path: root/board/freescale/mx35_3stack/lowlevel_init.S

/*
 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
 *
 * (C) Copyright 2008-2009 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <config.h>
#include <asm/arch/mx35.h>
#include "board-mx35_3stack.h"

/*
 * return soc version
 * 	0x10:  TO1
 *	0x20:  TO2
 *	0x30:  TO3
 */
.macro check_soc_version ret, tmp
	ldr \tmp, =IIM_BASE_ADDR
	ldr \ret, [\tmp, #IIM_SREV]
	cmp \ret, #0x00
	moveq \tmp, #ROMPATCH_REV
	ldreq \ret, [\tmp]
	moveq \ret, \ret, lsl #4
	addne \ret, \ret, #0x10
.endm

/*
 * L2CC Cache setup/invalidation/disable
 */
.macro init_l2cc
    /* Disable L2 cache first */
    mov r0, #L2CC_BASE_ADDR
    ldr r1, [r0, #L2_CACHE_CTL_REG]
    bic r1, r1, #0x1
    str r1, [r0, #L2_CACHE_CTL_REG]

    /*
     * Configure L2 Cache:
     * - 128k size(16k way)
     * - 8-way associativity
     * - 0 ws TAG/VALID/DIRTY
     * - 4 ws DATA R/W
     */
    ldr r1, [r0, #L2_CACHE_AUX_CTL_REG]
    and r1, r1, #0xFE000000
    ldr r2, =L2CC_AUX_CTL_CONFIG
    orr r1, r1, r2
    str r1, [r0, #L2_CACHE_AUX_CTL_REG]

    /* Workaournd for TO1 DDR issue:WT*/
    check_soc_version r1, r2
    cmp r1, #CHIP_REV_2_0
    ldrlo r1, [r0, #L2_CACHE_DBG_CTL_REG]
    orrlo r1, r1, #2
    strlo r1, [r0, #L2_CACHE_DBG_CTL_REG]

   /* Invalidate L2 */
    mov r1, #0x000000FF
    str r1, [r0, #L2_CACHE_INV_WAY_REG]
1:
    /* Poll Invalidate By Way register */
    ldr r2, [r0, #L2_CACHE_INV_WAY_REG]
    cmp r2, #0
    bne 1b
.endm /* init_l2cc */

/* AIPS setup - Only setup MPROTx registers.
 * The PACR default values are good.*/
.macro init_aips
	/*
	 * Set all MPROTx to be non-bufferable, trusted for R/W,
	 * not forced to user-mode.
	 */
	ldr r0, =AIPS1_BASE_ADDR
	ldr r1, =AIPS_MPR_CONFIG
	str r1, [r0, #0x00]
	str r1, [r0, #0x04]
	ldr r0, =AIPS2_BASE_ADDR
	str r1, [r0, #0x00]
	str r1, [r0, #0x04]

	/*
	 * Clear the on and off peripheral modules Supervisor Protect bit
	 * for SDMA to access them. Did not change the AIPS control registers
	 * (offset 0x20) access type
	 */
	ldr r0, =AIPS1_BASE_ADDR
	ldr r1, =AIPS_OPACR_CONFIG
	str r1, [r0, #0x40]
	str r1, [r0, #0x44]
	str r1, [r0, #0x48]
	str r1, [r0, #0x4C]
	str r1, [r0, #0x50]
	ldr r0, =AIPS2_BASE_ADDR
	str r1, [r0, #0x40]
	str r1, [r0, #0x44]
	str r1, [r0, #0x48]
	str r1, [r0, #0x4C]
	str r1, [r0, #0x50]
.endm /* init_aips */

