1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
|
/*
* (C) Copyright 2008
* Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
* mpc512x I/O pin/pad initialization for the ADS5121 board
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/types.h>
#include <asm/io.h>
void iopin_initialize(iopin_t *ioregs_init, int len)
{
short i, j, p;
u32 *reg;
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
reg = (u32 *)&(im->io_ctrl);
if (sizeof(ioregs_init) == 0)
return;
for (i = 0; i < len; i++) {
for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
p < ioregs_init[i].nr_pins; p++, j++) {
if (ioregs_init[i].bit_or)
setbits_be32(reg + j, ioregs_init[i].val);
else
out_be32 (reg + j, ioregs_init[i].val);
}
}
return;
}
void iopin_initialize_bits(iopin_t *ioregs_init, int len)
{
short i, j, p;
u32 *reg, mask;
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
reg = (u32 *)&(im->io_ctrl);
/* iterate over table entries */
for (i = 0; i < len; i++) {
/* iterate over pins within a table entry */
for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
p < ioregs_init[i].nr_pins; p++, j++) {
if (ioregs_init[i].bit_or & IO_PIN_OVER_EACH) {
/* replace all settings at once */
out_be32(reg + j, ioregs_init[i].val);
} else {
/*
* only replace individual parts, but
* REPLACE them instead of just ORing
* them in and "inheriting" previously
* set bits which we don't want
*/
mask = 0;
if (ioregs_init[i].bit_or & IO_PIN_OVER_FMUX)
mask |= IO_PIN_FMUX(3);
if (ioregs_init[i].bit_or & IO_PIN_OVER_HOLD)
mask |= IO_PIN_HOLD(3);
if (ioregs_init[i].bit_or & IO_PIN_OVER_PULL)
mask |= IO_PIN_PUD(1) | IO_PIN_PUE(1);
if (ioregs_init[i].bit_or & IO_PIN_OVER_STRIG)
mask |= IO_PIN_ST(1);
if (ioregs_init[i].bit_or & IO_PIN_OVER_DRVSTR)
mask |= IO_PIN_DS(3);
/*
* DON'T do the "mask, then insert"
* in place on the register, it may
* break access to external hardware
* (like boot ROMs) when configuring
* LPB related pins, while the code to
* configure the pin is read from this
* very address region
*/
clrsetbits_be32(reg + j, mask,
ioregs_init[i].val & mask);
}
}
}
}
|
