blob: 46325ec344b2189a61ce266fef29ed73aa67372e (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
|
/*
* Copyright (C) 2014 Gateworks Corporation
* Copyright (C) 2011-2012 Freescale Semiconductor, Inc.
*
* Author: Tim Harvey <tharvey@gateworks.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/spl.h>
#include <spl.h>
#include <asm/imx-common/hab.h>
#if defined(CONFIG_MX6)
/* determine boot device from SRC_SBMR1 (BOOT_CFG[4:1]) or SRC_GPR9 register */
u32 spl_boot_device(void)
{
struct src *psrc = (struct src *)SRC_BASE_ADDR;
unsigned int gpr10_boot = readl(&psrc->gpr10) & (1 << 28);
unsigned reg = gpr10_boot ? readl(&psrc->gpr9) : readl(&psrc->sbmr1);
unsigned int bmode = readl(&psrc->sbmr2);
/*
* Check for BMODE if serial downloader is enabled
* BOOT_MODE - see IMX6DQRM Table 8-1
*/
if (((bmode >> 24) & 0x03) == 0x01) /* Serial Downloader */
return BOOT_DEVICE_UART;
/* BOOT_CFG1[7:4] - see IMX6DQRM Table 8-8 */
switch ((reg & 0x000000FF) >> 4) {
/* EIM: See 8.5.1, Table 8-9 */
case 0x0:
/* BOOT_CFG1[3]: NOR/OneNAND Selection */
if ((reg & 0x00000008) >> 3)
return BOOT_DEVICE_ONENAND;
else
return BOOT_DEVICE_NOR;
break;
/* Reserved: Used to force Serial Downloader */
case 0x1:
return BOOT_DEVICE_UART;
/* SATA: See 8.5.4, Table 8-20 */
case 0x2:
return BOOT_DEVICE_SATA;
/* Serial ROM: See 8.5.5.1, Table 8-22 */
case 0x3:
/* BOOT_CFG4[2:0] */
switch ((reg & 0x07000000) >> 24) {
case 0x0 ... 0x4:
return BOOT_DEVICE_SPI;
case 0x5 ... 0x7:
return BOOT_DEVICE_I2C;
}
break;
/* SD/eSD: 8.5.3, Table 8-15 */
case 0x4:
case 0x5:
return BOOT_DEVICE_MMC1;
/* MMC/eMMC: 8.5.3 */
case 0x6:
case 0x7:
return BOOT_DEVICE_MMC1;
/* NAND Flash: 8.5.2 */
case 0x8 ... 0xf:
return BOOT_DEVICE_NAND;
}
return BOOT_DEVICE_NONE;
}
#endif
#if defined(CONFIG_SPL_MMC_SUPPORT)
/* called from spl_mmc to see type of boot mode for storage (RAW or FAT) */
u32 spl_boot_mode(const u32 boot_device)
{
switch (spl_boot_device()) {
/* for MMC return either RAW or FAT mode */
case BOOT_DEVICE_MMC1:
case BOOT_DEVICE_MMC2:
#if defined(CONFIG_SPL_FAT_SUPPORT)
return MMCSD_MODE_FS;
#elif defined(CONFIG_SUPPORT_EMMC_BOOT)
return MMCSD_MODE_EMMCBOOT;
#else
return MMCSD_MODE_RAW;
#endif
break;
default:
puts("spl: ERROR: unsupported device\n");
hang();
}
}
#endif
#if defined(CONFIG_SECURE_BOOT)
__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
{
typedef void __noreturn (*image_entry_noargs_t)(void);
image_entry_noargs_t image_entry =
(image_entry_noargs_t)(unsigned long)spl_image->entry_point;
debug("image entry point: 0x%lX\n", spl_image->entry_point);
/* HAB looks for the CSF at the end of the authenticated data therefore,
* we need to subtract the size of the CSF from the actual filesize */
if (authenticate_image(spl_image->load_addr,
spl_image->size - CONFIG_CSF_SIZE)) {
image_entry();
} else {
puts("spl: ERROR: image authentication unsuccessful\n");
hang();
}
}
#endif
|
