1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
|
/*
* SAMSUNG/GOOGLE Peach-Pit board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "exynos54xx.dtsi"
#include <dt-bindings/clock/maxim,max77802.h>
#include <dt-bindings/regulator/maxim,max77802.h>
/ {
model = "Samsung/Google Peach Pit board based on Exynos5420";
compatible = "google,pit-rev#", "google,pit",
"google,peach", "samsung,exynos5420", "samsung,exynos5";
config {
google,bad-wake-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>;
hwid = "PIT TEST A-A 7848";
lazy-init = <1>;
};
aliases {
serial0 = "/serial@12C30000";
console = "/serial@12C30000";
pmic = "/i2c@12CA0000";
i2c104 = &i2c_tunnel;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
default-brightness-level = <7>;
power-supply = <&tps65090_fet1>;
};
dmc {
mem-manuf = "samsung";
mem-type = "ddr3";
clock-frequency = <800000000>;
arm-frequency = <900000000>;
};
tmu@10060000 {
samsung,min-temp = <25>;
samsung,max-temp = <125>;
samsung,start-warning = <95>;
samsung,start-tripping = <105>;
samsung,hw-tripping = <110>;
samsung,efuse-min-value = <40>;
samsung,efuse-value = <55>;
samsung,efuse-max-value = <100>;
samsung,slope = <274761730>;
samsung,dc-value = <25>;
};
/* MAX77802 is on i2c bus 4 */
i2c@12CA0000 {
clock-frequency = <400000>;
power-regulator@9 {
compatible = "maxim,max77802-pmic";
reg = <0x9>;
};
};
i2c@12CD0000 { /* i2c7 */
clock-frequency = <100000>;
soundcodec@20 {
reg = <0x20>;
compatible = "maxim,max98090-codec";
};
edp-lvds-bridge@48 {
compatible = "parade,ps8625";
reg = <0x48>;
sleep-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
reset-gpios = <&gpy7 7 GPIO_ACTIVE_LOW>;
parade,regs = /bits/ 8 <
0x02 0xa1 0x01 /* HPD low */
/*
* SW setting
* [1:0] SW output 1.2V voltage is lower to 96%
*/
0x04 0x14 0x01
/*
* RCO SS setting
* [5:4] = b01 0.5%, b10 1%, b11 1.5%
*/
0x04 0xe3 0x20
0x04 0xe2 0x80 /* [7] RCO SS enable */
/*
* RPHY Setting
* [3:2] CDR tune wait cycle before
* measure for fine tune b00: 1us,
* 01: 0.5us, 10:2us, 11:4us.
*/
0x04 0x8a 0x0c
0x04 0x89 0x08 /* [3] RFD always on */
/*
* CTN lock in/out:
* 20000ppm/80000ppm. Lock out 2
* times.
*/
0x04 0x71 0x2d
/*
* 2.7G CDR settings
* NOF=40LSB for HBR CDR setting
*/
0x04 0x7d 0x07
0x04 0x7b 0x00 /* [1:0] Fmin=+4bands */
0x04 0x7a 0xfd /* [7:5] DCO_FTRNG=+-40% */
/*
* 1.62G CDR settings
* [5:2]NOF=64LSB [1:0]DCO scale is 2/5
*/
0x04 0xc0 0x12
0x04 0xc1 0x92 /* Gitune=-37% */
0x04 0xc2 0x1c /* Fbstep=100% */
0x04 0x32 0x80 /* [7]LOS signal disable */
/*
* RPIO Setting
* [7:4] LVDS driver bias current :
* 75% (250mV swing)
*/
0x04 0x00 0xb0
/*
* [7:6] Right-bar GPIO output strength is 8mA
*/
0x04 0x15 0x40
/* EQ Training State Machine Setting */
0x04 0x54 0x10 /* RCO calibration start */
/* [4:0] MAX_LANE_COUNT set to one lane */
0x01 0x02 0x81
/* [4:0] LANE_COUNT_SET set to one lane */
0x01 0x21 0x81
0x00 0x52 0x20
0x00 0xf1 0x03 /* HPD CP toggle enable */
0x00 0x62 0x41
/* Counter number add 1ms counter delay */
0x00 0xf6 0x01
/*
* [6]PWM function control by
* DPCD0040f[7], default is PWM
* block always works.
