diff options
author | Wolfgang Denk <wd@denx.de> | 2011-09-04 21:12:18 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2011-09-04 21:12:18 +0200 |
commit | 6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833 (patch) | |
tree | 154fe4abb74f5e03962506168c7d8c4869f7ac8a /board/efikamx/efikamx.c | |
parent | dc344589ded4fb4d63ba7f0cdf670e2ffcf5e5a0 (diff) | |
parent | 38a77c3adb3ee559b135217769f5c49f3c8b62c9 (diff) | |
download | u-boot-imx-6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833.zip u-boot-imx-6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833.tar.gz u-boot-imx-6dfbf49c6dc3687efbc6d7f9e25bb46ed2d6c833.tar.bz2 |
Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm: (145 commits)
beagleboard: enable HUB power on all variants of the BeagleBoard
dm3730: enable dpll5
ehci-hcd: Allow cleanups to happen gracefully on a timeout.
OMAP3: Add DSS driver for OMAP3
led: Remove state-saving of led for toggle functionality and add toggle option to led command
led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all'
led: correct off/on locations in structure
led: added cmd_led to Makefile
BeagleBoard: fix LED 0/1 in driver
Corrected LED name match finding avoiding extraneous Usage printouts
BeagleBoard: config: updated default configuration
BeagleBoard: config: Enabled multibus support for I2C in configuration
BeagleBoard: config: add optargs/buddy/camera
BeagleBoard: config: increase command-line functionality
BeagleBoard: config: make mtest run
BeagleBoard: config: enable DSS
BeagleBoard: config: enable asix driver and dhcp
BeagleBoard: config: enable networking
BeagleBoard: config: decrease bootdelay to 2 seconds
BeagleBoard: config: use uImage.beagle for tftp
BeagleBoard: config: hardcode MAC for onboard SMSC
BeagleBoard: config: load kernel from MMC ext, not FAT
BeagleBoard: Configure DVI/S-video
BeagleBoard: Added userbutton command
BeagleBoard: turn off clocks in ehci_stop
USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
beagleboard: add support for xM revision C
beagle: pass expansionboard name in bootargs
OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
OMAP3 Beagle Pin Mux initialization glitch fix
da850: modifications for Logic PD Rev.3 AM18xx EVM
da850: fix the channel number for EMAC teardown init
da850: add support for Spectrum Digital AM18xx EVM
da850: add support to wake up DSP during board init
da850: modify the U-Boot prompt string
da850: add NOR boot mode support
da8xx: add support for multiple PLL controllers
da850: indicate cache usage disable in config file
dm365: modify boot prompt from dm365 to dm36x
dm365: disable cache usage due to coherency issues
dm6446: disable cache usage due to coherency issues
OMAP3: Remove legacy mmc driver
devkit8000: Use generic MMC driver
TI OMAP3 SDP3430: Use generic MMC driver
AM3517 CraneBoard: Use generic MMC driver
OMAP3: pandora: Use generic MMC driver
OMAP3: Zoom2: Use generic MMC driver
OMAP3: Zoom1: Use generic MMC driver
OMAP3: DIG297: Use generic MMC driver
OMAP3: CM-T35: Use generic MMC driver
am3517evm: Use generic MMC driver
omap3evm: Use generic MMC driver
omap3:clock: check cpu_family before enabling clks for IVA & CAM
omap3:clock: configure GFX clock to 200MHz for AM/DM37x
OMAP3/4: Increase console I/O buffer size
PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE
PXA: Fix CSB226, fix monitor length
PXA: Fix Lubbock, remove redundant parenthesis
armv7: cache: remove flush on un-aligned invalidate
armv7: stronger barrier for cache-maintenance operations
omap: enable caches at system start-up
arm: do not force d-cache enable on all boards
ORIGEN: Add MMC SPL support
ARMV7: Add support for Samsung ORIGEN board
i2c:gpio:s5p: Enable I2C GPIO on the GONI target
i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)
Tegra2: Use clock and pinmux functions to simplify code
Tegra2: Add additional pin multiplexing features
Tegra2: Add more clock support
Tegra2: Add microsecond timer function
ARM: remove broken "at91rm9200dk" board
ARM: remove broken "m501sk" board
ARM: remove broken "kb9202" board
ARM: remove broken "csb637" board
ARM: remove broken "cmc_pu2" board
ARM: remove broken "at91cap9adk" board
ARM: remove broken "voiceblue" board
ARM: remove broken "smdk2400" board
ARM: remove broken "sbc2410x" board
ARM: remove broken "netstar" board
ARM: remove broken "mx1fs2" board
ARM: remove broken "lpd7a40x" boards
ARM: remove broken "edb93xx" boards
ARM: remove broken "B2" board
ARM: remove broken "armadillo" board
ARM: remove broken "assabet" board
ARM: versatile: drop warnings
IMX: scb9328: drop warnings
MX31: imx31_litekit: make use of GPIO framework
MX31: mx31ads: make use of GPIO framework
MX5: mx51evk: make use of GPIO framework
MX35: mx35pdk: make use of GPIO framework
MX5: mx53loco: make use of GPIO framework
MX5: mx53evk: make use of GPIO framework
MX5: vision2: make use of GPIO framework
MX5: mx53smd: make use of GPIO framework
MX5: mx53ard: make use of GPIO framework
MX25: zmx25: make use of GPIO framework
MX5: efikamx: make use of GPIO framework
MX31: QONG: make use of GPIO framework
MX35: make use of GPIO framework for MX35 processor
MX5: make use of GPIO framework for MX5 processor
MX31: make use of GPIO framework for MX31 processor
MX25: make use of GPIO framework for MX25 processor
IMX: uniform GPIO interface using GPIO framework
MX: MX35 / MX5: uniform clock command with powerpc
MX35: MX35PDK: support additional RAM on CSD1
mx53: ddr3: Update DD3 initialization
ARM: MX51: PLL errata workaround
ARM: versatilepb : drop warnings due to double definitions
omap4: increase SRAM budget to fix build error
omap4: fix build warning due to signed unsigned comparison
mkimage: Fix 'Unknown OMAP image type - 5'
omap: fix gpio related build breaks
gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
SMDKV310: MMC SPL: Remove unwanted dummy functions
SMDKV310: Fix undefined reference error
SMDKV310: Fix build error for smdkv310 board
gpio:samsung s5p_ suffix add for GPIO functions
mmc: S5P: Support DMA restarts at buffer boundaries
SMDKV310: Fix host compilation of mkv310_image
arm: fix bd pointer dereference prior initialization
arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
MX31: removed warnings due to clock.h
integrator: convert to new build system
integratorcp: make the board compile
integratorap: remove hardcoded 32MB memory cmdline
...
