summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2010-05-04 22:49:15 +0200
committerWolfgang Denk <wd@denx.de>2010-05-04 22:49:15 +0200
commit900a1fe8c8c7acda1d8903af02c2d0d993b770d8 (patch)
treeb17bb283aa7fe7b31f46fbdfd3496b7f23736840
parent4185ae7a7146a77a792e5ba49845e5ca6e95b038 (diff)
parent20d98c2cea3398ad93beccd4727a371f41514086 (diff)
downloadu-boot-imx-900a1fe8c8c7acda1d8903af02c2d0d993b770d8.zip
u-boot-imx-900a1fe8c8c7acda1d8903af02c2d0d993b770d8.tar.gz
u-boot-imx-900a1fe8c8c7acda1d8903af02c2d0d993b770d8.tar.bz2
Merge branch 'master' of git://git.denx.de/u-boot-arm
-rw-r--r--MAINTAINERS8
-rwxr-xr-xMAKEALL2
-rw-r--r--Makefile4
-rw-r--r--arch/arm/cpu/arm926ejs/mx25/generic.c2
-rw-r--r--arch/arm/cpu/arm926ejs/mx27/generic.c17
-rw-r--r--arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S5
-rw-r--r--arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile1
-rw-r--r--arch/arm/include/asm/arch-at91/at91_matrix.h138
-rw-r--r--arch/arm/include/asm/arch-at91/at91sam9260.h2
-rw-r--r--arch/arm/include/asm/arch-at91/at91sam9261.h2
-rw-r--r--arch/arm/include/asm/arch-at91/at91sam9263.h3
-rw-r--r--arch/arm/include/asm/arch-mx27/imx-regs.h1
-rw-r--r--arch/arm/include/asm/arch-mx31/mx31-regs.h15
-rw-r--r--arch/arm/include/asm/arch-mx31/mx31.h5
-rw-r--r--arch/arm/include/asm/arch-s5pc1xx/gpio.h192
-rw-r--r--arch/arm/include/asm/arch-s5pc1xx/uart.h2
-rw-r--r--arch/arm/include/asm/mach-types.h986
-rw-r--r--board/Marvell/guruplug/Makefile51
-rw-r--r--board/Marvell/guruplug/config.mk27
-rw-r--r--board/Marvell/guruplug/guruplug.c167
-rw-r--r--board/Marvell/guruplug/guruplug.h39
-rw-r--r--board/Marvell/guruplug/kwbimage.cfg162
-rw-r--r--board/davedenx/qong/lowlevel_init.S130
-rw-r--r--board/davedenx/qong/qong.c95
-rw-r--r--board/davedenx/qong/qong_fpga.h4
-rw-r--r--board/freescale/mx51evk/imximage.cfg2
-rw-r--r--board/freescale/mx51evk/mx51evk.c67
-rw-r--r--board/freescale/mx51evk/mx51evk.h1
-rw-r--r--board/logicpd/imx27lite/imx27lite.c18
-rw-r--r--board/ronetix/pm9261/led.c18
-rw-r--r--board/ronetix/pm9261/pm9261.c152
-rw-r--r--board/ronetix/pm9263/led.c15
-rw-r--r--board/ronetix/pm9263/pm9263.c195
-rw-r--r--common/serial.c16
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/mx31_gpio.c15
-rw-r--r--drivers/gpio/s5p_gpio.c (renamed from arch/arm/cpu/arm_cortexa8/s5pc1xx/gpio.c)16
-rw-r--r--drivers/serial/Makefile2
-rw-r--r--drivers/serial/serial_s5p.c (renamed from drivers/serial/serial_s5pc1xx.c)30
-rw-r--r--include/configs/guruplug.h198
-rw-r--r--include/configs/imx27lite-common.h237
-rw-r--r--include/configs/imx27lite.h200
-rw-r--r--include/configs/magnesium.h71
-rw-r--r--include/configs/mx51evk.h3
-rw-r--r--include/configs/openrd_base.h4
-rw-r--r--include/configs/pm9261.h69
-rw-r--r--include/configs/pm9263.h88
-rw-r--r--include/configs/qong.h40
-rw-r--r--include/configs/sheevaplug.h27
-rw-r--r--include/serial.h8
-rw-r--r--tools/imximage.c2
51 files changed, 2817 insertions, 738 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 00e06b7..5cbc845 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -194,6 +194,10 @@ Niklaus Giger <niklaus.giger@netstal.com>
MCU25 PPC405GPr
HCU5 PPC440EPx
+Siddarth Gore <gores@marvell.com>
+
+ guruplug ARM926EJS (Kirkwood SoC)
+
Frank Gottschling <fgottschling@eltec.de>
MHPC MPC8xx
@@ -739,6 +743,10 @@ Jens Scharsig <esw@bus-elektronik.de>
eb_cpux9k2 ARM920T (AT91RM9200 SoC)
+Heiko Schocher <hs@denx.de>
+
+ magnesium i.MX27
+
Robert Schwebel <r.schwebel@pengutronix.de>
csb226 xscale
diff --git a/MAKEALL b/MAKEALL
index 71ae618..bb09627 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -569,8 +569,10 @@ LIST_ARM9=" \
edb9312 \
edb9315 \
edb9315a \
+ guruplug \
imx27lite \
lpd7a400 \
+ magnesium \
mv88f6281gtw_ge \
mx1ads \
mx1fs2 \
diff --git a/Makefile b/Makefile
index 5fcbbb2..2d96574 100644
--- a/Makefile
+++ b/Makefile
@@ -2943,6 +2943,10 @@ davinci_dm365evm_config : unconfig
davinci_dm6467evm_config : unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs dm6467evm davinci davinci
+guruplug_config: unconfig
+ @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood
+
+magnesium_config \
imx27lite_config: unconfig
@$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27
diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c
index 694841d..b80a389 100644
--- a/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -111,7 +111,7 @@ int print_cpuinfo (void)
char buf[32];
printf ("CPU: Freescale i.MX25 at %s MHz\n\n",
- strmhz (buf, imx_get_mpllclk ()));
+ strmhz (buf, imx_get_armclk ()));
return 0;
}
#endif
diff --git a/arch/arm/cpu/arm926ejs/mx27/generic.c b/arch/arm/cpu/arm926ejs/mx27/generic.c
index 30cf544..ae2ce58 100644
--- a/arch/arm/cpu/arm926ejs/mx27/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx27/generic.c
@@ -316,6 +316,23 @@ void mx27_fec_init_pins(void)
#endif /* CONFIG_FEC_MXC */
#ifdef CONFIG_MXC_MMC
+void mx27_sd1_init_pins(void)
+{
+ int i;
+ unsigned int mode[] = {
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ };
+
+ for (i = 0; i < ARRAY_SIZE(mode); i++)
+ imx_gpio_mode(mode[i]);
+
+}
+
void mx27_sd2_init_pins(void)
{
int i;
diff --git a/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S b/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S
index 31af9e2..783c81f 100644
--- a/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S
+++ b/arch/arm/cpu/arm_cortexa8/mx51/lowlevel_init.S
@@ -158,6 +158,7 @@
/* Switch peripheral to PLL 3 */
ldr r0, =CCM_BASE_ADDR
ldr r1, =0x000010C0
+ orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
str r1, [r0, #CLKCTL_CBCMR]
ldr r1, =0x13239145
str r1, [r0, #CLKCTL_CBCDR]
@@ -171,6 +172,7 @@
ldr r1, =0x19239145
str r1, [r0, #CLKCTL_CBCDR]
ldr r1, =0x000020C0
+ orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
str r1, [r0, #CLKCTL_CBCMR]
mov r3, #DP_OP_216
@@ -201,9 +203,10 @@
/* setup the rest */
/* Use lp_apm (24MHz) source for perclk */
ldr r1, =0x000020C2
+ orr r1,r1,#CONFIG_SYS_DDR_CLKSEL
str r1, [r0, #CLKCTL_CBCMR]
/* ddr clock from PLL 1, all perclk dividers are 1 since using 24MHz */
- ldr r1, =0x59E35100
+ ldr r1, =CONFIG_SYS_CLKTL_CBCDR
str r1, [r0, #CLKCTL_CBCDR]
/* Restore the default values in the Gate registers */
diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile b/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile
index 01c93fe..3785593 100644
--- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile
+++ b/arch/arm/cpu/arm_cortexa8/s5pc1xx/Makefile
@@ -33,7 +33,6 @@ SOBJS += reset.o
COBJS += clock.o
COBJS += cpu_info.o
-COBJS += gpio.o
COBJS += sromc.o
COBJS += timer.o
diff --git a/arch/arm/include/asm/arch-at91/at91_matrix.h b/arch/arm/include/asm/arch-at91/at91_matrix.h
index 981ec20..f99b1d4 100644
--- a/arch/arm/include/asm/arch-at91/at91_matrix.h
+++ b/arch/arm/include/asm/arch-at91/at91_matrix.h
@@ -113,4 +113,142 @@ typedef struct at91_matrix {
#define AT91_MATRIX_CSA_EBI1_CS2A 0x00000008
+#if defined CONFIG_AT91SAM9261
+/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_MCFG_RCB0 (1 << 0)
+/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_MCFG_RCB1 (1 << 1)
+#endif
+
+/* Undefined Length Burst Type */
+#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9263) || \
+ defined(CONFIG_AT91SAM9G45)
+#define AT91_MATRIX_MCFG_ULBT_INFINITE 0x00000000
+#define AT91_MATRIX_MCFG_ULBT_SINGLE 0x00000001
+#define AT91_MATRIX_MCFG_ULBT_FOUR 0x00000002
+#define AT91_MATRIX_MCFG_ULBT_EIGHT 0x00000003
+#define AT91_MATRIX_MCFG_ULBT_SIXTEEN 0x00000004
+#endif
+#if defined(CONFIG_AT91SAM9G45)
+#define AT91_MATRIX_MCFG_ULBT_THIRTYTWO 0x00000005
+#define AT91_MATRIX_MCFG_ULBT_SIXTYFOUR 0x00000006
+#define AT91_MATRIX_MCFG_ULBT_128 0x00000007
+#endif
+
+/* Default Master Type */
+#define AT91_MATRIX_SCFG_DEFMSTR_TYPE_NONE 0x00000000
+#define AT91_MATRIX_SCFG_DEFMSTR_TYPE_LAST 0x00010000
+#define AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED 0x00020000
+
+/* Fixed Index of Default Master */
+#if defined(CONFIG_AT91SAM9G45) || defined(CONFIG_AT91SAM9263)
+#define AT91_MATRIX_SCFG_FIXED_DEFMSTR(x) ((x & 0xf) << 18)
+#elif defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9260)
+#define AT91_MATRIX_SCFG_FIXED_DEFMSTR(x) ((x & 7) << 18)
+#endif
+
+/* Maximum Number of Allowed Cycles for a Burst */
+#if defined(CONFIG_AT91SAM9G45)
+#define AT91_MATRIX_SCFG_SLOT_CYCLE(x) ((x & 0x1ff) << 0)
+#elif defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9261) || \
+ defined(CONFIG_AT91SAM9263)
+#define AT91_MATRIX_SCFG_SLOT_CYCLE(x) ((x & 0xff) << 0)
+#endif
+
+/* Arbitration Type */
+#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9263)
+#define AT91_MATRIX_SCFG_ARBT_ROUND_ROBIN 0x00000000
+#define AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY 0x01000000
+#endif
+
+/* Master Remap Control Register */
+#if defined(CONFIG_AT91SAM9260) || defined(CONFIG_AT91SAM9263) || \
+ defined(CONFIG_AT91SAM9G45)
+/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define AT91_MATRIX_MRCR_RCB0 (1 << 0)
+/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define AT91_MATRIX_MRCR_RCB1 (1 << 1)
+#endif
+#if defined(CONFIG_AT91SAM9263) || defined(CONFIG_AT91SAM9G45)
+#define AT91_MATRIX_MRCR_RCB2 0x00000004
+#define AT91_MATRIX_MRCR_RCB3 0x00000008
+#define AT91_MATRIX_MRCR_RCB4 0x00000010
+#define AT91_MATRIX_MRCR_RCB5 0x00000020
+#define AT91_MATRIX_MRCR_RCB6 0x00000040
+#define AT91_MATRIX_MRCR_RCB7 0x00000080
+#define AT91_MATRIX_MRCR_RCB8 0x00000100
+#endif
+#if defined(CONFIG_AT91SAM9G45)
+#define AT91_MATRIX_MRCR_RCB9 0x00000200
+#define AT91_MATRIX_MRCR_RCB10 0x00000400
+#define AT91_MATRIX_MRCR_RCB11 0x00000800
+#endif
+
+/* TCM Configuration Register */
+#if defined(CONFIG_AT91SAM9G45)
+/* Size of ITCM enabled memory block */
+#define AT91_MATRIX_TCMR_ITCM_0 0x00000000
+#define AT91_MATRIX_TCMR_ITCM_32 0x00000040
+/* Size of DTCM enabled memory block */
+#define AT91_MATRIX_TCMR_DTCM_0 0x00000000
+#define AT91_MATRIX_TCMR_DTCM_32 0x00000060
+#define AT91_MATRIX_TCMR_DTCM_64 0x00000070
+/* Wait state TCM register */
+#define AT91_MATRIX_TCMR_TCM_NO_WS 0x00000000
+#define AT91_MATRIX_TCMR_TCM_ONE_WS 0x00000800
+#endif
+#if defined(CONFIG_AT91SAM9263)
+/* Size of ITCM enabled memory block */
+#define AT91_MATRIX_TCMR_ITCM_0 0x00000000
+#define AT91_MATRIX_TCMR_ITCM_16 0x00000005
+#define AT91_MATRIX_TCMR_ITCM_32 0x00000006
+/* Size of DTCM enabled memory block */
+#define AT91_MATRIX_TCMR_DTCM_0 0x00000000
+#define AT91_MATRIX_TCMR_DTCM_16 0x00000050
+#define AT91_MATRIX_TCMR_DTCM_32 0x00000060
+#endif
+#if defined(CONFIG_AT91SAM9261)
+/* Size of ITCM enabled memory block */
+#define AT91_MATRIX_TCMR_ITCM_0 0x00000000
+#define AT91_MATRIX_TCMR_ITCM_16 0x00000005
+#define AT91_MATRIX_TCMR_ITCM_32 0x00000006
+#define AT91_MATRIX_TCMR_ITCM_64 0x00000007
+/* Size of DTCM enabled memory block */
+#define AT91_MATRIX_TCMR_DTCM_0 0x00000000
+#define AT91_MATRIX_TCMR_DTCM_16 0x00000050
+#define AT91_MATRIX_TCMR_DTCM_32 0x00000060
+#define AT91_MATRIX_TCMR_DTCM_64 0x00000070
+#endif
+
+#if defined(CONFIG_AT91SAM9G45)
+/* Video Mode Configuration Register */
+#define AT91C_MATRIX_VDEC_SEL_OFF 0x00000000
+#define AT91C_MATRIX_VDEC_SEL_ON 0x00000001
+/* Write Protect Mode Register */
+#define AT91_MATRIX_WPMR_WP_WPDIS 0x00000000
+#define AT91_MATRIX_WPMR_WP_WPEN 0x00000001
+#define AT91_MATRIX_WPMR_WPKEY 0xFFFFFF00 /* Write Protect KEY */
+/* Write Protect Status Register */
+#define AT91_MATRIX_WPSR_NO_WPV 0x00000000
+#define AT91_MATRIX_WPSR_WPV 0x00000001
+#define AT91_MATRIX_WPSR_WPVSRC 0x00FFFF00 /* Write Protect Violation Source */
+#endif
+
+/* USB Pad Pull-Up Control Register */
+#if defined(CONFIG_AT91SAM9261)
+#define AT91_MATRIX_USBPUCR_PUON 0x40000000
+#endif
+
+#define AT91_MATRIX_PRA_M0(x) ((x & 3) << 0) /* Master 0 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M1(x) ((x & 3) << 4) /* Master 1 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M2(x) ((x & 3) << 8) /* Master 2 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M3(x) ((x & 3) << 12) /* Master 3 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M4(x) ((x & 3) << 16) /* Master 4 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M5(x) ((x & 3) << 20) /* Master 5 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M6(x) ((x & 3) << 24) /* Master 6 Priority Reg. A*/
+#define AT91_MATRIX_PRA_M7(x) ((x & 3) << 28) /* Master 7 Priority Reg. A*/
+#define AT91_MATRIX_PRB_M8(x) ((x & 3) << 0) /* Master 8 Priority Reg. B) */
+#define AT91_MATRIX_PRB_M9(x) ((x & 3) << 4) /* Master 9 Priority Reg. B) */
+#define AT91_MATRIX_PRB_M10(x) ((x & 3) << 8) /* Master 10 Priority Reg. B) */
+
#endif
diff --git a/arch/arm/include/asm/arch-at91/at91sam9260.h b/arch/arm/include/asm/arch-at91/at91sam9260.h
index a60a081..ec04318 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9260.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9260.h
@@ -56,8 +56,10 @@
#define AT91_PIO_BASE 0xfffff400
#define AT91_PMC_BASE 0xfffffc00
#define AT91_RSTC_BASE 0xfffffd00
+#define AT91_RTT_BASE 0xfffffd20
#define AT91_PIT_BASE 0xfffffd30
#define AT91_WDT_BASE 0xfffffd40
+#define AT91_GPR_BASE 0xfffffd50
#ifdef CONFIG_AT91_LEGACY
diff --git a/arch/arm/include/asm/arch-at91/at91sam9261.h b/arch/arm/include/asm/arch-at91/at91sam9261.h
index 2952292..7ca0283 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9261.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9261.h
@@ -49,8 +49,10 @@
#define AT91_PIO_BASE 0xfffff400
#define AT91_PMC_BASE 0xfffffc00
#define AT91_RSTC_BASE 0xfffffd00
+#define AT91_RTT_BASE 0xfffffd20
#define AT91_PIT_BASE 0xfffffd30
#define AT91_WDT_BASE 0xfffffd40
+#define AT91_GPBR_BASE 0xfffffd50
#ifdef CONFIG_AT91_LEGACY
diff --git a/arch/arm/include/asm/arch-at91/at91sam9263.h b/arch/arm/include/asm/arch-at91/at91sam9263.h
index c177bd0..4ada1ce 100644
--- a/arch/arm/include/asm/arch-at91/at91sam9263.h
+++ b/arch/arm/include/asm/arch-at91/at91sam9263.h
@@ -61,8 +61,11 @@
#define AT91_PIO_BASE 0xfffff200
#define AT91_PMC_BASE 0xfffffc00
#define AT91_RSTC_BASE 0xfffffd00
+#define AT91_RTT0_BASE 0xfffffd20
#define AT91_PIT_BASE 0xfffffd30
