summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* configs: remove remnants of CONFIG_SYS_NAND_QUIET_TESTIgor Grinberg2015-09-28-12/+0
| | | | | | | | | | | | | | | | | | | The config option has been removed by one of the syncs with the Linux mainline MTD subsystem: ff94bc40af (mtd, ubi, ubifs: resync with Linux-3.14) It has been left inside the config files. Currently does not look to serve any purpose, so remove it now from all the configs. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Cc: Stefan Roese <sr@denx.de> Cc: "Albert ARIBAUD (3ADEV)" <albert.aribaud@3adev.fr> Cc: Peter Barada <peter.barada@logicpd.com> Cc: Steve Sakoman <sakoman@gmail.com> Cc: Peter Tyser <ptyser@xes-inc.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Simon Glass <sjg@chromium.org> Acked-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-09-24-3/+20
|\
| * imx: mx7dsabresd: drop code for CONFIG_CMD_BMODEPeng Fan2015-09-24-2/+0
| | | | | | | | | | | | | | | | | | We use outer pmic reset and drop internal reset signal, bmode will not work as expected, so drop boot mode code for 7dsabresd board. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Adrian Alonso <aalonso@freescale.com>
| * cgtqmx6eval: Add USB Mass Storage supportOtavio Salvador2015-09-20-0/+14
| | | | | | | | | | | | | | | | | | | | => ums 0 mmc 0 (Mounts the micro SD) => ums 0 mmc 1 (Mounts the eMMC) => ums 0 mmc 2 (Mounts the big SD) Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * mx7dsabresd: Remove unused config optionFabio Estevam2015-09-20-1/+0
| | | | | | | | | | | | CONFIG_FEC_DMA_MINALIGN is not used anywhere, so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6sabre_common: Add Fastboot supportFabio Estevam2015-09-20-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested basic fastboot commands, such as: On the mx6qsabresd U-boot prompt: => fastboot 0 On the host PC: $ fastboot getvar bootloader-version -i 0x0525 bootloader-version: U-Boot 2015.10-rc2-23960-g2462cce-dirty finished. total time: 0.000s $ fastboot reboot -i 0x0525 --> board reboots fine. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | Merge git://git.denx.de/u-boot-socfpgaTom Rini2015-09-24-2/+22
|\ \
| * | arm: socfpga: Enable env support on MCVMarek Vasut2015-09-24-1/+5
| | | | | | | | | | | | | | | | | | Enable support for env in eMMC on MCV SoM. Signed-off-by: Marek Vasut <marex@denx.de>
| * | arm: socfpga: Enable saveenv for SD/MMCDinh Nguyen2015-09-24-1/+18
| | | | | | | | | | | | | | | | | | Enable the able to save the environment variables when SD/MMC is used. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| * | arm: socfpga: rename socfpga_cyclone5 and socfpga_arria5 config filesDinh Nguyen2015-09-23-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | Rename the socfpga_cyclone5.h to socfpga_cyclone5_socdk.h, and socfpga_arria.h to socfpga_arria5_socdk.h. This matches the other SoCFPGA board config files. Suggested-by: Marek Vasut <marex@denx.de> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
| * | arm: socfpga: Fix cache configurationStefan Roese2015-09-23-1/+0
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | By not defining CONFIG_SYS_ARM_CACHE_WRITEALLOC, the WRITEBACK cache policy is selected. This leads to much better performance on the SoCFPGA. A quick network test shows this: Without this patch: => tftp 100000 big-40mb Speed: 1000, full duplex Using dwmac.ff702000 device TFTP from server 192.168.1.54; our IP address is 192.168.1.252 Filename 'big-40mb'. Load address: 0x100000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ########################## 2.5 MiB/s With this patch: => tftp 100000 big-40mb Speed: 1000, full duplex Using dwmac.ff702000 device TFTP from server 192.168.1.54; our IP address is 192.168.1.252 Filename 'big-40mb'. Load address: 0x100000 Loading: ################################################################# ################################################################# ################################################################# ################################################################# ########################## 7.6 MiB/s A performance improvement of factor ~3. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: Chin Liang See <clsee@altera.com> Cc: Pavel Machek <pavel@denx.de> Cc: Marek Vasut <marex@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2015-09-24-95/+18
|\ \
| * | ARM: uniphier: allow to enable multiple SoCsMasahiro Yamada2015-09-25-49/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before this commit, the Kconfig menu in mach-uniphier only allowed us to choose one SoC to be compiled. Each SoC has its own defconfig file for the build-test coverage. Consequently, some defconfig files are duplicated with only the difference in CONFIG_DEFAULT_DEVICE_TREE and CONFIG_{SOC_NAME}=y. Now, most of board-specific parameters have been moved to device trees, so it makes sense to include init code of multiple SoCs into a single image as long as the SoCs have similar architecture. In fact, some SoCs of UniPhier family are very similar: - PH1-LD4 and PH1-sLD8 - PH1-LD6b and ProXstream2 (will be added in the upcoming commit) This commit will be helpful to merge some defconfig files for better maintainability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: uniphier: remove kernel parameter settings from environmentMasahiro Yamada2015-09-25-16/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, console=ttyS0 is hard-coded in CONFIG_EXTRA_ENV_SETTINGS and it replaces the bootargs in the chosen node of the device tree passed to the kernel. This is not preferable because I am going to add some boards whose console is not ttyS0. Drop bootargs settings from U-Boot's environment and use the one in device tree by default. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: uniphier: rename CONFIG_MACH_* to CONFIG_ARCH_UNIPHIER_*Masahiro Yamada2015-09-25-8/+9
