summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2009-08-28 00:17:41 +0200
committerWolfgang Denk <wd@denx.de>2009-08-28 00:17:41 +0200
commit5928da0193d31f52f4a5b9f6ed3d3f0390ffd2c1 (patch)
treecbd840fb27b43725aa1475fea7a5418fc2a37186
parentce3277a6f2c082f39596d3d3d88dd0a5bc91439d (diff)
parent77b351cd0f20483eefa09bebebb3e0cbf5555b2c (diff)
downloadu-boot-imx-5928da0193d31f52f4a5b9f6ed3d3f0390ffd2c1.zip
u-boot-imx-5928da0193d31f52f4a5b9f6ed3d3f0390ffd2c1.tar.gz
u-boot-imx-5928da0193d31f52f4a5b9f6ed3d3f0390ffd2c1.tar.bz2
Merge branch 'next' of git://git.denx.de/u-boot-nand-flash into next
-rw-r--r--drivers/mtd/nand/Makefile3
-rw-r--r--drivers/mtd/nand/davinci_nand.c284
-rw-r--r--drivers/mtd/nand/fsl_elbc_nand.c2
-rw-r--r--drivers/mtd/nand/kb9202_nand.c150
-rw-r--r--drivers/mtd/nand/kmeter1_nand.c135
-rw-r--r--drivers/mtd/nand/mxc_nand.c880
-rw-r--r--drivers/mtd/nand/nand_base.c75
-rw-r--r--include/asm-arm/arch-davinci/emif_defs.h10
-rw-r--r--include/configs/kmeter1.h6
-rw-r--r--include/linux/mtd/nand.h5
10 files changed, 1538 insertions, 12 deletions
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 89ccec2..02449ee 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -38,8 +38,11 @@ COBJS-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o
COBJS-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
COBJS-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
+COBJS-$(CONFIG_NAND_KB9202) += kb9202_nand.o
COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
+COBJS-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
+COBJS-$(CONFIG_NAND_MXC) += mxc_nand.o
COBJS-$(CONFIG_NAND_NDFC) += ndfc.o
COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o
COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
index 7837a8e..37d8b73 100644
--- a/drivers/mtd/nand/davinci_nand.c
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -47,6 +47,16 @@
#include <asm/arch/nand_defs.h>
#include <asm/arch/emif_defs.h>
+/* Definitions for 4-bit hardware ECC */
+#define NAND_TIMEOUT 10240
+#define NAND_ECC_BUSY 0xC
+#define NAND_4BITECC_MASK 0x03FF03FF
+#define EMIF_NANDFSR_ECC_STATE_MASK 0x00000F00
+#define ECC_STATE_NO_ERR 0x0
+#define ECC_STATE_TOO_MANY_ERRS 0x1
+#define ECC_STATE_ERR_CORR_COMP_P 0x2
+#define ECC_STATE_ERR_CORR_COMP_N 0x3
+
static emif_registers *const emif_regs = (void *) DAVINCI_ASYNC_EMIF_CNTRL_BASE;
static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
@@ -170,6 +180,268 @@ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char *
}
#endif /* CONFIG_SYS_NAND_HW_ECC */
+#ifdef CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+static struct nand_ecclayout nand_davinci_4bit_layout_oobfirst = {
+/*
+ * TI uses a different layout for 4K page deviecs. Since the
+ * eccpos filed can hold only a limited number of entries, adding
+ * support for 4K page will result in compilation warnings
+ * 4K Support will be added later
+ */
+#ifdef CONFIG_SYS_NAND_PAGE_2K
+ .eccbytes = 40,
+ .eccpos = {
+ 24, 25, 26, 27, 28,
+ 29, 30, 31, 32, 33, 34, 35, 36, 37, 38,
+ 39, 40, 41, 42, 43, 44, 45, 46, 47, 48,
+ 49, 50, 51, 52, 53, 54, 55, 56, 57, 58,
+ 59, 60, 61, 62, 63,
+ },
+ .oobfree = {
+ {.offset = 2, .length = 22, },
+ },
+#endif
+};
+#endif
+
+static void nand_davinci_4bit_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ u32 val;
+
+ switch (mode) {
+ case NAND_ECC_WRITE:
+ case NAND_ECC_READ:
+ /*
+ * Start a new ECC calculation for reading or writing 512 bytes
+ * of data.
+ */
+ val = (emif_regs->NANDFCR & ~(3 << 4)) | (1 << 12);
+ emif_regs->NANDFCR = val;
+ break;
+ case NAND_ECC_READSYN:
+ val = emif_regs->NAND4BITECC1;
+ break;
+ default:
+ break;
+ }
+}
+
+static u32 nand_davinci_4bit_readecc(struct mtd_info *mtd, unsigned int ecc[4])
+{
+ ecc[0] = emif_regs->NAND4BITECC1 & NAND_4BITECC_MASK;
+ ecc[1] = emif_regs->NAND4BITECC2 & NAND_4BITECC_MASK;
+ ecc[2] = emif_regs->NAND4BITECC3 & NAND_4BITECC_MASK;
+ ecc[3] = emif_regs->NAND4BITECC4 & NAND_4BITECC_MASK;
+
+ return 0;
+}
+
+static int nand_davinci_4bit_calculate_ecc(struct mtd_info *mtd,
+ const uint8_t *dat,
+ uint8_t *ecc_code)
+{
+ unsigned int hw_4ecc[4] = { 0, 0, 0, 0 };
+ unsigned int const1 = 0, const2 = 0;
+ unsigned char count1 = 0;
+
+ nand_davinci_4bit_readecc(mtd, hw_4ecc);
+
+ /*Convert 10 bit ecc value to 8 bit */
+ for (count1 = 0; count1 < 2; count1++) {
+ const2 = count1 * 5;
+ const1 = count1 * 2;
+
+ /* Take first 8 bits from val1 (count1=0) or val5 (count1=1) */
+ ecc_code[const2] = hw_4ecc[const1] & 0xFF;
+
+ /*
+ * Take 2 bits as LSB bits from val1 (count1=0) or val5
+ * (count1=1) and 6 bits from val2 (count1=0) or
+ * val5 (count1=1)
+ */
+ ecc_code[const2 + 1] =
+ ((hw_4ecc[const1] >> 8) & 0x3) | ((hw_4ecc[const1] >> 14) &
+ 0xFC);
+
+ /*
+ * Take 4 bits from val2 (count1=0) or val5 (count1=1) and
+ * 4 bits from val3 (count1=0) or val6 (count1=1)
+ */
+ ecc_code[const2 + 2] =
+ ((hw_4ecc[const1] >> 22) & 0xF) |
+ ((hw_4ecc[const1 + 1] << 4) & 0xF0);
+
+ /*
+ * Take 6 bits from val3(count1=0) or val6 (count1=1) and
+ * 2 bits from val4 (count1=0) or val7 (count1=1)
+ */
+ ecc_code[const2 + 3] =
+ ((hw_4ecc[const1 + 1] >> 4) & 0x3F) |
+ ((hw_4ecc[const1 + 1] >> 10) & 0xC0);
+
+ /* Take 8 bits from val4 (count1=0) or val7 (count1=1) */
+ ecc_code[const2 + 4] = (hw_4ecc[const1 + 1] >> 18) & 0xFF;
+ }
+ return 0;
+}
+
+
+static int nand_davinci_4bit_correct_data(struct mtd_info *mtd, uint8_t *dat,
+ uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned short ecc_10bit[8] = { 0, 0, 0, 0, 0, 0, 0, 0 };
+ int i;
+ unsigned int hw_4ecc[4] = { 0, 0, 0, 0 }, iserror = 0;
+ unsigned short *pspare = NULL, *pspare1 = NULL;
+ unsigned int numerrors, erroraddress, errorvalue;
+ u32 val;
+
+ /*
+ * Check for an ECC where all bytes are 0xFF. If this is the case, we
+ * will assume we are looking at an erased page and we should ignore
+ * the ECC.
