1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
|
/*
* Copyright (C) Freescale Semiconductor, Inc. 2007
*
* Author: Scott Wood <scottwood@freescale.com>,
* with some bits from older board-specific PCI initialization.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <pci.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#include <fdt_support.h>
#endif
#include <asm/mpc8349_pci.h>
#define MAX_BUSES 2
DECLARE_GLOBAL_DATA_PTR;
static struct pci_controller pci_hose[MAX_BUSES];
static int pci_num_buses;
static void pci_init_bus(int bus, struct pci_region *reg)
{
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
volatile pot83xx_t *pot = immr->ios.pot;
volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus];
struct pci_controller *hose = &pci_hose[bus];
u32 dev;
u16 reg16;
int i;
if (bus == 1)
pot += 3;
/* Setup outbound translation windows */
for (i = 0; i < 3; i++, reg++, pot++) {
if (reg->size == 0)
break;
hose->regions[i] = *reg;
hose->region_count++;
pot->potar = reg->bus_start >> 12;
pot->pobar = reg->phys_start >> 12;
pot->pocmr = ~(reg->size - 1) >> 12;
if (reg->flags & PCI_REGION_IO)
pot->pocmr |= POCMR_IO;
#ifdef CONFIG_83XX_PCI_STREAMING
else if (reg->flags & PCI_REGION_PREFETCH)
pot->pocmr |= POCMR_SE;
#endif
if (bus == 1)
pot->pocmr |= POCMR_DST;
pot->pocmr |= POCMR_EN;
}
/* Point inbound translation at RAM */
pci_ctrl->pitar1 = 0;
pci_ctrl->pibar1 = 0;
pci_ctrl->piebar1 = 0;
pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
i = hose->region_count++;
hose->regions[i].bus_start = 0;
hose->regions[i].phys_start = 0;
hose->regions[i].size = gd->ram_size;
hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
hose->first_busno = pci_last_busno() + 1;
hose->last_busno = 0xff;
pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
pci_register_hose(hose);
/*
* Write to Command register
*/
reg16 = 0xff;
dev = PCI_BDF(hose->first_busno, 0, 0);
pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16);
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
/*
* Clear non-reserved bits in status register.
*/
pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
#ifdef CONFIG_PCI_SCAN_SHOW
printf("PCI: Bus Dev VenId DevId Class Int\n");
#endif
#ifndef CONFIG_PCISLAVE
/*
* Hose scan.
*/
hose->last_busno = pci_hose_scan(hose);
#endif
}
/*
* The caller must have already set OCCR, and the PCI_LAW BARs
* must have been set to cover all of the requested regions.
*
* If fewer than three regions are requested, then the region
* list is terminated with a region of size 0.
*/
void mpc83xx_pci_init(int num_buses, struct pci_region **reg)
{
volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
int i;
if (num_buses > MAX_BUSES) {
printf("%d PCI buses requsted, %d supported\n",
num_buses, MAX_BUSES);
num_buses = MAX_BUSES;
}
pci_num_buses = num_buses;
/*
* Release PCI RST Output signal.
* Power on to RST high must be at least 100 ms as per PCI spec.
* On warm boots only 1 ms is required, but we play it safe.
*/
udelay(100000);
for (i = 0; i < num_buses; i++)
immr->pci_ctrl[i].gcr = 1;
/*
* RST high to first config access must be at least 2^25 cycles
* as per PCI spec. This could be cut in half if we know we're
* running at 66MHz. This could be insufficiently long if we're
* running the PCI bus at significantly less than 33MHz.
*/
udelay(1020000);
for (i = 0; i < num_buses; i++)
pci_init_bus(i, reg[i]);
}
#ifdef CONFIG_PCISLAVE
#define PCI_FUNCTION_CONFIG 0x44
#define PCI_FUNCTION_CFG_LOCK 0x20
/*
* Unlock the configuration bit so that the host system can begin booting
*
* This should be used after you have:
* 1) Called mpc83xx_pci_init()
* 2) Set up your inbound translation windows to the appropriate size
*/
void mpc83xx_pcislave_unlock(int bus)
{
struct pci_controller *hose = &pci_hose[bus];
u32 dev;
u16 reg16;
/* Unlock configuration lock in PCI function configuration register */
dev = PCI_BDF(hose->first_busno, 0, 0);
pci_hose_read_config_word (hose, dev, PCI_FUNCTION_CONFIG, ®16);
reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
pci_hose_write_config_word (hose, dev, PCI_FUNCTION_CONFIG, reg16);
/* The configuration bit is now unlocked, so we can scan the bus */
hose->last_busno = pci_hose_scan(hose);
}
#endif
#if defined(CONFIG_OF_LIBFDT)
void ft_pci_setup(void *blob, bd_t *bd)
{
int nodeoffset;
int tmp[2];
const char *path;
if (pci_num_buses < 1)
return;
nodeoffset = fdt_path_offset(blob, "/aliases");
if (nodeoffset >= 0) {
path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
if (path) {
tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
do_fixup_by_path(blob, path, "bus-range",
&tmp, sizeof(tmp), 1);
tmp[0] = cpu_to_be32(gd->pci_clk);
do_fixup_by_path(blob, path, "clock-frequency",
&tmp, sizeof(tmp[0]), 1);
}
if (pci_num_buses < 2)
return;
path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
if (path) {
tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
do_fixup_by_path(blob, path, "bus-range",
&tmp, sizeof(tmp), 1);
tmp[0] = cpu_to_be32(gd->pci_clk);
do_fixup_by_path(blob, path, "clock-frequency",
&tmp, sizeof(tmp[0]), 1);
}
}
}
#endif /* CONFIG_OF_LIBFDT */
|
