1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
|
/*
* K2G EVM : Board initialization
*
* (C) Copyright 2015
* Texas Instruments Incorporated, <www.ti.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/clock.h>
#include <asm/ti-common/keystone_net.h>
#include <asm/arch/psc_defs.h>
#include <asm/arch/mmc_host_def.h>
#include "mux-k2g.h"
#define SYS_CLK 24000000
unsigned int external_clk[ext_clk_count] = {
[sys_clk] = SYS_CLK,
[pa_clk] = SYS_CLK,
[tetris_clk] = SYS_CLK,
[ddr3a_clk] = SYS_CLK,
[uart_clk] = SYS_CLK,
};
static int arm_speeds[DEVSPEED_NUMSPDS] = {
SPD400,
SPD600,
SPD800,
SPD900,
SPD1000,
SPD900,
SPD800,
SPD600,
SPD400,
SPD200,
};
static int dev_speeds[DEVSPEED_NUMSPDS] = {
SPD600,
SPD800,
SPD900,
SPD1000,
SPD900,
SPD800,
SPD600,
SPD400,
};
static struct pll_init_data main_pll_config[NUM_SPDS] = {
[SPD400] = {MAIN_PLL, 100, 3, 2},
[SPD600] = {MAIN_PLL, 300, 6, 2},
[SPD800] = {MAIN_PLL, 200, 3, 2},
[SPD900] = {TETRIS_PLL, 75, 1, 2},
[SPD1000] = {TETRIS_PLL, 250, 3, 2},
};
static struct pll_init_data tetris_pll_config[NUM_SPDS] = {
[SPD200] = {TETRIS_PLL, 250, 3, 10},
[SPD400] = {TETRIS_PLL, 100, 1, 6},
[SPD600] = {TETRIS_PLL, 100, 1, 4},
[SPD800] = {TETRIS_PLL, 400, 3, 4},
[SPD900] = {TETRIS_PLL, 75, 1, 2},
[SPD1000] = {TETRIS_PLL, 250, 3, 2},
};
static struct pll_init_data uart_pll_config = {UART_PLL, 64, 1, 4};
static struct pll_init_data nss_pll_config = {NSS_PLL, 250, 3, 2};
static struct pll_init_data ddr3_pll_config = {DDR3A_PLL, 250, 3, 10};
struct pll_init_data *get_pll_init_data(int pll)
{
int speed;
struct pll_init_data *data = NULL;
switch (pll) {
case MAIN_PLL:
speed = get_max_dev_speed(dev_speeds);
data = &main_pll_config[speed];
break;
case TETRIS_PLL:
speed = get_max_arm_speed(arm_speeds);
data = &tetris_pll_config[speed];
break;
case NSS_PLL:
data = &nss_pll_config;
break;
case UART_PLL:
data = &uart_pll_config;
break;
case DDR3_PLL:
data = &ddr3_pll_config;
break;
default:
data = NULL;
}
return data;
}
s16 divn_val[16] = {
-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1
};
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
if (psc_enable_module(KS2_LPSC_MMC)) {
printf("%s module enabled failed\n", __func__);
return -1;
}
omap_mmc_init(0, 0, 0, -1, -1);
omap_mmc_init(1, 0, 0, -1, -1);
return 0;
}
#endif
#ifdef CONFIG_BOARD_EARLY_INIT_F
static void k2g_reset_mux_config(void)
{
/* Unlock the reset mux register */
clrbits_le32(KS2_RSTMUX8, RSTMUX_LOCK8_MASK);
/* Configure BOOTCFG_RSTMUX8 for WDT event to cause a device reset */
clrsetbits_le32(KS2_RSTMUX8, RSTMUX_OMODE8_MASK,
RSTMUX_OMODE8_DEV_RESET << RSTMUX_OMODE8_SHIFT);
/* lock the reset mux register to prevent any spurious writes. */
setbits_le32(KS2_RSTMUX8, RSTMUX_LOCK8_MASK);
}
int board_early_init_f(void)
{
init_plls();
k2g_mux_config();
k2g_reset_mux_config();
/* deassert FLASH_HOLD */
clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
BIT(9));
setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET,
BIT(9));
return 0;
}
#endif
#ifdef CONFIG_SPL_BUILD
void spl_init_keystone_plls(void)
{
init_plls();
}
#endif
#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
struct eth_priv_t eth_priv_cfg[] = {
{
.int_name = "K2G_EMAC",
.rx_flow = 0,
.phy_addr = 0,
.slave_port = 1,
.sgmii_link_type = SGMII_LINK_MAC_PHY,
.phy_if = PHY_INTERFACE_MODE_RGMII,
},
};
int get_num_eth_ports(void)
{
return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
}
#endif
|