+ */
+ for (i = 0; i < 10; i++) {
+ if (read_ecc[i] != 0xFF)
+ break;
+ }
+ if (i == 10)
+ return 0;
+
+ /* Convert 8 bit in to 10 bit */
+ pspare = (unsigned short *)&read_ecc[2];
+ pspare1 = (unsigned short *)&read_ecc[0];
+
+ /* Take 10 bits from 0th and 1st bytes */
+ ecc_10bit[0] = (*pspare1) & 0x3FF;
+
+ /* Take 6 bits from 1st byte and 4 bits from 2nd byte */
+ ecc_10bit[1] = (((*pspare1) >> 10) & 0x3F)
+ | (((pspare[0]) << 6) & 0x3C0);
+
+ /* Take 4 bits form 2nd bytes and 6 bits from 3rd bytes */
+ ecc_10bit[2] = ((pspare[0]) >> 4) & 0x3FF;
+
+ /*Take 2 bits from 3rd byte and 8 bits from 4th byte */
+ ecc_10bit[3] = (((pspare[0]) >> 14) & 0x3)
+ | ((((pspare[1])) << 2) & 0x3FC);
+
+ /* Take 8 bits from 5th byte and 2 bits from 6th byte */
+ ecc_10bit[4] = ((pspare[1]) >> 8)
+ | ((((pspare[2])) << 8) & 0x300);
+
+ /* Take 6 bits from 6th byte and 4 bits from 7th byte */
+ ecc_10bit[5] = (pspare[2] >> 2) & 0x3FF;
+
+ /* Take 4 bits from 7th byte and 6 bits from 8th byte */
+ ecc_10bit[6] = (((pspare[2]) >> 12) & 0xF)
+ | ((((pspare[3])) << 4) & 0x3F0);
+
+ /*Take 2 bits from 8th byte and 8 bits from 9th byte */
+ ecc_10bit[7] = ((pspare[3]) >> 6) & 0x3FF;
+
+ /*
+ * Write the parity values in the NAND Flash 4-bit ECC Load register.
+ * Write each parity value one at a time starting from 4bit_ecc_val8
+ * to 4bit_ecc_val1.
+ */
+ for (i = 7; i >= 0; i--)
+ emif_regs->NAND4BITECCLOAD = ecc_10bit[i];
+
+ /*
+ * Perform a dummy read to the EMIF Revision Code and Status register.
+ * This is required to ensure time for syndrome calculation after
+ * writing the ECC values in previous step.
+ */
+
+ val = emif_regs->NANDFSR;
+
+ /*
+ * Read the syndrome from the NAND Flash 4-Bit ECC 1-4 registers.
+ * A syndrome value of 0 means no bit errors. If the syndrome is
+ * non-zero then go further otherwise return.
+ */
+ nand_davinci_4bit_readecc(mtd, hw_4ecc);
+
+ if (hw_4ecc[0] == ECC_STATE_NO_ERR && hw_4ecc[1] == ECC_STATE_NO_ERR &&
+ hw_4ecc[2] == ECC_STATE_NO_ERR && hw_4ecc[3] == ECC_STATE_NO_ERR)
+ return 0;
+
+ /*
+ * Clear any previous address calculation by doing a dummy read of an
+ * error address register.
+ */
+ val = emif_regs->NANDERRADD1;
+
+ /*
+ * Set the addr_calc_st bit(bit no 13) in the NAND Flash Control
+ * register to 1.
+ */
+ emif_regs->NANDFCR |= 1 << 13;
+
+ /*
+ * Wait for the corr_state field (bits 8 to 11)in the
+ * NAND Flash Status register to be equal to 0x0, 0x1, 0x2, or 0x3.
+ */
+ i = NAND_TIMEOUT;
+ do {
+ val = emif_regs->NANDFSR;
+ val &= 0xc00;
+ i--;
+ } while ((i > 0) && val);
+
+ iserror = emif_regs->NANDFSR;
+ iserror &= EMIF_NANDFSR_ECC_STATE_MASK;
+ iserror = iserror >> 8;
+
+ /*
+ * ECC_STATE_TOO_MANY_ERRS (0x1) means errors cannot be
+ * corrected (five or more errors). The number of errors
+ * calculated (err_num field) differs from the number of errors
+ * searched. ECC_STATE_ERR_CORR_COMP_P (0x2) means error
+ * correction complete (errors on bit 8 or 9).
+ * ECC_STATE_ERR_CORR_COMP_N (0x3) means error correction
+ * complete (error exists).
