path: root/board/esd/ar405/ar405.c

/*
 * (C) Copyright 2001-2004
 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include "ar405.h"
#include <asm/processor.h>
#include <asm/io.h>
#include <command.h>

DECLARE_GLOBAL_DATA_PTR;

extern void lxt971_no_sleep(void);

/* ------------------------------------------------------------------------- */

#if 0
#define FPGA_DEBUG
#endif

/* fpga configuration data - generated by bin2cc */
const unsigned char fpgadata[] = {
#include "fpgadata.c"
};

const unsigned char fpgadata_xl30[] = {
#include "fpgadata_xl30.c"
};

/*
 * include common fpga code (for esd boards)
 */
#include "../common/fpga.c"


int board_early_init_f (void)
{
	int index, len, i;
	int status;

#ifdef FPGA_DEBUG
	/* set up serial port with default baudrate */
	(void) get_clocks ();
	gd->baudrate = CONFIG_BAUDRATE;
	serial_init ();
	console_init_f ();
#endif

	/*
	 * Boot onboard FPGA
	 */
	/* first try 40er image */
	gd->board_type = 40;
	status = fpga_boot ((unsigned char *) fpgadata, sizeof (fpgadata));
	if (status != 0) {
		/* try xl30er image */
		gd->board_type = 30;
		status = fpga_boot ((unsigned char *) fpgadata_xl30, sizeof (fpgadata_xl30));
		if (status != 0) {
			/* booting FPGA failed */
#ifndef FPGA_DEBUG
			/* set up serial port with default baudrate */
			(void) get_clocks ();
			gd->baudrate = CONFIG_BAUDRATE;
			serial_init ();
			console_init_f ();
#endif
			printf ("\nFPGA: Booting failed ");
			switch (status) {
			case ERROR_FPGA_PRG_INIT_LOW:
				printf ("(Timeout: INIT not low after asserting PROGRAM*)\n ");
				break;
			case ERROR_FPGA_PRG_INIT_HIGH:
				printf ("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
				break;
			case ERROR_FPGA_PRG_DONE:
				printf ("(Timeout: DONE not high after programming FPGA)\n ");
				break;
			}

			/* display infos on fpgaimage */
			index = 15;
			for (i = 0; i < 4; i++) {
				len = fpgadata[index];
				printf ("FPGA: %s\n", &(fpgadata[index + 1]));
				index += len + 3;
			}
			putc ('\n');
			/* delayed reboot */
			for (i = 20; i > 0; i--) {
				printf ("Rebooting in %2d seconds \r", i);
				for (index = 0; index < 1000; index++)
					udelay (1000);
			}
			putc ('\n');
			do_reset (NULL, 0, 0, NULL);
		}
	}

	/*
	 * IRQ 0-15  405GP internally generated; active high; level sensitive
	 * IRQ 16    405GP internally generated; active low; level sensitive
	 * IRQ 17-24 RESERVED
	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
	 * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
	 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
	 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
	 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
	 */
	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
	mtdcr (UIC0ER, 0x00000000);	/* disable all ints */
	mtdcr (UIC0CR, 0x00000000);	/* set all to be non-critical */
	mtdcr (UIC0PR, 0xFFFFFF81);	/* set int polarities */
	mtdcr (UIC0TR, 0x10000000);	/* set int trigger levels */
	mtdcr (UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */

	out_be16((void *)0xf03000ec, 0x0fff); /* enable interrupts in fpga */

	return 0;
}

/*
 * Check Board Identity:
 */
int checkboard (void)
{
	int index;
	int len;
	char str[64];
	int i = getenv_f("serial#", str, sizeof (str));
	const unsigned char *fpga;

	puts ("Board: ");

	if (i == -1) {
		puts ("### No HW ID - assuming AR405");
	} else {
		puts(str);
	}

	puts ("\nFPGA:  ");

	/* display infos on fpgaimage */
	if (gd->board_type == 30) {
		fpga = fpgadata_xl30;
	} else {
		fpga = fpgadata;
	}
	index = 15;
	for (i = 0; i < 4; i++) {
		len = fpga[index];
		printf ("%s ", &(fpga[index + 1]));
		index += len + 3;
	}

	putc ('\n');

	/*
	 * Disable sleep mode in LXT971
	 */
	lxt971_no_sleep();

	return 0;
}


#if 1 /* test-only: some internal test routines... */
#define DIGEN	((void *)0xf03000b4) /* u8 */
#define DIGOUT	((void *)0xf03000b0) /* u16 */
#define DIGIN	((void *)0xf03000a0) /* u16 */

/*
 * Some test routines
 */
int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	int i;
	int k;
	int start;
	int end;

	if (argc != 3) {
		puts("Usage: digtest n_start n_end (digtest 0 7)\n");
		return 0;
	}

	start = simple_strtol (argv[1], NULL, 10);
	end = simple_strtol (argv[2], NULL, 10);

