1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
|
/*
* Board specific setup info
*
* (C) Copyright 2004 Ales Jindra <jindra@2n.cz>
* (C) Copyright 2005 Ladislav Michl <michl@2n.cz>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <version.h>
_TEXT_BASE:
.word TEXT_BASE /* SDRAM load addr from config.mk */
OMAP5910_LPG1_BASE: .word 0xfffbd000
OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
OMAP5910_MPU_TC_BASE: .word 0xfffecc00
OMAP5910_MPU_CLKM_BASE: .word 0xfffece00
OMAP5910_ULPD_PWR_MNG_BASE: .word 0xfffe0800
OMAP5910_DPLL1_BASE: .word 0xfffecf00
OMAP5910_GPIO_BASE: .word 0xfffce000
OMAP5910_MPU_WD_TIMER_BASE: .word 0xfffec800
OMAP5910_MPUI_BASE: .word 0xfffec900
_OMAP5910_ARM_CKCTL: .word OMAP5910_ARM_CKCTL
_OMAP5910_ARM_EN_CLK: .word OMAP5910_ARM_EN_CLK
OMAP5910_MPUI_CTRL: .word 0x0000ff1b
VAL_EMIFS_CS0_CONFIG: .word 0x00009090
VAL_EMIFS_CS1_CONFIG: .word 0x00003031
VAL_EMIFS_CS2_CONFIG: .word 0x0000a0a1
VAL_EMIFS_CS3_CONFIG: .word 0x0000c0c0
VAL_EMIFS_DYN_WAIT: .word 0x00000000
/* autorefresh counter 0x246 ((64000000/13.4)-400)/8192) */
/* SLRF SD_RET ARE SDRAM_TYPE ARCV SDRAM_FREQUENCY PWD CLK */
#if (PHYS_SDRAM_1_SIZE == SZ_32M)
VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xf << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
#else
VAL_EMIFF_SDRAM_CONFIG: .word ((0 << 0) | (0 << 1) | (3 << 2) | (0xd << 4) | (0x246 << 8) | (0 << 24) | (0 << 26) | (0 << 27))
#endif
VAL_EMIFF_SDRAM_CONFIG2: .word 0x00000003
VAL_EMIFF_MRS: .word 0x00000037
/*
* GPIO04 - Green LED (Red LED is connected to LED Pulse Generator)
* GPIO07 - LAN91C111 reset
*/
GPIO_DIRECTION:
.word 0x0000ff6f
/*
* Disable everything (green LED is connected via invertor)
*/
GPIO_OUTPUT:
.word 0x00000010
MUX_CONFIG_BASE:
.word 0xfffe1000
MUX_CONFIG_VALUES:
.align 4
.word 0x00000000 @ FUNC_MUX_CTRL_0
.word 0x00000000 @ FUNC_MUX_CTRL_1
.word 0x00000000 @ FUNC_MUX_CTRL_2
.word 0x00000000 @ FUNC_MUX_CTRL_3
.word 0x00000000 @ FUNC_MUX_CTRL_4
.word 0x02080480 @ FUNC_MUX_CTRL_5
.word 0x0100001c @ FUNC_MUX_CTRL_6
.word 0x0004800b @ FUNC_MUX_CTRL_7
.word 0x10001200 @ FUNC_MUX_CTRL_8
.word 0x01201012 @ FUNC_MUX_CTRL_9
.word 0x02082248 @ FUNC_MUX_CTRL_A
.word 0x00000248 @ FUNC_MUX_CTRL_B
.word 0x12240000 @ FUNC_MUX_CTRL_C
.word 0x00002000 @ FUNC_MUX_CTRL_D
.word 0x00000000 @ PULL_DWN_CTRL_0
.word 0x00000800 @ PULL_DWN_CTRL_1
.word 0x01801000 @ PULL_DWN_CTRL_2
.word 0x00000000 @ PULL_DWN_CTRL_3
.word 0x00000000 @ GATE_INH_CTRL_0