/* MAX (Multi-Layer AHB Crossbar Switch) setup */
.macro init_max
	ldr r0, =MAX_BASE_ADDR
	/* MPR - priority is M4 > M2 > M3 > M5 > M0 > M1 */
	ldr r1, =MAX_MPR_CONFIG
	str r1, [r0, #0x000]        /* for S0 */
	str r1, [r0, #0x100]        /* for S1 */
	str r1, [r0, #0x200]        /* for S2 */
	str r1, [r0, #0x300]        /* for S3 */
	str r1, [r0, #0x400]        /* for S4 */
	/* SGPCR - always park on last master */
	ldr r1, =MAX_SGPCR_CONFIG
	str r1, [r0, #0x010]        /* for S0 */
	str r1, [r0, #0x110]        /* for S1 */
	str r1, [r0, #0x210]        /* for S2 */
	str r1, [r0, #0x310]        /* for S3 */
	str r1, [r0, #0x410]        /* for S4 */
	/* MGPCR - restore default values */
	ldr r1, =MAX_MGPCR_CONFIG
	str r1, [r0, #0x800]        /* for M0 */
	str r1, [r0, #0x900]        /* for M1 */
	str r1, [r0, #0xA00]        /* for M2 */
	str r1, [r0, #0xB00]        /* for M3 */
	str r1, [r0, #0xC00]        /* for M4 */
	str r1, [r0, #0xD00]        /* for M5 */
.endm /* init_max */

/* M3IF setup */
.macro init_m3if
	/* Configure M3IF registers */
	ldr r1, =M3IF_BASE_ADDR
	/*
	* M3IF Control Register (M3IFCTL)
	* MRRP[0] = L2CC0 not on priority list (0 << 0)	= 0x00000000
	* MRRP[1] = L2CC1 not on priority list (0 << 0)	= 0x00000000
	* MRRP[2] = MBX not on priority list (0 << 0)	= 0x00000000
	* MRRP[3] = MAX1 not on priority list (0 << 0)	= 0x00000000
	* MRRP[4] = SDMA not on priority list (0 << 0)	= 0x00000000
	* MRRP[5] = MPEG4 not on priority list (0 << 0)	= 0x00000000
	* MRRP[6] = IPU1 on priority list (1 << 6)	= 0x00000040
	* MRRP[7] = IPU2 not on priority list (0 << 0)	= 0x00000000
	*						------------
	*						  0x00000040
	*/
	ldr r0, =M3IF_CONFIG
	str r0, [r1]  /* M3IF control reg */
.endm /* init_m3if */

/* To support 133MHz DDR */
.macro  init_drive_strength
/*
	mov r0, #0x2
	ldr r1, =IOMUXC_BASE_ADDR
	add r1, r1, #0x368
        add r2, r1, #0x4C8 - 0x368
1:      str r0, [r1], #4
	cmp r1, r2
        ble 1b
*/
.endm /* init_drive_strength */

/* CPLD on CS5 setup */
.macro init_debug_board
	ldr r0, =DBG_BASE_ADDR
	ldr r1, =DBG_CSCR_U_CONFIG
	str r1, [r0, #0x00]
	ldr r1, =DBG_CSCR_L_CONFIG
	str r1, [r0, #0x04]
	ldr r1, =DBG_CSCR_A_CONFIG
	str r1, [r0, #0x08]
.endm /* init_debug_board */

/* clock setup */
.macro init_clock
	ldr r0, =CCM_BASE_ADDR

        /* default CLKO to 1/32 of the ARM core*/
        ldr r1, [r0, #CLKCTL_COSR]
        bic r1, r1, #0x00000FF00
        bic r1, r1, #0x0000000FF
        mov r2, #0x00006C00
        add r2, r2, #0x67
        orr r1, r1, r2
        str r1, [r0, #CLKCTL_COSR]

        ldr r2, =CCM_CCMR_CONFIG
        str r2, [r0, #CLKCTL_CCMR]

    	check_soc_version r1, r2
	cmp r1, #CHIP_REV_2_0
	ldrhs r3, =CCM_MPLL_399_HZ
	bhs 1f
	ldr r2, [r0, #CLKCTL_PDR0]
        tst r2, #CLKMODE_CONSUMER
        ldrne r3, =CCM_MPLL_532_HZ  /* consumer path*/
        ldreq r3, =CCM_MPLL_399_HZ  /* auto path*/
1:
	str r3, [r0, #CLKCTL_MPCTL]