+ */
+
+ if (iserror == ECC_STATE_NO_ERR) {
+ val = emif_regs->NANDERRVAL1;
+ return 0;
+ } else if (iserror == ECC_STATE_TOO_MANY_ERRS) {
+ val = emif_regs->NANDERRVAL1;
+ return -1;
+ }
+
+ numerrors = ((emif_regs->NANDFSR >> 16) & 0x3) + 1;
+
+ /* Read the error address, error value and correct */
+ for (i = 0; i < numerrors; i++) {
+ if (i > 1) {
+ erroraddress =
+ ((emif_regs->NANDERRADD2 >>
+ (16 * (i & 1))) & 0x3FF);
+ erroraddress = ((512 + 7) - erroraddress);
+ errorvalue =
+ ((emif_regs->NANDERRVAL2 >>
+ (16 * (i & 1))) & 0xFF);
+ } else {
+ erroraddress =
+ ((emif_regs->NANDERRADD1 >>
+ (16 * (i & 1))) & 0x3FF);
+ erroraddress = ((512 + 7) - erroraddress);
+ errorvalue =
+ ((emif_regs->NANDERRVAL1 >>
+ (16 * (i & 1))) & 0xFF);
+ }
+ /* xor the corrupt data with error value */
+ if (erroraddress < 512)
+ dat[erroraddress] ^= errorvalue;
+ }
+
+ return numerrors;
+}
+
static int nand_davinci_dev_ready(struct mtd_info *mtd)
{
return emif_regs->NANDFSR & 0x1;
@@ -215,7 +487,7 @@ void davinci_nand_init(struct nand_chip *nand)
{
nand->chip_delay = 0;
#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT
- nand->options = NAND_USE_FLASH_BBT;
+ nand->options |= NAND_USE_FLASH_BBT;
#endif
#ifdef CONFIG_SYS_NAND_HW_ECC
nand->ecc.mode = NAND_ECC_HW;
@@ -227,7 +499,15 @@ void davinci_nand_init(struct nand_chip *nand)
#else
nand->ecc.mode = NAND_ECC_SOFT;
#endif /* CONFIG_SYS_NAND_HW_ECC */
-
+#ifdef CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+ nand->ecc.mode = NAND_ECC_HW_OOB_FIRST;
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 10;
+ nand->ecc.calculate = nand_davinci_4bit_calculate_ecc;
+ nand->ecc.correct = nand_davinci_4bit_correct_data;
+ nand->ecc.hwctl = nand_davinci_4bit_enable_hwecc;
+ nand->ecc.layout = &nand_davinci_4bit_layout_oobfirst;
+#endif
/* Set address of hardware control function */
nand->cmd_ctrl = nand_davinci_hwcontrol;
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
index 77a33c0..50cb4aa 100644
--- a/drivers/mtd/nand/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -662,7 +662,7 @@ static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
static int fsl_elbc_read_page(struct mtd_info *mtd,
struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
fsl_elbc_read_buf(mtd, buf, mtd->writesize);
fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
diff --git a/drivers/mtd/nand/kb9202_nand.c b/drivers/mtd/nand/kb9202_nand.c
new file mode 100644
index 0000000..b8f46fa
--- /dev/null
+++ b/drivers/mtd/nand/kb9202_nand.c
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2006
+ * KwikByte <kb9200_dev@kwikbyte.com>
+ *
+ * (C) Copyright 2009
+ * Matthias Kaehlcke <matthias@kaehlcke.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/AT91RM9200.h>
+#include <asm/arch/hardware.h>
+
+#include <nand.h>
+
+/*
+ * hardware specific access to control-lines
+ */
+
+#define MASK_ALE (1 << 22) /* our ALE is A22 */
+#define MASK_CLE (1 << 21) /* our CLE is A21 */
+
+#define KB9202_NAND_NCE (1 << 28) /* EN* on D28 */
+#define KB9202_NAND_BUSY (1 << 29) /* RB* on D29 */
+
+#define KB9202_SMC2_NWS (1 << 2)
+#define KB9202_SMC2_TDF (1 << 8)
+#define KB9202_SMC2_RWSETUP (1 << 24)
+#define KB9202_SMC2_RWHOLD (1 << 29)
+
+/*
+ * Board-specific function to access device control signals
+ */
+static void kb9202_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+ /* clear ALE and CLE bits */
+ IO_ADDR_W &= ~(MASK_ALE | MASK_CLE);
+
+ if (ctrl & NAND_CLE)
+ IO_ADDR_W |= MASK_CLE;
+
+ if (ctrl & NAND_ALE)
+ IO_ADDR_W |= MASK_ALE;
+
+ this->IO_ADDR_W = (void *) IO_ADDR_W;
+
+ if (ctrl & NAND_NCE)
+ writel(KB9202_NAND_NCE, AT91C_PIOC_CODR);
+ else
+ writel(KB9202_NAND_NCE, AT91C_PIOC_SODR);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, this->IO_ADDR_W);
+}
+
+
+/*
+ * Board-specific function to access the device ready signal.
+ */
+static int kb9202_nand_ready(struct mtd_info *mtd)
+{
+ return readl(AT91C_PIOC_PDSR) & KB9202_NAND_BUSY;
+}
+
+
+/*
+ * Board-specific NAND init. Copied from include/linux/mtd/nand.h for reference.
+ *
+ * struct nand_chip - NAND Private Flash Chip Data
+ * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device
+ * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device
+ * @hwcontrol: [BOARDSPECIFIC] hardwarespecific function for accesing control-lines
+ * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line
+ * If set to NULL no access to ready/busy is available and the ready/busy information
+ * is read from the chip status register
+ * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only
+ * be provided if a hardware ECC is available
+ * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines
+ * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
+ * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about
+ * special functionality. See the defines for further explanation
+*/
+/*
+ * This routine initializes controller and GPIOs.
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+ unsigned int value;
+
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->cmd_ctrl = kb9202_nand_hwcontrol;
+ nand->dev_ready = kb9202_nand_ready;
+
+ /* in case running outside of bootloader */
+ writel(1 << AT91C_ID_PIOC, AT91C_PMC_PCER);
+
+ /* setup nand flash access (allow ample margin) */
+ /* 4 wait states, 1 setup, 1 hold, 1 float for 8-bit device */
+ writel(AT91C_SMC2_WSEN | KB9202_SMC2_NWS | KB9202_SMC2_TDF |
+ AT91C_SMC2_DBW_8 | KB9202_SMC2_RWSETUP | KB9202_SMC2_RWHOLD,
+ AT91C_SMC_CSR3);
+
+ /* enable internal NAND controller */
+ value = readl(AT91C_EBI_CSA);
+ value |= AT91C_EBI_CS3A_SMC_SmartMedia;
+ writel(value, AT91C_EBI_CSA);
+
+ /* enable SMOE/SMWE */
+ writel(AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE, AT91C_PIOC_ASR);
+ writel(AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE, AT91C_PIOC_PDR);
+ writel(AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE, AT91C_PIOC_OER);
+
+ /* set NCE to high */
+ writel(KB9202_NAND_NCE, AT91C_PIOC_SODR);
+
+ /* disable output on pin connected to the busy line of the NAND */
+ writel(KB9202_NAND_BUSY, AT91C_PIOC_ODR);
+
+ /* enable the PIO to control NCE and BUSY */
+ writel(KB9202_NAND_NCE | KB9202_NAND_BUSY, AT91C_PIOC_PER);
+
+ /* enable output for NCE */
