1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
|
/*
* (C) Copyright 2011-2013
* Texas Instruments, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <asm/errno.h>
#include <power/pmic.h>
#include <power/tps65218.h>
int tps65218_reg_read(uchar dest_reg, uchar *dest_val)
{
uchar read_val;
int ret;
ret = i2c_read(TPS65218_CHIP_PM, dest_reg, 1, &read_val, 1);
if (ret)
return ret;
*dest_val = read_val;
return 0;
}
/**
* tps65218_reg_write() - Generic function that can write a TPS65218 PMIC
* register or bit field regardless of protection
* level.
*
* @prot_level: Register password protection. Use
* TPS65218_PROT_LEVEL_NONE,
* TPS65218_PROT_LEVEL_1 or TPS65218_PROT_LEVEL_2
* @dest_reg: Register address to write.
* @dest_val: Value to write.
* @mask: Bit mask (8 bits) to be applied. Function will only
* change bits that are set in the bit mask.
*
* @return: 0 for success, not 0 on failure, as per the i2c API
*/
int tps65218_reg_write(uchar prot_level, uchar dest_reg, uchar dest_val,
uchar mask)
{
uchar read_val;
uchar xor_reg;
int ret;
/*
* If we are affecting only a bit field, read dest_reg and apply the
* mask
*/
if (mask != TPS65218_MASK_ALL_BITS) {
ret = i2c_read(TPS65218_CHIP_PM, dest_reg, 1, &read_val, 1);
if (ret)
return ret;
read_val &= (~mask);
read_val |= (dest_val & mask);
dest_val = read_val;
}
if (prot_level > 0) {
xor_reg = dest_reg ^ TPS65218_PASSWORD_UNLOCK;
ret = i2c_write(TPS65218_CHIP_PM, TPS65218_PASSWORD, 1,
&xor_reg, 1);
if (ret)
return ret;
}
ret = i2c_write(TPS65218_CHIP_PM, dest_reg, 1, &dest_val, 1);
if (ret)
return ret;
if (prot_level == TPS65218_PROT_LEVEL_2) {
ret = i2c_write(TPS65218_CHIP_PM, TPS65218_PASSWORD, 1,
&xor_reg, 1);
if (ret)
return ret;
ret = i2c_write(TPS65218_CHIP_PM, dest_reg, 1, &dest_val, 1);
if (ret)
return ret;
}
return 0;
}
/**
* tps65218_voltage_update() - Function to change a voltage level, as this
* is a multi-step process.
* @dc_cntrl_reg: DC voltage control register to change.
* @volt_sel: New value for the voltage register
* @return: 0 for success, not 0 on failure.
*/
int tps65218_voltage_update(uchar dc_cntrl_reg, uchar volt_sel)
{
if ((dc_cntrl_reg != TPS65218_DCDC1) &&
(dc_cntrl_reg != TPS65218_DCDC2))
return 1;
/* set voltage level */
if (tps65218_reg_write(TPS65218_PROT_LEVEL_2, dc_cntrl_reg, volt_sel,
TPS65218_MASK_ALL_BITS))
return 1;
/* set GO bit to initiate voltage transition */
if (tps65218_reg_write(TPS65218_PROT_LEVEL_2, TPS65218_SLEW,
TPS65218_DCDC_GO, TPS65218_DCDC_GO))
return 1;
return 0;
}
/**
* tps65218_toggle_fseal() - Perform the sequence that toggles the FSEAL bit.
*
* @return: 0 on success, -EBADE if the sequence was broken
*/
int tps65218_toggle_fseal(void)
{
if (tps65218_reg_write(TPS65218_PROT_LEVEL_NONE, TPS65218_PASSWORD,
0xb1, TPS65218_MASK_ALL_BITS))
return -EBADE;
if (tps65218_reg_write(TPS65218_PROT_LEVEL_NONE, TPS65218_PASSWORD,
0xfe, TPS65218_MASK_ALL_BITS))
return -EBADE;
if (tps65218_reg_write(TPS65218_PROT_LEVEL_NONE, TPS65218_PASSWORD,
0xa3, TPS65218_MASK_ALL_BITS))
return -EBADE;
return 0;
}
/**
* tps65218_lock_fseal() - Perform the sequence that locks the FSEAL bit to 1.
*
* The FSEAL bit prevents the PMIC from turning off DCDC5 and DCDC6. It can be
* toggled at most 3 times: 0->1, 1->0, and finally 0->1. After the third switch
* its value is locked and can only be reset by powering off the PMIC entirely.
*
* @return: 0 on success, -EBADE if the sequence was broken
*/
int tps65218_lock_fseal(void)
{
int i;
for (i = 0; i < 3; i++)
if (tps65218_toggle_fseal())
return -EBADE;
return 0;
}
int power_tps65218_init(unsigned char bus)
{
static const char name[] = "TPS65218_PMIC";
struct pmic *p = pmic_alloc();
if (!p) {
printf("%s: POWER allocation error!\n", __func__);
return -ENOMEM;
}
p->name = name;
p->interface = PMIC_I2C;
p->number_of_regs = TPS65218_PMIC_NUM_OF_REGS;
p->hw.i2c.addr = TPS65218_CHIP_PM;
p->hw.i2c.tx_num = 1;
p->bus = bus;
return 0;
}
|
