1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
|
/*
* (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Andreas Heppel <aheppel@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* Initialisation of the PCI-to-ISA bridge and disabling the BIOS
* write protection (for flash) in function 0 of the chip.
* Enabling function 1 (IDE controller of the chip.
*/
#include <common.h>
#include <config.h>
#include <asm/io.h>
#include <pci.h>
#include <w83c553f.h>
#define out8(addr,val) do { \
out_8((u8*) (addr),(val)); udelay(1); \
} while (0)
#define out16(addr,val) do { \
out_be16((u16*) (addr),(val)); udelay(1); \
} while (0)
extern uint ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
void initialise_pic(void);
void initialise_dma(void);
void initialise_w83c553f(void)
{
pci_dev_t devbusfn;
unsigned char reg8;
unsigned short reg16;
unsigned int reg32;
devbusfn = pci_find_device(W83C553F_VID, W83C553F_DID, 0);
if (devbusfn == -1)
{
printf("Error: Cannot find W83C553F controller on any PCI bus.");
return;
}
pci_read_config_word(devbusfn, PCI_COMMAND, ®16);
reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
pci_write_config_word(devbusfn, PCI_COMMAND, reg16);
pci_read_config_byte(devbusfn, WINBOND_IPADCR, ®8);
/* 16 MB ISA memory space */
reg8 |= (IPADCR_IPATOM4 | IPADCR_IPATOM5 | IPADCR_IPATOM6 | IPADCR_IPATOM7);
reg8 &= ~IPADCR_MBE512;
pci_write_config_byte(devbusfn, WINBOND_IPADCR, reg8);
pci_read_config_byte(devbusfn, WINBOND_CSCR, ®8);
/* switch off BIOS write protection */
reg8 |= CSCR_UBIOSCSE;
reg8 &= ~CSCR_BIOSWP;
pci_write_config_byte(devbusfn, WINBOND_CSCR, reg8);
/*
* Interrupt routing:
* - IDE -> IRQ 9/0
* - INTA -> IRQ 10
* - INTB -> IRQ 11
* - INTC -> IRQ 14
* - INTD -> IRQ 15
*/
pci_write_config_byte(devbusfn, WINBOND_IDEIRCR, 0x90);
pci_write_config_word(devbusfn, WINBOND_PCIIRCR, 0xABEF);
/*
* Read IDE bus offsets from function 1 device.
* We must unmask the LSB indicating that ist is an IO address.
*/
devbusfn |= PCI_BDF(0,0,1);
/*
* Switch off legacy IRQ for IDE and IDE port 1.
*/
pci_write_config_byte(devbusfn, 0x09, 0x8F);
pci_read_config_dword(devbusfn, WINDOND_IDECSR, ®32);
reg32 &= ~(IDECSR_LEGIRQ | IDECSR_P1EN | IDECSR_P1F16);
pci_write_config_dword(devbusfn, WINDOND_IDECSR, reg32);
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_0, &ide_bus_offset[0]);
ide_bus_offset[0] &= ~1;
#if CONFIG_SYS_IDE_MAXBUS > 1
pci_read_config_dword(devbusfn, PCI_BASE_ADDRESS_2, &ide_bus_offset[1]);
ide_bus_offset[1] &= ~1;
#endif
/*
* Enable function 1, IDE -> busmastering and IO space access
*/
pci_read_config_word(devbusfn, PCI_COMMAND, ®16);
reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO;
pci_write_config_word(devbusfn, PCI_COMMAND, reg16);
/*
* Initialise ISA interrupt controller
*/
initialise_pic();
/*
* Initialise DMA controller
*/
initialise_dma();
}
void initialise_pic(void)
{
out8(W83C553F_PIC1_ICW1, 0x11);
out8(W83C553F_PIC1_ICW2, 0x08);
out8(W83C553F_PIC1_ICW3, 0x04);
out8(W83C553F_PIC1_ICW4, 0x01);
out8(W83C553F_PIC1_OCW1, 0xfb);
out8(W83C553F_PIC1_ELC, 0x20);
out8(W83C553F_PIC2_ICW1, 0x11);
out8(W83C553F_PIC2_ICW2, 0x08);
out8(W83C553F_PIC2_ICW3, 0x02);
out8(W83C553F_PIC2_ICW4, 0x01);
out8(W83C553F_PIC2_OCW1, 0xff);
out8(W83C553F_PIC2_ELC, 0xce);
out8(W83C553F_TMR1_CMOD, 0x74);
out8(W83C553F_PIC2_OCW1, 0x20);
out8(W83C553F_PIC1_OCW1, 0x20);
out8(W83C553F_PIC2_OCW1, 0x2b);
out8(W83C553F_PIC1_OCW1, 0x2b);
}
void initialise_dma(void)
{
unsigned int channel;
unsigned int rvalue1, rvalue2;
/* perform a H/W reset of the devices */
out8(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00);
out16(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000);
/* initialise all channels to a sane state */
for (channel = 0; channel < 4; channel++) {
/*
* dependent upon the channel, setup the specifics:
*
* demand
* address-increment
* autoinitialize-disable
* verify-transfer
*/
switch (channel) {
case 0:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL);
break;
case 1:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY);
break;
case 2:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY);
break;
case 3:
rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY);
rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY);
break;
default:
rvalue1 = 0x00;
rvalue2 = 0x00;
break;
}
/* write to write mode registers */
out8(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF);
out16(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF);
}
/* enable all channels */
out8(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00);
out16(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000);
/*
* initialize the global DMA configuration
*
* DACK# active low
* DREQ active high
* fixed priority
* channel group enable
*/
out8(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00);
out16(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000);
}
|
