ARM: uniphier: add PH1-Pro5 support

The DDR SDRAM initialization code has not been mainlined yet, but
U-Boot proper should work.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

4 files changed, 28 insertions, 1 deletions

diff --git a/arch/arm/mach-uniphier/include/mach/boot-device.h b/arch/arm/mach-uniphier/include/mach/boot-device.h
index eddb25f..3cbe773 100644
--- a/arch/arm/mach-uniphier/include/mach/boot-device.h
+++ b/arch/arm/mach-uniphier/include/mach/boot-device.h
@@ -14,8 +14,10 @@ struct boot_device_info {
 
 u32 ph1_sld3_boot_device(void);
 u32 ph1_ld4_boot_device(void);
+u32 ph1_pro5_boot_device(void);
 
 void ph1_sld3_boot_mode_show(void);
 void ph1_ld4_boot_mode_show(void);
+void ph1_pro5_boot_mode_show(void);
 
 #endif /* _ASM_BOOT_DEVICE_H_ */
diff --git a/arch/arm/mach-uniphier/include/mach/init.h b/arch/arm/mach-uniphier/include/mach/init.h
index 228cbb1..914182d 100644
--- a/arch/arm/mach-uniphier/include/mach/init.h
+++ b/arch/arm/mach-uniphier/include/mach/init.h
@@ -26,6 +26,7 @@ int ph1_sld3_init(const struct uniphier_board_data *bd);
 int ph1_ld4_init(const struct uniphier_board_data *bd);
 int ph1_pro4_init(const struct uniphier_board_data *bd);
 int ph1_sld8_init(const struct uniphier_board_data *bd);
+int ph1_pro5_init(const struct uniphier_board_data *bd);
 
 #if defined(CONFIG_MICRO_SUPPORT_CARD)
 int ph1_sld3_sbc_init(const struct uniphier_board_data *bd);
@@ -63,6 +64,7 @@ int ph1_sld3_enable_dpll_ssc(const struct uniphier_board_data *bd);
 int ph1_ld4_enable_dpll_ssc(const struct uniphier_board_data *bd);
 
 int ph1_ld4_early_clk_init(const struct uniphier_board_data *bd);
+int ph1_pro5_early_clk_init(const struct uniphier_board_data *bd);
 
 int ph1_sld3_early_pin_init(const struct uniphier_board_data *bd);
 
@@ -74,9 +76,11 @@ void ph1_sld3_pin_init(void);
 void ph1_ld4_pin_init(void);
 void ph1_pro4_pin_init(void);
 void ph1_sld8_pin_init(void);
+void ph1_pro5_pin_init(void);
 
 void ph1_ld4_clk_init(void);
 void ph1_pro4_clk_init(void);
+void ph1_pro5_clk_init(void);
 
 #define pr_err(fmt, args...)	printf(fmt, ##args)
 
diff --git a/arch/arm/mach-uniphier/include/mach/sc-regs.h b/arch/arm/mach-uniphier/include/mach/sc-regs.h
index 9d697b1..903e405 100644
--- a/arch/arm/mach-uniphier/include/mach/sc-regs.h
+++ b/arch/arm/mach-uniphier/include/mach/sc-regs.h
@@ -15,6 +15,10 @@
 #define SC_BASE_ADDR			0x61840000
 #endif
 
+#define SC_DPLLOSCCTRL			(SC_BASE_ADDR | 0x1110)
+#define SC_DPLLOSCCTRL_DPLLST		(0x1 << 1)
+#define SC_DPLLOSCCTRL_DPLLEN		(0x1 << 0)
+
 #define SC_DPLLCTRL			(SC_BASE_ADDR | 0x1200)
 #define SC_DPLLCTRL_SSC_EN		(0x1 << 31)
 #define SC_DPLLCTRL_FOUTMODE_MASK        (0xf << 16)
@@ -43,6 +47,7 @@
 #define SC_RSTCTRL_NRST_ETHER		(0x1 << 12)
 #define SC_RSTCTRL_NRST_STDMAC		(0x1 << 10)
 #define SC_RSTCTRL_NRST_GIO		(0x1 <<  6)
+/* Pro4 or older */
 #define SC_RSTCTRL_NRST_UMC1		(0x1 <<  5)
 #define SC_RSTCTRL_NRST_UMC0		(0x1 <<  4)
 #define SC_RSTCTRL_NRST_NAND		(0x1 <<  2)
@@ -53,6 +58,15 @@
 