+ writel(KB9202_NAND_NCE, AT91C_PIOC_OER);
+
+ return (0);
+}
diff --git a/drivers/mtd/nand/kmeter1_nand.c b/drivers/mtd/nand/kmeter1_nand.c
new file mode 100644
index 0000000..e8e5b7b
--- /dev/null
+++ b/drivers/mtd/nand/kmeter1_nand.c
@@ -0,0 +1,135 @@
+/*
+ * (C) Copyright 2009
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <asm/io.h>
+
+#define CONFIG_NAND_MODE_REG (void *)(CONFIG_SYS_NAND_BASE + 0x20000)
+#define CONFIG_NAND_DATA_REG (void *)(CONFIG_SYS_NAND_BASE + 0x30000)
+
+#define read_mode() in_8(CONFIG_NAND_MODE_REG)
+#define write_mode(val) out_8(CONFIG_NAND_MODE_REG, val)
+#define read_data() in_8(CONFIG_NAND_DATA_REG)
+#define write_data(val) out_8(CONFIG_NAND_DATA_REG, val)
+
+#define KPN_RDY2 (1 << 7)
+#define KPN_RDY1 (1 << 6)
+#define KPN_WPN (1 << 4)
+#define KPN_CE2N (1 << 3)
+#define KPN_CE1N (1 << 2)
+#define KPN_ALE (1 << 1)
+#define KPN_CLE (1 << 0)
+
+#define KPN_DEFAULT_CHIP_DELAY 50
+
+static int kpn_chip_ready(void)
+{
+ if (read_mode() & KPN_RDY1)
+ return 1;
+
+ return 0;
+}
+
+static void kpn_wait_rdy(void)
+{
+ int cnt = 1000000;
+
+ while (--cnt && !kpn_chip_ready())
+ udelay(1);
+
+ if (!cnt)
+ printf ("timeout while waiting for RDY\n");
+}
+
+static void kpn_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ u8 reg_val = read_mode();
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ reg_val = reg_val & ~(KPN_ALE + KPN_CLE);
+
+ if (ctrl & NAND_CLE)
+ reg_val = reg_val | KPN_CLE;
+ if (ctrl & NAND_ALE)
+ reg_val = reg_val | KPN_ALE;
+ if (ctrl & NAND_NCE)
+ reg_val = reg_val & ~KPN_CE1N;
+ else
+ reg_val = reg_val | KPN_CE1N;
+
+ write_mode(reg_val);
+ }
+ if (cmd != NAND_CMD_NONE)
+ write_data(cmd);
+
+ /* wait until flash is ready */
+ kpn_wait_rdy();
+}
+
+static u_char kpn_nand_read_byte(struct mtd_info *mtd)
+{
+ return read_data();
+}
+
+static void kpn_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ write_data(buf[i]);
+ kpn_wait_rdy();
+ }
+}
+
+static void kpn_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ buf[i] = read_data();
+}
+
+static int kpn_nand_dev_ready(struct mtd_info *mtd)
+{
+ kpn_wait_rdy();
+
+ return 1;
+}
+
+int board_nand_init(struct nand_chip *nand)
+{
+ nand->ecc.mode = NAND_ECC_SOFT;
+
+ /* Reference hardware control function */
+ nand->cmd_ctrl = kpn_nand_hwcontrol;
+ nand->read_byte = kpn_nand_read_byte;
+ nand->write_buf = kpn_nand_write_buf;
+ nand->read_buf = kpn_nand_read_buf;
+ nand->dev_ready = kpn_nand_dev_ready;
+ nand->chip_delay = KPN_DEFAULT_CHIP_DELAY;
+
+ /* reset mode register */
+ write_mode(KPN_CE1N + KPN_CE2N + KPN_WPN);
+ return 0;
+}
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
new file mode 100644
index 0000000..647be0b
--- /dev/null
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -0,0 +1,880 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ * Copyright 2009 Ilya Yanok, <yanok@emcraft.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <linux/err.h>
+#include <asm/io.h>
+#ifdef CONFIG_MX27
+#include <asm/arch/imx-regs.h>
+#endif
+
+#define DRIVER_NAME "mxc_nand"
+
+struct nfc_regs {
+/* NFC RAM BUFFER Main area 0 */
+ uint8_t main_area0[0x200];
+ uint8_t main_area1[0x200];
+ uint8_t main_area2[0x200];
+ uint8_t main_area3[0x200];
+/* SPARE BUFFER Spare area 0 */
+ uint8_t spare_area0[0x10];
+ uint8_t spare_area1[0x10];
+ uint8_t spare_area2[0x10];
+ uint8_t spare_area3[0x10];
+ uint8_t pad[0x5c0];
+/* NFC registers */
+ uint16_t nfc_buf_size;
+ uint16_t reserved;
+ uint16_t nfc_buf_addr;
+ uint16_t nfc_flash_addr;
+ uint16_t nfc_flash_cmd;
+ uint16_t nfc_config;
+ uint16_t nfc_ecc_status_result;
+ uint16_t nfc_rsltmain_area;
+ uint16_t nfc_rsltspare_area;
+ uint16_t nfc_wrprot;
+ uint16_t nfc_unlockstart_blkaddr;
+ uint16_t nfc_unlockend_blkaddr;
+ uint16_t nfc_nf_wrprst;
+ uint16_t nfc_config1;
+ uint16_t nfc_config2;
+};
+
+/*
+ * Set INT to 0, FCMD to 1, rest to 0 in NFC_CONFIG2 Register
+ * for Command operation
+ */
+#define NFC_CMD 0x1
+
+/*
+ * Set INT to 0, FADD to 1, rest to 0 in NFC_CONFIG2 Register
+ * for Address operation
+ */
+#define NFC_ADDR 0x2
+
+/*
+ * Set INT to 0, FDI to 1, rest to 0 in NFC_CONFIG2 Register
+ * for Input operation
+ */
+#define NFC_INPUT 0x4
+
+/*
+ * Set INT to 0, FDO to 001, rest to 0 in NFC_CONFIG2 Register
+ * for Data Output operation
+ */
+#define NFC_OUTPUT 0x8
+
+/*
+ * Set INT to 0, FD0 to 010, rest to 0 in NFC_CONFIG2 Register
+ * for Read ID operation
+ */
+#define NFC_ID 0x10
+
+/*
+ * Set INT to 0, FDO to 100, rest to 0 in NFC_CONFIG2 Register
+ * for Read Status operation
+ */
+#define NFC_STATUS 0x20
+
+/*
+ * Set INT to 1, rest to 0 in NFC_CONFIG2 Register for Read
+ * Status operation
+ */
+#define NFC_INT 0x8000
+
+#define NFC_SP_EN (1 << 2)
+#define NFC_ECC_EN (1 << 3)
+#define NFC_BIG (1 << 5)
+#define NFC_RST (1 << 6)
+#define NFC_CE (1 << 7)
+#define NFC_ONE_CYCLE (1 << 8)
+
+typedef enum {false, true} bool;
+
+struct mxc_nand_host {
+ struct mtd_info mtd;
+ struct nand_chip *nand;
+
+ struct nfc_regs __iomem *regs;
+ int spare_only;
+ int status_request;
+ int pagesize_2k;
+ int clk_act;
+ uint16_t col_addr;
+};
+
+static struct mxc_nand_host mxc_host;
+static struct mxc_nand_host *host = &mxc_host;
+
+/* Define delays in microsec for NAND device operations */
+#define TROP_US_DELAY 2000
+/* Macros to get byte and bit positions of ECC */
+#define COLPOS(x) ((x) >> 3)
+#define BITPOS(x) ((x) & 0xf)
+
+/* Define single bit Error positions in Main & Spare area */
+#define MAIN_SINGLEBIT_ERROR 0x4
+#define SPARE_SINGLEBIT_ERROR 0x1
+
+/* OOB placement block for use with hardware ecc generation */
+#ifdef CONFIG_MXC_NAND_HWECC
+static struct nand_ecclayout nand_hw_eccoob = {
+ .eccbytes = 5,
+ .eccpos = {6, 7, 8, 9, 10},
+ .oobfree = {{0, 5}, {11, 5}, }
+};
+#else
+static struct nand_ecclayout nand_soft_eccoob = {
+ .eccbytes = 6,
+ .eccpos = {6, 7, 8, 9, 10, 11},
+ .oobfree = {{0, 5}, {12, 4}, }
+};
+#endif
+
+static uint32_t *mxc_nand_memcpy32(uint32_t *dest, uint32_t *source, size_t size)
+{
+ uint32_t *d = dest;
+
+ size >>= 2;
+ while (size--)
+ __raw_writel(__raw_readl(source++), d++);
+ return dest;
+}
+
+/*
+ * This function polls the NANDFC to wait for the basic operation to
+ * complete by checking the INT bit of config2 register.
