are only 1 byte, so just use 1 byte.
- * This works for any bus width and any FLASH device width.
- */
- switch (addr[0] & 0xff) {
-
- case (uchar) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (uchar) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
- }
-
- /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
- if (info->flash_id != FLASH_UNKNOWN)
- switch (addr[1]) {
-
- case (FPW) AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
- info->flash_id += FLASH_AM640U;
- info->sector_count = 128;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- case (FPW) INTEL_ID_28F800C3B:
- info->flash_id += FLASH_28F800C3B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof (FPW) / 2);
- break; /* => 1 or 2 MB */
-
- case (FPW) INTEL_ID_28F800B3B:
- info->flash_id += FLASH_INTEL800B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof (FPW) / 2);
- break; /* => 1 or 2 MB */
-
- case (FPW) INTEL_ID_28F160C3B:
- info->flash_id += FLASH_28F160C3B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof (FPW) / 2);
- break; /* => 2 or 4 MB */
-
- case (FPW) INTEL_ID_28F160B3B:
- info->flash_id += FLASH_INTEL160B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof (FPW) / 2);
- break; /* => 2 or 4 MB */
-
- case (FPW) INTEL_ID_28F320C3B:
- info->flash_id += FLASH_28F320C3B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof (FPW) / 2);
- break; /* => 4 or 8 MB */
-
- case (FPW) INTEL_ID_28F320B3B:
- info->flash_id += FLASH_INTEL320B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof (FPW) / 2);
- break; /* => 4 or 8 MB */
-
- case (FPW) INTEL_ID_28F640C3B:
- info->flash_id += FLASH_28F640C3B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- case (FPW) INTEL_ID_28F640B3B:
- info->flash_id += FLASH_INTEL640B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof (FPW) / 2);
- break; /* => 8 or 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* => no or unknown flash */
- }
-
- flash_get_offsets((ulong) addr, info);
-
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-#endif /* 0 */
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-
-static void
-flash_sync_real_protect(flash_info_t * info)
-{
- FPWV *addr = (FPWV *) (info->start[0]);
- FPWV *sect;
- int i;
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- /* check for protected sectors */
- *addr = (FPW) 0x00900090;
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02.
- * D0 = 1 for each device if protected.
- * If at least one device is protected the sector is marked
- * protected, but mixed protected and unprotected devices
- * within a sector should never happen.
- */
- sect = (FPWV *) (info->start[i]);
- info->protect[i] =
- (sect[2] & (FPW) (0x00010001)) ? 1 : 0;
- }
-
- /* Put FLASH back in read mode */
- flash_reset(info);
- break;
-
- case FLASH_AM640U:
- default:
- /* no hardware protect that we support */
- break;
- }
-}
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-int
-flash_erase(flash_info_t * info, int s_first, int s_last)
-{
- FPWV *addr;
- int flag, prot, sect;
- int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
- ulong start, now, last;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf("- missing\n");
- } else {
- printf("- no sectors to erase\n");
- }
- return 1;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_INTEL800B:
- case FLASH_INTEL160B:
- case FLASH_INTEL320B:
- case FLASH_INTEL640B:
- case FLASH_28F800C3B:
- case FLASH_28F160C3B:
- case FLASH_28F320C3B:
- case FLASH_28F640C3B:
- case FLASH_AM640U:
- break;
- case FLASH_UNKNOWN:
- default:
- printf("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf("\n");
- }
-
- start = get_timer(0);
- last = start;
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && rcode == 0; sect++) {
-
- if (info->protect[sect] != 0) /* protected, skip it */
- continue;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- addr = (FPWV *) (info->start[sect]);
- if (intel) {
- *addr = (FPW) 0x00500050; /* clear status register */
- *addr = (FPW) 0x00200020; /* erase setup */
- *addr = (FPW) 0x00D000D0; /* erase confirm */
- } else {
- /* must be AMD style if not Intel */
- FPWV *base; /* first address in bank */
-
- base = (FPWV *) (info->start[0]);
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- base[0x0555] = (FPW) 0x00800080; /* erase mode */
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- *addr = (FPW) 0x00300030; /* erase sector */
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 50us for AMD, 80us for Intel.
- * Let's wait 1 ms.
- */
- udelay(1000);
-
- while ((*addr & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if ((now = get_timer(0)) - start > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf("Timeout\n");
-
- if (intel) {
- /* suspend erase */
- *addr = (FPW) 0x00B000B0;
- }
-
- flash_reset(info); /* reset to read mode */
- rcode = 1; /* failed */
- break;
- }
-
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc('.');
- last = now;
- }
- }
-
- flash_reset(info); /* reset to read mode */
- }
-
- printf(" done\n");
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int
-bad_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
- int bytes; /* number of bytes to program in current word */
- int left; /* number of bytes left to program */
- int i, res;
-
- for (left = cnt, res = 0;
- left > 0 && res == 0;
- addr += sizeof (data), left -= sizeof (data) - bytes) {
-
- bytes = addr & (sizeof (data) - 1);
- addr &= ~(sizeof (data) - 1);
-
- /* combine source and destination data so can program
- * an entire word of 16 or 32 bits
- */
- for (i = 0; i < sizeof (data); i++) {
- data <<= 8;
- if (i < bytes || i - bytes >= left)
- data += *((uchar *) addr + i);
- else
- data += *src++;
- }
-
- /* write one word to the flash */
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- res = write_word_amd(info, (FPWV *) addr, data);
- break;
- case FLASH_MAN_INTEL:
- res = write_word_intel(info, (FPWV *) addr, data);
- break;
- default:
- /* unknown flash type, error! */
- printf("missing or unknown FLASH type\n");
- res = 1; /* not really a timeout, but gives error */
- break;
- }
- }
-
- return (res);
-}
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src: source of copy transaction
- * @param addr: where to copy to
- * @param cnt: number of bytes to copy
- *
- * @return error code
- */
-
-int
-write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
-
- /* handle unaligned start bytes */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /* handle word aligned part */
- while (cnt >= 2) {
- /* data = *((vushort*)src); */
- data = *((FPW *) src);
- if ((rc = write_word(info, (FPWV *)wp, data)) != 0) {
- return (rc);
- }
- src += sizeof (FPW);
- wp += sizeof (FPW);
- cnt -= sizeof (FPW);
- }
-
- if (cnt == 0)
- return ERR_OK;
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_word(info, (FPWV *)wp, data);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int
-write_word_amd(flash_info_t * info, FPWV * dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
- FPWV *base; /* first address in flash bank */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- base = (FPWV *) (info->start[0]);
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- base[0x0555] = (FPW) 0x00AA00AA; /* unlock */
- base[0x02AA] = (FPW) 0x00550055; /* unlock */
- base[0x0555] = (FPW) 0x00A000A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- /* data polling for D7 */
- while (res == 0
- && (*dest & (FPW) 0x00800080) != (data & (FPW) 0x00800080)) {
- if (get_timer(0) - start > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW) 0x00F000F0; /* reset bank */
- printf("SHA timeout\n");
- res = 1;
- }
- }
-
- return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for Intel FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int
-write_word_intel(flash_info_t * info, FPWV * dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- *dest = (FPW) 0x00500050; /* clear status register */
- *dest = (FPW) 0x00FF00FF; /* make sure in read mode */
- *dest = (FPW) 0x00400040; /* program setup */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- while (res == 0 && (*dest & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *dest = (FPW) 0x00B000B0; /* Suspend program */
- res = 1;
- }
- }
-
- if (res == 0 && (*dest & (FPW) 0x00100010))
- res = 1; /* write failed, time out error is close enough */
-
- *dest = (FPW) 0x00500050; /* clear status register */
- *dest = (FPW) 0x00FF00FF; /* make sure in read mode */
-
- return (res);
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-/*-----------------------------------------------------------------------
- */
-int
-flash_real_protect(flash_info_t * info, long sector, int prot)
-{
- int rcode = 0; /* assume success */
- FPWV *addr; /* address of sector */
- FPW value;
-
- addr = (FPWV *) (info->start[sector]);
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- flash_reset(info); /* make sure in read mode */
- *addr = (FPW) 0x00600060L; /* lock command setup */
- if (prot)
- *addr = (FPW) 0x00010001L; /* lock sector */
- else
- *addr = (FPW) 0x00D000D0L; /* unlock sector */
- flash_reset(info); /* reset to read mode */
-
- /* now see if it really is locked/unlocked as requested */
- *addr = (FPW) 0x00900090;
- /* read sector protection at sector address, (A7 .. A0) = 0x02.
- * D0 = 1 for each device if protected.
- * If at least one device is protected the sector is marked
- * protected, but return failure. Mixed protected and
- * unprotected devices within a sector should never happen.
- */
- value = addr[2] & (FPW) 0x00010001;
- if (value == 0)
- info->protect[sector] = 0;
- else if (value == (FPW) 0x00010001)
- info->protect[sector] = 1;
- else {
- /* error, mixed protected and unprotected */
- rcode = 1;
- info->protect[sector] = 1;
- }
- if (info->protect[sector] != prot)
- rcode = 1; /* failed to protect/unprotect as requested */
-
- /* reload all protection bits from hardware for now */
- flash_sync_real_protect(info);
- break;
-
- case FLASH_AM640U:
- default:
- /* no hardware protect that we support */
- info->protect[sector] = prot;
- break;
- }
-
- return rcode;
-}
-#endif
diff --git a/board/mx1fs2/intel.h b/board/mx1fs2/intel.h
deleted file mode 100644
index 8db5dd4..0000000
--- a/board/mx1fs2/intel.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * Copyright (C) 2002 ETC s.r.o.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the name of the ETC s.r.o. nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * Written by Marcel Telka <marcel@telka.sk>, 2002.
- *
- * Documentation:
- * [1] Intel Corporation, "3 Volt Intel Strata Flash Memory 28F128J3A, 28F640J3A,
- * 28F320J3A (x8/x16)", April 2002, Order Number: 290667-011
- * [2] Intel Corporation, "3 Volt Synchronous Intel Strata Flash Memory 28F640K3, 28F640K18,
- * 28F128K3, 28F128K18, 28F256K3, 28F256K18 (x16)", June 2002, Order Number: 290737-005
- *
- * This file is taken from OpenWinCE project hosted by SourceForge.net
- *
- */
-
-#ifndef FLASH_INTEL_H
-#define FLASH_INTEL_H
-
-#include <common.h>
-
-/* Intel CFI commands - see Table 4. in [1] and Table 3. in [2] */
-
-#define CFI_INTEL_CMD_READ_ARRAY 0xFF /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_IDENTIFIER 0x90 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_QUERY 0x98 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_READ_STATUS_REGISTER 0x70 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_CLEAR_STATUS_REGISTER 0x50 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_PROGRAM1 0x40 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_PROGRAM2 0x10 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_WRITE_TO_BUFFER 0xE8 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_CONFIRM 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_BLOCK_ERASE 0x20 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_SUSPEND 0xB0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_RESUME 0xD0 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_SETUP 0x60 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_BLOCK 0x01 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_UNLOCK_BLOCK 0xD0 /* 28FxxxJ3A - unlocks all blocks, 28FFxxxK3, 28FxxxK18 */
-#define CFI_INTEL_CMD_LOCK_DOWN_BLOCK 0x2F /* 28FxxxK3, 28FxxxK18 */
-
-/* Intel CFI Status Register bits - see Table 6. in [1] and Table 7. in [2] */
-
-#define CFI_INTEL_SR_READY 1 << 7 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_ERASE_SUSPEND 1 << 6 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_ERASE_ERROR 1 << 5 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_PROGRAM_ERROR 1 << 4 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_VPEN_ERROR 1 << 3 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_PROGRAM_SUSPEND 1 << 2 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_BLOCK_LOCKED 1 << 1 /* 28FxxxJ3A, 28FxxxK3, 28FxxxK18 */
-#define CFI_INTEL_SR_BEFP 1 << 0 /* 28FxxxK3, 28FxxxK18 */
-
-/* Intel flash device ID codes for 28FxxxJ3A - see Table 5. in [1] */
-
-#define CFI_CHIP_INTEL_28F320J3A 0x0016
-#define CFI_CHIPN_INTEL_28F320J3A "28F320J3A"
-#define CFI_CHIP_INTEL_28F640J3A 0x0017
-#define CFI_CHIPN_INTEL_28F640J3A "28F640J3A"
-#define CFI_CHIP_INTEL_28F128J3A 0x0018
-#define CFI_CHIPN_INTEL_28F128J3A "28F128J3A"
-
-/* Intel flash device ID codes for 28FxxxK3 and 28FxxxK18 - see Table 8. in [2] */
-
-#define CFI_CHIP_INTEL_28F640K3 0x8801
-#define CFI_CHIPN_INTEL_28F640K3 "28F640K3"
-#define CFI_CHIP_INTEL_28F128K3 0x8802
-#define CFI_CHIPN_INTEL_28F128K3 "28F128K3"
-#define CFI_CHIP_INTEL_28F256K3 0x8803
-#define CFI_CHIPN_INTEL_28F256K3 "28F256K3"
-#define CFI_CHIP_INTEL_28F640K18 0x8805
-#define CFI_CHIPN_INTEL_28F640K18 "28F640K18"
-#define CFI_CHIP_INTEL_28F128K18 0x8806
-#define CFI_CHIPN_INTEL_28F128K18 "28F128K18"
-#define CFI_CHIP_INTEL_28F256K18 0x8807
-#define CFI_CHIPN_INTEL_28F256K18 "28F256K18"
-
-#endif /* FLASH_INTEL_H */
diff --git a/board/mx1fs2/lowlevel_init.S b/board/mx1fs2/lowlevel_init.S
deleted file mode 100644
index 56a4819..0000000
--- a/board/mx1fs2/lowlevel_init.S
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
- * 02111-1307, USA.
- *
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/imx-regs.h>
-
-.globl lowlevel_init
-lowlevel_init:
-
- mov r10, lr
-
-/* Change PERCLK1DIV to 14 ie 14+1 */
- ldr r0, =PCDR
- ldr r1, =CONFIG_SYS_PCDR_VAL
- str r1, [r0]
-
-/* set MCU PLL Control Register 0 */
-
- ldr r0, =MPCTL0
- ldr r1, =CONFIG_SYS_MPCTL0_VAL
- str r1, [r0]
-
-/* set MCU PLL Control Register 1 */
-
- ldr r0, =MPCTL1
- ldr r1, =CONFIG_SYS_MPCTL1_VAL
- str r1, [r0]
-
-/* set mpll restart bit */
- ldr r0, =CSCR
- ldr r1, [r0]
- orr r1,r1,#(1<<21)
- str r1, [r0]
-
- mov r2,#0x10
-1:
- mov r3,#0x2000
-2:
- subs r3,r3,#1
- bne 2b
-
- subs r2,r2,#1
- bne 1b
-
-/* set System PLL Control Register 0 */
-
- ldr r0, =SPCTL0
- ldr r1, =CONFIG_SYS_SPCTL0_VAL
- str r1, [r0]
-
-/* set System PLL Control Register 1 */
-
- ldr r0, =SPCTL1
- ldr r1, =CONFIG_SYS_SPCTL1_VAL
- str r1, [r0]
-
-/* set spll restart bit */
- ldr r0, =CSCR
- ldr r1, [r0]
- orr r1,r1,#(1<<22)
- str r1, [r0]
-
- mov r2,#0x10
-1:
- mov r3,#0x2000
-2:
- subs r3,r3,#1
- bne 2b
-
- subs r2,r2,#1
- bne 1b
-
- ldr r0, =CSCR
- ldr r1, =CONFIG_SYS_CSCR_VAL
- str r1, [r0]
-
- ldr r0, =GPCR
- ldr r1, =CONFIG_SYS_GPCR_VAL
- str r1, [r0]
-
-/*
- * I have now read the ARM920 DataSheet back-to-Back, and have stumbled upon
- * this.....
- *
- * It would appear that from a Cold-Boot the ARM920T enters "FastBus" mode CP15
- * register 1, this stops it using the output of the PLL and thus runs at the
- * slow rate. Unless you place the Core into "Asynch" mode, the CPU will never
- * use the value set in the CM_OSC registers...regardless of what you set it
- * too! Thus, although i thought i was running at 140MHz, i'm actually running
- * at 40!..
- *
- * Slapping this into my bootloader does the trick...
- *
- * MRC p15,0,r0,c1,c0,0 ; read core configuration register
- * ORR r0,r0,#0xC0000000 ; set asynchronous clocks and not fastbus mode
- * MCR p15,0,r0,c1,c0,0 ; write modified value to core configuration
- * register
- *
- */
- MRC p15,0,r0,c1,c0,0
-/* ORR r0,r0,#0xC0000000 async mode */
-/* ORR r0,r0,#0x40000000 sync mode */
- ORR r0,r0,#0xC0000000
- MCR p15,0,r0,c1,c0,0
-
- ldr r0, =GIUS(0)
- ldr r1, =CONFIG_SYS_GIUS_A_VAL
- str r1, [r0]
-
- ldr r0, =FMCR
- ldr r1, =CONFIG_SYS_FMCR_VAL
- str r1, [r0]
-
- ldr r0, =CS0U
- ldr r1, =CONFIG_SYS_CS0U_VAL
- str r1, [r0]
-
- ldr r0, =CS0L
- ldr r1, =CONFIG_SYS_CS0L_VAL
- str r1, [r0]
-
- ldr r0, =CS1U
- ldr r1, =CONFIG_SYS_CS1U_VAL
- str r1, [r0]
-
- ldr r0, =CS1L
- ldr r1, =CONFIG_SYS_CS1L_VAL
- str r1, [r0]
-
- ldr r0, =CS4U
- ldr r1, =CONFIG_SYS_CS4U_VAL
- str r1, [r0]
-
- ldr r0, =CS4L
- ldr r1, =CONFIG_SYS_CS4L_VAL
- str r1, [r0]
-
- ldr r0, =CS5U
- ldr r1, =CONFIG_SYS_CS5U_VAL
- str r1, [r0]
-
- ldr r0, =CS5L
- ldr r1, =CONFIG_SYS_CS5L_VAL
- str r1, [r0]
-
-/* SDRAM Setup */
-
- ldr r1,=0x00221000 /* adr of SDCTRL0 */
- ldr r0,=0x92120200
- str r0,[r1,#0] /* put in precharge command mode */
- ldr r2,=0x08200000 /* adr for precharge cmd */
- ldr r0,[r2,#0] /* precharge */
- ldr r0,=0xA2120200
- ldr r2,=0x08000000 /* start of SDRAM */
- str r0,[r1,#0] /* put in auto-refresh mode */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,[r2,#0] /* auto-refresh */
- ldr r0,=0xB2120200
- ldr r2,=0x08111800
- str r0,[r1,#0] /* setup for mode register of SDRAM */
- ldr r0,[r2,#0] /* program mode register */
- ldr r0,=0x82124267
- str r0,[r1,#0] /* back to normal operation */
-
- mov pc,r10
diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c
deleted file mode 100644
index 90a33c2..0000000
--- a/board/mx1fs2/mx1fs2.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/arch/imx-regs.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-
-extern void imx_gpio_mode(int gpio_mode);
-
-static void logo_init(void)
-{
- imx_gpio_mode(PD15_PF_LD0);
- imx_gpio_mode(PD16_PF_LD1);
- imx_gpio_mode(PD17_PF_LD2);
- imx_gpio_mode(PD18_PF_LD3);
- imx_gpio_mode(PD19_PF_LD4);
- imx_gpio_mode(PD20_PF_LD5);
- imx_gpio_mode(PD21_PF_LD6);
- imx_gpio_mode(PD22_PF_LD7);
- imx_gpio_mode(PD23_PF_LD8);
- imx_gpio_mode(PD24_PF_LD9);
- imx_gpio_mode(PD25_PF_LD10);
- imx_gpio_mode(PD26_PF_LD11);
- imx_gpio_mode(PD27_PF_LD12);
- imx_gpio_mode(PD28_PF_LD13);
- imx_gpio_mode(PD29_PF_LD14);
- imx_gpio_mode(PD30_PF_LD15);
- imx_gpio_mode(PD14_PF_FLM_VSYNC);
- imx_gpio_mode(PD13_PF_LP_HSYNC);
- imx_gpio_mode(PD6_PF_LSCLK);
- imx_gpio_mode(GPIO_PORTD | GPIO_OUT | GPIO_DR);
- imx_gpio_mode(PD11_PF_CONTRAST);
- imx_gpio_mode(PD10_PF_SPL_SPR);
-
- LCDC_RMCR = 0x00000000;
- LCDC_PCR = PCR_COLOR | PCR_PBSIZ_8 | PCR_BPIX_16 | PCR_PCD(5);
- LCDC_HCR = HCR_H_WIDTH(2);
- LCDC_VCR = VCR_V_WIDTH(2);
-
- LCDC_PWMR = 0x00000380; /* contrast to 0x80 middle (is best !!!) */
- LCDC_SSA = 0x10040000; /* image in flash */
-
- LCDC_SIZE = SIZE_XMAX(320) | SIZE_YMAX(240); /* screen size */
-
- LCDC_VPW = 0x000000A0; /* Virtual Page Width Register */
- LCDC_POS = 0x00000000; /* panning offset 0 (0 pixel offset) */
-
- /* disable Cursor */
- LCDC_CPOS = 0x00000000;
-
- /* fixed burst length */
- LCDC_DMACR = DMACR_BURST | DMACR_HM(8) | DMACR_TM(2);
-
- /* enable LCD */
- DR(3) |= 0x00001000;
- LCDC_RMCR = RMCR_LCDC_EN;
-
-}
-
-int
-board_init(void)
-{
- gd->bd->bi_arch_number = MACH_TYPE_MX1FS2;
- gd->bd->bi_boot_params = 0x08000100;
-serial_init();
- logo_init();
- return 0;
-}
-
-int
-dram_init(void)
-{
-#if ( CONFIG_NR_DRAM_BANKS > 0 )
- gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1;
- gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE;
-#endif
- return 0;
-}
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- */
-
-void
-show_boot_progress(int status)
-{
- /* We use this as a hook to disable serial ports just before booting
- * This way we suppress the "uncompressing linux..." message
- */
-#ifdef CONFIG_SILENT_CONSOLE
- if( status == 8) {
- if( getenv("silent") != NULL ) {
- *(volatile unsigned long *)0x206080 &= ~1;
- *(volatile unsigned long *)0x207080 &= ~1;
- }
- }
-#endif
- return;
-}
diff --git a/board/netstar/Makefile b/board/netstar/Makefile
deleted file mode 100644
index 7230a2f..0000000
--- a/board/netstar/Makefile
+++ /dev/null
@@ -1,95 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2005
-# Ladislav Michl, 2N Telekomunikace, michl@2n.cz
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := netstar.o
-SOBJS := setup.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-LOAD_ADDR = 0x10400000
-
-#########################################################################
-
-all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin \
- $(obj)crcek.srec $(obj)crcek.bin $(obj)crcit
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $^)
-
-$(obj)eeprom_start.o:
- echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
-
-$(obj)eeprom: $(obj)eeprom_start.o $(obj)eeprom.o
- $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \
- -L$(obj)../../examples/standalone -lstubs \
- $(PLATFORM_LIBS)
-
-$(obj)eeprom.srec: $(obj)eeprom
- $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)eeprom.bin: $(obj)eeprom
- $(OBJCOPY) -S -O binary $< $@
-
-$(obj)crcek.srec: $(obj)crcek.o
- $(LD) -g -Ttext 0x00000000 -e crcek -o $(<:.o=) $^
- $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)crcek.bin: $(obj)crcek.srec
- $(OBJCOPY) -I srec -O binary $< $@
-
-$(obj)crcit: $(obj)crcit.o $(obj)crc32.o
- $(HOSTCC) $(HOSTCFLAGS) -o $@ $^
-
-$(obj)crcit.o: crcit.c
- $(HOSTCC) $(HOSTCFLAGS) -o $@ -c $<
-
-$(obj)crc32.o: $(SRCTREE)/lib/crc32.c
- $(HOSTCC) $(HOSTCFLAGS) -DUSE_HOSTCC -I$(TOPDIR)/include \
- -o $@ -c $<
-
-clean:
- rm -f $(SOBJS) $(OBJS) \
- $(obj)eeprom_start.o $(obj)eeprom.o \
- $(obj)eeprom $(obj)eeprom.srec $(obj)eeprom.bin \
- $(obj)crcek.o $(obj)crcek $(obj)crcek.srec $(obj)crcek.bin
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/netstar/config.mk b/board/netstar/config.mk
deleted file mode 100644
index 9e1446e..0000000
--- a/board/netstar/config.mk
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Linux-Kernel is expected to be at 1000'8000,
-# entry 1000'8000 (mem base + reserved)
-#
-# We load ourself to internal RAM at 2001'2000
-# Check map file when changing CONFIG_SYS_TEXT_BASE.
-# Everything has fit into 192kB internal SRAM!
-#
-
-# XXX CONFIG_SYS_TEXT_BASE = 0x20012000
-CONFIG_SYS_TEXT_BASE = 0x13FC0000
diff --git a/board/netstar/crcek.S b/board/netstar/crcek.S
deleted file mode 100644
index af35662..0000000
--- a/board/netstar/crcek.S
+++ /dev/null
@@ -1,241 +0,0 @@
-/**
- * (C) Copyright 2005
- * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2.
- *
- * Image layout looks like following:
- * u32 - size
- * u32 - version
- * ... - data
- * u32 - crc32
- */
-
-#include <config.h>
-#include "crcek.h"
-
-/**
- * do_crc32 - calculate CRC32 of given buffer
- * r0 - crc
- * r1 - pointer to buffer
- * r2 - buffer len
- */
- .macro do_crc32
- ldr r5, FFFFFFFF
- eor r0, r0, r5
- adr r3, CRC32_TABLE
-1:
- ldrb r4, [r1], #1
- eor r4, r4, r0
- and r4, r4, #0xff
- ldr r4, [r3, r4, lsl#2]
- eor r0, r4, r0, lsr#8
- subs r2, r2, #0x1
- bne 1b
- eor r0, r0, r5
- .endm
-
- .macro crcuj, offset, size
- mov r0, #0
- ldr r1, \offset
- ldr r2, [r1], #4
- cmp r2, r0 @ no data, no problem
- beq 2f
- tst r2, #3 @ unaligned size
- bne 2f
- ldr r3, \size
- cmp r2, r3 @ bogus size
- bhi 2f
- do_crc32
- ldr r1, [r1]
-2:
- cmp r0, r1
- .endm
-
- .macro wait, reg
- mov \reg, #0x100000
-3:
- subs \reg, \reg, #0x1
- bne 3b
- .endm
-
-.text
-.globl crcek
-crcek:
- /* Enable I-cache */
- mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
- mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
- mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
- orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
- mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
- mov r1, #0x00
- mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
- nop
- nop
- nop
- nop
-
- /* Setup clocking mode */
- ldr r0, MPU_CLKM_BASE @ base of CLOCK unit
- ldrh r1, [r0, #0x18] @ ARM_SYST - get reset status
- bic r1, r1, #(7 << 11) @ clear clock select
- orr r1, r1, #(2 << 11) @ set synchronous scalable
- mov r2, #0
-loop:
- cmp r2, #1 @ this loop will wait for at least 100 cycles
- streqh r1, [r0, #0x18] @ before issuing next request from MPU
- add r2, r2, #1 @ on the 1st run code is loaded into I-cache
- cmp r2, #16 @ and second run will set clocking mode
- bne loop
- nop
-
- /* Setup clock dividers */
- ldr r1, CKCTL_VAL
- orr r1, r1, #0x2000 @ enable DSP clock
- strh r1, [r0] @ setup clock divisors
-
- /* Setup DPLL to generate requested freq */
- ldr r0, DPLL1_BASE @ base of DPLL1 register
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
- orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
- strh r1, [r0] @ write
-
-locking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #0x01
- beq locking @ while LOCK not set
-
- /* Enable clock */
- ldr r0, MPU_CLKM_BASE @ base of CLOCK unit
- mov r1, #(1 << 10) @ disable idle mode do not check
- @ nWAKEUP pin, other remain active
- strh r1, [r0, #0x04]
- ldr r1, EN_CLK_VAL
- strh r1, [r0, #0x08]
- mov r1, #0x003f @ FLASH.RP not enabled in idle and
- strh r1, [r0, #0x0c] @ max delayed ( 32 x CLKIN )
-
-
- mov r6, #0
- crcuj _LOADER1_OFFSET, _LOADER_SIZE
- bne crc1_bad
- orr r6, r6, #1
-crc1_bad:
- crcuj _LOADER2_OFFSET, _LOADER_SIZE
- bne crc2_bad
- orr r6, r6, #2
-crc2_bad:
- ldr r3, _LOADER1_OFFSET
- ldr r4, _LOADER2_OFFSET
- teq r6, #3
- bne one_is_bad @ one of them (or both) has bad crc
- ldr r1, [r3, #4]
- ldr r2, [r4, #4]
- cmp r1, r2 @ boot 2nd loader if versions differ
- beq boot_1st
- b boot_2nd
-one_is_bad:
- tst r6, #1
- bne boot_1st
- tst r6, #2
- bne boot_2nd
-@ We are doomed, so let user know.
-hell:
- ldr r0, GPIO_BASE @ configure GPIO pins
- ldr r1, GPIO_DIRECTION
- strh r1, [r0, #0x08]
-blink_loop:
- mov r1, #0x08
- strh r1, [r0, #0x04]
- wait r3
- mov r1, #0x10
- strh r1, [r0, #0x04]
- wait r3
- b blink_loop
-boot_1st:
- add pc, r3, #8
-boot_2nd:
- add pc, r4, #8
-
-_LOADER_SIZE:
- .word LOADER_SIZE - 8 @ minus size and crc32
-_LOADER1_OFFSET:
- .word LOADER1_OFFSET
-_LOADER2_OFFSET:
- .word LOADER2_OFFSET
-
-FFFFFFFF:
- .word 0xffffffff
-CRC32_TABLE:
- .word 0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419
- .word 0x706af48f, 0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4
- .word 0xe0d5e91e, 0x97d2d988, 0x09b64c2b, 0x7eb17cbd, 0xe7b82d07
- .word 0x90bf1d91, 0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de
- .word 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7, 0x136c9856
- .word 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9
- .word 0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4
- .word 0xa2677172, 0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b
- .word 0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940, 0x32d86ce3
- .word 0x45df5c75, 0xdcd60dcf, 0xabd13d59, 0x26d930ac, 0x51de003a
- .word 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423, 0xcfba9599
- .word 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924
- .word 0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190
- .word 0x01db7106, 0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f
- .word 0x9fbfe4a5, 0xe8b8d433, 0x7807c9a2, 0x0f00f934, 0x9609a88e
- .word 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01
- .word 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e, 0x6c0695ed
- .word 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950
- .word 0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3
- .word 0xfbd44c65, 0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2
- .word 0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a
- .word 0x346ed9fc, 0xad678846, 0xda60b8d0, 0x44042d73, 0x33031de5
- .word 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa, 0xbe0b1010
- .word 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f
- .word 0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17
- .word 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6
- .word 0x03b6e20c, 0x74b1d29a, 0xead54739, 0x9dd277af, 0x04db2615
- .word 0x73dc1683, 0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8
- .word 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1, 0xf00f9344
- .word 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb
- .word 0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a
- .word 0x67dd4acc, 0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5
- .word 0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252, 0xd1bb67f1
- .word 0xa6bc5767, 0x3fb506dd, 0x48b2364b, 0xd80d2bda, 0xaf0a1b4c
- .word 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55, 0x316e8eef
- .word 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236
- .word 0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe
- .word 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31
- .word 0x2cd99e8b, 0x5bdeae1d, 0x9b64c2b0, 0xec63f226, 0x756aa39c
- .word 0x026d930a, 0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713
- .word 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38, 0x92d28e9b
- .word 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242
- .word 0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1
- .word 0x18b74777, 0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c
- .word 0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45, 0xa00ae278
- .word 0xd70dd2ee, 0x4e048354, 0x3903b3c2, 0xa7672661, 0xd06016f7
- .word 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc, 0x40df0b66
- .word 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9
- .word 0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605
- .word 0xcdd70693, 0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8
- .word 0x5d681b02, 0x2a6f2b94, 0xb40bbe37, 0xc30c8ea1, 0x5a05df1b
- .word 0x2d02ef8d
-
-GPIO_BASE:
- .word 0xfffce000
-MPU_CLKM_BASE:
- .word 0xfffece00
-DPLL1_BASE:
- .word 0xfffecf00
-
-CKCTL_VAL:
- .word OMAP5910_ARM_CKCTL
-EN_CLK_VAL:
- .word OMAP5910_ARM_EN_CLK
-GPIO_DIRECTION:
- .word 0x0000ffe7
-
-.end
diff --git a/board/netstar/crcek.h b/board/netstar/crcek.h
deleted file mode 100644
index 30c0860..0000000
--- a/board/netstar/crcek.h
+++ /dev/null
@@ -1,3 +0,0 @@
-#define LOADER_SIZE (448 * 1024)
-#define LOADER1_OFFSET (128 * 1024)
-#define LOADER2_OFFSET (LOADER1_OFFSET + LOADER_SIZE)
diff --git a/board/netstar/crcit.c b/board/netstar/crcit.c
deleted file mode 100644
index a162649..0000000
--- a/board/netstar/crcit.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * (C) Copyright 2005
- * 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdint.h>
-#include <fcntl.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include "crcek.h"
-
-extern uint32_t crc32(uint32_t, const unsigned char *, uint);
-
-static uint32_t data[LOADER_SIZE/4 + 3];
-
-static int do_crc(char *path, unsigned version)
-{
- uint32_t *p;
- ssize_t size;
- int fd;
-
- fd = open(path, O_RDONLY);
- if (fd == -1) {
- perror("Error opening file");
- return EXIT_FAILURE;
- }
- p = data + 2;
- size = read(fd, p, LOADER_SIZE + 4);
- if (size == -1) {
- perror("Error reading file");
- return EXIT_FAILURE;
- }
- if (size > LOADER_SIZE) {
- fprintf(stderr, "File too large\n");
- return EXIT_FAILURE;
- }
- size = (size + 3) & ~3; /* round up to 4 bytes */
- size += 4; /* add size of version field */
- data[0] = size;
- data[1] = version;
- data[size/4 + 1] = crc32(0, (unsigned char *)(data + 1), size);
- close(fd);
-
- if (write(STDOUT_FILENO, data, size + 4 /*size*/ + 4 /*crc*/) == -1) {
- perror("Error writing file");
- return EXIT_FAILURE;
- }
-
- return EXIT_SUCCESS;
-}
-
-int main(int argc, char * const *argv)
-{
- if (argc == 2) {
- return do_crc(argv[1], 0);
- } else if ((argc == 4) && (strcmp(argv[1], "-v") == 0)) {
- char *endptr, *nptr = argv[2];
- unsigned ver = strtoul(nptr, &endptr, 0);
- if (*nptr != '\0' && *endptr == '\0')
- return do_crc(argv[3], ver);
- }
- fprintf(stderr, "Usage: crcit [-v version] <image>\n");
-
- return EXIT_FAILURE;
-}
diff --git a/board/netstar/eeprom.c b/board/netstar/eeprom.c
deleted file mode 100644
index aa375a4..0000000
--- a/board/netstar/eeprom.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, michl@2n.cz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Some code shamelessly stolen back from Robin Getz.
