summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
authorPeng Fan <Peng.Fan@freescale.com>2015-04-29 10:52:52 +0800
committerPeng Fan <Peng.Fan@freescale.com>2015-04-29 15:10:57 +0800
commitdd842f32b6d8d770e844790643ece352f92b8c5e (patch)
tree976176297a3cf2b160bf73632e0a88e86c227852 /board
parentb7f3f9a6100519c784085ea9f6e575162555fb42 (diff)
downloadu-boot-imx-dd842f32b6d8d770e844790643ece352f92b8c5e.zip
u-boot-imx-dd842f32b6d8d770e844790643ece352f92b8c5e.tar.gz
u-boot-imx-dd842f32b6d8d770e844790643ece352f92b8c5e.tar.bz2
MLK-10774-53 imx: update setting pmic volatage
We should not rely on pfuze_common_init to set the voltage, may be we should remove the voltage settings in pfuze_common_init. This patch is to setting the voltages in power_init_board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Diffstat (limited to 'board')
-rw-r--r--board/freescale/common/pfuze.c4
-rw-r--r--board/freescale/mx6qsabreauto/mx6qsabreauto.c32
-rw-r--r--board/freescale/mx6sabresd/mx6sabresd.c24
-rw-r--r--board/freescale/mx6slevk/mx6slevk.c32
-rw-r--r--board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c31
-rw-r--r--board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c32
-rw-r--r--board/freescale/mx6sxsabreauto/mx6sxsabreauto.c18
-rw-r--r--board/freescale/mx6sxsabresd/mx6sxsabresd.c12
8 files changed, 178 insertions, 7 deletions
diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c
index 4980bf7..d6a209e 100644
--- a/board/freescale/common/pfuze.c
+++ b/board/freescale/common/pfuze.c
@@ -71,10 +71,10 @@ struct pmic *pfuze_common_init(unsigned char i2cbus)
pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
/* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
- pmic_reg_read(p, PUZE_100_SW1ABCONF, &reg);
+ pmic_reg_read(p, PFUZE100_SW1ABCONF, &reg);
reg &= ~SW1xCONF_DVSSPEED_MASK;
reg |= SW1xCONF_DVSSPEED_4US;
- pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
+ pmic_reg_write(p, PFUZE100_SW1ABCONF, reg);
/* Set SW1C standby voltage to 0.975V */
pmic_reg_read(p, PFUZE100_SW1CSTBY, &reg);
diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index 2ee8210..e20cd91 100644
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -768,12 +768,40 @@ int board_init(void)
static struct pmic *pfuze;
int power_init_board(void)
{
- unsigned int value;
+ unsigned int value, ret;
pfuze = pfuze_common_init(I2C_PMIC);
if (!pfuze)
return -ENODEV;
+ ret = pfuze_mode_init(pfuze, APS_PFM);
+ if (ret < 0)
+ return ret;
+
+ /* set SW1AB staby volatage 0.975V*/
+ pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &value);
+ value &= ~0x3f;
+ value |= 0x1b;
+ pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, value);
+
+ /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &value);
+ value &= ~0xc0;
+ value |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, value);
+
+ /* set SW1C staby volatage 0.975V*/
+ pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &value);
+ value &= ~0x3f;
+ value |= 0x1b;
+ pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, value);
+
+ /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &value);
+ value &= ~0xc0;
+ value |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1CCONF, value);
+
if (is_mx6dqp()) {
/* set SW2 staby volatage 0.975V*/
pmic_reg_read(pfuze, PFUZE100_SW2STBY, &value);
@@ -782,7 +810,7 @@ int power_init_board(void)
pmic_reg_write(pfuze, PFUZE100_SW2STBY, value);
}
- return pfuze_mode_init(pfuze, APS_PFM);
+ return 0;
}
#ifdef CONFIG_LDO_BYPASS_CHECK
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 03f6805..eedeb94 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -1025,6 +1025,30 @@ int power_init_board(void)
reg |= LDOB_3_00V;
pmic_reg_write(pfuze, PFUZE100_VGEN5VOL, reg);
+ /* set SW1AB staby volatage 0.975V*/
+ pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= 0x1b;
+ pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+ /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
+ /* set SW1C staby volatage 0.975V*/
+ pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= 0x1b;
+ pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+ /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
return 0;
}
diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c
index c721055..76a991f 100644
--- a/board/freescale/mx6slevk/mx6slevk.c
+++ b/board/freescale/mx6slevk/mx6slevk.c
@@ -380,11 +380,41 @@ struct i2c_pads_info i2c_pad_info1 = {
static struct pmic *pfuze;
int power_init_board(void)
{
+ unsigned int reg, ret;
+
pfuze = pfuze_common_init(I2C_PMIC);
if (!pfuze)
return -ENODEV;
- return pfuze_mode_init(pfuze, APS_PFM);
