1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
|
/*
* Blackfin MUSB HCD (Host Controller Driver) for u-boot
*
* Copyright (c) 2008-2009 Analog Devices Inc.
*
* Licensed under the GPL-2 or later.
*/
#include <common.h>
#include <usb.h>
#include <asm/blackfin.h>
#include <asm/mach-common/bits/usb.h>
#include "musb_core.h"
/* MUSB platform configuration */
struct musb_config musb_cfg = {
.regs = (struct musb_regs *)USB_FADDR,
.timeout = 0x3FFFFFF,
.musb_speed = 0,
};
/*
* This function read or write data to endpoint fifo
* Blackfin use DMA polling method to avoid buffer alignment issues
*
* ep - Endpoint number
* length - Number of bytes to write to FIFO
* fifo_data - Pointer to data buffer to be read/write
* is_write - Flag for read or write
*/
void rw_fifo(u8 ep, u32 length, void *fifo_data, int is_write)
{
struct bfin_musb_dma_regs *regs;
u32 val = (u32)fifo_data;
blackfin_dcache_flush_invalidate_range(fifo_data, fifo_data + length);
regs = (void *)USB_DMA_INTERRUPT;
regs += ep;
/* Setup DMA address register */
bfin_write16(®s->addr_low, val);
SSYNC();
bfin_write16(®s->addr_high, val >> 16);
SSYNC();
/* Setup DMA count register */
bfin_write16(®s->count_low, length);
bfin_write16(®s->count_high, 0);
SSYNC();
/* Enable the DMA */
val = (ep << 4) | DMA_ENA | INT_ENA;
if (is_write)
val |= DIRECTION;
bfin_write16(®s->control, val);
SSYNC();
/* Wait for compelete */
while (!(bfin_read_USB_DMA_INTERRUPT() & (1 << ep)))
continue;
/* acknowledge dma interrupt */
bfin_write_USB_DMA_INTERRUPT(1 << ep);
SSYNC();
/* Reset DMA */
bfin_write16(®s->control, 0);
SSYNC();
}
void write_fifo(u8 ep, u32 length, void *fifo_data)
{
rw_fifo(ep, length, fifo_data, 1);
}
void read_fifo(u8 ep, u32 length, void *fifo_data)
{
rw_fifo(ep, length, fifo_data, 0);
}
/*
* CPU and board-specific MUSB initializations. Aliased function
* signals caller to move on.
*/
static void __def_musb_init(void)
{
}
void board_musb_init(void) __attribute__((weak, alias("__def_musb_init")));
int musb_platform_init(void)
{
/* board specific initialization */
board_musb_init();
if (ANOMALY_05000346) {
bfin_write_USB_APHY_CALIB(ANOMALY_05000346_value);
SSYNC();
}
if (ANOMALY_05000347) {
bfin_write_USB_APHY_CNTRL(0x0);
SSYNC();
}
/* Configure PLL oscillator register */
bfin_write_USB_PLLOSC_CTRL(0x30a8);
SSYNC();
bfin_write_USB_SRP_CLKDIV((get_sclk()/1000) / 32 - 1);
SSYNC();
bfin_write_USB_EP_NI0_RXMAXP(64);
SSYNC();
bfin_write_USB_EP_NI0_TXMAXP(64);
SSYNC();
/* Route INTRUSB/INTR_RX/INTR_TX to USB_INT0*/
bfin_write_USB_GLOBINTR(0x7);
SSYNC();
bfin_write_USB_GLOBAL_CTL(GLOBAL_ENA | EP1_TX_ENA | EP2_TX_ENA |
EP3_TX_ENA | EP4_TX_ENA | EP5_TX_ENA |
EP6_TX_ENA | EP7_TX_ENA | EP1_RX_ENA |
EP2_RX_ENA | EP3_RX_ENA | EP4_RX_ENA |
EP5_RX_ENA | EP6_RX_ENA | EP7_RX_ENA);
SSYNC();
return 0;
}
/*
* This function performs Blackfin platform specific deinitialization for usb.
*/
void musb_platform_deinit(void)
{
}
|