.word 0x00000000 @ VOLTAGE_CTRL_0
.word 0x00000000 @ TEST_DBG_CTRL_0
.word 0x00000006 @ MOD_CONF_CTRL_0
.word 0x0000eaef @ COMP_MODE_CTRL_0
MUX_CONFIG_OFFSETS:
.align 1
.byte 0x00 @ FUNC_MUX_CTRL_0
.byte 0x04 @ FUNC_MUX_CTRL_1
.byte 0x08 @ FUNC_MUX_CTRL_2
.byte 0x10 @ FUNC_MUX_CTRL_3
.byte 0x14 @ FUNC_MUX_CTRL_4
.byte 0x18 @ FUNC_MUX_CTRL_5
.byte 0x1c @ FUNC_MUX_CTRL_6
.byte 0x20 @ FUNC_MUX_CTRL_7
.byte 0x24 @ FUNC_MUX_CTRL_8
.byte 0x28 @ FUNC_MUX_CTRL_9
.byte 0x2c @ FUNC_MUX_CTRL_A
.byte 0x30 @ FUNC_MUX_CTRL_B
.byte 0x34 @ FUNC_MUX_CTRL_C
.byte 0x38 @ FUNC_MUX_CTRL_D
.byte 0x40 @ PULL_DWN_CTRL_0
.byte 0x44 @ PULL_DWN_CTRL_1
.byte 0x48 @ PULL_DWN_CTRL_2
.byte 0x4c @ PULL_DWN_CTRL_3
.byte 0x50 @ GATE_INH_CTRL_0
.byte 0x60 @ VOLTAGE_CTRL_0
.byte 0x70 @ TEST_DBG_CTRL_0
.byte 0x80 @ MOD_CONF_CTRL_0
.byte 0x0c @ COMP_MODE_CTRL_0
.byte 0xff
.globl lowlevel_init
lowlevel_init:
/* Improve performance a bit... */
mrc p15, 0, r1, c0, c0, 0 @ read C15 ID register
mrc p15, 0, r1, c0, c0, 1 @ read C15 Cache information register
mrc p15, 0, r1, c1, c0, 0 @ read C15 Control register
orr r1, r1, #0x1000 @ enable I-cache, map interrupt vector 0xffff0000
mcr p15, 0, r1, c1, c0, 0 @ write C15 Control register
mov r1, #0x00
mcr p15, 0, r1, c7, c5, 0 @ Flush I-cache
nop
nop
nop
nop
/* Setup clocking mode */
ldr r0, OMAP5910_MPU_CLKM_BASE @ prepare base of CLOCK unit
ldrh r1, [r0, #0x18] @ get reset status
bic r1, r1, #(7 << 11) @ clear clock select
orr r1, r1, #(2 << 11) @ set synchronous scalable
mov r2, #0 @ set wait counter to 100 clock cycles
icache_loop:
cmp r2, #0x01
streqh r1, [r0, #0x18]
add r2, r2, #0x01
cmp r2, #0x10
bne icache_loop
nop
/* Setup clock divisors */
ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
ldr r1, _OMAP5910_ARM_CKCTL
orr r1, r1, #0x2000 @ enable DSP clock
strh r1, [r0, #0x00] @ setup clock divisors
/* Setup DPLL to generate requested freq */
ldr r0, OMAP5910_DPLL1_BASE @ base of DPLL1 register
mov r1, #0x0010 @ set PLL_ENABLE
orr r1, r1, #0x2000 @ set IOB to new locking
orr r1, r1, #(OMAP5910_DPLL_MUL << 7) @ setup multiplier CLKREF
orr r1, r1, #(OMAP5910_DPLL_DIV << 5) @ setup divider CLKREF
strh r1, [r0] @ write
locking:
ldrh r1, [r0] @ get DPLL value
tst r1, #0x01
beq locking @ while LOCK not set
/* Enable clock */
ldr r0, OMAP5910_MPU_CLKM_BASE @ base of CLOCK unit
mov r1, #(1 << 10) @ disable idle mode do not check
@ nWAKEUP pin, other remain active
strh r1, [r0, #0x04]
ldr r1, _OMAP5910_ARM_EN_CLK