Diffstat (limited to 'board/efikamx/efikamx.c')
-rw-r--r-- | board/efikamx/efikamx.c | 62 |
1 files changed, 24 insertions, 38 deletions
diff --git a/board/efikamx/efikamx.c b/board/efikamx/efikamx.c index 4b36918..5be1f6c 100644 --- a/board/efikamx/efikamx.c +++ b/board/efikamx/efikamx.c @@ -27,7 +27,7 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/mx5x_pins.h> #include <asm/arch/iomux.h> -#include <mxc_gpio.h> +#include <asm/gpio.h> #include <asm/errno.h> #include <asm/arch/sys_proto.h> #include <asm/arch/crm_regs.h> @@ -76,28 +76,23 @@ u32 get_efika_rev(void) * rev1.4: 1,0,0 */ mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), - MXC_GPIO_DIRECTION_OUT); /* set to 1 in order to get correct value on board rev1.1 */ - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), 1); mxc_request_iomux(MX51_PIN_NANDF_CS0, IOMUX_CONFIG_GPIO); mxc_iomux_set_pad(MX51_PIN_NANDF_CS0, PAD_CTL_100K_PU); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0), - MXC_GPIO_DIRECTION_IN); - rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0; + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0)); + rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS0))) << 0; mxc_request_iomux(MX51_PIN_NANDF_CS1, IOMUX_CONFIG_GPIO); mxc_iomux_set_pad(MX51_PIN_NANDF_CS1, PAD_CTL_100K_PU); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1), - MXC_GPIO_DIRECTION_IN); - rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1; + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1)); + rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_CS1))) << 1; mxc_request_iomux(MX51_PIN_NANDF_RB3, IOMUX_CONFIG_GPIO); mxc_iomux_set_pad(MX51_PIN_NANDF_RB3, PAD_CTL_100K_PU); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3), - MXC_GPIO_DIRECTION_IN); - rev |= (!!mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2; + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3)); + rev |= (!!gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_NANDF_RB3))) << 2; return (~rev & 0x7) + 1; } @@ -154,15 +149,11 @@ static void setup_iomux_spi(void) /* Configure SS0 as a GPIO */ mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_GPIO); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), - MXC_GPIO_DIRECTION_OUT); - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS0), 0); /* Configure SS1 as a GPIO */ mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_GPIO); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), - MXC_GPIO_DIRECTION_OUT); - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSPI1_SS1), 1); /* 000: Select mux mode: ALT0 mux port: SS2 of instance: ecspi1. */ mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0); @@ -282,9 +273,9 @@ int board_mmc_getcd(u8 *absent, struct mmc *mmc) struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; if (cfg->esdhc_base == MMC_SDHC1_BASE_ADDR) - *absent = mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); + *absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); else - *absent = mxc_gpio_get(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8)); + *absent = gpio_get_value(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8)); return 0; } @@ -307,10 +298,8 @@ int board_mmc_init(bd_t *bis) PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE | PAD_CTL_SRE_FAST); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0), - MXC_GPIO_DIRECTION_IN); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1), - MXC_GPIO_DIRECTION_IN); + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_0)); + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_1)); /* Internal SDHC1 IOMUX + SDHC2 IOMUX on old boards */ if (get_efika_rev() < EFIKAMX_BOARD_REV_12) { @@ -389,10 +378,8 @@ int board_mmc_init(bd_t *bis) PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_NONE | PAD_CTL_SRE_FAST); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8), - MXC_GPIO_DIRECTION_IN); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7), - MXC_GPIO_DIRECTION_IN); + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_8)); + gpio_direction_input(IOMUX_TO_GPIO(MX51_PIN_GPIO1_7)); ret = fsl_esdhc_initialize(bis, &esdhc_cfg[0]); if (!ret) @@ -508,25 +495,24 @@ void setup_iomux_led(void) { /* Blue LED */ mxc_request_iomux(MX51_PIN_CSI1_D9, IOMUX_CONFIG_ALT3); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), - MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), 0); + /* Green LED */ mxc_request_iomux(MX51_PIN_CSI1_VSYNC, IOMUX_CONFIG_ALT3); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), - MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), 0); + /* Red LED */ mxc_request_iomux(MX51_PIN_CSI1_HSYNC, IOMUX_CONFIG_ALT3); - mxc_gpio_direction(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), - MXC_GPIO_DIRECTION_OUT); + gpio_direction_output(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), 0); } void efikamx_toggle_led(uint32_t mask) { - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_D9), mask & EFIKAMX_LED_BLUE); - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_VSYNC), mask & EFIKAMX_LED_GREEN); - mxc_gpio_set(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), + gpio_set_value(IOMUX_TO_GPIO(MX51_PIN_CSI1_HSYNC), mask & EFIKAMX_LED_RED); } |