+ */
+static void wait_op_done(struct mxc_nand_host *host, int max_retries,
+ uint16_t param)
+{
+ uint32_t tmp;
+
+ while (max_retries-- > 0) {
+ if (readw(&host->regs->nfc_config2) & NFC_INT) {
+ tmp = readw(&host->regs->nfc_config2);
+ tmp &= ~NFC_INT;
+ writew(tmp, &host->regs->nfc_config2);
+ break;
+ }
+ udelay(1);
+ }
+ if (max_retries < 0) {
+ MTDDEBUG(MTD_DEBUG_LEVEL0, "%s(%d): INT not set\n",
+ __func__, param);
+ }
+}
+
+/*
+ * This function issues the specified command to the NAND device and
+ * waits for completion.
+ */
+static void send_cmd(struct mxc_nand_host *host, uint16_t cmd)
+{
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "send_cmd(host, 0x%x)\n", cmd);
+
+ writew(cmd, &host->regs->nfc_flash_cmd);
+ writew(NFC_CMD, &host->regs->nfc_config2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, TROP_US_DELAY, cmd);
+}
+
+/*
+ * This function sends an address (or partial address) to the
+ * NAND device. The address is used to select the source/destination for
+ * a NAND command.
+ */
+static void send_addr(struct mxc_nand_host *host, uint16_t addr)
+{
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "send_addr(host, 0x%x)\n", addr);
+
+ writew(addr, &host->regs->nfc_flash_addr);
+ writew(NFC_ADDR, &host->regs->nfc_config2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, TROP_US_DELAY, addr);
+}
+
+/*
+ * This function requests the NANDFC to initate the transfer
+ * of data currently in the NANDFC RAM buffer to the NAND device.
+ */
+static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
+ int spare_only)
+{
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only);
+
+ writew(buf_id, &host->regs->nfc_buf_addr);
+
+ /* Configure spare or page+spare access */
+ if (!host->pagesize_2k) {
+ uint16_t config1 = readw(&host->regs->nfc_config1);
+ if (spare_only)
+ config1 |= NFC_SP_EN;
+ else
+ config1 &= ~(NFC_SP_EN);
+ writew(config1, &host->regs->nfc_config1);
+ }
+
+ writew(NFC_INPUT, &host->regs->nfc_config2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, TROP_US_DELAY, spare_only);
+}
+
+/*
+ * Requests NANDFC to initated the transfer of data from the
+ * NAND device into in the NANDFC ram buffer.
+ */
+static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
+ int spare_only)
+{
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "send_read_page (%d)\n", spare_only);
+
+ writew(buf_id, &host->regs->nfc_buf_addr);
+
+ /* Configure spare or page+spare access */
+ if (!host->pagesize_2k) {
+ uint32_t config1 = readw(&host->regs->nfc_config1);
+ if (spare_only)
+ config1 |= NFC_SP_EN;
+ else
+ config1 &= ~NFC_SP_EN;
+ writew(config1, &host->regs->nfc_config1);
+ }
+
+ writew(NFC_OUTPUT, &host->regs->nfc_config2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, TROP_US_DELAY, spare_only);
+}
+
+/* Request the NANDFC to perform a read of the NAND device ID. */
+static void send_read_id(struct mxc_nand_host *host)
+{
+ uint16_t tmp;
+
+ /* NANDFC buffer 0 is used for device ID output */
+ writew(0x0, &host->regs->nfc_buf_addr);
+
+ /* Read ID into main buffer */
+ tmp = readw(&host->regs->nfc_config1);
+ tmp &= ~NFC_SP_EN;
+ writew(tmp, &host->regs->nfc_config1);
+
+ writew(NFC_ID, &host->regs->nfc_config2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, TROP_US_DELAY, 0);
+}
+
+/*
+ * This function requests the NANDFC to perform a read of the
+ * NAND device status and returns the current status.
+ */
+static uint16_t get_dev_status(struct mxc_nand_host *host)
+{
+ void __iomem *main_buf = host->regs->main_area1;
+ uint32_t store;
+ uint16_t ret, tmp;
+ /* Issue status request to NAND device */
+
+ /* store the main area1 first word, later do recovery */
+ store = readl(main_buf);
+ /* NANDFC buffer 1 is used for device status */
+ writew(1, &host->regs->nfc_buf_addr);
+
+ /* Read status into main buffer */
+ tmp = readw(&host->regs->nfc_config1);
+ tmp &= ~NFC_SP_EN;
+ writew(tmp, &host->regs->nfc_config1);
+
+ writew(NFC_STATUS, &host->regs->nfc_config2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, TROP_US_DELAY, 0);
+
+ /*
+ * Status is placed in first word of main buffer
+ * get status, then recovery area 1 data
+ */
+ ret = readw(main_buf);
+ writel(store, main_buf);
+
+ return ret;
+}
+
+/* This function is used by upper layer to checks if device is ready */
+static int mxc_nand_dev_ready(struct mtd_info *mtd)
+{
+ /*
+ * NFC handles R/B internally. Therefore, this function
+ * always returns status as ready.
