Merge branch 'master' of git://git.denx.de/u-boot-arm

* 'master' of git://git.denx.de/u-boot-arm: (145 commits)
  beagleboard: enable HUB power on all variants of the BeagleBoard
  dm3730: enable dpll5
  ehci-hcd: Allow cleanups to happen gracefully on a timeout.
  OMAP3: Add DSS driver for OMAP3
  led: Remove state-saving of led for toggle functionality and add toggle option to led command
  led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all'
  led: correct off/on locations in structure
  led: added cmd_led to Makefile
  BeagleBoard: fix LED 0/1 in driver
  Corrected LED name match finding avoiding extraneous Usage printouts
  BeagleBoard: config: updated default configuration
  BeagleBoard: config: Enabled multibus support for I2C in configuration
  BeagleBoard: config: add optargs/buddy/camera
  BeagleBoard: config: increase command-line functionality
  BeagleBoard: config: make mtest run
  BeagleBoard: config: enable DSS
  BeagleBoard: config: enable asix driver and dhcp
  BeagleBoard: config: enable networking
  BeagleBoard: config: decrease bootdelay to 2 seconds
  BeagleBoard: config: use uImage.beagle for tftp
  BeagleBoard: config: hardcode MAC for onboard SMSC
  BeagleBoard: config: load kernel from MMC ext, not FAT
  BeagleBoard: Configure DVI/S-video
  BeagleBoard: Added userbutton command
  BeagleBoard: turn off clocks in ehci_stop
  USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
  beagleboard: add support for xM revision C
  beagle: pass expansionboard name in bootargs
  OMAP: Remove omapfb.debug=y from Beagle and Overo env settings
  OMAP3 Beagle Pin Mux initialization glitch fix
  da850: modifications for Logic PD Rev.3 AM18xx EVM
  da850: fix the channel number for EMAC teardown init
  da850: add support for Spectrum Digital AM18xx EVM
  da850: add support to wake up DSP during board init
  da850: modify the U-Boot prompt string
  da850: add NOR boot mode support
  da8xx: add support for multiple PLL controllers
  da850: indicate cache usage disable in config file
  dm365: modify boot prompt from dm365 to dm36x
  dm365: disable cache usage due to coherency issues
  dm6446: disable cache usage due to coherency issues
  OMAP3: Remove legacy mmc driver
  devkit8000: Use generic MMC driver
  TI OMAP3 SDP3430: Use generic MMC driver
  AM3517 CraneBoard: Use generic MMC driver
  OMAP3: pandora: Use generic MMC driver
  OMAP3: Zoom2: Use generic MMC driver
  OMAP3: Zoom1: Use generic MMC driver
  OMAP3: DIG297: Use generic MMC driver
  OMAP3: CM-T35: Use generic MMC driver
  am3517evm: Use generic MMC driver
  omap3evm: Use generic MMC driver
  omap3:clock: check cpu_family before enabling clks for IVA & CAM
  omap3:clock: configure GFX clock to 200MHz for AM/DM37x
  OMAP3/4: Increase console I/O buffer size
  PXA: vpac270: Remove re-defined CONFIG_SYS_TEXT_BASE
  PXA: Fix CSB226, fix monitor length
  PXA: Fix Lubbock, remove redundant parenthesis
  armv7: cache: remove flush on un-aligned invalidate
  armv7: stronger barrier for cache-maintenance operations
  omap: enable caches at system start-up
  arm: do not force d-cache enable on all boards
  ORIGEN: Add MMC SPL support
  ARMV7: Add support for Samsung ORIGEN board
  i2c:gpio:s5p: Enable I2C GPIO on the GONI target
  i2c:gpio:s5p: I2C GPIO Software implementation (via soft_i2c)
  Tegra2: Use clock and pinmux functions to simplify code
  Tegra2: Add additional pin multiplexing features
  Tegra2: Add more clock support
  Tegra2: Add microsecond timer function
  ARM: remove broken "at91rm9200dk" board
  ARM: remove broken "m501sk" board
  ARM: remove broken "kb9202" board
  ARM: remove broken "csb637" board
  ARM: remove broken "cmc_pu2" board
  ARM: remove broken "at91cap9adk" board
  ARM: remove broken "voiceblue" board
  ARM: remove broken "smdk2400" board
  ARM: remove broken "sbc2410x" board
  ARM: remove broken "netstar" board
  ARM: remove broken "mx1fs2" board
  ARM: remove broken "lpd7a40x" boards
  ARM: remove broken "edb93xx" boards
  ARM: remove broken "B2" board
  ARM: remove broken "armadillo" board
  ARM: remove broken "assabet" board
  ARM: versatile: drop warnings
  IMX: scb9328: drop warnings
  MX31: imx31_litekit: make use of GPIO framework
  MX31: mx31ads: make use of GPIO framework
  MX5: mx51evk: make use of GPIO framework
  MX35: mx35pdk: make use of GPIO framework
  MX5: mx53loco: make use of GPIO framework
  MX5: mx53evk: make use of GPIO framework
  MX5: vision2: make use of GPIO framework
  MX5: mx53smd: make use of GPIO framework
  MX5: mx53ard: make use of GPIO framework
  MX25: zmx25: make use of GPIO framework
  MX5: efikamx: make use of GPIO framework
  MX31: QONG: make use of GPIO framework
  MX35: make use of GPIO framework for MX35 processor
  MX5: make use of GPIO framework for MX5 processor
  MX31: make use of GPIO framework for MX31 processor
  MX25: make use of GPIO framework for MX25 processor
  IMX: uniform GPIO interface using GPIO framework
  MX: MX35 / MX5: uniform clock command with powerpc
  MX35: MX35PDK: support additional RAM on CSD1
  mx53: ddr3: Update DD3 initialization
  ARM: MX51: PLL errata workaround
  ARM: versatilepb : drop warnings due to double definitions
  omap4: increase SRAM budget to fix build error
  omap4: fix build warning due to signed unsigned comparison
  mkimage: Fix 'Unknown OMAP image type - 5'
  omap: fix gpio related build breaks
  gpio:samsung: s5p_ suffix add for GPIO functions (C210_universal)
  SMDKV310: MMC SPL: Remove unwanted dummy functions
  SMDKV310: Fix undefined reference error
  SMDKV310: Fix build error for smdkv310 board
  gpio:samsung s5p_ suffix add for GPIO functions
  mmc: S5P: Support DMA restarts at buffer boundaries
  SMDKV310: Fix host compilation of mkv310_image
  arm: fix bd pointer dereference prior initialization
  arm, lib/board.c: use gd->ram_size instead of bd->bi_memsize
  mx5: Remove CONFIG_L2_OFF and CONFIG_SYS_L2CACHE_OFF
  MX31: removed warnings due to clock.h
  integrator: convert to new build system
  integratorcp: make the board compile
  integratorap: remove hardcoded 32MB memory cmdline
  ...

