Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (145 commits)
  beagleboard: enable HUB power on all variants of the BeagleBoard
  dm3730: enable dpll5
  ehci-hcd: Allow cleanups to happen gracefully on a timeout.
  OMAP3: Add DSS driver for OMAP3
  led: Remove state-saving of led for toggle functionality and add toggle option to led command
  led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all'
  led: correct off/on locations in structure
  led: added cmd_led to Makefile
  BeagleBoard: fix LED 0/1 in driver
  Corrected LED name match finding avoiding extraneous Usage printouts
  BeagleBoard: config: updated default configuration
  BeagleBoard: config: Enabled multibus support for I2C in configuration
  BeagleBoard: config: add optargs/buddy/camera
  BeagleBoard: config: increase command-line functionality
  BeagleBoard: config: make mtest run
  BeagleBoard: config: enable DSS
  BeagleBoard: config: enable asix driver and dhcp
  BeagleBoard: config: enable networking
  BeagleBoard: config: decrease bootdelay to 2 seconds
  BeagleBoard: config: use uImage.beagle for tftp
  BeagleBoard: config: hardcode MAC for onboard SMSC
  BeagleBoard: config: load kernel from MMC ext, not FAT
  BeagleBoard: Configure DVI/S-video
  BeagleBoard: Added userbutton command
  BeagleBoard: turn off clocks in ehci_stop
  USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
  beagleboard: add support for xM revision C
  beagle: pass expansionboard name in bootargs
  OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
  OMAP3 Beagle Pin Mux initialization glitch fix
  da850: modifications for Logic PD Rev.3 AM18xx EVM
  da850: fix the channel number for EMAC teardown init
  da850: add support for Spectrum Digital AM18xx EVM
  da850: add support to wake up DSP during board init
  da850: modify the U-Boot prompt string
  da850: add NOR boot mode support
  da8xx: add support for multiple PLL controllers
  da850: indicate cache usage disable in config file
  dm365: modify boot prompt from dm365 to dm36x
  dm365: disable cache usage due to coherency issues
  dm6446: disable cache usage due to coherency issues
  OMAP3: Remove legacy mmc driver
  devkit8000: Use generic MMC driver
  TI OMAP3 SDP3430: Use generic MMC driver
  AM3517 CraneBoard: Use generic MMC driver
  OMAP3: pandora: Use generic MMC driver
  OMAP3: Zoom2: Use generic MMC driver
  OMAP3: Zoom1: Use generic MMC driver
  OMAP3: DIG297: Use generic MMC driver
  OMAP3: CM-T35: Use generic MMC driver
  am3517evm: Use generic MMC driver
  omap3evm: Use generic MMC driver
  omap3:clock: check cpu_family before enabling clks for IVA & CAM
  omap3:clock: configure GFX clock to 200MHz for AM/DM37x
  OMAP3/4: Increase console I/O buffer size
  PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE
  PXA: Fix CSB226, fix monitor length
  PXA: Fix Lubbock, remove redundant parenthesis
  armv7: cache: remove flush on un-aligned invalidate
  armv7: stronger barrier for cache-maintenance operations
  omap: enable caches at system start-up
  arm: do not force d-cache enable on all boards
  ORIGEN: Add MMC SPL support
  ARMV7: Add support for Samsung ORIGEN board
  i2c:gpio:s5p: Enable I2C GPIO on the GONI target
  i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)
  Tegra2: Use clock and pinmux functions to simplify code
  Tegra2: Add additional pin multiplexing features
  Tegra2: Add more clock support
  Tegra2: Add microsecond timer function
  ARM: remove broken "at91rm9200dk" board
  ARM: remove broken "m501sk" board
  ARM: remove broken "kb9202" board
  ARM: remove broken "csb637" board
  ARM: remove broken "cmc_pu2" board
  ARM: remove broken "at91cap9adk" board
  ARM: remove broken "voiceblue" board
  ARM: remove broken "smdk2400" board
  ARM: remove broken "sbc2410x" board
  ARM: remove broken "netstar" board
  ARM: remove broken "mx1fs2" board
  ARM: remove broken "lpd7a40x" boards
  ARM: remove broken "edb93xx" boards
  ARM: remove broken "B2" board
  ARM: remove broken "armadillo" board
  ARM: remove broken "assabet" board
  ARM: versatile: drop warnings
  IMX: scb9328: drop warnings
  MX31: imx31_litekit: make use of GPIO framework
  MX31: mx31ads: make use of GPIO framework
  MX5: mx51evk: make use of GPIO framework
  MX35: mx35pdk: make use of GPIO framework
  MX5: mx53loco: make use of GPIO framework
  MX5: mx53evk: make use of GPIO framework
  MX5: vision2: make use of GPIO framework
  MX5: mx53smd: make use of GPIO framework
  MX5: mx53ard: make use of GPIO framework
  MX25: zmx25: make use of GPIO framework
  MX5: efikamx: make use of GPIO framework
  MX31: QONG: make use of GPIO framework
  MX35: make use of GPIO framework for MX35 processor
  MX5: make use of GPIO framework for MX5 processor
  MX31: make use of GPIO framework for MX31 processor
  MX25: make use of GPIO framework for MX25 processor
  IMX: uniform GPIO interface using GPIO framework
  MX: MX35 / MX5: uniform clock command with powerpc
  MX35: MX35PDK: support additional RAM on CSD1
  mx53: ddr3: Update DD3 initialization
  ARM: MX51: PLL errata workaround
  ARM: versatilepb : drop warnings due to double definitions
  omap4: increase SRAM budget to fix build error
  omap4: fix build warning due to signed unsigned comparison
  mkimage: Fix 'Unknown OMAP image type - 5'
  omap: fix gpio related build breaks
  gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
  SMDKV310: MMC SPL: Remove unwanted dummy functions
  SMDKV310: Fix undefined reference error
  SMDKV310: Fix build error for smdkv310 board
  gpio:samsung s5p_ suffix add for GPIO functions
  mmc: S5P: Support DMA restarts at buffer boundaries
  SMDKV310: Fix host compilation of mkv310_image
  arm: fix bd pointer dereference prior initialization
  arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
  mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
  MX31: removed warnings due to clock.h
  integrator: convert to new build system
  integratorcp: make the board compile
  integratorap: remove hardcoded 32MB memory cmdline
  ...