+ */
+ return 1;
+}
+
+#ifdef CONFIG_MXC_NAND_HWECC
+static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ /*
+ * If HW ECC is enabled, we turn it on during init. There is
+ * no need to enable again here.
+ */
+}
+
+static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ /*
+ * 1-Bit errors are automatically corrected in HW. No need for
+ * additional correction. 2-Bit errors cannot be corrected by
+ * HW ECC, so we need to return failure
+ */
+ uint16_t ecc_status = readw(&host->regs->nfc_ecc_status_result);
+
+ if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
+ MTDDEBUG(MTD_DEBUG_LEVEL0,
+ "MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ return 0;
+}
+#endif
+
+static u_char mxc_nand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint8_t ret = 0;
+ uint16_t col;
+ uint16_t __iomem *main_buf =
+ (uint16_t __iomem *)host->regs->main_area0;
+ uint16_t __iomem *spare_buf =
+ (uint16_t __iomem *)host->regs->spare_area0;
+ union {
+ uint16_t word;
+ uint8_t bytes[2];
+ } nfc_word;
+
+ /* Check for status request */
+ if (host->status_request)
+ return get_dev_status(host) & 0xFF;
+
+ /* Get column for 16-bit access */
+ col = host->col_addr >> 1;
+
+ /* If we are accessing the spare region */
+ if (host->spare_only)
+ nfc_word.word = readw(&spare_buf[col]);
+ else
+ nfc_word.word = readw(&main_buf[col]);
+
+ /* Pick upper/lower byte of word from RAM buffer */
+ ret = nfc_word.bytes[host->col_addr & 0x1];
+
+ /* Update saved column address */
+ if (nand_chip->options & NAND_BUSWIDTH_16)
+ host->col_addr += 2;
+ else
+ host->col_addr++;
+
+ return ret;
+}
+
+static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t col, ret;
+ uint16_t __iomem *p;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3,
+ "mxc_nand_read_word(col = %d)\n", host->col_addr);
+
+ col = host->col_addr;
+ /* Adjust saved column address */
+ if (col < mtd->writesize && host->spare_only)
+ col += mtd->writesize;
+
+ if (col < mtd->writesize) {
+ p = (uint16_t __iomem *)(host->regs->main_area0 + (col >> 1));
+ } else {
+ p = (uint16_t __iomem *)(host->regs->spare_area0 +
+ ((col - mtd->writesize) >> 1));
+ }
+
+ if (col & 1) {
+ union {
+ uint16_t word;
+ uint8_t bytes[2];
+ } nfc_word[3];
+
+ nfc_word[0].word = readw(p);
+ nfc_word[1].word = readw(p + 1);
+
+ nfc_word[2].bytes[0] = nfc_word[0].bytes[1];
+ nfc_word[2].bytes[1] = nfc_word[1].bytes[0];
+
+ ret = nfc_word[2].word;
+ } else {
+ ret = readw(p);
+ }
+
+ /* Update saved column address */
+ host->col_addr = col + 2;
+
+ return ret;
+}
+
+/*
+ * Write data of length len to buffer buf. The data to be
+ * written on NAND Flash is first copied to RAMbuffer. After the Data Input
+ * Operation by the NFC, the data is written to NAND Flash
+ */
+static void mxc_nand_write_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ int n, col, i = 0;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3,
+ "mxc_nand_write_buf(col = %d, len = %d)\n", host->col_addr,
+ len);
+
+ col = host->col_addr;
+
+ /* Adjust saved column address */
+ if (col < mtd->writesize && host->spare_only)
+ col += mtd->writesize;
+
+ n = mtd->writesize + mtd->oobsize - col;
+ n = min(len, n);
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3,
+ "%s:%d: col = %d, n = %d\n", __func__, __LINE__, col, n);
+
+ while (n > 0) {
+ void __iomem *p;
+
+ if (col < mtd->writesize) {
+ p = host->regs->main_area0 + (col & ~3);
+ } else {
+ p = host->regs->spare_area0 -
+ mtd->writesize + (col & ~3);
+ }
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3, "%s:%d: p = %p\n", __func__,
+ __LINE__, p);
+
+ if (((col | (unsigned long)&buf[i]) & 3) || n < 4) {
+ union {
+ uint32_t word;
+ uint8_t bytes[4];
+ } nfc_word;
+
+ nfc_word.word = readl(p);
+ nfc_word.bytes[col & 3] = buf[i++];
+ n--;
+ col++;
+
+ writel(nfc_word.word, p);
+ } else {
+ int m = mtd->writesize - col;
+
+ if (col >= mtd->writesize)
+ m += mtd->oobsize;
+
+ m = min(n, m) & ~3;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3,
+ "%s:%d: n = %d, m = %d, i = %d, col = %d\n",
+ __func__, __LINE__, n, m, i, col);
+
+ mxc_nand_memcpy32(p, (uint32_t *)&buf[i], m);
+ col += m;
+ i += m;
+ n -= m;
+ }
+ }
+ /* Update saved column address */
+ host->col_addr = col;
+}
+
+/*
+ * Read the data buffer from the NAND Flash. To read the data from NAND
+ * Flash first the data output cycle is initiated by the NFC, which copies
+ * the data to RAMbuffer. This data of length len is then copied to buffer buf.
+ */
+static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ int n, col, i = 0;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3,
+ "mxc_nand_read_buf(col = %d, len = %d)\n", host->col_addr, len);
+
+ col = host->col_addr;
+
+ /* Adjust saved column address */
+ if (col < mtd->writesize && host->spare_only)
+ col += mtd->writesize;
+
+ n = mtd->writesize + mtd->oobsize - col;
+ n = min(len, n);
+
+ while (n > 0) {
+ void __iomem *p;
+
+ if (col < mtd->writesize) {
+ p = host->regs->main_area0 + (col & ~3);
+ } else {
+ p = host->regs->spare_area0 -
+ mtd->writesize + (col & ~3);
+ }
+
+ if (((col | (int)&buf[i]) & 3) || n < 4) {
+ union {
+ uint32_t word;
+ uint8_t bytes[4];
+ } nfc_word;
+
+ nfc_word.word = readl(p);
+ buf[i++] = nfc_word.bytes[col & 3];
+ n--;
+ col++;
+ } else {
+ int m = mtd->writesize - col;
+
+ if (col >= mtd->writesize)
+ m += mtd->oobsize;
+
+ m = min(n, m) & ~3;
+ mxc_nand_memcpy32((uint32_t *)&buf[i], p, m);
+
+ col += m;
+ i += m;
+ n -= m;
+ }
+ }
+ /* Update saved column address */
+ host->col_addr = col;
+}
+
+/*
+ * Used by the upper layer to verify the data in NAND Flash
+ * with the data in the buf.