- */
-
-#include <common.h>
-#include <exports.h>
-#include <timestamp.h>
-#include <net.h>
-#include "../drivers/net/smc91111.h"
-
-static struct eth_device dev = {
- .iobase = CONFIG_SMC91111_BASE
-};
-
-static u16 read_eeprom_reg(u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_RELOAD, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout reading register %02x\n", reg);
- return 0;
- }
-
- return SMC_inw(&dev, GP_REG);
-}
-
-static int write_eeprom_reg(u16 value, u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
-
- SMC_outw(&dev, value, GP_REG);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_STORE, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout writing register %02x\n", reg);
- return 0;
- }
-
- return 1;
-}
-
-static int write_data(u16 *buf, int len)
-{
- u16 reg = 0x23;
-
- while (len--)
- write_eeprom_reg(*buf++, reg++);
-
- return 0;
-}
-
-static int verify_macaddr(char *s)
-{
- u16 reg;
- int i, err = 0;
-
- puts("HWaddr: ");
- for (i = 0; i < 3; i++) {
- reg = read_eeprom_reg(0x20 + i);
- printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
- if (s)
- err |= reg != ((u16 *)s)[i];
- }
-
- return err ? 0 : 1;
-}
-
-static int set_mac(char *s)
-{
- int i;
- char *e, eaddr[6];
-
- /* turn string into mac value */
- for (i = 0; i < 6; i++) {
- eaddr[i] = simple_strtoul(s, &e, 16);
- s = (*e) ? e+1 : e;
- }
-
- for (i = 0; i < 3; i++)
- write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
-
- return 0;
-}
-
-static int parse_element(char *s, unsigned char *buf, int len)
-{
- int cnt;
- char *p, num[3];
- unsigned char id;
-
- id = simple_strtoul(s, &p, 16);
- if (*p++ != ':')
- return -1;
- cnt = 2;
- num[2] = 0;
- for (; *p; p += 2) {
- if (p[1] == 0)
- return -2;
- if (cnt + 3 > len)
- return -3;
- num[0] = p[0];
- num[1] = p[1];
- buf[cnt++] = simple_strtoul(num, NULL, 16);
- }
- buf[0] = id;
- buf[1] = cnt - 2;
-
- return cnt;
-}
-
-int eeprom(int argc, char * const argv[])
-{
- int i, len, ret;
- unsigned char buf[58], *p;
-
- app_startup(argv);
- i = get_version();
- if (i != XF_VERSION) {
- printf("Using ABI version %d, but U-Boot provides %d\n",
- XF_VERSION, i);
- return 1;
- }
-
- if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
- puts("SMSC91111 not found\n");
- return 2;
- }
-
- /* Called without parameters - print MAC address */
- if (argc < 2) {
- verify_macaddr(NULL);
- return 0;
- }
-
- /* Print help message */
- if (argv[1][1] == 'h') {
- puts("NetStar EEPROM writer\n"
- "Built: " U_BOOT_DATE " at " U_BOOT_TIME "\n"
- "Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
- return 0;
- }
-
- /* Try to parse information elements */
- len = sizeof(buf);
- p = buf;
- for (i = 2; i < argc; i++) {
- ret = parse_element(argv[i], p, len);
- switch (ret) {
- case -1:
- printf("Element %d: malformed\n", i - 1);
- return 3;
- case -2:
- printf("Element %d: odd character count\n", i - 1);
- return 3;
- case -3:
- puts("Out of EEPROM memory\n");
- return 3;
- default:
- p += ret;
- len -= ret;
- }
- }
-
- /* First argument (MAC) is mandatory */
- set_mac(argv[1]);
- if (verify_macaddr(argv[1])) {
- puts("*** HWaddr does not match! ***\n");
- return 4;
- }
-
- while (len--)
- *p++ = 0;
-
- write_data((u16 *)buf, sizeof(buf) >> 1);
-
- return 0;
-}
diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c
deleted file mode 100644
index df1704b..0000000
--- a/board/netstar/netstar.c
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <i2c.h>
-#include <flash.h>
-#include <nand.h>
-
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- /* arch number of NetStar board */
- gd->bd->bi_arch_number = MACH_TYPE_NETSTAR;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
- return 0;
-}
-
-int dram_init(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- /* Take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete. */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
- udelay(10); /* doesn't work before timer_init call */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
- udelay(500);
-
- return 0;
-}
-
-int misc_init_r(void)
-{
-#if defined(CONFIG_RTC_DS1307)
- /* enable trickle charge */
- i2c_reg_write(CONFIG_SYS_I2C_RTC_ADDR, 0x10, 0xaa);
-#endif
- return 0;
-}
-
-int board_late_init(void)
-{
- return 0;
-}
-
-#if defined(CONFIG_CMD_FLASH)
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t * info)
-{
- if (banknum == 0) { /* AM29LV800 boot flash */
- info->portwidth = FLASH_CFI_16BIT;
- info->chipwidth = FLASH_CFI_BY16;
- info->interface = FLASH_CFI_X16;
- return 1;
- }
-
- return 0;
-}
-#endif
-
-#if defined(CONFIG_CMD_NAND)
-/*
- * hardware specific access to control-lines
- *
- * NAND_NCE: bit 0 - don't care
- * NAND_CLE: bit 1 -> bit 1 (0x0002)
- * NAND_ALE: bit 2 -> bit 2 (0x0004)
- */
-static void netstar_nand_hwcontrol(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
- unsigned long mask;
-
- if (cmd == NAND_CMD_NONE)
- return;
-
- mask = (ctrl & NAND_CLE) ? 0x02 : 0;
- if (ctrl & NAND_ALE)
- mask |= 0x04;
- writeb(cmd, (unsigned long)chip->IO_ADDR_W | mask);
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
- nand->options = NAND_SAMSUNG_LP_OPTIONS;
- nand->ecc.mode = NAND_ECC_SOFT;
- nand->cmd_ctrl = netstar_nand_hwcontrol;
- nand->chip_delay = 400;
- return 0;
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/netstar/setup.S b/board/netstar/setup.S
deleted file mode 100644
index 72e1811..0000000
--- a/board/netstar/setup.S
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
- * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */
-
-OMAP5910_LPG1_BASE: .word 0xfffbd000
-OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
-OMAP5910_MPU_TC_BASE: .word 0xfffecc00
-OMAP5910_MPU_CLKM_BASE: .word 0xfffece00
-OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800
-OMAP5910_DPLL1_BASE: .word 0xfffecf00
-OMAP5910_GPIO_BASE: .word 0xfffce000
-OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800
-OMAP5910_MPUI_BASE: .word 0xfffec900
-
-_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL
-_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK
-
-OMAP5910_MPUI_CTRL: .word 0x0000ff1b
-
-VAL_EMIFS_CS0_CONFIG: .word 0x00009090
-VAL_EMIFS_CS1_CONFIG: .word 0x00003031
-VAL_EMIFS_CS2_CONFIG: .word 0x0000a0a1
-VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0
-VAL_EMIFS_DYN_WAIT: .word 0x00000000
-/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
- /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */
-
-#if (PHYS_SDRAM_1_SIZE == SZ_32M)
-VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xf << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-#else
-VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-#endif
-
-VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003
-VAL_EMIFF_MRS: .word 0x00000037
-
-/*
- * GPIO04 - Green LED (Red LED is connected to LED Pulse Generator)
- * GPIO07 - LAN91C111 reset
- */
-GPIO_DIRECTION:
- .word 0x0000ff6f
-/*
- * Disable everything (green LED is connected via invertor)
- */
-GPIO_OUTPUT:
- .word 0x00000010
-
-MUX_CONFIG_BASE:
- .word 0xfffe1000
-
-MUX_CONFIG_VALUES:
- .align 4
- .word 0x00000000 @ FUNC_MUX_CTRL_0
- .word 0x00000000 @ FUNC_MUX_CTRL_1
- .word 0x00000000 @ FUNC_MUX_CTRL_2
- .word 0x00000000 @ FUNC_MUX_CTRL_3
- .word 0x00000000 @ FUNC_MUX_CTRL_4
- .word 0x02080480 @ FUNC_MUX_CTRL_5
- .word 0x0100001c @ FUNC_MUX_CTRL_6
- .word 0x0004800b @ FUNC_MUX_CTRL_7
- .word 0x10001200 @ FUNC_MUX_CTRL_8
- .word 0x01201012 @ FUNC_MUX_CTRL_9
- .word 0x02082248 @ FUNC_MUX_CTRL_A
- .word 0x00000248 @ FUNC_MUX_CTRL_B
- .word 0x12240000 @ FUNC_MUX_CTRL_C
- .word 0x00002000 @ FUNC_MUX_CTRL_D
- .word 0x00000000 @ PULL_DWN_CTRL_0
- .word 0x00000800 @ PULL_DWN_CTRL_1
- .word 0x01801000 @ PULL_DWN_CTRL_2
- .word 0x00000000 @ PULL_DWN_CTRL_3
- .word 0x00000000 @ GATE_INH_CTRL_0
- .word 0x00000000 @ VOLTAGE_CTRL_0
- .word 0x00000000 @ TEST_DBG_CTRL_0
- .word 0x00000006 @ MOD_CONF_CTRL_0
- .word 0x0000eaef @ COMP_MODE_CTRL_0
-
-MUX_CONFIG_OFFSETS:
- .align 1
- .byte 0x00 @ FUNC_MUX_CTRL_0
- .byte 0x04 @ FUNC_MUX_CTRL_1
- .byte 0x08 @ FUNC_MUX_CTRL_2
- .byte 0x10 @ FUNC_MUX_CTRL_3
- .byte 0x14 @ FUNC_MUX_CTRL_4
- .byte 0x18 @ FUNC_MUX_CTRL_5
- .byte 0x1c @ FUNC_MUX_CTRL_6
- .byte 0x20 @ FUNC_MUX_CTRL_7
- .byte 0x24 @ FUNC_MUX_CTRL_8
- .byte 0x28 @ FUNC_MUX_CTRL_9
- .byte 0x2c @ FUNC_MUX_CTRL_A
- .byte 0x30 @ FUNC_MUX_CTRL_B
- .byte 0x34 @ FUNC_MUX_CTRL_C
- .byte 0x38 @ FUNC_MUX_CTRL_D
- .byte 0x40 @ PULL_DWN_CTRL_0
- .byte 0x44 @ PULL_DWN_CTRL_1
- .byte 0x48 @ PULL_DWN_CTRL_2
- .byte 0x4c @ PULL_DWN_CTRL_3
- .byte 0x50 @ GATE_INH_CTRL_0
- .byte 0x60 @ VOLTAGE_CTRL_0
- .byte 0x70 @ TEST_DBG_CTRL_0
- .byte 0x80 @ MOD_CONF_CTRL_0
- .byte 0x0c @ COMP_MODE_CTRL_0
- .byte 0xff
-
-.globl lowlevel_init
-lowlevel_init:
- /* Improve performance a bit... */
- mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
- mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
- mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
- orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
- mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
- mov r1, #0x00
- mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
- nop
- nop
- nop
- nop
-
- /* Setup clocking mode */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- ldrh r1, [r0, #0x18] @ ARM_SYST - get reset status
- bic r1, r1, #(7 << 11) @ clear clock select
- orr r1, r1, #(2 << 11) @ set synchronous scalable
- mov r2, #0
-loop:
- cmp r2, #1 @ this loop will wait for at least 100 cycles
- streqh r1, [r0, #0x18] @ before issuing next request from MPU
- add r2, r2, #1 @ on the 1st run code is loaded into I-cache
- cmp r2, #16 @ and second run will set clocking mode
- bne loop
- nop
-
- /* Setup clock dividers */
- ldr r1, _OMAP5910_ARM_CKCTL
- orr r1, r1, #0x2000 @ enable DSP clock
- strh r1, [r0] @ setup clock divisors
-
- /* Setup DPLL to generate requested freq */
- ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
- orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
- strh r1, [r0] @ write
-
-locking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #0x01
- beq locking @ while LOCK not set
-
- /* Enable clock */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- mov r1, #(1 << 10) @ disable idle mode do not check
- @ nWAKEUP pin, other remain active
- strh r1, [r0, #0x04]
- ldr r1, _OMAP5910_ARM_EN_CLK
- strh r1, [r0, #0x08]
- mov r1, #0x003f @ FLASH.RP not enabled in idle and
- strh r1, [r0, #0x0c] @ max delayed ( 32 x CLKIN )
-
- /* Configure 5910 pins functions to match our board. */
- ldr r0, MUX_CONFIG_BASE
- adr r1, MUX_CONFIG_VALUES
- adr r2, MUX_CONFIG_OFFSETS
-next_mux_cfg:
- ldrb r3, [r2], #1
- ldr r4, [r1], #4
- cmp r3, #0xff
- strne r4, [r0, r3]
- bne next_mux_cfg
-
- /* Configure GPIO pins (also disables Green LED) */
- ldr r0, OMAP5910_GPIO_BASE
- ldr r1, GPIO_OUTPUT
- strh r1, [r0, #0x04]
- ldr r1, GPIO_DIRECTION
- strh r1, [r0, #0x08]
-
- /* EnablePeripherals */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit
- mov r1, #0x0001 @ Peripheral enable
- strh r1, [r0, #0x14]
-
- /* Program LED Pulse Generator */
- ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator
- mov r1, #0x7F @ Set obscure frequency in
- strb r1, [r0, #0x00] @ LCR
- mov r1, #0x01 @ Enable clock (CLK_EN) in
- strb r1, [r0, #0x04] @ PMR
-
- /* TIPB Lock UART1 */
- ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches
- mov r1, #1 @ ARM allocated
- strh r1, [r0,#0x04] @ clear IRQ line and status bits
- strh r1, [r0,#0x00]
- ldrh r1, [r0,#0x04]
-
- /* Disable watchdog */
- ldr r0, OMAP5910_MPU_WD_TIMER_BASE
- mov r1, #0xf5
- strh r1, [r0, #0x8]
- mov r1, #0xa0
- strh r1, [r0, #0x8]
-
- /* Enable MCLK */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE
- mov r1, #0x6
- strh r1, [r0, #0x34]
- strh r1, [r0, #0x34]
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register
-
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- strh r1, [r0] @ write
-
-ulocking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #1
- beq ulocking @ while LOCK not set
-
- /* EMIF init */
- ldr r0, OMAP5910_MPU_TC_BASE
- ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG
- bic r1, r1, #0x0c @ pwr down disabled, flash WP
- orr r1, r1, #0x01
- str r1, [r0, #0x0c]
-
- ldr r1, VAL_EMIFS_CS0_CONFIG
- str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG
- ldr r1, VAL_EMIFS_CS1_CONFIG
- str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG
- ldr r1, VAL_EMIFS_CS2_CONFIG
- str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG
- ldr r1, VAL_EMIFS_CS3_CONFIG
- str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG
- ldr r1, VAL_EMIFS_DYN_WAIT
- str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT
-
- /* Setup SDRAM */
- ldr r1, VAL_EMIFF_SDRAM_CONFIG
- str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG
- ldr r1, VAL_EMIFF_SDRAM_CONFIG2
- str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2
- ldr r1, VAL_EMIFF_MRS
- str r1, [r0, #0x24] @ EMIFF_MRS
- /* SDRAM needs 100us to stabilize */
- mov r0, #0x4000
-sdelay:
- subs r0, r0, #0x1
- bne sdelay
-
- /* back to arch calling code */
- mov pc, lr
-.end
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 8ab9440..160dac8 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -28,6 +28,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/uart.h>
#include "board.h"
@@ -76,33 +77,28 @@ int timer_init(void)
static void clock_init_uart(void)
{
struct clk_rst_ctlr *clkrst = (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE;
+ struct clk_pll *pll = &clkrst->crc_pll[CLOCK_PLL_ID_PERIPH];
u32 reg;
- reg = readl(&clkrst->crc_pllp_base);
- if (!(reg & PLL_BASE_OVRRIDE)) {
+ reg = readl(&pll->pll_base);
+ if (!(reg & PLL_BASE_OVRRIDE_MASK)) {
/* Override pllp setup for 216MHz operation. */
- reg = (PLL_BYPASS | PLL_BASE_OVRRIDE | PLL_DIVP);
- reg |= (((NVRM_PLLP_FIXED_FREQ_KHZ/500) << 8) | PLL_DIVM);
- writel(reg, &clkrst->crc_pllp_base);
+ reg = PLL_BYPASS_MASK | PLL_BASE_OVRRIDE_MASK |
+ (1 << PLL_DIVP_SHIFT) | (0xc << PLL_DIVM_SHIFT);
+ reg |= (NVRM_PLLP_FIXED_FREQ_KHZ / 500) << PLL_DIVN_SHIFT;
+ writel(reg, &pll->pll_base);
- reg |= PLL_ENABLE;
- writel(reg, &clkrst->crc_pllp_base);
+ reg |= PLL_ENABLE_MASK;
+ writel(reg, &pll->pll_base);
- reg &= ~PLL_BYPASS;
- writel(reg, &clkrst->crc_pllp_base);
+ reg &= ~PLL_BYPASS_MASK;
+ writel(reg, &pll->pll_base);
}
- /* Now do the UART reset/clock enable */
#if defined(CONFIG_TEGRA2_ENABLE_UARTA)
- /* Assert Reset to UART */
- reg = readl(&clkrst->crc_rst_dev_l);
- reg |= SWR_UARTA_RST; /* SWR_UARTA_RST = 1 */
- writel(reg, &clkrst->crc_rst_dev_l);
-
- /* Enable clk to UART */
- reg = readl(&clkrst->crc_clk_out_enb_l);
- reg |= CLK_ENB_UARTA; /* CLK_ENB_UARTA = 1 */
- writel(reg, &clkrst->crc_clk_out_enb_l);
+ /* Assert UART reset and enable clock */
+ reset_set_enable(PERIPH_ID_UART1, 1);
+ clock_enable(PERIPH_ID_UART1);
/* Enable pllp_out0 to UART */
reg = readl(&clkrst->crc_clk_src_uarta);
@@ -113,20 +109,12 @@ static void clock_init_uart(void)
udelay(2);
/* De-assert reset to UART */
- reg = readl(&clkrst->crc_rst_dev_l);
- reg &= ~SWR_UARTA_RST; /* SWR_UARTA_RST = 0 */
- writel(reg, &clkrst->crc_rst_dev_l);
+ reset_set_enable(PERIPH_ID_UART1, 0);
#endif /* CONFIG_TEGRA2_ENABLE_UARTA */
#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
- /* Assert Reset to UART */
- reg = readl(&clkrst->crc_rst_dev_u);
- reg |= SWR_UARTD_RST; /* SWR_UARTD_RST = 1 */
- writel(reg, &clkrst->crc_rst_dev_u);
-
- /* Enable clk to UART */
- reg = readl(&clkrst->crc_clk_out_enb_u);
- reg |= CLK_ENB_UARTD; /* CLK_ENB_UARTD = 1 */
- writel(reg, &clkrst->crc_clk_out_enb_u);
+ /* Assert UART reset and enable clock */
+ reset_set_enable(PERIPH_ID_UART4, 1);
+ clock_enable(PERIPH_ID_UART4);
/* Enable pllp_out0 to UART */
reg = readl(&clkrst->crc_clk_src_uartd);
@@ -137,9 +125,7 @@ static void clock_init_uart(void)
udelay(2);
/* De-assert reset to UART */
- reg = readl(&clkrst->crc_rst_dev_u);
- reg &= ~SWR_UARTD_RST; /* SWR_UARTD_RST = 0 */
- writel(reg, &clkrst->crc_rst_dev_u);
+ reset_set_enable(PERIPH_ID_UART4, 0);
#endif /* CONFIG_TEGRA2_ENABLE_UARTD */
}
@@ -157,19 +143,15 @@ static void pin_mux_uart(void)
reg &= 0xFFF0FFFF; /* IRRX_/IRTX_SEL [19:16] = 00 UARTA */
writel(reg, &pmt->pmt_ctl_c);
- reg = readl(&pmt->pmt_tri_a);
- reg &= ~Z_IRRX; /* Z_IRRX = normal (0) */
- reg &= ~Z_IRTX; /* Z_IRTX = normal (0) */
- writel(reg, &pmt->pmt_tri_a);
+ pinmux_tristate_disable(PIN_IRRX);
+ pinmux_tristate_disable(PIN_IRTX);
#endif /* CONFIG_TEGRA2_ENABLE_UARTA */
#if defined(CONFIG_TEGRA2_ENABLE_UARTD)
reg = readl(&pmt->pmt_ctl_b);
reg &= 0xFFFFFFF3; /* GMC_SEL [3:2] = 00, UARTD */
writel(reg, &pmt->pmt_ctl_b);
- reg = readl(&pmt->pmt_tri_a);
- reg &= ~Z_GMC; /* Z_GMC = normal (0) */
- writel(reg, &pmt->pmt_tri_a);
+ pinmux_tristate_disable(PIN_GMC);
#endif /* CONFIG_TEGRA2_ENABLE_UARTD */
}
@@ -183,16 +165,8 @@ static void clock_init_mmc(void)
u32 reg;
/* Do the SDMMC resets/clock enables */
-
- /* Assert Reset to SDMMC4 */
- reg = readl(&clkrst->crc_rst_dev_l);
- reg |= SWR_SDMMC4_RST; /* SWR_SDMMC4_RST = 1 */
- writel(reg, &clkrst->crc_rst_dev_l);
-
- /* Enable clk to SDMMC4 */
- reg = readl(&clkrst->crc_clk_out_enb_l);
- reg |= CLK_ENB_SDMMC4; /* CLK_ENB_SDMMC4 = 1 */
- writel(reg, &clkrst->crc_clk_out_enb_l);
+ reset_set_enable(PERIPH_ID_SDMMC4, 1);
+ clock_enable(PERIPH_ID_SDMMC4);
/* Enable pllp_out0 to SDMMC4 */
reg = readl(&clkrst->crc_clk_src_sdmmc4);
@@ -206,20 +180,10 @@ static void clock_init_mmc(void)
*/
udelay(2);
- /* De-assert reset to SDMMC4 */
- reg = readl(&clkrst->crc_rst_dev_l);
- reg &= ~SWR_SDMMC4_RST; /* SWR_SDMMC4_RST = 0 */
- writel(reg, &clkrst->crc_rst_dev_l);
-
- /* Assert Reset to SDMMC3 */
- reg = readl(&clkrst->crc_rst_dev_u);
- reg |= SWR_SDMMC3_RST; /* SWR_SDMMC3_RST = 1 */
- writel(reg, &clkrst->crc_rst_dev_u);
+ reset_set_enable(PERIPH_ID_SDMMC4, 1);
- /* Enable clk to SDMMC3 */
- reg = readl(&clkrst->crc_clk_out_enb_u);
- reg |= CLK_ENB_SDMMC3; /* CLK_ENB_SDMMC3 = 1 */
- writel(reg, &clkrst->crc_clk_out_enb_u);
+ reset_set_enable(PERIPH_ID_SDMMC3, 1);
+ clock_enable(PERIPH_ID_SDMMC3);
/* Enable pllp_out0 to SDMMC4, set divisor to 11 for 20MHz */
reg = readl(&clkrst->crc_clk_src_sdmmc3);
@@ -230,10 +194,7 @@ static void clock_init_mmc(void)
/* wait for 2us */
udelay(2);
- /* De-assert reset to SDMMC3 */
- reg = readl(&clkrst->crc_rst_dev_u);
- reg &= ~SWR_SDMMC3_RST; /* SWR_SDMMC3_RST = 0 */
- writel(reg, &clkrst->crc_rst_dev_u);
+ reset_set_enable(PERIPH_ID_SDMMC3, 0);
}
/*
@@ -257,13 +218,9 @@ static void pin_mux_mmc(void)
reg |= (3 << 0); /* GME_SEL [1:0] = 11 SDIO4 */
writel(reg, &pmt->pmt_ctl_d);
- reg = readl(&pmt->pmt_tri_a);
- reg &= ~Z_ATB; /* Z_ATB = normal (0) */
- reg &= ~Z_GMA; /* Z_GMA = normal (0) */
- writel(reg, &pmt->pmt_tri_a);
- reg = readl(&pmt->pmt_tri_b);
- reg &= ~Z_GME; /* Z_GME = normal (0) */
- writel(reg, &pmt->pmt_tri_b);
+ pinmux_tristate_disable(PIN_ATB);
+ pinmux_tristate_disable(PIN_GMA);
+ pinmux_tristate_disable(PIN_GME);
/* SDMMC3 */
/* SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */
@@ -274,13 +231,9 @@ static void pin_mux_mmc(void)
reg |= (2 << 14); /* SDD_SEL [15:14] = 01 SDIO3 */
writel(reg, &pmt->pmt_ctl_d);
- reg = readl(&pmt->pmt_tri_b);
- reg &= ~Z_SDC; /* Z_SDC = normal (0) */
- reg &= ~Z_SDD; /* Z_SDD = normal (0) */
- writel(reg, &pmt->pmt_tri_b);
- reg = readl(&pmt->pmt_tri_d);
- reg &= ~Z_SDB; /* Z_SDB = normal (0) */
- writel(reg, &pmt->pmt_tri_d);
+ pinmux_tristate_disable(PIN_SDC);
+ pinmux_tristate_disable(PIN_SDD);
+ pinmux_tristate_disable(PIN_SDB);
}
/*
@@ -318,8 +271,6 @@ int board_init(void)
{
/* boot param addr */
gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
- /* board id for Linux */
- gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
return 0;
}
diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c
index 992e9f7..58a676d 100644
--- a/board/pandora/pandora.c
+++ b/board/pandora/pandora.c
@@ -32,7 +32,9 @@
#include <common.h>
#include <twl4030.h>
#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/mach-types.h>
#include "pandora.h"
@@ -102,3 +104,11 @@ void set_muxconf_regs(void)
{
MUX_PANDORA();
}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
diff --git a/board/ronetix/pm9261/led.c b/board/ronetix/pm9261/led.c
index ff21ce6..f659870 100644
--- a/board/ronetix/pm9261/led.c
+++ b/board/ronetix/pm9261/led.c
@@ -24,17 +24,16 @@
*/
#include <common.h>
-#include <asm/arch/at91sam9261.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/io.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
void coloured_LED_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Enable clock */
- writel(1 << AT91SAM9261_ID_PIOC, &pmc->pcer);
+ writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
at91_set_pio_output(CONFIG_RED_LED, 1);
at91_set_pio_output(CONFIG_GREEN_LED, 1);
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index 2c50fe8..871b94a 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -26,17 +26,15 @@
#include <common.h>
#include <asm/sizes.h>
-#include <asm/arch/at91sam9261.h>
+#include <asm/io.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
+
#include <lcd.h>
#include <atmel_lcdc.h>
#include <dataflash.h>
@@ -56,9 +54,9 @@ DECLARE_GLOBAL_DATA_PTR;
static void pm9261_nand_hw_init(void)
{
unsigned long csa;
- at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE;
- at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Enable CS3 */
csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A;
@@ -86,8 +84,8 @@ static void pm9261_nand_hw_init(void)
AT91_SMC_MODE_TDF_CYCLE(2),
&smc->cs[3].mode);
- writel(1 << AT91SAM9261_ID_PIOA |
- 1 << AT91SAM9261_ID_PIOC,
+ writel(1 << ATMEL_ID_PIOA |
+ 1 << ATMEL_ID_PIOC,
&pmc->pcer);
/* Configure RDY/BSY */
@@ -105,8 +103,8 @@ static void pm9261_nand_hw_init(void)
#ifdef CONFIG_DRIVER_DM9000
static void pm9261_dm9000_hw_init(void)
{
- at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE;
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Configure SMC CS2 for DM9000 */
writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
@@ -127,7 +125,7 @@ static void pm9261_dm9000_hw_init(void)
&smc->cs[2].mode);
/* Configure Interrupt pin as input, no pull-up */
- writel(1 << AT91SAM9261_ID_PIOA, &pmc->pcer);
+ writel(1 << ATMEL_ID_PIOA, &pmc->pcer);
at91_set_pio_input(AT91_PIO_PORTA, 24, 0);
}
#endif
@@ -147,7 +145,7 @@ vidinfo_t panel_info = {
vl_vsync_len: 1,
vl_upper_margin:1,
vl_lower_margin:0,
- mmio: AT91SAM9261_LCDC_BASE,
+ mmio: ATMEL_BASE_LCDC,
};
void lcd_enable(void)
@@ -162,7 +160,7 @@ void lcd_disable(void)
static void pm9261_lcd_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* LCDHSYNC */
at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* LCDDOTCK */
@@ -189,7 +187,7 @@ static void pm9261_lcd_hw_init(void)
writel(1 << 17, &pmc->scer); /* LCD controller Clock, AT91SAM9261 only */
- gd->fb_base = AT91SAM9261_SRAM_BASE;
+ gd->fb_base = ATMEL_BASE_SRAM;
}
#ifdef CONFIG_LCD_INFO
@@ -241,13 +239,13 @@ void lcd_show_board_info(void)
int board_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Enable Ctrlc */
console_init_f();
- writel(1 << AT91SAM9261_ID_PIOA |
- 1 << AT91SAM9261_ID_PIOC,
+ writel(1 << ATMEL_ID_PIOA |
+ 1 << ATMEL_ID_PIOC,
&pmc->pcer);
/* arch number of PM9261-Board */
@@ -256,7 +254,7 @@ int board_init(void)
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- at91_serial_hw_init();
+ at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
pm9261_nand_hw_init();
#endif
diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c
index 4e585a4..d6eb69f 100644
--- a/board/ronetix/pm9263/led.c
+++ b/board/ronetix/pm9263/led.c
@@ -24,17 +24,16 @@
*/
#include <common.h>
-#include <asm/arch/at91sam9263.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_pio.h>
-#include <asm/arch/io.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
void coloured_LED_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Enable clock */
- writel(1 << AT91SAM9263_ID_PIOB, &pmc->pcer);
+ writel(1 << ATMEL_ID_PIOB, &pmc->pcer);
at91_set_pio_output(CONFIG_RED_LED, 1);
at91_set_pio_output(CONFIG_GREEN_LED, 1);
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 8071600..cfc9847 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -26,16 +26,14 @@
#include <common.h>
#include <asm/sizes.h>
-#include <asm/arch/at91sam9263.h>
+#include <asm/io.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
+#include <asm/arch/gpio.h>
#include <lcd.h>
#include <atmel_lcdc.h>
#include <dataflash.h>
@@ -55,8 +53,8 @@ DECLARE_GLOBAL_DATA_PTR;
static void pm9263_nand_hw_init(void)
{
unsigned long csa;
- at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE;
- at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC0;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
/* Enable CS3 */
csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
@@ -95,7 +93,7 @@ static void pm9263_nand_hw_init(void)
#ifdef CONFIG_MACB
static void pm9263_macb_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/*
* PB27 enables the 50MHz oscillator for Ethernet PHY
@@ -106,7 +104,7 @@ static void pm9263_macb_hw_init(void)
at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */
/* Enable clock */
- writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer);
+ writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
/*
* Disable pull-up on:
@@ -145,7 +143,7 @@ vidinfo_t panel_info = {
vl_vsync_len: 1,
vl_upper_margin:1,
vl_lower_margin:0,
- mmio: AT91SAM9263_LCDC_BASE,
+ mmio: ATMEL_BASE_LCDC,
};
void lcd_enable(void)
@@ -168,8 +166,8 @@ static int pm9263_lcd_hw_psram_init(void)
{
volatile uint16_t x;
unsigned long csa;
- at91_smc_t *smc = (at91_smc_t *) AT91_SMC1_BASE;
- at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC1;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
/* Enable CS3 3.3v, no pull-ups */
csa = readl(&matrix->csa[1]) | AT91_MATRIX_CSA_DBPUC |
@@ -249,7 +247,7 @@ static int pm9263_lcd_hw_psram_init(void)
static void pm9263_lcd_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */
at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */
@@ -275,7 +273,7 @@ static void pm9263_lcd_hw_init(void)
at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */
at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */
- writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer);
+ writel(1 << ATMEL_ID_LCDC, &pmc->pcer);
/* Power Control */
at91_set_pio_output(AT91_PIO_PORTA, 22, 1);
@@ -285,9 +283,9 @@ static void pm9263_lcd_hw_init(void)
/* initialize te PSRAM */
int stat = pm9263_lcd_hw_psram_init();
- gd->fb_base = (stat == 0) ? PHYS_PSRAM : AT91SAM9263_SRAM0_BASE;
+ gd->fb_base = (stat == 0) ? PHYS_PSRAM : ATMEL_BASE_SRAM0;
#else
- gd->fb_base = AT91SAM9263_SRAM0_BASE;
+ gd->fb_base = ATMEL_BASE_SRAM0;
#endif
}
@@ -341,14 +339,14 @@ void lcd_show_board_info(void)
int board_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Enable Ctrlc */
console_init_f();
- writel((1 << AT91SAM9263_ID_PIOA) |
- (1 << AT91SAM9263_ID_PIOCDE) |
- (1 << AT91SAM9263_ID_PIOB),
+ writel((1 << ATMEL_ID_PIOA) |
+ (1 << ATMEL_ID_PIOCDE) |
+ (1 << ATMEL_ID_PIOB),
&pmc->pcer);
/* arch number of AT91SAM9263EK-Board */
@@ -357,7 +355,7 @@ int board_init(void)
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- at91_serial_hw_init();
+ at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
pm9263_nand_hw_init();
#endif
@@ -400,7 +398,7 @@ int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01);
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x01);
#endif
return rc;
}
@@ -417,7 +415,7 @@ int checkboard (void)
ss = "(PSRAM)";
break;
- case AT91SAM9263_SRAM0_BASE:
+ case ATMEL_BASE_SRAM0:
ss = "(Internal SRAM)";
break;
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index fa69599..f3374a4 100644
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -29,16 +29,14 @@
#include <common.h>
#include <asm/sizes.h>
-#include <asm/arch/at91sam9g45.h>
+#include <asm/io.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_matrix.h>
-#include <asm/arch/at91_pio.h>
+#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
-#include <asm/arch/io.h>
-#include <asm/arch/hardware.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
#include <net.h>
#endif
@@ -54,9 +52,9 @@ DECLARE_GLOBAL_DATA_PTR;
static void pm9g45_nand_hw_init(void)
{
unsigned long csa;
- at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE;
- at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC;
+ struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Enable CS3 */
csa = readl(&matrix->ccr[6]) | AT91_MATRIX_CSA_EBI_CS3A;
@@ -80,7 +78,7 @@ static void pm9g45_nand_hw_init(void)
AT91_SMC_MODE_TDF_CYCLE(3),
&smc->cs[3].mode);
- writel(1 << AT91SAM9G45_ID_PIOC, &pmc->pcer);
+ writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
#ifdef CONFIG_SYS_NAND_READY_PIN
/* Configure RDY/BSY */
@@ -95,7 +93,7 @@ static void pm9g45_nand_hw_init(void)
#ifdef CONFIG_MACB
static void pm9g45_macb_hw_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/*
* PD2 enables the 50MHz oscillator for Ethernet PHY
@@ -106,7 +104,7 @@ static void pm9g45_macb_hw_init(void)
at91_set_pio_value(AT91_PIO_PORTD, 2, 1); /* 1- enable, 0 - disable */
/* Enable clock */
- writel(1 << AT91SAM9G45_ID_EMAC, &pmc->pcer);
+ writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
/*
* Disable pull-up on:
@@ -131,22 +129,22 @@ static void pm9g45_macb_hw_init(void)
int board_init(void)
{
- at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
/* Enable Ctrlc */
console_init_f();
- writel((1 << AT91SAM9G45_ID_PIOA) |
- (1 << AT91SAM9G45_ID_PIOB) |
- (1 << AT91SAM9G45_ID_PIOC) |
- (1 << AT91SAM9G45_ID_PIODE), &pmc->pcer);
+ writel((1 << ATMEL_ID_PIOA) |
+ (1 << ATMEL_ID_PIOB) |
+ (1 << ATMEL_ID_PIOC) |
+ (1 << ATMEL_ID_PIODE), &pmc->pcer);
/* arch number of AT91SAM9M10G45EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
- at91_serial_hw_init();
+ at91_seriald_hw_init();
#ifdef CONFIG_CMD_NAND
pm9g45_nand_hw_init();
#endif
@@ -188,7 +186,7 @@ int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01);
+ rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC, 0x01);
#endif
return rc;
}
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index 581935d..e24cd29 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -73,7 +73,7 @@ int board_mmc_init(bd_t *bis)
int i;
/* MASSMEMORY_EN: XMSMDATA7: GPJ2[7] output high */
- gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
+ s5p_gpio_direction_output(&s5pc110_gpio->j2, 7, 1);
/*
* MMC0 GPIO
@@ -86,11 +86,11 @@ int board_mmc_init(bd_t *bis)
if (i == 2)
continue;
/* GPG0[0:6] special function 2 */
- gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
+ s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
/* GPG0[0:6] pull disable */
- gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
+ s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
/* GPG0[0:6] drv 4x */
- gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
+ s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
}
return s5p_mmc_init(0, 4);
diff --git a/board/armadillo/Makefile b/board/samsung/origen/Makefile
index 3b52452..f5c6507 100644
--- a/board/armadillo/Makefile
+++ b/board/samsung/origen/Makefile
@@ -1,10 +1,5 @@
#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2002
-# Sysgo Real-Time Solutions, GmbH <www.elinos.com>
-# Marius Groeger <mgroeger@sysgo.de>
+# Copyright (C) 2011 Samsung Electronics
#
# See file CREDITS for list of people who contributed to this
# project.
@@ -29,21 +24,35 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := armadillo.o flash.o
-SOBJS := lowlevel_init.o
+SOBJS := mem_setup.o
+SOBJS += lowlevel_init.o
+
+ifndef CONFIG_SPL_BUILD
+COBJS += origen.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+COBJS += mmc_boot.o
+endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+ALL +=$(obj).depend $(LIB)
+
+ifdef CONFIG_SPL_BUILD
+ALL += tools/mk$(BOARD)spl.exe
+endif
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+all: $(ALL)
-clean:
- rm -f $(SOBJS) $(OBJS)
+$(LIB): $(OBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS)
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
+ifdef CONFIG_SPL_BUILD
+tools/mk$(BOARD)spl.exe: tools/mkv310_image.c
+ $(HOSTCC) tools/mkv310_image.c -o tools/mk$(BOARD)spl.exe
+endif
#########################################################################
diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S
new file mode 100644
index 0000000..ddca1e2
--- /dev/null
+++ b/board/samsung/origen/lowlevel_init.S
@@ -0,0 +1,357 @@
+/*
+ * Lowlevel setup for ORIGEN board based on S5PV310
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+#include "origen_setup.h"
+/*
+ * Register usages:
+ *
+ * r5 has zero always
+ * r7 has GPIO part1 base 0x11400000
+ * r6 has GPIO part2 base 0x11000000
+ */
+
+_TEXT_BASE:
+ .word CONFIG_SYS_TEXT_BASE
+
+ .globl lowlevel_init
+lowlevel_init:
+ push {lr}
+
+ /* r5 has always zero */
+ mov r5, #0
+ ldr r7, =S5PC210_GPIO_PART1_BASE
+ ldr r6, =S5PC210_GPIO_PART2_BASE
+
+ /* check reset status */
+ ldr r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET)
+ ldr r1, [r0]
+
+ /* AFTR wakeup reset */
+ ldr r2, =S5P_CHECK_DIDLE
+ cmp r1, r2
+ beq exit_wakeup
+
+ /* LPA wakeup reset */
+ ldr r2, =S5P_CHECK_LPA
+ cmp r1, r2
+ beq exit_wakeup
+
+ /* Sleep wakeup reset */
+ ldr r2, =S5P_CHECK_SLEEP
+ cmp r1, r2
+ beq wakeup_reset
+
+ /*
+ * If U-boot is already running in ram, no need to relocate U-Boot.
+ * Memory controller must be configured before relocating U-Boot
+ * in ram.
+ */
+ ldr r0, =0x0ffffff /* r0 <- Mask Bits*/
+ bic r1, pc, r0 /* pc <- current addr of code */
+ /* r1 <- unmasked bits of pc */
+ ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
+ bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
+ cmp r1, r2 /* compare r1, r2 */
+ beq 1f /* r0 == r1 then skip sdram init */
+
+ /* init system clock */
+ bl system_clock_init
+
+ /* Memory initialize */
+ bl mem_ctrl_asm_init
+
+1:
+ /* for UART */
+ bl uart_asm_init
+ bl tzpc_init
+ pop {pc}
+
+wakeup_reset:
+ bl system_clock_init
+ bl mem_ctrl_asm_init
+ bl tzpc_init
+
+exit_wakeup:
+ /* Load return address and jump to kernel */
+ ldr r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET)
+
+ /* r1 = physical address of s5pc210_cpu_resume function */
+ ldr r1, [r0]
+
+ /* Jump to kernel*/
+ mov pc, r1
+ nop
+ nop
+
+/*
+ * system_clock_init: Initialize core clock and bus clock.
+ * void system_clock_init(void)
+ */
+system_clock_init:
+ push {lr}
+ ldr r0, =S5PC210_CLOCK_BASE
+
+ /* APLL(1), MPLL(1), CORE(0), HPM(0) */
+ ldr r1, =CLK_SRC_CPU_VAL
+ ldr r2, =CLK_SRC_CPU_OFFSET
+ str r1, [r0, r2]
+
+ /* wait ?us */
+ mov r1, #0x10000
+2: subs r1, r1, #1
+ bne 2b
+
+ ldr r1, =CLK_SRC_TOP0_VAL
+ ldr r2, =CLK_SRC_TOP0_OFFSET
+ str r1, [r0, r2]
+
+ ldr r1, =CLK_SRC_TOP1_VAL
+ ldr r2, =CLK_SRC_TOP1_OFFSET
+ str r1, [r0, r2]
+
+ /* DMC */
+ ldr r1, =CLK_SRC_DMC_VAL
+ ldr r2, =CLK_SRC_DMC_OFFSET
+ str r1, [r0, r2]
+
+ /*CLK_SRC_LEFTBUS */
+ ldr r1, =CLK_SRC_LEFTBUS_VAL
+ ldr r2, =CLK_SRC_LEFTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /*CLK_SRC_RIGHTBUS */
+ ldr r1, =CLK_SRC_RIGHTBUS_VAL
+ ldr r2, =CLK_SRC_RIGHTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
+ ldr r1, =CLK_SRC_FSYS_VAL
+ ldr r2, =CLK_SRC_FSYS_OFFSET
+ str r1, [r0, r2]
+
+ /* UART[0:4] */
+ ldr r1, =CLK_SRC_PERIL0_VAL
+ ldr r2, =CLK_SRC_PERIL0_OFFSET
+ str r1, [r0, r2]
+
+ /* wait ?us */
+ mov r1, #0x10000
+3: subs r1, r1, #1
+ bne 3b
+
+ /* CLK_DIV_CPU0 */
+ ldr r1, =CLK_DIV_CPU0_VAL
+ ldr r2, =CLK_DIV_CPU0_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_CPU1 */
+ ldr r1, =CLK_DIV_CPU1_VAL
+ ldr r2, =CLK_DIV_CPU1_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_DMC0 */
+ ldr r1, =CLK_DIV_DMC0_VAL
+ ldr r2, =CLK_DIV_DMC0_OFFSET
+ str r1, [r0, r2]
+
+ /*CLK_DIV_DMC1 */
+ ldr r1, =CLK_DIV_DMC1_VAL
+ ldr r2, =CLK_DIV_DMC1_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_LEFTBUS */
+ ldr r1, =CLK_DIV_LEFTBUS_VAL
+ ldr r2, =CLK_DIV_LEFTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_RIGHTBUS */
+ ldr r1, =CLK_DIV_RIGHTBUS_VAL
+ ldr r2, =CLK_DIV_RIGHTBUS_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_TOP */
+ ldr r1, =CLK_DIV_TOP_VAL
+ ldr r2, =CLK_DIV_TOP_OFFSET
+ str r1, [r0, r2]
+
+ /* MMC[0:1] */
+ ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */
+ ldr r2, =CLK_DIV_FSYS1_OFFSET
+ str r1, [r0, r2]
+
+ /* MMC[2:3] */
+ ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */
+ ldr r2, =CLK_DIV_FSYS2_OFFSET
+ str r1, [r0, r2]
+
+ /* MMC4 */
+ ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */
+ ldr r2, =CLK_DIV_FSYS3_OFFSET
+ str r1, [r0, r2]
+
+ /* CLK_DIV_PERIL0: UART Clock Divisors */
+ ldr r1, =CLK_DIV_PERIL0_VAL
+ ldr r2, =CLK_DIV_PERIL0_OFFSET
+ str r1, [r0, r2]
+
+ /* Set PLL locktime */
+ ldr r1, =PLL_LOCKTIME
+ ldr r2, =APLL_LOCK_OFFSET
+ str r1, [r0, r2]
+
+ ldr r1, =PLL_LOCKTIME
+ ldr r2, =MPLL_LOCK_OFFSET
+ str r1, [r0, r2]
+
+ ldr r1, =PLL_LOCKTIME
+ ldr r2, =EPLL_LOCK_OFFSET
+ str r1, [r0, r2]
+
+ ldr r1, =PLL_LOCKTIME
+ ldr r2, =VPLL_LOCK_OFFSET
+ str r1, [r0, r2]
+
+ /* APLL_CON1 */
+ ldr r1, =APLL_CON1_VAL
+ ldr r2, =APLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /* APLL_CON0 */
+ ldr r1, =APLL_CON0_VAL
+ ldr r2, =APLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /* MPLL_CON1 */
+ ldr r1, =MPLL_CON1_VAL
+ ldr r2, =MPLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /* MPLL_CON0 */
+ ldr r1, =MPLL_CON0_VAL
+ ldr r2, =MPLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /* EPLL */
+ ldr r1, =EPLL_CON1_VAL
+ ldr r2, =EPLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /* EPLL_CON0 */
+ ldr r1, =EPLL_CON0_VAL
+ ldr r2, =EPLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /* VPLL_CON1 */
+ ldr r1, =VPLL_CON1_VAL
+ ldr r2, =VPLL_CON1_OFFSET
+ str r1, [r0, r2]
+
+ /* VPLL_CON0 */
+ ldr r1, =VPLL_CON0_VAL
+ ldr r2, =VPLL_CON0_OFFSET
+ str r1, [r0, r2]
+
+ /* wait ?us */
+ mov r1, #0x30000
+4: subs r1, r1, #1
+ bne 4b
+
+ pop {pc}
+/*
+ * uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
+ * void uart_asm_init(void)
+ */
+ .globl uart_asm_init
+uart_asm_init:
+
+ /* setup UART0-UART3 GPIOs (part1) */
+ mov r0, r7
+ ldr r1, =S5PC210_GPIO_A0_CON_VAL
+ str r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET]
+ ldr r1, =S5PC210_GPIO_A1_CON_VAL
+ str r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET]
+
+ ldr r0, =S5PC210_UART_BASE
+ add r0, r0, #S5PC210_DEFAULT_UART_OFFSET
+
+ ldr r1, =ULCON_VAL
+ str r1, [r0, #ULCON_OFFSET]
+ ldr r1, =UCON_VAL
+ str r1, [r0, #UCON_OFFSET]
+ ldr r1, =UFCON_VAL
+ str r1, [r0, #UFCON_OFFSET]
+ ldr r1, =UBRDIV_VAL
+ str r1, [r0, #UBRDIV_OFFSET]
+ ldr r1, =UFRACVAL_VAL
+ str r1, [r0, #UFRACVAL_OFFSET]
+ mov pc, lr
+ nop
+ nop
+ nop
+
+/* Setting TZPC[TrustZone Protection Controller] */
+tzpc_init:
+ ldr r0, =TZPC0_BASE
+ mov r1, #R0SIZE
+ str r1, [r0]
+ mov r1, #DECPROTXSET
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC1_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC2_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC3_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC4_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ ldr r0, =TZPC5_BASE
+ str r1, [r0, #TZPC_DECPROT0SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT1SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT2SET_OFFSET]
+ str r1, [r0, #TZPC_DECPROT3SET_OFFSET]
+
+ mov pc, lr
diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S
new file mode 100644
index 0000000..a798848
--- /dev/null
+++ b/board/samsung/origen/mem_setup.S
@@ -0,0 +1,421 @@
+/*
+ * Memory setup for ORIGEN board based on S5PV310
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include "origen_setup.h"
+#define SET_MIU
+
+ .globl mem_ctrl_asm_init
+mem_ctrl_asm_init:
+ /*
+ * Async bridge configuration at CPU_core:
+ * 1: half_sync
+ * 0: full_sync
+ */
+ ldr r0, =ASYNC_CONFIG
+ mov r1, #1
+ str r1, [r0]
+
+#ifdef SET_MIU
+ ldr r0, =S5PC210_MIU_BASE
+ /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */
+ ldr r1, =0x20001507
+ str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET]
+
+ /* Update MIU Configuration */
+ ldr r1, =0x00000001
+ str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET]
+#endif
+ /* DREX0 */
+ ldr r0, =S5PC210_DMC0_BASE
+
+ /*
+ * DLL Parameter Setting:
+ * Termination: Enable R/W
+ * Phase Delay for DQS Cleaning: 180' Shift
+ */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /*
+ * ZQ Calibration
+ * Termination: Disable
+ * Auto Calibration Start: Enable
+ */
+ ldr r1, =0xE3855703
+ str r1, [r0, #DMC_PHYZQCONTROL]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+1: subs r2, r2, #1
+ bne 1b
+
+ /*
+ * Update DLL Information:
+ * Force DLL Resyncronization
+ */
+ ldr r1, =0xe000008e
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Reset Force DLL Resyncronization */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Enable Differential DQS, DLL Off*/
+ ldr r1, =0x71101008
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ /* Activate PHY DLL: DLL On */
+ ldr r1, =0x7110100A
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ /* Set DLL Parameters */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* DLL Start */
+ ldr r1, =0x7110100B
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ ldr r1, =0x00000000
+ str r1, [r0, #DMC_PHYCONTROL2]
+
+ /* Set Clock Ratio of Bus clock to Memory Clock */
+ ldr r1, =0x0FFF301a
+ str r1, [r0, #DMC_CONCONTROL]
+
+ /*
+ * Memor Burst length: 8
+ * Number of chips: 2
+ * Memory Bus width: 32 bit
+ * Memory Type: DDR3
+ * Additional Latancy for PLL: 1 Cycle
+ */
+ ldr r1, =0x00312640
+ str r1, [r0, #DMC_MEMCONTROL]
+
+ /*
+ * Memory Configuration Chip 0
+ * Address Mapping: Interleaved
+ * Number of Column address Bits: 10 bits
+ * Number of Rows Address Bits: 14
+ * Number of Banks: 8
+ */
+ ldr r1, =0x20e01323
+ str r1, [r0, #DMC_MEMCONFIG0]
+
+ /*
+ * Memory Configuration Chip 1
+ * Address Mapping: Interleaved
+ * Number of Column address Bits: 10 bits
+ * Number of Rows Address Bits: 14
+ * Number of Banks: 8
+ */
+ ldr r1, =0x40e01323
+ str r1, [r0, #DMC_MEMCONFIG1]
+
+ /* Config Precharge Policy */
+ ldr r1, =0xff000000
+ str r1, [r0, #DMC_PRECHCONFIG]
+
+ /*
+ * TimingAref, TimingRow, TimingData, TimingPower Setting:
+ * Values as per Memory AC Parameters
+ */
+ ldr r1, =0x000000BB
+ str r1, [r0, #DMC_TIMINGAREF]
+ ldr r1, =0x4046654f
+ str r1, [r0, #DMC_TIMINGROW]
+ ldr r1, =0x46400506
+ str r1, [r0, #DMC_TIMINGDATA]
+ ldr r1, =0x52000A3C
+ str r1, [r0, #DMC_TIMINGPOWER]
+
+ /* Chip0: NOP Command: Assert and Hold CKE to high level */
+ ldr r1, =0x07000000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+2: subs r2, r2, #1
+ bne 2b
+
+ /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ ldr r1, =0x00020000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00030000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00010002
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00000328
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+3: subs r2, r2, #1
+ bne 3b
+
+ /* Chip0: ZQINIT */
+ ldr r1, =0x0a000000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+4: subs r2, r2, #1
+ bne 4b
+
+ /* Chip1: NOP Command: Assert and Hold CKE to high level */
+ ldr r1, =0x07100000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+5: subs r2, r2, #1
+ bne 5b
+
+ /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ ldr r1, =0x00120000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00130000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00110002
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00100328
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+6: subs r2, r2, #1
+ bne 6b
+
+ /* Chip1: ZQINIT */
+ ldr r1, =0x0a100000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+7: subs r2, r2, #1
+ bne 7b
+
+ ldr r1, =0xe000008e
+ str r1, [r0, #DMC_PHYCONTROL1]
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+8: subs r2, r2, #1
+ bne 8b
+
+ /* DREX1 */
+ ldr r0, =S5PC210_DMC1_BASE @0x10410000
+
+ /*
+ * DLL Parameter Setting:
+ * Termination: Enable R/W
+ * Phase Delay for DQS Cleaning: 180' Shift
+ */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /*
+ * ZQ Calibration:
+ * Termination: Disable
+ * Auto Calibration Start: Enable
+ */
+ ldr r1, =0xE3855703
+ str r1, [r0, #DMC_PHYZQCONTROL]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+1: subs r2, r2, #1
+ bne 1b
+
+ /*
+ * Update DLL Information:
+ * Force DLL Resyncronization
+ */
+ ldr r1, =0xe000008e
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Reset Force DLL Resyncronization */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Enable Differential DQS, DLL Off*/
+ ldr r1, =0x71101008
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ /* Activate PHY DLL: DLL On */
+ ldr r1, =0x7110100A
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ /* Set DLL Parameters */
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* DLL Start */
+ ldr r1, =0x7110100B
+ str r1, [r0, #DMC_PHYCONTROL0]
+
+ ldr r1, =0x00000000
+ str r1, [r0, #DMC_PHYCONTROL2]
+
+ /* Set Clock Ratio of Bus clock to Memory Clock */
+ ldr r1, =0x0FFF301a
+ str r1, [r0, #DMC_CONCONTROL]
+
+ /*
+ * Memor Burst length: 8
+ * Number of chips: 2
+ * Memory Bus width: 32 bit
+ * Memory Type: DDR3
+ * Additional Latancy for PLL: 1 Cycle
+ */
+ ldr r1, =0x00312640
+ str r1, [r0, #DMC_MEMCONTROL]
+
+ /*
+ * Memory Configuration Chip 0
+ * Address Mapping: Interleaved
+ * Number of Column address Bits: 10 bits
+ * Number of Rows Address Bits: 14
+ * Number of Banks: 8
+ */
+ ldr r1, =0x20e01323
+ str r1, [r0, #DMC_MEMCONFIG0]
+
+ /*
+ * Memory Configuration Chip 1
+ * Address Mapping: Interleaved
+ * Number of Column address Bits: 10 bits
+ * Number of Rows Address Bits: 14
+ * Number of Banks: 8
+ */
+ ldr r1, =0x40e01323
