1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
|
/*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Logic lh7a400-10 Card Engine CPLD interface
*/
#ifndef __LPD7A400_CPLD_H_
#define __LPD7A400_CPLD_H_
/*
* IO Controller Address and Register Definitions
* - using LH7A400-10 Card Engine IO Controller Specification
* (logic PN: 70000079)
*/
/*------------------------------------------------------------------
* Slow Peripherals (nCS6)
*/
#define LPD7A400_CPLD_CF (0x60200000)
#define LPD7A400_CPLD_ISA (0x60400000)
/*------------------------------------------------------------------
* Fast Peripherals (nCS7)
*
* The CPLD directs access to 0x70000000-0x701fffff to the onboard
* ethernet controller
*/
#define LPD7A400_CPLD_WLAN_BASE (0x70000000)
/* All registers are 8 bit */
#define LPD7A400_CPLD_CECTL_REG (0x70200000)
#define LPD7A400_CPLD_SPIDATA_REG (0x70600000)
#define LPD7A400_CPLD_SPICTL_REG (0x70800000)
#define LPD7A400_CPLD_EEPSPI_REG (0x70a00000)
#define LPD7A400_CPLD_INTMASK_REG (0x70c00000)
#define LPD7A400_CPLD_MODE_REG (0x70e00000)
#define LPD7A400_CPLD_FLASH_REG (0x71000000)
#define LPD7A400_CPLD_PWRMG_REG (0x71200000)
#define LPD7A400_CPLD_REV_REG (0x71400000)
#define LPD7A400_CPLD_EXTGPIO_REG (0x71600000)
#define LPD7A400_CPLD_GPIODATA_REG (0x71800000)
#define LPD7A400_CPLD_GPIODIR_REG (0x71a00000)
#define LPD7A400_CPLD_REGPTR (volatile u8*)
/* Card Engine Control Register (section 3.1.2) */
#define CECTL_SWINT (0x80) /* Software settable interrupt source
(routed to uP PF3)
0 = generate interrupt, 1 = do not */
#define CECTL_OCMSK (0x40) /* USB1 connection interrupt mask
0 = not masked, 1 = masked */
#define CECTL_PDRV (0x20) /* PCC_nDRV output
0 = active, 1 = inactive */
#define CECTL_USB1C (0x10) /* USB1 connection interrupt
0 = active, 1 = inactive */
#define CECTL_USB1P (0x08) /* USB1 Power enable
0 = enabled, 1 = disabled */
#define CECTL_AWKP (0x04) /* Auto-Wakeup enable
0 = enabled, 1 = disabled */
#define CECTL_LCDV (0x02) /* LCD VEE enable
0 = disabled, 1 = enabled */
#define CECTL_WLPE (0x01) /* Wired LAN power enable
0 = enabled, 1 = disabled */
/* SPI Control Register (section 3.1.5) */
#define SPICTL_SPLD (0x20) /* SPI load (R)
0 = data reg. has not been loaded, shift
count has not been reset
1 = data reg. loaded, shift count reset */
#define SPICTL_SPST (0x10) /* SPI start (RW)
0 = don't load data reg. and reset shift count
1 = ready to load data reg and reset shift count */
#define SPICTL_SPDN (0x08) /* SPI done (R)
0 = not done
1 = access done */
#define SPICTL_SPRW (0x04) /* SPI read/write (RW)
0 = SPI write access
1 = SPI read access */
#define SPICTL_STCS (0x02) /* SPI touch chip select (RW)
0 = not selected
1 = selected */
#define SPICTL_SCCS (0x01) /* SPI CODEC chip select (RW) {not used}
0 = not selected
1 = selected */
/* EEPROM SPI Interface Register (section 3.1.6) */
#define EEPSPI_EECS (0x08) /* EEPROM chip select (RW)
0 = not selected
1 = selected */
#define EEPSPI_EECK (0x04) /* EEPROM SPI clock (RW) */
#define EEPSPI_EETX (0x02) /* EEPROM SPI tx data (RW) */