| | | | | | | | | | | | | | | | | | | | | I want these prefixed with CONFIG_ARCH_UNIPHIER_ to clarify they belong to UniPhier SoC family. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: uniphier: move CONFIG_SUPPORT_CARD_* macros to local fileMasahiro Yamada2015-09-25-9/+2
| | | | | | | | | | | | | | | | | | | | | It is no longer necessary to define CONFIG_SUPPORT_CARD_* globally. Move them to a C file as local macros. Also, rename the C file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: uniphier: parse device tree to determine DRAM base and sizeMasahiro Yamada2015-09-25-10/+1
| | | | | | | | | | | | | | | | | | | | | Device tree specifies the available memory ranges in its "/memory" node. Use it to simplify the CONFIG defines. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | ARM: uniphier: change the external bus address mappingMasahiro Yamada2015-09-25-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In UniPhier SoCs before ProXstream2 and PH1-LD6b, two address spaces 0x00000000 - 0x0fffffff 0x40000000 - 0x4fffffff are both mapped to the external bus (also called system bus), so either was OK. In the newest two SoCs, the former (0x00000000 - 0x0fffffff) is assigned for the serial NOR interface. Going forward, use the latter for the external bus. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * | ARM: uniphier: drop DCC micro support card supportMasahiro Yamada2015-09-25-14/+5
| |/ | | | | | | | | | | | | | | | | | | Historically (for compatibility with very old platforms), two different types of micro support cards have been used with the UniPhier SoC development boards. It has been painful to maintain both. Having one of them is enough. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | drivers/net/vsc9953: Add GPL-2.0+ SPDX-License-IdentifierCodrin Ciubotariu2015-09-21-8/+3
| | | | | | | | | | | | Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Add commands for VLAN ingress filteringCodrin Ciubotariu2015-09-21-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The command: ethsw [port <port_no>] ingress filtering { [help] | show | enable | disable } - enable/disable VLAN ingress filtering on port can be used to enable/disable/show VLAN ingress filtering on a port. This command has also been added to the ethsw generic parser from common/cmd_ethsw.c Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Add command for shared/private VLAN learningCodrin Ciubotariu2015-09-21-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The command: ethsw vlan fdb { [help] | show | shared | private } - make VLAN learning shared or private" configures the FDB to share the FDB entries learned on multiple VLANs or to keep them separated. By default, the FBD uses private VLAN learning. This command has also been added to the ethsw generic parser from common/cmd_ethsw.c Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Add VLAN commands for VSC9953Codrin Ciubotariu2015-09-21-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new added commands can be used to configure VLANs for a port on both ingress and egress. The new commands are: ethsw [port <port_no>] pvid { [help] | show | <pvid> } - set/show PVID (ingress and egress VLAN tagging) for a port; ethsw [port <port_no>] vlan { [help] | show | add <vid> | del <vid> } - add a VLAN to a port (VLAN members); ethsw [port <port_no>] untagged { [help] | show | all | none | pvid } - set egress tagging mod for a port" ethsw [port <port_no>] egress tag { [help] | show | pvid | classified } - Configure VID source for egress tag. Tag's VID could be the frame's classified VID or the PVID of the port These commands have also been added to the ethsw generic parser from common/cmd_ethsw.c Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Add commands to manipulate the FDB for VSC9953Codrin Ciubotariu2015-09-21-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new command: ethsw [port <port_no>] [vlan <vid>] fdb { [help] | show | flush | { add | del } <mac> } Can be used to add and delete FDB entries. Also, the command can be used to show entries from the FDB tables. When used with [port <port_no>] and [vlan <vid>], only the matching the FDB entries can be seen or flushed. The command has also been added to the generic ethsw parser from cmd_ethsw.c. Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | common/env_flags.c: Add function to validate a MAC addressCodrin Ciubotariu2015-09-21-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | The code that checks if a string has the format of a MAC address has been moved to a separate function called eth_validate_ethaddr_str(). This has been done to allow other components (such as vsc9953 driver) to validate a MAC address. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Add commands to enable/disable HW learningCodrin Ciubotariu2015-09-21-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The command: ethsw [port <port_no>] learning { [help] | show | auto | disable } can be used to enable/disable HW learning on a port. This patch also adds this command to the generic ethsw parser from cmd_ethsw. Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Add command to show/clear port countersCodrin Ciubotariu2015-09-21-3/+117
