1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
|
/*
* (C) Copyright 2009 DENX Software Engineering
* Author: John Rigby <jrigby@gmail.com>
*
* Based on U-Boot and RedBoot sources for several different i.mx
* platforms.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <asm/macro.h>
#include <asm/arch/macro.h>
.macro init_clocks
/*
* clocks
*
* first enable CLKO debug output
* 0x40000000 enables the debug CLKO signal
* 0x05000000 sets CLKO divider to 6
* 0x00600000 makes CLKO parent clk the USB clk
*/
write32 0x53f80064, 0x45600000
/* CCTL: ARM = 399 MHz, AHB = 133 MHz */
write32 0x53f80008, 0x20034000
/*
* PCDR2: NFC = 33.25 MHz
* This is required for the NAND Flash of this board, which is a Samsung
* K9F1G08U0B with 25-ns R/W cycle times, in order to make it work with
* the NFC driver in symmetric (i.e. one-cycle) mode.
*/
write32 0x53f80020, 0x01010103
/*
* enable all implemented clocks in all three
* clock control registers
*/
write32 0x53f8000c, 0x1fffffff
write32 0x53f80010, 0xffffffff
write32 0x53f80014, 0xfdfff
.endm
.macro init_ddrtype
/*
* ddr_type is 3.3v SDRAM
*/
write32 0x43fac454, 0x800
.endm
/*
* sdram controller init
*/
.macro init_sdram_bank bankaddr, ctl, cfg
ldr r0, =0xb8001000
ldr r2, =\bankaddr
/*
* reset SDRAM controller
* then wait for initialization to complete
*/
ldr r1, =(1 << 1)
str r1, [r0, #0x10]
1: ldr r3, [r0, #0x10]
tst r3, #(1 << 31)
beq 1b
ldr r1, =0x95728
str r1, [r0, #\cfg] /* config */
ldr r1, =0x92116480 /* control | precharge */
str r1, [r0, #\ctl] /* write command to controller */
str r1, [r2, #0x400] /* command encoded in address */
ldr r1, =0xa2116480 /* auto refresh */
str r1, [r0, #\ctl]
ldrb r3, [r2] /* read dram twice to auto refresh */
ldrb r3, [r2]
ldr r1, =0xb2116480 /* control | load mode */
str r1, [r0, #\ctl] /* write command to controller */
strb r1, [r2, #0x33] /* command encoded in address */
ldr r1, =0x82116480 /* control | normal (0)*/
str r1, [r0, #\ctl] /* write command to controller */
.endm
.globl lowlevel_init
lowlevel_init:
init_aips
init_max
init_m3if
init_clocks
init_sdram_bank 0x80000000, 0x0, 0x4
init_sdram_bank 0x90000000, 0x8, 0xc
mov pc, lr
|