#define EEPSPI_EERX (0x01) /* EEPROM SPI rx data (R) */
/* Interrupt/Mask Register (section 3.1.7) */
#define INTMASK_CMSK (0x80) /* CPLD_nIRQD interrupt mask (RW)
0 = not masked
1 = masked */
#define INTMASK_CIRQ (0x40) /* interrupt signal to CPLD (R)
0 = interrupt active
1 = no interrupt */
#define INTMASK_PIRQ (0x10) /* legacy, no effect */
#define INTMASK_TMSK (0x08) /* Touch chip interrupt mask (RW)
0 = not masked
1 = masked */
#define INTMASK_WMSK (0x04) /* Wired LAN interrupt mask (RW)
0 = not masked
1 = masked */
#define INTMASK_TIRQ (0x02) /* Touch chip interrupt request (R)
0 = interrupt active
1 = no interrupt */
#define INTMASK_WIRQ (0x01) /* Wired LAN interrupt request (R)
0 = interrupt active
1 = no interrupt */
/* Mode Register (section 3.1.8) */
#define MODE_VS1 (0x80) /* PCMCIA Voltage Sense 1 input (PCC_VS1) (R)
0 = active slot VS1 pin is low
1 = active slot VS1 pin is high */
#define MODE_CD2 (0x40) /* PCMCIA Card Detect 2 input (PCC_nCD2) (R)
0 = active slot CD2 is low
1 = active slot CD2 is high */
#define MODE_IOIS16 (0x20) /* PCMCIA IOIS16 input (PCC_nIOIS16) (R)
0 = 16 bit access area
1 = 8 bit access area */
#define MODE_CD1 (0x10) /* PCMCIA Card Detect 1 input (PCC_nCD1) (R)
0 = active slot CD1 is low
1 = active slot CD1 is high */
#define MODE_upMODE3 (0x08) /* Mode Pin 3 (R)
0 = off-board boot device
1 = on-board boot device (flash) */
#define MODE_upMODE2 (0x04) /* Mode Pin 2 (R) (LH7A400 Little Endian only)
0 = big endian
1 = little endian */
#define MODE_upMODE1 (0x02) /* Mode Pin 1 and Mode Pin 2 (R) */
#define MODE_upMODE0 (0x01) /* - bus width at boot */
/* Flash Register (section 3.1.9) */
#define FLASH_FPOP (0x08) /* Flash populated (RW)
0 = populated, 1 = not */
#define FLASH_FST2 (0x04) /* Flash status (R) (RY/BY# pin for upper 16 bit chip
0 = busy, 1 = ready */
#define FLASH_FST1 (0x02) /* Flash status (R) (RY/BY# pin for lower 16 bit chip
0 = busy, 1 = ready */
#define FLASH_FPEN (0x01) /* Flash program enable (RW)
0 = flash write protected
1 = programming enabled */
/* Power Management Register (section 3.1.10)
* - when either of these is low an unmaskable interrupt to cpu
* is generated
*/
#define PWRMG_STBY (0x10) /* state of nSTANDBY signal to CPLD (R)
0 = low, 1 = high */
#define PWRMG_SPND (0x04) /* state of nSUSPEND signal to CPLD (R)
0 = low, 1 = high */
/* Extended GPIO Register (section 3.1.12) */
#define EXTGPIO_STATUS1 (0x04) /* Status 1 output (RW) (uP_STATUS_1)
0 = set pin low, 1 = set pin high */
#define EXTGPIO_STATUS2 (0x02) /* Status 2 output (RW) (uP_STATUS_2)
0 = set pin low, 1 = set pin high */
#define EXTGPIO_GPIO1 (0x01) /* General purpose output (RW) (CPLD_GPIO_1)
0 = set pin low, 1 = set pin high */
/* GPIO Data Register (section 3.1.13) */
#define GPIODATA_GPIO2 (0x01) /* General purpose input/output (RW) (CPLD_GPIO_2)
0 = set low (output) / read low (input)
1 = set high (output) / read high (input) */
/* GPIO Direction Register (section 3.1.14) */
#define GPIODIR_GPDR0 (0x01) /* GPIO2 direction (RW)
0 = output, 1 = input */
#endif /* __LH7A400_H__ */
|