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The new added command: ethsw [port <port_no>] statistics { [help] | [clear] } will print counters like the number of Rx/Tx frames, number of Rx/Tx bytes, number of Rx/Tx unicast frames, etc. This patch also adds this commnd in the genereric ethsw parser from cmd_ethsw.c Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Use the generic Ethernet Switch parserCodrin Ciubotariu2015-09-21-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch replaces the parser used by VSC9953 L2 Switch driver with the generic one. Also, the config macro that enables the VSC9953 commands has been replaced in all the platforms that use this driver with the config macro that corresponds to the generic parser. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | common/cmd_ethsw: Add generic commands for Ethernet SwitchesCodrin Ciubotariu2015-09-21-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch creates a flexible parser for Ethernet Switch configurations that should support complex commands. The parser searches for predefined keywords in the command and calls the proper function when a match is found. Also, the parser allows for optional keywords, such as "port", to apply the command on a port or on all ports. For now, the defined commands are: ethsw [port <port_no>] { enable | disable | show } Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Add default configuration for VSC9953 L2 SwitchCodrin Ciubotariu2015-09-21-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At startup, the default configuration should be: - enable HW learning on all ports (HW default); - all ports are VLAN aware; - all ports are members of VLAN 1; - all ports have Port-based VLAN 1; - on all ports, the switch is allowed to remove maximum one VLAN tag, - on egress, the switch should add a VLAN tag if the frame is classified to a different VLAN than the port's Port-based VLAN; Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | include/bitfield: Add new bitfield operationsCodrin Ciubotariu2015-09-21-0/+32
| | | | | | | | | | | | | | | | | | | | These new operations allow manipulation of bitfields within a word by using a mask instead of width and shift values to extract/replace the bitfields. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Fix missing reserved registerCodrin Ciubotariu2015-09-21-0/+1
| | | | | | | | | | | | | | | | | | | | The VSC9953 DS reserves a register between vlan_mask and anag_efil registers. Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Fix bug when enabling a portCodrin Ciubotariu2015-09-21-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | When a port is enabled at init time, the initializing function touches more bits than necessary to enable a port (also touches reserved bits and default bit values). This patch fixes this issue by changing the value of the define used to enable the port and assures that no other bits are changes by replacing out_le32() with setbits_le32(). Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Cleanup patchCodrin Ciubotariu2015-09-21-47/+74
| | | | | | | | | | | | | | | | | | | | | | | | This patch groups some macros defined for registers and replaces some magic numbers from vsc9953 with macros. Also, "port" and "port_nr" words are replaced with "port_no", puts each variable declaration on a line and removes unnecessary tabs. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | drivers/net/vsc9953: Remove 'CONFIG_' from macros' nameCodrin Ciubotariu2015-09-21-23/+23
|/ | | | | | Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com>
* Merge git://git.denx.de/u-boot-x86Tom Rini2015-09-17-0/+12
|\
| * x86: quark: Add PCIe/USB static register programming after memory initBin Meng2015-09-16-0/+1
| | | | | | | | | | | | | | | | | | This adds static register programming for PCIe and USB after memory init as required by Quark firmware writer guide. Although not doing this did not cause any malfunction, just do it for safety. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * dm: pci: Add an inline API to test if a device is on a PCI busBin Meng2015-09-16-0/+11
| | | | | | | | | | | | | | | | Introduce device_is_on_pci_bus() which can be utilized by driver to test if a device is on a PCI bus. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | p2571: Remove hard-coded counter frequencyThierry Reding2015-09-16-2/+0