*/
0x00 0x77 0x06
/*
* 04h Adjust VTotal tolerance to
* fix the 30Hz no display issue
*/
0x00 0x4c 0x04
/* DPCD00400='h00, Parade OUI = 'h001cf8 */
0x01 0xc0 0x00
0x01 0xc1 0x1c /* DPCD00401='h1c */
0x01 0xc2 0xf8 /* DPCD00402='hf8 */
/*
* DPCD403~408 = ASCII code
* D2SLV5='h4432534c5635
*/
0x01 0xc3 0x44
0x01 0xc4 0x32 /* DPCD404 */
0x01 0xc5 0x53 /* DPCD405 */
0x01 0xc6 0x4c /* DPCD406 */
0x01 0xc7 0x56 /* DPCD407 */
0x01 0xc8 0x35 /* DPCD408 */
/*
* DPCD40A, Initial Code major revision
* '01'
*/
0x01 0xca 0x01
/* DPCD40B Initial Code minor revision '05' */
0x01 0xcb 0x05
/* DPCD720 Select internal PWM */
0x01 0xa5 0xa0
/*
* FFh for 100% PWM of brightness, 0h for 0%
* brightness
*/
0x01 0xa7 0xff
/*
* Set LVDS output as 6bit-VESA mapping,
* single LVDS channel
*/
0x01 0xcc 0x13
/* Enable SSC set by register */
0x02 0xb1 0x20
/*
* Set SSC enabled and +/-1% central
* spreading
*/
0x04 0x10 0x16
/* MPU Clock source: LC => RCO */
0x04 0x59 0x60
0x04 0x54 0x14 /* LC -> RCO */
0x02 0xa1 0x91>; /* HPD high */
ports {
port@0 {
bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
port@1 {
bridge_in: endpoint {
remote-endpoint = <&dp_out>;
};
};
};
};
};
sound@3830000 {
samsung,codec-type = "max98090";
};
i2c@12E10000 { /* i2c9 */
clock-frequency = <400000>;
tpm@20 {
compatible = "infineon,slb9645tt";
reg = <0x20>;
};
};
panel: panel {
compatible = "auo,b116xw03";
power-supply = <&tps65090_fet6>;
backlight = <&backlight>;
port {
panel_in: endpoint {
remote-endpoint = <&bridge_out>;
};
};
};
spi@12d30000 { /* spi1 */
spi-max-frequency = <50000000>;
firmware_storage_spi: flash@0 {
compatible = "spi-flash";
reg = <0>;
/*
* A region for the kernel to store a panic event
* which the firmware will add to the log.
*/
elog-panic-event-offset = <0x01e00000 0x100000>;
elog-shrink-size = <0x400>;
elog-full-threshold = <0xc00>;
};
};
xhci@12000000 {
samsung,vbus-gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
};
xhci@12400000 {
samsung,vbus-gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
};
fimd@14400000 {
samsung,vl-freq = <60>;
samsung,vl-col = <1366>;
samsung,vl-row = <768>;
samsung,vl-width = <1366>;
samsung,vl-height = <768>;
samsung,vl-clkp;
samsung,vl-dp;
samsung,vl-bpix = <4>;
samsung,vl-hspw = <32>;
samsung,vl-hbpd = <40>;
samsung,vl-hfpd = <40>;
samsung,vl-vspw = <6>;
samsung,vl-vbpd = <10>;
samsung,vl-vfpd = <12>;
samsung,vl-cmd-allow-len = <0xf>;
samsung,winid = <3>;
samsung,interface-mode = <1>;
samsung,dp-enabled = <1>;
samsung,dual-lcd-enabled = <0>;
};
};
&dp {
status = "okay";
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x06>;
samsung,lane-count = <2>;
samsung,hpd-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
ports {
port@0 {
dp_out: endpoint {
remote-endpoint = <&bridge_in>;
};
};
};
};
&spi_2 {
spi-max-frequency = <3125000>;
spi-deactivate-delay = <200>;
status = "okay";
num-cs = <1>;
samsung,spi-src-clk = <0>;
cs-gpios = <&gpb1 2 0>;
cros_ec: cros-ec@0 {
compatible = "google,cros-ec-spi";
interrupt-parent = <&gpx1>;
interrupts = <5 0>;
reg = <0>;
spi-half-duplex;
spi-max-timeout-ms = <1100>;
ec-interrupt = <&gpx1 5 GPIO_ACTIVE_LOW>;
#address-cells = <1>;
#size-cells = <1>;
/*
* This describes the flash memory within the EC. Note
* that the STM32L flash erases to 0, not 0xff.
*/
flash@8000000 {
reg = <0x08000000 0x20000>;
erase-value = <0>;
};
controller-data {
samsung,spi-feedback-delay = <1>;
};
i2c_tunnel: i2c-tunnel {
compatible = "google,cros-ec-i2c-tunnel";
#address-cells = <1>;
#size-cells = <0>;
google,remote-bus = <0>;
battery: sbs-battery@b {
compatible = "sbs,sbs-battery";
reg = <0xb>;
sbs,poll-retry-count = <1>;
sbs,i2c-retry-count = <2>;
};
power-regulator@48 {
compatible = "ti,tps65090";
reg = <0x48>;
regulators {
tps65090_dcdc1: dcdc1 {
ti,enable-ext-control;
};
tps65090_dcdc2: dcdc2 {
ti,enable-ext-control;
};
tps65090_dcdc3: dcdc3 {
ti,enable-ext-control;
};
tps65090_fet1: fet1 {
regulator-name = "vcd_led";
};
tps65090_fet2: fet2 {
regulator-name = "video_mid";
regulator-always-on;
};
tps65090_fet3: fet3 {
regulator-name = "wwan_r";
regulator-always-on;
};
tps65090_fet4: fet4 {
regulator-name = "sdcard";
regulator-always-on;
};
tps65090_fet5: fet5 {
regulator-name = "camout";
regulator-always-on;
};
tps65090_fet6: fet6 {
regulator-name = "lcd_vdd";
};
tps65090_fet7: fet7 {
regulator-name = "video_mid_1a";
regulator-always-on;
};
tps65090_ldo1: ldo1 {
};
tps65090_ldo2: ldo2 {
};
};
charger {
compatible = "ti,tps65090-charger";
};
};
};
};
};
#include "cros-ec-keyboard.dtsi"
|
