From dd842f32b6d8d770e844790643ece352f92b8c5e Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Wed, 29 Apr 2015 10:52:52 +0800 Subject: MLK-10774-53 imx: update setting pmic volatage We should not rely on pfuze_common_init to set the voltage, may be we should remove the voltage settings in pfuze_common_init. This patch is to setting the voltages in power_init_board. Signed-off-by: Peng Fan --- board/freescale/common/pfuze.c | 4 +-- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 32 ++++++++++++++++++++-- board/freescale/mx6sabresd/mx6sabresd.c | 24 ++++++++++++++++ board/freescale/mx6slevk/mx6slevk.c | 32 +++++++++++++++++++++- .../freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c | 31 ++++++++++++++++++++- .../freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c | 32 +++++++++++++++++++++- board/freescale/mx6sxsabreauto/mx6sxsabreauto.c | 18 ++++++++++++ board/freescale/mx6sxsabresd/mx6sxsabresd.c | 12 ++++++++ 8 files changed, 178 insertions(+), 7 deletions(-) (limited to 'board') diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c index 4980bf7..d6a209e 100644 --- a/board/freescale/common/pfuze.c +++ b/board/freescale/common/pfuze.c @@ -71,10 +71,10 @@ struct pmic *pfuze_common_init(unsigned char i2cbus) pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg); /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ - pmic_reg_read(p, PUZE_100_SW1ABCONF, ®); + pmic_reg_read(p, PFUZE100_SW1ABCONF, ®); reg &= ~SW1xCONF_DVSSPEED_MASK; reg |= SW1xCONF_DVSSPEED_4US; - pmic_reg_write(p, PUZE_100_SW1ABCONF, reg); + pmic_reg_write(p, PFUZE100_SW1ABCONF, reg); /* Set SW1C standby voltage to 0.975V */ pmic_reg_read(p, PFUZE100_SW1CSTBY, ®); diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 2ee8210..e20cd91 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -768,12 +768,40 @@ int board_init(void) static struct pmic *pfuze; int power_init_board(void) { - unsigned int value; + unsigned int value, ret; pfuze = pfuze_common_init(I2C_PMIC); if (!pfuze) return -ENODEV; + ret = pfuze_mode_init(pfuze, APS_PFM); + if (ret < 0) + return ret; + + /* set SW1AB staby volatage 0.975V*/ + pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, &value); + value &= ~0x3f; + value |= 0x1b; + pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, value); + + /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, &value); + value &= ~0xc0; + value |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, value); + + /* set SW1C staby volatage 0.975V*/ + pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, &value); + value &= ~0x3f; + value |= 0x1b; + pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, value); + + /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1CCONF, &value); + value &= ~0xc0; + value |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1CCONF, value); + if (is_mx6dqp()) { /* set SW2 staby volatage 0.975V*/ pmic_reg_read(pfuze, PFUZE100_SW2STBY, &value); @@ -782,7 +810,7 @@ int power_init_board(void) pmic_reg_write(pfuze, PFUZE100_SW2STBY, value); } - return pfuze_mode_init(pfuze, APS_PFM); + return 0; } #ifdef CONFIG_LDO_BYPASS_CHECK diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 03f6805..eedeb94 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -1025,6 +1025,30 @@ int power_init_board(void) reg |= LDOB_3_00V; pmic_reg_write(pfuze, PFUZE100_VGEN5VOL, reg); + /* set SW1AB staby volatage 0.975V*/ + pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, ®); + reg &= ~0x3f; + reg |= 0x1b; + pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg); + + /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg); + + /* set SW1C staby volatage 0.975V*/ + pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, ®); + reg &= ~0x3f; + reg |= 0x1b; + pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg); + + /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1CCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg); + return 0; } diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index c721055..76a991f 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -380,11 +380,41 @@ struct i2c_pads_info i2c_pad_info1 = { static struct pmic *pfuze; int power_init_board(void) { + unsigned int reg, ret; + pfuze = pfuze_common_init(I2C_PMIC); if (!pfuze) return -ENODEV; - return pfuze_mode_init(pfuze, APS_PFM); + ret = pfuze_mode_init(pfuze, APS_PFM); + if (ret < 0) + return ret; + + /* set SW1AB staby volatage 0.975V */ + pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, ®); + reg &= ~0x3f; + reg |= 0x1b; + pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg); + + /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg); + + /* set SW1C staby volatage 0.975V */ + pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, ®); + reg &= ~0x3f; + reg |= 0x1b; + pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg); + + /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1CCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg); + + return 0; } #ifdef CONFIG_LDO_BYPASS_CHECK diff --git a/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c b/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c index db0de6e..3d23408 100644 --- a/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c +++ b/board/freescale/mx6sx_17x17_arm2/mx6sx_17x17_arm2.c @@ -107,11 +107,40 @@ struct i2c_pads_info i2c_pad_info2 = { static struct pmic *pfuze; int power_init_board(void) { + unsigned int reg, ret; pfuze = pfuze_common_init(I2C_PMIC); if (!pfuze) return -ENODEV; - return pfuze_mode_init(pfuze, APS_PFM); + ret = pfuze_mode_init(pfuze, APS_PFM); + if (ret < 0) + return ret; + + /* set SW1AB staby volatage 0.975V */ + pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, ®); + reg &= ~0x3f; + reg |= PFUZE100_SW1ABC_SETP(9750); + pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg); + + /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg); + + /* set SW1C staby volatage 0.975V */ + pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, ®); + reg &= ~0x3f; + reg |= PFUZE100_SW1ABC_SETP(9750); + pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg); + + /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1CCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg); + + return 0; } #ifdef CONFIG_LDO_BYPASS_CHECK diff --git a/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c b/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c index 7236d57..88318ed 100644 --- a/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c +++ b/board/freescale/mx6sx_19x19_arm2/mx6sx_19x19_arm2.c @@ -112,11 +112,41 @@ struct i2c_pads_info i2c_pad_info2 = { static struct pmic *pfuze; int power_init_board(void) { + unsigned int ret, reg; + pfuze = pfuze_common_init(I2C_PMIC); if (!pfuze) return -ENODEV; - return pfuze_mode_init(pfuze, APS_PFM); + ret = pfuze_mode_init(pfuze, APS_PFM); + if (ret < 0) + return ret; + + /* set SW1AB staby volatage 0.975V */ + pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, ®); + reg &= ~0x3f; + reg |= PFUZE100_SW1ABC_SETP(9750); + pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg); + + /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg); + + /* set SW1C staby volatage 0.975V */ + pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, ®); + reg &= ~0x3f; + reg |= PFUZE100_SW1ABC_SETP(9750); + pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg); + + /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1CCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg); + + return 0; } #ifdef CONFIG_LDO_BYPASS_CHECK diff --git a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c index 6a026d4..6019dde 100644 --- a/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c +++ b/board/freescale/mx6sxsabreauto/mx6sxsabreauto.c @@ -132,12 +132,30 @@ int power_init_board(void) if (ret < 0) return ret; + /* set SW1AB standby volatage 0.975V */ + pmic_reg_read(pfuze, PFUZE100_SW1ABSTBY, ®); + reg &= ~0x3f; + reg |= PFUZE100_SW1ABC_SETP(9750); + pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg); + + /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg); + /* set SW1C standby volatage 1.10V */ pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, ®); reg &= ~0x3f; reg |= PFUZE100_SW1ABC_SETP(11000); pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg); + /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1CCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg); + /* Enable power of VGEN5 3V3, needed for SD3 */ pmic_reg_read(pfuze, PFUZE100_VGEN5VOL, ®); reg &= ~LDO_VOL_MASK; diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 621f205..4e545b5 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -475,12 +475,24 @@ int power_init_board(void) reg |= PFUZE100_SW1ABC_SETP(11000); pmic_reg_write(pfuze, PFUZE100_SW1ABSTBY, reg); + /* set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1ABCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1ABCONF, reg); + /* set SW1C standby volatage 1.10V */ pmic_reg_read(pfuze, PFUZE100_SW1CSTBY, ®); reg &= ~0x3f; reg |= PFUZE100_SW1ABC_SETP(11000); pmic_reg_write(pfuze, PFUZE100_SW1CSTBY, reg); + /* set SW1C/VDDSOC step ramp up time to from 16us to 4us/25mV */ + pmic_reg_read(pfuze, PFUZE100_SW1CCONF, ®); + reg &= ~0xc0; + reg |= 0x40; + pmic_reg_write(pfuze, PFUZE100_SW1CCONF, reg); + /* Enable power of VGEN5 3V3, needed for SD3 */ pmic_reg_read(pfuze, PFUZE100_VGEN5VOL, ®); reg &= ~LDO_VOL_MASK; -- cgit v1.1