        ldr r1, =CCM_PPLL_300_HZ
        str r1, [r0, #CLKCTL_PPCTL]

        ldr r1, [r0, #CLKCTL_PDR0]
        orr r1, r1, #0x800000
        str r1, [r0, #CLKCTL_PDR0]

        ldr r1, =CCM_PDR0_CONFIG
        str r1, [r0, #CLKCTL_PDR0]

        ldr r1, [r0, #CLKCTL_CGR0]
        orr r1, r1, #0x00300000
        str r1, [r0, #CLKCTL_CGR0]

        ldr r1, [r0, #CLKCTL_CGR1]
        orr r1, r1, #0x00000C00
        orr r1, r1, #0x00000003
        str r1, [r0, #CLKCTL_CGR1]
.endm /* init_clock */

.macro setup_sdram
        ldr r0, =ESDCTL_BASE_ADDR
        mov r3, #0x2000
        str r3, [r0, #0x0]
        str r3, [r0, #0x8]

	/*ip(r12) has used to save lr register in upper calling*/
        mov fp, lr

	mov r5, #0x00
        mov r2, #0x00
        mov r1, #CSD0_BASE_ADDR
        bl setup_sdram_bank
        cmp r3, #0x0
        orreq r5, r5, #1
        eorne r2, r2, #0x1
        blne setup_sdram_bank

        mov lr, fp

	check_soc_version r3, r4
	cmp r1, #CHIP_REV_2_0
	bhs 1f
	cmp r5, #0
        movne r3, #L2CC_BASE_ADDR
        ldrne r4, [r3, #L2_CACHE_AUX_CTL_REG]
        orrne r4, r4, #0x1000
        strne r4, [r3, #L2_CACHE_AUX_CTL_REG]
1:
        ldr r3, =ESDCTL_DELAY_LINE5
        str r3, [r0, #0x30]
.endm /* setup_sdram */

.section ".text.init", "x"

.globl lowlevel_init
lowlevel_init:
	/* Platform CHIP level init*/
#ifdef TURN_OFF_IMPRECISE_ABORT
	mrs r0, cpsr
	bic r0, r0, #0x100
	msr cpsr, r0
#endif

	mrc 15, 0, r1, c1, c0, 0

#ifndef BRANCH_PREDICTION_ENABLE
	mrc 15, 0, r0, c1, c0, 1
	bic r0, r0, #7
	mcr 15, 0, r0, c1, c0, 1
#else
	mrc 15, 0, r0, c1, c0, 1
	orr r0, r0, #7
	mcr 15, 0, r0, c1, c0, 1
	orr r1, r1, #(1<<11)
#endif

#ifdef UNALIGNED_ACCESS_ENABLE
	orr r1, r1, #(1<<22)
#endif

#ifdef LOW_INT_LATENCY_ENABLE
	orr r1, r1, #(1<<21)
#endif
	mcr 15, 0, r1, c1, c0, 0

	mov r0, #0
#ifdef BRANCH_PREDICTION_ENABLE
	mcr 15, 0, r0, c15, c2, 4
#endif
	mcr 15, 0, r0, c7, c10, 4       /* Drain the write buffer */

	/* initializes very early AIPS, what for?
	 * Then it also initializes Multi-Layer AHB Crossbar Switch,
	 * M3IF */
	/* Also setup the Peripheral Port Remap register inside the core */
	ldr r0, =0x40000015        /* start from AIPS 2GB region */
	mcr p15, 0, r0, c15, c2, 4

	init_l2cc

	init_aips

	init_max

	init_m3if

	init_drive_strength

	cmp pc, #PHYS_SDRAM_1
	blo init_clock_start
	cmp pc, #(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
	blo skip_sdram_setup

init_clock_start:
	init_clock
	init_debug_board
	/*init_sdram*/
	setup_sdram
skip_sdram_setup:
	mov r0, #NFC_BASE_ADDR
	add r1, r0, #NFC_BUF_SIZE
	cmp pc, r0
	movlo pc, lr
	cmp pc, r1
	movhi pc, lr
	/* return from mxc_nand_load */
	/* r12 saved upper lr*/
	b mxc_nand_load

