1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
|
/*
* (C) Copyright 2008
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ioports.h>
#include <mpc8260.h>
#include "tqm8272.h"
/* UPM pattern for bus clock = 66.7 MHz */
static const uint upmTable67[] =
{
/* Offset UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0fa3f100, 0x0fa3b000, 0x0fa33100, 0x0fa33000,
/* 0x04 */ 0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
/* UPM Read Burst RAM array entry -> unused */
/* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> unused */
/* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
/* 0x18 */ 0x00a3fc00, 0x00a3fc00, 0x00a3fc00, 0x00a3fc00,
/* 0x1C */ 0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* UPM pattern for bus clock = 100 MHz */
static const uint upmTable100[] =
{
/* Offset UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0fa3f200, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
/* 0x04 */ 0x0fa33000, 0x0fa33004, 0xfffffc01, 0xfffffc00,
/* UPM Read Burst RAM array entry -> unused */
/* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> unused */
/* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
/* 0x18 */ 0x00a3ff00, 0x00a3fc00, 0x00a3fc00, 0x0fa3fc00,
/* 0x1C */ 0x0fa3fc00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
/* UPM pattern for bus clock = 133.3 MHz */
static const uint upmTable133[] =
{
/* Offset UPM Read Single RAM array entry -> NAND Read Data */
/* 0x00 */ 0x0fa3f300, 0x0fa3b000, 0x0fa33300, 0x0fa33000,
/* 0x04 */ 0x0fa33200, 0x0fa33004, 0xfffffc01, 0xfffffc00,
/* UPM Read Burst RAM array entry -> unused */
/* 0x08 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x0C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Read Burst RAM array entry -> unused */
/* 0x10 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x14 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* UPM Write Single RAM array entry -> NAND Write Data, ADDR and CMD */
/* 0x18 */ 0x00a3ff00, 0x00a3fc00, 0x00a3fd00, 0x0fa3fc00,
/* 0x1C */ 0x0fa3fd00, 0x0fa3fc04, 0xfffffc01, 0xfffffc00,
/* UPM Write Burst RAM array entry -> unused */
/* 0x20 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x24 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x28 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x2C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Refresh Timer RAM array entry -> unused */
/* 0x30 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x34 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
/* 0x38 */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
/* UPM Exception RAM array entry -> unsused */
/* 0x3C */ 0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
};
static int chipsel = 0;
#if defined(CONFIG_CMD_NAND)
#include <nand.h>
#include <linux/mtd/mtd.h>
static u8 hwctl = 0;
static void upmnand_write_byte(struct mtd_info *mtdinfo, u_char byte)
{
struct nand_chip *this = mtdinfo->priv;
ulong base = (ulong) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
if (hwctl & 0x1) {
WRITE_NAND_UPM(byte, base, CONFIG_SYS_NAND_UPM_WRITE_CMD_OFS);
} else if (hwctl & 0x2) {
WRITE_NAND_UPM(byte, base, CONFIG_SYS_NAND_UPM_WRITE_ADDR_OFS);
} else {
WRITE_NAND(byte, base);
}
}
static void upmnand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
if (ctrl & NAND_CTRL_CHANGE) {
if ( ctrl & NAND_CLE )
hwctl |= 0x1;
else
hwctl &= ~0x1;
if ( ctrl & NAND_ALE )
hwctl |= 0x2;
else
hwctl &= ~0x2;
}
if (cmd != NAND_CMD_NONE)
upmnand_write_byte (mtd, cmd);
}
static u_char upmnand_read_byte(struct mtd_info *mtdinfo)
{
struct nand_chip *this = mtdinfo->priv;
ulong base = (ulong) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
return READ_NAND(base);
}
static int tqm8272_dev_ready(struct mtd_info *mtdinfo)
{
/* constant delay (see also tR in the datasheet) */
udelay(12); \
return 1;
}
#ifndef CONFIG_NAND_SPL
static void tqm8272_read_buf(struct mtd_info *mtdinfo, uint8_t *buf, int len)
{
struct nand_chip *this = mtdinfo->priv;
unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
int i;
for (i = 0; i< len; i++)
buf[i] = *base;
}
static void tqm8272_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
{
struct nand_chip *this = mtdinfo->priv;
unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
int i;
for (i = 0; i< len; i++)
*base = buf[i];
}
static int tqm8272_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len)
{
struct nand_chip *this = mtdinfo->priv;
unsigned char *base = (unsigned char *) (this->IO_ADDR_W + chipsel * CONFIG_SYS_NAND_CS_DIST);
int i;
for (i = 0; i < len; i++)
if (buf[i] != *base)
return -1;
return 0;
}
#endif /* #ifndef CONFIG_NAND_SPL */
void board_nand_select_device(struct nand_chip *nand, int chip)
{
chipsel = chip;
}
int board_nand_init(struct nand_chip *nand)
{
static int UpmInit = 0;
volatile immap_t * immr = (immap_t *)CONFIG_SYS_IMMR;
volatile memctl8260_t *memctl = &immr->im_memctl;
if (hwinf.nand == 0) return -1;
/* Setup the UPM */
if (UpmInit == 0) {
switch (hwinf.busclk_real) {
case 100000000:
upmconfig (UPMB, (uint *) upmTable100,
sizeof (upmTable100) / sizeof (uint));
break;
case 133333333:
upmconfig (UPMB, (uint *) upmTable133,
sizeof (upmTable133) / sizeof (uint));
break;
default:
upmconfig (UPMB, (uint *) upmTable67,
sizeof (upmTable67) / sizeof (uint));
break;
}
UpmInit = 1;
}
/* Setup the memctrl */
memctl->memc_or3 = CONFIG_SYS_NAND_OR;
memctl->memc_br3 = CONFIG_SYS_NAND_BR;
memctl->memc_mbmr = (MxMR_OP_NORM);
nand->ecc.mode = NAND_ECC_SOFT;
nand->cmd_ctrl = upmnand_hwcontrol;
nand->read_byte = upmnand_read_byte;
nand->dev_ready = tqm8272_dev_ready;
#ifndef CONFIG_NAND_SPL
nand->write_buf = tqm8272_write_buf;
nand->read_buf = tqm8272_read_buf;
nand->verify_buf = tqm8272_verify_buf;
#endif
/*
* Select required NAND chip
*/
board_nand_select_device(nand, 0);
return 0;
}
#endif
|