+ */
+static int mxc_nand_verify_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ u_char tmp[256];
+ uint bsize;
+
+ while (len) {
+ bsize = min(len, 256);
+ mxc_nand_read_buf(mtd, tmp, bsize);
+
+ if (memcmp(buf, tmp, bsize))
+ return 1;
+
+ buf += bsize;
+ len -= bsize;
+ }
+
+ return 0;
+}
+
+/*
+ * This function is used by upper layer for select and
+ * deselect of the NAND chip
+ */
+static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ switch (chip) {
+ case -1:
+ /* TODO: Disable the NFC clock */
+ if (host->clk_act)
+ host->clk_act = 0;
+ break;
+ case 0:
+ /* TODO: Enable the NFC clock */
+ if (!host->clk_act)
+ host->clk_act = 1;
+ break;
+
+ default:
+ break;
+ }
+}
+
+/*
+ * Used by the upper layer to write command to NAND Flash for
+ * different operations to be carried out on NAND Flash
+ */
+static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ MTDDEBUG(MTD_DEBUG_LEVEL3,
+ "mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+ command, column, page_addr);
+
+ /* Reset command state information */
+ host->status_request = false;
+
+ /* Command pre-processing step */
+ switch (command) {
+
+ case NAND_CMD_STATUS:
+ host->col_addr = 0;
+ host->status_request = true;
+ break;
+
+ case NAND_CMD_READ0:
+ host->col_addr = column;
+ host->spare_only = false;
+ break;
+
+ case NAND_CMD_READOOB:
+ host->col_addr = column;
+ host->spare_only = true;
+ if (host->pagesize_2k)
+ command = NAND_CMD_READ0; /* only READ0 is valid */
+ break;
+
+ case NAND_CMD_SEQIN:
+ if (column >= mtd->writesize) {
+ /*
+ * before sending SEQIN command for partial write,
+ * we need read one page out. FSL NFC does not support
+ * partial write. It alway send out 512+ecc+512+ecc ...
+ * for large page nand flash. But for small page nand
+ * flash, it does support SPARE ONLY operation.
+ */
+ if (host->pagesize_2k) {
+ /* call ourself to read a page */
+ mxc_nand_command(mtd, NAND_CMD_READ0, 0,
+ page_addr);
+ }
+
+ host->col_addr = column - mtd->writesize;
+ host->spare_only = true;
+
+ /* Set program pointer to spare region */
+ if (!host->pagesize_2k)
+ send_cmd(host, NAND_CMD_READOOB);
+ } else {
+ host->spare_only = false;
+ host->col_addr = column;
+
+ /* Set program pointer to page start */
+ if (!host->pagesize_2k)
+ send_cmd(host, NAND_CMD_READ0);
+ }
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ send_prog_page(host, 0, host->spare_only);
+
+ if (host->pagesize_2k) {
+ /* data in 4 areas datas */
+ send_prog_page(host, 1, host->spare_only);
+ send_prog_page(host, 2, host->spare_only);
+ send_prog_page(host, 3, host->spare_only);
+ }
+
+ break;
+ }
+
+ /* Write out the command to the device. */
+ send_cmd(host, command);
+
+ /* Write out column address, if necessary */
+ if (column != -1) {
+ /*
+ * MXC NANDFC can only perform full page+spare or
+ * spare-only read/write. When the upper layers
+ * layers perform a read/write buf operation,
+ * we will used the saved column adress to index into
+ * the full page.
+ */
+ send_addr(host, 0);
+ if (host->pagesize_2k)
+ /* another col addr cycle for 2k page */
+ send_addr(host, 0);
+ }
+
+ /* Write out page address, if necessary */
+ if (page_addr != -1) {
+ /* paddr_0 - p_addr_7 */
+ send_addr(host, (page_addr & 0xff));
+
+ if (host->pagesize_2k) {
+ send_addr(host, (page_addr >> 8) & 0xFF);
+ if (mtd->size >= 0x10000000) {
+ /* paddr_8 - paddr_15 */
+ send_addr(host, (page_addr >> 8) & 0xff);
+ send_addr(host, (page_addr >> 16) & 0xff);
+ } else {
+ /* paddr_8 - paddr_15 */
+ send_addr(host, (page_addr >> 8) & 0xff);
+ }
+ } else {
+ /* One more address cycle for higher density devices */
+ if (mtd->size >= 0x4000000) {
+ /* paddr_8 - paddr_15 */
+ send_addr(host, (page_addr >> 8) & 0xff);
+ send_addr(host, (page_addr >> 16) & 0xff);
+ } else {
+ /* paddr_8 - paddr_15 */
+ send_addr(host, (page_addr >> 8) & 0xff);
+ }
+ }
+ }
+
+ /* Command post-processing step */
+ switch (command) {
+
+ case NAND_CMD_RESET:
+ break;
+
+ case NAND_CMD_READOOB:
+ case NAND_CMD_READ0:
+ if (host->pagesize_2k) {
+ /* send read confirm command */
+ send_cmd(host, NAND_CMD_READSTART);
+ /* read for each AREA */
+ send_read_page(host, 0, host->spare_only);
+ send_read_page(host, 1, host->spare_only);
+ send_read_page(host, 2, host->spare_only);
+ send_read_page(host, 3, host->spare_only);
+ } else {
+ send_read_page(host, 0, host->spare_only);
+ }
+ break;
+
+ case NAND_CMD_READID:
+ host->col_addr = 0;
+ send_read_id(host);
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ break;
+
+ case NAND_CMD_STATUS:
+ break;
+
+ case NAND_CMD_ERASE2:
+ break;
+ }
+}
+
+int board_nand_init(struct nand_chip *this)
+{
+ struct system_control_regs *sc_regs =
+ (struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
+ struct mtd_info *mtd;
+ uint16_t tmp;
+ int err = 0;
+
+ /* structures must be linked */
+ mtd = &host->mtd;
+ mtd->priv = this;
+ host->nand = this;
+
+ /* 5 us command delay time */
+ this->chip_delay = 5;
+
+ this->priv = host;
+ this->dev_ready = mxc_nand_dev_ready;
+ this->cmdfunc = mxc_nand_command;
+ this->select_chip = mxc_nand_select_chip;
+ this->read_byte = mxc_nand_read_byte;
+ this->read_word = mxc_nand_read_word;
+ this->write_buf = mxc_nand_write_buf;
+ this->read_buf = mxc_nand_read_buf;
+ this->verify_buf = mxc_nand_verify_buf;
+
+ host->regs = (struct nfc_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE;
+ host->clk_act = 1;
+
+#ifdef CONFIG_MXC_NAND_HWECC
+ this->ecc.calculate = mxc_nand_calculate_ecc;
+ this->ecc.hwctl = mxc_nand_enable_hwecc;
+ this->ecc.correct = mxc_nand_correct_data;
+ this->ecc.mode = NAND_ECC_HW;
+ this->ecc.size = 512;
+ this->ecc.bytes = 3;
+ this->ecc.layout = &nand_hw_eccoob;
+ tmp = readw(&host->regs->nfc_config1);
+ tmp |= NFC_ECC_EN;
+ writew(tmp, &host->regs->nfc_config1);
+#else