/*
 * r0: ESDCTL control base, r1: sdram slot base
 * r2: DDR type(0:DDR2, 1:MDDR) r3, r4:working base
 */
setup_sdram_bank:
        mov r3, #0xE /*0xA + 0x4*/
        tst r2, #0x1
        orreq r3, r3, #0x300 /*DDR2*/
        str r3, [r0, #0x10]
        bic r3, r3, #0x00A
        str r3, [r0, #0x10]
        beq 2f

        mov r3, #0x20000
1:      subs r3, r3, #1
        bne 1b

2:      tst r2, #0x1
        ldreq r3, =ESDCTL_DDR2_CONFIG
        ldrne r3, =ESDCTL_MDDR_CONFIG
        cmp r1, #CSD1_BASE_ADDR
        strlo r3, [r0, #0x4]
        strhs r3, [r0, #0xC]

        ldr r3, =ESDCTL_0x92220000
        strlo r3, [r0, #0x0]
        strhs r3, [r0, #0x8]
        mov r3, #0xDA
        ldr r4, =ESDCTL_PRECHARGE
        strb r3, [r1, r4]

        tst r2, #0x1
        bne skip_set_mode

        cmp r1, #CSD1_BASE_ADDR
        ldr r3, =ESDCTL_0xB2220000
        strlo r3, [r0, #0x0]
        strhs r3, [r0, #0x8]
        mov r3, #0xDA
        ldr r4, =ESDCTL_DDR2_EMR2
        strb r3, [r1, r4]
        ldr r4, =ESDCTL_DDR2_EMR3
        strb r3, [r1, r4]
        ldr r4, =ESDCTL_DDR2_EN_DLL
        strb r3, [r1, r4]
        ldr r4, =ESDCTL_DDR2_RESET_DLL
        strb r3, [r1, r4]

        ldr r3, =ESDCTL_0x92220000
        strlo r3, [r0, #0x0]
        strhs r3, [r0, #0x8]
        mov r3, #0xDA
        ldr r4, =ESDCTL_PRECHARGE
        strb r3, [r1, r4]

skip_set_mode:
        cmp r1, #CSD1_BASE_ADDR
        ldr r3, =ESDCTL_0xA2220000
        strlo r3, [r0, #0x0]
        strhs r3, [r0, #0x8]
        mov r3, #0xDA
        strb r3, [r1]
        strb r3, [r1]

        ldr r3, =ESDCTL_0xB2220000
        strlo r3, [r0, #0x0]
        strhs r3, [r0, #0x8]
        tst r2, #0x1
        ldreq r4, =ESDCTL_DDR2_MR
        ldrne r4, =ESDCTL_MDDR_MR
       	mov r3, #0xDA
        strb r3, [r1, r4]
        ldreq r4, =ESDCTL_DDR2_OCD_DEFAULT
        streqb r3, [r1, r4]
        ldreq r4, =ESDCTL_DDR2_EN_DLL
        ldrne r4, =ESDCTL_MDDR_EMR
        strb r3, [r1, r4]

        cmp r1, #CSD1_BASE_ADDR
        ldr r3, =ESDCTL_0x82228080
        strlo r3, [r0, #0x0]
        strhs r3, [r0, #0x8]

        tst r2, #0x1
        moveq r4, #0x20000
        movne r4, #0x200
1:      subs r4, r4, #1
        bne 1b

       	str r3, [r1, #0x100]
        ldr r4, [r1, #0x100]
        cmp r3, r4
        movne r3, #1
        moveq r3, #0

        mov pc, lr