1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
|
/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/boot_mode.h>
u32 get_cpu_rev(void)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
int reg = readl(&anatop->digprog);
/* Read mx6 variant: quad, dual or solo */
int system_rev = (reg >> 4) & 0xFF000;
/* Read mx6 silicon revision */
system_rev |= (reg & 0xFF) + 0x10;
return system_rev;
}
void init_aips(void)
{
struct aipstz_regs *aips1, *aips2;
aips1 = (struct aipstz_regs *)AIPS1_BASE_ADDR;
aips2 = (struct aipstz_regs *)AIPS2_BASE_ADDR;
/*
* Set all MPROTx to be non-bufferable, trusted for R/W,
* not forced to user-mode.
*/
writel(0x77777777, &aips1->mprot0);
writel(0x77777777, &aips1->mprot1);
writel(0x77777777, &aips2->mprot0);
writel(0x77777777, &aips2->mprot1);
/*
* Set all OPACRx to be non-bufferable, not require
* supervisor privilege level for access,allow for
* write access and untrusted master access.
*/
writel(0x00000000, &aips1->opacr0);
writel(0x00000000, &aips1->opacr1);
writel(0x00000000, &aips1->opacr2);
writel(0x00000000, &aips1->opacr3);
writel(0x00000000, &aips1->opacr4);
writel(0x00000000, &aips2->opacr0);
writel(0x00000000, &aips2->opacr1);
writel(0x00000000, &aips2->opacr2);
writel(0x00000000, &aips2->opacr3);
writel(0x00000000, &aips2->opacr4);
}
/*
* Set the VDDSOC
*
* Mask out the REG_CORE[22:18] bits (REG2_TRIG) and set
* them to the specified millivolt level.
* Possible values are from 0.725V to 1.450V in steps of
* 0.025V (25mV).
*/
void set_vddsoc(u32 mv)
{
struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR;
u32 val, reg = readl(&anatop->reg_core);
if (mv < 725)
val = 0x00; /* Power gated off */
else if (mv > 1450)
val = 0x1F; /* Power FET switched full on. No regulation */
else
val = (mv - 700) / 25;
/*
* Mask out the REG_CORE[22:18] bits (REG2_TRIG)
* and set them to the calculated value (0.7V + val * 0.25V)
*/
reg = (reg & ~(0x1F << 18)) | (val << 18);
writel(reg, &anatop->reg_core);
}
int arch_cpu_init(void)
{
init_aips();
set_vddsoc(1200); /* Set VDDSOC to 1.2V */
return 0;
}
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif
#if defined(CONFIG_FEC_MXC)
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
struct fuse_bank *bank = &iim->bank[4];
struct fuse_bank4_regs *fuse =
(struct fuse_bank4_regs *)bank->fuse_regs;
u32 value = readl(&fuse->mac_addr_high);
mac[0] = (value >> 8);
mac[1] = value ;
value = readl(&fuse->mac_addr_low);
mac[2] = value >> 24 ;
mac[3] = value >> 16 ;
mac[4] = value >> 8 ;
mac[5] = value ;
}
#endif
void boot_mode_apply(unsigned cfg_val)
{
unsigned reg;
struct src_regs *psrc = (struct src_regs *)SRC_BASE_ADDR;
writel(cfg_val, &psrc->gpr9);
reg = readl(&psrc->gpr10);
if (cfg_val)
reg |= 1 << 28;
else
reg &= ~(1 << 28);
writel(reg, &psrc->gpr10);
}
/*
* cfg_val will be used for
* Boot_cfg4[7:0]:Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
* After reset, if GPR10[28] is 1, ROM will copy GPR9[25:0]
* to SBMR1, which will determine the boot device.
*/
const struct boot_mode soc_boot_modes[] = {
{"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
/* reserved value should start rom usb */
{"usb", MAKE_CFGVAL(0x01, 0x00, 0x00, 0x00)},
{"sata", MAKE_CFGVAL(0x20, 0x00, 0x00, 0x00)},
{"escpi1:0", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x08)},
{"escpi1:1", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x18)},
{"escpi1:2", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x28)},
{"escpi1:3", MAKE_CFGVAL(0x30, 0x00, 0x00, 0x38)},
/* 4 bit bus width */
{"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x00)},
{"esdhc2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
{"esdhc3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
{"esdhc4", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
{NULL, 0},
};
|