1 files changed, 27 insertions, 44 deletions

diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index 565c4d0..17a2558 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -29,7 +29,7 @@
 #include <asm/arch/mx5x_pins.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/iomux.h>
-#include <mxc_gpio.h>
+#include <asm/gpio.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/errno.h>
 #include <i2c.h>
@@ -69,9 +69,9 @@ void hw_watchdog_reset(void)
 	int val;
 
 	/* toggle watchdog trigger pin */
-	val = mxc_gpio_get(66);
+	val = gpio_get_value(66);
 	val = val ? 0 : 1;
-	mxc_gpio_set(66, val);
+	gpio_set_value(66, val);
 }
 #endif
 
@@ -233,30 +233,22 @@ static void reset_peripherals(int reset)
 	if (reset) {
 
 		/* reset_n is on NANDF_D15 */
-		mxc_gpio_set(89, 0);
-		mxc_gpio_direction(89, MXC_GPIO_DIRECTION_OUT);
+		gpio_direction_output(89, 0);
 
 #ifdef CONFIG_VISION2_HW_1_0
 		/*
 		 * set FEC Configuration lines
 		 * set levels of FEC config lines
 		 */
-		mxc_gpio_set(75, 0);
-		mxc_gpio_set(74, 1);
-		mxc_gpio_set(95, 1);
-		mxc_gpio_direction(75, MXC_GPIO_DIRECTION_OUT);
-		mxc_gpio_direction(74, MXC_GPIO_DIRECTION_OUT);
-		mxc_gpio_direction(95, MXC_GPIO_DIRECTION_OUT);
+		gpio_direction_output(75, 0);
+		gpio_direction_output(74, 1);
+		gpio_direction_output(95, 1);
 
 		/* set direction of FEC config lines */
-		mxc_gpio_set(59, 0);
-		mxc_gpio_set(60, 0);
-		mxc_gpio_set(61, 0);
-		mxc_gpio_set(55, 1);
-		mxc_gpio_direction(59, MXC_GPIO_DIRECTION_OUT);
-		mxc_gpio_direction(60, MXC_GPIO_DIRECTION_OUT);
-		mxc_gpio_direction(61, MXC_GPIO_DIRECTION_OUT);
-		mxc_gpio_direction(55, MXC_GPIO_DIRECTION_OUT);
+		gpio_direction_output(59, 0);
+		gpio_direction_output(60, 0);
+		gpio_direction_output(61, 0);
+		gpio_direction_output(55, 1);
 