+ str r1, [r0, #DMC_MEMCONFIG1]
+
+ /* Config Precharge Policy */
+ ldr r1, =0xff000000
+ str r1, [r0, #DMC_PRECHCONFIG]
+
+ /*
+ * TimingAref, TimingRow, TimingData, TimingPower Setting:
+ * Values as per Memory AC Parameters
+ */
+ ldr r1, =0x000000BB
+ str r1, [r0, #DMC_TIMINGAREF]
+ ldr r1, =0x4046654f
+ str r1, [r0, #DMC_TIMINGROW]
+ ldr r1, =0x46400506
+ str r1, [r0, #DMC_TIMINGDATA]
+ ldr r1, =0x52000A3C
+ str r1, [r0, #DMC_TIMINGPOWER]
+
+ /* Chip0: NOP Command: Assert and Hold CKE to high level */
+ ldr r1, =0x07000000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+2: subs r2, r2, #1
+ bne 2b
+
+ /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ ldr r1, =0x00020000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00030000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00010002
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00000328
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+3: subs r2, r2, #1
+ bne 3b
+
+ /* Chip 0: ZQINIT */
+ ldr r1, =0x0a000000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+4: subs r2, r2, #1
+ bne 4b
+
+ /* Chip1: NOP Command: Assert and Hold CKE to high level */
+ ldr r1, =0x07100000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+5: subs r2, r2, #1
+ bne 5b
+
+ /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */
+ ldr r1, =0x00120000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00130000
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00110002
+ str r1, [r0, #DMC_DIRECTCMD]
+ ldr r1, =0x00100328
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+6: subs r2, r2, #1
+ bne 6b
+
+ /* Chip1: ZQINIT */
+ ldr r1, =0x0a100000
+ str r1, [r0, #DMC_DIRECTCMD]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+7: subs r2, r2, #1
+ bne 7b
+
+ ldr r1, =0xe000008e
+ str r1, [r0, #DMC_PHYCONTROL1]
+ ldr r1, =0xe0000086
+ str r1, [r0, #DMC_PHYCONTROL1]
+
+ /* Wait ?us*/
+ mov r2, #0x100000
+8: subs r2, r2, #1
+ bne 8b
+
+ /* turn on DREX0, DREX1 */
+ ldr r0, =S5PC210_DMC0_BASE
+ ldr r1, =0x0FFF303a
+ str r1, [r0, #DMC_CONCONTROL]
+
+ ldr r0, =S5PC210_DMC1_BASE
+ ldr r1, =0x0FFF303a
+ str r1, [r0, #DMC_CONCONTROL]
+
+ mov pc, lr
diff --git a/board/samsung/origen/mmc_boot.c b/board/samsung/origen/mmc_boot.c
new file mode 100644
index 0000000..072f161
--- /dev/null
+++ b/board/samsung/origen/mmc_boot.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include<common.h>
+#include<config.h>
+
+/*
+* Copy U-boot from mmc to RAM:
+* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains
+* Pointer to API (Data transfer from mmc to ram)
+*/
+void copy_uboot_to_ram(void)
+{
+ u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR;
+
+ copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE);
+}
+
+void board_init_f(unsigned long bootflag)
+{
+ __attribute__((noreturn)) void (*uboot)(void);
+ copy_uboot_to_ram();
+
+ /* Jump to U-Boot image */
+ uboot = (void *)CONFIG_SYS_TEXT_BASE;
+ (*uboot)();
+ /* Never returns Here */
+}
+
+/* Place Holders */
+void board_init_r(gd_t *id, ulong dest_addr)
+{
+ /* Function attribute is no-return */
+ /* This Function never executes */
+ while (1)
+ ;
+}
+
+void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {}
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
new file mode 100644
index 0000000..8882646
--- /dev/null
+++ b/board/samsung/origen/origen.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+struct s5pc210_gpio_part1 *gpio1;
+struct s5pc210_gpio_part2 *gpio2;
+
+int board_init(void)
+{
+ gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE;
+ gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE;
+
+ gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL);
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE)
+ + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE);
+
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
+ gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \
+ PHYS_SDRAM_1_SIZE);
+ gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
+ gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \
+ PHYS_SDRAM_2_SIZE);
+ gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
+ gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \
+ PHYS_SDRAM_3_SIZE);
+ gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
+ gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \
+ PHYS_SDRAM_4_SIZE);
+}
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+int checkboard(void)
+{
+ printf("\nBoard: ORIGEN\n");
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ int i, err;
+
+ /*
+ * MMC2 SD card GPIO:
+ *
+ * GPK2[0] SD_2_CLK(2)
+ * GPK2[1] SD_2_CMD(2)
+ * GPK2[2] SD_2_CDn
+ * GPK2[3:6] SD_2_DATA[0:3](2)
+ */
+ for (i = 0; i < 7; i++) {
+ /* GPK2[0:6] special function 2 */
+ s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
+
+ /* GPK2[0:6] drv 4x */
+ s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+
+ /* GPK2[0:1] pull disable */
+ if (i == 0 || i == 1) {
+ s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+ continue;
+ }
+
+ /* GPK2[2:6] pull up */
+ s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
+ }
+
+ err = s5p_mmc_init(2, 4);
+ return err;
+}
+#endif
diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h
new file mode 100644
index 0000000..63d85d8
--- /dev/null
+++ b/board/samsung/origen/origen_setup.h
@@ -0,0 +1,546 @@
+/*
+ * Machine Specific Values for ORIGEN board based on S5PV310
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _ORIGEN_SETUP_H
+#define _ORIGEN_SETUP_H
+
+#include <config.h>
+#include <version.h>
+#include <asm/arch/cpu.h>
+
+/* Offsets of clock registers (sources and dividers) */
+#define CLK_SRC_CPU_OFFSET 0x14200
+#define CLK_DIV_CPU0_OFFSET 0x14500
+#define CLK_DIV_CPU1_OFFSET 0x14504
+
+#define CLK_SRC_DMC_OFFSET 0x10200
+#define CLK_DIV_DMC0_OFFSET 0x10500
+#define CLK_DIV_DMC1_OFFSET 0x10504
+
+#define CLK_SRC_TOP0_OFFSET 0xC210
+#define CLK_SRC_TOP1_OFFSET 0xC214
+#define CLK_DIV_TOP_OFFSET 0xC510
+
+#define CLK_SRC_LEFTBUS_OFFSET 0x4200
+#define CLK_DIV_LEFTBUS_OFFSET 0x4500
+
+#define CLK_SRC_RIGHTBUS_OFFSET 0x8200
+#define CLK_DIV_RIGHTBUS_OFFSET 0x8500
+
+#define CLK_SRC_FSYS_OFFSET 0xC240
+#define CLK_DIV_FSYS1_OFFSET 0xC544
+#define CLK_DIV_FSYS2_OFFSET 0xC548
+#define CLK_DIV_FSYS3_OFFSET 0xC54C
+
+#define CLK_SRC_PERIL0_OFFSET 0xC250
+#define CLK_DIV_PERIL0_OFFSET 0xC550
+
+#define APLL_LOCK_OFFSET 0x14000
+#define MPLL_LOCK_OFFSET 0x14008
+#define APLL_CON0_OFFSET 0x14100
+#define APLL_CON1_OFFSET 0x14104
+#define MPLL_CON0_OFFSET 0x14108
+#define MPLL_CON1_OFFSET 0x1410C
+
+#define EPLL_LOCK_OFFSET 0xC010
+#define VPLL_LOCK_OFFSET 0xC020
+#define EPLL_CON0_OFFSET 0xC110
+#define EPLL_CON1_OFFSET 0xC114
+#define VPLL_CON0_OFFSET 0xC120
+#define VPLL_CON1_OFFSET 0xC124
+
+/* DMC: DRAM Controllor Register offsets */
+#define DMC_CONCONTROL 0x00
+#define DMC_MEMCONTROL 0x04
+#define DMC_MEMCONFIG0 0x08
+#define DMC_MEMCONFIG1 0x0C
+#define DMC_DIRECTCMD 0x10
+#define DMC_PRECHCONFIG 0x14
+#define DMC_PHYCONTROL0 0x18
+#define DMC_PHYCONTROL1 0x1C
+#define DMC_PHYCONTROL2 0x20
+#define DMC_TIMINGAREF 0x30
+#define DMC_TIMINGROW 0x34
+#define DMC_TIMINGDATA 0x38
+#define DMC_TIMINGPOWER 0x3C
+#define DMC_PHYZQCONTROL 0x44
+
+/* Bus Configuration Register Address */
+#define ASYNC_CONFIG 0x10010350
+
+/* MIU Config Register Offsets*/
+#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400
+#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00
+
+/* Offset for inform registers */
+#define INFORM0_OFFSET 0x800
+#define INFORM1_OFFSET 0x804
+
+/* GPIO Offsets for UART: GPIO Contol Register */
+#define S5PC210_GPIO_A0_CON_OFFSET 0x00
+#define S5PC210_GPIO_A1_CON_OFFSET 0x20
+
+/* UART Register offsets */
+#define ULCON_OFFSET 0x00
+#define UCON_OFFSET 0x04
+#define UFCON_OFFSET 0x08
+#define UBRDIV_OFFSET 0x28
+#define UFRACVAL_OFFSET 0x2C
+
+/* TZPC : Register Offsets */
+#define TZPC0_BASE 0x10110000
+#define TZPC1_BASE 0x10120000
+#define TZPC2_BASE 0x10130000
+#define TZPC3_BASE 0x10140000
+#define TZPC4_BASE 0x10150000
+#define TZPC5_BASE 0x10160000
+
+#define TZPC_DECPROT0SET_OFFSET 0x804
+#define TZPC_DECPROT1SET_OFFSET 0x810
+#define TZPC_DECPROT2SET_OFFSET 0x81C
+#define TZPC_DECPROT3SET_OFFSET 0x828
+
+/* CLK_SRC_CPU */
+#define MUX_HPM_SEL_MOUTAPLL 0x0
+#define MUX_HPM_SEL_SCLKMPLL 0x1
+#define MUX_CORE_SEL_MOUTAPLL 0x0
+#define MUX_CORE_SEL_SCLKMPLL 0x1
+#define MUX_MPLL_SEL_FILPLL 0x0
+#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1
+#define MUX_APLL_SEL_FILPLL 0x0
+#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1
+#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \
+ | (MUX_CORE_SEL_MOUTAPLL << 16) \
+ | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\
+ | (MUX_APLL_SEL_MOUTMPLLFOUT << 0))
+
+/* CLK_DIV_CPU0 */
+#define APLL_RATIO 0x0
+#define PCLK_DBG_RATIO 0x1
+#define ATB_RATIO 0x3
+#define PERIPH_RATIO 0x3
+#define COREM1_RATIO 0x7
+#define COREM0_RATIO 0x3
+#define CORE_RATIO 0x0
+#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \
+ | (PCLK_DBG_RATIO << 20) \
+ | (ATB_RATIO << 16) \
+ | (PERIPH_RATIO << 12) \
+ | (COREM1_RATIO << 8) \
+ | (COREM0_RATIO << 4) \
+ | (CORE_RATIO << 0))
+
+/* CLK_DIV_CPU1 */
+#define HPM_RATIO 0x0
+#define COPY_RATIO 0x3
+#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO))
+
+/* CLK_SRC_DMC */
+#define MUX_PWI_SEL_XXTI 0x0
+#define MUX_PWI_SEL_XUSBXTI 0x1
+#define MUX_PWI_SEL_SCLK_HDMI24M 0x2
+#define MUX_PWI_SEL_SCLK_USBPHY0 0x3
+#define MUX_PWI_SEL_SCLK_USBPHY1 0x4
+#define MUX_PWI_SEL_SCLK_HDMIPHY 0x5
+#define MUX_PWI_SEL_SCLKMPLL 0x6
+#define MUX_PWI_SEL_SCLKEPLL 0x7
+#define MUX_PWI_SEL_SCLKVPLL 0x8
+#define MUX_DPHY_SEL_SCLKMPLL 0x0
+#define MUX_DPHY_SEL_SCLKAPLL 0x1
+#define MUX_DMC_BUS_SEL_SCLKMPLL 0x0
+#define MUX_DMC_BUS_SEL_SCLKAPLL 0x1
+#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \
+ | (MUX_DPHY_SEL_SCLKMPLL << 8) \
+ | (MUX_DMC_BUS_SEL_SCLKMPLL << 4))
+
+/* CLK_DIV_DMC0 */
+#define CORE_TIMERS_RATIO 0x1
+#define COPY2_RATIO 0x3
+#define DMCP_RATIO 0x1
+#define DMCD_RATIO 0x1
+#define DMC_RATIO 0x1
+#define DPHY_RATIO 0x1
+#define ACP_PCLK_RATIO 0x1
+#define ACP_RATIO 0x3
+#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \
+ | (COPY2_RATIO << 24) \
+ | (DMCP_RATIO << 20) \
+ | (DMCD_RATIO << 16) \
+ | (DMC_RATIO << 12) \
+ | (DPHY_RATIO << 8) \
+ | (ACP_PCLK_RATIO << 4) \
+ | (ACP_RATIO << 0))
+
+/* CLK_DIV_DMC1 */
+#define DPM_RATIO 0x1
+#define DVSEM_RATIO 0x1
+#define PWI_RATIO 0x1
+#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \
+ | (DVSEM_RATIO << 16) \
+ | (PWI_RATIO << 8))
+
+/* CLK_SRC_TOP0 */
+#define MUX_ONENAND_SEL_ACLK_133 0x0
+#define MUX_ONENAND_SEL_ACLK_160 0x1
+#define MUX_ACLK_133_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_133_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_160_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_160_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_100_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_100_SEL_SCLKAPLL 0x1
+#define MUX_ACLK_200_SEL_SCLKMPLL 0x0
+#define MUX_ACLK_200_SEL_SCLKAPLL 0x1
+#define MUX_VPLL_SEL_FINPLL 0x0
+#define MUX_VPLL_SEL_FOUTVPLL 0x1
+#define MUX_EPLL_SEL_FINPLL 0x0
+#define MUX_EPLL_SEL_FOUTEPLL 0x1
+#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0
+#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1
+#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \
+ | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \
+ | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \
+ | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \
+ | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \
+ | (MUX_VPLL_SEL_FINPLL << 8) \
+ | (MUX_EPLL_SEL_FINPLL << 4)\
+ | (MUX_ONENAND_1_SEL_MOUTONENAND << 0))
+
+/* CLK_SRC_TOP1 */
+#define VPLLSRC_SEL_FINPLL 0x0
+#define VPLLSRC_SEL_SCLKHDMI24M 0x1
+#define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL)
+
+/* CLK_DIV_TOP */
+#define ONENAND_RATIO 0x0
+#define ACLK_133_RATIO 0x5
+#define ACLK_160_RATIO 0x4
+#define ACLK_100_RATIO 0x7
+#define ACLK_200_RATIO 0x3
+#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \
+ | (ACLK_133_RATIO << 12)\
+ | (ACLK_160_RATIO << 8) \
+ | (ACLK_100_RATIO << 4) \
+ | (ACLK_200_RATIO << 0))
+
+/* CLK_SRC_LEFTBUS */
+#define MUX_GDL_SEL_SCLKMPLL 0x0
+#define MUX_GDL_SEL_SCLKAPLL 0x1
+#define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL)
+
+/* CLK_DIV_LEFTBUS */
+#define GPL_RATIO 0x1
+#define GDL_RATIO 0x3
+#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO))
+
+/* CLK_SRC_RIGHTBUS */
+#define MUX_GDR_SEL_SCLKMPLL 0x0
+#define MUX_GDR_SEL_SCLKAPLL 0x1
+#define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL)
+
+/* CLK_DIV_RIGHTBUS */
+#define GPR_RATIO 0x1
+#define GDR_RATIO 0x3
+#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO))
+
+/* CLK_SRS_FSYS: 6 = SCLKMPLL */
+#define SATA_SEL_SCLKMPLL 0
+#define SATA_SEL_SCLKAPLL 1
+
+#define MMC_SEL_XXTI 0
+#define MMC_SEL_XUSBXTI 1
+#define MMC_SEL_SCLK_HDMI24M 2
+#define MMC_SEL_SCLK_USBPHY0 3
+#define MMC_SEL_SCLK_USBPHY1 4
+#define MMC_SEL_SCLK_HDMIPHY 5
+#define MMC_SEL_SCLKMPLL 6
+#define MMC_SEL_SCLKEPLL 7
+#define MMC_SEL_SCLKVPLL 8
+
+#define MMCC0_SEL MMC_SEL_SCLKMPLL
+#define MMCC1_SEL MMC_SEL_SCLKMPLL
+#define MMCC2_SEL MMC_SEL_SCLKMPLL
+#define MMCC3_SEL MMC_SEL_SCLKMPLL
+#define MMCC4_SEL MMC_SEL_SCLKMPLL
+#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \
+ | (MMCC4_SEL << 16) \
+ | (MMCC3_SEL << 12) \
+ | (MMCC2_SEL << 8) \
+ | (MMCC1_SEL << 4) \
+ | (MMCC0_SEL << 0))
+
+/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */
+/* CLK_DIV_FSYS1 */
+#define MMC0_RATIO 0xF
+#define MMC0_PRE_RATIO 0x0
+#define MMC1_RATIO 0xF
+#define MMC1_PRE_RATIO 0x0
+#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \
+ | (MMC1_RATIO << 16) \
+ | (MMC0_PRE_RATIO << 8) \
+ | (MMC0_RATIO << 0))
+
+/* CLK_DIV_FSYS2 */
+#define MMC2_RATIO 0xF
+#define MMC2_PRE_RATIO 0x0
+#define MMC3_RATIO 0xF
+#define MMC3_PRE_RATIO 0x0
+#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \
+ | (MMC3_RATIO << 16) \
+ | (MMC2_PRE_RATIO << 8) \
+ | (MMC2_RATIO << 0))
+
+/* CLK_DIV_FSYS3 */
+#define MMC4_RATIO 0xF
+#define MMC4_PRE_RATIO 0x0
+#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \
+ | (MMC4_RATIO << 0))
+
+/* CLK_SRC_PERIL0 */
+#define UART_SEL_XXTI 0
+#define UART_SEL_XUSBXTI 1
+#define UART_SEL_SCLK_HDMI24M 2
+#define UART_SEL_SCLK_USBPHY0 3
+#define UART_SEL_SCLK_USBPHY1 4
+#define UART_SEL_SCLK_HDMIPHY 5
+#define UART_SEL_SCLKMPLL 6
+#define UART_SEL_SCLKEPLL 7
+#define UART_SEL_SCLKVPLL 8
+
+#define UART0_SEL UART_SEL_SCLKMPLL
+#define UART1_SEL UART_SEL_SCLKMPLL
+#define UART2_SEL UART_SEL_SCLKMPLL
+#define UART3_SEL UART_SEL_SCLKMPLL
+#define UART4_SEL UART_SEL_SCLKMPLL
+#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \
+ | (UART3_SEL << 12) \
+ | (UART2_SEL << 8) \
+ | (UART1_SEL << 4) \
+ | (UART0_SEL << 0))
+
+/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */
+/* CLK_DIV_PERIL0 */
+#define UART0_RATIO 7
+#define UART1_RATIO 7
+#define UART2_RATIO 7
+#define UART3_RATIO 7
+#define UART4_RATIO 7
+#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \
+ | (UART3_RATIO << 12) \
+ | (UART2_RATIO << 8) \
+ | (UART1_RATIO << 4) \
+ | (UART0_RATIO << 0))
+
+/* Required period to generate a stable clock output */
+/* PLL_LOCK_TIME */
+#define PLL_LOCKTIME 0x1C20
+
+/* PLL Values */
+#define DISABLE 0
+#define ENABLE 1
+#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\
+ | (mdiv << 16) \
+ | (pdiv << 8) \
+ | (sdiv << 0))
+
+/* APLL_CON0 */
+#define APLL_MDIV 0xFA
+#define APLL_PDIV 0x6
+#define APLL_SDIV 0x1
+#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV)
+
+/* APLL_CON1 */
+#define APLL_AFC_ENB 0x1
+#define APLL_AFC 0xC
+#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0))
+
+/* MPLL_CON0 */
+#define MPLL_MDIV 0xC8
+#define MPLL_PDIV 0x6
+#define MPLL_SDIV 0x1
+#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV)
+
+/* MPLL_CON1 */
+#define MPLL_AFC_ENB 0x0
+#define MPLL_AFC 0x1C
+#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0))
+
+/* EPLL_CON0 */
+#define EPLL_MDIV 0x30
+#define EPLL_PDIV 0x3
+#define EPLL_SDIV 0x2
+#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV)
+
+/* EPLL_CON1 */
+#define EPLL_K 0x0
+#define EPLL_CON1_VAL (EPLL_K >> 0)
+
+/* VPLL_CON0 */
+#define VPLL_MDIV 0x35
+#define VPLL_PDIV 0x3
+#define VPLL_SDIV 0x2
+#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV)
+
+/* VPLL_CON1 */
+#define VPLL_SSCG_EN DISABLE
+#define VPLL_SEL_PF_DN_SPREAD 0x0
+#define VPLL_MRR 0x11
+#define VPLL_MFR 0x0
+#define VPLL_K 0x400
+#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\
+ | (VPLL_SEL_PF_DN_SPREAD << 29) \
+ | (VPLL_MRR << 24) \
+ | (VPLL_MFR << 16) \
+ | (VPLL_K << 0))
+/*
+ * UART GPIO_A0/GPIO_A1 Control Register Value
+ * 0x2: UART Function
+ */
+#define S5PC210_GPIO_A0_CON_VAL 0x22222222
+#define S5PC210_GPIO_A1_CON_VAL 0x222222
+
+/* ULCON: UART Line Control Value 8N1 */
+#define WORD_LEN_5_BIT 0x00
+#define WORD_LEN_6_BIT 0x01
+#define WORD_LEN_7_BIT 0x02
+#define WORD_LEN_8_BIT 0x03
+
+#define STOP_BIT_1 0x00
+#define STOP_BIT_2 0x01
+
+#define NO_PARITY 0x00
+#define ODD_PARITY 0x4
+#define EVEN_PARITY 0x5
+#define FORCED_PARITY_CHECK_AS_1 0x6
+#define FORCED_PARITY_CHECK_AS_0 0x7
+
+#define INFRAMODE_NORMAL 0x00
+#define INFRAMODE_INFRARED 0x01
+
+#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \
+ | (NO_PARITY << 3) \
+ | (STOP_BIT_1 << 2) \
+ | (WORD_LEN_8_BIT << 0))
+
+/*
+ * UCON: UART Control Value
+ * Tx_interrupt Type: Level
+ * Rx_interrupt Type: Level
+ * Rx Timeout Enabled: Yes
+ * Rx-Error Atatus_Int Enable: Yes
+ * Loop_Back: No
+ * Break Signal: No
+ * Transmit mode : Interrupt request/polling
+ * Receive mode : Interrupt request/polling
+ */
+#define TX_PULSE_INTERRUPT 0
+#define TX_LEVEL_INTERRUPT 1
+#define RX_PULSE_INTERRUPT 0
+#define RX_LEVEL_INTERRUPT 1
+
+#define RX_TIME_OUT ENABLE
+#define RX_ERROR_STATE_INT_ENB ENABLE
+#define LOOP_BACK DISABLE
+#define BREAK_SIGNAL DISABLE
+
+#define TX_MODE_DISABLED 0X00
+#define TX_MODE_IRQ_OR_POLL 0X01
+#define TX_MODE_DMA 0X02
+
+#define RX_MODE_DISABLED 0X00
+#define RX_MODE_IRQ_OR_POLL 0X01
+#define RX_MODE_DMA 0X02
+
+#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \
+ | (RX_LEVEL_INTERRUPT << 8) \
+ | (RX_TIME_OUT << 7) \
+ | (RX_ERROR_STATE_INT_ENB << 6) \
+ | (LOOP_BACK << 5) \
+ | (BREAK_SIGNAL << 4) \
+ | (TX_MODE_IRQ_OR_POLL << 2) \
+ | (RX_MODE_IRQ_OR_POLL << 0))
+
+/*
+ * UFCON: UART FIFO Control Value
+ * Tx FIFO Trigger LEVEL: 2 Bytes (001)
+ * Rx FIFO Trigger LEVEL: 2 Bytes (001)
+ * Tx Fifo Reset: No
+ * Rx Fifo Reset: No
+ * FIFO Enable: Yes
+ */
+#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00
+#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1
+#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2
+#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3
+#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4
+#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5
+#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6
+#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7
+
+#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0
+#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1
+#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2
+#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3
+#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4
+#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5
+#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6
+#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7
+
+#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES
+#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES
+#define TX_FIFO_RESET DISABLE
+#define RX_FIFO_RESET DISABLE
+#define FIFO_ENABLE ENABLE
+#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \
+ | (RX_FIFO_TRIGGER_LEVEL << 4) \
+ | (TX_FIFO_RESET << 2) \
+ | (RX_FIFO_RESET << 1) \
+ | (FIFO_ENABLE << 0))
+/*
+ * Baud Rate Division Value
+ * 115200 BAUD:
+ * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1)
+ * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1)
+ */
+#define UBRDIV_VAL 0x35
+
+/*
+ * Fractional Part of Baud Rate Divisor:
+ * 115200 BAUD:
+ * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10)
+ * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10)
+ */
+#define UFRACVAL_VAL 0x4
+
+/*
+ * TZPC Register Value :
+ * R0SIZE: 0x0 : Size of secured ram
+ */
+#define R0SIZE 0x0
+
+/*
+ * TZPC Decode Protection Register Value :
+ * DECPROTXSET: 0xFF : Set Decode region to non-secure
+ */
+#define DECPROTXSET 0xFF
+#endif
diff --git a/board/samsung/origen/tools/mkv310_image.c b/board/samsung/origen/tools/mkv310_image.c
new file mode 100644
index 0000000..158aab5
--- /dev/null
+++ b/board/samsung/origen/tools/mkv310_image.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <errno.h>
+#include <string.h>
+#include <sys/stat.h>
+
+#define BUFSIZE (16*1024)
+#define IMG_SIZE (16*1024)
+#define SPL_HEADER_SIZE 16
+#define FILE_PERM (S_IRUSR | S_IWUSR | S_IRGRP \
+ | S_IWGRP | S_IROTH | S_IWOTH)
+#define SPL_HEADER "S5PC210 HEADER "
+/*
+* Requirement:
+* IROM code reads first 14K bytes from boot device.
+* It then calculates the checksum of 14K-4 bytes and compare with data at
+* 14K-4 offset.
+*
+* This function takes two filenames:
+* IN "u-boot-spl.bin" and
+* OUT "$(BOARD)-spl.bin as filenames.
+* It reads the "u-boot-spl.bin" in 16K buffer.
+* It calculates checksum of 14K-4 Bytes and stores at 14K-4 offset in buffer.
+* It writes the buffer to "$(BOARD)-spl.bin" file.
+*/
+
+int main(int argc, char **argv)
+{
+ int i, len;
+ unsigned char buffer[BUFSIZE] = {0};
+ int ifd, ofd;
+ unsigned int checksum = 0, count;
+
+ if (argc != 3) {
+ printf(" %d Wrong number of arguments\n", argc);
+ exit(EXIT_FAILURE);
+ }
+
+ ifd = open(argv[1], O_RDONLY);
+ if (ifd < 0) {
+ fprintf(stderr, "%s: Can't open %s: %s\n",
+ argv[0], argv[1], strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ ofd = open(argv[2], O_WRONLY | O_CREAT | O_TRUNC, FILE_PERM);
+ if (ifd < 0) {
+ fprintf(stderr, "%s: Can't open %s: %s\n",
+ argv[0], argv[2], strerror(errno));
+ if (ifd)
+ close(ifd);
+ exit(EXIT_FAILURE);
+ }
+
+ len = lseek(ifd, 0, SEEK_END);
+ lseek(ifd, 0, SEEK_SET);
+
+ memcpy(&buffer[0], SPL_HEADER, SPL_HEADER_SIZE);
+
+ count = (len < (IMG_SIZE - SPL_HEADER_SIZE))
+ ? len : (IMG_SIZE - SPL_HEADER_SIZE);
+
+ if (read(ifd, buffer + SPL_HEADER_SIZE, count) != count) {
+ fprintf(stderr, "%s: Can't read %s: %s\n",
+ argv[0], argv[1], strerror(errno));
+
+ if (ifd)
+ close(ifd);
+ if (ofd)
+ close(ofd);
+
+ exit(EXIT_FAILURE);
+ }
+
+ for (i = 0; i < IMG_SIZE - SPL_HEADER_SIZE; i++)
+ checksum += buffer[i+16];
+
+ *(ulong *)buffer ^= 0x1f;
+ *(ulong *)(buffer+4) ^= checksum;
+
+ for (i = 1; i < SPL_HEADER_SIZE; i++)
+ buffer[i] ^= buffer[i-1];
+
+ if (write(ofd, buffer, BUFSIZE) != BUFSIZE) {
+ fprintf(stderr, "%s: Can't write %s: %s\n",
+ argv[0], argv[2], strerror(errno));
+
+ if (ifd)
+ close(ifd);
+ if (ofd)
+ close(ofd);
+
+ exit(EXIT_FAILURE);
+ }
+
+ if (ifd)
+ close(ifd);
+ if (ofd)
+ close(ofd);
+
+ return EXIT_SUCCESS;
+}
diff --git a/board/samsung/smdk2400/Makefile b/board/samsung/smdk2400/Makefile
deleted file mode 100644
index 0c45d02..0000000
--- a/board/samsung/smdk2400/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := smdk2400.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/samsung/smdk2400/config.mk b/board/samsung/smdk2400/config.mk
deleted file mode 100644
index 4c27dc3..0000000
--- a/board/samsung/smdk2400/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# SAMSUNG board with S3C2400X (ARM920T) CPU
-#
-# see http://www.samsung.com/ for more information on SAMSUNG
-#
-
-#
-# SAMSUNG has 1 bank of 32 MB DRAM
-#
-# 0C00'0000 to 0E00'0000
-#
-# Linux-Kernel is expected to be at 0cf0'0000, entry 0cf0'0000
-# optionally with a ramdisk at 0c80'0000
-#
-# we load ourself to 0CF80000 (must be high enough not to be
-# overwritten by the uncompessing Linux kernel)
-#
-# download area is 0C80'0000
-#
-
-
-CONFIG_SYS_TEXT_BASE = 0x0CF80000
diff --git a/board/samsung/smdk2400/flash.c b/board/samsung/smdk2400/flash.c
deleted file mode 100644
index 47382fe..0000000
--- a/board/samsung/smdk2400/flash.c
+++ /dev/null
@@ -1,492 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-#include <common.h>
-#include <environment.h>
-
-#define FLASH_BANK_SIZE 0x1000000 /* 2 x 8 MB */
-#define MAIN_SECT_SIZE 0x40000 /* 2 x 128 kB */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-#define CMD_READ_ARRAY 0x00FF00FF
-#define CMD_IDENTIFY 0x00900090
-#define CMD_ERASE_SETUP 0x00200020
-#define CMD_ERASE_CONFIRM 0x00D000D0
-#define CMD_PROGRAM 0x00400040
-#define CMD_RESUME 0x00D000D0
-#define CMD_SUSPEND 0x00B000B0
-#define CMD_STATUS_READ 0x00700070
-#define CMD_STATUS_RESET 0x00500050
-
-#define BIT_BUSY 0x00800080
-#define BIT_ERASE_SUSPEND 0x00400040
-#define BIT_ERASE_ERROR 0x00200020
-#define BIT_PROGRAM_ERROR 0x00100010
-#define BIT_VPP_RANGE_ERROR 0x00080008
-#define BIT_PROGRAM_SUSPEND 0x00040004
-#define BIT_PROTECT_ERROR 0x00020002
-#define BIT_UNDEFINED 0x00010001
-
-#define BIT_SEQUENCE_ERROR 0x00300030
-#define BIT_TIMEOUT 0x80000000
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F640J3A & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = CONFIG_SYS_FLASH_BASE;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase;
-
- /* uniform sector size */
- flashbase += MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /*
- * Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, &flash_info[0]);
-
-#ifdef CONFIG_ENV_ADDR_REDUND
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-#endif
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F640J3A & FLASH_TYPEMASK):
- printf ("2x 28F640J3A (64Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
-Done: ;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_error (ulong code)
-{
- /* Check bit patterns */
- /* SR.7=0 is busy, SR.7=1 is ready */
- /* all other flags indicate error on 1 */
- /* SR.0 is undefined */
- /* Timeout is our faked flag */
-
- /* sequence is described in Intel 290644-005 document */
-
- /* check Timeout */
- if (code & BIT_TIMEOUT) {
- puts ("Timeout\n");
- return ERR_TIMOUT;
- }
-
- /* check Busy, SR.7 */
- if (~code & BIT_BUSY) {
- puts ("Busy\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Vpp low, SR.3 */
- if (code & BIT_VPP_RANGE_ERROR) {
- puts ("Vpp range error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Device Protect Error, SR.1 */
- if (code & BIT_PROTECT_ERROR) {
- puts ("Device protect error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Command Seq Error, SR.4 & SR.5 */
- if (code & BIT_SEQUENCE_ERROR) {
- puts ("Command seqence error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Error, SR.5 */
- if (code & BIT_ERASE_ERROR) {
- puts ("Block erase error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Error, SR.4 */
- if (code & BIT_PROGRAM_ERROR) {
- puts ("Program error\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Block Erase Suspended, SR.6 */
- if (code & BIT_ERASE_SUSPEND) {
- puts ("Block erase suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* check Program Suspended, SR.2 */
- if (code & BIT_PROGRAM_SUSPEND) {
- puts ("Program suspended\n");
- return ERR_PROG_ERROR;
- }
-
- /* OK, no error */
- return ERR_OK;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ulong result, result1;
- int iflag, prot, sect;
- int rc = ERR_OK;
- ulong start;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- debug ("flash_erase: s_first %d s_last %d\n", s_first, s_last);
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (INTEL_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-
- debug ("Erasing sector %2d @ %08lX... ",
- sect, info->start[sect]);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_long *addr = (vu_long *) (info->start[sect]);
- ulong bsR7, bsR7_2, bsR5, bsR5_2;
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_ERASE_SETUP;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_STATUS_RESET;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- bsR7 = result & (1 << 7);
- bsR7_2 = result & (1 << 23);
- } while (!bsR7 | !bsR7_2);
-
- *addr = CMD_STATUS_READ;
- result1 = *addr;
- bsR5 = result1 & (1 << 5);
- bsR5_2 = result1 & (1 << 21);
-#ifdef SAMSUNG_FLASH_DEBUG
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
- if (bsR5 != 0 && bsR5_2 != 0)
- printf ("bsR5 %lx bsR5_2 %lx\n", bsR5, bsR5_2);
-#endif
-
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
-
- if ((rc = flash_error (result)) != ERR_OK)
- goto outahere;
-#if 0
- printf ("ok.\n");
- } else { /* it was protected */
-
- printf ("protected!\n");
-#endif
- }
- }
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- vu_long *addr = (vu_long *) dest;
- ulong result;
- int rc = ERR_OK;
- int iflag;
- ulong start;
-
-#ifdef USE_920T_MMU
- int cflag;
-#endif
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-#ifdef USE_920T_MMU
- cflag = dcache_status ();
- dcache_disable ();
-#endif
- iflag = disable_interrupts ();
-
- /* *addr = CMD_STATUS_RESET; */
- *addr = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait until flash is ready */
- do {
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = CMD_SUSPEND;
- result = BIT_TIMEOUT;
- break;
- }
-
- *addr = CMD_STATUS_READ;
- result = *addr;
- } while (~result & BIT_BUSY);
-
- /* *addr = CMD_READ_ARRAY; */
- *addr = CMD_STATUS_READ;
- result = *addr;
-
- rc = flash_error (result);
-
- if (iflag)
- enable_interrupts ();
-
-#ifdef USE_920T_MMU
- if (cflag)
- dcache_enable ();
-#endif
- *addr = CMD_READ_ARRAY;
- *addr = CMD_RESUME;
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int l;
- int i, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = *((vu_long *) src);
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- src += 4;
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 24);
- }
-
- return write_word (info, wp, data);
-}
diff --git a/board/samsung/smdk2400/lowlevel_init.S b/board/samsung/smdk2400/lowlevel_init.S
deleted file mode 100644
index c275c07..0000000
--- a/board/samsung/smdk2400/lowlevel_init.S
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the Samsung development board by
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/* some parameters for the board */
-
-/*
- *
- * Taken from linux/arch/arm/boot/compressed/head-s3c2400.S
- *
- * Copyright (C) 2001 Samsung Electronics by chc, 010406
- *
- * S3C2400 specific tweaks.
- *
- */
-
-/* memory controller */
-#define BWSCON 0x14000000
-#define BANKCON3 0x14000010 /* for cs8900, ethernet */
-
-/* Bank0 */
-#define B0_Tacs 0x0 /* 0 clk */
-#define B0_Tcos 0x0 /* 0 clk */
-#define B0_Tacc 0x7 /* 14 clk */
-#define B0_Tcoh 0x0 /* 0 clk */
-#define B0_Tah 0x0 /* 0 clk */
-#define B0_Tacp 0x0
-#define B0_PMC 0x0 /* normal */
-
-/* Bank1 */
-#define B1_Tacs 0x0 /* 0 clk */
-#define B1_Tcos 0x0 /* 0 clk */
-#define B1_Tacc 0x7 /* 14 clk */
-#define B1_Tcoh 0x0 /* 0 clk */
-#define B1_Tah 0x0 /* 0 clk */
-#define B1_Tacp 0x0
-#define B1_PMC 0x0 /* normal */
-
-/* Bank2 */
-#define B2_Tacs 0x0 /* 0 clk */
-#define B2_Tcos 0x0 /* 0 clk */
-#define B2_Tacc 0x7 /* 14 clk */
-#define B2_Tcoh 0x0 /* 0 clk */
-#define B2_Tah 0x0 /* 0 clk */
-#define B2_Tacp 0x0
-#define B2_PMC 0x0 /* normal */
-
-/* Bank3 - setup for the cs8900 */
-#define B3_Tacs 0x0 /* 0 clk */
-#define B3_Tcos 0x3 /* 4 clk */
-#define B3_Tacc 0x7 /* 14 clk */
-#define B3_Tcoh 0x1 /* 1 clk */
-#define B3_Tah 0x0 /* 0 clk */
-#define B3_Tacp 0x3 /* 6 clk */
-#define B3_PMC 0x0 /* normal */
-
-/* Bank4 */
-#define B4_Tacs 0x0 /* 0 clk */
-#define B4_Tcos 0x0 /* 0 clk */
-#define B4_Tacc 0x7 /* 14 clk */
-#define B4_Tcoh 0x0 /* 0 clk */
-#define B4_Tah 0x0 /* 0 clk */
-#define B4_Tacp 0x0
-#define B4_PMC 0x0 /* normal */
-
-/* Bank5 */
-#define B5_Tacs 0x0 /* 0 clk */
-#define B5_Tcos 0x0 /* 0 clk */
-#define B5_Tacc 0x7 /* 14 clk */
-#define B5_Tcoh 0x0 /* 0 clk */
-#define B5_Tah 0x0 /* 0 clk */
-#define B5_Tacp 0x0
-#define B5_PMC 0x0 /* normal */
-
-/* Bank6 */
-#define B6_MT 0x3 /* SDRAM */
-#define B6_Trcd 0x1 /* 3clk */
-#define B6_SCAN 0x1 /* 9 bit */
-
-/* Bank7 */
-#define B7_MT 0x3 /* SDRAM */
-#define B7_Trcd 0x1 /* 3clk */
-#define B7_SCAN 0x1 /* 9 bit */
-
-/* refresh parameter */
-#define REFEN 0x1 /* enable refresh */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/auto refresh */
-#define Trp 0x0 /* 2 clk */
-#define Trc 0x3 /* 7 clk */
-#define Tchr 0x2 /* 3 clk */
-
-#define REFCNT 1113 /* period=15.6 us, HCLK=60Mhz, (2048+1-15.6*66) */
-
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
- /* memory control configuration */
- /* make r0 relative the current location so that it */
- /* reads SMRDATA out of FLASH rather than memory ! */
- ldr r0, =SMRDATA
- ldr r1, _TEXT_BASE
- sub r0, r0, r1
- ldr r1, =BWSCON /* Bus Width Status Controller */
- add r2, r0, #52
-0:
- ldr r3, [r0], #4
- str r3, [r1], #4
- cmp r2, r0
- bne 0b
-
- /* everything is fine now */
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-SMRDATA:
- .word 0x2211d114 /* d->Ethernet, BUSWIDTH=32 */
- .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC)) /* GCS0 */
- .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC)) /* GCS1 */
- .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC)) /* GCS2 */
- .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC)) /* GCS3 */
- .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC)) /* GCS4 */
- .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC)) /* GCS5 */
- .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN)) /* GCS6 */
- .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN)) /* GCS7 */
- .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
- .word 0x10 /* BUSWIDTH=32, SCLK power saving mode, BANKSIZE 32M/32M */
- .word 0x30 /* MRSR6, CL=3clk */
- .word 0x30 /* MRSR7 */
diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c
deleted file mode 100644
index 895bd77..0000000
--- a/board/samsung/smdk2400/smdk2400.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int key_pressed(void);
-int mdm_init (bd_t *);
-extern void disable_putc(void);
-extern void enable_putc(void);
-extern int hwflow_onoff(int);
-extern int do_mdm_init; /* defined in common/main.c */
-#endif /* CONFIG_MODEM_SUPPORT */
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- struct s3c24x0_clock_power * const clk_power =
- s3c24x0_get_base_clock_power();
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- /* memory and cpu-speed are setup before relocation */
- /* change the clock to be 50 MHz 1:1:1 */
- clk_power->mpllcon = 0x5c042;
- clk_power->clkdivn = 0;
- /* set up the I/O ports */
- gpio->pacon = 0x3ffff;
- gpio->pbcon = 0xaaaaaaaa;
- gpio->pbup = 0xffff;
- gpio->pecon = 0x0;
- gpio->peup = 0x0;
-#ifdef CONFIG_HWFLOW
- /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */
- /* 10, 10, 00, 00, 10, 00, 10 */
- gpio->pfcon = 0xa22;
- /* Disable pull-up on Rx, Tx, CTS and RTS pins */
- gpio->pfup = 0x35;
-#else
- /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */
- /* 00, 00, 00, 00, 10, 00, 10 */
- gpio->pfcon = 0x22;
- /* Disable pull-up on Rx and Tx pins */
- gpio->pfup = 0x5;
-#endif /* CONFIG_HWFLOW */
- gpio->pgcon = 0x0;
- gpio->pgup = 0x0;
- gpio->opencr = 0x0;
-
- /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */
- gd->bd->bi_arch_number = MACH_TYPE_SMDK2400;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x0C000100;
-
-#ifdef CONFIG_MODEM_SUPPORT
- if (key_pressed()) {
- disable_putc(); /* modem doesn't understand banner etc */
- do_mdm_init = 1;
- }
-#endif /* CONFIG_MODEM_SUPPORT */
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int key_pressed(void)
-{
- int rc;
- if (1) { /* check for button push here, now just return 1 */
- rc = 1;
- }
-
- return rc;
-}
-#endif /* CONFIG_MODEM_SUPPORT */
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c
index 13c7ed5..c40d1f9 100644
--- a/board/samsung/smdk6400/smdk6400.c
+++ b/board/samsung/smdk6400/smdk6400.c
@@ -72,7 +72,6 @@ int board_init(void)
/* Enable WAIT */
SROM_BW_REG |= 4 | 8 | 1;
- gd->bd->bi_arch_number = MACH_TYPE;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c
index 1ad68b9..c41e610 100644
--- a/board/samsung/smdkc100/smdkc100.c
+++ b/board/samsung/smdkc100/smdkc100.c
@@ -41,7 +41,7 @@ static void smc9115_pre_init(void)
(struct s5pc100_gpio *)samsung_get_base_gpio();
/* gpio configuration GPK0CON */
- gpio_cfg_pin(&gpio->k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+ s5p_gpio_cfg_pin(&gpio->k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
/* Ethernet needs bus width of 16 bits */
smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c
index acf9ee7..e0b89dd 100644
--- a/board/samsung/smdkv310/smdkv310.c
+++ b/board/samsung/smdkv310/smdkv310.c
@@ -37,7 +37,7 @@ static void smc9115_pre_init(void)
u32 smc_bw_conf, smc_bc_conf;
/* gpio configuration GPK0CON */
- gpio_cfg_pin(&gpio2->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+ s5p_gpio_cfg_pin(&gpio2->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
/* Ethernet needs bus width of 16 bits */
smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
@@ -116,19 +116,19 @@ int board_mmc_init(bd_t *bis)
*/
for (i = 0; i < 7; i++) {
/* GPK2[0:6] special function 2 */
- gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
+ s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
/* GPK2[0:6] drv 4x */
- gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+ s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
/* GPK2[0:1] pull disable */
if (i == 0 || i == 1) {
- gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+ s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
continue;
}
/* GPK2[2:6] pull up */
- gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
+ s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
}
err = s5p_mmc_init(2, 4);
return err;
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index b65bc6e..1b27e8b 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -160,7 +160,7 @@ int board_mmc_init(bd_t *bis)
* you should set it HIGH since it removes the inverter
*/
/* MASSMEMORY_EN: XMDMDATA_6: GPE3[6] */
- gpio_direction_output(&gpio1->e3, 6, 0);
+ s5p_gpio_direction_output(&gpio1->e3, 6, 0);
break;
default:
/*
@@ -168,7 +168,7 @@ int board_mmc_init(bd_t *bis)
* But set it as HIGH to ensure
*/
/* MASSMEMORY_EN: XMDMADDR_3: GPE1[3] */
- gpio_direction_output(&gpio1->e1, 3, 1);
+ s5p_gpio_direction_output(&gpio1->e1, 3, 1);
break;
}
@@ -192,25 +192,25 @@ int board_mmc_init(bd_t *bis)
if (i == 2)
continue;
/* GPK0[0:6] special function 2 */
- gpio_cfg_pin(&gpio2->k0, i, 0x2);
+ s5p_gpio_cfg_pin(&gpio2->k0, i, 0x2);
/* GPK0[0:6] pull disable */
- gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
+ s5p_gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE);
/* GPK0[0:6] drv 4x */
- gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
+ s5p_gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X);
}
for (i = 3; i < 7; i++) {
/* GPK1[3:6] special function 3 */
- gpio_cfg_pin(&gpio2->k1, i, 0x3);
+ s5p_gpio_cfg_pin(&gpio2->k1, i, 0x3);
/* GPK1[3:6] pull disable */
- gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
+ s5p_gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE);
/* GPK1[3:6] drv 4x */
- gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
+ s5p_gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X);
}
/* T-flash detect */
- gpio_cfg_pin(&gpio2->x3, 4, 0xf);
- gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
+ s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf);
+ s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
/*
* MMC device init
@@ -223,7 +223,7 @@ int board_mmc_init(bd_t *bis)
* Check the T-flash detect pin
* GPX3[4] T-flash detect pin
*/
- if (!gpio_get_value(&gpio2->x3, 4)) {
+ if (!s5p_gpio_get_value(&gpio2->x3, 4)) {
/*
* SD card GPIO:
* GPK2[0] SD_2_CLK(2)
@@ -235,11 +235,11 @@ int board_mmc_init(bd_t *bis)
if (i == 2)
continue;
/* GPK2[0:6] special function 2 */
- gpio_cfg_pin(&gpio2->k2, i, 0x2);
+ s5p_gpio_cfg_pin(&gpio2->k2, i, 0x2);
/* GPK2[0:6] pull disable */
- gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+ s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
/* GPK2[0:6] drv 4x */
- gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+ s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
}
err = s5p_mmc_init(2, 4);
}
diff --git a/board/sbc2410x/Makefile b/board/sbc2410x/Makefile
deleted file mode 100644
index 2b3b781..0000000
--- a/board/sbc2410x/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := sbc2410x.o flash.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sbc2410x/config.mk b/board/sbc2410x/config.mk
deleted file mode 100644
index bc01a2d..0000000
--- a/board/sbc2410x/config.mk
+++ /dev/null
@@ -1,23 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# SAMSUNG SMDK2410 board with S3C2410X (ARM920T) cpu
-#
-# see http://www.samsung.com/ for more information on SAMSUNG
-#
-
-#
-# SMDK2410 has 1 bank of 64 MB DRAM
-#
-# 3000'0000 to 3400'0000
-#
-# Linux-Kernel is expected to be at 3000'8000, entry 3000'8000
-# optionally with a ramdisk at 3080'0000
-#
-# we load ourself to 33F8'0000
-#
-# download area is 3300'0000
-
-CONFIG_SYS_TEXT_BASE = 0x33F80000
diff --git a/board/sbc2410x/flash.c b/board/sbc2410x/flash.c
deleted file mode 100644
index d209a6f..0000000
--- a/board/sbc2410x/flash.c
+++ /dev/null
@@ -1,433 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-ulong myflush (void);
-
-#define FLASH_BANK_SIZE PHYS_FLASH_SIZE
-#define MAIN_SECT_SIZE 0x10000 /* 64 KB */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-#define CMD_READ_ARRAY 0x000000F0
-#define CMD_UNLOCK1 0x000000AA
-#define CMD_UNLOCK2 0x00000055
-#define CMD_ERASE_SETUP 0x00000080
-#define CMD_ERASE_CONFIRM 0x00000030
-#define CMD_PROGRAM 0x000000A0
-#define CMD_UNLOCK_BYPASS 0x00000020
-
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555 << 1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA << 1)))
-
-#define BIT_ERASE_DONE 0x00000080
-#define BIT_RDY_MASK 0x00000080
-#define BIT_PROGRAM_ERROR 0x00000020
-#define BIT_TIMEOUT 0x80000000 /* our flag */
-
-#define READY 1
-#define ERR 2
-#define TMO 4
-
-/*-----------------------------------------------------------------------
- */
-
-ulong flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- flash_info[i].flash_id =
-#if defined(CONFIG_AMD_LV400)
- (AMD_MANUFACT & FLASH_VENDMASK) |
- (AMD_ID_LV400B & FLASH_TYPEMASK);
-#elif defined(CONFIG_AMD_LV800)
- (AMD_MANUFACT & FLASH_VENDMASK) |
- (AMD_ID_LV800B & FLASH_TYPEMASK);
-#else
-#error "Unknown flash configured"
-#endif
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic ("configured too many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++) {
- if (j <= 3) {
- /* 1st one is 16 KB */
- if (j == 0) {
- flash_info[i].start[j] =
- flashbase + 0;
- }
-
- /* 2nd and 3rd are both 8 KB */
- if ((j == 1) || (j == 2)) {
- flash_info[i].start[j] =
- flashbase + 0x4000 + (j -
- 1) *
- 0x2000;
- }
-
- /* 4th 32 KB */
- if (j == 3) {
- flash_info[i].start[j] =
- flashbase + 0x8000;
- }
- } else {
- flash_info[i].start[j] =
- flashbase + (j - 3) * MAIN_SECT_SIZE;
- }
- }
- size += flash_info[i].size;
- }
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- printf ("AMD: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (AMD_ID_LV400B & FLASH_TYPEMASK):
- printf ("1x Amd29LV400BB (4Mbit)\n");
- break;
- case (AMD_ID_LV800B & FLASH_TYPEMASK):
- printf ("1x Amd29LV800BB (8Mbit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-
- Done:;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- ushort result;
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
- int chip;
- ulong start;
-
- /* first look for protection bits */
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (AMD_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot)
- return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
- vu_short *addr = (vu_short *) (info->start[sect]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- chip = 0;
-
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) >
- CONFIG_SYS_FLASH_ERASE_TOUT) {
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
- chip = TMO;
- break;
- }
-
- if (!chip
- && (result & 0xFFFF) & BIT_ERASE_DONE)
- chip = READY;
-
- if (!chip
- && (result & 0xFFFF) & BIT_PROGRAM_ERROR)
- chip = ERR;
-
- } while (!chip);
-
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
- if (chip == ERR) {
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (chip == TMO) {
- rc = ERR_TIMOUT;
- goto outahere;
- }
-
- printf ("ok.\n");
- } else { /* it was protected */
-
- printf ("protected!\n");
- }
- }
-
- if (ctrlc ())
- printf ("User Interrupt!\n");
-
- outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked (10000);
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash
- */
-
-static int write_hword (flash_info_t * info, ulong dest, ushort data)
-{
- vu_short *addr = (vu_short *) dest;
- ushort result;
- int rc = ERR_OK;
- int cflag, iflag;
- int chip;
- ulong start;
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_UNLOCK_BYPASS;
- *addr = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- get_timer(start);
-
- /* wait until flash is ready */
- chip = 0;
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- chip = ERR | TMO;
- break;
- }
- if (!chip && ((result & 0x80) == (data & 0x80)))
- chip = READY;
-
- if (!chip && ((result & 0xFFFF) & BIT_PROGRAM_ERROR)) {
- result = *addr;
-
- if ((result & 0x80) == (data & 0x80))
- chip = READY;
- else
- chip = ERR;
- }
-
- } while (!chip);
-
- *addr = CMD_READ_ARRAY;
-
- if (chip == ERR || *addr != data)
- rc = ERR_PROG_ERROR;
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash.