#define AT91_WDT_BASE 0xfffffd40
+#define AT91_RTT1_BASE 0xfffffd50
+#define AT91_GPBR_BASE 0xfffffd60
#ifdef CONFIG_AT91_LEGACY
diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h
index d36a6da..6ecddaa 100644
--- a/arch/arm/include/asm/arch-mx27/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -37,6 +37,7 @@ extern void mx27_fec_init_pins(void);
#endif /* CONFIG_FEC_MXC */
#ifdef CONFIG_MXC_MMC
+extern void mx27_sd1_init_pins(void);
extern void mx27_sd2_init_pins(void);
#endif /* CONFIG_MXC_MMC */
diff --git a/arch/arm/include/asm/arch-mx31/mx31-regs.h b/arch/arm/include/asm/arch-mx31/mx31-regs.h
index 6f6e9a4..d72585c 100644
--- a/arch/arm/include/asm/arch-mx31/mx31-regs.h
+++ b/arch/arm/include/asm/arch-mx31/mx31-regs.h
@@ -207,6 +207,15 @@ struct clock_control_regs {
#define MUX_CTL_CSPI1_SS0 0x8e
#define MUX_CTL_CSPI1_SS1 0x8f
+#define MUX_CTL_NFC_WP 0xD0
+#define MUX_CTL_NFC_CE 0xD1
+#define MUX_CTL_NFC_RB 0xD2
+#define MUX_CTL_NFC_WE 0xD4
+#define MUX_CTL_NFC_RE 0xD5
+#define MUX_CTL_NFC_ALE 0xD6
+#define MUX_CTL_NFC_CLE 0xD7
+
+
/*
* Helper macros for the MUX_[contact name]__[pin function] macros
*/
@@ -294,4 +303,10 @@ struct clock_control_regs {
*/
#define NFC_BASE_ADDR 0xB8000000
+/*
+ * Internal RAM (16KB)
+ */
+#define IRAM_BASE_ADDR 0x1FFFC000
+#define IRAM_SIZE (16 * 1024)
+
#endif /* __ASM_ARCH_MX31_REGS_H */
diff --git a/arch/arm/include/asm/arch-mx31/mx31.h b/arch/arm/include/asm/arch-mx31/mx31.h
index 3cc4b35..f702d26 100644
--- a/arch/arm/include/asm/arch-mx31/mx31.h
+++ b/arch/arm/include/asm/arch-mx31/mx31.h
@@ -37,12 +37,17 @@ enum mx31_gpio_direction {
extern int mx31_gpio_direction(unsigned int gpio,
enum mx31_gpio_direction direction);
extern void mx31_gpio_set(unsigned int gpio, unsigned int value);
+extern int mx31_gpio_get(unsigned int gpio);
#else
static inline int mx31_gpio_direction(unsigned int gpio,
enum mx31_gpio_direction direction)
{
return 1;
}
+static inline int mx31_gpio_get(unsigned int gpio)
+{
+ return 1;
+}
static inline void mx31_gpio_set(unsigned int gpio, unsigned int value)
{
}
diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
index 8e4bb86..9a7faed 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
@@ -22,7 +22,7 @@
#define __ASM_ARCH_GPIO_H
#ifndef __ASSEMBLY__
-struct s5pc1xx_gpio_bank {
+struct s5p_gpio_bank {
unsigned int con;
unsigned int dat;
unsigned int pull;
@@ -33,107 +33,107 @@ struct s5pc1xx_gpio_bank {
};
struct s5pc100_gpio {
- struct s5pc1xx_gpio_bank gpio_a0;
- struct s5pc1xx_gpio_bank gpio_a1;
- struct s5pc1xx_gpio_bank gpio_b;
- struct s5pc1xx_gpio_bank gpio_c;
- struct s5pc1xx_gpio_bank gpio_d;
- struct s5pc1xx_gpio_bank gpio_e0;
- struct s5pc1xx_gpio_bank gpio_e1;
- struct s5pc1xx_gpio_bank gpio_f0;
- struct s5pc1xx_gpio_bank gpio_f1;
- struct s5pc1xx_gpio_bank gpio_f2;
- struct s5pc1xx_gpio_bank gpio_f3;
- struct s5pc1xx_gpio_bank gpio_g0;
- struct s5pc1xx_gpio_bank gpio_g1;
- struct s5pc1xx_gpio_bank gpio_g2;
- struct s5pc1xx_gpio_bank gpio_g3;
- struct s5pc1xx_gpio_bank gpio_i;
- struct s5pc1xx_gpio_bank gpio_j0;
- struct s5pc1xx_gpio_bank gpio_j1;
- struct s5pc1xx_gpio_bank gpio_j2;
- struct s5pc1xx_gpio_bank gpio_j3;
- struct s5pc1xx_gpio_bank gpio_j4;
- struct s5pc1xx_gpio_bank gpio_k0;
- struct s5pc1xx_gpio_bank gpio_k1;
- struct s5pc1xx_gpio_bank gpio_k2;
- struct s5pc1xx_gpio_bank gpio_k3;
- struct s5pc1xx_gpio_bank gpio_l0;
- struct s5pc1xx_gpio_bank gpio_l1;
- struct s5pc1xx_gpio_bank gpio_l2;
- struct s5pc1xx_gpio_bank gpio_l3;
- struct s5pc1xx_gpio_bank gpio_l4;
- struct s5pc1xx_gpio_bank gpio_h0;
- struct s5pc1xx_gpio_bank gpio_h1;
- struct s5pc1xx_gpio_bank gpio_h2;
- struct s5pc1xx_gpio_bank gpio_h3;
+ struct s5p_gpio_bank gpio_a0;
+ struct s5p_gpio_bank gpio_a1;
+ struct s5p_gpio_bank gpio_b;
+ struct s5p_gpio_bank gpio_c;
+ struct s5p_gpio_bank gpio_d;
+ struct s5p_gpio_bank gpio_e0;
+ struct s5p_gpio_bank gpio_e1;
+ struct s5p_gpio_bank gpio_f0;
+ struct s5p_gpio_bank gpio_f1;
+ struct s5p_gpio_bank gpio_f2;
+ struct s5p_gpio_bank gpio_f3;
+ struct s5p_gpio_bank gpio_g0;
+ struct s5p_gpio_bank gpio_g1;
+ struct s5p_gpio_bank gpio_g2;
+ struct s5p_gpio_bank gpio_g3;
+ struct s5p_gpio_bank gpio_i;
+ struct s5p_gpio_bank gpio_j0;
+ struct s5p_gpio_bank gpio_j1;
+ struct s5p_gpio_bank gpio_j2;
+ struct s5p_gpio_bank gpio_j3;
+ struct s5p_gpio_bank gpio_j4;
+ struct s5p_gpio_bank gpio_k0;
+ struct s5p_gpio_bank gpio_k1;
+ struct s5p_gpio_bank gpio_k2;
+ struct s5p_gpio_bank gpio_k3;
+ struct s5p_gpio_bank gpio_l0;
+ struct s5p_gpio_bank gpio_l1;
+ struct s5p_gpio_bank gpio_l2;
+ struct s5p_gpio_bank gpio_l3;
+ struct s5p_gpio_bank gpio_l4;
+ struct s5p_gpio_bank gpio_h0;
+ struct s5p_gpio_bank gpio_h1;
+ struct s5p_gpio_bank gpio_h2;
+ struct s5p_gpio_bank gpio_h3;
};
struct s5pc110_gpio {
- struct s5pc1xx_gpio_bank gpio_a0;
- struct s5pc1xx_gpio_bank gpio_a1;
- struct s5pc1xx_gpio_bank gpio_b;
- struct s5pc1xx_gpio_bank gpio_c0;
- struct s5pc1xx_gpio_bank gpio_c1;
- struct s5pc1xx_gpio_bank gpio_d0;
- struct s5pc1xx_gpio_bank gpio_d1;
- struct s5pc1xx_gpio_bank gpio_e0;
- struct s5pc1xx_gpio_bank gpio_e1;
- struct s5pc1xx_gpio_bank gpio_f0;
- struct s5pc1xx_gpio_bank gpio_f1;
- struct s5pc1xx_gpio_bank gpio_f2;
- struct s5pc1xx_gpio_bank gpio_f3;
- struct s5pc1xx_gpio_bank gpio_g0;
- struct s5pc1xx_gpio_bank gpio_g1;
- struct s5pc1xx_gpio_bank gpio_g2;
- struct s5pc1xx_gpio_bank gpio_g3;
- struct s5pc1xx_gpio_bank gpio_i;
- struct s5pc1xx_gpio_bank gpio_j0;
- struct s5pc1xx_gpio_bank gpio_j1;
- struct s5pc1xx_gpio_bank gpio_j2;
- struct s5pc1xx_gpio_bank gpio_j3;
- struct s5pc1xx_gpio_bank gpio_j4;
- struct s5pc1xx_gpio_bank gpio_mp0_1;
- struct s5pc1xx_gpio_bank gpio_mp0_2;
- struct s5pc1xx_gpio_bank gpio_mp0_3;
- struct s5pc1xx_gpio_bank gpio_mp0_4;
- struct s5pc1xx_gpio_bank gpio_mp0_5;
- struct s5pc1xx_gpio_bank gpio_mp0_6;
- struct s5pc1xx_gpio_bank gpio_mp0_7;
- struct s5pc1xx_gpio_bank gpio_mp1_0;
- struct s5pc1xx_gpio_bank gpio_mp1_1;
- struct s5pc1xx_gpio_bank gpio_mp1_2;
- struct s5pc1xx_gpio_bank gpio_mp1_3;
- struct s5pc1xx_gpio_bank gpio_mp1_4;
- struct s5pc1xx_gpio_bank gpio_mp1_5;
- struct s5pc1xx_gpio_bank gpio_mp1_6;
- struct s5pc1xx_gpio_bank gpio_mp1_7;
- struct s5pc1xx_gpio_bank gpio_mp1_8;
- struct s5pc1xx_gpio_bank gpio_mp2_0;
- struct s5pc1xx_gpio_bank gpio_mp2_1;
- struct s5pc1xx_gpio_bank gpio_mp2_2;
- struct s5pc1xx_gpio_bank gpio_mp2_3;
- struct s5pc1xx_gpio_bank gpio_mp2_4;
- struct s5pc1xx_gpio_bank gpio_mp2_5;
- struct s5pc1xx_gpio_bank gpio_mp2_6;
- struct s5pc1xx_gpio_bank gpio_mp2_7;
- struct s5pc1xx_gpio_bank gpio_mp2_8;
- struct s5pc1xx_gpio_bank res1[48];
- struct s5pc1xx_gpio_bank gpio_h0;
- struct s5pc1xx_gpio_bank gpio_h1;
- struct s5pc1xx_gpio_bank gpio_h2;
- struct s5pc1xx_gpio_bank gpio_h3;
+ struct s5p_gpio_bank gpio_a0;
+ struct s5p_gpio_bank gpio_a1;
+ struct s5p_gpio_bank gpio_b;
+ struct s5p_gpio_bank gpio_c0;
+ struct s5p_gpio_bank gpio_c1;
+ struct s5p_gpio_bank gpio_d0;
+ struct s5p_gpio_bank gpio_d1;
+ struct s5p_gpio_bank gpio_e0;
+ struct s5p_gpio_bank gpio_e1;
+ struct s5p_gpio_bank gpio_f0;
+ struct s5p_gpio_bank gpio_f1;
+ struct s5p_gpio_bank gpio_f2;
+ struct s5p_gpio_bank gpio_f3;
+ struct s5p_gpio_bank gpio_g0;
+ struct s5p_gpio_bank gpio_g1;
+ struct s5p_gpio_bank gpio_g2;
+ struct s5p_gpio_bank gpio_g3;
+ struct s5p_gpio_bank gpio_i;
+ struct s5p_gpio_bank gpio_j0;
+ struct s5p_gpio_bank gpio_j1;
+ struct s5p_gpio_bank gpio_j2;
+ struct s5p_gpio_bank gpio_j3;
+ struct s5p_gpio_bank gpio_j4;
+ struct s5p_gpio_bank gpio_mp0_1;
+ struct s5p_gpio_bank gpio_mp0_2;
+ struct s5p_gpio_bank gpio_mp0_3;
+ struct s5p_gpio_bank gpio_mp0_4;
+ struct s5p_gpio_bank gpio_mp0_5;
+ struct s5p_gpio_bank gpio_mp0_6;
+ struct s5p_gpio_bank gpio_mp0_7;
+ struct s5p_gpio_bank gpio_mp1_0;
+ struct s5p_gpio_bank gpio_mp1_1;
+ struct s5p_gpio_bank gpio_mp1_2;
+ struct s5p_gpio_bank gpio_mp1_3;
+ struct s5p_gpio_bank gpio_mp1_4;
+ struct s5p_gpio_bank gpio_mp1_5;
+ struct s5p_gpio_bank gpio_mp1_6;
+ struct s5p_gpio_bank gpio_mp1_7;
+ struct s5p_gpio_bank gpio_mp1_8;
+ struct s5p_gpio_bank gpio_mp2_0;
+ struct s5p_gpio_bank gpio_mp2_1;
+ struct s5p_gpio_bank gpio_mp2_2;
+ struct s5p_gpio_bank gpio_mp2_3;
+ struct s5p_gpio_bank gpio_mp2_4;
+ struct s5p_gpio_bank gpio_mp2_5;
+ struct s5p_gpio_bank gpio_mp2_6;
+ struct s5p_gpio_bank gpio_mp2_7;
+ struct s5p_gpio_bank gpio_mp2_8;
+ struct s5p_gpio_bank res1[48];
+ struct s5p_gpio_bank gpio_h0;
+ struct s5p_gpio_bank gpio_h1;
+ struct s5p_gpio_bank gpio_h2;
+ struct s5p_gpio_bank gpio_h3;
};
/* functions */
-void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg);
-void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en);
-void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio);
-void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en);
-unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio);
-void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode);
-void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode);
-void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode);
+void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg);
+void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en);
+void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio);
+void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en);
+unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio);
+void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode);
+void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode);
+void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode);
#endif
/* Pin configurations */
diff --git a/arch/arm/include/asm/arch-s5pc1xx/uart.h b/arch/arm/include/asm/arch-s5pc1xx/uart.h
index 140dbdc..2d7ad7e 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/uart.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/uart.h
@@ -24,7 +24,7 @@
#define __ASM_ARCH_UART_H_
#ifndef __ASSEMBLY__
-struct s5pc1xx_uart {
+struct s5p_uart {
unsigned int ulcon;
unsigned int ucon;
unsigned int ufcon;
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
index 4622557..b33e97b 100644
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -2659,7 +2659,7 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_AQUILA 2676
#define MACH_TYPE_SPARK_SLS_HW2 2677
#define MACH_TYPE_ESATA_SHEEVAPLUG 2678
-#define MACH_TYPE_SURF7X30 2679
+#define MACH_TYPE_MSM7X30_SURF 2679
#define MACH_TYPE_MICRO2440 2680
#define MACH_TYPE_AM2440 2681
#define MACH_TYPE_TQ2440 2682
@@ -2693,12 +2693,86 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_QSD8X50_FFA 2710
#define MACH_TYPE_QSD8X50A_SURF 2711
#define MACH_TYPE_QSD8X50A_FFA 2712
-#define MACH_TYPE_XGCP10 2713
+#define MACH_TYPE_ADX_XGCP10 2713
#define MACH_TYPE_MCGWUMTS2A 2714
#define MACH_TYPE_MOBIKT 2715
#define MACH_TYPE_MX53_EVK 2716
#define MACH_TYPE_IGEP0030 2717
#define MACH_TYPE_AXELL_H40_H50_CTRL 2718
+#define MACH_TYPE_DTCOMMOD 2719
+#define MACH_TYPE_GOULD 2720
+#define MACH_TYPE_SIBERIA 2721
+#define MACH_TYPE_SBC3530 2722
+#define MACH_TYPE_QARM 2723
+#define MACH_TYPE_MIPS 2724
+#define MACH_TYPE_MX27GRB 2725
+#define MACH_TYPE_SBC8100 2726
+#define MACH_TYPE_SAARB 2727
+#define MACH_TYPE_OMAP3MINI 2728
+#define MACH_TYPE_CNMBOOK7SE 2729
+#define MACH_TYPE_CATAN 2730
+#define MACH_TYPE_HARMONY 2731
+#define MACH_TYPE_TONGA 2732
+#define MACH_TYPE_CYBOOK_ORIZON 2733
+#define MACH_TYPE_HTCRHODIUMCDMA 2734
+#define MACH_TYPE_EPC_G45 2735
+#define MACH_TYPE_EPC_LPC3250 2736
+#define MACH_TYPE_MXC91341EVB 2737
+#define MACH_TYPE_RTW1000 2738
+#define MACH_TYPE_BOBCAT 2739
+#define MACH_TYPE_TRIZEPS6 2740
+#define MACH_TYPE_MSM7X30_FLUID 2741
+#define MACH_TYPE_NEDAP9263 2742
+#define MACH_TYPE_NETGEAR_MS2110 2743
+#define MACH_TYPE_BMX 2744
+#define MACH_TYPE_NETSTREAM 2745
+#define MACH_TYPE_VPNEXT_RCU 2746
+#define MACH_TYPE_VPNEXT_MPU 2747
+#define MACH_TYPE_BCMRING_TABLET_V1 2748
+#define MACH_TYPE_SGARM10 2749
+#define MACH_TYPE_CM_T3517 2750
+#define MACH_TYPE_OMAP3_CPS 2751
+#define MACH_TYPE_AXAR1500_RECEIVER 2752
+#define MACH_TYPE_WBD222 2753
+#define MACH_TYPE_MT65XX 2754
+#define MACH_TYPE_MSM8X60_SURF 2755
+#define MACH_TYPE_MSM8X60_SIM 2756
+#define MACH_TYPE_VMC300 2757
+#define MACH_TYPE_TCC8000_SDK 2758
+#define MACH_TYPE_NANOS 2759
+#define MACH_TYPE_STAMP9G10 2760
+#define MACH_TYPE_STAMP9G45 2761
+#define MACH_TYPE_H6053 2762
+#define MACH_TYPE_SMINT01 2763
+#define MACH_TYPE_PRTLVT2 2764
+#define MACH_TYPE_AP420 2765
+#define MACH_TYPE_HTCSHIFT 2766
+#define MACH_TYPE_DAVINCI_DM365_FC 2767
+#define MACH_TYPE_MSM8X55_SURF 2768
+#define MACH_TYPE_MSM8X55_FFA 2769
+#define MACH_TYPE_ESL_VAMANA 2770
+#define MACH_TYPE_SBC35 2771
+#define MACH_TYPE_MPX6446 2772
+#define MACH_TYPE_OREO_CONTROLLER 2773
+#define MACH_TYPE_KOPIN_MODELS 2774
+#define MACH_TYPE_TTC_VISION2 2775
+#define MACH_TYPE_CNS3420VB 2776
+#define MACH_TYPE_LPC2 2777
+#define MACH_TYPE_OLYMPUS 2778
+#define MACH_TYPE_VORTEX 2779
+#define MACH_TYPE_S5PC200 2780
+#define MACH_TYPE_ECUCORE_9263 2781
+#define MACH_TYPE_SMDKC200 2782
+#define MACH_TYPE_EMSISO_SX27 2783
+#define MACH_TYPE_APX_SOM9G45_EK 2784
+#define MACH_TYPE_SONGSHAN 2785
+#define MACH_TYPE_TIANSHAN 2786
+#define MACH_TYPE_VPX500 2787
+#define MACH_TYPE_AM3517SAM 2788
+#define MACH_TYPE_SKAT91_SIM508 2789
+#define MACH_TYPE_SKAT91_S3E 2790
+#define MACH_TYPE_OMAP4_PANDA 2791
+#define MACH_TYPE_DF7220 2792
#ifdef CONFIG_ARCH_EBSA110
# ifdef machine_arch_type
@@ -18343,9 +18417,9 @@ extern unsigned int __machine_arch_type;
# else
# define machine_arch_type MACH_TYPE_HYNET_INE
# endif
-# define machine_is_hynet_ine() (machine_arch_type == MACH_TYPE_HYNET_INE)
+# define machine_is_argonst_foundation() (machine_arch_type == MACH_TYPE_HYNET_INE)
#else
-# define machine_is_hynet_ine() (0)
+# define machine_is_argonst_foundation() (0)
#endif
#ifdef CONFIG_MACH_HYNET_APP
@@ -30211,9 +30285,9 @@ extern unsigned int __machine_arch_type;
# else
# define machine_arch_type MACH_TYPE_OREO
# endif
-# define machine_is_oreo() (machine_arch_type == MACH_TYPE_OREO)
+# define machine_is_oreo_camera() (machine_arch_type == MACH_TYPE_OREO)