 		/* FEC_RXD1 - sel GPIO (2-23) for configuration -> 1 */
 		mxc_request_iomux(MX51_PIN_EIM_EB3, IOMUX_CONFIG_ALT1);
@@ -283,7 +275,7 @@ static void reset_peripherals(int reset)
 			PAD_CTL_DRV_VOT_HIGH | PAD_CTL_DRV_MAX);
 	} else {
 		/* set FEC Control lines */
-		mxc_gpio_direction(89, MXC_GPIO_DIRECTION_IN);
+		gpio_direction_input(89);
 		udelay(500);
 
 #ifdef CONFIG_VISION2_HW_1_0
@@ -438,31 +430,23 @@ static void setup_gpios(void)
 	 * Set GPIO1_4 to high and output; it is used to reset
 	 * the system on reboot
 	 */
-	mxc_gpio_set(4, 1);
-	mxc_gpio_direction(4, MXC_GPIO_DIRECTION_OUT);
+	gpio_direction_output(4, 1);
 
-	mxc_gpio_set(7, 0);
-	mxc_gpio_direction(7, MXC_GPIO_DIRECTION_OUT);
+	gpio_direction_output(7, 0);
 	for (i = 65; i < 71; i++) {
-		mxc_gpio_set(i, 0);
-		mxc_gpio_direction(i, MXC_GPIO_DIRECTION_OUT);
+		gpio_direction_output(i, 0);
 	}
 
-	mxc_gpio_set(94, 0);
-	mxc_gpio_direction(94, MXC_GPIO_DIRECTION_OUT);
+	gpio_direction_output(94, 0);
 
 	/* Set POWER_OFF high */
-	mxc_gpio_set(91, 1);
-	mxc_gpio_direction(91, MXC_GPIO_DIRECTION_OUT);
+	gpio_direction_output(91, 1);
 
-	mxc_gpio_set(90, 0);
-	mxc_gpio_direction(90, MXC_GPIO_DIRECTION_OUT);
+	gpio_direction_output(90, 0);
 
-	mxc_gpio_set(122, 0);
-	mxc_gpio_direction(122, MXC_GPIO_DIRECTION_OUT);
+	gpio_direction_output(122, 0);
 
-	mxc_gpio_set(121, 1);
-	mxc_gpio_direction(121, MXC_GPIO_DIRECTION_OUT);
+	gpio_direction_output(121, 1);
 
 	WATCHDOG_RESET();
 }
@@ -551,7 +535,7 @@ int get_mmc_getcd(u8 *cd, struct mmc *mmc)
 	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 
 	if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR)
-		*cd = mxc_gpio_get(0);
+		*cd = gpio_get_value(0);
 	else
 		*cd = 0;
 
@@ -623,8 +607,7 @@ int board_early_init_f(void)
 	init_drive_strength();
 
 	/* Setup debug led */
-	mxc_gpio_set(6, 0);
-	mxc_gpio_direction(6, MXC_GPIO_DIRECTION_OUT);
+	gpio_direction_output(6, 0);
 	mxc_request_iomux(MX51_PIN_GPIO1_6, IOMUX_CONFIG_ALT0);
 	mxc_iomux_set_pad(MX51_PIN_GPIO1_6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
 
@@ -644,12 +627,12 @@ int board_early_init_f(void)
 static void backlight(int on)
 {
 	if (on) {
-		mxc_gpio_set(65, 1);
+		gpio_set_value(65, 1);
 		udelay(10000);
-		mxc_gpio_set(68, 1);
+		gpio_set_value(68, 1);
 	} else {
-		mxc_gpio_set(65, 0);
-		mxc_gpio_set(68, 0);
+		gpio_set_value(65, 0);
+		gpio_set_value(68, 0);
 	}
 }
 
@@ -660,7 +643,7 @@ void lcd_enable(void)
 	mxc_request_iomux(MX51_PIN_DI1_PIN2, IOMUX_CONFIG_ALT0);
 	mxc_request_iomux(MX51_PIN_DI1_PIN3, IOMUX_CONFIG_ALT0);
 
-	mxc_gpio_set(2, 1);
+	gpio_set_value(2, 1);
 	mxc_request_iomux(MX51_PIN_GPIO1_2, IOMUX_CONFIG_ALT0);
 
 	ret = mx51_fb_init(&nec_nl6448bc26_09c);