+ this->ecc.layout = &nand_soft_eccoob;
+ this->ecc.mode = NAND_ECC_SOFT;
+ tmp = readw(&host->regs->nfc_config1);
+ tmp &= ~NFC_ECC_EN;
+ writew(tmp, &host->regs->nfc_config1);
+#endif
+
+ /* Reset NAND */
+ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+ /*
+ * preset operation
+ * Unlock the internal RAM Buffer
+ */
+ writew(0x2, &host->regs->nfc_config);
+
+ /* Blocks to be unlocked */
+ writew(0x0, &host->regs->nfc_unlockstart_blkaddr);
+ writew(0x4000, &host->regs->nfc_unlockend_blkaddr);
+
+ /* Unlock Block Command for given address range */
+ writew(0x4, &host->regs->nfc_wrprot);
+
+ /* NAND bus width determines access funtions used by upper layer */
+ if (readl(&sc_regs->fmcr) & NF_16BIT_SEL)
+ this->options |= NAND_BUSWIDTH_16;
+
+ host->pagesize_2k = 0;
+
+ return err;
+}
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 360b070..426bb95 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -895,7 +895,7 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this)
* @buf: buffer to store read data
*/
static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
@@ -909,7 +909,7 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
* @buf: buffer to store read data
*/
static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -919,7 +919,7 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
uint8_t *ecc_code = chip->buffers->ecccode;
uint32_t *eccpos = chip->ecc.layout->eccpos;
- chip->ecc.read_page_raw(mtd, chip, buf);
+ chip->ecc.read_page_raw(mtd, chip, buf, page);
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
chip->ecc.calculate(mtd, p, &ecc_calc[i]);
@@ -1032,7 +1032,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3
* Not for syndrome calculating ecc controllers which need a special oob layout
*/
static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1068,6 +1068,54 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
}
/**
+ * nand_read_page_hwecc_oob_first - [REPLACABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ *
+ * Hardware ECC for large page chips, require OOB to be read first.
+ * For this ECC mode, the write_page method is re-used from ECC_HW.
+ * These methods read/write ECC from the OOB area, unlike the
+ * ECC_HW_SYNDROME support with multiple ECC steps, follows the
+ * "infix ECC" scheme and reads/writes ECC from the data area, by
+ * overwriting the NAND manufacturer bad block markings.
+ */
+static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int page)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+
+ /* Read the OOB area first */
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
+ if (stat < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+ }
+ return 0;
+}
+
+/**
* nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
@@ -1077,7 +1125,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
* we need a special oob layout and handling.
*/
static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf)
+ uint8_t *buf, int page)
{
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
@@ -1219,11 +1267,13 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
/* Now read the page into the buffer */
if (unlikely(ops->mode == MTD_OOB_RAW))
- ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+ ret = chip->ecc.read_page_raw(mtd, chip,
+ bufpoi, page);
else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
else
- ret = chip->ecc.read_page(mtd, chip, bufpoi);
+ ret = chip->ecc.read_page(mtd, chip, bufpoi,
+ page);
if (ret < 0)
break;
@@ -2728,6 +2778,17 @@ int nand_scan_tail(struct mtd_info *mtd)
chip->ecc.write_page_raw = nand_write_page_raw;
switch (chip->ecc.mode) {
+ case NAND_ECC_HW_OOB_FIRST:
+ /* Similar to NAND_ECC_HW, but a separate read_page handle */
+ if (!chip->ecc.calculate || !chip->ecc.correct ||
+ !chip->ecc.hwctl) {
+ printk(KERN_WARNING "No ECC functions supplied, "
+ "Hardware ECC not possible\n");
+ BUG();
+ }
+ if (!chip->ecc.read_page)
+ chip->ecc.read_page = nand_read_page_hwecc_oob_first;
+
case NAND_ECC_HW:
/* Use standard hwecc read page function ? */
if (!chip->ecc.read_page)
diff --git a/include/asm-arm/arch-davinci/emif_defs.h b/include/asm-arm/arch-davinci/emif_defs.h
index 646fc77..c91e30c 100644
--- a/include/asm-arm/arch-davinci/emif_defs.h
+++ b/include/asm-arm/arch-davinci/emif_defs.h
@@ -55,6 +55,16 @@ typedef struct {
dv_reg NANDF2ECC;
dv_reg NANDF3ECC;
dv_reg NANDF4ECC;
+ u_int8_t RSVD2[60];
+ dv_reg NAND4BITECCLOAD;
+ dv_reg NAND4BITECC1;
+ dv_reg NAND4BITECC2;
+ dv_reg NAND4BITECC3;
+ dv_reg NAND4BITECC4;
+ dv_reg NANDERRADD1;
+ dv_reg NANDERRADD2;
+ dv_reg NANDERRVAL1;
+ dv_reg NANDERRVAL2;
} emif_registers;
typedef emif_registers *emifregs;
diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h
index 869fd4c..79d8638 100644
--- a/include/configs/kmeter1.h
+++ b/include/configs/kmeter1.h
@@ -324,6 +324,12 @@
#define CONFIG_SYS_DTT_HYSTERESIS 3
#define CONFIG_SYS_DTT_BUS_NUM (CONFIG_SYS_MAX_I2C_BUS)
+#if defined(CONFIG_CMD_NAND)
+#define CONFIG_NAND_KMETER1
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE CONFIG_SYS_PIGGY_BASE
+#endif
+
#if defined(CONFIG_PCI)
#define CONFIG_CMD_PCI
#endif
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 3e0044b..cb7c19a 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -128,6 +128,7 @@ typedef enum {
NAND_ECC_SOFT,
NAND_ECC_HW,
NAND_ECC_HW_SYNDROME,
+ NAND_ECC_HW_OOB_FIRST,
} nand_ecc_modes_t;
/*
@@ -268,13 +269,13 @@ struct nand_ecc_ctrl {
uint8_t *calc_ecc);
int (*read_page_raw)(struct mtd_info *mtd,
struct nand_chip *chip,
- uint8_t *buf);
+ uint8_t *buf, int page);
void (*write_page_raw)(struct mtd_info *mtd,
struct nand_chip *chip,
const uint8_t *buf);
int (*read_page)(struct mtd_info *mtd,
struct nand_chip *chip,
- uint8_t *buf);
+ uint8_t *buf, int page);
int (*read_subpage)(struct mtd_info *mtd,
struct nand_chip *chip,
uint32_t offs, uint32_t len,