#else
-# define machine_is_oreo() (0)
+# define machine_is_oreo_camera() (0)
#endif
#ifdef CONFIG_MACH_SMDK6442
@@ -34464,14 +34538,14 @@ extern unsigned int __machine_arch_type;
# define machine_is_sheeva_esata() (0)
#endif
-#ifdef CONFIG_MACH_SURF7X30
+#ifdef CONFIG_MACH_MSM7X30_SURF
# ifdef machine_arch_type
# undef machine_arch_type
# define machine_arch_type __machine_arch_type
# else
-# define machine_arch_type MACH_TYPE_SURF7X30
+# define machine_arch_type MACH_TYPE_MSM7X30_SURF
# endif
-# define machine_is_msm7x30_surf() (machine_arch_type == MACH_TYPE_SURF7X30)
+# define machine_is_msm7x30_surf() (machine_arch_type == MACH_TYPE_MSM7X30_SURF)
#else
# define machine_is_msm7x30_surf() (0)
#endif
@@ -34872,14 +34946,14 @@ extern unsigned int __machine_arch_type;
# define machine_is_qsd8x50a_ffa() (0)
#endif
-#ifdef CONFIG_MACH_XGCP10
+#ifdef CONFIG_MACH_ADX_XGCP10
# ifdef machine_arch_type
# undef machine_arch_type
# define machine_arch_type __machine_arch_type
# else
-# define machine_arch_type MACH_TYPE_XGCP10
+# define machine_arch_type MACH_TYPE_ADX_XGCP10
# endif
-# define machine_is_adx_xgcp10() (machine_arch_type == MACH_TYPE_XGCP10)
+# define machine_is_adx_xgcp10() (machine_arch_type == MACH_TYPE_ADX_XGCP10)
#else
# define machine_is_adx_xgcp10() (0)
#endif
@@ -34944,6 +35018,894 @@ extern unsigned int __machine_arch_type;
# define machine_is_axell_h40_h50_ctrl() (0)
#endif
+#ifdef CONFIG_MACH_DTCOMMOD
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_DTCOMMOD
+# endif
+# define machine_is_dtcommod() (machine_arch_type == MACH_TYPE_DTCOMMOD)
+#else
+# define machine_is_dtcommod() (0)
+#endif
+
+#ifdef CONFIG_MACH_GOULD
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_GOULD
+# endif
+# define machine_is_gould() (machine_arch_type == MACH_TYPE_GOULD)
+#else
+# define machine_is_gould() (0)
+#endif
+
+#ifdef CONFIG_MACH_SIBERIA
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SIBERIA
+# endif
+# define machine_is_siberia() (machine_arch_type == MACH_TYPE_SIBERIA)
+#else
+# define machine_is_siberia() (0)
+#endif
+
+#ifdef CONFIG_MACH_SBC3530
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SBC3530
+# endif
+# define machine_is_sbc3530() (machine_arch_type == MACH_TYPE_SBC3530)
+#else
+# define machine_is_sbc3530() (0)
+#endif
+
+#ifdef CONFIG_MACH_QARM
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_QARM
+# endif
+# define machine_is_qarm() (machine_arch_type == MACH_TYPE_QARM)
+#else
+# define machine_is_qarm() (0)
+#endif
+
+#ifdef CONFIG_MACH_MIPS
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MIPS
+# endif
+# define machine_is_mips() (machine_arch_type == MACH_TYPE_MIPS)
+#else
+# define machine_is_mips() (0)
+#endif
+
+#ifdef CONFIG_MACH_MX27GRB
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MX27GRB
+# endif
+# define machine_is_mx27grb() (machine_arch_type == MACH_TYPE_MX27GRB)
+#else
+# define machine_is_mx27grb() (0)
+#endif
+
+#ifdef CONFIG_MACH_SBC8100
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SBC8100
+# endif
+# define machine_is_sbc8100() (machine_arch_type == MACH_TYPE_SBC8100)
+#else
+# define machine_is_sbc8100() (0)
+#endif
+
+#ifdef CONFIG_MACH_SAARB
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SAARB
+# endif
+# define machine_is_saarb() (machine_arch_type == MACH_TYPE_SAARB)
+#else
+# define machine_is_saarb() (0)
+#endif
+
+#ifdef CONFIG_MACH_OMAP3MINI
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_OMAP3MINI
+# endif
+# define machine_is_omap3mini() (machine_arch_type == MACH_TYPE_OMAP3MINI)
+#else
+# define machine_is_omap3mini() (0)
+#endif
+
+#ifdef CONFIG_MACH_CNMBOOK7SE
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_CNMBOOK7SE
+# endif
+# define machine_is_cnmbook7se() (machine_arch_type == MACH_TYPE_CNMBOOK7SE)
+#else
+# define machine_is_cnmbook7se() (0)
+#endif
+
+#ifdef CONFIG_MACH_CATAN
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_CATAN
+# endif
+# define machine_is_catan() (machine_arch_type == MACH_TYPE_CATAN)
+#else
+# define machine_is_catan() (0)
+#endif
+
+#ifdef CONFIG_MACH_HARMONY
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_HARMONY
+# endif
+# define machine_is_harmony() (machine_arch_type == MACH_TYPE_HARMONY)
+#else
+# define machine_is_harmony() (0)
+#endif
+
+#ifdef CONFIG_MACH_TONGA
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_TONGA
+# endif
+# define machine_is_tonga() (machine_arch_type == MACH_TYPE_TONGA)
+#else
+# define machine_is_tonga() (0)
+#endif
+
+#ifdef CONFIG_MACH_CYBOOK_ORIZON
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_CYBOOK_ORIZON
+# endif
+# define machine_is_cybook_orizon() (machine_arch_type == MACH_TYPE_CYBOOK_ORIZON)
+#else
+# define machine_is_cybook_orizon() (0)
+#endif
+
+#ifdef CONFIG_MACH_HTCRHODIUMCDMA
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_HTCRHODIUMCDMA
+# endif
+# define machine_is_htcrhodiumcdma() (machine_arch_type == MACH_TYPE_HTCRHODIUMCDMA)
+#else
+# define machine_is_htcrhodiumcdma() (0)
+#endif
+
+#ifdef CONFIG_MACH_EPC_G45
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_EPC_G45
+# endif
+# define machine_is_epc_g45() (machine_arch_type == MACH_TYPE_EPC_G45)
+#else
+# define machine_is_epc_g45() (0)
+#endif
+
+#ifdef CONFIG_MACH_EPC_LPC3250
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_EPC_LPC3250
+# endif
+# define machine_is_epc_lpc3250() (machine_arch_type == MACH_TYPE_EPC_LPC3250)
+#else
+# define machine_is_epc_lpc3250() (0)
+#endif
+
+#ifdef CONFIG_MACH_MXC91341EVB
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MXC91341EVB
+# endif
+# define machine_is_mxc91341evb() (machine_arch_type == MACH_TYPE_MXC91341EVB)
+#else
+# define machine_is_mxc91341evb() (0)
+#endif
+
+#ifdef CONFIG_MACH_RTW1000
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_RTW1000
+# endif
+# define machine_is_rtw1000() (machine_arch_type == MACH_TYPE_RTW1000)
+#else
+# define machine_is_rtw1000() (0)
+#endif
+
+#ifdef CONFIG_MACH_BOBCAT
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_BOBCAT
+# endif
+# define machine_is_bobcat() (machine_arch_type == MACH_TYPE_BOBCAT)
+#else
+# define machine_is_bobcat() (0)
+#endif
+
+#ifdef CONFIG_MACH_TRIZEPS6
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_TRIZEPS6
+# endif
+# define machine_is_trizeps6() (machine_arch_type == MACH_TYPE_TRIZEPS6)
+#else
+# define machine_is_trizeps6() (0)
+#endif
+
+#ifdef CONFIG_MACH_MSM7X30_FLUID
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MSM7X30_FLUID
+# endif
+# define machine_is_msm7x30_fluid() (machine_arch_type == MACH_TYPE_MSM7X30_FLUID)
+#else
+# define machine_is_msm7x30_fluid() (0)
+#endif
+
+#ifdef CONFIG_MACH_NEDAP9263
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_NEDAP9263
+# endif
+# define machine_is_nedap9263() (machine_arch_type == MACH_TYPE_NEDAP9263)
+#else
+# define machine_is_nedap9263() (0)
+#endif
+
+#ifdef CONFIG_MACH_NETGEAR_MS2110
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_NETGEAR_MS2110
+# endif
+# define machine_is_netgear_ms2110() (machine_arch_type == MACH_TYPE_NETGEAR_MS2110)
+#else
+# define machine_is_netgear_ms2110() (0)
+#endif
+
+#ifdef CONFIG_MACH_BMX
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_BMX
+# endif
+# define machine_is_bmx() (machine_arch_type == MACH_TYPE_BMX)
+#else
+# define machine_is_bmx() (0)
+#endif
+
+#ifdef CONFIG_MACH_NETSTREAM
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_NETSTREAM
+# endif
+# define machine_is_netstream() (machine_arch_type == MACH_TYPE_NETSTREAM)
+#else
+# define machine_is_netstream() (0)
+#endif
+
+#ifdef CONFIG_MACH_VPNEXT_RCU
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_VPNEXT_RCU
+# endif
+# define machine_is_vpnext_rcu() (machine_arch_type == MACH_TYPE_VPNEXT_RCU)
+#else
+# define machine_is_vpnext_rcu() (0)
+#endif
+
+#ifdef CONFIG_MACH_VPNEXT_MPU
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_VPNEXT_MPU
+# endif
+# define machine_is_vpnext_mpu() (machine_arch_type == MACH_TYPE_VPNEXT_MPU)
+#else
+# define machine_is_vpnext_mpu() (0)
+#endif
+
+#ifdef CONFIG_MACH_BCMRING_TABLET_V1
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_BCMRING_TABLET_V1
+# endif
+# define machine_is_bcmring_tablet_v1() (machine_arch_type == MACH_TYPE_BCMRING_TABLET_V1)
+#else
+# define machine_is_bcmring_tablet_v1() (0)
+#endif
+
+#ifdef CONFIG_MACH_SGARM10
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SGARM10
+# endif
+# define machine_is_sgarm10() (machine_arch_type == MACH_TYPE_SGARM10)
+#else
+# define machine_is_sgarm10() (0)
+#endif
+
+#ifdef CONFIG_MACH_CM_T3517
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_CM_T3517
+# endif
+# define machine_is_cm_t3517() (machine_arch_type == MACH_TYPE_CM_T3517)
+#else
+# define machine_is_cm_t3517() (0)
+#endif
+
+#ifdef CONFIG_MACH_OMAP3_CPS
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_OMAP3_CPS
+# endif
+# define machine_is_omap3_cps() (machine_arch_type == MACH_TYPE_OMAP3_CPS)
+#else
+# define machine_is_omap3_cps() (0)
+#endif
+
+#ifdef CONFIG_MACH_AXAR1500_RECEIVER
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_AXAR1500_RECEIVER
+# endif
+# define machine_is_axar1500_receiver() (machine_arch_type == MACH_TYPE_AXAR1500_RECEIVER)
+#else
+# define machine_is_axar1500_receiver() (0)
+#endif
+
+#ifdef CONFIG_MACH_WBD222
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_WBD222
+# endif
+# define machine_is_wbd222() (machine_arch_type == MACH_TYPE_WBD222)
+#else
+# define machine_is_wbd222() (0)
+#endif
+
+#ifdef CONFIG_MACH_MT65XX
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MT65XX
+# endif
+# define machine_is_mt65xx() (machine_arch_type == MACH_TYPE_MT65XX)
+#else
+# define machine_is_mt65xx() (0)
+#endif
+
+#ifdef CONFIG_MACH_MSM8X60_SURF
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MSM8X60_SURF
+# endif
+# define machine_is_msm8x60_surf() (machine_arch_type == MACH_TYPE_MSM8X60_SURF)
+#else
+# define machine_is_msm8x60_surf() (0)
+#endif
+
+#ifdef CONFIG_MACH_MSM8X60_SIM
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MSM8X60_SIM
+# endif
+# define machine_is_msm8x60_sim() (machine_arch_type == MACH_TYPE_MSM8X60_SIM)
+#else
+# define machine_is_msm8x60_sim() (0)
+#endif
+
+#ifdef CONFIG_MACH_VMC300
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_VMC300
+# endif
+# define machine_is_vmc300() (machine_arch_type == MACH_TYPE_VMC300)
+#else
+# define machine_is_vmc300() (0)
+#endif
+
+#ifdef CONFIG_MACH_TCC8000_SDK
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_TCC8000_SDK
+# endif
+# define machine_is_tcc8000_sdk() (machine_arch_type == MACH_TYPE_TCC8000_SDK)
+#else
+# define machine_is_tcc8000_sdk() (0)
+#endif
+
+#ifdef CONFIG_MACH_NANOS
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_NANOS
+# endif
+# define machine_is_nanos() (machine_arch_type == MACH_TYPE_NANOS)
+#else
+# define machine_is_nanos() (0)
+#endif
+
+#ifdef CONFIG_MACH_STAMP9G10
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_STAMP9G10
+# endif
+# define machine_is_stamp9g10() (machine_arch_type == MACH_TYPE_STAMP9G10)
+#else
+# define machine_is_stamp9g10() (0)
+#endif
+
+#ifdef CONFIG_MACH_STAMP9G45
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_STAMP9G45
+# endif
+# define machine_is_stamp9g45() (machine_arch_type == MACH_TYPE_STAMP9G45)
+#else
+# define machine_is_stamp9g45() (0)
+#endif
+
+#ifdef CONFIG_MACH_H6053
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_H6053
+# endif
+# define machine_is_h6053() (machine_arch_type == MACH_TYPE_H6053)
+#else
+# define machine_is_h6053() (0)
+#endif
+
+#ifdef CONFIG_MACH_SMINT01
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SMINT01
+# endif
+# define machine_is_smint01() (machine_arch_type == MACH_TYPE_SMINT01)
+#else
+# define machine_is_smint01() (0)
+#endif
+
+#ifdef CONFIG_MACH_PRTLVT2
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_PRTLVT2
+# endif
+# define machine_is_prtlvt2() (machine_arch_type == MACH_TYPE_PRTLVT2)
+#else
+# define machine_is_prtlvt2() (0)
+#endif
+
+#ifdef CONFIG_MACH_AP420
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_AP420
+# endif
+# define machine_is_ap420() (machine_arch_type == MACH_TYPE_AP420)
+#else
+# define machine_is_ap420() (0)
+#endif
+
+#ifdef CONFIG_MACH_HTCSHIFT
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_HTCSHIFT
+# endif
+# define machine_is_htcclio() (machine_arch_type == MACH_TYPE_HTCSHIFT)
+#else
+# define machine_is_htcclio() (0)
+#endif
+
+#ifdef CONFIG_MACH_DAVINCI_DM365_FC
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_DAVINCI_DM365_FC
+# endif
+# define machine_is_davinci_dm365_fc() (machine_arch_type == MACH_TYPE_DAVINCI_DM365_FC)
+#else
+# define machine_is_davinci_dm365_fc() (0)
+#endif
+
+#ifdef CONFIG_MACH_MSM8X55_SURF
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MSM8X55_SURF
+# endif
+# define machine_is_msm8x55_surf() (machine_arch_type == MACH_TYPE_MSM8X55_SURF)
+#else
+# define machine_is_msm8x55_surf() (0)
+#endif
+
+#ifdef CONFIG_MACH_MSM8X55_FFA
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MSM8X55_FFA
+# endif
+# define machine_is_msm8x55_ffa() (machine_arch_type == MACH_TYPE_MSM8X55_FFA)
+#else
+# define machine_is_msm8x55_ffa() (0)
+#endif
+
+#ifdef CONFIG_MACH_ESL_VAMANA
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_ESL_VAMANA
+# endif
+# define machine_is_esl_vamana() (machine_arch_type == MACH_TYPE_ESL_VAMANA)
+#else
+# define machine_is_esl_vamana() (0)
+#endif
+
+#ifdef CONFIG_MACH_SBC35
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SBC35
+# endif
+# define machine_is_sbc35() (machine_arch_type == MACH_TYPE_SBC35)
+#else
+# define machine_is_sbc35() (0)
+#endif
+
+#ifdef CONFIG_MACH_MPX6446
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_MPX6446
+# endif
+# define machine_is_mpx6446() (machine_arch_type == MACH_TYPE_MPX6446)
+#else
+# define machine_is_mpx6446() (0)
+#endif
+
+#ifdef CONFIG_MACH_OREO_CONTROLLER
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_OREO_CONTROLLER
+# endif
+# define machine_is_oreo_controller() (machine_arch_type == MACH_TYPE_OREO_CONTROLLER)