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- int l;
- int i, rc;
- ushort data;
-
- wp = (addr & ~1); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
- for (; i < 2 && cnt > 0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- if ((rc = write_hword (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- data = *((vu_short *) src);
- if ((rc = write_hword (info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) {
- return ERR_OK;
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 2 && cnt > 0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i < 2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *) cp << 8);
- }
-
- return write_hword (info, wp, data);
-}
diff --git a/board/sbc2410x/lowlevel_init.S b/board/sbc2410x/lowlevel_init.S
deleted file mode 100644
index 3de9166..0000000
--- a/board/sbc2410x/lowlevel_init.S
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the Samsung SMDK2410 by
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * Modified for the friendly-arm SBC-2410X by
- * (C) Copyright 2005
- * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-/*
- * Taken from linux/arch/arm/boot/compressed/head-s3c2410.S
- *
- * Copyright (C) 2002 Samsung Electronics SW.LEE <hitchcar@sec.samsung.com>
- */
-
-#define BWSCON 0x48000000
-
-/* BWSCON */
-#define DW8 (0x0)
-#define DW16 (0x1)
-#define DW32 (0x2)
-#define WAIT (0x1<<2)
-#define UBLB (0x1<<3)
-
-#define B1_BWSCON (DW16)
-#define B2_BWSCON (DW16)
-#define B3_BWSCON (DW16 + WAIT + UBLB)
-#define B4_BWSCON (DW16)
-#define B5_BWSCON (DW16)
-#define B6_BWSCON (DW32)
-#define B7_BWSCON (DW32)
-
-#define B0_Tacs 0x0
-#define B0_Tcos 0x0
-#define B0_Tacc 0x7
-#define B0_Tcoh 0x0
-#define B0_Tah 0x0
-#define B0_Tacp 0x0
-#define B0_PMC 0x0
-
-#define B1_Tacs 0x0
-#define B1_Tcos 0x0
-#define B1_Tacc 0x7
-#define B1_Tcoh 0x0
-#define B1_Tah 0x0
-#define B1_Tacp 0x0
-#define B1_PMC 0x0
-
-#define B2_Tacs 0x0
-#define B2_Tcos 0x0
-#define B2_Tacc 0x7
-#define B2_Tcoh 0x0
-#define B2_Tah 0x0
-#define B2_Tacp 0x0
-#define B2_PMC 0x0
-
-#define B3_Tacs 0xc
-#define B3_Tcos 0x7
-#define B3_Tacc 0xf
-#define B3_Tcoh 0x1
-#define B3_Tah 0x0
-#define B3_Tacp 0x0
-#define B3_PMC 0x0
-
-#define B4_Tacs 0x0
-#define B4_Tcos 0x0
-#define B4_Tacc 0x7
-#define B4_Tcoh 0x0
-#define B4_Tah 0x0
-#define B4_Tacp 0x0
-#define B4_PMC 0x0
-
-#define B5_Tacs 0xc
-#define B5_Tcos 0x7
-#define B5_Tacc 0xf
-#define B5_Tcoh 0x1
-#define B5_Tah 0x0
-#define B5_Tacp 0x0
-#define B5_PMC 0x0
-
-#define B6_MT 0x3 /* SDRAM */
-#define B6_Trcd 0x1
-#define B6_SCAN 0x1 /* 9bit */
-
-#define B7_MT 0x3 /* SDRAM */
-#define B7_Trcd 0x1 /* 3clk */
-#define B7_SCAN 0x1 /* 9bit */
-
-/* REFRESH parameter */
-#define REFEN 0x1 /* Refresh enable */
-#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
-#define Trp 0x0 /* 2clk */
-#define Trc 0x3 /* 7clk */
-#define Tchr 0x2 /* 3clk */
-#define REFCNT 0x0459
-/**************************************/
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
-.globl lowlevel_init
-lowlevel_init:
- /* memory control configuration */
- /* make r0 relative the current location so that it */
- /* reads SMRDATA out of FLASH rather than memory ! */
- ldr r0, =SMRDATA
- ldr r1, _TEXT_BASE
- sub r0, r0, r1
- ldr r1, =BWSCON /* Bus Width Status Controller */
- add r2, r0, #13*4
-0:
- ldr r3, [r0], #4
- str r3, [r1], #4
- cmp r2, r0
- bne 0b
-
- /* everything is fine now */
- mov pc, lr
-
- .ltorg
-/* the literal pools origin */
-
-SMRDATA:
- .word (0+(B1_BWSCON<<4)+(B2_BWSCON<<8)+(B3_BWSCON<<12)+(B4_BWSCON<<16)+(B5_BWSCON<<20)+(B6_BWSCON<<24)+(B7_BWSCON<<28))
- .word ((B0_Tacs<<13)+(B0_Tcos<<11)+(B0_Tacc<<8)+(B0_Tcoh<<6)+(B0_Tah<<4)+(B0_Tacp<<2)+(B0_PMC))
- .word ((B1_Tacs<<13)+(B1_Tcos<<11)+(B1_Tacc<<8)+(B1_Tcoh<<6)+(B1_Tah<<4)+(B1_Tacp<<2)+(B1_PMC))
- .word ((B2_Tacs<<13)+(B2_Tcos<<11)+(B2_Tacc<<8)+(B2_Tcoh<<6)+(B2_Tah<<4)+(B2_Tacp<<2)+(B2_PMC))
- .word ((B3_Tacs<<13)+(B3_Tcos<<11)+(B3_Tacc<<8)+(B3_Tcoh<<6)+(B3_Tah<<4)+(B3_Tacp<<2)+(B3_PMC))
- .word ((B4_Tacs<<13)+(B4_Tcos<<11)+(B4_Tacc<<8)+(B4_Tcoh<<6)+(B4_Tah<<4)+(B4_Tacp<<2)+(B4_PMC))
- .word ((B5_Tacs<<13)+(B5_Tcos<<11)+(B5_Tacc<<8)+(B5_Tcoh<<6)+(B5_Tah<<4)+(B5_Tacp<<2)+(B5_PMC))
- .word ((B6_MT<<15)+(B6_Trcd<<2)+(B6_SCAN))
- .word ((B7_MT<<15)+(B7_Trcd<<2)+(B7_SCAN))
- .word ((REFEN<<23)+(TREFMD<<22)+(Trp<<20)+(Trc<<18)+(Tchr<<16)+REFCNT)
- .word 0xb2
- .word 0x30
- .word 0x30
diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c
deleted file mode 100644
index c82382d..0000000
--- a/board/sbc2410x/sbc2410x.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2005
- * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/s3c24x0_cpu.h>
-
-#if defined(CONFIG_CMD_NAND)
-#include <linux/mtd/nand.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define FCLK_SPEED 1
-
-#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */
-#define M_MDIV 0xC3
-#define M_PDIV 0x4
-#define M_SDIV 0x1
-#elif FCLK_SPEED==1 /* Fout = 202.8MHz */
-#define M_MDIV 0x5c
-#define M_PDIV 0x4
-#define M_SDIV 0x0
-#endif
-
-#define USB_CLOCK 1
-
-#if USB_CLOCK==0
-#define U_M_MDIV 0xA1
-#define U_M_PDIV 0x3
-#define U_M_SDIV 0x1
-#elif USB_CLOCK==1
-#define U_M_MDIV 0x48
-#define U_M_PDIV 0x3
-#define U_M_SDIV 0x2
-#endif
-
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- struct s3c24x0_clock_power * const clk_power =
- s3c24x0_get_base_clock_power();
- struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
-
- /* to reduce PLL lock time, adjust the LOCKTIME register */
- clk_power->locktime = 0xFFFFFF;
-
- /* configure MPLL */
- clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
-
- /* some delay between MPLL and UPLL */
- delay (4000);
-
- /* configure UPLL */
- clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
-
- /* some delay between MPLL and UPLL */
- delay (8000);
-
- /* set up the I/O ports */
- gpio->gpacon = 0x007FFFFF;
- gpio->gpbcon = 0x00044556;
- gpio->gpbup = 0x000007FF;
- gpio->gpccon = 0xAAAAAAAA;
- gpio->gpcup = 0x0000FFFF;
- gpio->gpdcon = 0xAAAAAAAA;
- gpio->gpdup = 0x0000FFFF;
- gpio->gpecon = 0xAAAAAAAA;
- gpio->gpeup = 0x0000FFFF;
- gpio->gpfcon = 0x000055AA;
- gpio->gpfup = 0x000000FF;
- gpio->gpgcon = 0xFF95FF3A;
- gpio->gpgup = 0x0000FFFF;
- gpio->gphcon = 0x0016FAAA;
- gpio->gphup = 0x000007FF;
-
- gpio->extint0 = 0x22222222;
- gpio->extint1 = 0x22222222;
- gpio->extint2 = 0x22222222;
-
- /* arch number of SMDK2410-Board */
- gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x30000100;
-
- icache_enable();
- dcache_enable();
-
- return 0;
-}
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#if defined(CONFIG_CMD_NAND)
-extern ulong nand_probe(ulong physadr);
-
-static inline void NF_Reset(void)
-{
- int i;
-
- NF_SetCE(NFCE_LOW);
- NF_Cmd(0xFF); /* reset command */
- for(i = 0; i < 10; i++); /* tWB = 100ns. */
- NF_WaitRB(); /* wait 200~500us; */
- NF_SetCE(NFCE_HIGH);
-}
-
-static inline void NF_Init(void)
-{
-#if 1
-#define TACLS 0
-#define TWRPH0 3
-#define TWRPH1 0
-#else
-#define TACLS 0
-#define TWRPH0 4
-#define TWRPH1 2
-#endif
-
- NF_Conf((1<<15)|(0<<14)|(0<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0));
- /*nand->NFCONF = (1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(TACLS<<8)|(TWRPH0<<4)|(TWRPH1<<0); */
- /* 1 1 1 1, 1 xxx, r xxx, r xxx */
- /* En 512B 4step ECCR nFCE=H tACLS tWRPH0 tWRPH1 */
-
- NF_Reset();
-}
-
-void nand_init(void)
-{
- struct s3c2410_nand * const nand = s3c2410_get_base_nand();
-
- NF_Init();
-#ifdef DEBUG
- printf("NAND flash probing at 0x%.8lX\n", (ulong)nand);
-#endif
- printf ("%4lu MB\n", nand_probe((ulong)nand) >> 20);
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c
index 2e31e8c..076c046 100644
--- a/board/scb9328/scb9328.c
+++ b/board/scb9328/scb9328.c
@@ -40,7 +40,7 @@ int board_init (void)
int dram_init (void)
{
/* dram_init must store complete ramsize in gd->ram_size */
- gd->ram_size = get_ram_size((volatile void *)SCB9328_SDRAM_1,
+ gd->ram_size = get_ram_size((void *)SCB9328_SDRAM_1,
SCB9328_SDRAM_1_SIZE);
return 0;
diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c
index f055038..893adc6 100644
--- a/board/syteco/zmx25/zmx25.c
+++ b/board/syteco/zmx25/zmx25.c
@@ -29,7 +29,7 @@
*
*/
#include <common.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/imx25-pinmux.h>
@@ -56,8 +56,7 @@ int board_init()
/* Setup of core volatage selection pin to run at 1.4V */
writel(gpio_mux_mode5, &muxctl->pad_ext_armclk); /* VCORE GPIO3[15] */
- mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(3, 15), MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 15), 1);
+ gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 15), 1);
/* Setup of input daisy chains for SD card pins*/
writel(gpio_mux_mode0_sion, &muxctl->pad_sd1_cmd);
@@ -69,11 +68,10 @@ int board_init()
/* Setup of digital output for USB power and OC */
writel(gpio_mux_mode5, &muxctl->pad_csi_d3); /* USB Power GPIO1[28] */
- mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 28), MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 28), 1);
+ gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 28), 1);
writel(gpio_mux_mode5, &muxctl->pad_csi_d2); /* USB OC GPIO1[27] */
- mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 18), MXC_GPIO_DIRECTION_IN);
+ gpio_direction_input(MXC_GPIO_PORT_TO_NUM(1, 18));
/* Setup of digital output control pins */
writel(gpio_mux_mode5, &muxctl->pad_csi_d8); /* Ouput 1 Ctrl GPIO1[7] */
@@ -85,25 +83,21 @@ int board_init()
writel(0, &padctl->pad_csi_d5); /* Ouput 2 Stat pull up off */
/* Switch both output drivers off */
- mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 7), 0);
- mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 7), MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 6), 0);
- mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 6), MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 7), 0);
+ gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 6), 0);
/* Setup of key input pin GPIO2[29]*/
writel(gpio_mux_mode5 | MX25_PIN_MUX_SION, &muxctl->pad_kpp_row0);
writel(0, &padctl->pad_kpp_row0); /* Key pull up off */
- mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(2, 29), MXC_GPIO_DIRECTION_IN);
+ gpio_direction_input(MXC_GPIO_PORT_TO_NUM(2, 29));
/* Setup of status LED outputs */
writel(gpio_mux_mode5, &muxctl->pad_csi_d9); /* GPIO4[21] */
writel(gpio_mux_mode5, &muxctl->pad_csi_d4); /* GPIO1[29] */
/* Switch both LEDs off */
- mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(4, 21), 0);
- mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(4, 21), MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 29), 0);
- mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(1, 29), MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(MXC_GPIO_PORT_TO_NUM(4, 21), 0);
+ gpio_direction_output(MXC_GPIO_PORT_TO_NUM(1, 29), 0);
/* Setup of CAN1 and CAN2 signals */
writel(gpio_mux_mode6, &muxctl->pad_gpio_a); /* CAN1 TX */
@@ -158,13 +152,12 @@ int board_late_init(void)
writel(gpio_mux_mode2, &muxctl->pad_uart2_cts);
/* assert PHY reset (low) */
- mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 16), 0);
- mxc_gpio_direction(MXC_GPIO_PORT_TO_NUM(3, 16), MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(MXC_GPIO_PORT_TO_NUM(3, 16), 0);
udelay(5000);
/* deassert PHY reset */
- mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(3, 16), 1);
+ gpio_set_value(MXC_GPIO_PORT_TO_NUM(3, 16), 1);
udelay(5000);
#endif
@@ -172,12 +165,12 @@ int board_late_init(void)
e = getenv("gs_base_board");
if (e != NULL) {
if (strcmp(e, "G283") == 0) {
- int key = mxc_gpio_get(MXC_GPIO_PORT_TO_NUM(2, 29));
+ int key = gpio_get_value(MXC_GPIO_PORT_TO_NUM(2, 29));
if (key) {
/* Switch on both LEDs to inidcate boot mode */
- mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(1, 29), 0);
- mxc_gpio_set(MXC_GPIO_PORT_TO_NUM(4, 21), 0);
+ gpio_set_value(MXC_GPIO_PORT_TO_NUM(1, 29), 0);
+ gpio_set_value(MXC_GPIO_PORT_TO_NUM(4, 21), 0);
setenv("preboot", "run gs_slow_boot");
} else
diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c
index d007044..cd5683d 100644
--- a/board/ti/am3517crane/am3517crane.c
+++ b/board/ti/am3517crane/am3517crane.c
@@ -24,6 +24,7 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
@@ -73,3 +74,11 @@ void set_muxconf_regs(void)
{
MUX_AM3517CRANE();
}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index ab50514..e07f1b8 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -50,6 +50,7 @@ extern struct ehci_hccr *hccr;
extern volatile struct ehci_hcor *hcor;
#endif
#include "beagle.h"
+#include <command.h>
#define pr_debug(fmt, args...) debug(fmt, ##args)
@@ -164,6 +165,28 @@ unsigned int get_expansion_id(void)
}
/*
+ * Configure DSS to display background color on DVID
+ * Configure VENC to display color bar on S-Video
+ */
+void beagle_display_init(void)
+{
+ omap3_dss_venc_config(&venc_config_std_tv, VENC_HEIGHT, VENC_WIDTH);
+ switch (get_board_revision()) {
+ case REVISION_AXBX:
+ case REVISION_CX:
+ case REVISION_C4:
+ omap3_dss_panel_config(&dvid_cfg);
+ break;
+ case REVISION_XM_A:
+ case REVISION_XM_B:
+ case REVISION_XM_C:
+ default:
+ omap3_dss_panel_config(&dvid_cfg_xm);
+ break;
+ }
+}
+
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
*/
@@ -216,6 +239,16 @@ int misc_init_r(void)
TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
TWL4030_PM_RECEIVER_DEV_GRP_P1);
break;
+ case REVISION_XM_C:
+ printf("Beagle xM Rev C\n");
+ setenv("beaglerev", "xMC");
+ MUX_BEAGLE_XM();
+ /* Set VAUX2 to 1.8V for EHCI PHY */
+ twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED,
+ TWL4030_PM_RECEIVER_VAUX2_VSEL_18,
+ TWL4030_PM_RECEIVER_VAUX2_DEV_GRP,
+ TWL4030_PM_RECEIVER_DEV_GRP_P1);
+ break;
default:
printf("Beagle unknown 0x%02x\n", get_board_revision());
MUX_BEAGLE_XM();
@@ -299,20 +332,30 @@ int misc_init_r(void)
setenv(expansion_config.env_var, expansion_config.env_setting);
twl4030_power_init();
- twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
-
- /* Configure GPIOs to output */
- writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
- writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
- GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
+ switch (get_board_revision()) {
+ case REVISION_XM_A:
+ case REVISION_XM_B:
+ twl4030_led_init(TWL4030_LED_LEDEN_LEDBON);
+ break;
+ default:
+ twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
+ break;
+ }
- /* Set GPIOs */
+ /* Set GPIO states before they are made outputs */
writel(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1,
&gpio6_base->setdataout);
writel(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
GPIO15 | GPIO14 | GPIO13 | GPIO12, &gpio5_base->setdataout);
+ /* Configure GPIOs to output */
+ writel(~(GPIO23 | GPIO10 | GPIO8 | GPIO2 | GPIO1), &gpio6_base->oe);
+ writel(~(GPIO31 | GPIO30 | GPIO29 | GPIO28 | GPIO22 | GPIO21 |
+ GPIO15 | GPIO14 | GPIO13 | GPIO12), &gpio5_base->oe);
+
dieid_num_r();
+ beagle_display_init();
+ omap3_dss_enable();
return 0;
}
@@ -346,6 +389,12 @@ int ehci_hcd_stop(void)
pr_debug("Resetting OMAP3 EHCI\n");
omap_set_gpio_dataout(GPIO_PHY_RESET, 0);
writel(OMAP_UHH_SYSCONFIG_SOFTRESET, OMAP3_UHH_BASE + OMAP_UHH_SYSCONFIG);
+ /* disable USB clocks */
+ struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+ sr32(&prcm_base->iclken_usbhost, 0, 1, 0);
+ sr32(&prcm_base->fclken_usbhost, 0, 2, 0);
+ sr32(&prcm_base->iclken3_core, 2, 1, 0);
+ sr32(&prcm_base->fclken3_core, 2, 1, 0);
return 0;
}
@@ -430,3 +479,58 @@ int ehci_hcd_init(void)
}
#endif /* CONFIG_USB_EHCI */
+
+/*
+ * This command returns the status of the user button on beagle xM
+ * Input - none
+ * Returns - 1 if button is held down
+ * 0 if button is not held down
+ */
+int do_userbutton (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+{
+ int button = 0;
+ int gpio;
+
+ /*
+ * pass address parameter as argv[0] (aka command name),
+ * and all remaining args
+ */
+ switch (get_board_revision()) {
+ case REVISION_AXBX:
+ case REVISION_CX:
+ case REVISION_C4:
+ gpio = 7;
+ break;
+ case REVISION_XM_A:
+ case REVISION_XM_B:
+ case REVISION_XM_C:
+ default:
+ gpio = 4;
+ break;
+ }
+ omap_request_gpio(gpio);
+ omap_set_gpio_direction(gpio, 1);
+ printf("The user button is currently ");
+ if(omap_get_gpio_datain(gpio))
+ {
+ button = 1;
+ printf("PRESSED.\n");
+ }
+ else
+ {
+ button = 0;
+ printf("NOT pressed.\n");
+ }
+
+ omap_free_gpio(gpio);
+
+ return !button;
+}
+
+/* -------------------------------------------------------------------- */
+
+U_BOOT_CMD(
+ userbutton, CONFIG_SYS_MAXARGS, 1, do_userbutton,
+ "Return the status of the BeagleBoard USER button",
+ ""
+);
diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h
index a7401b1..18bfaa8 100644
--- a/board/ti/beagle/beagle.h
+++ b/board/ti/beagle/beagle.h
@@ -23,6 +23,8 @@
#ifndef _BEAGLE_H_
#define _BEAGLE_H_
+#include <asm/arch/dss.h>
+
const omap3_sysinfo sysinfo = {
DDR_STACKED,
"OMAP3 Beagle board",
@@ -39,6 +41,7 @@ const omap3_sysinfo sysinfo = {
#define REVISION_C4 0x5
#define REVISION_XM_A 0x0
#define REVISION_XM_B 0x1
+#define REVISION_XM_C 0x2
/*
* IEN - Input Enable
@@ -471,4 +474,88 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) /*GPIO_138 BT_EN*/\
MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) /*GPIO_139 WLAN_EN*/
+/*
+ * Display Configuration
+ */
+
+#define DVI_BEAGLE_ORANGE_COL 0x00FF8000
+#define VENC_HEIGHT 0x00ef
+#define VENC_WIDTH 0x027f
+
+/*
+ * Configure VENC in DSS for Beagle to generate Color Bar
+ *
+ * Kindly refer to OMAP TRM for definition of these values.
+ */
+static const struct venc_regs venc_config_std_tv = {
+ .status = 0x0000001B,
+ .f_control = 0x00000040,
+ .vidout_ctrl = 0x00000000,
+ .sync_ctrl = 0x00008000,
+ .llen = 0x00008359,
+ .flens = 0x0000020C,
+ .hfltr_ctrl = 0x00000000,
+ .cc_carr_wss_carr = 0x043F2631,
+ .c_phase = 0x00000024,
+ .gain_u = 0x00000130,
+ .gain_v = 0x00000198,
+ .gain_y = 0x000001C0,
+ .black_level = 0x0000006A,
+ .blank_level = 0x0000005C,
+ .x_color = 0x00000000,
+ .m_control = 0x00000001,
+ .bstamp_wss_data = 0x0000003F,
+ .s_carr = 0x21F07C1F,
+ .line21 = 0x00000000,
+ .ln_sel = 0x00000015,
+ .l21__wc_ctl = 0x00001400,
+ .htrigger_vtrigger = 0x00000000,
+ .savid__eavid = 0x069300F4,
+ .flen__fal = 0x0016020C,
+ .lal__phase_reset = 0x00060107,
+ .hs_int_start_stop_x = 0x008D034E,
+ .hs_ext_start_stop_x = 0x000F0359,
+ .vs_int_start_x = 0x01A00000,
+ .vs_int_stop_x__vs_int_start_y = 0x020501A0,
+ .vs_int_stop_y__vs_ext_start_x = 0x01AC0024,
+ .vs_ext_stop_x__vs_ext_start_y = 0x020D01AC,
+ .vs_ext_stop_y = 0x00000006,
+ .avid_start_stop_x = 0x03480079,
+ .avid_start_stop_y = 0x02040024,
+ .fid_int_start_x__fid_int_start_y = 0x0001008A,
+ .fid_int_offset_y__fid_ext_start_x = 0x01AC0106,
+ .fid_ext_start_y__fid_ext_offset_y = 0x01060006,
+ .tvdetgp_int_start_stop_x = 0x00140001,
+ .tvdetgp_int_start_stop_y = 0x00010001,
+ .gen_ctrl = 0x00FF0000,
+ .output_control = 0x0000000D,
+ .dac_b__dac_c = 0x00000000
+};
+
+/*
+ * Configure Timings for DVI D
+ */
+static const struct panel_config dvid_cfg = {
+ .timing_h = 0x0ff03f31, /* Horizantal timing */
+ .timing_v = 0x01400504, /* Vertical timing */
+ .pol_freq = 0x00007028, /* Pol Freq */
+ .divisor = 0x00010006, /* 72Mhz Pixel Clock */
+ .lcd_size = 0x02ff03ff, /* 1024x768 */
+ .panel_type = 0x01, /* TFT */
+ .data_lines = 0x03, /* 24 Bit RGB */
+ .load_mode = 0x02, /* Frame Mode */
+ .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */
+};
+
+static const struct panel_config dvid_cfg_xm = {
+ .timing_h = 0x1a4024c9, /* Horizantal timing */
+ .timing_v = 0x02c00509, /* Vertical timing */
+ .pol_freq = 0x00007028, /* Pol Freq */
+ .divisor = 0x00010001, /* 96MHz Pixel Clock */
+ .lcd_size = 0x02ff03ff, /* 1024x768 */
+ .panel_type = 0x01, /* TFT */
+ .data_lines = 0x03, /* 24 Bit RGB */
+ .load_mode = 0x02, /* Frame Mode */
+ .panel_color = DVI_BEAGLE_ORANGE_COL /* ORANGE */
+};
#endif
diff --git a/board/ti/beagle/led.c b/board/ti/beagle/led.c
index 08f95a0..f08c08a 100644
--- a/board/ti/beagle/led.c
+++ b/board/ti/beagle/led.c
@@ -24,11 +24,9 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/gpio.h>
-static unsigned int saved_state[2] = {STATUS_LED_OFF, STATUS_LED_OFF};
-
/* GPIO pins for the LEDs */
-#define BEAGLE_LED_USR0 149
-#define BEAGLE_LED_USR1 150
+#define BEAGLE_LED_USR0 150
+#define BEAGLE_LED_USR1 149
#ifdef STATUS_LED_GREEN
void green_LED_off (void)
@@ -49,22 +47,22 @@ void __led_init (led_id_t mask, int state)
void __led_toggle (led_id_t mask)
{
+ int state, toggle_gpio = 0;
#ifdef STATUS_LED_BIT
- if (STATUS_LED_BIT & mask) {
- if (STATUS_LED_ON == saved_state[0])
- __led_set(STATUS_LED_BIT, 0);
- else
- __led_set(STATUS_LED_BIT, 1);
- }
+ if (!toggle_gpio && STATUS_LED_BIT & mask)
+ toggle_gpio = BEAGLE_LED_USR0;
#endif
#ifdef STATUS_LED_BIT1
- if (STATUS_LED_BIT1 & mask) {
- if (STATUS_LED_ON == saved_state[1])
- __led_set(STATUS_LED_BIT1, 0);
- else
- __led_set(STATUS_LED_BIT1, 1);
- }
+ if (!toggle_gpio && STATUS_LED_BIT1 & mask)
+ toggle_gpio = BEAGLE_LED_USR1;
#endif
+ if (toggle_gpio) {
+ if (!omap_request_gpio(toggle_gpio)) {
+ omap_set_gpio_direction(toggle_gpio, 0);
+ state = omap_get_gpio_dataout(toggle_gpio);
+ omap_set_gpio_dataout(toggle_gpio, !state);
+ }
+ }
}
void __led_set (led_id_t mask, int state)
@@ -75,7 +73,6 @@ void __led_set (led_id_t mask, int state)
omap_set_gpio_direction(BEAGLE_LED_USR0, 0);
omap_set_gpio_dataout(BEAGLE_LED_USR0, state);
}
- saved_state[0] = state;
}
#endif
#ifdef STATUS_LED_BIT1
@@ -84,7 +81,6 @@ void __led_set (led_id_t mask, int state)
omap_set_gpio_direction(BEAGLE_LED_USR1, 0);
omap_set_gpio_dataout(BEAGLE_LED_USR1, state);
}
- saved_state[1] = state;
}
#endif
}
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 30c1c57..e8360df 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -33,6 +33,7 @@
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/gpio.h>
#include <i2c.h>
#include <asm/mach-types.h>
@@ -221,3 +222,11 @@ int board_eth_init(bd_t *bis)
return rc;
}
#endif /* CONFIG_CMD_NET */
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
diff --git a/board/ti/omap1610inn/omap1610innovator.c b/board/ti/omap1610inn/omap1610innovator.c
index 44818bb..16e8237 100644
--- a/board/ti/omap1610inn/omap1610innovator.c
+++ b/board/ti/omap1610inn/omap1610innovator.c
@@ -63,13 +63,6 @@ static inline void delay (unsigned long loops)
int board_init (void)
{
- if (machine_is_omap_h2())
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_H2;
- else if (machine_is_omap_innovator())
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR;
- else
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_GENERIC;
-
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x10000100;
diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c
index 72f0984..d73f501 100644
--- a/board/ti/sdp3430/sdp.c
+++ b/board/ti/sdp3430/sdp.c
@@ -25,6 +25,7 @@
#include <netdev.h>
#include <twl4030.h>
#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
@@ -204,3 +205,11 @@ void set_muxconf_regs(void)
/* platform specific muxes */
MUX_SDP3430();
}
+
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index 95afaaa..533af5a 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -35,6 +35,7 @@
#include <common.h>
#include <twl4030.h>
#include <asm/io.h>
+#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mem.h>
@@ -119,6 +120,14 @@ void set_muxconf_regs(void)
MUX_DEVKIT8000();
}
+#ifdef CONFIG_GENERIC_MMC
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ return 0;
+}
+#endif
+
#ifdef CONFIG_DRIVER_DM9000
/*
* Routine: board_eth_init
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index 565c4d0..17a2558 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -29,7 +29,7 @@
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/iomux.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
#include <asm/arch/sys_proto.h>
#include <asm/errno.h>
#include <i2c.h>
@@ -69,9 +69,9 @@ void hw_watchdog_reset(void)
int val;
/* toggle watchdog trigger pin */
- val = mxc_gpio_get(66);
+ val = gpio_get_value(66);
val = val ? 0 : 1;
- mxc_gpio_set(66, val);
+ gpio_set_value(66, val);
}
#endif
@@ -233,30 +233,22 @@ static void reset_peripherals(int reset)
if (reset) {
/* reset_n is on NANDF_D15 */
- mxc_gpio_set(89, 0);
- mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(89, 0);
#ifdef CONFIG_VISION2_HW_1_0
/*
* set FEC Configuration lines
* set levels of FEC config lines
*/
- mxc_gpio_set(75, 0);
- mxc_gpio_set(74, 1);
- mxc_gpio_set(95, 1);
- mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(75, 0);
+ gpio_direction_output(74, 1);
+ gpio_direction_output(95, 1);
/* set direction of FEC config lines */
- mxc_gpio_set(59, 0);
- mxc_gpio_set(60, 0);
- mxc_gpio_set(61, 0);
- mxc_gpio_set(55, 1);
- mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT);
- mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(59, 0);
+ gpio_direction_output(60, 0);
+ gpio_direction_output(61, 0);
+ gpio_direction_output(55, 1);
/* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */
mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
@@ -283,7 +275,7 @@ static void reset_peripherals(int reset)
PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX);
} else {
/* set FEC Control lines */
- mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN);
+ gpio_direction_input(89);
udelay(500);
#ifdef CONFIG_VISION2_HW_1_0
@@ -438,31 +430,23 @@ static void setup_gpios(void)
* Set GPIO1_4 to high and output; it is used to reset
* the system on reboot
*/
- mxc_gpio_set(4, 1);
- mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(4, 1);
- mxc_gpio_set(7, 0);
- mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(7, 0);
for (i = 65; i < 71; i++) {
- mxc_gpio_set(i, 0);
- mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(i, 0);
}
- mxc_gpio_set(94, 0);
- mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(94, 0);
/* Set POWER_OFF high */
- mxc_gpio_set(91, 1);
- mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(91, 1);
- mxc_gpio_set(90, 0);
- mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(90, 0);
- mxc_gpio_set(122, 0);
- mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(122, 0);
- mxc_gpio_set(121, 1);
- mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(121, 1);
WATCHDOG_RESET();
}
@@ -551,7 +535,7 @@ int get_mmc_getcd(u8 *cd, struct mmc *mmc)
struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
- *cd = mxc_gpio_get(0);
+ *cd = gpio_get_value(0);
else
*cd = 0;
@@ -623,8 +607,7 @@ int board_early_init_f(void)
init_drive_strength();
/* Setup debug led */
- mxc_gpio_set(6, 0);
- mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT);
+ gpio_direction_output(6, 0);
mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
@@ -644,12 +627,12 @@ int board_early_init_f(void)
static void backlight(int on)
{
if (on) {
- mxc_gpio_set(65, 1);
+ gpio_set_value(65, 1);
udelay(10000);
- mxc_gpio_set(68, 1);
+ gpio_set_value(68, 1);
} else {
- mxc_gpio_set(65, 0);
- mxc_gpio_set(68, 0);
+ gpio_set_value(65, 0);
+ gpio_set_value(68, 0);
}
}
@@ -660,7 +643,7 @@ void lcd_enable(void)
mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0);
mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0);
- mxc_gpio_set(2, 1);
+ gpio_set_value(2, 1);
mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
ret = mx51_fb_init(&nec_nl6448bc26_09c);
diff --git a/board/voiceblue/Makefile b/board/voiceblue/Makefile
deleted file mode 100644
index e16b195..0000000
--- a/board/voiceblue/Makefile
+++ /dev/null
@@ -1,74 +0,0 @@
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de
-#
-# (C) Copyright 2005
-# Ladislav Michl, 2N Telekomunikace, michl@2n.cz
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS := voiceblue.o
-SOBJS := setup.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-LOAD_ADDR = 0x10400000
-
-#########################################################################
-
-all: $(obj).depend $(LIB) $(obj)eeprom.srec $(obj)eeprom.bin
-
-$(LIB): $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $^)
-
-$(obj)eeprom_start.o:
- echo "b eeprom" | $(CC) $(AFLAGS) -c -x assembler -o $@ -
-
-$(obj)eeprom: $(obj)eeprom_start.o $(obj)eeprom.o
- $(LD) -Ttext $(LOAD_ADDR) -e eeprom -o $@ $^ \
- -L$(obj)../../examples/standalone -lstubs \
- $(PLATFORM_LIBS)
-
-$(obj)eeprom.srec: $(obj)eeprom
- $(OBJCOPY) -S -O srec $(<:.o=) $@
-
-$(obj)eeprom.bin: $(obj)eeprom
- $(OBJCOPY) -S -O binary $< $@
-
-clean:
- rm -f $(SOBJS) $(OBJS) $(obj)eeprom \
- $(obj)eeprom.srec $(obj)eeprom.bin \
- $(obj)eeprom.o $(obj)eeprom_start.o
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/voiceblue/config.mk b/board/voiceblue/config.mk
deleted file mode 100644
index 412b57d..0000000
--- a/board/voiceblue/config.mk
+++ /dev/null
@@ -1 +0,0 @@
-CONFIG_SYS_TEXT_BASE = 0x13FD0000
diff --git a/board/voiceblue/eeprom.c b/board/voiceblue/eeprom.c
deleted file mode 100644
index aa6baca..0000000
--- a/board/voiceblue/eeprom.c
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2005
- * Ladislav Michl, 2N Telekomunikace, michl@2n.cz
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Some code shamelessly stolen back from Robin Getz.
