1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
|
/*
* Copyright (C) 2011-2014 Panasonic Corporation
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/sc-regs.h>
#include <asm/arch/sg-regs.h>
void dpll_init(void)
{
u32 tmp;
/*
* Set DPLL SSC parameters for DPLLCTRL3
* [23] DIVN_TEST 0x1
* [22:16] DIVN 0x50
* [10] FREFSEL_TEST 0x1
* [9:8] FREFSEL 0x2
* [4] ICPD_TEST 0x1
* [3:0] ICPD 0xb
*/
tmp = readl(SC_DPLLCTRL3);
tmp &= ~0x00ff0717;
tmp |= 0x00d0061b;
writel(tmp, SC_DPLLCTRL3);
/*
* Set DPLL SSC parameters for DPLLCTRL
* <-1%> <-2%>
* [29:20] SSC_UPCNT 132 (0x084) 132 (0x084)
* [14:0] SSC_dK 6335(0x18bf) 12710(0x31a6)
*/
tmp = readl(SC_DPLLCTRL);
tmp &= ~0x3ff07fff;
#ifdef CONFIG_DPLL_SSC_RATE_1PER
tmp |= 0x084018bf;
#else
tmp |= 0x084031a6;
#endif
writel(tmp, SC_DPLLCTRL);
/*
* Set DPLL SSC parameters for DPLLCTRL2
* [31:29] SSC_STEP 0
* [27] SSC_REG_REF 1
* [26:20] SSC_M 79 (0x4f)
* [19:0] SSC_K 964689 (0xeb851)
*/
tmp = readl(SC_DPLLCTRL2);
tmp &= ~0xefffffff;
tmp |= 0x0cfeb851;
writel(tmp, SC_DPLLCTRL2);
}
void upll_init(void)
{
u32 tmp, clk_mode_upll, clk_mode_axosel;
tmp = readl(SG_PINMON0);
clk_mode_upll = tmp & SG_PINMON0_CLK_MODE_UPLLSRC_MASK;
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
/* set 0 to SNRT(UPLLCTRL.bit28) and K_LD(UPLLCTRL.bit[27]) */
tmp = readl(SC_UPLLCTRL);
tmp &= ~0x18000000;
writel(tmp, SC_UPLLCTRL);
if (clk_mode_upll == SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT) {
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
/* AXO: 25MHz */
tmp &= ~0x07ffffff;
tmp |= 0x0228f5c0;
} else {
/* AXO: default 24.576MHz */
tmp &= ~0x07ffffff;
tmp |= 0x02328000;
}
}
writel(tmp, SC_UPLLCTRL);
/* set 1 to K_LD(UPLLCTRL.bit[27]) */
tmp |= 0x08000000;
writel(tmp, SC_UPLLCTRL);
/* wait 10 usec */
udelay(10);
/* set 1 to SNRT(UPLLCTRL.bit[28]) */
tmp |= 0x10000000;
writel(tmp, SC_UPLLCTRL);
}
void vpll_init(void)
{
u32 tmp, clk_mode_axosel;
tmp = readl(SG_PINMON0);
clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;
/* set 1 to VPLA27WP and VPLA27WP */
tmp = readl(SC_VPLL27ACTRL);
tmp |= 0x00000001;
writel(tmp, SC_VPLL27ACTRL);
tmp = readl(SC_VPLL27BCTRL);
tmp |= 0x00000001;
writel(tmp, SC_VPLL27BCTRL);
/* Set 0 to VPLA_K_LD and VPLB_K_LD */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27BCTRL3);
/* Set 0 to VPLA_SNRST and VPLB_SNRST */
tmp = readl(SC_VPLL27ACTRL2);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27ACTRL2);
tmp = readl(SC_VPLL27BCTRL2);
tmp &= ~0x10000000;
writel(tmp, SC_VPLL27BCTRL2);
/* Set 0x20 to VPLA_SNRST and VPLB_SNRST */
tmp = readl(SC_VPLL27ACTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
writel(tmp, SC_VPLL27ACTRL2);
tmp = readl(SC_VPLL27BCTRL2);
tmp &= ~0x0000007f;
tmp |= 0x00000020;
writel(tmp, SC_VPLL27BCTRL2);
if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U ||
clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A) {
/* AXO: 25MHz */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066664;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x00066664;
writel(tmp, SC_VPLL27BCTRL3);
} else {
/* AXO: default 24.576MHz */
tmp = readl(SC_VPLL27ACTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp &= ~0x000fffff;
tmp |= 0x000f5800;
writel(tmp, SC_VPLL27BCTRL3);
}
/* Set 1 to VPLA_K_LD and VPLB_K_LD */
tmp = readl(SC_VPLL27ACTRL3);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27ACTRL3);
tmp = readl(SC_VPLL27BCTRL3);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27BCTRL3);
/* wait 10 usec */
udelay(10);
/* Set 0 to VPLA_SNRST and VPLB_SNRST */
tmp = readl(SC_VPLL27ACTRL2);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27ACTRL2);
tmp = readl(SC_VPLL27BCTRL2);
tmp |= 0x10000000;
writel(tmp, SC_VPLL27BCTRL2);
/* set 0 to VPLA27WP and VPLA27WP */
tmp = readl(SC_VPLL27ACTRL);
tmp &= ~0x00000001;
writel(tmp, SC_VPLL27ACTRL);
tmp = readl(SC_VPLL27BCTRL);
tmp |= ~0x00000001;
writel(tmp, SC_VPLL27BCTRL);
}
void pll_init(void)
{
dpll_init();
upll_init();
vpll_init();
/*
* Wait 500 usec until dpll get stable
* We wait 10 usec in upll_init() and vpll_init()
* so 20 usec can be saved here.
*/
udelay(480);
}
|