	/*
	 * Enable digital outputs
	 */
	out_8(DIGEN, 0x08);

	printf("\nStarting digital In-/Out Test from I/O %d to %d (Cntrl-C to abort)...\n",
	       start, end);

	/*
	 * Set outputs one by one
	 */
	for (;;) {
		for (i=start; i<=end; i++) {
			out_be16(DIGOUT, 0x0001 << i);
			for (k=0; k<200; k++)
				udelay(1000);

			if (in_be16(DIGIN) != (0x0001 << i)) {
				printf("ERROR: OUT=0x%04X, IN=0x%04X\n",
				       0x0001 << i, in_be16(DIGIN));
				return 0;
			}

			/* Abort if ctrl-c was pressed */
			if (ctrlc()) {
				puts("\nAbort\n");
				return 0;
			}
		}
	}

	return 0;
}
U_BOOT_CMD(
	digtest,	3,	1,	do_digtest,
	"Test digital in-/output",
	""
);

#define ERROR_DELTA     256

struct io {
	short val;
	short dummy;
};

int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	short val;
	int i;
	int volt;
	struct io *out;
	struct io *in;

	out = (struct io *)0xf0300090;
	in = (struct io *)0xf0300000;

	i = simple_strtol (argv[1], NULL, 10);

	volt = 0;
	printf("Setting Channel %d to %dV...\n", i, volt);
	out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
	udelay(10000);
	val = in_be16((void *)&(in[i*2].val));
	printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
		return -1;
	}
	val = in_be16((void *)&(in[i*2+1].val));
	printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
		return -1;
	}

	volt = 5;
	printf("Setting Channel %d to %dV...\n", i, volt);
	out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
	udelay(10000);
	val = in_be16((void *)&(in[i*2].val));
	printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
		return -1;
	}
	val = in_be16((void *)&(in[i*2+1].val));
	printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
		return -1;
	}

	volt = 10;
	printf("Setting Channel %d to %dV...\n", i, volt);
	out_be16((void *)&(out[i].val), (volt * 0x7fff) / 10);
	udelay(10000);
	val = in_be16((void *)&(in[i*2].val));
	printf("-> InChannel %d: 0x%04x=%dV\n", i*2, val, (val * 4000) / 0x7fff);
	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
		return -1;
	}
	val = in_be16((void *)&(in[i*2+1].val));
	printf("-> InChannel %d: 0x%04x=%dV\n", i*2+1, val, (val * 4000) / 0x7fff);
	if ((val < ((volt * 0x7fff) / 40) - ERROR_DELTA) ||
	    (val > ((volt * 0x7fff) / 40) + ERROR_DELTA)) {
		printf("ERROR! (min=0x%04x max=0x%04x)\n", ((volt * 0x7fff) / 40) - ERROR_DELTA,
		       ((volt * 0x7fff) / 40) + ERROR_DELTA);
		return -1;
	}

	printf("Channel %d OK!\n", i);

	return 0;
}
U_BOOT_CMD(
	anatest,	2,	1,	do_anatest,
	"Test analog in-/output",
	""
);


int counter = 0;

void cyclicInt(void *ptr)
{
	out_be16((void *)0xf03000e8, 0x0800); /* ack int */
	counter++;
}


int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
	ulong *incin;
	int i;

	incin = (ulong *)0xf0300040;

	/*
	 * Clear inc counter
	 */
	out_be32((void *)&incin[0], 0);
	out_be32((void *)&incin[1], 0);
	out_be32((void *)&incin[2], 0);
	out_be32((void *)&incin[3], 0);

	incin = (ulong *)0xf0300050;

	/*
	 * Inc a little
	 */
	for (i=0; i<10000; i++) {
		switch (i & 0x03) {
		case 0:
			out_8(DIGEN, 0x02);
			break;
		case 1:
			out_8(DIGEN, 0x03);
			break;
		case 2:
			out_8(DIGEN, 0x01);
			break;
		case 3:
			out_8(DIGEN, 0x00);
			break;
		}
		udelay(10);
	}

	printf("Inc 0 = %d\n", in_be32((void *)&incin[0]));
	printf("Inc 1 = %d\n", in_be32((void *)&incin[1]));
	printf("Inc 2 = %d\n", in_be32((void *)&incin[2]));
	printf("Inc 3 = %d\n", in_be32((void *)&incin[3]));

	out_be16((void *)0xf03000e0, 0x0c80-1); /* set counter */
	out_be16((void *)0xf03000ec,
		 in_be16((void *)0xf03000ec) | 0x0800); /* enable int */
	irq_install_handler (30, (interrupt_handler_t *) cyclicInt, NULL);
	printf("counter=%d\n", counter);

	return 0;
}
U_BOOT_CMD(
	inctest,	3,	1,	do_inctest,
	"Test incremental encoder inputs",
	""
);
#endif