- */
-
-#include <common.h>
-#include <exports.h>
-#include <timestamp.h>
-#include <net.h>
-#include "../drivers/net/smc91111.h"
-
-static struct eth_device dev = {
- .iobase = CONFIG_SMC91111_BASE
-};
-
-static u16 read_eeprom_reg(u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_RELOAD, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_RELOAD) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout reading register %02x\n", reg);
- return 0;
- }
-
- return SMC_inw(&dev, GP_REG);
-}
-
-static int write_eeprom_reg(u16 value, u16 reg)
-{
- int timeout;
-
- SMC_SELECT_BANK(&dev, 2);
- SMC_outw(&dev, reg, PTR_REG);
-
- SMC_SELECT_BANK(&dev, 1);
-
- SMC_outw(&dev, value, GP_REG);
- SMC_outw(&dev, SMC_inw(&dev, CTL_REG) | CTL_EEPROM_SELECT |
- CTL_STORE, CTL_REG);
-
- timeout = 100;
-
- while ((SMC_inw(&dev, CTL_REG) & CTL_STORE) && --timeout)
- udelay(100);
- if (timeout == 0) {
- printf("Timeout writing register %02x\n", reg);
- return 0;
- }
-
- return 1;
-}
-
-static int write_data(u16 *buf, int len)
-{
- u16 reg = 0x23;
-
- while (len--)
- write_eeprom_reg(*buf++, reg++);
-
- return 0;
-}
-
-static int verify_macaddr(char *s)
-{
- u16 reg;
- int i, err = 0;
-
- puts("HWaddr: ");
- for (i = 0; i < 3; i++) {
- reg = read_eeprom_reg(0x20 + i);
- printf("%02x:%02x%c", reg & 0xff, reg >> 8, i != 2 ? ':' : '\n');
- if (s)
- err |= reg != ((u16 *)s)[i];
- }
-
- return err ? 0 : 1;
-}
-
-static int set_mac(char *s)
-{
- int i;
- char *e, eaddr[6];
-
- /* turn string into mac value */
- for (i = 0; i < 6; i++) {
- eaddr[i] = simple_strtoul(s, &e, 16);
- s = (*e) ? e+1 : e;
- }
-
- for (i = 0; i < 3; i++)
- write_eeprom_reg(*(((u16 *)eaddr) + i), 0x20 + i);
-
- return 0;
-}
-
-static int parse_element(char *s, unsigned char *buf, int len)
-{
- int cnt;
- char *p, num[3];
- unsigned char id;
-
- id = simple_strtoul(s, &p, 16);
- if (*p++ != ':')
- return -1;
- cnt = 2;
- num[2] = 0;
- for (; *p; p += 2) {
- if (p[1] == 0)
- return -2;
- if (cnt + 3 > len)
- return -3;
- num[0] = p[0];
- num[1] = p[1];
- buf[cnt++] = simple_strtoul(num, NULL, 16);
- }
- buf[0] = id;
- buf[1] = cnt - 2;
-
- return cnt;
-}
-
-int eeprom(int argc, char * const argv[])
-{
- int i, len, ret;
- unsigned char buf[58], *p;
-
- app_startup(argv);
- i = get_version();
- if (i != XF_VERSION) {
- printf("Using ABI version %d, but U-Boot provides %d\n",
- XF_VERSION, i);
- return 1;
- }
-
- if ((SMC_inw(&dev, BANK_SELECT) & 0xFF00) != 0x3300) {
- puts("SMSC91111 not found\n");
- return 2;
- }
-
- /* Called without parameters - print MAC address */
- if (argc < 2) {
- verify_macaddr(NULL);
- return 0;
- }
-
- /* Print help message */
- if (argv[1][1] == 'h') {
- puts("VoiceBlue EEPROM writer\n"
- "Built: " U_BOOT_DATE " at " U_BOOT_TIME "\n"
- "Usage:\n\t<mac_address> [<element_1>] [<...>]\n");
- return 0;
- }
-
- /* Try to parse information elements */
- len = sizeof(buf);
- p = buf;
- for (i = 2; i < argc; i++) {
- ret = parse_element(argv[i], p, len);
- switch (ret) {
- case -1:
- printf("Element %d: malformed\n", i - 1);
- return 3;
- case -2:
- printf("Element %d: odd character count\n", i - 1);
- return 3;
- case -3:
- puts("Out of EEPROM memory\n");
- return 3;
- default:
- p += ret;
- len -= ret;
- }
- }
-
- /* First argument (MAC) is mandatory */
- set_mac(argv[1]);
- if (verify_macaddr(argv[1])) {
- puts("*** HWaddr does not match! ***\n");
- return 4;
- }
-
- while (len--)
- *p++ = 0;
-
- write_data((u16 *)buf, sizeof(buf) >> 1);
-
- return 0;
-}
diff --git a/board/voiceblue/setup.S b/board/voiceblue/setup.S
deleted file mode 100644
index 6dddd6b..0000000
--- a/board/voiceblue/setup.S
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
- * (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */
-
-OMAP5910_LPG1_BASE: .word 0xfffbd000
-OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
-OMAP5910_MPU_TC_BASE: .word 0xfffecc00
-OMAP5910_MPU_CLKM_BASE: .word 0xfffece00
-OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800
-OMAP5910_DPLL1_BASE: .word 0xfffecf00
-OMAP5910_GPIO_BASE: .word 0xfffce000
-OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800
-OMAP5910_MPUI_BASE: .word 0xfffec900
-
-_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL
-_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK
-
-OMAP5910_MPUI_CTRL: .word 0x0000ff1b
-
-VAL_EMIFS_CS0_CONFIG: .word 0x00009090
-VAL_EMIFS_CS1_CONFIG: .word 0x00003031
-VAL_EMIFS_CS2_CONFIG: .word 0x00003031
-VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0
-VAL_EMIFS_DYN_WAIT: .word 0x00000000
-/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
- /* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */
-VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
-VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003
-VAL_EMIFF_MRS: .word 0x00000037
-
-/*
- * GPIO04 - D4 (Onboard LED)
- * GPIO07 - LAN91C111 reset
- */
-GPIO_DIRECTION:
- .word 0x0000ff6f
-/*
- * Disable everything, but D4 LED (connected through invertor)
- */
-GPIO_OUTPUT:
- .word 0x00000010
-
-MUX_CONFIG_BASE:
- .word 0xfffe1000
-
-MUX_CONFIG_VALUES:
- .align 4
- .word 0x00000000 @ FUNC_MUX_CTRL_0
- .word 0x00000000 @ FUNC_MUX_CTRL_1
- .word 0x00000000 @ FUNC_MUX_CTRL_2
- .word 0x00000000 @ FUNC_MUX_CTRL_3
- .word 0x00000000 @ FUNC_MUX_CTRL_4
- .word 0x12082480 @ FUNC_MUX_CTRL_5
- .word 0x0000001c @ FUNC_MUX_CTRL_6
- .word 0x00000003 @ FUNC_MUX_CTRL_7
- .word 0x10001200 @ FUNC_MUX_CTRL_8
- .word 0x01201012 @ FUNC_MUX_CTRL_9
- .word 0x02081248 @ FUNC_MUX_CTRL_A
- .word 0x00001248 @ FUNC_MUX_CTRL_B
- .word 0x12240000 @ FUNC_MUX_CTRL_C
- .word 0x00002000 @ FUNC_MUX_CTRL_D
- .word 0x00000000 @ PULL_DWN_CTRL_0
- .word 0x0000085f @ PULL_DWN_CTRL_1
- .word 0x01001000 @ PULL_DWN_CTRL_2
- .word 0x00000000 @ PULL_DWN_CTRL_3
- .word 0x00000000 @ GATE_INH_CTRL_0
- .word 0x00000000 @ VOLTAGE_CTRL_0
- .word 0x00000000 @ TEST_DBG_CTRL_0
- .word 0x00000006 @ MOD_CONF_CTRL_0
- .word 0x0000eaef @ COMP_MODE_CTRL_0
-
-MUX_CONFIG_OFFSETS:
- .align 1
- .byte 0x00 @ FUNC_MUX_CTRL_0
- .byte 0x04 @ FUNC_MUX_CTRL_1
- .byte 0x08 @ FUNC_MUX_CTRL_2
- .byte 0x10 @ FUNC_MUX_CTRL_3
- .byte 0x14 @ FUNC_MUX_CTRL_4
- .byte 0x18 @ FUNC_MUX_CTRL_5
- .byte 0x1c @ FUNC_MUX_CTRL_6
- .byte 0x20 @ FUNC_MUX_CTRL_7
- .byte 0x24 @ FUNC_MUX_CTRL_8
- .byte 0x28 @ FUNC_MUX_CTRL_9
- .byte 0x2c @ FUNC_MUX_CTRL_A
- .byte 0x30 @ FUNC_MUX_CTRL_B
- .byte 0x34 @ FUNC_MUX_CTRL_C
- .byte 0x38 @ FUNC_MUX_CTRL_D
- .byte 0x40 @ PULL_DWN_CTRL_0
- .byte 0x44 @ PULL_DWN_CTRL_1
- .byte 0x48 @ PULL_DWN_CTRL_2
- .byte 0x4c @ PULL_DWN_CTRL_3
- .byte 0x50 @ GATE_INH_CTRL_0
- .byte 0x60 @ VOLTAGE_CTRL_0
- .byte 0x70 @ TEST_DBG_CTRL_0
- .byte 0x80 @ MOD_CONF_CTRL_0
- .byte 0x0c @ COMP_MODE_CTRL_0
- .byte 0xff
-
-.globl lowlevel_init
-lowlevel_init:
- /* Improve performance a bit... */
- mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
- mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
- mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
- orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
- mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
- mov r1, #0x00
- mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
- nop
- nop
- nop
- nop
-
- /* Setup clocking mode */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ prepare base of CLOCK unit
- ldrh r1, [r0, #0x18] @ get reset status
- bic r1, r1, #(7 << 11) @ clear clock select
- orr r1, r1, #(2 << 11) @ set synchronous scalable
- mov r2, #0 @ set wait counter to 100 clock cycles
-
-icache_loop:
- cmp r2, #0x01
- streqh r1, [r0, #0x18]
- add r2, r2, #0x01
- cmp r2, #0x10
- bne icache_loop
- nop
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- ldr r1, _OMAP5910_ARM_CKCTL
- orr r1, r1, #0x2000 @ enable DSP clock
- strh r1, [r0, #0x00] @ setup clock divisors
-
- /* Setup DPLL to generate requested freq */
- ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
- orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
- strh r1, [r0] @ write
-
-locking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #0x01
- beq locking @ while LOCK not set
-
- /* Enable clock */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
- mov r1, #(1 << 10) @ disable idle mode do not check
- @ nWAKEUP pin, other remain active
- strh r1, [r0, #0x04]
- ldr r1, _OMAP5910_ARM_EN_CLK
- strh r1, [r0, #0x08]
- mov r1, #0x003f @ FLASH.RP not enabled in idle and
- @ max delayed ( 32 x CLKIN )
- strh r1, [r0, #0x0c]
-
- /* Configure 5910 pins functions to match our board. */
- ldr r0, MUX_CONFIG_BASE
- adr r1, MUX_CONFIG_VALUES
- adr r2, MUX_CONFIG_OFFSETS
-next_mux_cfg:
- ldrb r3, [r2], #1
- ldr r4, [r1], #4
- cmp r3, #0xff
- strne r4, [r0, r3]
- bne next_mux_cfg
-
- /* Configure GPIO pins (also enables onboard LED) */
- ldr r0, OMAP5910_GPIO_BASE
- ldr r1, GPIO_OUTPUT
- strh r1, [r0, #0x04]
- ldr r1, GPIO_DIRECTION
- strh r1, [r0, #0x08]
-
- /* EnablePeripherals */
- ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit
- mov r1, #0x0001 @ Peripheral enable
- strh r1, [r0, #0x14]
-
- /* Program LED Pulse Generator */
- ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator
- mov r1, #0x7F @ Set obscure frequency in
- strb r1, [r0, #0x00] @ LCR
- mov r1, #0x01 @ Enable clock (CLK_EN) in
- strb r1, [r0, #0x04] @ PMR
-
- /* TIPB Lock UART1 */
- ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches
- mov r1, #1 @ ARM allocated
- strh r1, [r0,#0x04] @ clear IRQ line and status bits
- strh r1, [r0,#0x00]
- ldrh r1, [r0,#0x04]
-
- /* Disable watchdog */
- ldr r0, OMAP5910_MPU_WD_TIMER_BASE
- mov r1, #0xf5
- strh r1, [r0, #0x8]
- mov r1, #0xa0
- strh r1, [r0, #0x8]
-
- /* Enable MCLK */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE
- mov r1, #0x6
- strh r1, [r0, #0x34]
- strh r1, [r0, #0x34]
-
- /* Setup clock divisors */
- ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register
-
- mov r1, #0x0010 @ set PLL_ENABLE
- orr r1, r1, #0x2000 @ set IOB to new locking
- strh r1, [r0] @ write
-
-ulocking:
- ldrh r1, [r0] @ get DPLL value
- tst r1, #1
- beq ulocking @ while LOCK not set
-
- /* EMIF init */
- ldr r0, OMAP5910_MPU_TC_BASE
- ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG
- bic r1, r1, #0x0c @ pwr down disabled, flash WP
- orr r1, r1, #0x01
- str r1, [r0, #0x0c]
-
- ldr r1, VAL_EMIFS_CS0_CONFIG
- str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG
- ldr r1, VAL_EMIFS_CS1_CONFIG
- str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG
- ldr r1, VAL_EMIFS_CS2_CONFIG
- str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG
- ldr r1, VAL_EMIFS_CS3_CONFIG
- str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG
- ldr r1, VAL_EMIFS_DYN_WAIT
- str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT
-
- /* Setup SDRAM */
- ldr r1, VAL_EMIFF_SDRAM_CONFIG
- str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG
- ldr r1, VAL_EMIFF_SDRAM_CONFIG2
- str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2
- ldr r1, VAL_EMIFF_MRS
- str r1, [r0, #0x24] @ EMIFF_MRS
- /* SDRAM needs 100us to stabilize */
- mov r0, #0x4000
-sdelay:
- subs r0, r0, #0x1
- bne sdelay
-
- /* back to arch calling code */
- mov pc, lr
-.end
diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c
deleted file mode 100644
index 5f8af2b..0000000
--- a/board/voiceblue/voiceblue.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_init(void)
-{
- *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa;
-
- /* arch number of VoiceBlue board */
- gd->bd->bi_arch_number = MACH_TYPE_VOICEBLUE;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
- return 0;
-}
-
-int dram_init(void)
-{
- *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff;
-
- /* Take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete. */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) |= 0x80;
- udelay(10); /* doesn't work before timer_init call */
- *((volatile unsigned short *) GPIO_DATA_OUTPUT_REG) &= ~0x80;
- udelay(500);
-
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-int misc_init_r(void)
-{
- *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0x55;
-
- return 0;
-}
-
-int board_late_init(void)
-{
- *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0x00;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/boards.cfg b/boards.cfg
index c253f03..734ea8e 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -35,49 +35,43 @@
# Target ARCH CPU Board name Vendor SoC Options
###########################################################################################################
+integratorcp_cm1136 arm arm1136 integrator armltd - integratorcp
qong arm arm1136 - davedenx mx31
mx31ads arm arm1136 - freescale mx31
imx31_litekit arm arm1136 - logicpd mx31
mx35pdk arm arm1136 - freescale mx35
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
-armadillo arm arm720t
ep7312 arm arm720t
impa7 arm arm720t
modnet50 arm arm720t
+integratorap_cm720t arm arm720t integrator armltd - integratorap
lpc2292sodimm arm arm720t - - lpc2292
SMN42 arm arm720t - siemens lpc2292
evb4510 arm arm720t - - s3c4510b
+integratorap_cm920t arm arm920t integrator armltd - integratorap
+integratorcp_cm920t arm arm920t integrator armltd - integratorcp
a320evb arm arm920t - faraday a320
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
eb_cpux9k2 arm arm920t - BuS at91
cpuat91 arm arm920t cpuat91 eukrea at91 cpuat91
cpuat91_ram arm arm920t cpuat91 eukrea at91 cpuat91:RAMBOOT
-cmc_pu2 arm arm920t - - at91rm9200
-csb637 arm arm920t - - at91rm9200
-kb9202 arm arm920t - - at91rm9200
-m501sk arm arm920t - - at91rm9200
-at91rm9200dk arm arm920t - atmel at91rm9200
mx1ads arm arm920t - - imx
-mx1fs2 arm arm920t - - imx
scb9328 arm arm920t - - imx
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
-sbc2410x arm arm920t - - s3c24x0
VCMA9 arm arm920t vcma9 mpl s3c24x0
-smdk2400 arm arm920t - samsung s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
-netstar arm arm925t
-voiceblue arm arm925t
omap1510inn arm arm925t - ti
-versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU
+integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap
+integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp
+versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB
versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB
versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB
aspenite arm arm926ejs - Marvell armada100
gplugd arm arm926ejs - Marvell armada100
afeb9260 arm arm926ejs - - at91
-at91cap9adk arm arm926ejs - atmel at91
at91sam9260ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_NANDFLASH
at91sam9260ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS0
at91sam9260ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9260,SYS_USE_DATAFLASH_CS1
@@ -95,6 +89,7 @@ at91sam9g10ek_dataflash_cs3 arm arm926ejs at91sam9261ek atmel
at91sam9g20ek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_NANDFLASH
at91sam9g20ek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS0
at91sam9g20ek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9G20,SYS_USE_DATAFLASH_CS1
+at91sam9m10g45ek_nandflash arm arm926ejs at91sam9m10g45ek atmel at91 at91sam9m10g45ek:AT91SAM9M10G45,SYS_USE_NANDFLASH
at91sam9rlek_nandflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_NANDFLASH
at91sam9rlek_dataflash arm arm926ejs at91sam9rlek atmel at91 at91sam9rlek:AT91SAM9RL,SYS_USE_DATAFLASH
at91sam9xeek_nandflash arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_NANDFLASH
@@ -102,6 +97,12 @@ at91sam9xeek_dataflash_cs0 arm arm926ejs at91sam9260ek atmel
at91sam9xeek_dataflash_cs1 arm arm926ejs at91sam9260ek atmel at91 at91sam9260ek:AT91SAM9XE,SYS_USE_DATAFLASH_CS1
snapper9260 arm arm926ejs - bluewater at91 snapper9260:AT91SAM9260
snapper9g20 arm arm926ejs snapper9260 bluewater at91 snapper9260:AT91SAM9G20
+sbc35_a9g20_nandflash arm arm926ejs sbc35_a9g20 calao at91 sbc35_a9g20:AT91SAM9G20,SYS_USE_NANDFLASH
+sbc35_a9g20_eeprom arm arm926ejs sbc35_a9g20 calao at91 sbc35_a9g20:AT91SAM9G20,SYS_USE_EEPROM
+tny_a9g20_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_NANDFLASH
+tny_a9g20_eeprom arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9G20,SYS_USE_EEPROM
+tny_a9260_nandflash arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9260,SYS_USE_NANDFLASH
+tny_a9260_eeprom arm arm926ejs tny_a9260 calao at91 tny_a9260:AT91SAM9260,SYS_USE_EEPROM
cpu9260 arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260
cpu9260_nand arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,NANDBOOT
cpu9260_128M arm arm926ejs cpu9260 eukrea at91 cpu9260:CPU9260,CPU9260_128M
@@ -116,8 +117,9 @@ meesc arm arm926ejs meesc esd
meesc_dataflash arm arm926ejs meesc esd at91 meesc:AT91SAM9263,SYS_USE_DATAFLASH
otc570 arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_NANDFLASH
otc570_dataflash arm arm926ejs otc570 esd at91 otc570:AT91SAM9263,SYS_USE_DATAFLASH
-pm9261 arm arm926ejs - ronetix at91
-pm9263 arm arm926ejs - ronetix at91
+pm9261 arm arm926ejs pm9261 ronetix at91 pm9261:AT91SAM9261
+pm9263 arm arm926ejs pm9263 ronetix at91 pm9263:AT91SAM9263
+pm9g45 arm arm926ejs pm9g45 ronetix at91 pm9g45:AT91SAM9G45
da830evm arm arm926ejs da8xxevm davinci davinci
da850evm arm arm926ejs da8xxevm davinci davinci
hawkboard arm arm926ejs da8xxevm davinci davinci
@@ -156,6 +158,8 @@ nhk8815_onenand arm arm926ejs nhk8815 st
omap5912osk arm arm926ejs - ti omap
edminiv2 arm arm926ejs - LaCie orion5x
dkb arm arm926ejs - Marvell pantheon
+integratorap_cm946es arm arm946es integrator armltd - integratorap
+integratorcp_cm946es arm arm946es integrator armltd - integratorcp
ca9x4_ct_vxp arm armv7 vexpress armltd
efikamx arm armv7 efikamx - mx5 efikamx:IMX_CONFIG=board/efikamx/imximage.cfg
mx51evk arm armv7 mx51evk freescale mx5 mx51evk:IMX_CONFIG=board/freescale/mx51evk/imximage.cfg
@@ -182,6 +186,7 @@ omap4_panda arm armv7 panda ti
omap4_sdp4430 arm armv7 sdp4430 ti omap4
s5p_goni arm armv7 goni samsung s5pc1xx
smdkc100 arm armv7 smdkc100 samsung s5pc1xx
+origen arm armv7 origen samsung s5pc2xx
s5pc210_universal arm armv7 universal_c210 samsung s5pc2xx
smdkv310 arm armv7 smdkv310 samsung s5pc2xx
harmony arm armv7 harmony nvidia tegra2
@@ -197,8 +202,6 @@ actux4 arm ixp
dvlhost arm ixp
ixdp425 arm ixp
ixdpg425 arm ixp ixdp425
-lpd7a400 arm lh7a40x lpd7a40x
-lpd7a404 arm lh7a40x lpd7a40x
balloon3 arm pxa
cerf250 arm pxa
colibri_pxa270 arm pxa
@@ -219,8 +222,6 @@ xaeniax arm pxa
xm250 arm pxa
zipitz2 arm pxa
zylonite arm pxa
-B2 arm s3c44b0 - dave
-assabet arm sa1100
dnp1110 arm sa1100
gcplus arm sa1100
jornada arm sa1100
diff --git a/common/Makefile b/common/Makefile
index d662468..2edbd71 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -106,6 +106,7 @@ COBJS-$(CONFIG_CMD_ITEST) += cmd_itest.o
COBJS-$(CONFIG_CMD_JFFS2) += cmd_jffs2.o
COBJS-$(CONFIG_CMD_CRAMFS) += cmd_cramfs.o
COBJS-$(CONFIG_CMD_LDRINFO) += cmd_ldrinfo.o
+COBJS-$(CONFIG_CMD_LED) += cmd_led.o
COBJS-$(CONFIG_CMD_LICENSE) += cmd_license.o
COBJS-y += cmd_load.o
COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o
diff --git a/common/cmd_led.c b/common/cmd_led.c
index c53195f..0e4ebc5 100644
--- a/common/cmd_led.c
+++ b/common/cmd_led.c
@@ -34,8 +34,9 @@
struct led_tbl_s {
char *string; /* String for use in the command */
led_id_t mask; /* Mask used for calling __led_set() */
- void (*on)(void); /* Optional fucntion for turning LED on */
- void (*off)(void); /* Optional fucntion for turning LED on */
+ void (*off)(void); /* Optional function for turning LED off */
+ void (*on)(void); /* Optional function for turning LED on */
+ void (*toggle)(void);/* Optional function for toggling LED */
};
typedef struct led_tbl_s led_tbl_t;
@@ -43,76 +44,94 @@ typedef struct led_tbl_s led_tbl_t;
static const led_tbl_t led_commands[] = {
#ifdef CONFIG_BOARD_SPECIFIC_LED
#ifdef STATUS_LED_BIT
- { "0", STATUS_LED_BIT, NULL, NULL },
+ { "0", STATUS_LED_BIT, NULL, NULL, NULL },
#endif
#ifdef STATUS_LED_BIT1
- { "1", STATUS_LED_BIT1, NULL, NULL },
+ { "1", STATUS_LED_BIT1, NULL, NULL, NULL },
#endif
#ifdef STATUS_LED_BIT2
- { "2", STATUS_LED_BIT2, NULL, NULL },
+ { "2", STATUS_LED_BIT2, NULL, NULL, NULL },
#endif
#ifdef STATUS_LED_BIT3
- { "3", STATUS_LED_BIT3, NULL, NULL },
+ { "3", STATUS_LED_BIT3, NULL, NULL, NULL },
#endif
#endif
#ifdef STATUS_LED_GREEN
- { "green", STATUS_LED_GREEN, green_LED_off, green_LED_on },
+ { "green", STATUS_LED_GREEN, green_LED_off, green_LED_on, NULL },
#endif
#ifdef STATUS_LED_YELLOW
- { "yellow", STATUS_LED_YELLOW, yellow_LED_off, yellow_LED_on },
+ { "yellow", STATUS_LED_YELLOW, yellow_LED_off, yellow_LED_on, NULL },
#endif
#ifdef STATUS_LED_RED
- { "red", STATUS_LED_RED, red_LED_off, red_LED_on },
+ { "red", STATUS_LED_RED, red_LED_off, red_LED_on, NULL },
#endif
#ifdef STATUS_LED_BLUE
- { "blue", STATUS_LED_BLUE, blue_LED_off, blue_LED_on },
+ { "blue", STATUS_LED_BLUE, blue_LED_off, blue_LED_on, NULL },
#endif
- { NULL, 0, NULL, NULL }
+ { NULL, 0, NULL, NULL, NULL }
};
-int str_onoff (char *var)
+enum led_cmd { LED_ON, LED_OFF, LED_TOGGLE };
+
+enum led_cmd get_led_cmd(char *var)
{
if (strcmp(var, "off") == 0) {
- return 0;
+ return LED_OFF;
}
if (strcmp(var, "on") == 0) {
- return 1;
+ return LED_ON;
}
+ if (strcmp(var, "toggle") == 0)
+ return LED_TOGGLE;
return -1;
}
int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- int state, i;
+ int i, match = 0;
+ enum led_cmd cmd;
/* Validate arguments */
if ((argc != 3)) {
return cmd_usage(cmdtp);
}
- state = str_onoff(argv[2]);
- if (state < 0) {
+ cmd = get_led_cmd(argv[2]);
+ if (cmd < 0) {
return cmd_usage(cmdtp);
}
for (i = 0; led_commands[i].string; i++) {
if ((strcmp("all", argv[1]) == 0) ||
(strcmp(led_commands[i].string, argv[1]) == 0)) {
- if (led_commands[i].on) {
- if (state) {
+ match = 1;
+ switch (cmd) {
+ case LED_ON:
+ if (led_commands[i].on)
led_commands[i].on();
- } else {
+ else
+ __led_set(led_commands[i].mask, 1);
+ break;
+ case LED_OFF:
+ if (led_commands[i].off)
led_commands[i].off();
- }
- } else {
- __led_set(led_commands[i].mask, state);
+ else
+ __led_set(led_commands[i].mask, 0);
+ break;
+ case LED_TOGGLE:
+ if (led_commands[i].toggle)
+ led_commands[i].toggle();
+ else
+ __led_toggle(led_commands[i].mask);
}
- break;
+ /* Need to set only 1 led if led_name wasn't 'all' */
+ if (strcmp("all", argv[1]) != 0)
+ break;
}
}
/* If we ran out of matches, print Usage */
- if (!led_commands[i].string && !(strcmp("all", argv[1]) == 0)) {
+ if (!match) {
return cmd_usage(cmdtp);
}
@@ -148,6 +167,6 @@ U_BOOT_CMD(
#ifdef STATUS_LED_BLUE
"blue|"
#endif
- "all] [on|off]\n",
- "led [led_name] [on|off] sets or clears led(s)\n"
+ "all] [on|off|toggle]\n",
+ "led [led_name] [on|off|toggle] sets or clears led(s)\n"
);
diff --git a/doc/README.arm-caches b/doc/README.arm-caches
new file mode 100644
index 0000000..cd2b458
--- /dev/null
+++ b/doc/README.arm-caches
@@ -0,0 +1,51 @@
+Disabling I-cache:
+- Set CONFIG_SYS_ICACHE_OFF
+
+Disabling D-cache:
+- Set CONFIG_SYS_DCACHE_OFF
+
+Enabling I-cache:
+- Make sure CONFIG_SYS_ICACHE_OFF is not set and call icache_enable().
+
+Enabling D-cache:
+- Make sure CONFIG_SYS_DCACHE_OFF is not set and call dcache_enable().
+
+Enabling Caches at System Startup:
+- Implement enable_caches() for your platform and enable the I-cache and
+ D-cache from this function. This function is called immediately
+ after relocation.
+
+Guidelines for Working with D-cache:
+
+Memory to Peripheral DMA:
+- Flush the buffer after the MPU writes the data and before the DMA is
+ initiated.
+
+Peripheral to Memory DMA:
+- Invalidate the buffer before starting the DMA. In case there are any dirty
+ lines from the DMA buffer in the cache, subsequent cache-line replacements
+ may corrupt the buffer in memory while the DMA is still going on. Cache-line
+ replacement can happen if the CPU tries to bring some other memory locations
+ into the cache while the DMA is going on.
+- Invalidate the buffer after the DMA is complete and before the MPU reads
+ it. This may be needed in addition to the invalidation before the DMA
+ mentioned above, because in some processors memory contents can spontaneously
+ come to the cache due to speculative memory access by the CPU. If this
+ happens with the DMA buffer while DMA is going on we have a coherency problem.
+
+Buffer Requirements:
+- Any buffer that is invalidated(that is, typically the peripheral to
+ memory DMA buffer) should be aligned to cache-line boundary both at
+ at the beginning and at the end of the buffer.
+- If the buffer is not cache-line aligned invalidation will be restricted
+ to the aligned part. That is, one cache-line at the respective boundary
+ may be left out while doing invalidation.
+
+Cleanup Before Linux:
+- cleanup_before_linux() should flush the D-cache, invalidate I-cache, and
+ disable MMU and caches.
+- The following sequence is advisable while disabling d-cache:
+ 1. disable_dcache() - flushes and disables d-cache
+ 2. invalidate_dcache_all() - invalid any entry that came to the cache
+ in the short period after the cache was flushed but before the
+ cache got disabled.
diff --git a/doc/README.imx5 b/doc/README.imx5
new file mode 100644
index 0000000..f7eab7d
--- /dev/null
+++ b/doc/README.imx5
@@ -0,0 +1,17 @@
+U-Boot for Freescale i.MX5x
+
+This file contains information for the port of U-Boot to the Freescale
+i.MX5x SoCs.
+
+1. CONFIGURATION OPTIONS/SETTINGS
+---------------------------------
+
+1.1 CONFIG_MX51_PLL_ERRATA: Workaround for i.MX51 PLL errata.
+ This option should be enabled by all boards using the i.MX51 silicon
+ version up until (including) 3.0 running at 800MHz.
+ The PLL's in the i.MX51 processor can go out of lock due to a metastable
+ condition in an analog flip-flop when used at high frequencies.
+ This workaround implements an undocumented feature in the PLL (dither
+ mode), which causes the effect of this failure to be much lower (in terms
+ of frequency deviation), avoiding system failure, or at least decreasing
+ the likelihood of system failure.
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 4cb727f..8da6db6 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,29 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+at91rm9200dk arm arm920t - 2011-07-17
+m501sk arm arm920t - 2011-07-17
+kb9202 arm arm920t - 2011-07-17
+csb637 arm arm920t - 2011-07-17
+cmc_pu2 arm arm920t - 2011-07-17
+at91cap9adk arm arm926ejs - 2011-07-17 Stelian Pop <stelian.pop@leadtechdesign.com>
+voiceblue arm arm925t - 2011-07-17
+smdk2400 arm arm920t - 2011-07-17 Gary Jennejohn <garyj@denx.de>
+sbc2410x arm arm920t - 2011-07-17
+netstar arm arm925t - 2011-07-17
+mx1fs2 arm arm920t - 2011-07-17
+lpd7a404 arm lh7a40x - 2011-07-17
+edb9301 arm arm920t - 2011-07-17
+edb9302 arm arm920t - 2011-07-17
+edb9302a arm arm920t - 2011-07-17
+edb9307 arm arm920t - 2011-07-17
+edb9307a arm arm920t - 2011-07-17
+edb9312 arm arm920t - 2011-07-17
+edb9315 arm arm920t - 2011-07-17
+edb9315a arm arm920t - 2011-07-17
+B2 arm s3c44b0 - 2011-07-16 Andrea Scian <andrea.scian@dave-tech.it>
+armadillo arm arm720t - 2011-07-16 Rowel Atienza <rowel@diwalabs.com>
+assabet arm sa1100 - 2011-07-16 George G. Davis <gdavis@mvista.com>
trab arm S3C2400 - 2011-05-01 Gary Jennejohn <garyj@denx.de>
xsengine ARM PXA2xx 4262a7c 2010-10-20
wepep250 ARM PXA2xx 7369478 2010-10-20 Peter Figuli <peposh@etc.sk>
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index 6efbb02..a7f36b2 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -2,6 +2,9 @@
* Copyright (C) 2009
* Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -22,10 +25,16 @@
*/
#include <common.h>
#include <asm/arch/imx-regs.h>
+#include <asm/gpio.h>
#include <asm/io.h>
-#include <mxc_gpio.h>
#include <errno.h>
+enum mxc_gpio_direction {
+ MXC_GPIO_DIRECTION_IN,
+ MXC_GPIO_DIRECTION_OUT,
+};
+
+
/* GPIO port description */
static unsigned long gpio_ports[] = {
[0] = GPIO1_BASE_ADDR,
@@ -41,7 +50,8 @@ static unsigned long gpio_ports[] = {
#endif
};
-int mxc_gpio_direction(unsigned int gpio, enum mxc_gpio_direction direction)
+static int mxc_gpio_direction(unsigned int gpio,
+ enum mxc_gpio_direction direction)
{
unsigned int port = gpio >> 5;
struct gpio_regs *regs;
@@ -68,7 +78,7 @@ int mxc_gpio_direction(unsigned int gpio, enum mxc_gpio_direction direction)
return 0;
}
-void mxc_gpio_set(unsigned int gpio, unsigned int value)
+void gpio_set_value(int gpio, int value)
{
unsigned int port = gpio >> 5;
struct gpio_regs *regs;
@@ -89,7 +99,7 @@ void mxc_gpio_set(unsigned int gpio, unsigned int value)
writel(l, &regs->gpio_dr);
}
-int mxc_gpio_get(unsigned int gpio)
+int gpio_get_value(int gpio)
{
unsigned int port = gpio >> 5;
struct gpio_regs *regs;
@@ -106,3 +116,36 @@ int mxc_gpio_get(unsigned int gpio)
return l;
}
+
+int gpio_request(int gp, const char *label)
+{
+ unsigned int port = gp >> 5;
+ if (port >= ARRAY_SIZE(gpio_ports))
+ return -EINVAL;
+ return 0;
+}
+
+void gpio_free(int gp)
+{
+}
+
+void gpio_toggle_value(int gp)
+{
+ gpio_set_value(gp, !gpio_get_value(gp));
+}
+
+int gpio_direction_input(int gp)
+{
+ return mxc_gpio_direction(gp, MXC_GPIO_DIRECTION_IN);
+}
+
+int gpio_direction_output(int gp, int value)
+{
+ int ret = mxc_gpio_direction(gp, MXC_GPIO_DIRECTION_OUT);
+
+ if (ret < 0)
+ return ret;
+
+ gpio_set_value(gp, value);
+ return 0;
+}
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
index a1bcddc..1edf9a2 100644
--- a/drivers/gpio/s5p_gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -36,7 +36,7 @@
#define RATE_MASK(x) (0x1 << (x + 16))
#define RATE_SET(x) (0x1 << (x + 16))
-void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
+void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
{
unsigned int value;
@@ -46,11 +46,11 @@ void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
writel(value, &bank->con);
}
-void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
+void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
{
unsigned int value;
- gpio_cfg_pin(bank, gpio, GPIO_OUTPUT);
+ s5p_gpio_cfg_pin(bank, gpio, GPIO_OUTPUT);
value = readl(&bank->dat);
value &= ~DAT_MASK(gpio);
@@ -59,12 +59,12 @@ void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
writel(value, &bank->dat);
}
-void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
+void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
{
- gpio_cfg_pin(bank, gpio, GPIO_INPUT);
+ s5p_gpio_cfg_pin(bank, gpio, GPIO_INPUT);
}
-void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
+void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
{
unsigned int value;
@@ -75,7 +75,7 @@ void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
writel(value, &bank->dat);
}
-unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
+unsigned int s5p_gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
{
unsigned int value;
@@ -83,7 +83,7 @@ unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
return !!(value & DAT_MASK(gpio));
}
-void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
+void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
@@ -102,7 +102,7 @@ void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
writel(value, &bank->pull);
}
-void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
+void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
@@ -123,7 +123,7 @@ void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
writel(value, &bank->drv);
}
-void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
+void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
@@ -141,3 +141,47 @@ void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
writel(value, &bank->drv);
}
+
+struct s5p_gpio_bank *s5p_gpio_get_bank(int nr)
+{
+ int bank = nr / GPIO_PER_BANK;
+ bank *= sizeof(struct s5p_gpio_bank);
+
+ return (struct s5p_gpio_bank *) (s5p_gpio_base(nr) + bank);
+}
+
+int s5p_gpio_get_pin(int nr)
+{
+ return nr % GPIO_PER_BANK;
+}
+
+int gpio_request(int gpio, const char *label)
+{
+ return 0;
+}
+
+int gpio_direction_input(int nr)
+{
+ s5p_gpio_direction_input(s5p_gpio_get_bank(nr),
+ s5p_gpio_get_pin(nr));
+ return 0;
+}
+
+int gpio_direction_output(int nr, int value)
+{
+ s5p_gpio_direction_output(s5p_gpio_get_bank(nr),
+ s5p_gpio_get_pin(nr), value);
+ return 0;
+}
+
+int gpio_get_value(int nr)
+{
+ return (int) s5p_gpio_get_value(s5p_gpio_get_bank(nr),
+ s5p_gpio_get_pin(nr));
+}
+
+void gpio_set_value(int nr, int value)
+{
+ s5p_gpio_set_value(s5p_gpio_get_bank(nr),
+ s5p_gpio_get_pin(nr), value);
+}
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 3968c14..e5ca121 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -35,7 +35,6 @@ COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o
COBJS-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o
COBJS-$(CONFIG_MV_SDHCI) += mv_sdhci.o
COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o
-COBJS-$(CONFIG_OMAP3_MMC) += omap3_mmc.o
COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
COBJS-$(CONFIG_S5P_MMC) += s5p_mmc.o
diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c
deleted file mode 100644
index 15d41e5..0000000
--- a/drivers/mmc/omap3_mmc.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * (C) Copyright 2008
- * Texas Instruments, <www.ti.com>
- * Syed Mohammed Khasim <khasim@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation's version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <fat.h>
-#include <mmc.h>
-#include <part.h>
-#include <i2c.h>
-#include <twl4030.h>
-#include <asm/io.h>
-
-#include "omap3_mmc.h"
-
-static const unsigned short mmc_transspeed_val[15][4] = {
- {CLKD(10, 1), CLKD(10, 10), CLKD(10, 100), CLKD(10, 1000)},
- {CLKD(12, 1), CLKD(12, 10), CLKD(12, 100), CLKD(12, 1000)},
- {CLKD(13, 1), CLKD(13, 10), CLKD(13, 100), CLKD(13, 1000)},
- {CLKD(15, 1), CLKD(15, 10), CLKD(15, 100), CLKD(15, 1000)},
- {CLKD(20, 1), CLKD(20, 10), CLKD(20, 100), CLKD(20, 1000)},
- {CLKD(26, 1), CLKD(26, 10), CLKD(26, 100), CLKD(26, 1000)},
- {CLKD(30, 1), CLKD(30, 10), CLKD(30, 100), CLKD(30, 1000)},
- {CLKD(35, 1), CLKD(35, 10), CLKD(35, 100), CLKD(35, 1000)},
- {CLKD(40, 1), CLKD(40, 10), CLKD(40, 100), CLKD(40, 1000)},
- {CLKD(45, 1), CLKD(45, 10), CLKD(45, 100), CLKD(45, 1000)},
- {CLKD(52, 1), CLKD(52, 10), CLKD(52, 100), CLKD(52, 1000)},
- {CLKD(55, 1), CLKD(55, 10), CLKD(55, 100), CLKD(55, 1000)},
- {CLKD(60, 1), CLKD(60, 10), CLKD(60, 100), CLKD(60, 1000)},
- {CLKD(70, 1), CLKD(70, 10), CLKD(70, 100), CLKD(70, 1000)},
- {CLKD(80, 1), CLKD(80, 10), CLKD(80, 100), CLKD(80, 1000)}
-};
-
-static mmc_card_data cur_card_data;
-static block_dev_desc_t mmc_blk_dev;
-static hsmmc_t *mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
-
-int mmc_set_dev(int dev_num)
-{
- switch (dev_num) {
- case 1:
- mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
- break;
- case 2:
- mmc_base = (hsmmc_t *)OMAP_HSMMC2_BASE;
- break;
- case 3:
- mmc_base = (hsmmc_t *)OMAP_HSMMC3_BASE;
- break;
- default:
- mmc_base = (hsmmc_t *)OMAP_HSMMC1_BASE;
- return 1;
- }
-
- return 0;
-}
-
-block_dev_desc_t *mmc_get_dev(int dev)
-{
- return (block_dev_desc_t *) &mmc_blk_dev;
-}
-
-static unsigned char mmc_board_init(void)
-{
-#if defined(CONFIG_TWL4030_POWER)
- twl4030_power_mmc_init();
-#endif
-
-#if defined(CONFIG_OMAP34XX)
- t2_t *t2_base = (t2_t *)T2_BASE;
- struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
-
- writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 |
- PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0,
- &t2_base->pbias_lite);
-
- writel(readl(&t2_base->devconf0) | MMCSDIO1ADPCLKISEL,
- &t2_base->devconf0);
-
- writel(readl(&t2_base->devconf1) | MMCSDIO2ADPCLKISEL,
- &t2_base->devconf1);
-
- writel(readl(&prcm_base->fclken1_core) |
- EN_MMC1 | EN_MMC2 | EN_MMC3,
- &prcm_base->fclken1_core);
-
- writel(readl(&prcm_base->iclken1_core) |
- EN_MMC1 | EN_MMC2 | EN_MMC3,
- &prcm_base->iclken1_core);
-#endif
-
-/* TODO add appropriate OMAP4 init */
-
- return 1;
-}
-
-static void mmc_init_stream(void)
-{
- writel(readl(&mmc_base->con) | INIT_INITSTREAM, &mmc_base->con);
-
- writel(MMC_CMD0, &mmc_base->cmd);
- while (!(readl(&mmc_base->stat) & CC_MASK));
-
- writel(CC_MASK, &mmc_base->stat);
-
- writel(MMC_CMD0, &mmc_base->cmd);
- while (!(readl(&mmc_base->stat) & CC_MASK));
-
- writel(readl(&mmc_base->con) & ~INIT_INITSTREAM, &mmc_base->con);
-}
-
-static unsigned char mmc_clock_config(unsigned int iclk, unsigned short clk_div)
-{
- unsigned int val;
-
- mmc_reg_out(&mmc_base->sysctl, (ICE_MASK | DTO_MASK | CEN_MASK),
- (ICE_STOP | DTO_15THDTO | CEN_DISABLE));
-
- switch (iclk) {
- case CLK_INITSEQ:
- val = MMC_INIT_SEQ_CLK / 2;
- break;
- case CLK_400KHZ:
- val = MMC_400kHz_CLK;
- break;
- case CLK_MISC:
- val = clk_div;
- break;
- default:
- return 0;
- }
- mmc_reg_out(&mmc_base->sysctl, ICE_MASK | CLKD_MASK,
- (val << CLKD_OFFSET) | ICE_OSCILLATE);
-
- while ((readl(&mmc_base->sysctl) & ICS_MASK) == ICS_NOTREADY);
-
- writel(readl(&mmc_base->sysctl) | CEN_ENABLE, &mmc_base->sysctl);
- return 1;
-}
-
-static unsigned char mmc_init_setup(void)
-{
- unsigned int reg_val;
-
- mmc_board_init();
-
- writel(readl(&mmc_base->sysconfig) | MMC_SOFTRESET,
- &mmc_base->sysconfig);
- while ((readl(&mmc_base->sysstatus) & RESETDONE) == 0);
-
- writel(readl(&mmc_base->sysctl) | SOFTRESETALL, &mmc_base->sysctl);
- while ((readl(&mmc_base->sysctl) & SOFTRESETALL) != 0x0);
-
- writel(DTW_1_BITMODE | SDBP_PWROFF | SDVS_3V0, &mmc_base->hctl);
- writel(readl(&mmc_base->capa) | VS30_3V0SUP | VS18_1V8SUP,
- &mmc_base->capa);
-
- reg_val = readl(&mmc_base->con) & RESERVED_MASK;
-
- writel(CTPL_MMC_SD | reg_val | WPP_ACTIVEHIGH | CDP_ACTIVEHIGH |
- MIT_CTO | DW8_1_4BITMODE | MODE_FUNC | STR_BLOCK |
- HR_NOHOSTRESP | INIT_NOINIT | NOOPENDRAIN, &mmc_base->con);
-
- mmc_clock_config(CLK_INITSEQ, 0);
- writel(readl(&mmc_base->hctl) | SDBP_PWRON, &mmc_base->hctl);
-
- writel(IE_BADA | IE_CERR | IE_DEB | IE_DCRC | IE_DTO | IE_CIE |
- IE_CEB | IE_CCRC | IE_CTO | IE_BRR | IE_BWR | IE_TC | IE_CC,
- &mmc_base->ie);
-
- mmc_init_stream();
- return 1;
-}
-
-static unsigned char mmc_send_cmd(unsigned int cmd, unsigned int arg,
- unsigned int *response)
-{
- unsigned int mmc_stat;
-
- while ((readl(&mmc_base->pstate) & DATI_MASK) == DATI_CMDDIS);
-
- writel(BLEN_512BYTESLEN | NBLK_STPCNT, &mmc_base->blk);
- writel(0xFFFFFFFF, &mmc_base->stat);
- writel(arg, &mmc_base->arg);
- writel(cmd | CMD_TYPE_NORMAL | CICE_NOCHECK | CCCE_NOCHECK |
- MSBS_SGLEBLK | ACEN_DISABLE | BCE_DISABLE | DE_DISABLE,
- &mmc_base->cmd);
-
- while (1) {
- do {
- mmc_stat = readl(&mmc_base->stat);
- } while (mmc_stat == 0);
-
- if ((mmc_stat & ERRI_MASK) != 0)
- return (unsigned char) mmc_stat;
-
- if (mmc_stat & CC_MASK) {
- writel(CC_MASK, &mmc_base->stat);
- response[0] = readl(&mmc_base->rsp10);
- if ((cmd & RSP_TYPE_MASK) == RSP_TYPE_LGHT136) {
- response[1] = readl(&mmc_base->rsp32);
- response[2] = readl(&mmc_base->rsp54);
- response[3] = readl(&mmc_base->rsp76);
- }
- break;
- }
- }
- return 1;
-}
-
-static unsigned char mmc_read_data(unsigned int *output_buf)
-{
- unsigned int mmc_stat;
- unsigned int read_count = 0;
-
- /*
- * Start Polled Read
- */
- while (1) {
- do {
- mmc_stat = readl(&mmc_base->stat);
- } while (mmc_stat == 0);
-
- if ((mmc_stat & ERRI_MASK) != 0)
- return (unsigned char) mmc_stat;
-
- if (mmc_stat & BRR_MASK) {
- unsigned int k;
-
- writel(readl(&mmc_base->stat) | BRR_MASK,
- &mmc_base->stat);
- for (k = 0; k < MMCSD_SECTOR_SIZE / 4; k++) {
- *output_buf = readl(&mmc_base->data);
- output_buf++;
- read_count += 4;
- }
- }
-
- if (mmc_stat & BWR_MASK)
- writel(readl(&mmc_base->stat) | BWR_MASK,
- &mmc_base->stat);
-
- if (mmc_stat & TC_MASK) {
- writel(readl(&mmc_base->stat) | TC_MASK,
- &mmc_base->stat);
- break;
- }
- }
- return 1;
-}
-
-static unsigned char mmc_detect_card(mmc_card_data *mmc_card_cur)
-{
- unsigned char err;
- unsigned int argument = 0;
- unsigned int ocr_value, ocr_recvd, ret_cmd41, hcs_val;
- unsigned short retry_cnt = 2000;
- mmc_resp_t mmc_resp;
-
- /* Set to Initialization Clock */
- err = mmc_clock_config(CLK_400KHZ, 0);
- if (err != 1)
- return err;
-
- mmc_card_cur->RCA = MMC_RELATIVE_CARD_ADDRESS;
- argument = 0x00000000;
-
- ocr_value = (0x1FF << 15);
- err = mmc_send_cmd(MMC_CMD0, argument, mmc_resp.resp);
- if (err != 1)
- return err;
-
- argument = SD_CMD8_CHECK_PATTERN | SD_CMD8_2_7_3_6_V_RANGE;
- err = mmc_send_cmd(MMC_SDCMD8, argument, mmc_resp.resp);
- hcs_val = (err == 1) ?
- MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR :
- MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE;
-
- argument = 0x0000 << 16;
- err = mmc_send_cmd(MMC_CMD55, argument, mmc_resp.resp);
- if (err == 1) {
- mmc_card_cur->card_type = SD_CARD;
- ocr_value |= hcs_val;
- ret_cmd41 = MMC_ACMD41;
- } else {
- mmc_card_cur->card_type = MMC_CARD;
- ocr_value |= MMC_OCR_REG_ACCESS_MODE_SECTOR;
- ret_cmd41 = MMC_CMD1;
- writel(readl(&mmc_base->con) & ~OD, &mmc_base->con);
- writel(readl(&mmc_base->con) | OPENDRAIN, &mmc_base->con);
- }
-
- argument = ocr_value;
- err = mmc_send_cmd(ret_cmd41, argument, mmc_resp.resp);
- if (err != 1)
- return err;
-
- ocr_recvd = mmc_resp.r3.ocr;
-
- while (!(ocr_recvd & (0x1 << 31)) && (retry_cnt > 0)) {
- retry_cnt--;
- if (mmc_card_cur->card_type == SD_CARD) {
- argument = 0x0000 << 16;
- err = mmc_send_cmd(MMC_CMD55, argument, mmc_resp.resp);
- }
-
- argument = ocr_value;
- err = mmc_send_cmd(ret_cmd41, argument, mmc_resp.resp);
- if (err != 1)
- return err;
- ocr_recvd = mmc_resp.r3.ocr;
- }
-
- if (!(ocr_recvd & (0x1 << 31)))
- return 0;
-
- if (mmc_card_cur->card_type == MMC_CARD) {
- if ((ocr_recvd & MMC_OCR_REG_ACCESS_MODE_MASK) ==
- MMC_OCR_REG_ACCESS_MODE_SECTOR) {
- mmc_card_cur->mode = SECTOR_MODE;
- } else {
- mmc_card_cur->mode = BYTE_MODE;
- }
-
- ocr_recvd &= ~MMC_OCR_REG_ACCESS_MODE_MASK;
- } else {
- if ((ocr_recvd & MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK)
- == MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR) {
- mmc_card_cur->mode = SECTOR_MODE;
- } else {
- mmc_card_cur->mode = BYTE_MODE;
- }
- ocr_recvd &= ~MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK;
- }
-
- ocr_recvd &= ~(0x1 << 31);
- if (!(ocr_recvd & ocr_value))
- return 0;
-
- err = mmc_send_cmd(MMC_CMD2, argument, mmc_resp.resp);
- if (err != 1)
- return err;
-
- if (mmc_card_cur->card_type == MMC_CARD) {
- argument = mmc_card_cur->RCA << 16;
- err = mmc_send_cmd(MMC_CMD3, argument, mmc_resp.resp);
- if (err != 1)
- return err;
- } else {
- argument = 0x00000000;
- err = mmc_send_cmd(MMC_SDCMD3, argument, mmc_resp.resp);
- if (err != 1)
- return err;
-
- mmc_card_cur->RCA = mmc_resp.r6.newpublishedrca;
- }
-
- writel(readl(&mmc_base->con) & ~OD, &mmc_base->con);
- writel(readl(&mmc_base->con) | NOOPENDRAIN, &mmc_base->con);
- return 1;
-}
-
-static unsigned char mmc_read_cardsize(mmc_card_data *mmc_dev_data,
- mmc_csd_reg_t *cur_csd)
-{
- mmc_extended_csd_reg_t ext_csd;
- unsigned int size, count, blk_len, blk_no, card_size, argument;
- unsigned char err;
- unsigned int resp[4];
-
- if (mmc_dev_data->mode == SECTOR_MODE) {
- if (mmc_dev_data->card_type == SD_CARD) {
- card_size =
- (((mmc_sd2_csd_reg_t *) cur_csd)->
- c_size_lsb & MMC_SD2_CSD_C_SIZE_LSB_MASK) |
- ((((mmc_sd2_csd_reg_t *) cur_csd)->
- c_size_msb & MMC_SD2_CSD_C_SIZE_MSB_MASK)
- << MMC_SD2_CSD_C_SIZE_MSB_OFFSET);
- mmc_dev_data->size = card_size * 1024;
- if (mmc_dev_data->size == 0)
- return 0;
- } else {
- argument = 0x00000000;
- err = mmc_send_cmd(MMC_CMD8, argument, resp);
- if (err != 1)
- return err;
- err = mmc_read_data((unsigned int *) &ext_csd);
- if (err != 1)
- return err;
- mmc_dev_data->size = ext_csd.sectorcount;
-
- if (mmc_dev_data->size == 0)
- mmc_dev_data->size = 8388608;
- }
- } else {
- if (cur_csd->c_size_mult >= 8)
- return 0;
-
- if (cur_csd->read_bl_len >= 12)
- return 0;
-
- /* Compute size */
- count = 1 << (cur_csd->c_size_mult + 2);
- card_size = (cur_csd->c_size_lsb & MMC_CSD_C_SIZE_LSB_MASK) |
- ((cur_csd->c_size_msb & MMC_CSD_C_SIZE_MSB_MASK)
- << MMC_CSD_C_SIZE_MSB_OFFSET);
- blk_no = (card_size + 1) * count;
- blk_len = 1 << cur_csd->read_bl_len;
- size = blk_no * blk_len;
- mmc_dev_data->size = size / MMCSD_SECTOR_SIZE;
- if (mmc_dev_data->size == 0)
- return 0;
- }
- return 1;
-}
-
-static unsigned long mmc_bread(int dev_num, unsigned long blknr,
- lbaint_t blkcnt, void *dst)
-{
- unsigned char err;
- unsigned int argument;
- unsigned int resp[4];
- unsigned int *output_buf = dst;
- unsigned int sec_inc_val;
- lbaint_t i;
-
- if (blkcnt == 0)
- return 0;
-
- if (cur_card_data.mode == SECTOR_MODE) {
- argument = blknr;
- sec_inc_val = 1;
- } else {
- argument = blknr * MMCSD_SECTOR_SIZE;
- sec_inc_val = MMCSD_SECTOR_SIZE;
- }
-
- for (i = 0; i < blkcnt; i++) {
- err = mmc_send_cmd(MMC_CMD17, argument, resp);
- if (err != 1) {
- printf("mmc: CMD17 failed, status = %08x\n", err);
- break;
- }
-
- err = mmc_read_data(output_buf);
- if (err != 1) {
- printf("mmc: read failed, status = %08x\n", err);
- break;
- }
-
- output_buf += (MMCSD_SECTOR_SIZE / 4);
- argument += sec_inc_val;
- }
-
- return i;
-}
-
-static unsigned char configure_mmc(mmc_card_data *mmc_card_cur)
-{
- unsigned char ret_val;
- unsigned int argument;
- unsigned int trans_clk, trans_fact, trans_unit, retries = 2;
- unsigned char trans_speed;
- mmc_resp_t mmc_resp;
-
- ret_val = mmc_init_setup();
-
- if (ret_val != 1)
- return ret_val;
-
- do {
- ret_val = mmc_detect_card(mmc_card_cur);
- retries--;
- } while ((retries > 0) && (ret_val != 1));
-
- argument = mmc_card_cur->RCA << 16;
- ret_val = mmc_send_cmd(MMC_CMD9, argument, mmc_resp.resp);
- if (ret_val != 1)
- return ret_val;
-
- if (mmc_card_cur->card_type == MMC_CARD)
- mmc_card_cur->version = mmc_resp.Card_CSD.spec_vers;
-
- trans_speed = mmc_resp.Card_CSD.tran_speed;
-
- ret_val = mmc_send_cmd(MMC_CMD4, MMC_DSR_DEFAULT << 16, mmc_resp.resp);
- if (ret_val != 1)
- return ret_val;
-
- trans_unit = trans_speed & MMC_CSD_TRAN_SPEED_UNIT_MASK;
- trans_fact = trans_speed & MMC_CSD_TRAN_SPEED_FACTOR_MASK;
-
- if (trans_unit > MMC_CSD_TRAN_SPEED_UNIT_100MHZ)
- return 0;
-
- if ((trans_fact < MMC_CSD_TRAN_SPEED_FACTOR_1_0) ||
- (trans_fact > MMC_CSD_TRAN_SPEED_FACTOR_8_0))
- return 0;
-
- trans_unit >>= 0;
- trans_fact >>= 3;
-
- trans_clk = mmc_transspeed_val[trans_fact - 1][trans_unit] * 2;
- ret_val = mmc_clock_config(CLK_MISC, trans_clk);
-
- if (ret_val != 1)
- return ret_val;
-
- argument = mmc_card_cur->RCA << 16;
- ret_val = mmc_send_cmd(MMC_CMD7_SELECT, argument, mmc_resp.resp);
- if (ret_val != 1)
- return ret_val;
-
- /* Configure the block length to 512 bytes */
- argument = MMCSD_SECTOR_SIZE;
- ret_val = mmc_send_cmd(MMC_CMD16, argument, mmc_resp.resp);
- if (ret_val != 1)
- return ret_val;
-
- /* get the card size in sectors */
- ret_val = mmc_read_cardsize(mmc_card_cur, &mmc_resp.Card_CSD);
- if (ret_val != 1)
- return ret_val;
-
- return 1;
-}
-
-int mmc_legacy_init(int dev)
-{
- if (mmc_set_dev(dev) != 0)
- return 1;
-
- if (configure_mmc(&cur_card_data) != 1)
- return 1;
-
- mmc_blk_dev.if_type = IF_TYPE_MMC;
- mmc_blk_dev.part_type = PART_TYPE_DOS;
- mmc_blk_dev.dev = 0;
- mmc_blk_dev.lun = 0;
- mmc_blk_dev.type = 0;
-
- /* FIXME fill in the correct size (is set to 32MByte) */
- mmc_blk_dev.blksz = MMCSD_SECTOR_SIZE;
- mmc_blk_dev.lba = 0x10000;
- mmc_blk_dev.removable = 0;
- mmc_blk_dev.block_read = mmc_bread;
-
- fat_register_device(&mmc_blk_dev, 1);
- return 0;
-}
diff --git a/drivers/mmc/omap3_mmc.h b/drivers/mmc/omap3_mmc.h
deleted file mode 100644
index e4d263c..0000000
--- a/drivers/mmc/omap3_mmc.h
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * (C) Copyright 2008
- * Texas Instruments, <www.ti.com>
- * Syed Mohammed Khasim <khasim@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation's version 2 of
- * the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef MMC_H
-#define MMC_H
-
-#include <asm/arch/mmc_host_def.h>
-
-/* Responses */
-#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
-#define RSP_TYPE_R1 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK)
-#define RSP_TYPE_R1B (RSP_TYPE_LGHT48B | CCCE_CHECK | CICE_CHECK)
-#define RSP_TYPE_R2 (RSP_TYPE_LGHT136 | CCCE_CHECK | CICE_NOCHECK)
-#define RSP_TYPE_R3 (RSP_TYPE_LGHT48 | CCCE_NOCHECK | CICE_NOCHECK)
-#define RSP_TYPE_R4 (RSP_TYPE_LGHT48 | CCCE_NOCHECK | CICE_NOCHECK)
-#define RSP_TYPE_R5 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK)
-#define RSP_TYPE_R6 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK)
-#define RSP_TYPE_R7 (RSP_TYPE_LGHT48 | CCCE_CHECK | CICE_CHECK)
-
-/* All supported commands */
-#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD1 (INDEX(1) | RSP_TYPE_R3 | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD2 (INDEX(2) | RSP_TYPE_R2 | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD3 (INDEX(3) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE)
-#define MMC_SDCMD3 (INDEX(3) | RSP_TYPE_R6 | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD4 (INDEX(4) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD6 (INDEX(6) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD7_SELECT (INDEX(7) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD7_DESELECT (INDEX(7)| RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD8 (INDEX(8) | RSP_TYPE_R1 | DP_DATA | DDIR_READ)
-#define MMC_SDCMD8 (INDEX(8) | RSP_TYPE_R7 | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD9 (INDEX(9) | RSP_TYPE_R2 | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD12 (INDEX(12) | RSP_TYPE_R1B | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD13 (INDEX(13) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD15 (INDEX(15) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD16 (INDEX(16) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE)
-#define MMC_CMD17 (INDEX(17) | RSP_TYPE_R1 | DP_DATA | DDIR_READ)
-#define MMC_CMD24 (INDEX(24) | RSP_TYPE_R1 | DP_DATA | DDIR_WRITE)
-#define MMC_ACMD6 (INDEX(6) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE)
-#define MMC_ACMD41 (INDEX(41) | RSP_TYPE_R3 | DP_NO_DATA | DDIR_WRITE)
-#define MMC_ACMD51 (INDEX(51) | RSP_TYPE_R1 | DP_DATA | DDIR_READ)
-#define MMC_CMD55 (INDEX(55) | RSP_TYPE_R1 | DP_NO_DATA | DDIR_WRITE)
-
-#define MMC_AC_CMD_RCA_MASK (unsigned int)(0xFFFF << 16)
-#define MMC_BC_CMD_DSR_MASK (unsigned int)(0xFFFF << 16)
-#define MMC_DSR_DEFAULT 0x0404
-#define SD_CMD8_CHECK_PATTERN 0xAA
-#define SD_CMD8_2_7_3_6_V_RANGE (0x01 << 8)
-
-/* Clock Configurations and Macros */
-
-#define MMC_CLOCK_REFERENCE 96
-#define MMC_RELATIVE_CARD_ADDRESS 0x1234
-#define MMC_INIT_SEQ_CLK (MMC_CLOCK_REFERENCE * 1000 / 80)
-#define MMC_400kHz_CLK (MMC_CLOCK_REFERENCE * 1000 / 400)
-#define CLKDR(r, f, u) ((((r)*100) / ((f)*(u))) + 1)
-#define CLKD(f, u) (CLKDR(MMC_CLOCK_REFERENCE, f, u))
-
-#define MMC_OCR_REG_ACCESS_MODE_MASK (0x3 << 29)
-#define MMC_OCR_REG_ACCESS_MODE_BYTE (0x0 << 29)
-#define MMC_OCR_REG_ACCESS_MODE_SECTOR (0x2 << 29)
-
-#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_MASK (0x1 << 30)
-#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_BYTE (0x0 << 30)
-#define MMC_OCR_REG_HOST_CAPACITY_SUPPORT_SECTOR (0x1 << 30)
-
-#define MMC_SD2_CSD_C_SIZE_LSB_MASK 0xFFFF
-#define MMC_SD2_CSD_C_SIZE_MSB_MASK 0x003F
-#define MMC_SD2_CSD_C_SIZE_MSB_OFFSET 16
-#define MMC_CSD_C_SIZE_LSB_MASK 0x0003
-#define MMC_CSD_C_SIZE_MSB_MASK 0x03FF
-#define MMC_CSD_C_SIZE_MSB_OFFSET 2
-
-#define MMC_CSD_TRAN_SPEED_UNIT_MASK (0x07 << 0)
-#define MMC_CSD_TRAN_SPEED_FACTOR_MASK (0x0F << 3)
-#define MMC_CSD_TRAN_SPEED_UNIT_100MHZ (0x3 << 0)
-#define MMC_CSD_TRAN_SPEED_FACTOR_1_0 (0x01 << 3)
-#define MMC_CSD_TRAN_SPEED_FACTOR_8_0 (0x0F << 3)
-
-typedef struct {
- unsigned not_used:1;
- unsigned crc:7;
- unsigned ecc:2;
- unsigned file_format:2;
- unsigned tmp_write_protect:1;
- unsigned perm_write_protect:1;
- unsigned copy:1;
- unsigned file_format_grp:1;
- unsigned content_prot_app:1;
- unsigned reserved_1:4;
- unsigned write_bl_partial:1;
- unsigned write_bl_len:4;
- unsigned r2w_factor:3;
- unsigned default_ecc:2;
- unsigned wp_grp_enable:1;
- unsigned wp_grp_size:5;
- unsigned erase_grp_mult:5;
- unsigned erase_grp_size:5;
- unsigned c_size_mult:3;
- unsigned vdd_w_curr_max:3;
- unsigned vdd_w_curr_min:3;
- unsigned vdd_r_curr_max:3;
- unsigned vdd_r_curr_min:3;
- unsigned c_size_lsb:2;
- unsigned c_size_msb:10;
- unsigned reserved_2:2;
- unsigned dsr_imp:1;
- unsigned read_blk_misalign:1;
- unsigned write_blk_misalign:1;
- unsigned read_bl_partial:1;
- unsigned read_bl_len:4;
- unsigned ccc:12;
- unsigned tran_speed:8;
- unsigned nsac:8;
- unsigned taac:8;
- unsigned reserved_3:2;
- unsigned spec_vers:4;
- unsigned csd_structure:2;
-} mmc_csd_reg_t;
-
-/* csd for sd2.0 */
-typedef struct {
- unsigned not_used:1;
- unsigned crc:7;
- unsigned reserved_1:2;
- unsigned file_format:2;
- unsigned tmp_write_protect:1;
- unsigned perm_write_protect:1;
- unsigned copy:1;
- unsigned file_format_grp:1;
- unsigned reserved_2:5;
- unsigned write_bl_partial:1;
- unsigned write_bl_len:4;
- unsigned r2w_factor:3;
- unsigned reserved_3:2;
- unsigned wp_grp_enable:1;
- unsigned wp_grp_size:7;
- unsigned sector_size:7;
- unsigned erase_blk_len:1;
- unsigned reserved_4:1;
- unsigned c_size_lsb:16;
- unsigned c_size_msb:6;
- unsigned reserved_5:6;
- unsigned dsr_imp:1;
- unsigned read_blk_misalign:1;
- unsigned write_blk_misalign:1;
- unsigned read_bl_partial:1;
- unsigned read_bl_len:4;
- unsigned ccc:12;
- unsigned tran_speed:8;
- unsigned nsac:8;
- unsigned taac:8;
- unsigned reserved_6:6;
- unsigned csd_structure:2;
-} mmc_sd2_csd_reg_t;
-
-/* extended csd - 512 bytes long */
-typedef struct {
- unsigned char reserved_1[181];
- unsigned char erasedmemorycontent;
- unsigned char reserved_2;
- unsigned char buswidthmode;
- unsigned char reserved_3;
- unsigned char highspeedinterfacetiming;
- unsigned char reserved_4;
- unsigned char powerclass;
- unsigned char reserved_5;
- unsigned char commandsetrevision;
- unsigned char reserved_6;
- unsigned char commandset;
- unsigned char extendedcsdrevision;
- unsigned char reserved_7;
- unsigned char csdstructureversion;
- unsigned char reserved_8;
- unsigned char cardtype;
- unsigned char reserved_9[3];
- unsigned char powerclass_52mhz_1_95v;
- unsigned char powerclass_26mhz_1_95v;
- unsigned char powerclass_52mhz_3_6v;
- unsigned char powerclass_26mhz_3_6v;
- unsigned char reserved_10;
- unsigned char minreadperf_4b_26mhz;
- unsigned char minwriteperf_4b_26mhz;
- unsigned char minreadperf_8b_26mhz_4b_52mhz;
- unsigned char minwriteperf_8b_26mhz_4b_52mhz;
- unsigned char minreadperf_8b_52mhz;
- unsigned char minwriteperf_8b_52mhz;
- unsigned char reserved_11;
- unsigned int sectorcount;
- unsigned char reserved_12[288];
- unsigned char supportedcommandsets;
- unsigned char reserved_13[7];
-} mmc_extended_csd_reg_t;
-
-/* mmc sd responce */
-typedef struct {
- unsigned int ocr;
-} mmc_resp_r3;
-
-typedef struct {
- unsigned short cardstatus;
- unsigned short newpublishedrca;
-} mmc_resp_r6;
-
-typedef union {
- unsigned int resp[4];
- mmc_resp_r3 r3;
- mmc_resp_r6 r6;
- mmc_csd_reg_t Card_CSD;
-} mmc_resp_t;
-
-#endif /* MMC_H */
diff --git a/drivers/mmc/s5p_mmc.c b/drivers/mmc/s5p_mmc.c
index f136813..7786ecf 100644
--- a/drivers/mmc/s5p_mmc.c
+++ b/drivers/mmc/s5p_mmc.c
@@ -232,9 +232,15 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
__func__, mask);
return -1;
} else if (mask & (1 << 3)) {
- /* DMA Interrupt */
+ /*
+ * DMA Interrupt, restart the transfer where
+ * it was interrupted.
+ */
+ unsigned int address = readl(&host->reg->sysad);
+
debug("DMA end\n");
- break;
+ writel((1 << 3), &host->reg->norintsts);
+ writel(address, &host->reg->sysad);
} else if (mask & (1 << 1)) {
/* Transfer Complete */
debug("r/w is done\n");
@@ -425,12 +431,13 @@ static int mmc_core_init(struct mmc *mmc)
* NORMAL Interrupt Status Enable Register init
* [5] ENSTABUFRDRDY : Buffer Read Ready Status Enable
* [4] ENSTABUFWTRDY : Buffer write Ready Status Enable
+ * [3] ENSTADMAINT : DMA Interrupt Status Enable
* [1] ENSTASTANSCMPLT : Transfre Complete Status Enable
* [0] ENSTACMDCMPLT : Command Complete Status Enable
- */
+ */
mask = readl(&host->reg->norintstsen);
mask &= ~(0xffff);
- mask |= (1 << 5) | (1 << 4) | (1 << 1) | (1 << 0);
+ mask |= (1 << 5) | (1 << 4) | (1 << 3) | (1 << 1) | (1 << 0);
writel(mask, &host->reg->norintstsen);
/*
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 66c0d13..c0b8929 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -457,7 +457,7 @@ static void davinci_eth_ch_teardown(int ch)
if (ch == EMAC_CH_TX) {
/* Init TX channel teardown */
- writel(1, &adap_emac->TXTEARDOWN);
+ writel(0, &adap_emac->TXTEARDOWN);
do {
/*
* Wait here for Tx teardown completion interrupt to
@@ -476,7 +476,7 @@ static void davinci_eth_ch_teardown(int ch)
writel(0, &adap_emac->TX0HDP);
} else {
/* Init RX channel teardown */
- writel(1, &adap_emac->RXTEARDOWN);
+ writel(0, &adap_emac->RXTEARDOWN);
do {
/*
* Wait here for Rx teardown completion interrupt to
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
index 81381d9..2fa7486 100644
--- a/drivers/spi/mxc_spi.c
+++ b/drivers/spi/mxc_spi.c
@@ -23,7 +23,7 @@
#include <spi.h>
#include <asm/errno.h>
#include <asm/io.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
@@ -145,14 +145,14 @@ void spi_cs_activate(struct spi_slave *slave)
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
if (mxcs->gpio > 0)
- mxc_gpio_set(mxcs->gpio, mxcs->ss_pol);
+ gpio_set_value(mxcs->gpio, mxcs->ss_pol);
}
void spi_cs_deactivate(struct spi_slave *slave)
{
struct mxc_spi_slave *mxcs = to_mxc_spi_slave(slave);
if (mxcs->gpio > 0)
- mxc_gpio_set(mxcs->gpio,
+ gpio_set_value(mxcs->gpio,
!(mxcs->ss_pol));
}
@@ -468,7 +468,7 @@ static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs)
if (cs > 3) {
mxcs->gpio = cs >> 8;
cs &= 3;
- ret = mxc_gpio_direction(mxcs->gpio, OUT);
+ ret = gpio_direction_output(mxcs->gpio, 0);
if (ret) {
printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio);
return -EINVAL;
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 70c02c9..2197119 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -461,7 +461,6 @@ ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer,
/* Check that the TD processing happened */
if (token & 0x80) {
printf("EHCI timed out on TD - token=%#x\n", token);
- goto fail;
}
/* Disable async schedule. */
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 945ab64..3d0ad0c 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -55,7 +55,7 @@ struct ehci_hccr {
#define HCS_N_PORTS(p) (((p) >> 0) & 0xf)
uint32_t cr_hccparams;
uint8_t cr_hcsp_portrt[8];
-} __attribute__ ((packed));
+} __attribute__ ((packed, aligned(4)));
struct ehci_hcor {
uint32_t or_usbcmd;
@@ -85,7 +85,7 @@ struct ehci_hcor {
#define FLAG_CF (1 << 0) /* true: we'll support "high speed" */
uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
uint32_t or_systune;
-} __attribute__ ((packed));
+} __attribute__ ((packed, aligned(4)));
#define USBMODE 0x68 /* USB Device mode */
#define USBMODE_SDIS (1 << 3) /* Stream disable */
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 086dc05..226684ad 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -41,6 +41,8 @@ COBJS-$(CONFIG_SED156X) += sed156x.o
COBJS-$(CONFIG_VIDEO_SM501) += sm501.o
COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o
COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o
+COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o
+COBJS-y += videomodes.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/video/omap3_dss.c b/drivers/video/omap3_dss.c
new file mode 100644
index 0000000..b322cc3
--- /dev/null
+++ b/drivers/video/omap3_dss.c
@@ -0,0 +1,131 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * Referred to Linux Kernel DSS driver files for OMAP3 by
+ * Tomi Valkeinen from drivers/video/omap2/dss/
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 and any
+ * later version the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/dss.h>
+
+/*
+ * Configure VENC for a given Mode (NTSC / PAL)
+ */
+void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
+ u32 height, u32 width)
+{
+ struct venc_regs *venc = (struct venc_regs *) OMAP3_VENC_BASE;
+ struct dss_regs *dss = (struct dss_regs *) OMAP3_DSS_BASE;
+ struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
+
+ writel(venc_cfg->status, &venc->status);
+ writel(venc_cfg->f_control, &venc->f_control);
+ writel(venc_cfg->vidout_ctrl, &venc->vidout_ctrl);
+ writel(venc_cfg->sync_ctrl, &venc->sync_ctrl);
+ writel(venc_cfg->llen, &venc->llen);
+ writel(venc_cfg->flens, &venc->flens);
+ writel(venc_cfg->hfltr_ctrl, &venc->hfltr_ctrl);
+ writel(venc_cfg->cc_carr_wss_carr, &venc->cc_carr_wss_carr);
+ writel(venc_cfg->c_phase, &venc->c_phase);
+ writel(venc_cfg->gain_u, &venc->gain_u);
+ writel(venc_cfg->gain_v, &venc->gain_v);
+ writel(venc_cfg->gain_y, &venc->gain_y);
+ writel(venc_cfg->black_level, &venc->black_level);
+ writel(venc_cfg->blank_level, &venc->blank_level);
+ writel(venc_cfg->x_color, &venc->x_color);
+ writel(venc_cfg->m_control, &venc->m_control);
+ writel(venc_cfg->bstamp_wss_data, &venc->bstamp_wss_data);
+ writel(venc_cfg->s_carr, &venc->s_carr);
+ writel(venc_cfg->line21, &venc->line21);
+ writel(venc_cfg->ln_sel, &venc->ln_sel);
+ writel(venc_cfg->l21__wc_ctl, &venc->l21__wc_ctl);
+ writel(venc_cfg->htrigger_vtrigger, &venc->htrigger_vtrigger);
+ writel(venc_cfg->savid__eavid, &venc->savid__eavid);
+ writel(venc_cfg->flen__fal, &venc->flen__fal);
+ writel(venc_cfg->lal__phase_reset, &venc->lal__phase_reset);
+ writel(venc_cfg->hs_int_start_stop_x,
+ &venc->hs_int_start_stop_x);
+ writel(venc_cfg->hs_ext_start_stop_x,
+ &venc->hs_ext_start_stop_x);
+ writel(venc_cfg->vs_int_start_x, &venc->vs_int_start_x);
+ writel(venc_cfg->vs_int_stop_x__vs_int_start_y,
+ &venc->vs_int_stop_x__vs_int_start_y);
+ writel(venc_cfg->vs_int_stop_y__vs_ext_start_x,
+ &venc->vs_int_stop_y__vs_ext_start_x);
+ writel(venc_cfg->vs_ext_stop_x__vs_ext_start_y,
+ &venc->vs_ext_stop_x__vs_ext_start_y);
+ writel(venc_cfg->vs_ext_stop_y, &venc->vs_ext_stop_y);
+ writel(venc_cfg->avid_start_stop_x, &venc->avid_start_stop_x);
+ writel(venc_cfg->avid_start_stop_y, &venc->avid_start_stop_y);
+ writel(venc_cfg->fid_int_start_x__fid_int_start_y,
+ &venc->fid_int_start_x__fid_int_start_y);
+ writel(venc_cfg->fid_int_offset_y__fid_ext_start_x,
+ &venc->fid_int_offset_y__fid_ext_start_x);
+ writel(venc_cfg->fid_ext_start_y__fid_ext_offset_y,
+ &venc->fid_ext_start_y__fid_ext_offset_y);
+ writel(venc_cfg->tvdetgp_int_start_stop_x,
+ &venc->tvdetgp_int_start_stop_x);
+ writel(venc_cfg->tvdetgp_int_start_stop_y,
+ &venc->tvdetgp_int_start_stop_y);
+ writel(venc_cfg->gen_ctrl, &venc->gen_ctrl);
+ writel(venc_cfg->output_control, &venc->output_control);
+ writel(venc_cfg->dac_b__dac_c, &venc->dac_b__dac_c);
+
+ /* Configure DSS for VENC Settings */
+ writel(VENC_DSS_CONFIG, &dss->control);
+
+ /* Configure height and width for Digital out */
+ writel(((height << DIG_LPP_SHIFT) | width), &dispc->size_dig);
+}
+
+/*
+ * Configure Panel Specific Parameters
+ */
+void omap3_dss_panel_config(const struct panel_config *panel_cfg)
+{
+ struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
+
+ writel(panel_cfg->timing_h, &dispc->timing_h);
+ writel(panel_cfg->timing_v, &dispc->timing_v);
+ writel(panel_cfg->pol_freq, &dispc->pol_freq);
+ writel(panel_cfg->divisor, &dispc->divisor);
+ writel(panel_cfg->lcd_size, &dispc->size_lcd);
+ writel((panel_cfg->load_mode << FRAME_MODE_SHIFT), &dispc->config);
+ writel(((panel_cfg->panel_type << TFTSTN_SHIFT) |
+ (panel_cfg->data_lines << DATALINES_SHIFT)), &dispc->control);
+ writel(panel_cfg->panel_color, &dispc->default_color0);
+}
+
+/*
+ * Enable LCD and DIGITAL OUT in DSS
+ */
+void omap3_dss_enable(void)
+{
+ struct dispc_regs *dispc = (struct dispc_regs *) OMAP3_DISPC_BASE;
+ u32 l = 0;
+
+ l = readl(&dispc->control);
+ l |= DISPC_ENABLE;
+ writel(l, &dispc->control);
+}
diff --git a/include/common.h b/include/common.h
index 12a1074..bd10f31 100644
--- a/include/common.h
+++ b/include/common.h
@@ -616,6 +616,7 @@ ulong lcd_setmem (ulong);
ulong video_setmem (ulong);
/* arch/$(ARCH)/lib/cache.c */
+void enable_caches(void);
void flush_cache (unsigned long, unsigned long);
void flush_dcache_all(void);
void flush_dcache_range(unsigned long start, unsigned long stop);
diff --git a/include/configs/B2.h b/include/configs/B2.h
deleted file mode 100644
index e181fa8..0000000
--- a/include/configs/B2.h
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * (C) Copyright 2004
- * DAVE Srl
- *
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info@wawnet.biz
- *
- * Configuation settings for the B2 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_B2 1 /* on an B2 Board */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM7TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_ARCH_CPU_INIT
-
-#define CONFIG_S3C44B0_CLOCK_SPEED 75 /* we have a 75Mhz S3C44B0*/
-
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
-#define CONFIG_ENV_SIZE 1024 /* 1024 bytes may be used for env vars*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024 )
-
-/*
- * Hardware drivers
- */
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE 0x04000300 /* base address */
-#define CONFIG_SMC_USE_32_BIT
-#undef CONFIG_SHOW_ACTIVITY
-#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C44B0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-#define CONFIG_S3C44B0_I2C
-#define CONFIG_RTC_S3C44B0
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_I2C
-
-#define CONFIG_NET_MULTI
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_ETHADDR 00:50:c2:1e:af:fb
-#define CONFIG_BOOTARGS "setenv bootargs root=/dev/ram ip=192.168.0.70:::::eth0:off \
- ether=25,0,0,0,eth0 ethaddr=00:50:c2:1e:af:fb"
-#define CONFIG_NETMASK 255.255.0.0
-#define CONFIG_IPADDR 192.168.0.70
-#define CONFIG_SERVERIP 192.168.0.23
-#define CONFIG_BOOTFILE "B2-rootfs/usr/B2-zImage.u-boot"
-#define CONFIG_BOOTCOMMAND "bootm 20000 f0000"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0C400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0C800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x0c700000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000 /* 1 kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
-#define CONFIG_SYS_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
-#define CONFIG_SYS_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
-/*
- * The following defines are added for buggy IOP480 byte interface.
- * All other boards should use the standard values (CPCI405 etc.)
- */
-#define CONFIG_SYS_FLASH_READ0 0x0000 /* 0 is standard */
-#define CONFIG_SYS_FLASH_READ1 0x0001 /* 1 is standard */
-#define CONFIG_SYS_FLASH_READ2 0x0002 /* 2 is standard */
-
-#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
-
-/*-----------------------------------------------------------------------
- * Environment Variable setup
- */
-#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
-#define CONFIG_ENV_OFFSET 0x0 /* environment starts at the beginning of the EEPROM */
-
-/*-----------------------------------------------------------------------
- * I2C EEPROM (STM24C02W6) for environment
- */
-#define CONFIG_HARD_I2C /* I2c with hardware support */
-#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
-#define CONFIG_SYS_I2C_SLAVE 0xFE
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0xA8 /* EEPROM STM24C02W6 */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
-/* mask of address bits that overflow into the "EEPROM chip address" */
-/*#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07*/
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
- /* 16 byte page write mode using*/
- /* last 4 bits of the address */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
-
-/* Flash banks JFFS2 should use */
-/*
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 2
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-*/
-
-/*
- Linux TAGs (see arch/arm/lib/armlinux.c)
-*/
-#define CONFIG_CMDLINE_TAG
-#undef CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 743768e..e23ca45 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -93,8 +93,9 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
/*
@@ -191,16 +192,17 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyS2,115200n8\0" \
+ "mmcdev=0\0" \
"mmcargs=setenv bootargs console=${console} " \
"root=/dev/mmcblk0p2 rw " \
"rootfstype=ext3 rootwait\0" \
"nandargs=setenv bootargs console=${console} " \
"root=/dev/mtdblock4 rw " \
"rootfstype=jffs2\0" \
- "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source ${loadaddr}\0" \
- "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
@@ -210,7 +212,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc init; then " \
+ "if mmc rescan ${mmcdev}; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 6c5728d..72dd6f0 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -93,7 +93,8 @@
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
/*
@@ -190,16 +191,17 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyO2,115200n8\0" \
+ "mmcdev=0\0" \
"mmcargs=setenv bootargs console=${console} " \
"root=/dev/mmcblk0p2 rw " \
"rootfstype=ext3 rootwait\0" \
"nandargs=setenv bootargs console=${console} " \
"root=/dev/mtdblock4 rw " \
"rootfstype=jffs2\0" \
- "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source ${loadaddr}\0" \
- "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
@@ -209,7 +211,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc init; then " \
+ "if mmc rescan ${mmcdev}; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/armadillo.h b/include/configs/armadillo.h
deleted file mode 100644
index d0d0998..0000000
--- a/include/configs/armadillo.h
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * (C) Copyright 2000
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the EP7312 board.
- *
- * Modified to work on Armadillo HT1070 ARM720T board
- * (C) Copyright 2005 Rowel Atienza rowel@diwalabs.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM7 1 /* This is a ARM7 CPU */
-#define CONFIG_ARMADILLO 1 /* on an Armadillo Board */
-#define CONFIG_ARM_THUMB 1 /* this is an ARM720TDMI */
-#undef CONFIG_ARM7_REVD /* disable ARM720 REV.D Workarounds */
-
-#undef CONFIG_USE_IRQ /* don't need them anymore */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x20000300 /* armadillo board */
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-
-/*
- * select serial console configuration
- */
-#define CONFIG_CLPS7111_SERIAL
-#define CONFIG_SERIAL1 1 /* we use Serial line 1 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/ram0 rootfstype=ext2 console=ttyAM0,115200"
-
-#define CONFIG_BOOTCOMMAND "bootm 40000 180000"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "ARMADILLO # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x00040000 /* default load address for armadillo: kernel img is here*/
-
-#define CONFIG_SYS_HZ 2000 /* decrementer freq: 2 kHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB armadillo SDRAM */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x00400000 /* 4 MB */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */
-
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/assabet.h b/include/configs/assabet.h
deleted file mode 100644
index dc9bd88..0000000
--- a/include/configs/assabet.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * Configuation settings for the Intel Assabet board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_SA1110 1 /* This is an SA1100 CPU */
-#define CONFIG_ASSABET 1 /* on an Intel Assabet Board */
-
-#undef CONFIG_USE_IRQ
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_LAN91C96 /* we have an SMC9194 on-board */
-#define CONFIG_LAN91C96_BASE 0x18000000
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SA1100_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on Intel Assabet */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttySA0,115200n8 root=/dev/nfs ip=bootp"
-#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
-#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "Intel Assabet # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0000000 /* default load address */
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x0a /* set core clock to 206MHz */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */
-
-#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_RAMSTART
-#endif
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_SIZE PHYS_FLASH_SIZE
-#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
-#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max # of sectors on one chip */
-#undef CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-#define CONFIG_ENV_IN_OWN_SECTOR 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SECT_SIZE)
-#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE
-#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h
deleted file mode 100644
index 49c923f..0000000
--- a/include/configs/at91cap9adk.h
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stelian Pop <stelian.pop@leadtechdesign.com>
- * Lead Tech Design <www.leadtechdesign.com>
- *
- * Configuation settings for the AT91CAP9ADK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91CAP9 1 /* It's an Atmel AT91CAP9 SoC */
-#define CONFIG_AT91CAP9ADK 1 /* on an AT91CAP9ADK Board */
-#define CONFIG_ARCH_CPU_INIT
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/*
- * Hardware drivers
- */
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
-
-/* LCD */
-#define CONFIG_LCD 1
-#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO 1
-#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO 1
-#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define CONFIG_ATMEL_LCD 1
-#define CONFIG_ATMEL_LCD_BGR555 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
-
-/* LED */
-#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIN_PC29 /* this is the power led */
-#define CONFIG_GREEN_LED AT91_PIN_PA10 /* this is the user1 led */
-#define CONFIG_YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */
-
-#define CONFIG_BOOTDELAY 3
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_SOURCE
-
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
-
-/* SDRAM: Careful: this supposes an AT91CAP-MEM33 expansion card */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x70000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
-
-/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-/* NOR flash */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define PHYS_FLASH_1 0x10000000
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
-
-/* NAND flash */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-
-#endif
-
-/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_MULTI 1
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
-
-/* USB */
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91_BASE_UHP */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91cap9"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
-
-#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x73e00000
-
-#define CONFIG_SYS_USE_DATAFLASH 1
-#undef CONFIG_SYS_USE_NORFLASH
-
-#ifdef CONFIG_SYS_USE_DATAFLASH
-
-/* bootstrap + u-boot + env + linux in dataflash */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x72000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock1 " \
- "mtdparts=physmap-flash.0:-(nor);" \
- "atmel_nand:-(root) " \
- "rw rootfstype=jffs2"
-
-#else
-
-/* bootstrap + u-boot + env + linux in norflash */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_SYS_MONITOR_BASE (PHYS_FLASH_1 + 0x8000)
-#define CONFIG_ENV_OFFSET 0x4000
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4000
-#define CONFIG_BOOTCOMMAND "cp.b 0x10040000 0x72000000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock4 " \
- "mtdparts=physmap-flash.0:16k(bootstrap)ro,"\
- "16k(env),224k(uboot)ro,-(linux);" \
- "atmel_nand:-(root) " \
- "rw rootfstype=jffs2"
-
-#endif
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN ROUND(CONFIG_ENV_SIZE + 128*1024, 0x1000)
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
deleted file mode 100644
index 15de310..0000000
--- a/include/configs/at91rm9200dk.h
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * Rick Bronson <rick@efn.org>
- *
- * Configuration settings for the AT91RM9200DK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY 3
-/* #define CONFIG_ENV_OVERWRITE 1 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-
-#include <asm/arch/AT91RM9200.h> /* needed for port definitions */
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_AT91C_USE_RMII
-
-/* AC Characteristics */
-/* DLYBS = tCSS = 250ns min and DLYBCT = tCSH = 250ns */
-#define DATAFLASH_TCSS (0xC << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
-
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
-
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#undef CONFIG_ENV_IS_IN_DATAFLASH
-
-#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_ENV_OFFSET 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
-#else
-#define CONFIG_ENV_IS_IN_FLASH 1
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* between boot.bin and u-boot.bin.gz */
-#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
-#else
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x60000) /* after u-boot.bin */
-#define CONFIG_ENV_SIZE 0x10000 /* sectors are 64K here */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-#endif /* CONFIG_ENV_IS_IN_DATAFLASH */
-
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#ifdef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
-#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */
-#else
-#define CONFIG_SYS_BOOT_SIZE 0x00 /* 0 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE PHYS_FLASH_1
-#define CONFIG_SYS_U_BOOT_SIZE 0x60000 /* 384 KBytes */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h
index de74dcf..b08cbf2 100644
--- a/include/configs/at91sam9m10g45ek.h
+++ b/include/configs/at91sam9m10g45ek.h
@@ -27,48 +27,60 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <asm/hardware.h>
+
#define CONFIG_AT91_LEGACY
+#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#ifdef CONFIG_AT91SAM9M10G45EK
-#define CONFIG_AT91SAM9M10G45 1 /* It's an Atmel AT91SAM9M10G45 SoC*/
-#else
-#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC*/
-#endif
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
+#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_AT91SAM9M10G45EK
+#define CONFIG_AT91FAMILY
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_DISPLAY_CPUINFO
+
+/* general purpose I/O */
+#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
+#define CONFIG_AT91_GPIO
+#define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */
+
+/* serial console */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+
+/*
+ * This needs to be defined for the OHCI code to work but it is defined as
+ * ATMEL_ID_UHPHS in the CPU specific header files.
+ */
+#define ATMEL_ID_UHP ATMEL_ID_UHPHS
/*
- * Hardware drivers
+ * Specify the clock enable bit in the PMC_SCER register.
