summaryrefslogtreecommitdiff
path: root/arch/arm/cpu/armv7/uniphier/ph1-pro4/pll_init.c
blob: 2dcc0892cc7b7a0557da6cdb2cd05d9cb54f6500 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
/*
 * Copyright (C) 2011-2014 Panasonic Corporation
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <asm/io.h>
#include <asm/arch/sc-regs.h>
#include <asm/arch/sg-regs.h>

#undef DPLL_SSC_RATE_1PER

void dpll_init(void)
{
	u32 tmp;

	/*
	 * Set Frequency
	 * Set 0xc(1600MHz)/0xd(1333MHz)/0xe(1066MHz)
	 * to FOUT ( DPLLCTRL.bit[29:20] )
	 */
	tmp = readl(SC_DPLLCTRL);
	tmp &= ~(0x000f0000);
#if CONFIG_DDR_FREQ == 1600
	tmp |= 0x000c0000;
#elif CONFIG_DDR_FREQ == 1333
	tmp |= 0x000d0000;
#else
# error "Unsupported frequency"
#endif

	/*
	 * Set Moduration rate
	 * Set 0x0(1%)/0x1(2%) to SSC_RATE(DPLLCTRL.bit[15])
	 */
#if defined(DPLL_SSC_RATE_1PER)
	tmp &= ~0x00008000;
#else
	tmp |= 0x00008000;
#endif
	writel(tmp, SC_DPLLCTRL);

	tmp = readl(SC_DPLLCTRL2);
	tmp |= SC_DPLLCTRL2_NRSTDS;
	writel(tmp, SC_DPLLCTRL2);
}

void stop_mpll(void)
{
	u32 tmp;

	tmp = readl(SC_MPLLOSCCTL);

	if (!(tmp & SC_MPLLOSCCTL_MPLLST))
		return; /* already stopped */

	tmp &= ~SC_MPLLOSCCTL_MPLLEN;
	writel(tmp, SC_MPLLOSCCTL);

	while (readl(SC_MPLLOSCCTL) & SC_MPLLOSCCTL_MPLLST)
		;
}

void vpll_init(void)
{
	u32 tmp, clk_mode_axosel;

	/* Set VPLL27A &  VPLL27B */
	tmp = readl(SG_PINMON0);
	clk_mode_axosel = tmp & SG_PINMON0_CLK_MODE_AXOSEL_MASK;

#if defined(CONFIG_MACH_PH1_PRO4)
	/* 25MHz or 6.25MHz is default for Pro4R, no need to set VPLLA/B */
	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ)
		return;
#endif

	/* Disable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
	tmp = readl(SC_VPLL27ACTRL);
	tmp |= 0x00000001;
	writel(tmp, SC_VPLL27ACTRL);
	tmp = readl(SC_VPLL27BCTRL);
	tmp |= 0x00000001;
	writel(tmp, SC_VPLL27BCTRL);

	/* Unset VPLA_K_LD and VPLB_K_LD bit */
	tmp = readl(SC_VPLL27ACTRL3);
	tmp &= ~0x10000000;
	writel(tmp, SC_VPLL27ACTRL3);
	tmp = readl(SC_VPLL27BCTRL3);
	tmp &= ~0x10000000;
	writel(tmp, SC_VPLL27BCTRL3);

	/* Set VPLA_M and VPLB_M to 0x20 */
	tmp = readl(SC_VPLL27ACTRL2);
	tmp &= ~0x0000007f;
	tmp |= 0x00000020;
	writel(tmp, SC_VPLL27ACTRL2);
	tmp = readl(SC_VPLL27BCTRL2);
	tmp &= ~0x0000007f;
	tmp |= 0x00000020;
	writel(tmp, SC_VPLL27BCTRL2);

	if (clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ ||
	    clk_mode_axosel == SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ) {
		/* Set VPLA_K and VPLB_K for AXO: 25MHz */
		tmp = readl(SC_VPLL27ACTRL3);
		tmp &= ~0x000fffff;
		tmp |= 0x00066666;
		writel(tmp, SC_VPLL27ACTRL3);
		tmp = readl(SC_VPLL27BCTRL3);
		tmp &= ~0x000fffff;
		tmp |= 0x00066666;
		writel(tmp, SC_VPLL27BCTRL3);
	} else {
		/* Set VPLA_K and VPLB_K for AXO: 24.576 MHz */
		tmp = readl(SC_VPLL27ACTRL3);
		tmp &= ~0x000fffff;
		tmp |= 0x000f5800;
		writel(tmp, SC_VPLL27ACTRL3);
		tmp = readl(SC_VPLL27BCTRL3);
		tmp &= ~0x000fffff;
		tmp |= 0x000f5800;
		writel(tmp, SC_VPLL27BCTRL3);
	}

	/* wait 1 usec */
	udelay(1);

	/* Set VPLA_K_LD and VPLB_K_LD to load K parameters */
	tmp = readl(SC_VPLL27ACTRL3);
	tmp |= 0x10000000;
	writel(tmp, SC_VPLL27ACTRL3);
	tmp = readl(SC_VPLL27BCTRL3);
	tmp |= 0x10000000;
	writel(tmp, SC_VPLL27BCTRL3);

	/* Unset VPLA_SNRST and VPLB_SNRST bit */
	tmp = readl(SC_VPLL27ACTRL2);
	tmp |= 0x10000000;
	writel(tmp, SC_VPLL27ACTRL2);
	tmp = readl(SC_VPLL27BCTRL2);
	tmp |= 0x10000000;
	writel(tmp, SC_VPLL27BCTRL2);

	/* Enable write protect of VPLL27ACTRL[2-7]*, VPLL27BCTRL[2-8] */
	tmp = readl(SC_VPLL27ACTRL);
	tmp &= ~0x00000001;
	writel(tmp, SC_VPLL27ACTRL);
	tmp = readl(SC_VPLL27BCTRL);
	tmp &= ~0x00000001;
	writel(tmp, SC_VPLL27BCTRL);
}

void pll_init(void)
{
	dpll_init();
	stop_mpll();
	vpll_init();

	/*
	 * Wait 500 usec until dpll get stable
	 * We wait 1 usec in vpll_init() so 1 usec can be saved here.
	 */
	udelay(499);
}