| | | | | | | | | | | | | | | | | | | | | | The counter frequency is derived from clk_m on Tegra, but that clock can be configured by the primary bootloader to run at the same frequency as the oscillator (38.4 MHz on Tegra210) or a divided down frequency (most typically 19.2 MHz). Remove the hard-coded frequency and allow the timer setup code to query the correct value at runtime. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | p2371: Remove hard-coded counter frequencyThierry Reding2015-09-16-3/+0
| | | | | | | | | | | | | | | | | | | | | | The counter frequency is derived from clk_m on Tegra, but that clock can be configured by the primary bootloader to run at the same frequency as the oscillator (38.4 MHz on Tegra210) or a divided down frequency (most typically 19.2 MHz). Remove the hard-coded frequency and allow the timer setup code to query the correct value at runtime. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | e2220-1170: Remove hard-coded counter frequencyThierry Reding2015-09-16-3/+0
| | | | | | | | | | | | | | | | | | | | | | The counter frequency is derived from clk_m on Tegra, but that clock can be configured by the primary bootloader to run at the same frequency as the oscillator (38.4 MHz on Tegra210) or a divided down frequency (most typically 19.2 MHz). Remove the hard-coded frequency and allow the timer setup code to query the correct value at runtime. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: replace V_PROMPT define with kconfigStephen Warren2015-09-16-4/+0
| | | | | | | | | | | | | | | | | | Commit 181bd9dc61d2 "kconfig: add config option for shell prompt" replaced define V_PROMPT with Kconfig option SYS_PROMPT. This crossed with patches adding Tegra T210 boards. Migrate the boards to the new scheme. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: fix COUNTER_FREQUENCY for T210Stephen Warren2015-09-16-4/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While T210 boards all have 38.4MHz crystals, per the TRM, the only supported configuration is to divide the crystal frequency by 2 to generate clk_m, which is what feeds the ARM generic timers amongst other things. Fix the value of COUNTER_FREQUENCY to reflect this divide-by-2. When I queried the 19.2 value in Tom's original T210 patches, I wasn't aware of this extra divide-by-2, and didn't notice any effect from the incorrect value, since its only used if U-Boot is booted in EL3, whereas I'm booting it in EL2. Reported-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: Add p2371-2180 boardStephen Warren2015-09-16-0/+65
|/ | | | | | | | | | P2371-2180 is a P2180 CPU board married to a P2597 I/O board. The combination contains SoC, DRAM, eMMC, SD card slot, HDMI, USB micro-B port, Ethernet via USB3, USB3 host port, SATA, PCIe, and two GPIO expansion headers. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge git://git.denx.de/u-boot-fdtTom Rini2015-09-16-8/+103
|\
| * fdt: add new fdt address parsing functionsStephen Warren2015-09-15-8/+103
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | fdtdec_get_addr_size() hard-codes the number of cells used to represent an address or size in DT. This is incorrect in many cases depending on the DT binding for a particular node or property (e.g. it is incorrect for the "reg" property). In most cases, DT parsing code must use the properties #address-cells and #size-cells to parse addres properties. This change splits up the implementation of fdtdec_get_addr_size() so that the core logic can be used for both hard-coded and non-hard-coded cases. Various wrapper functions are implemented that support cases where hard-coded cell counts should or should not be used, and where the client does and doesn't know the parent node ID that contains the properties #address-cells and #size-cells. dev_get_addr() is updated to use the new functions. Core functionality in fdtdec_get_addr_size_fixed() is widely tested via fdtdec_get_addr_size(). I tested fdtdec_get_addr_size_auto_noparent() and dev_get_addr() by manually modifying the Tegra I2C driver to invoke them. Much of the core implementation of fdtdec_get_addr_size_fixed(), fdtdec_get_addr_size_auto_parent(), and fdtdec_get_addr_size_auto_noparent() comes from Thierry Reding's previous commit "fdt: Fix fdtdec_get_addr_size() for 64-bit". Based-on-work-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <treding@nvidia.com> Cc: Simon Glass <sjg@chromium.org> Cc: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Dropped #define DEBUG at the top of fdtdec.c: Signed-off-by: Simon Glass <sjg@chromium.org>
* | ti816x: Switch to SYS_GENERIC_BOARDTom Rini2015-09-15-0/+1
| | | | | | | | | | | | | | | | Tested on my TI186x rev E. (PG2.0) and take over maintainership. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | ti814x_evm: Switch to SYS_GENERIC_BOARDTom Rini2015-09-15-0/+1
| | | | | | | | | | | | | | | | | | | | Take over maintainership as well. Not tested as PG2.0 (which I have) needs additional work over PG1.0 (which Matt has). Cc: Matt Porter <mporter@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | omap3_evm_common.h: Switch to SYS_GENERIC_BOARDTom Rini2015-09-15-0/+1
|/ | | | | | | | Tested on my OMAP3 uEVM. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2015-09-13-0/+112
|\
generated by cgit v1.1 at 2024-11-05 08:27:13 +0000