+#else
+# define machine_is_oreo_controller() (0)
+#endif
+
+#ifdef CONFIG_MACH_KOPIN_MODELS
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_KOPIN_MODELS
+# endif
+# define machine_is_kopin_models() (machine_arch_type == MACH_TYPE_KOPIN_MODELS)
+#else
+# define machine_is_kopin_models() (0)
+#endif
+
+#ifdef CONFIG_MACH_TTC_VISION2
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_TTC_VISION2
+# endif
+# define machine_is_ttc_vision2() (machine_arch_type == MACH_TYPE_TTC_VISION2)
+#else
+# define machine_is_ttc_vision2() (0)
+#endif
+
+#ifdef CONFIG_MACH_CNS3420VB
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_CNS3420VB
+# endif
+# define machine_is_cns3420vb() (machine_arch_type == MACH_TYPE_CNS3420VB)
+#else
+# define machine_is_cns3420vb() (0)
+#endif
+
+#ifdef CONFIG_MACH_LPC2
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_LPC2
+# endif
+# define machine_is_lpc2() (machine_arch_type == MACH_TYPE_LPC2)
+#else
+# define machine_is_lpc2() (0)
+#endif
+
+#ifdef CONFIG_MACH_OLYMPUS
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_OLYMPUS
+# endif
+# define machine_is_olympus() (machine_arch_type == MACH_TYPE_OLYMPUS)
+#else
+# define machine_is_olympus() (0)
+#endif
+
+#ifdef CONFIG_MACH_VORTEX
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_VORTEX
+# endif
+# define machine_is_vortex() (machine_arch_type == MACH_TYPE_VORTEX)
+#else
+# define machine_is_vortex() (0)
+#endif
+
+#ifdef CONFIG_MACH_S5PC200
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_S5PC200
+# endif
+# define machine_is_s5pc200() (machine_arch_type == MACH_TYPE_S5PC200)
+#else
+# define machine_is_s5pc200() (0)
+#endif
+
+#ifdef CONFIG_MACH_ECUCORE_9263
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_ECUCORE_9263
+# endif
+# define machine_is_ecucore_9263() (machine_arch_type == MACH_TYPE_ECUCORE_9263)
+#else
+# define machine_is_ecucore_9263() (0)
+#endif
+
+#ifdef CONFIG_MACH_SMDKC200
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SMDKC200
+# endif
+# define machine_is_smdkc200() (machine_arch_type == MACH_TYPE_SMDKC200)
+#else
+# define machine_is_smdkc200() (0)
+#endif
+
+#ifdef CONFIG_MACH_EMSISO_SX27
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_EMSISO_SX27
+# endif
+# define machine_is_emsiso_sx27() (machine_arch_type == MACH_TYPE_EMSISO_SX27)
+#else
+# define machine_is_emsiso_sx27() (0)
+#endif
+
+#ifdef CONFIG_MACH_APX_SOM9G45_EK
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_APX_SOM9G45_EK
+# endif
+# define machine_is_apx_som9g45_ek() (machine_arch_type == MACH_TYPE_APX_SOM9G45_EK)
+#else
+# define machine_is_apx_som9g45_ek() (0)
+#endif
+
+#ifdef CONFIG_MACH_SONGSHAN
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SONGSHAN
+# endif
+# define machine_is_songshan() (machine_arch_type == MACH_TYPE_SONGSHAN)
+#else
+# define machine_is_songshan() (0)
+#endif
+
+#ifdef CONFIG_MACH_TIANSHAN
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_TIANSHAN
+# endif
+# define machine_is_tianshan() (machine_arch_type == MACH_TYPE_TIANSHAN)
+#else
+# define machine_is_tianshan() (0)
+#endif
+
+#ifdef CONFIG_MACH_VPX500
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_VPX500
+# endif
+# define machine_is_vpx500() (machine_arch_type == MACH_TYPE_VPX500)
+#else
+# define machine_is_vpx500() (0)
+#endif
+
+#ifdef CONFIG_MACH_AM3517SAM
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_AM3517SAM
+# endif
+# define machine_is_am3517sam() (machine_arch_type == MACH_TYPE_AM3517SAM)
+#else
+# define machine_is_am3517sam() (0)
+#endif
+
+#ifdef CONFIG_MACH_SKAT91_SIM508
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SKAT91_SIM508
+# endif
+# define machine_is_skat91_sim508() (machine_arch_type == MACH_TYPE_SKAT91_SIM508)
+#else
+# define machine_is_skat91_sim508() (0)
+#endif
+
+#ifdef CONFIG_MACH_SKAT91_S3E
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_SKAT91_S3E
+# endif
+# define machine_is_skat91_s3e() (machine_arch_type == MACH_TYPE_SKAT91_S3E)
+#else
+# define machine_is_skat91_s3e() (0)
+#endif
+
+#ifdef CONFIG_MACH_OMAP4_PANDA
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_OMAP4_PANDA
+# endif
+# define machine_is_omap4_panda() (machine_arch_type == MACH_TYPE_OMAP4_PANDA)
+#else
+# define machine_is_omap4_panda() (0)
+#endif
+
+#ifdef CONFIG_MACH_DF7220
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_DF7220
+# endif
+# define machine_is_df7220() (machine_arch_type == MACH_TYPE_DF7220)
+#else
+# define machine_is_df7220() (0)
+#endif
+
/*
* These have not yet been registered
*/
diff --git a/board/Marvell/guruplug/Makefile b/board/Marvell/guruplug/Makefile
new file mode 100644
index 0000000..99748a7
--- /dev/null
+++ b/board/Marvell/guruplug/Makefile
@@ -0,0 +1,51 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Siddarth Gore <gores@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS := guruplug.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/Marvell/guruplug/config.mk b/board/Marvell/guruplug/config.mk
new file mode 100644
index 0000000..caa26b6
--- /dev/null
+++ b/board/Marvell/guruplug/config.mk
@@ -0,0 +1,27 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Siddarth Gore <gores@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+
+TEXT_BASE = 0x00600000
+
+KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c
new file mode 100644
index 0000000..ba47ca1
--- /dev/null
+++ b/board/Marvell/guruplug/guruplug.c
@@ -0,0 +1,167 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Siddarth Gore <gores@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+#include "guruplug.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ /*
+ * default gpio configuration
+ * There are maximum 64 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ kw_config_gpio(GURUPLUG_OE_VAL_LOW,
+ GURUPLUG_OE_VAL_HIGH,
+ GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH);
+
+ /* Multi-Purpose Pins Functionality configuration */
+ u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO, /* GPIO_RST */
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GE1_0,
+ MPP21_GE1_1,
+ MPP22_GE1_2,
+ MPP23_GE1_3,
+ MPP24_GE1_4,
+ MPP25_GE1_5,
+ MPP26_GE1_6,
+ MPP27_GE1_7,
+ MPP28_GE1_8,
+ MPP29_GE1_9,
+ MPP30_GE1_10,
+ MPP31_GE1_11,
+ MPP32_GE1_12,
+ MPP33_GE1_13,
+ MPP34_GE1_14,
+ MPP35_GE1_15,
+ MPP36_GPIO,
+ MPP37_GPIO,
+ MPP38_GPIO,
+ MPP39_GPIO,
+ MPP40_TDM_SPI_SCK,
+ MPP41_TDM_SPI_MISO,
+ MPP42_TDM_SPI_MOSI,
+ MPP43_GPIO,
+ MPP44_GPIO,
+ MPP45_GPIO,
+ MPP46_GPIO, /* M_RLED */
+ MPP47_GPIO, /* M_GLED */
+ MPP48_GPIO, /* B_RLED */
+ MPP49_GPIO, /* B_GLED */
+ 0
+ };
+ kirkwood_mpp_conf(kwmpp_config);
+
+ /*
+ * arch number of board
+ */
+ gd->bd->bi_arch_number = MACH_TYPE_GURUPLUG;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ int i;
+
+ for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
+ gd->bd->bi_dram[i].start = kw_sdram_bar(i);
+ gd->bd->bi_dram[i].size = kw_sdram_bs(i);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+void mv_phy_88e1121_init(char *name)
+{
+ u16 reg;
+ u16 devadr;
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
+ printf("Err..%s could not read PHY dev address\n",
+ __FUNCTION__);
+ return;
+ }
+
+ /*
+ * Enable RGMII delay on Tx and Rx for CPU port
+ * Ref: sec 4.7.2 of chip datasheet
+ */
+ miiphy_write(name, devadr, MV88E1121_PGADR_REG, 2);
+ miiphy_read(name, devadr, MV88E1121_MAC_CTRL2_REG, &reg);
+ reg |= (MV88E1121_RGMII_RXTM_CTRL | MV88E1121_RGMII_TXTM_CTRL);
+ miiphy_write(name, devadr, MV88E1121_MAC_CTRL2_REG, reg);
+ miiphy_write(name, devadr, MV88E1121_PGADR_REG, 0);
+
+ /* reset the phy */
+ if (miiphy_read (name, devadr, PHY_BMCR, &reg) != 0) {
+ printf("Err..(%s) PHY status read failed\n", __FUNCTION__);
+ return;
+ }
+ if (miiphy_write (name, devadr, PHY_BMCR, reg | 0x8000) != 0) {
+ printf("Err..(%s) PHY reset failed\n", __FUNCTION__);
+ return;
+ }
+
+ printf("88E1121 Initialized on %s\n", name);
+}
+
+void reset_phy(void)
+{
+ /* configure and initialize both PHY's */
+ mv_phy_88e1121_init("egiga0");
+ mv_phy_88e1121_init("egiga1");
+}
+#endif /* CONFIG_RESET_PHY_R */
diff --git a/board/Marvell/guruplug/guruplug.h b/board/Marvell/guruplug/guruplug.h
new file mode 100644
index 0000000..5bc16b4
--- /dev/null
+++ b/board/Marvell/guruplug/guruplug.h
@@ -0,0 +1,39 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Siddarth Gore <gores@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef __GURUPLUG_H
+#define __GURUPLUG_H
+
+#define GURUPLUG_OE_LOW (~(0))
+#define GURUPLUG_OE_HIGH (~(0))
+#define GURUPLUG_OE_VAL_LOW 0
+#define GURUPLUG_OE_VAL_HIGH (0xf << 16) /* 4 LED Pins high */
+
+/* PHY related */
+#define MV88E1121_MAC_CTRL2_REG 21
+#define MV88E1121_PGADR_REG 22
+#define MV88E1121_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1121_RGMII_RXTM_CTRL (1 << 5)
+
+#endif /* __GURUPLUG_H */
diff --git a/board/Marvell/guruplug/kwbimage.cfg b/board/Marvell/guruplug/kwbimage.cfg
new file mode 100644
index 0000000..2afd927
--- /dev/null
+++ b/board/Marvell/guruplug/kwbimage.cfg
@@ -0,0 +1,162 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Siddarth Gore <gores@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM nand
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0/1 interface pad voltage to 1.8V
+DATA 0xFFD100e0 0x1b1b9b9b
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xFFD01400 0x43000c30 # DDR Configuration register
+# bit13-0: 0xc30 (3120 DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xFFD01404 0x37543000 # DDR Controller Control Low
+# bit 4: 0=addr/cmd in smame cycle
+# bit 5: 0=clk is driven during self refresh, we don't care for APX
+# bit 6: 0=use recommended falling edge of clk for addr/cmd
+# bit14: 0=input buffer always powered up
+# bit18: 1=cpu lock transaction enabled
+# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31: 0=no additional STARTBURST delay
+
+DATA 0xFFD01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
+# bit3-0: TRAS lsbs
+# bit7-4: TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xFFD0140C 0x00000a33 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xFFD01410 0x000000cc # DDR Address Control
+# bit1-0: 01, Cs0width=x8
+# bit3-2: 10, Cs0size=1Gb
+# bit5-4: 01, Cs1width=x8
+# bit7-6: 10, Cs1size=1Gb
+# bit9-8: 00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xFFD01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0 required
+
+DATA 0xFFD0141C 0x00000C52 # DDR Mode
+# bit2-0: 2, BurstLen=2 required
+# bit3: 0, BurstType=0 required
+# bit6-4: 4, CL=5
+# bit7: 0, TestMode=0 normal
+# bit8: 0, DLL reset=0 normal
+# bit11-9: 6, auto-precharge write recovery ????????????
+# bit12: 0, PD must be zero
+# bit31-13: 0 required
+
+DATA 0xFFD01420 0x00000040 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 0, DDR drive strenght normal
+# bit2: 0, DDR ODT control lsd (disabled)
+# bit5-3: 000, required
+# bit6: 1, DDR ODT control msb, (disabled)
+# bit9-7: 000, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xFFD01424 0x0000F17F # DDR Controller Control High
+# bit2-0: 111, required
+# bit3 : 1 , MBUS Burst Chop disabled
+# bit6-4: 111, required
+# bit7 : 0
+# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz
+# bit9 : 0 , no half clock cycle addition to dataout
+# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0 required
+
+DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values)
+DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values)
+
+DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size
+# bit0: 1, Window enabled
+# bit1: 0, Write Protect disabled
+# bit3-2: 00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x0F, Size (i.e. 256MB)
+
+DATA 0xFFD01508 0x10000000 # CS[1]n Base address to 256Mb
+DATA 0xFFD0150C 0x0FFFFFF5 # CS[1]n Size 256Mb Window enabled for CS1
+
+DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00030000 # DDR ODT Control (Low)
+DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
+# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 01, ODT1 active NEVER!
+# bit31-4: zero, required
+
+DATA 0xFFD0149C 0x0000E803 # CPU ODT Control
+DATA 0xFFD01480 0x00000001 # DDR Initialization Control
+#bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/board/davedenx/qong/lowlevel_init.S b/board/davedenx/qong/lowlevel_init.S
index 198dd76..80bed92 100644
--- a/board/davedenx/qong/lowlevel_init.S
+++ b/board/davedenx/qong/lowlevel_init.S
@@ -42,6 +42,27 @@
bcs 1b
.endm
+.macro SETUP_RAM cfg, ctl
+ /* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */
+ REG 0xB8001010, 0x00000004
+ ldr r3, =\cfg
+ ldr r2, =WEIM_ESDCFG0
+ str r3, [r2]
+ REG 0xB8001000, 0x92100000
+ REG 0x80000f00, 0x12344321
+ REG 0xB8001000, 0xa2100000
+ REG 0x80000000, 0x12344321
+ REG 0x80000000, 0x12344321
+ REG 0xB8001000, 0xb2100000
+ REG8 0x80000033, 0xda
+ REG8 0x81000000, 0xff
+ ldr r3, =\ctl
+ ldr r2, =WEIM_ESDCTL0
+ str r3, [r2]
+ REG 0x80000000, 0xDEADBEEF
+ REG 0xB8001010, 0x0000000c
+
+.endm
/* RedBoot: To support 133MHz DDR */
.macro init_drive_strength
/*
@@ -130,43 +151,86 @@ lowlevel_init:
/* Default: 1, 4, 12, 1 */
REG CCM_SPCTL, PLL_PD(1) | PLL_MFD(4) | PLL_MFI(12) | PLL_MFN(1)
- /* B8xxxxxx - NAND, 8xxxxxxx - CSD0 RAM */
- REG 0xB8001010, 0x00000004
- REG 0xB8001004, ((3 << 21) | /* tXP */ \
- (0 << 20) | /* tWTR */ \
- (2 << 18) | /* tRP */ \
- (1 << 16) | /* tMRD */ \
- (0 << 15) | /* tWR */ \
- (5 << 12) | /* tRAS */ \
- (1 << 10) | /* tRRD */ \
- (3 << 8) | /* tCAS */ \
- (2 << 4) | /* tRCD */ \
- (7 << 0) /* tRC */ )
- REG 0xB8001000, 0x92100000
- REG 0x80000f00, 0x12344321
- REG 0xB8001000, 0xa2100000
- REG 0x80000000, 0x12344321
- REG 0x80000000, 0x12344321
- REG 0xB8001000, 0xb2100000
- REG8 0x80000033, 0xda
- REG8 0x81000000, 0xff
- REG 0xB8001000, ((1 << 31) | \
- (0 << 28) | \
- (0 << 27) | \
- (3 << 24) | /* 14 rows */ \
- (2 << 20) | /* 10 cols */ \
- (2 << 16) | \
- (4 << 13) | /* 3.91us (64ms/16384) */ \
- (0 << 10) | \
- (0 << 8) | \
- (1 << 7) | \
- (0 << 0))
- REG 0x80000000, 0xDEADBEEF
- REG 0xB8001010, 0x0000000c
+check_ddr_module:
+/* Set stackpointer in internal RAM to call get_ram_size */