strh r1, [r0, #0x08]
mov r1, #0x003f @ FLASH.RP not enabled in idle and
@ max delayed ( 32 x CLKIN )
strh r1, [r0, #0x0c]
/* Configure 5910 pins functions to match our board. */
ldr r0, MUX_CONFIG_BASE
adr r1, MUX_CONFIG_VALUES
adr r2, MUX_CONFIG_OFFSETS
next_mux_cfg:
ldrb r3, [r2], #1
ldr r4, [r1], #4
cmp r3, #0xff
strne r4, [r0, r3]
bne next_mux_cfg
/* Configure GPIO pins (also disables Green LED) */
ldr r0, OMAP5910_GPIO_BASE
ldr r1, GPIO_OUTPUT
strh r1, [r0, #0x04]
ldr r1, GPIO_DIRECTION
strh r1, [r0, #0x08]
/* EnablePeripherals */
ldr r0, OMAP5910_MPU_CLKM_BASE @ CLOCK unit
mov r1, #0x0001 @ Peripheral enable
strh r1, [r0, #0x14]
/* Program LED Pulse Generator */
ldr r0, OMAP5910_LPG1_BASE @ 1st LED Pulse Generator
mov r1, #0x7F @ Set obscure frequency in
strb r1, [r0, #0x00] @ LCR
mov r1, #0x01 @ Enable clock (CLK_EN) in
strb r1, [r0, #0x04] @ PMR
/* TIPB Lock UART1 */
ldr r0, OMAP5910_TIPB_SWITCHES_BASE @ prepare base of TIPB switches
mov r1, #1 @ ARM allocated
strh r1, [r0,#0x04] @ clear IRQ line and status bits
strh r1, [r0,#0x00]
ldrh r1, [r0,#0x04]
/* Disable watchdog */
ldr r0, OMAP5910_MPU_WD_TIMER_BASE
mov r1, #0xf5
strh r1, [r0, #0x8]
mov r1, #0xa0
strh r1, [r0, #0x8]
/* Enable MCLK */
ldr r0, OMAP5910_ULPD_PWR_MNG_BASE
mov r1, #0x6
strh r1, [r0, #0x34]
strh r1, [r0, #0x34]
/* Setup clock divisors */
ldr r0, OMAP5910_ULPD_PWR_MNG_BASE @ base of ULDPL DPLL1 register
mov r1, #0x0010 @ set PLL_ENABLE
orr r1, r1, #0x2000 @ set IOB to new locking
strh r1, [r0] @ write
ulocking:
ldrh r1, [r0] @ get DPLL value
tst r1, #1
beq ulocking @ while LOCK not set
/* EMIF init */
ldr r0, OMAP5910_MPU_TC_BASE
ldrh r1, [r0, #0x0c] @ EMIFS_CONFIG_REG
bic r1, r1, #0x0c @ pwr down disabled, flash WP
orr r1, r1, #0x01
str r1, [r0, #0x0c]
ldr r1, VAL_EMIFS_CS0_CONFIG
str r1, [r0, #0x10] @ EMIFS_CS0_CONFIG
ldr r1, VAL_EMIFS_CS1_CONFIG
str r1, [r0, #0x14] @ EMIFS_CS1_CONFIG
ldr r1, VAL_EMIFS_CS2_CONFIG
str r1, [r0, #0x18] @ EMIFS_CS2_CONFIG
ldr r1, VAL_EMIFS_CS3_CONFIG
str r1, [r0, #0x1c] @ EMIFS_CS3_CONFIG
ldr r1, VAL_EMIFS_DYN_WAIT
str r1, [r0, #0x40] @ EMIFS_CFG_DYN_WAIT
/* Setup SDRAM */
ldr r1, VAL_EMIFF_SDRAM_CONFIG
str r1, [r0, #0x20] @ EMIFF_SDRAM_CONFIG
ldr r1, VAL_EMIFF_SDRAM_CONFIG2
str r1, [r0, #0x3c] @ EMIFF_SDRAM_CONFIG2
ldr r1, VAL_EMIFF_MRS
str r1, [r0, #0x24] @ EMIFF_MRS
/* SDRAM needs 100us to stabilize */
mov r0, #0x4000
sdelay:
subs r0, r0, #0x1
bne sdelay
/* back to arch calling code */
mov pc, lr
.end
|
