summaryrefslogtreecommitdiff
path: root/drivers/block/sata_ceva.c
blob: 9b5466483aa42adec35ab0a3adabc686e7efd10f (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
/*
 * (C) Copyright 2015 - 2016 Xilinx, Inc.
 * Michal Simek <michal.simek@xilinx.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#include <common.h>
#include <dm.h>
#include <netdev.h>
#include <ahci.h>
#include <scsi.h>
#include <asm/arch/hardware.h>

#include <asm/io.h>

/* Vendor Specific Register Offsets */
#define AHCI_VEND_PCFG  0xA4
#define AHCI_VEND_PPCFG 0xA8
#define AHCI_VEND_PP2C  0xAC
#define AHCI_VEND_PP3C  0xB0
#define AHCI_VEND_PP4C  0xB4
#define AHCI_VEND_PP5C  0xB8
#define AHCI_VEND_PAXIC 0xC0
#define AHCI_VEND_PTC   0xC8

/* Vendor Specific Register bit definitions */
#define PAXIC_ADBW_BW64 0x1
#define PAXIC_MAWIDD	(1 << 8)
#define PAXIC_MARIDD	(1 << 16)
#define PAXIC_OTL	(0x4 << 20)

#define PCFG_TPSS_VAL	(0x32 << 16)
#define PCFG_TPRS_VAL	(0x2 << 12)
#define PCFG_PAD_VAL	0x2

#define PPCFG_TTA	0x1FFFE
#define PPCFG_PSSO_EN	(1 << 28)
#define PPCFG_PSS_EN	(1 << 29)
#define PPCFG_ESDF_EN	(1 << 31)

#define PP2C_CIBGMN	0x0F
#define PP2C_CIBGMX	(0x25 << 8)
#define PP2C_CIBGN	(0x18 << 16)
#define PP2C_CINMP	(0x29 << 24)

#define PP3C_CWBGMN	0x04
#define PP3C_CWBGMX	(0x0B << 8)
#define PP3C_CWBGN	(0x08 << 16)
#define PP3C_CWNMP	(0x0F << 24)

#define PP4C_BMX	0x0a
#define PP4C_BNM	(0x08 << 8)
#define PP4C_SFD	(0x4a << 16)
#define PP4C_PTST	(0x06 << 24)

#define PP5C_RIT	0x60216
#define PP5C_RCT	(0x7f0 << 20)

#define PTC_RX_WM_VAL	0x40
#define PTC_RSVD	(1 << 27)

#define PORT0_BASE	0x100
#define PORT1_BASE	0x180

/* Port Control Register Bit Definitions */
#define PORT_SCTL_SPD_GEN3	(0x3 << 4)
#define PORT_SCTL_SPD_GEN2	(0x2 << 4)
#define PORT_SCTL_SPD_GEN1	(0x1 << 4)
#define PORT_SCTL_IPM		(0x3 << 8)

#define PORT_BASE	0x100
#define PORT_OFFSET	0x80
#define NR_PORTS	2
#define DRV_NAME	"ahci-ceva"
#define CEVA_FLAG_BROKEN_GEN2	1

static int ceva_init_sata(ulong mmio)
{
	ulong tmp;
	int i;

	/*
	 * AXI Data bus width to 64
	 * Set Mem Addr Read, Write ID for data transfers
	 * Transfer limit to 72 DWord
	 */
	tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD | PAXIC_MARIDD | PAXIC_OTL;
	writel(tmp, mmio + AHCI_VEND_PAXIC);

	/* Set AHCI Enable */
	tmp = readl(mmio + HOST_CTL);
	tmp |= HOST_AHCI_EN;
	writel(tmp, mmio + HOST_CTL);

	for (i = 0; i < NR_PORTS; i++) {
		/* TPSS TPRS scalars, CISE and Port Addr */
		tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
		writel(tmp, mmio + AHCI_VEND_PCFG);

		/* Port Phy Cfg register enables */
		tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
		writel(tmp, mmio + AHCI_VEND_PPCFG);

		/* Rx Watermark setting  */
		tmp = PTC_RX_WM_VAL | PTC_RSVD;
		writel(tmp, mmio + AHCI_VEND_PTC);

		/* Default to Gen 2 Speed and Gen 1 if Gen2 is broken */
		tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
		writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
	}
	return 0;
}

static int sata_ceva_probe(struct udevice *dev)
{
	struct scsi_platdata *plat = dev_get_platdata(dev);

	ceva_init_sata(plat->base);
	return 0;
}

static const struct udevice_id sata_ceva_ids[] = {
	{ .compatible = "ceva,ahci-1v84" },
	{ }
};

static int sata_ceva_ofdata_to_platdata(struct udevice *dev)
{
	struct scsi_platdata *plat = dev_get_platdata(dev);

	plat->base = dev_get_addr(dev);
	if (plat->base == FDT_ADDR_T_NONE)
		return -EINVAL;

	/* Hardcode number for ceva sata controller */
	plat->max_lun = 1; /* Actually two but untested */
	plat->max_id = 2;

	return 0;
}

U_BOOT_DRIVER(ceva_host_blk) = {
	.name = "ceva_sata",
	.id = UCLASS_SCSI,
	.of_match = sata_ceva_ids,
	.probe = sata_ceva_probe,
	.ofdata_to_platdata = sata_ceva_ofdata_to_platdata,
	.platdata_auto_alloc_size = sizeof(struct scsi_platdata),
};