+ ldr sp, =(IRAM_BASE_ADDR + IRAM_SIZE - 16)
+ stmfd sp!, {r0-r11, ip, lr}
+ mov ip, lr /* save link reg across call */
+
+ ldr r0,=0x08000000
+ SETUP_RAM ESDCFG0_256MB, ESDCTL0_256MB
+ ldr r0,=0x80000000
+ ldr r1,=0x10000000
+ bl get_ram_size
+ ldr r1,=0x10000000
+ cmp r0,r1
+ beq restore_regs
+ SETUP_RAM ESDCFG0_128MB, ESDCTL0_128MB
+ ldr r0,=0x80000000
+ ldr r1,=0x08000000
+ bl get_ram_size
+ ldr r1,=0x08000000
+ cmp r0,r1
+ beq restore_regs
+
+restore_regs:
+ ldmfd sp!, {r0-r11, ip, lr}
+ mov lr, ip /* restore link reg */
mov pc, lr
+
MPCTL_PARAM_399:
.word (((1 - 1) << 26) + ((52 - 1) << 16) + (7 << 10) + (35 << 0))
UPCTL_PARAM_240:
.word (((2 - 1) << 26) + ((13 - 1) << 16) + (9 << 10) + (3 << 0))
+
+ .equ ESDCFG0_128MB, \
+ (0 << 21) + /* tXP */ \
+ (1 << 20) + /* tWTR */ \
+ (2 << 18) + /* tRP */ \
+ (1 << 16) + /* tMRD */ \
+ (0 << 15) + /* tWR */ \
+ (5 << 12) + /* tRAS */ \
+ (1 << 10) + /* tRRD */ \
+ (3 << 8) + /* tCAS */ \
+ (2 << 4) + /* tRCD */ \
+ (0x0F << 0) /* tRC */
+
+ .equ ESDCTL0_128MB, \
+ (1 << 31) + /* enable */ \
+ (0 << 28) + /* mode */ \
+ (0 << 27) + /* supervisor protect */ \
+ (2 << 24) + /* 13 rows */ \
+ (2 << 20) + /* 10 cols */ \
+ (2 << 16) + /* 32 bit */ \
+ (3 << 13) + /* 7.81us (64ms/8192) */ \
+ (0 << 10) + /* power down timer */ \
+ (0 << 8) + /* full page */ \
+ (1 << 7) + /* burst length */ \
+ (0 << 0) /* precharge timer */
+
+ .equ ESDCFG0_256MB, \
+ (3 << 21) + /* tXP */ \
+ (0 << 20) + /* tWTR */ \
+ (2 << 18) + /* tRP */ \
+ (1 << 16) + /* tMRD */ \
+ (0 << 15) + /* tWR */ \
+ (5 << 12) + /* tRAS */ \
+ (1 << 10) + /* tRRD */ \
+ (3 << 8) + /* tCAS */ \
+ (2 << 4) + /* tRCD */ \
+ (7 << 0) /* tRC */
+
+ .equ ESDCTL0_256MB, \
+ (1 << 31) + \
+ (0 << 28) + \
+ (0 << 27) + \
+ (3 << 24) + /* 14 rows */ \
+ (2 << 20) + /* 10 cols */ \
+ (2 << 16) + \
+ (4 << 13) + /* 3.91us (64ms/16384) */ \
+ (0 << 10) + \
+ (0 << 8) + \
+ (1 << 7) + \
+ (0 << 0)
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index b801150..eb9218e 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -25,6 +25,7 @@
#include <netdev.h>
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
+#include <nand.h>
#include "qong_fpga.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -38,6 +39,15 @@ int dram_init (void)
return 0;
}
+static void qong_fpga_reset(void)
+{
+ mx31_gpio_set(QONG_FPGA_RST_PIN, 0);
+ udelay(30);
+ mx31_gpio_set(QONG_FPGA_RST_PIN, 1);
+
+ udelay(300);
+}
+
int board_init (void)
{
/* Chip selects */
@@ -101,6 +111,15 @@ int board_init (void)
mx31_gpio_mux(IOMUX_MODE(0x91, MUX_CTL_OUT_FUNC | MUX_CTL_IN_GPIO));
mx31_gpio_mux(IOMUX_MODE(0x92, MUX_CTL_GPIO));
mx31_gpio_mux(IOMUX_MODE(0x93, MUX_CTL_GPIO));
+
+ /* FPGA reset Pin */
+ /* rstn = 0 */
+ mx31_gpio_set(QONG_FPGA_RST_PIN, 0);
+ mx31_gpio_direction(QONG_FPGA_RST_PIN, MX31_GPIO_DIRECTION_OUT);
+
+ /* set interrupt pin as input */
+ mx31_gpio_direction(QONG_FPGA_IRQ_PIN, MX31_GPIO_DIRECTION_IN);
+
#endif
/* setup pins for UART1 */
@@ -118,7 +137,7 @@ int board_init (void)
int checkboard (void)
{
- printf("Board: DAVE/DENX QongEVB-LITE\n");
+ printf("Board: DAVE/DENX Qong\n");
return 0;
}
@@ -127,32 +146,11 @@ int misc_init_r (void)
#ifdef CONFIG_QONG_FPGA
u32 tmp;
- /* FPGA reset */
- /* rstn = 0 */
- tmp = __REG(GPIO2_BASE + GPIO_DR);
- tmp &= (~(1 << QONG_FPGA_RST_PIN));
- __REG(GPIO2_BASE + GPIO_DR) = tmp;
- /* set the GPIO as output */
- tmp = __REG(GPIO2_BASE + GPIO_GDIR);
- tmp |= (1 << QONG_FPGA_RST_PIN);
- __REG(GPIO2_BASE + GPIO_GDIR) = tmp;
- /* wait */
- udelay(30);
- /* rstn = 1 */
- tmp = __REG(GPIO2_BASE + GPIO_DR);
- tmp |= (1 << QONG_FPGA_RST_PIN);
- __REG(GPIO2_BASE + GPIO_DR) = tmp;
- /* set interrupt pin as input */
- __REG(GPIO2_BASE + GPIO_GDIR) = tmp | (1 << QONG_FPGA_IRQ_PIN);
- /* wait while the FPGA starts */
- udelay(300);
-
tmp = *(volatile u32*)QONG_FPGA_CTRL_VERSION;
printf("FPGA: ");
printf("version register = %u.%u.%u\n",
(tmp & 0xF000) >> 12, (tmp & 0x0F00) >> 8, tmp & 0x00FF);
#endif
-
return 0;
}
@@ -164,3 +162,56 @@ int board_eth_init(bd_t *bis)
return 0;
#endif
}
+
+#if defined(CONFIG_QONG_FPGA) && defined(CONFIG_NAND_PLAT)
+static void board_nand_setup(void)
+{
+
+ /* CS3: NAND 8-bit */
+ __REG(CSCR_U(3)) = 0x00004f00;
+ __REG(CSCR_L(3)) = 0x20013b31;
+ __REG(CSCR_A(3)) = 0x00020800;
+ __REG(IOMUXC_GPR) |= 1 << 13;
+
+ mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO));
+ mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_CE, MUX_CTL_IN_GPIO));
+ mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_RB, MUX_CTL_IN_GPIO));
+
+ /* Make sure to reset the fpga else you cannot access NAND */
+ qong_fpga_reset();
+
+ /* Enable NAND flash */
+ mx31_gpio_set(15, 1);
+ mx31_gpio_set(14, 1);
+ mx31_gpio_direction(15, MX31_GPIO_DIRECTION_OUT);
+ mx31_gpio_direction(16, MX31_GPIO_DIRECTION_IN);
+ mx31_gpio_direction(14, MX31_GPIO_DIRECTION_IN);
+ mx31_gpio_set(15, 0);
+
+}
+
+int qong_nand_rdy(void *chip)
+{
+ udelay(1);
+ return mx31_gpio_get(16);
+}
+
+void qong_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip >= 0)
+ mx31_gpio_set(15, 0);
+ else
+ mx31_gpio_set(15, 1);
+
+}
+
+void qong_nand_plat_init(void *chip)
+{
+ struct nand_chip *nand = (struct nand_chip *)chip;
+ nand->chip_delay = 20;
+ nand->select_chip = qong_nand_select_chip;
+ nand->options &= ~NAND_BUSWIDTH_16;
+ board_nand_setup();
+}
+
+#endif
diff --git a/board/davedenx/qong/qong_fpga.h b/board/davedenx/qong/qong_fpga.h
index e8042b1..4e11f5a 100644
--- a/board/davedenx/qong/qong_fpga.h
+++ b/board/davedenx/qong/qong_fpga.h
@@ -33,8 +33,8 @@
#define QONG_FPGA_TMS_PIN 25
#define QONG_FPGA_TDI_PIN 8
#define QONG_FPGA_TDO_PIN 7
-#define QONG_FPGA_RST_PIN 16
-#define QONG_FPGA_IRQ_PIN 8
+#define QONG_FPGA_RST_PIN 48
+#define QONG_FPGA_IRQ_PIN 40
#endif
#endif /* QONG_FPGA_H */
diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg
index db09913..a875e8f 100644
--- a/board/freescale/mx51evk/imximage.cfg
+++ b/board/freescale/mx51evk/imximage.cfg
@@ -26,7 +26,7 @@
# The syntax is taken as close as possible with the kwbimage
# Boot Device : one of
-# spi_flash, nand, onenand, sd_card
+# spi, sd (the board has no nand neither onenand)
BOOT_FROM spi
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 8754563..f0b7abc 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -72,72 +72,6 @@ static void setup_iomux_uart(void)
mxc_iomux_set_pad(MX51_PIN_UART1_CTS, pad);
}
-static void setup_expio(void)
-{
- u32 reg;
- struct weim *pweim = (struct weim *)WEIM_BASE_ADDR;
- struct clkctl *pclkctl = (struct clkctl *)CCM_BASE_ADDR;
-
- /* CS5 setup */
- mxc_request_iomux(MX51_PIN_EIM_CS5, IOMUX_CONFIG_ALT0);
- writel(0x00410089, &pweim[5].csgcr1);
- writel(0x00000002, &pweim[5].csgcr2);
-
- /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */
- writel(0x32260000, &pweim[5].csrcr1);
-
- /* APR = 0 */
- writel(0x00000000, &pweim[5].csrcr2);
-
- /*
- * WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0, WEN=0,
- * WCSA=0, WCSN=0
- */
- writel(0x72080F00, &pweim[5].cswcr1);
-
- mx51_io_board = (struct io_board_ctrl *)(CS5_BASE_ADDR +
- IO_BOARD_OFFSET);
- if ((readw(&mx51_io_board->id1) == 0xAAAA) &&
- (readw(&mx51_io_board->id2) == 0x5555)) {
- if (is_soc_rev(CHIP_REV_2_0) < 0) {
- reg = readl(&pclkctl->cbcdr);
- reg = (reg & (~0x70000)) | 0x30000;
- writel(reg, &pclkctl->cbcdr);
- /* make sure divider effective */
- while (readl(&pclkctl->cdhipr) != 0)
- ;
- writel(0x0, &pclkctl->ccdr);
- }
- } else {
- /* CS1 */
- writel(0x00410089, &pweim[1].csgcr1);
- writel(0x00000002, &pweim[1].csgcr2);
- /* RWSC=50, RADVA=2, RADVN=6, OEA=0, OEN=0, RCSA=0, RCSN=0 */
- writel(0x32260000, &pweim[1].csrcr1);
- /* APR=0 */
- writel(0x00000000, &pweim[1].csrcr2);
- /*
- * WAL=0, WBED=1, WWSC=50, WADVA=2, WADVN=6, WEA=0,
- * WEN=0, WCSA=0, WCSN=0
- */
- writel(0x72080F00, &pweim[1].cswcr1);
- mx51_io_board = (struct io_board_ctrl *)(CS1_BASE_ADDR +
- IO_BOARD_OFFSET);
- }
-
- /* Reset interrupt status reg */
- writew(0x1F, &(mx51_io_board->int_rest));
- writew(0x00, &(mx51_io_board->int_rest));
- writew(0xFFFF, &(mx51_io_board->int_mask));
-
- /* Reset the XUART and Ethernet controllers */
- reg = readw(&(mx51_io_board->sw_reset));
- reg |= 0x9;
- writew(reg, &(mx51_io_board->sw_reset));
- reg &= ~0x9;
- writew(reg, &(mx51_io_board->sw_reset));
-}
-
static void setup_iomux_fec(void)
{
/*FEC_MDIO*/
@@ -349,7 +283,6 @@ int board_init(void)
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
setup_iomux_uart();
- setup_expio();
setup_iomux_fec();
return 0;
}
diff --git a/board/freescale/mx51evk/mx51evk.h b/board/freescale/mx51evk/mx51evk.h
index 524cdcc..2854e71 100644
--- a/board/freescale/mx51evk/mx51evk.h
+++ b/board/freescale/mx51evk/mx51evk.h
@@ -47,5 +47,4 @@ struct io_board_ctrl {
};
#endif
-#define IO_BOARD_OFFSET (0x20000)
#endif
diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c
index 63375d5..4427415 100644
--- a/board/logicpd/imx27lite/imx27lite.c
+++ b/board/logicpd/imx27lite/imx27lite.c
@@ -29,6 +29,10 @@ DECLARE_GLOBAL_DATA_PTR;
int board_init (void)
{
struct gpio_regs *regs = (struct gpio_regs *)IMX_GPIO_BASE;
+#if defined(CONFIG_SYS_NAND_LARGEPAGE)
+ struct system_control_regs *sc_regs =
+ (struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
+#endif
gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
@@ -43,9 +47,20 @@ int board_init (void)
&regs->port[PORTC].dr);
#endif
#ifdef CONFIG_MXC_MMC
+#if defined(CONFIG_MAGNESIUM)
+ mx27_sd1_init_pins();
+#else
mx27_sd2_init_pins();
#endif
+#endif
+#if defined(CONFIG_SYS_NAND_LARGEPAGE)
+ /*
+ * set in FMCR NF_FMS Bit(5) to 1
+ * (NAND Flash with 2 Kbyte page size)
+ */
+ writel(readl(&sc_regs->fmcr) | (1 << 5), &sc_regs->fmcr);
+#endif
return 0;
}
@@ -68,6 +83,7 @@ int dram_init (void)
int checkboard(void)
{
- printf("LogicPD imx27lite\n");
+ puts ("Board: ");
+ puts(CONFIG_BOARDNAME);
return 0;
}
diff --git a/board/ronetix/pm9261/led.c b/board/ronetix/pm9261/led.c
index 396c3e7..ff21ce6 100644
--- a/board/ronetix/pm9261/led.c
+++ b/board/ronetix/pm9261/led.c
@@ -26,19 +26,21 @@
#include <common.h>
#include <asm/arch/at91sam9261.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
#include <asm/arch/io.h>
void coloured_LED_init(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+ writel(1 << AT91SAM9261_ID_PIOC, &pmc->pcer);
- at91_set_gpio_output(CONFIG_RED_LED, 1);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_output(CONFIG_YELLOW_LED, 1);
+ at91_set_pio_output(CONFIG_RED_LED, 1);
+ at91_set_pio_output(CONFIG_GREEN_LED, 1);
+ at91_set_pio_output(CONFIG_YELLOW_LED, 1);
- at91_set_gpio_value(CONFIG_RED_LED, 0);
- at91_set_gpio_value(CONFIG_GREEN_LED, 1);
- at91_set_gpio_value(CONFIG_YELLOW_LED, 1);
+ at91_set_pio_value(CONFIG_RED_LED, 0);
+ at91_set_pio_value(CONFIG_GREEN_LED, 1);
+ at91_set_pio_value(CONFIG_YELLOW_LED, 1);
}
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index 8662339..53d8c48 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -27,13 +27,14 @@
#include <common.h>
#include <asm/sizes.h>
#include <asm/arch/at91sam9261.h>
-#include <asm/arch/at91sam9261_matrix.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
#include <asm/arch/io.h>
#include <asm/arch/hardware.h>
#include <lcd.h>
@@ -55,39 +56,48 @@ DECLARE_GLOBAL_DATA_PTR;
static void pm9261_nand_hw_init(void)
{
unsigned long csa;
+ at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE;
+ at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
/* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA,
- csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
+ csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A;
+ writel(csa, &matrix->csa);
/* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[3].setup);
+
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
+ AT91_SMC_MODE_DBW_16 |
#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
+ AT91_SMC_MODE_DBW_8 |
#endif
- AT91_SMC_TDF_(2));
+ AT91_SMC_MODE_TDF_CYCLE(2),
+ &smc->cs[3].mode);
+
+ writel(1 << AT91SAM9261_ID_PIOA |
+ 1 << AT91SAM9261_ID_PIOC,
+ &pmc->pcer);
/* Configure RDY/BSY */
- at91_set_gpio_input(AT91_PIN_PA16, 1);
+ at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
/* Enable NandFlash */
- at91_set_gpio_output(AT91_PIN_PC14, 1);
+ at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
- at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
- at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
+ at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* NANDOE */
+ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* NANDWE */
}
#endif
@@ -95,23 +105,30 @@ static void pm9261_nand_hw_init(void)
#ifdef CONFIG_DRIVER_DM9000
static void pm9261_dm9000_hw_init(void)
{
+ at91_smc_t *smc = (at91_smc_t *) AT91_SMC_BASE;
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
/* Configure SMC CS2 for DM9000 */
- at91_sys_write(AT91_SMC_SETUP(2),
- AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC_PULSE(2),
- AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) |
- AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8));
- at91_sys_write(AT91_SMC_CYCLE(2),
- AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16));
- at91_sys_write(AT91_SMC_MODE(2),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
- AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 |
- AT91_SMC_TDF_(1));
+ writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[2].setup);
+
+ writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(8) |
+ AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(8),
+ &smc->cs[2].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(16) | AT91_SMC_CYCLE_NRD(16),
+ &smc->cs[2].cycle);
+
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
+ AT91_SMC_MODE_BAT | AT91_SMC_MODE_DBW_16 |
+ AT91_SMC_MODE_TDF_CYCLE(1),
+ &smc->cs[2].mode);
/* Configure Interrupt pin as input, no pull-up */
- at91_set_gpio_input(AT91_PIN_PA24, 0);
+ writel(1 << AT91SAM9261_ID_PIOA, &pmc->pcer);
+ at91_set_pio_input(AT91_PIO_PORTA, 24, 0);
}
#endif
@@ -135,40 +152,42 @@ vidinfo_t panel_info = {
void lcd_enable(void)
{
- at91_set_gpio_value(AT91_PIN_PA22, 0); /* power up */