*/
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
/* LCD */
-#define CONFIG_LCD 1
+#define CONFIG_LCD
#define LCD_BPP LCD_COLOR8
-#define CONFIG_LCD_LOGO 1
+#define CONFIG_LCD_LOGO
#undef LCD_TEST_PATTERN
-#define CONFIG_LCD_INFO 1
-#define CONFIG_LCD_INFO_BELOW_LOGO 1
-#define CONFIG_SYS_WHITE_ON_BLACK 1
-#define CONFIG_ATMEL_LCD 1
-#define CONFIG_ATMEL_LCD_RGB565 1
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
+#define CONFIG_LCD_INFO
+#define CONFIG_LCD_INFO_BELOW_LOGO
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_ATMEL_LCD
+#define CONFIG_ATMEL_LCD_RGB565
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
/* board specific(not enough SRAM) */
#define CONFIG_AT91SAM9G45_LCD_BASE 0x73E00000
@@ -82,10 +94,10 @@
/*
* BOOTP options
*/
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
@@ -98,44 +110,29 @@
#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_LOADS
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_USB
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x70000000
-#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
-
-/* DataFlash */
-#ifdef CONFIG_ATMEL_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH 1
-#define CONFIG_SPI_FLASH_ATMEL 1
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#endif
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6
+#define CONFIG_SYS_SDRAM_SIZE 0x08000000
-/* NOR flash, if populated */
-#ifndef CONFIG_CMD_NAND
-#define CONFIG_SYS_NO_FLASH 1
-#else
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define PHYS_FLASH_1 0x10000000
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#endif
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
+
+/* No NOR flash */
+#define CONFIG_SYS_NO_FLASH
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_MAX_CHIPS 1
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_DBW_8
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
@@ -146,68 +143,52 @@
#endif
/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_MULTI 1
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
+#define CONFIG_RESET_PHY_R
/* USB */
#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
-#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* AT91SAM9G45_UHP_OHCI_BASE */
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
+#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_HCI
+#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x23e00000
+#define CONFIG_USB_STORAGE
-#ifdef CONFIG_SYS_USE_DATAFLASH
+#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-/* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_SPI_FLASH 1
-#define CONFIG_SYS_MONITOR_BASE (0xC0000000 + 0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (0xC0000000 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_ENV_SECT_SIZE 0x10000
-#define CONFIG_BOOTCOMMAND "cp.b 0xC0042000 0x22000000 0x210000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock0 " \
- "mtdparts=atmel_nand:-(root) "\
- "rw rootfstype=jffs2"
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END 0x23e00000
-#else /* CONFIG_SYS_USE_NANDFLASH */
-
-/* bootstrap + u-boot + env + linux in nandflash */
-#define CONFIG_ENV_IS_IN_NAND 1
+/* bootstrap + u-boot + env in nandflash */
+#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET 0x60000
#define CONFIG_ENV_OFFSET_REDUND 0x80000
-#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
-#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
-#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
- "root=/dev/mtdblock5 " \
- "mtdparts=atmel_nand:128k(bootstrap)ro, \
- 256k(uboot)ro,128k(env1)ro,128k(env2)ro, \
- 2M(linux),-(root) " \
- "rw rootfstype=jffs2"
-
-#endif
-
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_ENV_SIZE 0x20000
+
+#define CONFIG_BOOTCOMMAND "nand read 0x70000000 0x100000 0x200000;" \
+ "bootm 0x70000000"
+#define CONFIG_BOOTARGS \
+ "console=ttyS0,115200 earlyprintk " \
+ "root=/dev/mtdblock5 " \
+ "mtdparts=atmel_nand:128k(bootstrap)ro," \
+ "256k(uboot)ro,128k(env1)ro,128k(env2)ro," \
+ "2M@1M(linux),-(root) " \
+ "rw rootfstype=jffs2"
+
+#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_SYS_PROMPT "U-Boot> "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 16a5f5b..496a904 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -108,8 +108,9 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
/* DDR - I use Micron DDR */
diff --git a/include/configs/cmc_pu2.h b/include/configs/cmc_pu2.h
deleted file mode 100644
index a197635..0000000
--- a/include/configs/cmc_pu2.h
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * 2004-2005 Gary Jennejohn <garyj@denx.de>
- *
- * Configuration settings for the CMC PU2 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK/3) /* peripheral clock */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_CMC_PU2 1 /* on an CMC_PU2 Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x100032ad /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x2026BE04 /* 179,712 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Master Clock = 69.120MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x3399c1d4 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 9600
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#undef CONFIG_DBGU
-#define CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_HARD_I2C
-
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 0 /* not used */
-#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
-#define CONFIG_RTC_RS5C372A /* RICOH I2C RTC */
-#define CONFIG_SYS_I2C_RTC_ADDR 0x32
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
-#else
-#define CONFIG_TIMESTAMP
-#endif
-/* still about 20 kB free with this defined */
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_BOOTDELAY 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-
-#if defined(CONFIG_HARD_I2C)
- #define CONFIG_CMD_DATE
- #define CONFIG_CMD_EEPROM
- #define CONFIG_CMD_I2C
-#endif
-
-
-#define CONFIG_MISC_INIT_R
-#define CONFIG_SYS_LONGHELP
-
-#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x1000000 /* 16 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_AT91C_USE_RMII
-
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 2
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
-
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT (11 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT ( 2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_OFFSET 0x20000 /* after u-boot.bin */
-#define CONFIG_ENV_SECT_SIZE (64 << 10) /* sectors are 64 kB */
-#define CONFIG_ENV_SIZE (16 << 10) /* Use only 16 kB */
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
-
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK/2) /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "net_nfs=tftp ${loadaddr} ${bootfile};run nfsargs addip addcons " \
- "addmtd;bootm\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "net_cramfs=tftp ${loadaddr} ${bootfile}; run flashargs addip " \
- "addcons addmtd; bootm\0" \
- "flash_cramfs=run flashargs addip addcons addmtd; bootm 10030000\0" \
- "flashargs=setenv bootargs root=/dev/mtdblock3 ro\0" \
- "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
- "${hostname}::off\0" \
- "addcons=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0" \
- "addmtd=setenv bootargs ${bootargs} mtdparts=cmc_pu2:128k(uboot)ro," \
- "64k(environment),768k(linux),4096k(root),-\0" \
- "load=tftp ${loadaddr} ${loadfile}\0" \
- "update=protect off 10000000 1001ffff;erase 10000000 1001ffff; " \
- "cp.b ${loadaddr} 10000000 ${filesize};" \
- "protect on 10000000 1001ffff\0" \
- "updatel=era 10030000 100effff;tftp ${loadaddr} ${bootfile}; " \
- "cp.b ${loadaddr} 10030000 ${filesize}\0" \
- "updatec=era 100f0000 104effff;tftp ${loadaddr} ${cramfsimage}; " \
- "cp.b ${loadaddr} 100f0000 ${filesize}\0" \
- "updatej=era 104f0000 107fffff;tftp ${loadaddr} ${jffsimage}; " \
- "cp.b ${loadaddr} 104f0000 ${filesize}\0" \
- "cramfsimage=cramfs_cmc-pu2.img\0" \
- "jffsimage=jffs2_cmc-pu2.img\0" \
- "loadfile=u-boot_cmc-pu2.bin\0" \
- "bootfile=uImage_cmc-pu2\0" \
- "loadaddr=0x20800000\0" \
- "hostname=CMC-TC-PU2\0" \
- "bootcmd=run dhcp_start;run flash_cramfs\0" \
- "autoload=n\0" \
- "dhcp_start=echo no DHCP\0" \
- "ipaddr=192.168.0.190\0"
-#endif /* __CONFIG_H */
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
index dcfbc6e..934dfcd 100644
--- a/include/configs/csb226.h
+++ b/include/configs/csb226.h
@@ -141,7 +141,7 @@
/* ^^ Run Mode Speed = 2x Mem Speed */
/* ^^ Turbo Mode Sp. = 1x Run M. Sp. */
-#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */
+#define CONFIG_SYS_MONITOR_LEN 0x1c000 /* 112 KiB */
/* valid baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
diff --git a/include/configs/csb637.h b/include/configs/csb637.h
deleted file mode 100644
index 7a85d65..0000000
--- a/include/configs/csb637.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * (C) Copyright 2005 REA Elektronik GmbH <www.rea.de>
- * Anders Larsen <alarsen@rea.de>
- *
- * Configuation settings for the Cogent CSB637 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 184320000 /* from 3.6864 MHz crystal (3686400 * 50) */
-#define AT91C_MASTER_CLOCK 46080000 /* (AT91C_MAIN_CLOCK/4) peripheral clock */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_CSB637 1 /* on a CSB637 board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x2031BE01 /* 184.320000 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x128A3E19 /* 47.996928 MHz (divider by 2 for USB) */
-#define CONFIG_SYS_MCKR_VAL 0x00000302 /* PCK/4 = MCK Master Clock = 46.080000 MHz from PLLA */
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x21914159 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_SYS_AT91C_BRGR_DIVISOR 75 /* hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY 3
-/* #define CONFIG_ENV_OVERWRITE 1 */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x4000000 /* 64 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 512*1024 - 4
-#define CONFIG_SYS_ALT_MEMTEST 1
-#define CONFIG_SYS_MEMTEST_SCRATCH CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 4
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-#undef CONFIG_AT91C_USE_RMII
-
-#undef CONFIG_HAS_DATAFLASH
-#define CONFIG_SYS_SPI_WRITE_TOUT (5*CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 0
-#define CONFIG_SYS_MAX_DATAFLASH_PAGES 16384
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
-
-/*
- * FLASH Device configuration
- */
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_FLASH_CFI 1 /* flash is CFI conformant */
-#define CONFIG_FLASH_CFI_DRIVER 1 /* use common cfi driver */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max # of memory banks */
-#define CONFIG_SYS_FLASH_INCREMENT 0 /* there is only one bank */
-#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware flash protection */
-#define CONFIG_SYS_MAX_FLASH_SECT 64
-
-#define CONFIG_SYS_JFFS2_FIRST_BANK 0
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR 3
-#define CONFIG_SYS_JFFS2_NUM_BANKS 1
-
-#undef CONFIG_ENV_IS_IN_DATAFLASH
-
-#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_ENV_OFFSET 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x2000 /* 0x8000 */
-#else
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x20000) /* after u-boot.bin */
-#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */
-#endif /* CONFIG_ENV_IS_IN_DATAFLASH */
-
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h
index bbb5a9b..f6068a2 100644
--- a/include/configs/da850evm.h
+++ b/include/configs/da850evm.h
@@ -29,6 +29,7 @@
#define CONFIG_DRIVER_TI_EMAC
#define CONFIG_USE_SPIFLASH
+
/*
* SoC Configuration
*/
@@ -42,6 +43,9 @@
#define CONFIG_SYS_HZ 1000
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_TEXT_BASE 0xc1080000
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_L2CACHE_OFF
/*
* Memory Info
@@ -75,6 +79,7 @@
#define CONFIG_SPI
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_DAVINCI_SPI
#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
@@ -126,6 +131,22 @@
#define CONFIG_NET_MULTI
#endif
+#ifdef CONFIG_USE_NOR
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
+#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */
+#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3)
+#define CONFIG_ENV_SIZE (10 << 10) /* 10KB */
+#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
+#define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */
+#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
+ + 3)
+#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ
+#endif
+
#ifdef CONFIG_USE_SPIFLASH
#undef CONFIG_ENV_IS_IN_FLASH
#undef CONFIG_ENV_IS_IN_NAND
@@ -139,8 +160,9 @@
/*
* U-Boot general configuration
*/
+#define CONFIG_MISC_INIT_R
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT "DA850-evm > " /* Command Prompt */
+#define CONFIG_SYS_PROMPT "U-Boot > " /* Command Prompt */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
@@ -159,12 +181,14 @@
* Linux Information
*/
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
+#define CONFIG_HWCONFIG /* enable hwconfig */
#define CONFIG_CMDLINE_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTARGS \
"mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
#define CONFIG_BOOTDELAY 3
+#define CONFIG_EXTRA_ENV_SETTINGS "hwconfig=dsp:wake=yes"
/*
* U-Boot commands
diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h
index 2825050..28b9db9 100644
--- a/include/configs/davinci_dm365evm.h
+++ b/include/configs/davinci_dm365evm.h
@@ -33,6 +33,9 @@
#define CONFIG_SYS_HZ_CLOCK 24000000 /* timer0 freq */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM365
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_L2CACHE_OFF
/* Memory Info */
#define CONFIG_NR_DRAM_BANKS 1
@@ -166,7 +169,7 @@
/* U-Boot general configuration */
#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT "DM365 EVM # " /* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT "DM36x EVM # " /* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE /* Print buffer size */ \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h
index 45214fa..086a2d7 100644
--- a/include/configs/davinci_dvevm.h
+++ b/include/configs/davinci_dvevm.h
@@ -60,6 +60,9 @@
#define CONFIG_SYS_HZ_CLOCK 27000000 /* Timer Input clock freq */
#define CONFIG_SYS_HZ 1000
#define CONFIG_SOC_DM644X
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_L2CACHE_OFF
/*====================================================*/
/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */
/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index cf77606..710092d 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -98,8 +98,9 @@
115200}
/* MMC */
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
/* I2C */
@@ -181,6 +182,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"console=ttyS2,115200n8\0" \
+ "mmcdev=0\0" \
"vram=12M\0" \
"dvimode=1024x768MR-16@60\0" \
"defaultdisplay=dvi\0" \
@@ -213,10 +215,10 @@
"${kernelopts} " \
"dnsip1=${dnsip} " \
"dnsip2=${dnsip2}\0" \
- "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source ${loadaddr}\0" \
- "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
"eraseenv=nand unlock 0x260000 0x20000; nand erase 0x260000 0x20000\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
@@ -229,7 +231,7 @@
"dhcp ${loadaddr}; " \
"run netargs; " \
"bootm ${loadaddr}\0" \
- "autoboot=if mmc init 0; then " \
+ "autoboot=if mmc rescan ${mmcdev}; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
diff --git a/include/configs/dig297.h b/include/configs/dig297.h
index b68f073..0e05df3 100644
--- a/include/configs/dig297.h
+++ b/include/configs/dig297.h
@@ -97,8 +97,9 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
-#define CONFIG_MMC
-#define CONFIG_OMAP3_MMC
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION
/* DDR - I use Micron DDR */
diff --git a/include/configs/edb93xx.h b/include/configs/edb93xx.h
deleted file mode 100644
index 19b7632..0000000
--- a/include/configs/edb93xx.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * U-boot - Configuration file for Cirrus Logic EDB93xx boards
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#ifdef CONFIG_edb9301
-#define CONFIG_EDB9301
-#elif defined(CONFIG_edb9302)
-#define CONFIG_EDB9302
-#elif defined(CONFIG_edb9302a)
-#define CONFIG_EDB9302A
-#elif defined(CONFIG_edb9307)
-#define CONFIG_EDB9307
-#elif defined(CONFIG_edb9307a)
-#define CONFIG_EDB9307A
-#elif defined(CONFIG_edb9312)
-#define CONFIG_EDB9312
-#elif defined(CONFIG_edb9315)
-#define CONFIG_EDB9315
-#elif defined(CONFIG_edb9315a)
-#define CONFIG_EDB9315A
-#else
-#error "no board defined"
-#endif
-
-/* Initial environment and monitor configuration options. */
-#define CONFIG_BOOTDELAY 2
-#define CONFIG_CMDLINE_TAG 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_BOOTARGS "root=/dev/nfs console=ttyAM0,115200 ip=dhcp"
-#define CONFIG_BOOTFILE "edb93xx.img"
-
-#define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#ifdef CONFIG_EDB9301
-#define CONFIG_EP9301
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9301
-#define CONFIG_SYS_PROMPT "EDB9301> "
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#elif defined(CONFIG_EDB9302)
-#define CONFIG_EP9302
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302
-#define CONFIG_SYS_PROMPT "EDB9302> "
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#elif defined(CONFIG_EDB9302A)
-#define CONFIG_EP9302
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9302A
-#define CONFIG_SYS_PROMPT "EDB9302A> "
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-#elif defined(CONFIG_EDB9307)
-#define CONFIG_EP9307
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307
-#define CONFIG_SYS_PROMPT "EDB9307> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9307A)
-#define CONFIG_EP9307
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9307A
-#define CONFIG_SYS_PROMPT "EDB9307A> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9312)
-#define CONFIG_EP9312
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9312
-#define CONFIG_SYS_PROMPT "EDB9312> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9315)
-#define CONFIG_EP9315
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315
-#define CONFIG_SYS_PROMPT "EDB9315> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#elif defined(CONFIG_EDB9315A)
-#define CONFIG_EP9315
-#define CONFIG_MACH_TYPE MACH_TYPE_EDB9315A
-#define CONFIG_SYS_PROMPT "EDB9315A> "
-#define CONFIG_ENV_SECT_SIZE 0x00040000
-#else
-#error "no board defined"
-#endif
-
-/* High-level configuration options */
-#define CONFIG_ARM920T 1 /* This is an ARM920T core... */
-#define CONFIG_EP93XX 1 /* in a Cirrus Logic 93xx SoC */
-
-#define CONFIG_SYS_CLK_FREQ 14745600 /* EP93xx has a 14.7456 clock */
-#define CONFIG_SYS_HZ 1000 /* decr freq: 1 ms ticks */
-#undef CONFIG_USE_IRQ /* Don't need IRQ/FIQ */
-
-/* Monitor configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-
-#undef CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-
-#define CONFIG_SYS_LONGHELP /* Enable "long" help in mon */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
-/* Print buffer size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-/* Boot argument buffer size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_MAXARGS 16 /* Max number of command args */
-
-/* Serial port hardware configuration */
-#define CONFIG_PL010_SERIAL
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
-#define CONFIG_SYS_SERIAL0 0x808C0000
-#define CONFIG_SYS_SERIAL1 0x808D0000
-#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
- (void *)CONFIG_SYS_SERIAL1}
-
-/* Status LED */
-#define CONFIG_STATUS_LED 1 /* Status LED enabled */
-#define CONFIG_BOARD_SPECIFIC_LED 1
-#define STATUS_LED_GREEN 0
-#define STATUS_LED_RED 1
-/* Green */
-#define STATUS_LED_BIT STATUS_LED_GREEN
-#define STATUS_LED_STATE STATUS_LED_ON
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-/* Red */
-#define STATUS_LED_BIT1 STATUS_LED_RED
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2)
-/* Optional value */
-#define STATUS_LED_BOOT STATUS_LED_BIT
-
-/* Network hardware configuration */
-#define CONFIG_DRIVER_EP93XX_MAC
-#define CONFIG_MII_SUPPRESS_PREAMBLE
-#define CONFIG_MII
-#define CONFIG_PHY_ADDR 1
-#define CONFIG_NET_MULTI
-#undef CONFIG_NETCONSOLE
-
-/* SDRAM configuration */
-#if defined(CONFIG_EDB9301) || defined(CONFIG_EDB9302)
-/*
- * EDB9301/2 has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
- * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
- * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
- */
-#define CONFIG_NR_DRAM_BANKS 4
-#define PHYS_SDRAM_1 0x00000000
-#define PHYS_SDRAM_SIZE_1 0x00800000
-#define PHYS_SDRAM_2 0x01000000
-#define PHYS_SDRAM_SIZE_2 0x00800000
-#define PHYS_SDRAM_3 0x04000000
-#define PHYS_SDRAM_SIZE_3 0x00800000
-#define PHYS_SDRAM_4 0x05000000
-#define PHYS_SDRAM_SIZE_4 0x00800000
-#define CONFIG_EDB93XX_SDCS3
-#define CONFIG_SYS_MEMTEST_START 0x00100000
-#define CONFIG_SYS_MEMTEST_END 0x007fffff
-
-#elif defined(CONFIG_EDB9302A)
-/*
- * EDB9302a has 4 banks of SDRAM consisting of 1x Samsung K4S561632E-TC75
- * 256 Mbit SDRAM on a 16-bit data bus, for a total of 32MB of SDRAM. We set
- * the SROMLL bit on the processor, resulting in this non-contiguous memory map.
- */
-#define CONFIG_NR_DRAM_BANKS 4
-#define PHYS_SDRAM_1 0xc0000000
-#define PHYS_SDRAM_SIZE_1 0x00800000
-#define PHYS_SDRAM_2 0xc1000000
-#define PHYS_SDRAM_SIZE_2 0x00800000
-#define PHYS_SDRAM_3 0xc4000000
-#define PHYS_SDRAM_SIZE_3 0x00800000
-#define PHYS_SDRAM_4 0xc5000000
-#define PHYS_SDRAM_SIZE_4 0x00800000
-#define CONFIG_EDB93XX_SDCS0
-#define CONFIG_SYS_MEMTEST_START 0xc0100000
-#define CONFIG_SYS_MEMTEST_END 0xc07fffff
-
-#elif defined(CONFIG_EDB9307) || defined CONFIG_EDB9312 || \
- defined(CONFIG_EDB9315)
-/*
- * The EDB9307, EDB9312, and EDB9315 have 2 banks of SDRAM consisting of
- * 2x Samsung K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of
- * 64 MB of SDRAM.
- */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_1 0x00000000
-#define PHYS_SDRAM_SIZE_1 0x02000000
-#define PHYS_SDRAM_2 0x04000000
-#define PHYS_SDRAM_SIZE_2 0x02000000
-#define CONFIG_EDB93XX_SDCS3
-#define CONFIG_SYS_MEMTEST_START 0x00100000
-#define CONFIG_SYS_MEMTEST_END 0x01e00000
-
-#elif defined(CONFIG_EDB9307A) || defined(CONFIG_EDB9315A)
-/*
- * The EDB9307A and EDB9315A have 2 banks of SDRAM consisting of 2x Samsung
- * K4S561632E-TC75 256 Mbit on a 32-bit data bus, for a total of 64 MB of SDRAM.
- */
-#define CONFIG_NR_DRAM_BANKS 2
-#define PHYS_SDRAM_1 0xc0000000
-#define PHYS_SDRAM_SIZE_1 0x02000000
-#define PHYS_SDRAM_2 0xc4000000
-#define PHYS_SDRAM_SIZE_2 0x02000000
-#define CONFIG_EDB93XX_SDCS0
-#define CONFIG_SYS_MEMTEST_START 0xc0100000
-#define CONFIG_SYS_MEMTEST_END 0xc1e00000
-#endif
-
-/* Default load address */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x01000000)
-
-/* Must match kernel config */
-#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
-
-/* Run-time memory allocatons */
-#define CONFIG_STACKSIZE (128 * 1024)
-
-#if defined(CONFIG_USE_IRQ)
-#define CONFIG_STACKSIZE_IRQ (4 * 1024)
-#define CONFIG_STACKSIZE_FIQ (4 * 1024)
-#endif
-
-#define CONFIG_SYS_MALLOC_LEN (512 * 1024)
-
-/* -----------------------------------------------------------------------------
- * FLASH and environment organization
- *
- * The EDB9301 and EDB9302(a) have 1 bank of flash memory at 0x60000000
- * consisting of 1x Intel TE28F128J3C-150 128 Mbit flash on a 16-bit data bus,
- * for a total of 16 MB of CFI-compatible flash.
- *
- * The EDB9307(a), EDB9312, and EDB9315(a) have 1 bank of flash memory at
- * 0x60000000 consisting of 2x Micron MT28F128J3-12 128 Mbit flash on a 32-bit
- * data bus, for a total of 32 MB of CFI-compatible flash.
- *
- * EDB9301/02(a) EDB9307(a)/12/15(a)
- * 0x60000000 - 0x0003FFFF u-boot u-boot
- * 0x60040000 - 0x0005FFFF environment #1 environment #1
- * 0x60060000 - 0x0007FFFF environment #2 environment #1 (continued)
- * 0x60080000 - 0x0009FFFF unused environment #2
- * 0x600A0000 - 0x000BFFFF unused environment #2 (continued)
- * 0x600C0000 - 0x00FFFFFF unused unused
- * 0x61000000 - 0x01FFFFFF not present unused
- */
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-
-#define PHYS_FLASH_1 0x60000000
-#define CONFIG_SYS_FLASH_BASE (PHYS_FLASH_1)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-#define CONFIG_ENV_OVERWRITE /* Vendor params unprotected */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR 0x60040000
-
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#endif /* !defined (__CONFIG_H) */
diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index 7d3363a..b90e342 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -40,8 +40,6 @@
#define CONFIG_SYS_TEXT_BASE 0x97800000
-#define CONFIG_SYS_L2CACHE_OFF
-
/*
* Bootloader Components Configuration
*/
diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h
index 1131db0..b7f1cb3 100644
--- a/include/configs/imx31_litekit.h
+++ b/include/configs/imx31_litekit.h
@@ -63,6 +63,7 @@
#define CONFIG_MXC_UART 1
#define CONFIG_SYS_MX31_UART1 1
+#define CONFIG_MXC_GPIO
#define CONFIG_HARD_SPI 1
#define CONFIG_MXC_SPI 1
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 32ff193..3b983af 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -30,6 +30,9 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+
+#define CONFIG_INTEGRATOR
+#define CONFIG_ARCH_INTEGRATOR
/*
* High Level Configuration Options
* (easy to change)
@@ -47,7 +50,7 @@
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_CM_INIT 1
#define CONFIG_CM_REMAP 1
-#undef CONFIG_CM_SPD_DETECT
+#define CONFIG_CM_SPD_DETECT
/*
* Size of malloc() pool
@@ -81,20 +84,28 @@
* Command line configuration.
*/
+
#define CONFIG_CMD_IMI
#define CONFIG_CMD_BDI
+#define CONFIG_CMD_BOOTD
#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMLS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
#define CONFIG_BOOTDELAY 2
-#define CONFIG_BOOTARGS "root=/dev/mtdblock0 mem=32M console=ttyAM0 console=tty"
+#define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAM0 console=tty"
#define CONFIG_BOOTCOMMAND ""
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT "Integrator-AP # " /* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "# "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
@@ -120,6 +131,12 @@
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_FLASH_BASE 0x24000000
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 2c8ca2d..e9b68c6 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -31,6 +31,8 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_INTEGRATOR
+#define CONFIG_ARCH_INTEGRATOR
/*
* High Level Configuration Options
* (easy to change)
@@ -140,6 +142,12 @@ SIB at Block62 End Block62 address 0x24f80000
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE 0x08000000 /* 128 MB */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE PHYS_SDRAM_1_SIZE
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
/*-----------------------------------------------------------------------
* FLASH and environment organization
diff --git a/include/configs/kb9202.h b/include/configs/kb9202.h
deleted file mode 100644
index cfb7cea..0000000
--- a/include/configs/kb9202.h
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * Rick Bronson <rick@efn.org>
- *
- * Configuation settings for the AT91RM9200DK board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Adatped for KwikByte KB920x board from at91rm9200dk.h: 22APR2005
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-#define AT91C_MAIN_CLOCK 180000000 /* from 10 MHz crystal */
-#define AT91C_MASTER_CLOCK 60000000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
-
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-/* Only define one of the following, based on board type */
-/* #define CONFIG_KB9200 1 KwikByte KB9202 board */
-/* #define CONFIG_KB9201 1 KwikByte KB9202 board */
-#define CONFIG_KB9202 1 /* KwikByte KB9202 board */
-
-#define CONFIG_KB920x 1 /* Any KB920x board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define USE_920T_MMU 1
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-#define CONFIG_SYS_LONGHELP
-
-#ifndef roundup
-#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
-#endif
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (roundup(CONFIG_ENV_SIZE,4096) + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * Hardware drivers
- */
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ENV_OVERWRITE 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_MISC
-
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - (512*1024)
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-
-#define CONFIG_SYS_FLASH_BASE 0x10000000
-
-#ifdef CONFIG_KB9202
-#define PHYS_FLASH_SIZE 0x1000000
-#else
-#define PHYS_FLASH_SIZE 0x200000
-#endif
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-
-#define CONFIG_HARD_I2C
-
-#define CONFIG_ENV_IS_IN_EEPROM
-
-#ifdef CONFIG_KB9202
-#define CONFIG_ENV_OFFSET 0x3E00
-#define CONFIG_ENV_SIZE 0x0200
-#else
-#define CONFIG_ENV_OFFSET 0x1000
-#define CONFIG_ENV_SIZE 0x1000
-#endif
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0 /* not used */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-
-#ifndef __ASSEMBLY__
-/*-----------------------------------------------------------------------
- * Board specific extension for bd_info
- *
- * This structure is embedded in the global bd_info (bd_t) structure
- * and can be used by the board specific code (eg board/...)
- */
-
-struct bd_info_ext {
- /* helper variable for board environment handling
- *
- * env_crc_valid == 0 => uninitialised
- * env_crc_valid > 0 => environment crc in flash is valid
- * env_crc_valid < 0 => environment crc in flash is invalid
- */
- int env_crc_valid;
-};
-#endif
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2 /* AT91C_TC0_CMR is implicitly set to */
- /* AT91C_TC_TIMER_DIV1_CLOCK */
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
diff --git a/include/configs/lpd7a400-10.h b/include/configs/lpd7a400-10.h
deleted file mode 100644
index 91bf1fa..0000000
--- a/include/configs/lpd7a400-10.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Logic LH7A400-10 card engine
- */
-
-#ifndef __LPD7A400_10_H
-#define __LPD7A400_10_H
-
-
-#define CONFIG_ARM920T 1 /* arm920t core */
-#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */
-#define CONFIG_LH7A400 1 /* Sharp LH7A400 S0C */
-
-/* The system clock PLL input frequency */
-#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
-
-/* ticks per second */
-#define CONFIG_SYS_HZ (508469)
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/*----------------------------------------------------------------------
- * Using SMC91C111 LAN chip
- *
- * Default IO base of chip is 0x300, Card Engine has this address lines
- * (LAN chip) tied to Vcc, so we just care about the chip select
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE (0x70000000)
-#undef CONFIG_SMC_USE_32_BIT
-
-#endif /* __LPD7A400_10_H */
diff --git a/include/configs/lpd7a400.h b/include/configs/lpd7a400.h
deleted file mode 100644
index 06f3d7e..0000000
--- a/include/configs/lpd7a400.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LPD7A400_H_
-#define __LPD7A400_H_
-
-#define CONFIG_LPD7A400 /* Logic LH7A400 SDK */
-
-#undef CONFIG_USE_IRQ
-
-/*
- * This board uses the logic LH7A400-10 card engine
- */
-#include <configs/lpd7a400-10.h>
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LH7A40X_SERIAL
-#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_IPADDR 192.168.1.100
-#define CONFIG_NETMASK 255.255.1.0
-#define CONFIG_SERVERIP 192.168.1.1
-
-#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifndef USE_920T_MMU
- #define CONFIG_CMD_PING
- #undef CONFIG_CMD_CACHE
-#else
- #define CONFIG_CMD_DATE
-#endif
-
-
-#define CONFIG_BOOTDELAY 3
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "LPD7A400> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/* size and location of u-boot in flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256<<10)
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000)
-#define CONFIG_ENV_SIZE 0x40000
-
-#endif /* __LPD7A400_H_ */
diff --git a/include/configs/lpd7a404-10.h b/include/configs/lpd7a404-10.h
deleted file mode 100644
index b10e69d..0000000
--- a/include/configs/lpd7a404-10.h
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Logic LH7A400-10 card engine
- */
-
-#ifndef __LPD7A404_10_H
-#define __LPD7A404_10_H
-
-
-#define CONFIG_ARM920T 1 /* arm920t core */
-#define CONFIG_LH7A40X 1 /* Sharp LH7A40x SoC family */
-#define CONFIG_LH7A404 1 /* Sharp LH7A404 SoC */
-
-/* The system clock PLL input frequency */
-#define CONFIG_SYS_CLK_FREQ 14745600 /* System Clock PLL Input (Hz) */
-
-/* ticks per second */
-#define CONFIG_SYS_HZ (508469)
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xc0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/*----------------------------------------------------------------------
- * Using SMC91C111 LAN chip
- *
- * Default IO base of chip is 0x300, Card Engine has this address lines
- * (LAN chip) tied to Vcc, so we just care about the chip select
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE (0x70000000)
-#undef CONFIG_SMC_USE_32_BIT
-
-#endif /* __LPD7A404_10_H */
diff --git a/include/configs/lpd7a404.h b/include/configs/lpd7a404.h
deleted file mode 100644
index 7535f62..0000000
--- a/include/configs/lpd7a404.h
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __LPD7A404_H_
-#define __LPD7A404_H_
-
-#define CONFIG_LPD7A404 /* Logic LH7A400 SDK */
-
-#undef CONFIG_USE_IRQ
-
-/*
- * This board uses the logic LH7A404-10 card engine
- */
-#include <configs/lpd7a404-10.h>
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * select serial console configuration
- */
-#define CONFIG_LH7A40X_SERIAL
-#define CONFIG_CONSOLE_UART2 /* UART2 LH7A40x for console */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_IPADDR 192.168.1.100
-#define CONFIG_NETMASK 255.255.1.0
-#define CONFIG_SERVERIP 192.168.1.1
-
-#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#ifndef USE_920T_MMU
- #define CONFIG_CMD_PING
- #undef CONFIG_CMD_CACHE
-#else
- #define CONFIG_CMD_DATE
-#endif
-
-
-#define CONFIG_BOOTDELAY 3
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "LPD7A404> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xc0300000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xc0500000 /* 2 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xc0f00000 /* default load address */
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/* size and location of u-boot in flash */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN (256<<10)
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xFC0000)
-#define CONFIG_ENV_SIZE 0x40000
-
-#endif /* __LPD7A404_H_ */
diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h
deleted file mode 100644
index 68f0415..0000000
--- a/include/configs/m501sk.h
+++ /dev/null
@@ -1,228 +0,0 @@
-/*
- * Based on Modifications by Alan Lu / Artila and
- * Rick Bronson <rick@efn.org>
- *
- * Configuration settings for the Artila M-501 starter kit,
- * with V02 processor card.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_AT91_LEGACY
-
-/* ARM asynchronous clock */
-/* from 18.432 MHz crystal (18432000 / 4 * 39) */
-#define AT91C_MAIN_CLOCK 179712000
-/* Perip clock (AT91C_MASTER_CLOCK / 3) */
-#define AT91C_MASTER_CLOCK 59904000
-#define AT91_SLOW_CLOCK 32768 /* slow clock */
-
-#define CONFIG_AT91RM9200 1 /* It's an Atmel AT91RM9200 SoC */
-#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_MENUPROMPT "."
-/*
- * LowLevel Init
- */
-#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1
-/* flash */
-#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000
-#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */
-
-/* clocks */
-#define CONFIG_SYS_PLLAR_VAL 0x20263E04 /* 179.712000 MHz for PCK */
-#define CONFIG_SYS_PLLBR_VAL 0x10483E0E /* 48.054857 MHz (divider by 2 for USB) */
-/* PCK/3 = MCK Master Clock = 59.904000MHz from PLLA */
-#define CONFIG_SYS_MCKR_VAL 0x00000202
-
-/* sdram */
-#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* Configure PIOC as peripheral (D16/D31) */
-#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000
-#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000
-#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_CR_VAL 0x2188c155 /* set up the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM 0x20000000 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to CONFIG_SYS_SDRAM */
-#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */
-#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */
-#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */
-#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */
-#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_BAUDRATE 115200
-
-/* Hardcode so no __divsi3 : AT91C_MASTER_CLOCK / baudrate / 16 */
-#define CONFIG_SYS_AT91C_BRGR_DIVISOR 33
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_FLASH_CFI_DRIVER 1
-#define CONFIG_ENV_SECT_SIZE 0x20000
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_PROTECTION /*for Intel P30 Flash*/
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100
-#define CONFIG_SYS_I2C_SLAVE 0
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-#undef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
-#define CONFIG_SYS_EEPROM_AT24C16
-#define CONFIG_SYS_I2C_RTC_ADDR 0x32
-#undef CONFIG_RTC_DS1338
-#define CONFIG_RTC_RS5C372A
-#undef CONFIG_POST
-#define CONFIG_M501SK
-#define CONFIG_CMC_PU2
-
-/* define one of these to choose the DBGU, USART0 or USART1 as console */
-#define CONFIG_AT91RM9200_USART
-#define CONFIG_DBGU
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-
-#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
-#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
-
-#define CONFIG_BOOTARGS "mem=32M console=ttyS0,115200 " \
- "initrd=0x20800000,8192000 ramdisk_size=15360 " \
- "root=/dev/ram0 rw mtdparts=phys_mapped_flash:" \
- "128k(loader)ro,128k(reserved)ro,1408k(linux)" \
- "ro,2560k(ramdisk)ro,-(userdisk)"
-#define CONFIG_BOOTCOMMAND "bootm 10040000 101a0000"
-#define CONFIG_BOOTDELAY 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_IPADDR 192.168.1.100
-#define CONFIG_SERVERIP 192.168.1.1
-#define CONFIG_GATEWAYIP 192.168.1.254
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_BOOTFILE uImage
-#define CONFIG_ETHADDR 00:13:48:aa:bb:cc
-#define CONFIG_ENV_OVERWRITE 1
-#define BOARD_LATE_INIT
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "unlock=yes\0"
-
-#define CONFIG_CMD_JFFS2
-#undef CONFIG_CMD_EEPROM
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_POST
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_SAVEENV
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_PROMPT_HUSH_PS2 ">>"
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 0 /* Max number of NAND devices */
-
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x2000000 /* 32 megs */
-
-#define CONFIG_SYS_MEMTEST_START 0x21000000 /* PHYS_SDRAM */
-/* CONFIG_SYS_MEMTEST_START + PHYS_SDRAM_SIZE - 262144 */
-#define CONFIG_SYS_MEMTEST_END 0x00100000
-
-#define CONFIG_NET_MULTI 1
-#ifdef CONFIG_NET_MULTI
-#define CONFIG_DRIVER_AT91EMAC 1
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#else
-#define CONFIG_DRIVER_ETHER 1
-#endif
-#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_AT91C_USE_RMII
-
-#define PHYS_FLASH_1 0x10000000
-#define PHYS_FLASH_SIZE 0x800000 /* 8 megs main flash */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 256
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#ifdef CONFIG_ENV_IS_IN_DATAFLASH
-#define CONFIG_ENV_OFFSET 0x20000
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x2000
-#else
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x00020000)
-#define CONFIG_ENV_SIZE 2048
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_EEPROM
-#define CONFIG_ENV_OFFSET 1024
-#define CONFIG_ENV_SIZE 1024
-#endif
-
-#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */
-
-/* use for protect flash sectors */
-#define CONFIG_SYS_BOOT_SIZE 0x6000 /* 24 KBytes */
-#define CONFIG_SYS_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
-#define CONFIG_SYS_U_BOOT_SIZE 0x10000 /* 64 KBytes */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 115200 , 19200, 38400, 57600, 9600 }
-
-#define CONFIG_SYS_PROMPT "U-Boot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-
-#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_HZ_CLOCK AT91C_MASTER_CLOCK/2
-
-#define CONFIG_STACKSIZE (32*1024) /* regular stack */
-
-#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
-#endif
-
-#endif
diff --git a/include/configs/meesc.h b/include/configs/meesc.h
index a27b36b..e100cb4 100644
--- a/include/configs/meesc.h
+++ b/include/configs/meesc.h
@@ -3,7 +3,7 @@
* Stelian Pop <stelian.pop@leadtechdesign.com>
* Lead Tech Design <www.leadtechdesign.com>
*
- * (C) Copyright 2009-2010
+ * (C) Copyright 2009-2011
* Daniel Gorsulowski <daniel.gorsulowski@esd.eu>
* esd electronic system design gmbh <www.esd.eu>
*
@@ -31,49 +31,68 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-/* Common stuff */
-#define CONFIG_MEESC 1 /* Board is esd MEESC */
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91SAM9263 1 /* It's an AT91SAM9263 SoC */
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
+
+/*
+ * Warning: changing CONFIG_SYS_TEXT_BASE requires
+ * adapting the initial boot program.
+ * Since the linker has to swallow that define, we must use a pure
+ * hex number here!
+ */
+#define CONFIG_SYS_TEXT_BASE 0x20002000
+
+/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* 32.768 kHz crystal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000/* 16.0 MHz crystal */
#define CONFIG_SYS_HZ 1000 /* decrementer freq */
-#define CONFIG_DISPLAY_BOARDINFO 1
-#define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info and speed */
-#define CONFIG_PREBOOT /* enable preboot variable */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_SERIAL_TAG 1
-#define CONFIG_REVISION_TAG 1
-#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */
+/* Misc CPU related */
#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f() */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_SERIAL_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_MISC_INIT_R /* Call misc_init_r */
+#undef CONFIG_USE_IRQ /* don't need IRQ/FIQ stuff */
-#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_BOARDINFO /* call checkboard() */
+#define CONFIG_DISPLAY_CPUINFO /* display cpu info and speed */
+#define CONFIG_PREBOOT /* enable preboot variable */
/*
* Hardware drivers
*/
+/* required until arch/arm/include/asm/arch-at91/at91sam9263.h is reworked */
+#define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP
+
+/* general purpose I/O */
+#define CONFIG_AT91_GPIO
+
/* Console output */
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200, 19200, 38400, 57600, 9600}
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK 1
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
/*
* BOOTP options
*/
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
@@ -84,97 +103,112 @@
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_NAND 1
-#define CONFIG_CMD_USB 1
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_USB
/* LED */
-#define CONFIG_AT91_LED 1
+#define CONFIG_AT91_LED
-/* SDRAM */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
+/*
+ * SDRAM: 1 bank, min 32, max 128 MB
+ * Initialized before u-boot gets started.
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_SDRAM_BASE 0x20000000 /* ATMEL_BASE_CS1 */
+#define CONFIG_SYS_SDRAM_SIZE 0x02000000
+
+#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x00100000)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01E00000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00100000)
+
+/*
+ * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
+ * leaving the correct space for initial global data structure above
+ * that address while providing maximum stack area below.
+ */
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (ATMEL_BASE_SRAM0 + 0x1000 - GENERATED_GBL_DATA_SIZE)
/* DataFlash */
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_HAS_DATAFLASH 1
-#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
-#define AT91_SPI_CLK 15000000
-#define DATAFLASH_TCSS (0x1a << 16)
-#define DATAFLASH_TCHS (0x1 << 24)
+#ifdef CONFIG_SYS_USE_DATAFLASH
+# define CONFIG_ATMEL_DATAFLASH_SPI
+# define CONFIG_HAS_DATAFLASH
+# define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
+# define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
+# define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* CS0 */
+# define AT91_SPI_CLK 15000000
+# define DATAFLASH_TCSS (0x1a << 16)
+# define DATAFLASH_TCHS (0x1 << 24)
+#endif
/* NOR flash is not populated, disable it */
-#define CONFIG_SYS_NO_FLASH 1
+#define CONFIG_SYS_NO_FLASH
/* NAND flash */
#ifdef CONFIG_CMD_NAND
-#define CONFIG_NAND_ATMEL
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
-/* our ALE is AD21 */
-#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
-/* our CLE is AD22 */
-#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
-#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+# define CONFIG_NAND_ATMEL
+# define CONFIG_SYS_MAX_NAND_DEVICE 1
+# define CONFIG_SYS_NAND_BASE 0x40000000 /* ATMEL_BASE_CS3 */
+# define CONFIG_SYS_NAND_DBW_8
+# define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
+# define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
+# define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
+# define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 22
+# define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
#endif
/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_MULTI 1
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
+#define CONFIG_FIT
#define CONFIG_NET_RETRY_COUNT 20
#undef CONFIG_RESET_PHY_R
/* USB */
#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00a00000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END 0x21e00000
-
-#define CONFIG_SYS_USE_DATAFLASH 1
-#undef CONFIG_SYS_USE_NANDFLASH
/* CAN */
-#define CONFIG_AT91_CAN 1
+#define CONFIG_AT91_CAN
/* hw-controller addresses */
-#define CONFIG_ET1100_BASE 0x70000000
+#define CONFIG_ET1100_BASE 0x70000000
+
+#ifdef CONFIG_SYS_USE_DATAFLASH
/* bootstrap + u-boot + env in dataflash on CS0 */
-#define CONFIG_ENV_IS_IN_DATAFLASH 1
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
+# define CONFIG_ENV_IS_IN_DATAFLASH
+# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
0x8400)
-#define CONFIG_ENV_OFFSET 0x4200
-#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
+# define CONFIG_ENV_OFFSET 0x4200
+# define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 + \
CONFIG_ENV_OFFSET)
-#define CONFIG_ENV_SIZE 0x4200
+# define CONFIG_ENV_SIZE 0x4200
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
+#elif CONFIG_SYS_USE_NANDFLASH
+
+/* bootstrap + u-boot + env + linux in nandflash */
+# define CONFIG_ENV_IS_IN_NAND 1
+# define CONFIG_ENV_OFFSET 0xC0000
+# define CONFIG_ENV_SIZE 0x20000
+
+#endif
#define CONFIG_SYS_PROMPT "=> "
-#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
/*
* Size of malloc() pool
@@ -185,7 +219,7 @@
#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
#ifdef CONFIG_USE_IRQ
-#error CONFIG_USE_IRQ not supported
+# error CONFIG_USE_IRQ not supported
#endif
#endif
diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
deleted file mode 100644
index ddbc65a..0000000
--- a/include/configs/mx1fs2.h
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- * Copyright (C) 2004 Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_ARM920T 1 /* this is an ARM920T CPU */
-#define CONFIG_IMX 1 /* in a Motorola MC9328MXL Chip */
-#define CONFIG_MX1FS2 1 /* on a mx1fs2 board */
-#undef CONFIG_USE_IRQ /* don't need use IRQ/FIQ */
-
-/*
- * Select serial console configuration
- */
-#undef _CONFIG_UART1 /* internal uart 1 */
-#define _CONFIG_UART2 /* internal uart 2 */
-#undef _CONFIG_UART3 /* internal uart 3 */
-#undef _CONFIG_UART4 /* internal uart 4 */
-#undef CONFIG_SILENT_CONSOLE /* use this to disable output */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_JFFS2
-
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_SOURCE
-
-/*
- * Boot options. Setting delay to -1 stops autostart count down.
- */
-#define CONFIG_BOOTDELAY 10
-#define CONFIG_BOOTARGS "root=/dev/mtdblock4 console=ttySMX0,115200n8 rootfstype=jffs2"
-#define CONFIG_BOOTCOMMAND "bootm 10080000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-/*
- * General options for u-boot. Modify to save memory foot print
- */
-#define CONFIG_SYS_LONGHELP /* undef saves memory */
-#define CONFIG_SYS_PROMPT "mx1fs2> " /* prompt string */
-#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */
-#define CONFIG_SYS_MAXARGS 16 /* max command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */
-
-#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */
-#define CONFIG_SYS_MEMTEST_END 0x08F00000
-
-#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */
-#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#define CONFIG_BAUDRATE 115200
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
-#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
-#define CONFIG_INITRD_TAG 1 /* send initrd params */
-
-/*
- * Malloc pool need to host env + 128 Kb reserve for other allocations.
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
-
-#define CONFIG_STACKSIZE (120<<10) /* stack size */
-
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4<<10) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4<<10) /* FIQ stack */
-#endif
-
-/* SDRAM Setup Values
- * 0x910a8300 Precharge Command CAS 3
- * 0x910a8200 Precharge Command CAS 2
- *
- * 0xa10a8300 AutoRefresh Command CAS 3
- * 0xa10a8200 Set AutoRefresh Command CAS 2
- */
-#define PRECHARGE_CMD 0x910a8300
-#define AUTOREFRESH_CMD 0xa10a8300
-
-#define BUS32BIT_VERSION
-/*
- * SDRAM Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
-#define MX1FS2_SDRAM_1 0x08000000 /* SDRAM bank #1 */
-#ifdef BUS32BIT_VERSION
-#define MX1FS2_SDRAM_1_SIZE (0x04000000 - 0x100000) /* 64 MB - 1M Framebuffer */
-#else
-#define MX1FS2_SDRAM_1_SIZE (0x01FC0000 - 0x100000) /* 32 MB - 1M Framebuffer */
-#endif
-/*
- * Flash Controller settings
- */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
-#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
-
-#ifdef BUS32BIT_VERSION
-#define MX1FS2_FLASH_BUS_WIDTH 4 /* we use 32 bit FLASH memory... */
-#define MX1FS2_FLASH_INTERLEAVE 2 /* ... made of 2 chips */
-#define MX1FS2_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank*/
-#define MX1FS2_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
-#else
-#define MX1FS2_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
-#define MX1FS2_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
-#define MX1FS2_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank*/
-#define MX1FS2_FLASH_SECT_SIZE 0x00010000 /* size of erase sector */
-#endif
-#define MX1FS2_FLASH_BASE 0x10000000 /* location of flash memory */
-#define MX1FS2_FLASH_UNLOCK 1 /* perform hw unlock first */
-
-/* This should be defined if CFI FLASH device is present. Actually benefit
- is not so clear to me. In other words we can provide more informations
- to user, but this expects more complex flash handling we do not provide
- now.*/
-#undef CONFIG_SYS_FLASH_CFI
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Erase operation */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* timeout for Write operation */
-
-#define CONFIG_SYS_FLASH_BASE MX1FS2_FLASH_BASE
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * Right now there is no gain for user, but later on booting kernel might be
- * possible. Consider using XIP kernel running from flash to save RAM
- * footprint.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-
-/*
- * JFFS2 partitions
- */
-/* No command line, one static partition, whole device */
-/*
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00050000
-*/
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=mx1fs2-0"
-
-#ifdef BUS32BIT_VERSION
-#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:2m@5m(part0),5m@9m(part1)"
-#else
-#define MTDPARTS_DEFAULT "mtdparts=mx1fs2-0:-@320k(jffs2)"
-#endif
-
-/*
- * Environment setup. Definitions of monitor location and size with
- * definition of environment setup ends up in 2 possibilities.
- * 1. Embeded environment - in u-boot code is space for environment
- * 2. Environment is read from predefined sector of flash
- * Right now we support 2. possiblity, but expecting no env placed
- * on mentioned address right now. This also needs to provide whole
- * sector for it - for us 256Kb is really waste of memory. U-boot uses
- * default env. and until kernel parameters could be sent to kernel
- * env. has no sense to us.
- */
-
-#define CONFIG_SYS_MONITOR_BASE 0x10000000
-#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */
-#define CONFIG_ENV_SIZE 0x20000
-
-#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
-
-/* Setup CS4 and CS5 */
-#define CONFIG_SYS_GIUS_A_VAL 0x0003fffe
-
-/*
- * CSxU_VAL:
- * 63| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x|32
- * |DTACK_SEL|0|BCD | BCS | PSZ|PME|SYNC| DOL | CNC| WSC | 0| WWS | EDC |
- *
- * CSxL_VAL:
- * 31| x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x | x x x x| 0
- * | OEA | OEN | WEA | WEN | CSA |EBC| DSZ | 0|SP|0|WP| 0 0|PA|CSEN|
- */
-
-#define CONFIG_SYS_CS0U_VAL 0x00008C00
-#define CONFIG_SYS_CS0L_VAL 0x22222601
-#define CONFIG_SYS_CS1U_VAL 0x00008C00
-#define CONFIG_SYS_CS1L_VAL 0x22222301
-#define CONFIG_SYS_CS4U_VAL 0x00008C00
-#define CONFIG_SYS_CS4L_VAL 0x22222301
-#define CONFIG_SYS_CS5U_VAL 0x00008C00
-#define CONFIG_SYS_CS5L_VAL 0x22222301
-
-/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
- f_ref=16,777MHz
-
- 0x002a141f: 191,9944MHz
- 0x040b2007: 144MHz
- 0x042a141f: 96MHz
- 0x0811140d: 64MHz
- 0x040e200e: 150MHz
- 0x00321431: 200MHz
-
- 0x08001800: 64MHz mit 16er Quarz
- 0x04001800: 96MHz mit 16er Quarz
- 0x04002400: 144MHz mit 16er Quarz
-
- 31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
- |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------| */
-
-#define CONFIG_SYS_MPCTL0_VAL 0x07E723AD
-#define CONFIG_SYS_MPCTL1_VAL 0x00000040
-#define CONFIG_SYS_PCDR_VAL 0x00010005
-#define CONFIG_SYS_GPCR_VAL 0x00000FFB
-
-#define USE_16M_OSZI /* If you have one, you want to use it
- The internal 32kHz oszillator jitters */
-#ifdef USE_16M_OSZI
-
-#define CONFIG_SYS_SPCTL0_VAL 0x04001401
-#define CONFIG_SYS_SPCTL1_VAL 0x0C000040
-#define CONFIG_SYS_CSCR_VAL 0x07030003
-#define CONFIG_SYS_CLK_FREQ 16780000
-#define CONFIG_SYSPLL_CLK_FREQ 16000000
-
-#else
-
-#define CONFIG_SYS_SPCTL0_VAL 0x07E716D1
-#define CONFIG_SYS_CSCR_VAL 0x06000003
-#define CONFIG_SYS_CLK_FREQ 16780000
-#define CONFIG_SYSPLL_CLK_FREQ 16780000
-
-#endif
-
-/*
- * Well this has to be defined, but on the other hand it is used differently
- * one may expect. For instance loadb command do not cares :-)
- * So advice is - do not relay on this...
