blob: 26ff1a24ac103458307014ddea30ac41b9b87e3c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
|
/*
* Copyright (C) 2014 Stefan Roese <sr@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/soc.h>
DECLARE_GLOBAL_DATA_PTR;
u32 spl_boot_device(void)
{
#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT)
return BOOT_DEVICE_SPI;
#endif
#if defined(CONFIG_SPL_MMC_SUPPORT)
return BOOT_DEVICE_MMC1;
#endif
}
#ifdef CONFIG_SPL_MMC_SUPPORT
u32 spl_boot_mode(void)
{
return MMCSD_MODE_RAW;
}
#endif
void board_init_f(ulong dummy)
{
/* Set global data pointer */
gd = &gdata;
#ifndef CONFIG_MVEBU_BOOTROM_UARTBOOT
/*
* Only call arch_cpu_init() when not returning to the
* Marvell BootROM, which is done when booting via
* the xmodem protocol (kwboot tool). Otherwise the
* internal register will get remapped and the BootROM
* can't continue to run correctly.
*/
/* Linux expects the internal registers to be at 0xf1000000 */
arch_cpu_init();
#endif
/*
* Pin muxing needs to be done before UART output, since
* on A38x the UART pins need some re-muxing for output
* to work.
*/
board_early_init_f();
preloader_console_init();
timer_init();
/* First init the serdes PHY's */
serdes_phy_config();
/* Setup DDR */
ddr3_init();
#ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT
/*
* Return to the BootROM to continue the Marvell xmodem
* UART boot protocol. As initiated by the kwboot tool.
*
* This can only be done by the BootROM and not by the
* U-Boot SPL infrastructure, since the beginning of the
* image is already read and interpreted by the BootROM.
* SPL has no chance to receive this information. So we
* need to return to the BootROM to enable this xmodem
* UART download.
*/
return_to_bootrom();
#endif
board_init_r(NULL, 0);
}
|