+ at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power up */
}
void lcd_disable(void)
{
- at91_set_gpio_value(AT91_PIN_PA22, 1); /* power down */
+ at91_set_pio_value(AT91_PIO_PORTA, 22, 1); /* power down */
}
static void pm9261_lcd_hw_init(void)
{
- at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
- at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
- at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
- at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
- at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
-
- at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1);
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
+ at91_set_a_periph(AT91_PIO_PORTB, 1, 0); /* LCDHSYNC */
+ at91_set_a_periph(AT91_PIO_PORTB, 2, 0); /* LCDDOTCK */
+ at91_set_a_periph(AT91_PIO_PORTB, 3, 0); /* LCDDEN */
+ at91_set_a_periph(AT91_PIO_PORTB, 4, 0); /* LCDCC */
+ at91_set_a_periph(AT91_PIO_PORTB, 7, 0); /* LCDD2 */
+ at91_set_a_periph(AT91_PIO_PORTB, 8, 0); /* LCDD3 */
+ at91_set_a_periph(AT91_PIO_PORTB, 9, 0); /* LCDD4 */
+ at91_set_a_periph(AT91_PIO_PORTB, 10, 0); /* LCDD5 */
+ at91_set_a_periph(AT91_PIO_PORTB, 11, 0); /* LCDD6 */
+ at91_set_a_periph(AT91_PIO_PORTB, 12, 0); /* LCDD7 */
+ at91_set_a_periph(AT91_PIO_PORTB, 15, 0); /* LCDD10 */
+ at91_set_a_periph(AT91_PIO_PORTB, 16, 0); /* LCDD11 */
+ at91_set_a_periph(AT91_PIO_PORTB, 17, 0); /* LCDD12 */
+ at91_set_a_periph(AT91_PIO_PORTB, 18, 0); /* LCDD13 */
+ at91_set_a_periph(AT91_PIO_PORTB, 19, 0); /* LCDD14 */
+ at91_set_a_periph(AT91_PIO_PORTB, 20, 0); /* LCDD15 */
+ at91_set_b_periph(AT91_PIO_PORTB, 23, 0); /* LCDD18 */
+ at91_set_b_periph(AT91_PIO_PORTB, 24, 0); /* LCDD19 */
+ at91_set_b_periph(AT91_PIO_PORTB, 25, 0); /* LCDD20 */
+ at91_set_b_periph(AT91_PIO_PORTB, 26, 0); /* LCDD21 */
+ at91_set_b_periph(AT91_PIO_PORTB, 27, 0); /* LCDD22 */
+ at91_set_b_periph(AT91_PIO_PORTB, 28, 0); /* LCDD23 */
+
+ writel(1 << 17, &pmc->scer); /* LCD controller Clock, AT91SAM9261 only */
gd->fb_base = AT91SAM9261_SRAM_BASE;
}
@@ -222,11 +241,14 @@ void lcd_show_board_info(void)
int board_init(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
/* Enable Ctrlc */
console_init_f();
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA);
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC);
+ writel(1 << AT91SAM9261_ID_PIOA |
+ 1 << AT91SAM9261_ID_PIOC,
+ &pmc->pcer);
/* arch number of PM9261-Board */
gd->bd->bi_arch_number = MACH_TYPE_PM9261;
diff --git a/board/ronetix/pm9263/led.c b/board/ronetix/pm9263/led.c
index fe1a1d2..4e585a4 100644
--- a/board/ronetix/pm9263/led.c
+++ b/board/ronetix/pm9263/led.c
@@ -26,18 +26,19 @@
#include <common.h>
#include <asm/arch/at91sam9263.h>
#include <asm/arch/at91_pmc.h>
-#include <asm/arch/gpio.h>
+#include <asm/arch/at91_pio.h>
#include <asm/arch/io.h>
void coloured_LED_init(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB |
- 1 << AT91SAM9263_ID_PIOCDE);
+ writel(1 << AT91SAM9263_ID_PIOB, &pmc->pcer);
- at91_set_gpio_output(CONFIG_RED_LED, 1);
- at91_set_gpio_output(CONFIG_GREEN_LED, 1);
+ at91_set_pio_output(CONFIG_RED_LED, 1);
+ at91_set_pio_output(CONFIG_GREEN_LED, 1);
- at91_set_gpio_value(CONFIG_RED_LED, 0);
- at91_set_gpio_value(CONFIG_GREEN_LED, 1);
+ at91_set_pio_value(CONFIG_RED_LED, 0);
+ at91_set_pio_value(CONFIG_GREEN_LED, 1);
}
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index 23ea154..c7835de 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -27,13 +27,13 @@
#include <common.h>
#include <asm/sizes.h>
#include <asm/arch/at91sam9263.h>
-#include <asm/arch/at91sam9263_matrix.h>
#include <asm/arch/at91sam9_smc.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91_pmc.h>
#include <asm/arch/at91_rstc.h>
+#include <asm/arch/at91_matrix.h>
+#include <asm/arch/at91_pio.h>
#include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
#include <asm/arch/io.h>
#include <asm/arch/hardware.h>
#include <lcd.h>
@@ -55,52 +55,59 @@ DECLARE_GLOBAL_DATA_PTR;
static void pm9263_nand_hw_init(void)
{
unsigned long csa;
+ at91_smc_t *smc = (at91_smc_t *) AT91_SMC0_BASE;
+ at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
/* Enable CS3 */
- csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
- at91_sys_write(AT91_MATRIX_EBI0CSA,
- csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
+ csa = readl(&matrix->csa[0]) | AT91_MATRIX_CSA_EBI_CS3A;
+ writel(csa, &matrix->csa[0]);
/* Configure SMC CS3 for NAND/SmartMedia */
- at91_sys_write(AT91_SMC_SETUP(3),
- AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(1) |
- AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(1));
- at91_sys_write(AT91_SMC_PULSE(3),
- AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
- AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
- at91_sys_write(AT91_SMC_CYCLE(3),
- AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
- at91_sys_write(AT91_SMC_MODE(3),
- AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE |
+ writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(1) |
+ AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(1),
+ &smc->cs[3].setup);
+
+ writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
+ AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
+ &smc->cs[3].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
+ &smc->cs[3].cycle);
+
+ writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
+ AT91_SMC_MODE_EXNW_DISABLE |
#ifdef CONFIG_SYS_NAND_DBW_16
- AT91_SMC_DBW_16 |
+ AT91_SMC_MODE_DBW_16 |
#else /* CONFIG_SYS_NAND_DBW_8 */
- AT91_SMC_DBW_8 |
+ AT91_SMC_MODE_DBW_8 |
#endif
- AT91_SMC_TDF_(2));
+ AT91_SMC_MODE_TDF_CYCLE(2),
+ &smc->cs[3].mode);
/* Configure RDY/BSY */
- at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1);
+ at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
/* Enable NandFlash */
- at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
+ at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
}
#endif
#ifdef CONFIG_MACB
static void pm9263_macb_hw_init(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+ at91_pio_t *pio = (at91_pio_t *) AT91_PIO_BASE;
+
/*
* PB27 enables the 50MHz oscillator for Ethernet PHY
* 1 - enable
* 0 - disable
*/
- at91_set_gpio_output(AT91_PIN_PB27, 1);
- at91_set_gpio_value(AT91_PIN_PB27, 1); /* 1- enable, 0 - disable */
+ at91_set_pio_output(AT91_PIO_PORTB, 27, 1);
+ at91_set_pio_value(AT91_PIO_PORTB, 27, 1); /* 1- enable, 0 - disable */
/* Enable clock */
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
+ writel(1 << AT91SAM9263_ID_EMAC, &pmc->pcer);
/*
* Disable pull-up on:
@@ -110,19 +117,15 @@ static void pm9263_macb_hw_init(void)
*
* PHY has internal pull-down
*/
- writel(pin_to_mask(AT91_PIN_PC25),
- pin_to_controller(AT91_PIN_PC0) + PIO_PUDR);
- writel(pin_to_mask(AT91_PIN_PE25) |
- pin_to_mask(AT91_PIN_PE26),
- pin_to_controller(AT91_PIN_PE0) + PIO_PUDR);
+ at91_set_pio_pullup(AT91_PIO_PORTC, 25, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTE, 25, 0);
+ at91_set_pio_pullup(AT91_PIO_PORTE, 26, 0);
/* Re-enable pull-up */
- writel(pin_to_mask(AT91_PIN_PC25),
- pin_to_controller(AT91_PIN_PC0) + PIO_PUER);
- writel(pin_to_mask(AT91_PIN_PE25) |
- pin_to_mask(AT91_PIN_PE26),
- pin_to_controller(AT91_PIN_PE0) + PIO_PUER);
+ at91_set_pio_pullup(AT91_PIO_PORTC, 25, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTE, 25, 1);
+ at91_set_pio_pullup(AT91_PIO_PORTE, 26, 1);
at91_macb_hw_init();
}
@@ -148,17 +151,17 @@ vidinfo_t panel_info = {
void lcd_enable(void)
{
- at91_set_gpio_value(AT91_PIN_PA22, 1); /* power up */
+ at91_set_pio_value(AT91_PIO_PORTA, 22, 1); /* power up */
}
void lcd_disable(void)
{
- at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */
+ at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */
}
#ifdef CONFIG_LCD_IN_PSRAM
-#define PSRAM_CRE_PIN AT91_PIN_PB29
+#define PSRAM_CRE_PIN AT91_PIO_PORTB, 29
#define PSRAM_CTRL_REG (PHYS_PSRAM + PHYS_PSRAM_SIZE - 2)
/* Initialize the PSRAM memory */
@@ -166,31 +169,34 @@ static int pm9263_lcd_hw_psram_init(void)
{
volatile uint16_t x;
unsigned long csa;
+ at91_smc_t *smc = (at91_smc_t *) AT91_SMC1_BASE;
+ at91_matrix_t *matrix = (at91_matrix_t *) AT91_MATRIX_BASE;
/* Enable CS3 3.3v, no pull-ups */
- csa = at91_sys_read(AT91_MATRIX_EBI1CSA);
- at91_sys_write(AT91_MATRIX_EBI1CSA,
- csa | AT91_MATRIX_EBI1_DBPUC |
- AT91_MATRIX_EBI1_VDDIOMSEL_3_3V);
+ csa = readl(&matrix->csa[1]) | AT91_MATRIX_CSA_DBPUC |
+ AT91_MATRIX_CSA_VDDIOMSEL_3_3V;
+
+ writel(csa, &matrix->csa[1]);
/* Configure SMC1 CS0 for PSRAM - 16-bit */
- at91_sys_write(AT91_SMC1_SETUP(0),
- AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) |
- AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0));
- at91_sys_write(AT91_SMC1_PULSE(0),
- AT91_SMC_NWEPULSE_(7) | AT91_SMC_NCS_WRPULSE_(7) |
- AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(7));
- at91_sys_write(AT91_SMC1_CYCLE(0),
- AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(8));
- at91_sys_write(AT91_SMC1_MODE(0),
- AT91_SMC_DBW_16 |
- AT91_SMC_PMEN |
- AT91_SMC_PS_32);
+ writel(AT91_SMC_SETUP_NWE(0) | AT91_SMC_SETUP_NCS_WR(0) |
+ AT91_SMC_SETUP_NRD(0) | AT91_SMC_SETUP_NCS_RD(0),
+ &smc->cs[0].setup);
+
+ writel(AT91_SMC_PULSE_NWE(7) | AT91_SMC_PULSE_NCS_WR(7) |
+ AT91_SMC_PULSE_NRD(2) | AT91_SMC_PULSE_NCS_RD(7),
+ &smc->cs[0].pulse);
+
+ writel(AT91_SMC_CYCLE_NWE(8) | AT91_SMC_CYCLE_NRD(8),
+ &smc->cs[0].cycle);
+
+ writel(AT91_SMC_MODE_DBW_16 | AT91_SMC_MODE_PMEN | AT91_SMC_MODE_PS_32,
+ &smc->cs[0].mode);
/* setup PB29 as output */
- at91_set_gpio_output(PSRAM_CRE_PIN, 1);
+ at91_set_pio_output(PSRAM_CRE_PIN, 1);
- at91_set_gpio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */
+ at91_set_pio_value(PSRAM_CRE_PIN, 0); /* set PSRAM_CRE_PIN to '0' */
/* PSRAM: write BCR */
x = readw(PSRAM_CTRL_REG);
@@ -216,7 +222,7 @@ static int pm9263_lcd_hw_psram_init(void)
/* test if the chip is MT45W2M16B */
if ((readw(PHYS_PSRAM) != 0x1234) || (readw(PHYS_PSRAM+2) != 0x5678)) {
/* try with CRE=1 (MT45W2M16A) */
- at91_set_gpio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */
+ at91_set_pio_value(PSRAM_CRE_PIN, 1); /* set PSRAM_CRE_PIN to '1' */
/* write RCR of the PSRAM */
x = readw(PSRAM_CTRL_REG);
@@ -229,17 +235,14 @@ static int pm9263_lcd_hw_psram_init(void)
writew(0x1234, PHYS_PSRAM);
writew(0x5678, PHYS_PSRAM+2);
if ((readw(PHYS_PSRAM) != 0x1234)
- || (readw(PHYS_PSRAM + 2) != 0x5678))
+ || (readw(PHYS_PSRAM + 2) != 0x5678))
return 1;
}
/* Bus matrix */
- at91_sys_write( AT91_MATRIX_PRAS5, AT91_MATRIX_M5PR );
- at91_sys_write( AT91_MATRIX_SCFG5, AT91_MATRIX_ARBT_FIXED_PRIORITY |
- (AT91_MATRIX_FIXED_DEFMSTR & (5 << 18)) |
- AT91_MATRIX_DEFMSTR_TYPE_FIXED |
- (AT91_MATRIX_SLOT_CYCLE & (0xFF << 0)));
+ writel(AT91_MATRIX_PRA_M5(3), &matrix->pr[5].a);
+ writel(CONFIG_PSRAM_SCFG, &matrix->scfg[5]);
return 0;
}
@@ -247,35 +250,37 @@ static int pm9263_lcd_hw_psram_init(void)
static void pm9263_lcd_hw_init(void)
{
- at91_set_A_periph(AT91_PIN_PC0, 0); /* LCDVSYNC */
- at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
- at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-
- at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
+ at91_set_a_periph(AT91_PIO_PORTC, 0, 0); /* LCDVSYNC */
+ at91_set_a_periph(AT91_PIO_PORTC, 1, 0); /* LCDHSYNC */
+ at91_set_a_periph(AT91_PIO_PORTC, 2, 0); /* LCDDOTCK */
+ at91_set_a_periph(AT91_PIO_PORTC, 3, 0); /* LCDDEN */
+ at91_set_b_periph(AT91_PIO_PORTB, 9, 0); /* LCDCC */
+ at91_set_a_periph(AT91_PIO_PORTC, 6, 0); /* LCDD2 */
+ at91_set_a_periph(AT91_PIO_PORTC, 7, 0); /* LCDD3 */
+ at91_set_a_periph(AT91_PIO_PORTC, 8, 0); /* LCDD4 */
+ at91_set_a_periph(AT91_PIO_PORTC, 9, 0); /* LCDD5 */
+ at91_set_a_periph(AT91_PIO_PORTC, 10, 0); /* LCDD6 */
+ at91_set_a_periph(AT91_PIO_PORTC, 11, 0); /* LCDD7 */
+ at91_set_a_periph(AT91_PIO_PORTC, 14, 0); /* LCDD10 */
+ at91_set_a_periph(AT91_PIO_PORTC, 15, 0); /* LCDD11 */
+ at91_set_a_periph(AT91_PIO_PORTC, 16, 0); /* LCDD12 */
+ at91_set_b_periph(AT91_PIO_PORTC, 12, 0); /* LCDD13 */
+ at91_set_a_periph(AT91_PIO_PORTC, 18, 0); /* LCDD14 */
+ at91_set_a_periph(AT91_PIO_PORTC, 19, 0); /* LCDD15 */
+ at91_set_a_periph(AT91_PIO_PORTC, 22, 0); /* LCDD18 */
+ at91_set_a_periph(AT91_PIO_PORTC, 23, 0); /* LCDD19 */
+ at91_set_a_periph(AT91_PIO_PORTC, 24, 0); /* LCDD20 */
+ at91_set_b_periph(AT91_PIO_PORTC, 17, 0); /* LCDD21 */
+ at91_set_a_periph(AT91_PIO_PORTC, 26, 0); /* LCDD22 */
+ at91_set_a_periph(AT91_PIO_PORTC, 27, 0); /* LCDD23 */
+
+ writel(1 << AT91SAM9263_ID_LCDC, &pmc->pcer);
/* Power Control */
- at91_set_gpio_output(AT91_PIN_PA22, 1);
- at91_set_gpio_value(AT91_PIN_PA22, 0); /* power down */
+ at91_set_pio_output(AT91_PIO_PORTA, 22, 1);
+ at91_set_pio_value(AT91_PIO_PORTA, 22, 0); /* power down */
#ifdef CONFIG_LCD_IN_PSRAM
/* initialize te PSRAM */
@@ -337,13 +342,15 @@ void lcd_show_board_info(void)
int board_init(void)
{
+ at91_pmc_t *pmc = (at91_pmc_t *) AT91_PMC_BASE;
+
/* Enable Ctrlc */
console_init_f();
- at91_sys_write(AT91_PMC_PCER,
- (1 << AT91SAM9263_ID_PIOA) |
- (1 << AT91SAM9263_ID_PIOCDE) |
- (1 << AT91SAM9263_ID_PIOB));
+ writel((1 << AT91SAM9263_ID_PIOA) |
+ (1 << AT91SAM9263_ID_PIOCDE) |
+ (1 << AT91SAM9263_ID_PIOB),
+ &pmc->pcer);
/* arch number of AT91SAM9263EK-Board */
gd->bd->bi_arch_number = MACH_TYPE_PM9263;
@@ -394,7 +401,7 @@ int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_MACB
- rc = macb_eth_initialize(0, (void *)AT91SAM9263_BASE_EMAC, 0x01);
+ rc = macb_eth_initialize(0, (void *)AT91_EMAC_BASE, 0x01);
#endif
return rc;
}
diff --git a/common/serial.c b/common/serial.c
index 754e329..0682faa 100644
--- a/common/serial.c
+++ b/common/serial.c
@@ -79,13 +79,13 @@ struct serial_device *__default_serial_console (void)
#endif
#elif defined(CONFIG_S5PC1XX)
#if defined(CONFIG_SERIAL0)
- return &s5pc1xx_serial0_device;
+ return &s5p_serial0_device;
#elif defined(CONFIG_SERIAL1)
- return &s5pc1xx_serial1_device;
+ return &s5p_serial1_device;
#elif defined(CONFIG_SERIAL2)
- return &s5pc1xx_serial2_device;
+ return &s5p_serial2_device;
#elif defined(CONFIG_SERIAL3)
- return &s5pc1xx_serial3_device;
+ return &s5p_serial3_device;
#else
#error "CONFIG_SERIAL? missing."