+ ret = pfuze_mode_init(pfuze, APS_PFM);
+ if (ret < 0)
+ return ret;
+
+ /* set SW1AB staby volatage 0.975V */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= 0x1b;
+ pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+ /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
+ /* set SW1C staby volatage 0.975V */
+ pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= 0x1b;
+ pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+ /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
+ return 0;
}
#ifdef CONFIG_LDO_BYPASS_CHECK
diff --git a/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c b/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c
index db0de6e..3d23408 100644
--- a/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c
+++ b/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c
@@ -107,11 +107,40 @@ struct i2c_pads_info i2c_pad_info2 = {
static struct pmic *pfuze;
int power_init_board(void)
{
+ unsigned int reg, ret;
pfuze = pfuze_common_init(I2C_PMIC);
if (!pfuze)
return -ENODEV;
- return pfuze_mode_init(pfuze, APS_PFM);
+ ret = pfuze_mode_init(pfuze, APS_PFM);
+ if (ret < 0)
+ return ret;
+
+ /* set SW1AB staby volatage 0.975V */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= PFUZE100_SW1ABC_SETP(9750);
+ pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+ /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
+ /* set SW1C staby volatage 0.975V */
+ pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= PFUZE100_SW1ABC_SETP(9750);
+ pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+ /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
+ return 0;
}
#ifdef CONFIG_LDO_BYPASS_CHECK
diff --git a/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c b/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c
index 7236d57..88318ed 100644
--- a/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c
+++ b/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c
@@ -112,11 +112,41 @@ struct i2c_pads_info i2c_pad_info2 = {
static struct pmic *pfuze;
int power_init_board(void)
{
+ unsigned int ret, reg;
+
pfuze = pfuze_common_init(I2C_PMIC);
if (!pfuze)
return -ENODEV;
- return pfuze_mode_init(pfuze, APS_PFM);
+ ret = pfuze_mode_init(pfuze, APS_PFM);
+ if (ret < 0)
+ return ret;
+
+ /* set SW1AB staby volatage 0.975V */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= PFUZE100_SW1ABC_SETP(9750);
+ pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+ /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
+ /* set SW1C staby volatage 0.975V */
+ pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= PFUZE100_SW1ABC_SETP(9750);
+ pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+
+ /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
+ return 0;
}
#ifdef CONFIG_LDO_BYPASS_CHECK
diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
index 6a026d4..6019dde 100644
--- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
+++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c
@@ -132,12 +132,30 @@ int power_init_board(void)
if (ret < 0)
return ret;
+ /* set SW1AB standby volatage 0.975V */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &reg);
+ reg &= ~0x3f;
+ reg |= PFUZE100_SW1ABC_SETP(9750);
+ pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+
+ /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
/* set SW1C standby volatage 1.10V */
pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
reg &= ~0x3f;
reg |= PFUZE100_SW1ABC_SETP(11000);
pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+ /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
/* Enable power of VGEN5 3V3, needed for SD3 */
pmic_reg_read(pfuze, PFUZE100_VGEN5VOL, &reg);
reg &= ~LDO_VOL_MASK;
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 621f205..4e545b5 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -475,12 +475,24 @@ int power_init_board(void)
reg |= PFUZE100_SW1ABC_SETP(11000);
pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg);
+ /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg);
+
/* set SW1C standby volatage 1.10V */
pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &reg);
reg &= ~0x3f;
reg |= PFUZE100_SW1ABC_SETP(11000);
pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg);
+ /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */
+ pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &reg);
+ reg &= ~0xc0;
+ reg |= 0x40;
+ pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg);
+
/* Enable power of VGEN5 3V3, needed for SD3 */
pmic_reg_read(pfuze, PFUZE100_VGEN5VOL, &reg);
reg &= ~LDO_VOL_MASK;