 #define SC_RSTCTRL3			(SC_BASE_ADDR | 0x2008)
 
+/* Pro5 or newer */
+#define SC_RSTCTRL4			(SC_BASE_ADDR | 0x200c)
+#define SC_RSTCTRL4_NRST_UMCSB		(0x1 << 12)	/* UMC system bus */
+#define SC_RSTCTRL4_NRST_UMCA2		(0x1 << 10)	/* UMC ch2 standby */
+#define SC_RSTCTRL4_NRST_UMCA1		(0x1 <<  9)	/* UMC ch1 standby */
+#define SC_RSTCTRL4_NRST_UMCA0		(0x1 <<  8)	/* UMC ch0 standby */
+#define SC_RSTCTRL4_NRST_UMC31		(0x1 <<  5)	/* UMC ch1 */
+#define SC_RSTCTRL4_NRST_UMC30		(0x1 <<  4)	/* UMC ch0 */
+
 #define SC_CLKCTRL			(SC_BASE_ADDR | 0x2104)
 #define SC_CLKCTRL_CEN_USB31		(0x1 << 17)	/* USB3 #1 */
 #define SC_CLKCTRL_CEN_USB30		(0x1 << 16)	/* USB3 #0 */
@@ -60,11 +74,18 @@
 #define SC_CLKCTRL_CEN_MIO		(0x1 << 11)
 #define SC_CLKCTRL_CEN_STDMAC		(0x1 << 10)
 #define SC_CLKCTRL_CEN_GIO		(0x1 <<  6)
+/* Pro4 or older */
 #define SC_CLKCTRL_CEN_UMC		(0x1 <<  4)
 #define SC_CLKCTRL_CEN_NAND		(0x1 <<  2)
 #define SC_CLKCTRL_CEN_SBC		(0x1 <<  1)
 #define SC_CLKCTRL_CEN_PERI		(0x1 <<  0)
 
+/* Pro5 or newer */
+#define SC_CLKCTRL4			(SC_BASE_ADDR | 0x210c)
+#define SC_CLKCTRL4_CEN_UMCSB		(0x1 << 12)	/* UMC system bus */
+#define SC_CLKCTRL4_CEN_UMC1		(0x1 <<  1)	/* UMC ch1 */
+#define SC_CLKCTRL4_CEN_UMC0		(0x1 <<  0)	/* UMC ch0 */
+
 /* System reset control register */
 #define SC_IRQTIMSET			(SC_BASE_ADDR | 0x3000)
 #define SC_SLFRSTSEL			(SC_BASE_ADDR | 0x3010)
diff --git a/arch/arm/mach-uniphier/include/mach/sg-regs.h b/arch/arm/mach-uniphier/include/mach/sg-regs.h
index d8239f2..168b35e 100644
--- a/arch/arm/mach-uniphier/include/mach/sg-regs.h
+++ b/arch/arm/mach-uniphier/include/mach/sg-regs.h
@@ -59,7 +59,7 @@
 /* Pin Control */
 #define SG_PINCTRL_BASE			(SG_CTRL_BASE | 0x1000)
 
-/* Only for PH1-Pro4 */
+/* PH1-Pro4, PH1-Pro5 */
 #define SG_LOADPINCTRL			(SG_CTRL_BASE | 0x1700)
 
 /* Input Enable */