1 files changed, 0 insertions, 84 deletions

diff --git a/Makefile b/Makefile
index 03d80b7..699a752 100644
--- a/Makefile
+++ b/Makefile
@@ -798,78 +798,6 @@ M5485HFE_config :	unconfig
 # ARM
 #========================================================================
 
-#########################################################################
-## ARM926EJ-S Systems
-#########################################################################
-
-at91sam9m10g45ek_nandflash_config \
-at91sam9m10g45ek_dataflash_config \
-at91sam9m10g45ek_dataflash_cs0_config \
-at91sam9m10g45ek_config \
-at91sam9g45ekes_nandflash_config \
-at91sam9g45ekes_dataflash_config \
-at91sam9g45ekes_dataflash_cs0_config \
-at91sam9g45ekes_config	:	unconfig
-	@mkdir -p $(obj)include
-		@if [ "$(findstring 9m10,$@)" ] ; then \
-		echo "#define CONFIG_AT91SAM9M10G45EK 1"	>>$(obj)include/config.h ; \
-	else \
-		echo "#define CONFIG_AT91SAM9G45EKES 1"	>>$(obj)include/config.h ; \
-	fi;
-	@if [ "$(findstring _nandflash,$@)" ] ; then \
-		echo "#define CONFIG_SYS_USE_NANDFLASH 1"	>>$(obj)include/config.h ; \
-	else \
-		echo "#define CONFIG_ATMEL_SPI 1"	>>$(obj)include/config.h ; \
-	fi;
-	@$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91
-
-pm9g45_config	:	unconfig
-	@mkdir -p $(obj)include
-	@$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91
-
-SBC35_A9G20_NANDFLASH_config \
-SBC35_A9G20_EEPROM_config \
-SBC35_A9G20_config	:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91
-
-TNY_A9G20_NANDFLASH_config \
-TNY_A9G20_EEPROM_config \
-TNY_A9G20_config \
-TNY_A9260_NANDFLASH_config \
-TNY_A9260_EEPROM_config \
-TNY_A9260_config	:	unconfig
-	@mkdir -p $(obj)include
-	@echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h
-	@$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91
-
-########################################################################
-## ARM Integrator boards - see doc/README-integrator for more info.
-integratorap_config	\
-ap_config		\
-ap966_config		\
-ap922_config		\
-ap922_XA10_config	\
-ap7_config		\
-ap720t_config		\
-ap920t_config		\
-ap926ejs_config		\
-ap946es_config: unconfig
-	@board/armltd/integrator/split_by_variant.sh ap $@
-
-integratorcp_config	\
-cp_config		\
-cp920t_config		\
-cp926ejs_config		\
-cp946es_config		\
-cp1136_config		\
-cp966_config		\
-cp922_config		\
-cp922_XA10_config	\
-cp1026_config: unconfig
-	@board/armltd/integrator/split_by_variant.sh cp $@
-
 xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1))))
 
 omap1610inn_config \
@@ -923,16 +851,6 @@ tx25_config	: unconfig
 	@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 	@$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25
 
-edb9301_config \
-edb9302_config \
-edb9302a_config \
-edb9307_config \
-edb9307a_config \
-edb9312_config \
-edb9315_config \
-edb9315a_config: unconfig
-	@$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx
-
 #########################################################################
 ## XScale Systems
 #########################################################################
@@ -1014,9 +932,7 @@ clean:
 	       $(obj)tools/ncb		   $(obj)tools/ubsha1
 	@rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image}	  \
 	       $(obj)board/matrix_vision/*/bootscript.img		  \
-	       $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin}	  \
 	       $(obj)board/voiceblue/eeprom 				  \
-	       $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds  \
 	       $(obj)u-boot.lds						  \
 	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]	  \
 	       $(obj)arch/blackfin/cpu/init.{lds,elf}