- */
-#define CONFIG_SYS_LOAD_ADDR 0x08400000
-
-#define CONFIG_SYS_FMCR_VAL 0x00000003 /* Reset Default */
-
-/* Bit[0:3] contain PERCLK1DIV for UART 1
- 0x000b00b ->b<- -> 192MHz/12=16MHz
- 0x000b00b ->8<- -> 144MHz/09=16MHz
- 0x000b00b ->3<- -> 64MHz/4=16MHz */
-
-#ifdef _CONFIG_UART1
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL1
-#elif defined _CONFIG_UART2
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL2
-#elif defined _CONFIG_UART3 | defined _CONFIG_UART4
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_CLK 3686400
-#define CONFIG_SYS_NS16550_REG_SIZE 1
-#define CONFIG_CONS_INDEX 1
-#ifdef _CONFIG_UART3
-#define CONFIG_SYS_NS16550_COM1 0x15000000
-#elif defined _CONFIG_UART4
-#define CONFIG_SYS_NS16550_COM1 0x16000000
-#endif
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h
index 3c61911..adb2ee1 100644
--- a/include/configs/mx31ads.h
+++ b/include/configs/mx31ads.h
@@ -65,6 +65,7 @@
#define CONFIG_MXC_SPI 1
#define CONFIG_DEFAULT_SPI_BUS 1
#define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
+#define CONFIG_MXC_GPIO
#define CONFIG_FSL_PMIC
#define CONFIG_FSL_PMIC_BUS 1
diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h
index 086355b..4e9022d 100644
--- a/include/configs/mx35pdk.h
+++ b/include/configs/mx35pdk.h
@@ -63,6 +63,7 @@
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_SYS_I2C_SLAVE 0xfe
#define CONFIG_MXC_SPI
+#define CONFIG_MXC_GPIO
/*
@@ -173,11 +174,11 @@
/*
* Physical Memory Map
*/
-#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE (128 * 1024 * 1024)
-#define iomem_valid_addr(addr, size) \
- (addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE))
+#define PHYS_SDRAM_2 CSD1_BASE_ADDR
+#define PHYS_SDRAM_2_SIZE (128 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE CSD0_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR + 0x10000)
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index fd42afc..7d05dc8 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -35,8 +35,6 @@
#define CONFIG_SYS_TEXT_BASE 0x97800000
-#define CONFIG_SYS_L2CACHE_OFF
-
#include <asm/arch/imx-regs.h>
/*
* Disabled for now due to build problems under Debian and a significant
@@ -62,6 +60,7 @@
*/
#define CONFIG_MXC_UART
#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_GPIO
/*
* SPI Configs
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index c872510..c0b8d6a 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -29,8 +29,6 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_L2_OFF
-
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 5f54035..7fb1d9a 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -29,8 +29,6 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_SYS_L2CACHE_OFF
-
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index 544e3fb..cfb38a5 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -30,8 +30,6 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_L2_OFF
-
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index 65d5e05..49f8c6e 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -29,8 +29,6 @@
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
-#define CONFIG_L2_OFF
-
#include <asm/arch/imx-regs.h>
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
diff --git a/include/configs/netstar.h b/include/configs/netstar.h
deleted file mode 100644
index f159013..0000000
--- a/include/configs/netstar.h
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * Configuation settings for the TI OMAP NetStar board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/omap1510.h>
-
-#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP1510 1 /* which is in a 5910 */
-
-/* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */
-#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R /* There is nothing to really init */
-#define BOARD_LATE_INIT /* but we flash the LEDs here */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x10000000
-#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
-#define PHYS_FLASH_1 0x00000000
-
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR 0x4000
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_SECT_SIZE (8 * 1024)
-#define CONFIG_ENV_ADDR_REDUND 0x6000
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-
-/*
- * The stack size is set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (1 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ)
-#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x04000300
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 19
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
-#define CONFIG_FLASH_CFI_LEGACY
-#define CONFIG_SYS_FLASH_LEGACY_512Kx16
-
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23)
-#define NAND_ALLOW_ERASE_ALL 1
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Partitions (mtdparts command line support)
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=gen_nand.0"
-#define MTDPARTS_DEFAULT "mtdparts=" \
- "physmap-flash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \
- "gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)"
-
-/*
- * Command line configuration
- */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_LOOPW
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
-#define CONFIG_BOOTCOMMAND "run fboot"
-#define CONFIG_PREBOOT "run setup"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "autostart=yes\0" \
- "ospart=0\0" \
- "setup=setenv bootargs console=ttyS0,$baudrate $mtdparts\0" \
- "setpart=" \
- "if test -n $swapos; then " \
- "setenv swapos; saveenv; " \
- "if test $ospart -eq 0; then " \
- "setenv ospart 1; " \
- "else " \
- "setenv ospart 0; " \
- "fi; " \
- "fi\0" \
- "nfsargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
- "nfsroot=$rootpath root=/dev/nfs\0" \
- "flashargs=run setpart;setenv bootargs $bootargs " \
- "root=mtd:rootfs$ospart ro " \
- "rootfstype=jffs2\0" \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
- "fboot=run flashargs;nboot kernel$ospart\0" \
- "nboot=bootp;run nfsargs;tftp\0"
-
-#if 0 /* feel free to disable for development */
-#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT \
- "\nNetStar PBX - boot in %d secs...\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "# "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_AUTO_COMPLETE
-
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1
-#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
- (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE)
-
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000)
-
-/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV 7
-#define CONFIG_SYS_HZ 1000
-
-#define OMAP5910_DPLL_DIV 1
-#define OMAP5910_DPLL_MUL \
- ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
-
-#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
-#define OMAP5910_LCD_DIV 2 /* CKL/4 */
-#define OMAP5910_ARM_DIV 0 /* CKL/1 */
-#define OMAP5910_DSP_DIV 0 /* CKL/1 */
-#define OMAP5910_TC_DIV 1 /* CKL/2 */
-#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
-#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
-
-#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b */
-#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
- (OMAP5910_LCD_DIV << 2) | \
- (OMAP5910_ARM_DIV << 4) | \
- (OMAP5910_DSP_DIV << 6) | \
- (OMAP5910_TC_DIV << 8) | \
- (OMAP5910_DSP_MMU_DIV << 10) | \
- (OMAP5910_ARM_TIM_SEL << 12))
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/omap1610h2.h b/include/configs/omap1610h2.h
index cb2a07f..9fa3317 100644
--- a/include/configs/omap1610h2.h
+++ b/include/configs/omap1610h2.h
@@ -34,7 +34,8 @@
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP1610 1 /* which is in a 1610 */
#define CONFIG_H2_OMAP1610 1 /* on an H2 Board */
-#define CONFIG_MACH_OMAP_H2 /* Select board mach-type */
+
+#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_H2
/* input clock of PLL */
/* the OMAP1610 H2 has 12MHz input clock */
diff --git a/include/configs/omap1610inn.h b/include/configs/omap1610inn.h
index e82b4b2..e3f3487 100644
--- a/include/configs/omap1610inn.h
+++ b/include/configs/omap1610inn.h
@@ -34,7 +34,8 @@
#define CONFIG_OMAP 1 /* in a TI OMAP core */
#define CONFIG_OMAP1610 1 /* which is in a 1610 */
#define CONFIG_INNOVATOROMAP1610 1 /* a Innovator Board */
-#define CONFIG_MACH_OMAP_INNOVATOR /* Select board mach-type */
+
+#define CONFIG_MACH_TYPE MACH_TYPE_OMAP_INNOVATOR
/* input clock of PLL */
/* the OMAP1610 Innovator has 12MHz input clock */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index d7cbc2f..18c6deb 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -114,6 +114,12 @@
/* DDR - I use Micron DDR */
#define CONFIG_OMAP3_MICRON_DDR 1
+/* Enable Multi Bus support for I2C */
+#define CONFIG_I2C_MULTI_BUS 1
+
+/* Probe all devices */
+#define CONFIG_SYS_I2C_NOPROBES {0x0, 0x0}
+
/* USB */
#define CONFIG_MUSB_UDC 1
#define CONFIG_USB_OMAP3 1
@@ -128,6 +134,11 @@
#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_ETHER_ASIX
+
+#define CONFIG_NET_MULTI
/* commands to include */
#include <config_cmd_default.h>
@@ -148,13 +159,16 @@
#define CONFIG_USB_STORAGE /* USB storage support */
#define CONFIG_CMD_NAND /* NAND support */
#define CONFIG_CMD_LED /* LED support */
+#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
+#define CONFIG_CMD_NFS /* NFS support */
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_SETEXPR /* Evaluate expressions */
#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
#undef CONFIG_CMD_IMI /* iminfo */
#undef CONFIG_CMD_IMLS /* List all found images */
-#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
-#undef CONFIG_CMD_NFS /* NFS support */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_HARD_I2C 1
@@ -164,6 +178,7 @@
#define CONFIG_SYS_I2C_BUS_SELECT 1
#define CONFIG_I2C_MULTI_BUS 1
#define CONFIG_DRIVER_OMAP34XX_I2C 1
+#define CONFIG_VIDEO_OMAP3 /* DSS Support */
/*
* TWL4030
@@ -194,41 +209,65 @@
/* partition */
/* Environment information */
-#define CONFIG_BOOTDELAY 10
+#define CONFIG_BOOTDELAY 2
#define CONFIG_EXTRA_ENV_SETTINGS \
- "loadaddr=0x82000000\0" \
+ "loadaddr=0x80200000\0" \
+ "rdaddr=0x81000000\0" \
"usbtty=cdc_acm\0" \
+ "usbethaddr=de:ad:be:ef\0" \
+ "bootfile=uImage.beagle\0" \
"console=ttyS2,115200n8\0" \
"mpurate=auto\0" \
+ "buddy=none "\
+ "optargs=\0" \
+ "camera=none\0" \
"vram=12M\0" \
- "dvimode=1024x768MR-16@60\0" \
+ "dvimode=640x480MR-16@60\0" \
"defaultdisplay=dvi\0" \
"mmcdev=0\0" \
"mmcroot=/dev/mmcblk0p2 rw\0" \
"mmcrootfstype=ext3 rootwait\0" \
"nandroot=/dev/mtdblock4 rw\0" \
"nandrootfstype=jffs2\0" \
+ "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=0x81000000,64M\0" \
+ "ramrootfstype=ext2\0" \
"mmcargs=setenv bootargs console=${console} " \
+ "${optargs} " \
"mpurate=${mpurate} " \
+ "buddy=${buddy} "\
+ "camera=${camera} "\
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
"omapdss.def_disp=${defaultdisplay} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
"nandargs=setenv bootargs console=${console} " \
+ "${optargs} " \
"mpurate=${mpurate} " \
+ "buddy=${buddy} "\
+ "camera=${camera} "\
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
"omapdss.def_disp=${defaultdisplay} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
- "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
+ "bootenv=uEnv.txt\0" \
+ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
"importbootenv=echo Importing environment from mmc ...; " \
"env import -t $loadaddr $filesize\0" \
- "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "ramargs=setenv bootargs console=${console} " \
+ "${optargs} " \
+ "mpurate=${mpurate} " \
+ "buddy=${buddy} "\
+ "vram=${vram} " \
+ "omapfb.mode=dvi:${dvimode} " \
+ "omapdss.def_disp=${defaultdisplay} " \
+ "root=${ramroot} " \
+ "rootfstype=${ramrootfstype}\0" \
+ "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \
+ "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} /boot/uImage\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
@@ -236,11 +275,18 @@
"run nandargs; " \
"nand read ${loadaddr} 280000 400000; " \
"bootm ${loadaddr}\0" \
+ "ramboot=echo Booting from ramdisk ...; " \
+ "run ramargs; " \
+ "bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
"if mmc rescan ${mmcdev}; then " \
+ "if userbutton; then " \
+ "setenv bootenv user.txt;" \
+ "fi;" \
"echo SD/MMC found on device ${mmcdev};" \
"if run loadbootenv; then " \
+ "echo Loaded environment from ${bootenv};" \
"run importbootenv;" \
"fi;" \
"if test -n $uenvcmd; then " \
@@ -261,18 +307,19 @@
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "OMAP3 beagleboard.org # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
-#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
- /* works on */
-#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
- 0x01F00000) /* 31MB */
+#define CONFIG_SYS_ALT_MEMTEST 1
+#define CONFIG_SYS_MEMTEST_START (0x82000000) /* memtest */
+ /* defaults */
+#define CONFIG_SYS_MEMTEST_END (0x87FFFFFF) /* 128MB */
+#define CONFIG_SYS_MEMTEST_SCRATCH (0x81000000) /* dummy address */
#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
/* load address */
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index afa18aa..fdc861d 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -97,7 +97,8 @@
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
/* DDR - I use Micron DDR */
@@ -198,6 +199,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x82000000\0" \
"usbtty=cdc_acm\0" \
+ "mmcdev=0\0" \
"console=ttyS2,115200n8\0" \
"mmcargs=setenv bootargs console=${console} " \
"root=/dev/mmcblk0p2 rw " \
@@ -205,10 +207,10 @@
"nandargs=setenv bootargs console=${console} " \
"root=/dev/mtdblock4 rw " \
"rootfstype=jffs2\0" \
- "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source ${loadaddr}\0" \
- "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
@@ -218,7 +220,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc init; then " \
+ "if mmc rescan ${mmcdev}; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
@@ -237,7 +239,7 @@
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "OMAP3_EVM # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index d6e0a06..3f37263 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -169,7 +169,6 @@
"mpurate=${mpurate} " \
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
"omapdss.def_disp=${defaultdisplay} " \
"root=${mmcroot} " \
"rootfstype=${mmcrootfstype}\0" \
@@ -177,7 +176,6 @@
"mpurate=${mpurate} " \
"vram=${vram} " \
"omapfb.mode=dvi:${dvimode} " \
- "omapfb.debug=y " \
"omapdss.def_disp=${defaultdisplay} " \
"root=${nandroot} " \
"rootfstype=${nandrootfstype}\0" \
@@ -213,7 +211,7 @@
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "Overo # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h
index bd55abc..3c2793e 100644
--- a/include/configs/omap3_pandora.h
+++ b/include/configs/omap3_pandora.h
@@ -100,8 +100,9 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \
115200}
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
/* DDR - I use Micron DDR */
@@ -182,7 +183,7 @@
"mtdparts=" MTDPARTS_DEFAULT "\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc init && fatload mmc1 0 ${loadaddr} autoboot.scr || " \
+ "if mmc rescan && fatload mmc1 0 ${loadaddr} autoboot.scr || " \
"ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \
"source ${loadaddr}; " \
"fi; " \
@@ -196,7 +197,7 @@
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "Pandora # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h
index e1d8c78..6a826ba 100644
--- a/include/configs/omap3_sdp3430.h
+++ b/include/configs/omap3_sdp3430.h
@@ -189,8 +189,9 @@
*/
#if defined(CONFIG_CMD_MMC)
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
#endif
@@ -269,7 +270,7 @@
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "OMAP34XX SDP # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index aeac7c7..fbac222 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -95,8 +95,9 @@
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
115200}
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
/* DDR - I use Micron DDR */
@@ -178,6 +179,7 @@
"loadaddr=0x82000000\0" \
"usbtty=cdc_acm\0" \
"console=ttyS2,115200n8\0" \
+ "mmcdev=0\0" \
"videomode=1024x768@60,vxres=1024,vyres=768\0" \
"videospec=omapfb:vram:2M,vram:4M\0" \
"mmcargs=setenv bootargs console=${console} " \
@@ -188,10 +190,10 @@
"video=${videospec},mode:${videomode} " \
"root=/dev/mtdblock4 rw " \
"rootfstype=jffs2\0" \
- "loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source ${loadaddr}\0" \
- "loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"bootm ${loadaddr}\0" \
@@ -201,7 +203,7 @@
"bootm ${loadaddr}\0" \
#define CONFIG_BOOTCOMMAND \
- "if mmc init; then " \
+ "if mmc rescan ${mmcdev}; then " \
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
@@ -220,7 +222,7 @@
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "OMAP3 Zoom1 # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h
index 2a56182..8de3d31 100644
--- a/include/configs/omap3_zoom2.h
+++ b/include/configs/omap3_zoom2.h
@@ -95,8 +95,9 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
+#define CONFIG_GENERIC_MMC 1
#define CONFIG_MMC 1
-#define CONFIG_OMAP3_MMC 1
+#define CONFIG_OMAP_HSMMC 1
#define CONFIG_DOS_PARTITION 1
/* DDR - I use Micron DDR */
@@ -200,7 +201,7 @@
#define CONFIG_SYS_PROMPT "OMAP3 Zoom2 # "
#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16
diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h
index e313231..6faf0e2 100644
--- a/include/configs/omap4_panda.h
+++ b/include/configs/omap4_panda.h
@@ -184,7 +184,7 @@
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "Panda # "
-#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_CBSIZE 512
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -245,7 +245,7 @@
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_TEXT_BASE 0x40304350
-#define CONFIG_SPL_MAX_SIZE 0x8000 /* 32 K */
+#define CONFIG_SPL_MAX_SIZE (38 * 1024)
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h
index 5b3110c..ba6f49d 100644
--- a/include/configs/omap4_sdp4430.h
+++ b/include/configs/omap4_sdp4430.h
@@ -190,7 +190,7 @@
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
#define CONFIG_SYS_PROMPT "OMAP4430 SDP # "
-#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_CBSIZE 512
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
sizeof(CONFIG_SYS_PROMPT) + 16)
@@ -251,7 +251,7 @@
/* Defines for SPL */
#define CONFIG_SPL
#define CONFIG_SPL_TEXT_BASE 0x40304350
-#define CONFIG_SPL_MAX_SIZE 0x8000 /* 32 K */
+#define CONFIG_SPL_MAX_SIZE (38 * 1024)
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
diff --git a/include/configs/origen.h b/include/configs/origen.h
new file mode 100644
index 0000000..889d5fc
--- /dev/null
+++ b/include/configs/origen.h
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics
+ *
+ * Configuration settings for the SAMSUNG ORIGEN (S5PV310) board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* High Level Configuration Options */
+#define CONFIG_SAMSUNG 1 /* SAMSUNG core */
+#define CONFIG_S5P 1 /* S5P Family */
+#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */
+#define CONFIG_ORIGEN 1 /* working with ORIGEN*/
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Keep L2 Cache Disabled */
+#define CONFIG_L2_OFF 1
+#define CONFIG_SYS_DCACHE_OFF 1
+
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CONFIG_SYS_TEXT_BASE 0x43E00000
+
+/* input clock of PLL: ORIGEN has 24MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 24000000
+
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+#define CONFIG_CMDLINE_EDITING
+
+/* MACH_TYPE_ORIGEN macro will be removed once added to mach-types */
+#define MACH_TYPE_ORIGEN 3455
+#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN
+
+/* Power Down Modes */
+#define S5P_CHECK_SLEEP 0x00000BAD
+#define S5P_CHECK_DIDLE 0xBAD00000
+#define S5P_CHECK_LPA 0xABAD0000
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
+
+/* select serial console configuration */
+#define CONFIG_SERIAL_MULTI 1
+#define CONFIG_SERIAL2 1 /* use SERIAL 2 */
+#define CONFIG_BAUDRATE 115200
+#define S5PC210_DEFAULT_UART_OFFSET 0x020000
+
+/* SD/MMC configuration */
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_MMC 1
+#define CONFIG_S5P_MMC 1
+
+/* PWM */
+#define CONFIG_PWM 1
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+/* Command definition*/
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+/* MMC SPL */
+#define CONFIG_SPL
+#define COPY_BL2_FNPTR_ADDR 0x02020030
+
+#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "ORIGEN # "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/
+#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+/* memtest works on */
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
+
+#define CONFIG_SYS_HZ 1000
+
+/* valid baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (256 << 10) /* 256KB */
+
+/* ORIGEN has 4 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS 4
+#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
+#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE
+#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE))
+#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE
+
+/* FLASH and environment organization */
+#define CONFIG_SYS_NO_FLASH 1
+#undef CONFIG_CMD_IMLS
+#define CONFIG_IDENT_STRING " for ORIGEN"
+
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+#define CONFIG_CLK_1000_400_200
+
+/* MIU (Memory Interleaving Unit) */
+#define CONFIG_MIU_2BIT_21_7_INTERLEAVED
+
+#define CONFIG_ENV_IS_IN_MMC 1
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */
+#define RESERVE_BLOCK_SIZE (512)
+#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/
+#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE)
+#define CONFIG_DOS_PARTITION 1
+
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
+
+/* U-boot copy size from boot Media to DRAM.*/
+#define COPY_BL2_SIZE 0x80000
+#define BL2_START_OFFSET ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
+#define BL2_SIZE_BLOC_COUNT (COPY_BL2_SIZE/512)
+#endif /* __CONFIG_H */
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 26e5049..3a8b095 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -28,25 +28,29 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+
+#include <asm/hardware.h>
/* ARM asynchronous clock */
-#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261"
#define CONFIG_DISPLAY_BOARDINFO
#define MASTER_PLL_DIV 15
#define MASTER_PLL_MUL 162
#define MAIN_PLL_DIV 2
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
#define CONFIG_SYS_HZ 1000
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91SAM9261 1 /* It's an Atmel AT91SAM9261 SoC*/
+#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261"
#define CONFIG_PM9261 1 /* on a Ronetix PM9261 Board */
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_SYS_TEXT_BASE 0
-#define CONFIG_AT91FAMILY
/* clocks */
/* CKGR_MOR - enable main osc. */
@@ -160,10 +164,8 @@
*/
#define CONFIG_AT91_GPIO 1
#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
/* LCD */
#define CONFIG_LCD 1
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 96e12f2..1e282d2 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -28,6 +28,12 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
+
/* ARM asynchronous clock */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -36,16 +42,15 @@
#define MASTER_PLL_MUL 65
#define MAIN_PLL_DIV 2 /* 2 or 4 */
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_HZ 1000
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
-#define CONFIG_AT91SAM9263 1 /* It's an Atmel AT91SAM9263 SoC*/
+#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9263"
#define CONFIG_PM9263 1 /* on a Ronetix PM9263 Board */
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_SYS_TEXT_BASE 0
-#define CONFIG_AT91FAMILY
/* clocks */
#define CONFIG_SYS_MOR_VAL \
@@ -170,10 +175,8 @@
*/
#define CONFIG_AT91_GPIO 1
#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
/* LCD */
#define CONFIG_LCD 1
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index ec51ccf..672f663 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -32,15 +32,20 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
+
#define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */
-#define CONFIG_AT91SAM9G45 1 /* It's an Atmel AT91SAM9G45 SoC */
+#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45"
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_HZ 1000
-#define CONFIG_SYS_TEXT_BASE 0x73f00000
-#define CONFIG_AT91FAMILY
+#define CONFIG_SYS_TEXT_BASE 0x73f00000
#define CONFIG_ARCH_CPU_INIT
@@ -55,7 +60,8 @@
*/
#define CONFIG_AT91_GPIO 1
#define CONFIG_ATMEL_USART 1
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
#define CONFIG_SYS_USE_NANDFLASH 1
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index a5aa859..6d0058f 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -220,4 +220,16 @@
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - 0x1000000)
+#include <asm/arch/gpio.h>
+/*
+ * I2C Settings
+ */
+#define CONFIG_SOFT_I2C_GPIO_SCL s5pc110_gpio_get_nr(j4, 3)
+#define CONFIG_SOFT_I2C_GPIO_SDA s5pc110_gpio_get_nr(j4, 0)
+
+#define CONFIG_SOFT_I2C 1
+#define CONFIG_SYS_I2C_SPEED 50000
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS 7
+
#endif /* __CONFIG_H */
diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h
deleted file mode 100644
index f0f19b2..0000000
--- a/include/configs/sbc2410x.h
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- * David Mueller <d.mueller@elsoft.ch>
- *
- * Modified for the friendly-arm SBC-2410X by
- * (C) Copyright 2005
- * JinHua Luo, GuangDong Linux Center, <luo.jinhua@gd-linux.com>
- *
- * Configuation settings for the friendly-arm SBC-2410X board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * If we are developing, we might want to start armboot from ram
- * so we MUST NOT initialize critical regs like mem-timing ...
- */
-#undef CONFIG_SKIP_LOWLEVEL_INIT /* undef for developing */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */
-#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000/* the SBC2410X has 12MHz input clock */
-
-
-#define USE_920T_MMU 1
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x19000300
-#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SBC2410X */
-
-/************************************************************
- * RTC
- ************************************************************/
-#define CONFIG_RTC_S3C24X0 1
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_PING
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttySAC0 root=/dev/nfs " \
- "nfsroot=192.168.0.1:/friendly-arm/rootfs_netserv " \
- "ip=192.168.0.69:192.168.0.1:192.168.0.1:255.255.255.0:debian:eth0:off"
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.0.69
-#define CONFIG_SERVERIP 192.168.0.1
-/*#define CONFIG_BOOTFILE "elinos-lart" */
-#define CONFIG_BOOTCOMMAND "dhcp; bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "[ ~ljh@GDLC ]# " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x30000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x33F00000 /* 63 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x33000000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x30000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-/* #define CONFIG_AMD_LV400 1 /\* uncomment this if you have a LV400 flash *\/ */
-
-#define CONFIG_AMD_LV800 1 /* uncomment this if you have a LV800 flash */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-
-#ifdef CONFIG_AMD_LV800
-#define PHYS_FLASH_SIZE 0x00100000 /* 1MB */
-#define CONFIG_SYS_MAX_FLASH_SECT (19) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x0F0000) /* addr of environment */
-#endif
-
-#ifdef CONFIG_AMD_LV400
-#define PHYS_FLASH_SIZE 0x00080000 /* 512KB */
-#define CONFIG_SYS_MAX_FLASH_SECT (11) /* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x070000) /* addr of environment */
-#endif
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */
-
-/*-----------------------------------------------------------------------
- * NAND flash settings
- */
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_NAND_S3C2410
-#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#endif /* CONFIG_CMD_NAND */
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_CMDLINE_TAG
-
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-
-#define CONFIG_CMDLINE_EDITING
-
-#ifdef CONFIG_CMDLINE_EDITING
-#undef CONFIG_AUTO_COMPLETE
-#else
-#define CONFIG_AUTO_COMPLETE
-#endif
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h
index 00f4dc9..967a991 100644
--- a/include/configs/sbc35_a9g20.h
+++ b/include/configs/sbc35_a9g20.h
@@ -26,54 +26,49 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_AT91_LEGACY
+/* SoC type is defined in boards.cfg */
+#include <asm/hardware.h>
+#include <asm/sizes.h>
-#if defined(CONFIG_SBC35_A9G20_NANDFLASH) || defined(CONFIG_SBC35_A9G20_EEPROM)
-#define CONFIG_SBC35_A9G20
-#endif
-
-#define CONFIG_AT91SAM9G20
-
-#if defined(CONFIG_SBC35_A9G20_NANDFLASH)
+#if defined(CONFIG_SYS_USE_NANDFLASH)
#define CONFIG_ENV_IS_IN_NAND
#else
#define CONFIG_ENV_IS_IN_EEPROM
#endif
/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12.000 MHz crystal */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
+#define CONFIG_SYS_HZ 1000
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
-/*
- * Hardware drivers
- */
-#define CONFIG_AT91_GPIO 1
+/* GPIO */
+#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
+#define CONFIG_AT91_GPIO
+
+/* Serial */
#define CONFIG_ATMEL_USART
-#define CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#undef CONFIG_USART3
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_BOOTDELAY 3
/*
* BOOTP options
*/
-#define CONFIG_BOOTP_BOOTFILESIZE 1
-#define CONFIG_BOOTP_BOOTPATH 1
-#define CONFIG_BOOTP_GATEWAY 1
-#define CONFIG_BOOTP_HOSTNAME 1
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
@@ -86,14 +81,16 @@
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_SOURCE
-#define CONFIG_CMD_PING 1
-#define CONFIG_CMD_DHCP 1
-#define CONFIG_CMD_USB 1
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_USB
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+#define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \
+ GENERATED_GBL_DATA_SIZE)
/* SPI EEPROM */
#define CONFIG_SPI
@@ -117,7 +114,7 @@
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
+#define CONFIG_SYS_NAND_DBW_8
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
@@ -129,27 +126,27 @@
#define CONFIG_SYS_NO_FLASH 1
/* Ethernet */
-#define CONFIG_MACB 1
-#define CONFIG_RMII 1
-#define CONFIG_NET_MULTI 1
+#define CONFIG_MACB
+#define CONFIG_RMII
+#define CONFIG_NET_MULTI
#define CONFIG_NET_RETRY_COUNT 20
-#define CONFIG_RESET_PHY_R 1
-#define CONFIG_MACB_SEARCH_PHY 1
+#define CONFIG_RESET_PHY_R
+#define CONFIG_MACB_SEARCH_PHY
/* USB */
#define CONFIG_USB_ATMEL
-#define CONFIG_USB_OHCI_NEW 1
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
+#define CONFIG_USB_OHCI_NEW
+#define CONFIG_DOS_PARTITION
+#define CONFIG_SYS_USB_OHCI_CPU_INIT
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 /* AT91SAM9260_UHP_BASE */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_USB_STORAGE 1
-#define CONFIG_CMD_FAT 1
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_FAT
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END 0x23e00000
/* Env in EEPROM, bootstrap + u-boot in NAND*/
@@ -172,8 +169,6 @@
"120M(rootfs),-(other) " \
"rw rootfstype=jffs2"
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_SYS_PROMPT "U-Boot> "
#define CONFIG_SYS_CBSIZE 256
diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h
deleted file mode 100644
index 064749e..0000000
--- a/include/configs/smdk2400.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * (C) Copyright 2002-2005
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- * Gary Jennejohn <garyj@denx.de>
- *
- * Configuation settings for the SAMSUNG board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T core */
-#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */
-#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */
-#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 12000000 /* SMDK2400 has 12 MHz input clock */
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x07000300 /* agrees with WIN CE PA */
-#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_S3C24X0_SERIAL
-#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on SAMSUNG */
-
-#undef CONFIG_HWFLOW /* include RTS/CTS flow control support */
-
-#undef CONFIG_MODEM_SUPPORT /* enable modem initialization stuff */
-
-/*
- * The following enables modem debugging stuff. The dbg() and
- * 'char screen[1024]' are used for debug printfs. Unfortunately,
- * it is usable only from BDI
- */
-#undef CONFIG_MODEM_SUPPORT_DEBUG
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 115200
-
-#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
-
-/* Use s3c2400's RTC */
-#define CONFIG_RTC_S3C24X0 1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_SNTP
-
-#if defined(CONFIG_HWFLOW)
- #define CONFIG_CONFIG_HWFLOW
-#endif
-
-#if !defined(USE_920T_MMU)
- #undef CONFIG_CMD_CACHE
-#endif
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 134.98.93.36
-#define CONFIG_SERVERIP 134.98.93.22
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-/* what's this ? it's not used anywhere */
-#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "SMDK2400 # " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x0c000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0e000000 /* 32 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x0cf00000 /* default load address */
-
-#define CONFIG_SYS_HZ 1000
-
-/* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x0c000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT (64) /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (5*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-
-/* Address and size of Primary Environment Sector */
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
-#define CONFIG_ENV_SIZE 0x40000
-
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h
index c9acf58..d175ed6 100644
--- a/include/configs/smdk6400.h
+++ b/include/configs/smdk6400.h
@@ -65,7 +65,7 @@
/*
* Architecture magic and machine type
*/
-#define MACH_TYPE 1270
+#define CONFIG_MACH_TYPE 1270
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h
index 7b18022..986aeba 100644
--- a/include/configs/tny_a9260.h
+++ b/include/configs/tny_a9260.h
@@ -30,19 +30,11 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_AT91_LEGACY
-
-#if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9260_EEPROM)
-#define CONFIG_TNY_A9260
-#elif defined(CONFIG_TNY_A9G20_NANDFLASH) || defined(CONFIG_TNY_A9G20_EEPROM)
-#define CONFIG_TNY_A9G20
-#endif
-
-#ifdef CONFIG_TNY_A9260
-#define CONFIG_AT91SAM9260
-#else
-#define CONFIG_AT91SAM9G20
-#endif
+/*
+ * SoC must be defined first, before hardware.h is included.
+ * In this case SoC is defined in boards.cfg.
+ */
+#include <asm/hardware.h>
#if defined(CONFIG_TNY_A9260_NANDFLASH) || defined(CONFIG_TNY_A9G20_NANDFLASH)
#define CONFIG_ENV_IS_IN_NAND
@@ -50,29 +42,36 @@
#define CONFIG_ENV_IS_IN_EEPROM
#endif
+/* Define actual evaluation board type from used processor type */
+#ifdef CONFIG_AT91SAM9G20
+# define CONFIG_TNY_A9G20
+#else
+# define CONFIG_TNY_A9260
+#endif
+
/* ARM asynchronous clock */
+#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */
-#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ 1000
-#define CONFIG_ARM926EJS 1 /* This is an ARM926EJS Core */
#define CONFIG_ARCH_CPU_INIT
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
#define CONFIG_SKIP_LOWLEVEL_INIT
/*
* Hardware drivers
*/
-#define CONFIG_AT91_GPIO 1
-#define CONFIG_ATMEL_USART 1
-#undef CONFIG_USART0
-#undef CONFIG_USART1
-#undef CONFIG_USART2
-#define CONFIG_USART3 1 /* USART 3 is DBGU */
+#define CONFIG_ATMEL_LEGACY
+#define CONFIG_AT91_GPIO
+
+#define CONFIG_ATMEL_USART
+#define CONFIG_USART_BASE ATMEL_BASE_DBGU
+#define CONFIG_USART_ID ATMEL_ID_SYS
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CONFIG_BOOTDELAY 3
@@ -86,13 +85,16 @@
#undef CONFIG_CMD_IMLS
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_SOURCE
#undef CONFIG_CMD_USB
/* SDRAM */
#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
+#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */
+# define CONFIG_SYS_INIT_SP_ADDR \
+ (ATMEL_BASE_SRAM1 + 0x1000 - GENERATED_GBL_DATA_SIZE)
/* SPI EEPROM */
#define CONFIG_SPI
@@ -109,8 +111,8 @@
#define CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0x40000000
-#define CONFIG_SYS_NAND_DBW_8 1
+#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
+#define CONFIG_SYS_NAND_DBW_8
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
@@ -119,27 +121,27 @@
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
/* NOR flash - no real flash on this board */
-#define CONFIG_SYS_NO_FLASH 1
+#define CONFIG_SYS_NO_FLASH
-#define CONFIG_DOS_PARTITION 1
-#define CONFIG_CMD_FAT 1
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END 0x23e00000
/* Env in EEPROM, bootstrap + u-boot in NAND*/
#ifdef CONFIG_ENV_IS_IN_EEPROM
#define CONFIG_ENV_OFFSET 0x20
-#define CONFIG_ENV_SIZE 0x1000
+#define CONFIG_ENV_SIZE 0x1000
#endif
/* Env, bootstrap and u-boot in NAND */
#ifdef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET 0x60000
-#define CONFIG_ENV_OFFSET_REDUND 0x80000
-#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_OFFSET 0x60000
+#define CONFIG_ENV_OFFSET_REDUND 0x80000
+#define CONFIG_ENV_SIZE 0x20000
#endif
#define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000"
@@ -149,15 +151,12 @@
"120M(rootfs),-(other) " \
"rw rootfstype=jffs2"
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
-
#define CONFIG_SYS_PROMPT "U-Boot> "
#define CONFIG_SYS_CBSIZE 256
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_LONGHELP 1
-#define CONFIG_CMDLINE_EDITING 1
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
/*
* Size of malloc() pool
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index 32cee82..3bfcdff 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -39,10 +39,6 @@
#define CONFIG_VERSATILE 1 /* in Versatile Platform Board */
#define CONFIG_ARCH_VERSATILE 1 /* Specifically, a Versatile */
-#ifndef CONFIG_ARCH_VERSATILE_AB /* AB */
-#define CONFIG_ARCH_VERSATILE_PB /* Versatile PB is default */
-#endif
-
#define CONFIG_SYS_MEMTEST_START 0x100000
#define CONFIG_SYS_MEMTEST_END 0x10000000
#define CONFIG_SYS_HZ (1000000 / 256)
diff --git a/include/configs/vision2.h b/include/configs/vision2.h
index 50c920d..b5c7357 100644
--- a/include/configs/vision2.h
+++ b/include/configs/vision2.h
@@ -26,7 +26,6 @@
#define CONFIG_MX51 /* in a mx51 */
-#define CONFIG_SYS_L2CACHE_OFF
#define CONFIG_SYS_TEXT_BASE 0x97800000
#include <asm/arch/imx-regs.h>
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
deleted file mode 100644
index c258030..0000000
--- a/include/configs/voiceblue.h
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
- *
- * Configuation settings for the TI OMAP VoiceBlue board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <configs/omap1510.h>
-
-#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP1510 1 /* which is in a 5910 */
-
-/* Input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */
-#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
-
-#define CONFIG_MISC_INIT_R /* There is nothing to really init */
-#define BOARD_LATE_INIT /* but we flash the LEDs here */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1
-#define PHYS_SDRAM_1 0x10000000
-#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
-#define PHYS_FLASH_1 0x0000000
-
-#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-
-/*
- * Environment settings
- */
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + CONFIG_SYS_MONITOR_LEN)
-#define CONFIG_ENV_SIZE (8 * 1024)
-#define CONFIG_ENV_SECT_SIZE (64 * 1024)
-#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_OVERWRITE
-
-/*
- * Size of malloc() pool and stack
- */
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-#define CONFIG_STACKSIZE (1 * 1024 * 1024)
-
-/*
- * Hardware drivers
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ)
-#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE
-
-#define CONFIG_NET_MULTI
-#define CONFIG_SMC91111
-#define CONFIG_SMC91111_BASE 0x08000300
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_MAX_FLASH_SECT 512
-
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_RTC_DS1307
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-
-
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-
-/*
- * Command line configuration
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_BOOTD
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-
-#define CONFIG_LOOPW
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
-#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
-#define CONFIG_SYS_AUTOLOAD "n"
-#define CONFIG_BOOTCOMMAND "run nboot"
-#define CONFIG_PREBOOT "run setup"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "silent=1\0" \
- "ospart=0\0" \
- "bootfile=/boot/uImage\0" \
- "setpart=" \
- "if test -n $swapos; then " \
- "setenv swapos; saveenv; " \
- "if test $ospart -eq 0; then " \
- "setenv ospart 1; " \
- "else " \
- "setenv ospart 0; " \
- "fi; " \
- "fi\0" \
- "setup=setenv bootargs console=ttyS0,$baudrate " \
- "mtdparts=$mtdparts\0" \
- "nfsargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
- "nfsroot=$rootpath root=/dev/nfs\0" \
- "flashargs=run setpart; setenv bootargs $bootargs " \
- "root=mtd:data$ospart ro " \
- "rootfstype=jffs2\0" \
- "initrdargs=setenv bootargs $bootargs " \
- "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
- "fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \
- "mboot=bootp; run initrdargs; tftp; bootm\0" \
- "nboot=bootp; run nfsargs; tftp; bootm\0"
-
-#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
-
-#if 1 /* feel free to disable for development */
-#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
-#define CONFIG_AUTOBOOT_PROMPT "\nVoiceBlue Enterprise - booting...\n"
-#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
-#endif
-
-/*
- * Partitions (mtdparts command line support)
- */
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_FLASH_CFI_MTD
-#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:" \
- "256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_PROMPT "# "
-#define CONFIG_SYS_CBSIZE 256
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1)
-#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \
- (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE))
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000)
-
-/*
- * The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE
-#define CONFIG_SYS_PTV 7 /* 2^(PTV+1), divide by 256 */
-#define CONFIG_SYS_HZ 1000
-
-#define OMAP5910_DPLL_DIV 1
-#define OMAP5910_DPLL_MUL \
- ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
-
-#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
-#define OMAP5910_LCD_DIV 2 /* CKL/4 */
-#define OMAP5910_ARM_DIV 0 /* CKL/1 */
-#define OMAP5910_DSP_DIV 0 /* CKL/1 */
-#define OMAP5910_TC_DIV 1 /* CKL/2 */
-#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
-#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
-
-#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */
-#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
- (OMAP5910_LCD_DIV << 2) | \
- (OMAP5910_ARM_DIV << 4) | \
- (OMAP5910_DSP_DIV << 6) | \
- (OMAP5910_TC_DIV << 8) | \
- (OMAP5910_DSP_MMU_DIV << 10) | \
- (OMAP5910_ARM_TIM_SEL << 12))
-
-#define VOICEBLUE_LED_REG 0x04030000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index 35afcd3..ea77971 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -51,7 +51,6 @@
#define CONFIG_BOOTDELAY 2 /* Autoboot delay */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_TEXT_BASE 0x0
#define CONFIG_LZMA /* LZMA compression support */
/*
diff --git a/mmc_spl/board/samsung/smdkv310/Makefile b/mmc_spl/board/samsung/smdkv310/Makefile
index fdfd015..85f4838 100644
--- a/mmc_spl/board/samsung/smdkv310/Makefile
+++ b/mmc_spl/board/samsung/smdkv310/Makefile
@@ -34,6 +34,7 @@ include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/mmc_spl/board/$(BOARDDIR)/u-boot.lds
LDFLAGS = -Bstatic -T $(mmcobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_MMC_SPL
+AFLAGS += -DCONFIG_SPL_BUILD
CFLAGS += -DCONFIG_MMC_SPL
CFLAGS += -DCONFIG_SPL_BUILD
diff --git a/mmc_spl/board/samsung/smdkv310/mmc_boot.c b/mmc_spl/board/samsung/smdkv310/mmc_boot.c
index 566f34e..2f3e463 100644
--- a/mmc_spl/board/samsung/smdkv310/mmc_boot.c
+++ b/mmc_spl/board/samsung/smdkv310/mmc_boot.c
@@ -54,32 +54,6 @@ void board_init_r(gd_t *id, ulong dest_addr)
;
}
-void do_undefined_instruction(struct pt_regs *pt_regs)
+void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
{
}
-
-void do_software_interrupt(struct pt_regs *pt_regs)
-{
-}
-
-void do_prefetch_abort(struct pt_regs *pt_regs)
-{
-}
-
-void do_data_abort(struct pt_regs *pt_regs)
-{
-}
-
-void do_not_used(struct pt_regs *pt_regs)
-{
-}
-
-void do_fiq(struct pt_regs *pt_regs)
-{
-}
-
-#ifndef CONFIG_USE_IRQ
-void do_irq(struct pt_regs *pt_regs)
-{
-}
-#endif
diff --git a/mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c b/mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c
index b98f233..1a51913 100644
--- a/mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c
+++ b/mmc_spl/board/samsung/smdkv310/tools/mkv310_image.c
@@ -26,6 +26,7 @@
#include <fcntl.h>
#include <errno.h>
#include <string.h>
+#include <sys/stat.h>
#define CHECKSUM_OFFSET (14*1024-4)
#define BUFSIZE (16*1024)
diff --git a/mmc_spl/board/samsung/smdkv310/u-boot.lds b/mmc_spl/board/samsung/smdkv310/u-boot.lds
index 61cd16a..4a231d9 100644
--- a/mmc_spl/board/samsung/smdkv310/u-boot.lds
+++ b/mmc_spl/board/samsung/smdkv310/u-boot.lds
@@ -58,6 +58,8 @@ SECTIONS
. = ALIGN(4);
+ __image_copy_end = .;
+
.rel.dyn : {
__rel_dyn_start = .;
*(.rel*)
diff --git a/spl/Makefile b/spl/Makefile
index 87f13f6..95ecce1 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -93,8 +93,18 @@ endif
ALL-y += $(obj)u-boot-spl.bin
+ifdef CONFIG_SAMSUNG
+ALL-y += $(obj)$(BOARD)-spl.bin
+endif
+
all: $(ALL-y)
+ifdef CONFIG_SAMSUNG
+$(obj)$(BOARD)-spl.bin: $(obj)u-boot-spl.bin
+ $(TOPDIR)/board/$(BOARDDIR)/tools/mk$(BOARD)spl.exe \
+ $(obj)u-boot-spl.bin $(obj)$(BOARD)-spl.bin
+endif
+
$(obj)u-boot-spl.bin: $(obj)u-boot-spl
$(OBJCOPY) $(OBJCFLAGS) -O binary $< $@
diff --git a/tools/omapimage.c b/tools/omapimage.c
index 29d91cc..5e739ac 100644
--- a/tools/omapimage.c
+++ b/tools/omapimage.c
@@ -49,7 +49,6 @@ static int omapimage_check_image_types(uint8_t type)
if (type == IH_TYPE_OMAPIMAGE)
return EXIT_SUCCESS;
else {
- fprintf(stderr, "Unknown OMAP image type - %x", type);
return EXIT_FAILURE;
}
}