#endif
@@ -162,10 +162,10 @@ void serial_initialize (void)
serial_register(&s3c24xx_serial2_device);
#endif
#if defined(CONFIG_S5PC1XX)
- serial_register(&s5pc1xx_serial0_device);
- serial_register(&s5pc1xx_serial1_device);
- serial_register(&s5pc1xx_serial2_device);
- serial_register(&s5pc1xx_serial3_device);
+ serial_register(&s5p_serial0_device);
+ serial_register(&s5p_serial1_device);
+ serial_register(&s5p_serial2_device);
+ serial_register(&s5p_serial3_device);
#endif
#if defined(CONFIG_MPC512X)
#if defined(CONFIG_SYS_PSC1)
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index d966082..528ca2e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -29,6 +29,7 @@ COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o
COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
COBJS-$(CONFIG_MX31_GPIO) += mx31_gpio.o
COBJS-$(CONFIG_PCA953X) += pca953x.o
+COBJS-$(CONFIG_S5PC1XX) += s5p_gpio.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/gpio/mx31_gpio.c b/drivers/gpio/mx31_gpio.c
index 737aafa..b07f038 100644
--- a/drivers/gpio/mx31_gpio.c
+++ b/drivers/gpio/mx31_gpio.c
@@ -71,3 +71,18 @@ void mx31_gpio_set(unsigned int gpio, unsigned int value)
l &= ~(1 << gpio);
__REG(gpio_ports[port] + GPIO_DR) = l;
}
+
+int mx31_gpio_get(unsigned int gpio)
+{
+ unsigned int port = gpio >> 5;
+ u32 l;
+
+ if (port >= ARRAY_SIZE(gpio_ports))
+ return -1;
+
+ gpio &= 0x1f;
+
+ l = (__REG(gpio_ports[port] + GPIO_DR) >> gpio) & 0x01;
+
+ return l;
+}
diff --git a/arch/arm/cpu/arm_cortexa8/s5pc1xx/gpio.c b/drivers/gpio/s5p_gpio.c
index a97244b..0439477 100644
--- a/arch/arm/cpu/arm_cortexa8/s5pc1xx/gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -36,7 +36,7 @@
#define RATE_MASK(x) (0x1 << (x + 16))
#define RATE_SET(x) (0x1 << (x + 16))
-void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg)
+void gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg)
{
unsigned int value;
@@ -46,7 +46,7 @@ void gpio_cfg_pin(struct s5pc1xx_gpio_bank *bank, int gpio, int cfg)
writel(value, &bank->con);
}
-void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en)
+void gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
{
unsigned int value;
@@ -59,12 +59,12 @@ void gpio_direction_output(struct s5pc1xx_gpio_bank *bank, int gpio, int en)
writel(value, &bank->dat);
}
-void gpio_direction_input(struct s5pc1xx_gpio_bank *bank, int gpio)
+void gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
{
gpio_cfg_pin(bank, gpio, GPIO_INPUT);
}
-void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en)
+void gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
{
unsigned int value;
@@ -75,7 +75,7 @@ void gpio_set_value(struct s5pc1xx_gpio_bank *bank, int gpio, int en)
writel(value, &bank->dat);
}
-unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio)
+unsigned int gpio_get_value(struct s5p_gpio_bank *bank, int gpio)
{
unsigned int value;
@@ -83,7 +83,7 @@ unsigned int gpio_get_value(struct s5pc1xx_gpio_bank *bank, int gpio)
return !!(value & DAT_MASK(gpio));
}
-void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
+void gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
@@ -102,7 +102,7 @@ void gpio_set_pull(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
writel(value, &bank->pull);
}
-void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
+void gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
@@ -123,7 +123,7 @@ void gpio_set_drv(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
writel(value, &bank->drv);
}
-void gpio_set_rate(struct s5pc1xx_gpio_bank *bank, int gpio, int mode)
+void gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
{
unsigned int value;
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index d2b4820..c731bfb 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -36,7 +36,7 @@ COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
-COBJS-$(CONFIG_S5PC1XX) += serial_s5pc1xx.o
+COBJS-$(CONFIG_S5PC1XX) += serial_s5p.o
COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial.o
COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o
COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
diff --git a/drivers/serial/serial_s5pc1xx.c b/drivers/serial/serial_s5p.c
index 8da0c86..9747db3 100644
--- a/drivers/serial/serial_s5pc1xx.c
+++ b/drivers/serial/serial_s5p.c
@@ -27,18 +27,18 @@
#include <asm/arch/clk.h>
#include <serial.h>
-static inline struct s5pc1xx_uart *s5pc1xx_get_base_uart(int dev_index)
+static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
{
- u32 offset = dev_index * sizeof(struct s5pc1xx_uart);
+ u32 offset = dev_index * sizeof(struct s5p_uart);
if (cpu_is_s5pc100())
- return (struct s5pc1xx_uart *)(S5PC100_UART_BASE + offset);
+ return (struct s5p_uart *)(S5PC100_UART_BASE + offset);
else
- return (struct s5pc1xx_uart *)(S5PC110_UART_BASE + offset);
+ return (struct s5p_uart *)(S5PC110_UART_BASE + offset);
}
/*
- * The coefficient, used to calculate the baudrate on S5PC1XX UARTs is
+ * The coefficient, used to calculate the baudrate on S5P UARTs is
* calculated as
* C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
* however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
@@ -66,7 +66,7 @@ static const int udivslot[] = {
void serial_setbrg_dev(const int dev_index)
{
DECLARE_GLOBAL_DATA_PTR;
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
u32 pclk = get_pclk();
u32 baudrate = gd->baudrate;
u32 val;
@@ -83,7 +83,7 @@ void serial_setbrg_dev(const int dev_index)
*/
int serial_init_dev(const int dev_index)
{
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
/* reset and enable FIFOs, set triggers to the maximum */
writel(0, &uart->ufcon);
@@ -100,7 +100,7 @@ int serial_init_dev(const int dev_index)
static int serial_err_check(const int dev_index, int op)
{
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
unsigned int mask;
/*
@@ -125,7 +125,7 @@ static int serial_err_check(const int dev_index, int op)
*/
int serial_getc_dev(const int dev_index)
{
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
/* wait for character to arrive */
while (!(readl(&uart->utrstat) & 0x1)) {
@@ -141,7 +141,7 @@ int serial_getc_dev(const int dev_index)
*/
void serial_putc_dev(const char c, const int dev_index)
{
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
/* wait for room in the tx FIFO */
while (!(readl(&uart->utrstat) & 0x2)) {
@@ -161,7 +161,7 @@ void serial_putc_dev(const char c, const int dev_index)
*/
int serial_tstc_dev(const int dev_index)
{
- struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index);
+ struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
return (int)(readl(&uart->utrstat) & 0x1);
}
@@ -193,14 +193,14 @@ void s5p_serial##port##_puts(const char *s) { serial_puts_dev(s, port); }
s5p_serial##port##_puts, }
DECLARE_S5P_SERIAL_FUNCTIONS(0);
-struct serial_device s5pc1xx_serial0_device =
+struct serial_device s5p_serial0_device =
INIT_S5P_SERIAL_STRUCTURE(0, "s5pser0", "S5PUART0");
DECLARE_S5P_SERIAL_FUNCTIONS(1);
-struct serial_device s5pc1xx_serial1_device =
+struct serial_device s5p_serial1_device =
INIT_S5P_SERIAL_STRUCTURE(1, "s5pser1", "S5PUART1");
DECLARE_S5P_SERIAL_FUNCTIONS(2);
-struct serial_device s5pc1xx_serial2_device =
+struct serial_device s5p_serial2_device =
INIT_S5P_SERIAL_STRUCTURE(2, "s5pser2", "S5PUART2");
DECLARE_S5P_SERIAL_FUNCTIONS(3);
-struct serial_device s5pc1xx_serial3_device =
+struct serial_device s5p_serial3_device =
INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3", "S5PUART3");
diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
new file mode 100644
index 0000000..2fbc6ad
--- /dev/null
+++ b/include/configs/guruplug.h
@@ -0,0 +1,198 @@
+/*
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Siddarth Gore <gores@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#ifndef _CONFIG_GURUPLUG_H
+#define _CONFIG_GURUPLUG_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING "\nMarvell-GuruPlug"
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_MARVELL 1
+#define CONFIG_ARM926EJS 1 /* Basic Architecture */
+#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
+#define CONFIG_KW88F6281 1 /* SOC Name */
+#define CONFIG_MACH_GURUPLUG /* Machine type */
+
+#define CONFIG_MD5 /* get_random_hex on krikwood needs MD5 support */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+#define CONFIG_KIRKWOOD_EGIGA_INIT /* Enable GbePort0/1 for kernel */
+#define CONFIG_KIRKWOOD_RGMII_PAD_1V8 /* Set RGMII Pad voltage to 1.8V */
+
+/*
+ * CLKs configurations
+ */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
+#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
+
+/*
+ * Serial Port configuration
+ * The following definitions let you select what serial you want to use
+ * for your console driver.
+ */
+
+#define CONFIG_CONS_INDEX 1 /*Console on UART0 */
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
+ 115200,230400, 460800, 921600 }
+/* auto boot */
+#define CONFIG_BOOTDELAY 3 /* default enable autoboot */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_INITRD_TAG 1 /* enable INITRD tag */
+#define CONFIG_SETUP_MEMORY_TAGS 1 /* enable memory tag */
+
+#define CONFIG_SYS_PROMPT "Marvell>> " /* Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ +sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+/*
+ * NAND configuration
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_KIRKWOOD
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */
+#define NAND_ALLOW_ERASE_ALL 1
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+#endif
+
+/*
+ * Environment variables configurations
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND 1
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
+#else
+#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
+#endif
+/*
+ * max 4k env size is enough, but in case of nand
+ * it has to be rounded to sector size
+ */
+#define CONFIG_ENV_SIZE 0x20000 /* 128k */
+#define CONFIG_ENV_ADDR 0x40000
+#define CONFIG_ENV_OFFSET 0x40000 /* env starts here */
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
+ "${x_bootcmd_ethernet}; setenv ethact egiga1; " \
+ "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
+ "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
+ "bootm 0x6400000;"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "x_bootcmd_ethernet=ping 192.168.2.1\0" \
+ "x_bootcmd_usb=usb start\0" \
+ "x_bootcmd_kernel=nand read.e 0x6400000 0x100000 0x400000\0" \
+ "x_bootargs=console=ttyS0,115200\0" \
+ "x_bootargs_root=ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+
+/*
+ * Other required configurations
+ */
+#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
+#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
+#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
+#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
+#define CONFIG_NR_DRAM_BANKS 4
+#define CONFIG_STACKSIZE 0x00100000 /* regular stack- 1M */
+#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
+#define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */
+#define CONFIG_SYS_MEMTEST_END 0x1fffffff /*(_512M -1) */
+#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+
+/*
+ * Ethernet Driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_NETCONSOLE /* include NetConsole support */
+#define CONFIG_NET_MULTI /* specify more that one ports available */
+#define CONFIG_MII /* expose smi ove miiphy interface */
+#define CONFIG_CMD_MII
+#define CONFIG_KIRKWOOD_EGIGA /* Enable kirkwood Gbe Controller Driver */
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
+#define CONFIG_KIRKWOOD_EGIGA_PORTS {1,1} /* enable both ports */
+#define CONFIG_PHY_BASE_ADR 0
+#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
+#define CONFIG_RESET_PHY_R /* use reset_phy() to init mv88e1121 PHY */
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * USB/EHCI
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI /* Enable EHCI USB support */
+#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+#define CONFIG_SUPPORT_VFAT
+#endif /* CONFIG_CMD_USB */
+
+#define CONFIG_SYS_ALT_MEMTEST
+
+#endif /* _CONFIG_GURUPLUG_H */
diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h
new file mode 100644
index 0000000..1da8602
--- /dev/null
+++ b/include/configs/imx27lite-common.h
@@ -0,0 +1,237 @@
+/*
+ * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
+ *
+ * based on:
+ * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMX27LITE_COMMON_CONFIG_H
+#define __IMX27LITE_COMMON_CONFIG_H
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_MX27
+#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */
+#define CONFIG_SYS_HZ 1000
+
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_CPUINFO
+
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_INITRD_TAG 1
+
+/*
+ * Lowlevel configuration
+ */
+#define SDRAM_ESDCFG_REGISTER_VAL(cas) \
+ (ESDCFG_TRC(10) | \
+ ESDCFG_TRCD(3) | \
+ ESDCFG_TCAS(cas) | \
+ ESDCFG_TRRD(1) | \
+ ESDCFG_TRAS(5) | \
+ ESDCFG_TWR | \
+ ESDCFG_TMRD(2) | \
+ ESDCFG_TRP(2) | \
+ ESDCFG_TXP(3))
+
+#define SDRAM_ESDCTL_REGISTER_VAL \
+ (ESDCTL_PRCT(0) | \
+ ESDCTL_BL | \
+ ESDCTL_PWDT(0) | \
+ ESDCTL_SREFR(3) | \
+ ESDCTL_DSIZ_32 | \
+ ESDCTL_COL10 | \
+ ESDCTL_ROW13 | \
+ ESDCTL_SDE)
+
+#define SDRAM_ALL_VAL 0xf00
+
+#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */
+#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000
+
+#define MPCTL0_VAL 0x1ef15d5
+
+#define SPCTL0_VAL 0x043a1c09
+
+#define CSCR_VAL 0x33f08107
+
+#define PCDR0_VAL 0x120470c3
+#define PCDR1_VAL 0x03030303
+#define PCCR0_VAL 0xffffffff
+#define PCCR1_VAL 0xfffffffc
+
+#define AIPI1_PSR0_VAL 0x20040304
+#define AIPI1_PSR1_VAL 0xdffbfcfb
+#define AIPI2_PSR0_VAL 0x07ffc200
+#define AIPI2_PSR1_VAL 0xffffffff
+
+/*
+ * Memory Info
+ */
+/* malloc() len */
+#define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024)
+/* reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE 128
+/* memtest start address */
+#define CONFIG_SYS_MEMTEST_START 0xA0000000
+#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */
+#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
+
+/*
+ * Serial Driver info
+ */
+#define CONFIG_MXC_UART
+#define CONFIG_SYS_MX27_UART1
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Flash & Environment
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+/* Use buffered writes (~10x faster) */
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
+/* Use hardware sector protection */
+#define CONFIG_SYS_FLASH_PROTECTION 1
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
+/* CS2 Base address */
+#define PHYS_FLASH_1 0xc0000000
+/* Flash Base for U-Boot */
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \
+ CONFIG_SYS_FLASH_SECT_SZ)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */
+#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
+/* Address and size of Redundant Environment Sector */
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+/*
+ * Ethernet
+ */
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_PHYADDR 0x1f
+#define CONFIG_MII
+#define CONFIG_NET_MULTI
+
+/*
+ * MTD
+ */
+#define CONFIG_FLASH_CFI_MTD
+#define CONFIG_MTD_DEVICE
+
+/*
+ * NAND
+ */
+#define CONFIG_NAND_MXC
+#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0xd8000000
+#define CONFIG_JFFS2_NAND
+#define CONFIG_MXC_NAND_HWECC
+#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXC_MMC
+#define CONFIG_DOS_PARTITION
+
+/*
+ * MTD partitions
+ */
+#define CONFIG_CMD_MTDPARTS
+
+/*
+ * U-Boot general configuration
+ */
+#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+/* Print buffer sz */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+
+/*
+ * U-Boot commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+
+#define CONFIG_BOOTDELAY 5
+
+#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define xstr(s) str(s)
+#define str(s) #s
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addtty=setenv bootargs ${bootargs}" \
+ " console=ttymxc0,${baudrate}\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "addmisc=setenv bootargs ${bootargs}\0" \
+ "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "kernel_addr_r=a0800000\0" \
+ "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
+ "rootpath=/opt/eldk-4.2-arm/arm\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
+ "run nfsargs addip addtty addmtd addmisc;" \
+ "bootm\0" \
+ "bootcmd=run net_nfs\0" \
+ "load=tftp ${loadaddr} ${u-boot}\0" \
+ "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize};cp.b ${fileaddr} " \
+ xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
+ "upd=run load update\0" \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+
+#endif /* __IMX27LITE_COMMON_CONFIG_H */
diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h
index ee749ec..72f6e80 100644
--- a/include/configs/imx27lite.h
+++ b/include/configs/imx27lite.h
@@ -20,158 +20,31 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+/* include common defines/options for all imx27lite related boards */
+#include "imx27lite-common.h"
/*
* SoC Configuration
*/
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
-#define CONFIG_MX27
#define CONFIG_IMX27LITE
-#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */
-#define CONFIG_SYS_HZ 1000
-
-#define CONFIG_DISPLAY_CPUINFO
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-/*
- * Lowlevel configuration
- */
-#define SDRAM_ESDCFG_REGISTER_VAL(cas) \
- (ESDCFG_TRC(10) | \
- ESDCFG_TRCD(3) | \
- ESDCFG_TCAS(cas) | \
- ESDCFG_TRRD(1) | \
- ESDCFG_TRAS(5) | \
- ESDCFG_TWR | \
- ESDCFG_TMRD(2) | \
- ESDCFG_TRP(2) | \
- ESDCFG_TXP(3))
-
-#define SDRAM_ESDCTL_REGISTER_VAL \
- (ESDCTL_PRCT(0) | \
- ESDCTL_BL | \
- ESDCTL_PWDT(0) | \
- ESDCTL_SREFR(3) | \
- ESDCTL_DSIZ_32 | \
- ESDCTL_COL10 | \
- ESDCTL_ROW13 | \
- ESDCTL_SDE)
-
-#define SDRAM_ALL_VAL 0xf00
-
-#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */
-#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000
-
-#define MPCTL0_VAL 0x1ef15d5
-
-#define SPCTL0_VAL 0x043a1c09
-
-#define CSCR_VAL 0x33f08107
-
-#define PCDR0_VAL 0x120470c3
-#define PCDR1_VAL 0x03030303
-#define PCCR0_VAL 0xffffffff
-#define PCCR1_VAL 0xfffffffc
-
-#define AIPI1_PSR0_VAL 0x20040304
-#define AIPI1_PSR1_VAL 0xdffbfcfb
-#define AIPI2_PSR0_VAL 0x07ffc200
-#define AIPI2_PSR1_VAL 0xffffffff
-
-/*
- * Memory Info
- */
-/* malloc() len */
-#define CONFIG_SYS_MALLOC_LEN (0x10000 + 512 * 1024)
-/* reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE 128
-/* memtest start address */
-#define CONFIG_SYS_MEMTEST_START 0xA0000000
-#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define CONFIG_STACKSIZE (256 * 1024) /* regular stack */
-#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */
-#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */
-
-/*
- * Serial Driver info
- */
-#define CONFIG_MXC_UART
-#define CONFIG_SYS_MX27_UART1
-#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_HOSTNAME imx27
+#define CONFIG_BOARDNAME "LogicPD imx27lite\n"
/*
* Flash & Environment
*/
-#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_CFI
-/* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
