1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
|
/*
* Copyright (c) 2015 Sanchayan Maity <sanchayan.maity@toradex.com>
* Copyright (C) 2015 Toradex AG
*
* Based on ehci-mx6 driver
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <usb.h>
#include <errno.h>
#include <linux/compiler.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm/imx-common/regs-usbphy.h>
#include <usb/ehci-fsl.h>
#include "ehci.h"
#define USB_NC_REG_OFFSET 0x00000800
#define ANADIG_PLL_CTRL_EN_USB_CLKS (1 << 6)
#define UCTRL_OVER_CUR_POL (1 << 8) /* OTG Polarity of Overcurrent */
#define UCTRL_OVER_CUR_DIS (1 << 7) /* Disable OTG Overcurrent Detection */
/* USBCMD */
#define UCMD_RUN_STOP (1 << 0) /* controller run/stop */
#define UCMD_RESET (1 << 1) /* controller reset */
static const unsigned phy_bases[] = {
USB_PHY0_BASE_ADDR,
USB_PHY1_BASE_ADDR,
};
static const unsigned nc_reg_bases[] = {
USBC0_BASE_ADDR,
USBC1_BASE_ADDR,
};
static void usb_internal_phy_clock_gate(int index)
{
void __iomem *phy_reg;
phy_reg = (void __iomem *)phy_bases[index];
clrbits_le32(phy_reg + USBPHY_CTRL, USBPHY_CTRL_CLKGATE);
}
static void usb_power_config(int index)
{
struct anadig_reg __iomem *anadig =
(struct anadig_reg __iomem *)ANADIG_BASE_ADDR;
void __iomem *pll_ctrl;
switch (index) {
case 0:
pll_ctrl = &anadig->pll3_ctrl;
clrbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_BYPASS);
setbits_le32(pll_ctrl, ANADIG_PLL3_CTRL_ENABLE
| ANADIG_PLL3_CTRL_POWERDOWN
| ANADIG_PLL_CTRL_EN_USB_CLKS);
break;
case 1:
pll_ctrl = &anadig->pll7_ctrl;
clrbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_BYPASS);
setbits_le32(pll_ctrl, ANADIG_PLL7_CTRL_ENABLE
| ANADIG_PLL7_CTRL_POWERDOWN
| ANADIG_PLL_CTRL_EN_USB_CLKS);
break;
default:
return;
}
}
static void usb_phy_enable(int index, struct usb_ehci *ehci)
{
void __iomem *phy_reg;
void __iomem *phy_ctrl;
void __iomem *usb_cmd;
phy_reg = (void __iomem *)phy_bases[index];
phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL);
usb_cmd = (void __iomem *)&ehci->usbcmd;
/* Stop then Reset */
clrbits_le32(usb_cmd, UCMD_RUN_STOP);
while (readl(usb_cmd) & UCMD_RUN_STOP)
;
setbits_le32(usb_cmd, UCMD_RESET);
while (readl(usb_cmd) & UCMD_RESET)
;
/* Reset USBPHY module */
setbits_le32(phy_ctrl, USBPHY_CTRL_SFTRST);
udelay(10);
/* Remove CLKGATE and SFTRST */
clrbits_le32(phy_ctrl, USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST);
udelay(10);
/* Power up the PHY */
writel(0, phy_reg + USBPHY_PWD);
/* Enable FS/LS device */
setbits_le32(phy_ctrl, USBPHY_CTRL_ENUTMILEVEL2 |
USBPHY_CTRL_ENUTMILEVEL3);
}
static void usb_oc_config(int index)
{
void __iomem *ctrl;
ctrl = (void __iomem *)(nc_reg_bases[index] + USB_NC_REG_OFFSET);
setbits_le32(ctrl, UCTRL_OVER_CUR_POL);
setbits_le32(ctrl, UCTRL_OVER_CUR_DIS);
}
int __weak board_ehci_hcd_init(int port)
{
return 0;
}
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
struct usb_ehci *ehci;
if (index >= ARRAY_SIZE(nc_reg_bases))
return -EINVAL;
if (init == USB_INIT_DEVICE && index == 1)
return -ENODEV;
if (init == USB_INIT_HOST && index == 0)
return -ENODEV;
ehci = (struct usb_ehci *)nc_reg_bases[index];
/* Do board specific initialisation */
board_ehci_hcd_init(index);
usb_power_config(index);
usb_oc_config(index);
usb_internal_phy_clock_gate(index);
usb_phy_enable(index, ehci);
*hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength);
*hcor = (struct ehci_hcor *)((uint32_t)*hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
if (init == USB_INIT_DEVICE) {
setbits_le32(&ehci->usbmode, CM_DEVICE);
writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
setbits_le32(&ehci->portsc, USB_EN);
} else if (init == USB_INIT_HOST) {
setbits_le32(&ehci->usbmode, CM_HOST);
writel((PORT_PTS_UTMI | PORT_PTS_PTW), &ehci->portsc);
setbits_le32(&ehci->portsc, USB_EN);
}
return 0;
}
int ehci_hcd_stop(int index)
{
return 0;
}
|