-/* Use hardware sector protection */
-#define CONFIG_SYS_FLASH_PROTECTION 1
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
#define CONFIG_SYS_FLASH_SECT_SZ 0x2000 /* 8KB sect size Intel Flash */
-/* end of flash */
#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x20000)
-/* CS2 Base address */
-#define PHYS_FLASH_1 0xc0000000
-/* Flash Base for U-Boot */
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-/* Flash size 2MB */
#define PHYS_FLASH_SIZE 0x200000
-#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \
- CONFIG_SYS_FLASH_SECT_SZ)
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */
#define CONFIG_ENV_SECT_SIZE 0x10000 /* Env sector Size */
-#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-/* Address and size of Redundant Environment Sector */
-#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-/*
- * Ethernet
- */
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_MXC_PHYADDR 0x1f
-#define CONFIG_MII
-#define CONFIG_NET_MULTI
-
-/*
- * MTD
- */
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_DEVICE
-
-/*
- * NAND
- */
-#define CONFIG_NAND_MXC
-#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000
-#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_NAND_BASE 0xd8000000
-#define CONFIG_JFFS2_NAND
-#define CONFIG_MXC_NAND_HWECC
-#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */
/*
* SD/MMC
*/
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_MXC_MMC
#define CONFIG_MXC_MCI_REGS_BASE 0x10014000
-#define CONFIG_DOS_PARTITION
/*
* MTD partitions
*/
-#define CONFIG_CMD_MTDPARTS
#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0"
#define MTDPARTS_DEFAULT \
"mtdparts=" \
@@ -186,69 +59,4 @@
"22m(rootfs)," \
"-(userfs)"
-/*
- * U-Boot general configuration
- */
-#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-/* Print buffer sz */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_LONGHELP
-
-/*
- * U-Boot commands
- */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-
-#define CONFIG_BOOTDELAY 5
-
-#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-#define xstr(s) str(s)
-#define str(s) #s
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "netdev=eth0\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "addip=setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
- ":${hostname}:${netdev}:off panic=1\0" \
- "addtty=setenv bootargs ${bootargs}" \
- " console=ttymxc0,${baudrate}\0" \
- "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addmisc=setenv bootargs ${bootargs}\0" \
- "u-boot=imx27/u-boot.bin\0" \
- "kernel_addr_r=a0800000\0" \
- "hostname=imx27\0" \
- "bootfile=imx27/uImage\0" \
- "rootpath=/opt/eldk-4.2-arm/arm\0" \
- "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \
- "run nfsargs addip addtty addmtd addmisc;" \
- "bootm\0" \
- "bootcmd=run net_nfs\0" \
- "load=tftp ${loadaddr} ${u-boot}\0" \
- "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \
- " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \
- " +${filesize};cp.b ${fileaddr} " \
- xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \
- "upd=run load update\0" \
-
#endif /* __CONFIG_H */
diff --git a/include/configs/magnesium.h b/include/configs/magnesium.h
new file mode 100644
index 0000000..4fb7744
--- /dev/null
+++ b/include/configs/magnesium.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright (C) 2010 Heiko Schocher <hs@denx.de>
+ *
+ * based on:
+ * Copyright (C) 2009 Ilya Yanok <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* include common defines/options for all imx27lite related boards */
+#include "imx27lite-common.h"
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_MAGNESIUM
+#define CONFIG_HOSTNAME magnesium
+#define CONFIG_BOARDNAME "Projectiondesign magnesium\n"
+
+/*
+ * Flash & Environment
+ */
+#define CONFIG_SYS_FLASH_SECT_SZ 0x8000 /* 64KB sect size */
+#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x40000)
+#define PHYS_FLASH_SIZE 0x800000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* Env sector Size */
+
+/*
+ * NAND
+ */
+#define CONFIG_SYS_NAND_LARGEPAGE
+
+/*
+ * SD/MMC
+ */
+#define CONFIG_MXC_MCI_REGS_BASE 0x10013000
+
+/*
+ * MTD partitions
+ */
+#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=" \
+ "physmap-flash.0:" \
+ "256k(U-Boot)," \
+ "7680k(user)," \
+ "128k(env1)," \
+ "128k(env2);" \
+ "mxc_nand.0:" \
+ "128k(IPL-SPL)," \
+ "4m(kernel)," \
+ "22m(rootfs)," \
+ "-(userfs)"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 903fe6d..3626df7 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -160,6 +160,9 @@
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
+#define CONFIG_SYS_DDR_CLKSEL 0
+#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100
+
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h
index 88f27ba..d2f4502 100644
--- a/include/configs/openrd_base.h
+++ b/include/configs/openrd_base.h
@@ -99,9 +99,8 @@
#define CONFIG_CMD_AUTOSCRIPT
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_NAND
#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
@@ -208,6 +207,7 @@
/*
* File system
*/
+#define CONFIG_CMD_FAT
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_RBTREE
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 47bb8c0..a0b00e9 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -28,8 +28,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_AT91_LEGACY
-
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261"
@@ -51,26 +49,26 @@
/* clocks */
/* CKGR_MOR - enable main osc. */
#define CONFIG_SYS_MOR_VAL \
- (AT91_PMC_MOSCEN | \
+ (AT91_PMC_MOR_MOSCEN | \
(255 << 8)) /* Main Oscillator Start-up Time */
#define CONFIG_SYS_PLLAR_VAL \
- (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
- AT91_PMC_OUT | \
+ (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \
+ AT91_PMC_PLLXR_OUT(3) | \
((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
/* PCK/2 = MCK Master Clock from PLLA */
#define CONFIG_SYS_MCKR1_VAL \
- (AT91_PMC_CSS_SLOW | \
- AT91_PMC_PRES_1 | \
- AT91SAM9_PMC_MDIV_2 | \
- AT91_PMC_PDIV_1)
+ (AT91_PMC_MCKR_CSS_SLOW | \
+ AT91_PMC_MCKR_PRES_1 | \
+ AT91_PMC_MCKR_MDIV_2 | \
+ AT91_PMC_MCKR_PLLADIV_1)
/* PCK/2 = MCK Master Clock from PLLA */
#define CONFIG_SYS_MCKR2_VAL \
- (AT91_PMC_CSS_PLLA | \
- AT91_PMC_PRES_1 | \
- AT91SAM9_PMC_MDIV_2 | \
- AT91_PMC_PDIV_1)
+ (AT91_PMC_MCKR_CSS_PLLA | \
+ AT91_PMC_MCKR_PRES_1 | \
+ AT91_PMC_MCKR_MDIV_2 | \
+ AT91_PMC_MCKR_PLLADIV_1)
/* define PDC[31:16] as DATA[31:16] */
#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000
@@ -79,7 +77,7 @@
/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
#define CONFIG_SYS_MATRIX_EBICSA_VAL \
- (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC)
+ (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A)
/* SDRAM */
/* SDRAMC_MR Mode register */
@@ -122,32 +120,32 @@
/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
#define CONFIG_SYS_SMC0_SETUP0_VAL \
- (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \
- AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
+ (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
+ AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
#define CONFIG_SYS_SMC0_PULSE0_VAL \
- (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \
- AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+ (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
+ AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
- (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+ (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
#define CONFIG_SYS_SMC0_MODE0_VAL \
- (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \
- AT91_SMC_DBW_16 | \
- AT91_SMC_TDFMODE | \
- AT91_SMC_TDF_(6))
+ (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
+ AT91_SMC_MODE_DBW_16 | \
+ AT91_SMC_MODE_TDF | \
+ AT91_SMC_MODE_TDF_CYCLE(6))
/* user reset enable */
#define CONFIG_SYS_RSTC_RMR_VAL \
(AT91_RSTC_KEY | \
- AT91_RSTC_PROCRST | \
- AT91_RSTC_RSTTYP_WAKEUP | \
- AT91_RSTC_RSTTYP_WATCHDOG)
+ AT91_RSTC_CR_PROCRST | \
+ AT91_RSTC_MR_ERSTL(1) | \
+ AT91_RSTC_MR_ERSTL(2))
/* Disable Watchdog */
#define CONFIG_SYS_WDTC_WDMR_VAL \
- (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \
- AT91_WDT_WDV | \
- AT91_WDT_WDDIS | \
- AT91_WDT_WDD)
+ (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
+ AT91_WDT_MR_WDV(0xfff) | \
+ AT91_WDT_MR_WDDIS | \
+ AT91_WDT_MR_WDD(0xfff))
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
@@ -180,9 +178,9 @@
/* LED */
#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIN_PC12
-#define CONFIG_GREEN_LED AT91_PIN_PC13
-#define CONFIG_YELLOW_LED AT91_PIN_PC15
+#define CONFIG_RED_LED AT91_PIO_PORTC, 12
+#define CONFIG_GREEN_LED AT91_PIO_PORTC, 13
+#define CONFIG_YELLOW_LED AT91_PIO_PORTC, 15
#define CONFIG_BOOTDELAY 3
@@ -200,7 +198,6 @@
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_IMLS
@@ -236,8 +233,8 @@
#define CONFIG_SYS_NAND_MASK_ALE (1 << 22)
/* our CLE is AD21 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 21)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA16
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTA, 16
/* NOR flash */
#define CONFIG_SYS_FLASH_CFI 1
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 807dba8..9735e6a 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -28,8 +28,6 @@
#ifndef __CONFIG_H
#define __CONFIG_H
-#define CONFIG_AT91_LEGACY
-
/* ARM asynchronous clock */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
@@ -49,41 +47,37 @@
/* clocks */
#define CONFIG_SYS_MOR_VAL \
- (AT91_PMC_MOSCEN | \
+ (AT91_PMC_MOR_MOSCEN | \
(255 << 8)) /* Main Oscillator Start-up Time */
#define CONFIG_SYS_PLLAR_VAL \
- (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \
- AT91_PMC_OUT | \
- AT91_PMC_PLLCOUNT | /* PLL Counter */ \
+ (AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \
+ AT91_PMC_PLLXR_OUT(3) | \
+ AT91_PMC_PLLXR_PLLCOUNT(0x3f) | /* PLL Counter */\
(2 << 28) | /* PLL Clock Frequency Range */ \
((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))
#if (MAIN_PLL_DIV == 2)
/* PCK/2 = MCK Master Clock from PLLA */
#define CONFIG_SYS_MCKR1_VAL \
- (AT91_PMC_CSS_SLOW | \
- AT91_PMC_PRES_1 | \
- AT91SAM9_PMC_MDIV_2 | \
- AT91_PMC_PDIV_1)
+ (AT91_PMC_MCKR_CSS_SLOW | \
+ AT91_PMC_MCKR_PRES_1 | \
+ AT91_PMC_MCKR_MDIV_2)
/* PCK/2 = MCK Master Clock from PLLA */
#define CONFIG_SYS_MCKR2_VAL \
- (AT91_PMC_CSS_PLLA | \
- AT91_PMC_PRES_1 | \
- AT91SAM9_PMC_MDIV_2 | \
- AT91_PMC_PDIV_1)
+ (AT91_PMC_MCKR_CSS_PLLA | \
+ AT91_PMC_MCKR_PRES_1 | \
+ AT91_PMC_MCKR_MDIV_2)
#else
/* PCK/4 = MCK Master Clock from PLLA */
#define CONFIG_SYS_MCKR1_VAL \
- (AT91_PMC_CSS_SLOW | \
- AT91_PMC_PRES_1 | \
- AT91RM9200_PMC_MDIV_3 | \
- AT91_PMC_PDIV_1)
+ (AT91_PMC_MCKR_CSS_SLOW | \
+ AT91_PMC_MCKR_PRES_1 | \
+ AT91_PMC_MCKR_MDIV_4)
/* PCK/4 = MCK Master Clock from PLLA */
#define CONFIG_SYS_MCKR2_VAL \
- (AT91_PMC_CSS_PLLA | \
- AT91_PMC_PRES_1 | \
- AT91RM9200_PMC_MDIV_3 | \
- AT91_PMC_PDIV_1)
+ (AT91_PMC_MCKR_CSS_PLLA | \
+ AT91_PMC_MCKR_PRES_1 | \
+ AT91_PMC_MCKR_MDIV_4)
#endif
/* define PDC[31:16] as DATA[31:16] */
#define CONFIG_SYS_PIOD_PDR_VAL1 0xFFFF0000
@@ -91,8 +85,8 @@
#define CONFIG_SYS_PIOD_PPUDR_VAL 0xFFFF0000
/* EBI0_CSA, CS1 SDRAM, CS3 NAND Flash, 3.3V memories */
#define CONFIG_SYS_MATRIX_EBI0CSA_VAL \
- (AT91_MATRIX_EBI0_DBPUC | AT91_MATRIX_EBI0_VDDIOMSEL_3_3V | \
- AT91_MATRIX_EBI0_CS1A_SDRAMC)
+ (AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_VDDIOMSEL_3_3V | \
+ AT91_MATRIX_CSA_EBI_CS1A)
/* SDRAM */
/* SDRAMC_MR Mode register */
@@ -135,32 +129,32 @@
/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
#define CONFIG_SYS_SMC0_SETUP0_VAL \
- (AT91_SMC_NWESETUP_(10) | AT91_SMC_NCS_WRSETUP_(10) | \
- AT91_SMC_NRDSETUP_(10) | AT91_SMC_NCS_RDSETUP_(10))
+ (AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) | \
+ AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
#define CONFIG_SYS_SMC0_PULSE0_VAL \
- (AT91_SMC_NWEPULSE_(11) | AT91_SMC_NCS_WRPULSE_(11) | \
- AT91_SMC_NRDPULSE_(11) | AT91_SMC_NCS_RDPULSE_(11))
+ (AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) | \
+ AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
#define CONFIG_SYS_SMC0_CYCLE0_VAL \
- (AT91_SMC_NWECYCLE_(22) | AT91_SMC_NRDCYCLE_(22))
+ (AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
#define CONFIG_SYS_SMC0_MODE0_VAL \
- (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \
- AT91_SMC_DBW_16 | \
- AT91_SMC_TDFMODE | \
- AT91_SMC_TDF_(6))
+ (AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE | \
+ AT91_SMC_MODE_DBW_16 | \
+ AT91_SMC_MODE_TDF | \
+ AT91_SMC_MODE_TDF_CYCLE(6))
/* user reset enable */
#define CONFIG_SYS_RSTC_RMR_VAL \
(AT91_RSTC_KEY | \
- AT91_RSTC_PROCRST | \
- AT91_RSTC_RSTTYP_WAKEUP | \
- AT91_RSTC_RSTTYP_WATCHDOG)
+ AT91_RSTC_CR_PROCRST | \
+ AT91_RSTC_MR_ERSTL(1) | \
+ AT91_RSTC_MR_ERSTL(2))
/* Disable Watchdog */
#define CONFIG_SYS_WDTC_WDMR_VAL \
- (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \
- AT91_WDT_WDV | \
- AT91_WDT_WDDIS | \
- AT91_WDT_WDD)
+ (AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT | \
+ AT91_WDT_MR_WDV(0xfff) | \
+ AT91_WDT_MR_WDDIS | \
+ AT91_WDT_MR_WDD(0xfff))
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
@@ -196,8 +190,8 @@
/* LED */
#define CONFIG_AT91_LED
-#define CONFIG_RED_LED AT91_PIN_PB7 /* this is the power led */
-#define CONFIG_GREEN_LED AT91_PIN_PB8 /* this is the user1 led */
+#define CONFIG_RED_LED AT91_PIO_PORTB, 7 /* this is the power led */
+#define CONFIG_GREEN_LED AT91_PIO_PORTB, 8 /* this is the user1 led */
#define CONFIG_BOOTDELAY 3
@@ -215,7 +209,6 @@
#include <config_cmd_default.h>
#undef CONFIG_CMD_BDI
#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_AUTOSCRIPT
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_LOADS
#undef CONFIG_CMD_IMLS
@@ -259,8 +252,8 @@
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
-#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15
-#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30
+#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 15
+#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTB, 30
#endif
@@ -274,6 +267,11 @@
/* PSRAM */
#define PHYS_PSRAM 0x70000000
#define PHYS_PSRAM_SIZE 0x00400000 /* 4MB */
+/* Slave EBI1, PSRAM connected */
+#define CONFIG_PSRAM_SCFG (AT91_MATRIX_SCFG_ARBT_FIXED_PRIORITY | \
+ AT91_MATRIX_SCFG_FIXED_DEFMSTR(5) | \
+ AT91_MATRIX_SCFG_DEFMSTR_TYPE_FIXED | \
+ AT91_MATRIX_SCFG_SLOT_CYCLE(255))
/* Ethernet */
#define CONFIG_MACB 1
diff --git a/include/configs/qong.h b/include/configs/qong.h
index 61acb04..1d63b33 100644
--- a/include/configs/qong.h
+++ b/include/configs/qong.h
@@ -41,7 +41,7 @@
/*
* Size of malloc() pool
*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 1024 * 1024)
/* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_SIZE 128
@@ -52,6 +52,8 @@
#define CONFIG_MXC_UART 1
#define CONFIG_SYS_MX31_UART1 1
+#define CONFIG_MX31_GPIO
+
/* FPGA */
#define CONFIG_QONG_FPGA 1
#define CONFIG_FPGA_BASE (CS1_BASE)
@@ -95,7 +97,7 @@
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
-#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NAND
/*
* You can compile in a MAC address and your custom net settings by using
@@ -192,6 +194,30 @@
#define PHYS_SDRAM_1 CSD0_BASE
#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */
+/*
+ * NAND driver
+ */
+
+#ifndef __ASSEMBLY__
+extern void qong_nand_plat_init(void *chip);
+extern int qong_nand_rdy(void *chip);
+#endif
+#define CONFIG_NAND_PLAT
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE CS3_BASE
+#define NAND_PLAT_INIT() qong_nand_plat_init(nand)
+
+#define QONG_NAND_CLE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 24))
+#define QONG_NAND_ALE(chip) ((unsigned long)(chip)->IO_ADDR_W | (1 << 23))
+#define QONG_NAND_WRITE(addr, cmd) \
+ do { \
+ __REG8(addr) = cmd; \
+ } while (0)
+
+#define NAND_PLAT_WRITE_CMD(chip, cmd) QONG_NAND_WRITE(QONG_NAND_CLE(chip), cmd)
+#define NAND_PLAT_WRITE_ADR(chip, cmd) QONG_NAND_WRITE(QONG_NAND_ALE(chip), cmd)
+#define NAND_PLAT_DEV_READY(chip) (qong_nand_rdy(chip))
+
/*-----------------------------------------------------------------------
* FLASH and environment organization
*/
@@ -206,7 +232,7 @@
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
/* Address and size of Redundant Environment Sector */
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
@@ -225,9 +251,15 @@
#define CONFIG_SYS_FLASH_PROTECTION 1
/*
- * JFFS2 partitions
+ * Filesystem
*/
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_PARTITIONS
#define CONFIG_CMD_MTDPARTS
+#define CONFIG_LZO
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define CONFIG_FLASH_CFI_MTD
#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index fc401a8..e9edc44 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -85,6 +85,7 @@
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buff */
+
/*
* Commands configuration
*/
@@ -93,7 +94,7 @@
#define CONFIG_CMD_AUTOSCRIPT
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
+#define CONFIG_CMD_MII
#define CONFIG_CMD_NAND
#define CONFIG_CMD_PING
#define CONFIG_CMD_USB
@@ -123,8 +124,8 @@
* it has to be rounded to sector size
*/
#define CONFIG_ENV_SIZE 0x20000 /* 128k */
-#define CONFIG_ENV_ADDR 0x40000
-#define CONFIG_ENV_OFFSET 0x40000 /* env starts here */
+#define CONFIG_ENV_ADDR 0x60000
+#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
/*
* Default environment variables
@@ -145,14 +146,16 @@
/*
* Size of malloc() pool
*/
-#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1 MiB for malloc() */
/* size in bytes reserved for initial data */
#define CONFIG_SYS_GBL_DATA_SIZE 128
/*
* Other required minimal configurations
*/
-#define CONFIG_CONSOLE_INFO_QUIET /* some code reduction */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
#define CONFIG_ARCH_MISC_INIT /* call arch_misc_init() */
#define CONFIG_DISPLAY_CPUINFO /* Display cpu info */
@@ -192,4 +195,18 @@
#define CONFIG_SUPPORT_VFAT
#endif /* CONFIG_CMD_USB */
+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_LZO
+
#endif /* _CONFIG_SHEEVAPLUG_H */
diff --git a/include/serial.h b/include/serial.h
index 6423fba..111edbe 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -52,10 +52,10 @@ extern struct serial_device s3c24xx_serial2_device;
#endif
#if defined(CONFIG_S5PC1XX)
-extern struct serial_device s5pc1xx_serial0_device;
-extern struct serial_device s5pc1xx_serial1_device;
-extern struct serial_device s5pc1xx_serial2_device;
-extern struct serial_device s5pc1xx_serial3_device;
+extern struct serial_device s5p_serial0_device;
+extern struct serial_device s5p_serial1_device;
+extern struct serial_device s5p_serial2_device;
+extern struct serial_device s5p_serial3_device;
#endif
#if defined(CONFIG_OMAP3_ZOOM2)
diff --git a/tools/imximage.c b/tools/imximage.c
index df2d8c4..39f89c2 100644
--- a/tools/imximage.c
+++ b/tools/imximage.c
@@ -36,7 +36,7 @@
* Supported commands for configuration file
*/
static table_entry_t imximage_cmds[] = {
- {CMD_BOOT_FROM, "BOOT_FROM", "boot comand", },
+ {CMD_BOOT_FROM, "BOOT_FROM", "boot command", },
{CMD_DATA, "DATA", "Reg Write Data", },
{-1, "", "", },
};