summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
...
* ti814x_evm: Switch to SYS_GENERIC_BOARDTom Rini2015-09-15-0/+1
| | | | | | | | | | Take over maintainership as well. Not tested as PG2.0 (which I have) needs additional work over PG1.0 (which Matt has). Cc: Matt Porter <mporter@konsulko.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* omap3_evm_common.h: Switch to SYS_GENERIC_BOARDTom Rini2015-09-15-0/+1
| | | | | | | | Tested on my OMAP3 uEVM. Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* Merge branch 'rmobile' of git://git.denx.de/u-boot-shTom Rini2015-09-13-0/+112
|\
| * arm: rmobile: Add Stout board supportVladimir Barinov2015-08-31-0/+112
| | | | | | | | | | | | | | | | | | | | Stout is an entry level development board based on R-Car H2 SoC (R8A7790) This commit supports the following peripherals: - SCIFA, I2C, Ethernet, QSPI, SDHI0/2, CPLD Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | ARM: Kirkwood: fix IDE configuration on LaCie boardsSimon Guinot2015-09-13-2/+5
| | | | | | | | | | | | | | | | | | | | | | On the LaCie boards netspace_max_v2 and net2big_v2, two internal hard drives are available. Additionally on the d2net_v2 board, an extra hard drive can be plugged via eSATA. This patch updates CONFIG_SYS_IDE_MAXBUS and CONFIG_SYS_IDE_MAXDEVICE accordingly for this boards. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
* | arm: move edb93xx to generic board architectureSergey Kostanbaev2015-09-13-0/+2
| | | | | | | | Use CONFIG_SYS_GENERIC_BOARD in EDB93XX board family
* | ARM: Kirkwood: enable generic board support for LaCie boardsSimon Guinot2015-09-13-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables generic board support for the following Kirkwood-based LaCie boards: - Network Space v2 (Mini, Lite and Max). - Internet Space v2. - D2 Network v2. - 2Big Network v2. Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | mx6ul_14x14_evk: Use the default CONFIG_SYS_PBSIZEFabio Estevam2015-09-13-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Entering the maximum number of characters defined by CONFIG_SYS_CBSIZE into the console and hitting enter afterwards, causes a hang in the system because CONFIG_SYS_PBSIZE is not capable of storing the extra characters of the error message: "Unknown command '' - try 'help'". Use the default CONFIG_SYS_PBSIZE definition from config_fallbacks.h to solve this problem. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx6ul_14x14_evk: Remove CONFIG_FEC_DMA_MINALIGNFabio Estevam2015-09-13-1/+0
| | | | | | | | | | | | | | CONFIG_FEC_DMA_MINALIGN is not used anywhere, so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
* | mx6ul_14x14_evk: Do not undef config optionsFabio Estevam2015-09-13-9/+0
| | | | | | | | | | | | | | There is no need to undef the config options. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
* | mx6ul_14x14_evk: Remove unused config optionFabio Estevam2015-09-13-1/+0
| | | | | | | | | | | | | | CONFIG_ROM_UNIFIED_SECTIONS is not used anywhere, so let's remove it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
* | mx6ul_14x14_evk: Remove CONFIG_SYS_GENERIC_BOARDFabio Estevam2015-09-13-1/+0
| | | | | | | | | | | | | | | | CONFIG_SYS_GENERIC_BOARD is selected by mx6_common.h, so there is no need to define it locally. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Peng Fan <Peng.Fan@freescale.com>
* | cgtqmx6eval: Remove CONFIG_CMD_FUSE optionFabio Estevam2015-09-13-5/+0
| | | | | | | | | | | | | | CONFIG_CMD_FUSE and CONFIG_MXC_OCOTP are selected by mx6_common.h, so there is no need to define them locally. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx6sxsabresd: Remove CONFIG_SPL_FAT_SUPPORTFabio Estevam2015-09-13-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the SD card does not contain the u-boot.img then we get the following error: U-Boot SPL 2015.10-rc2-23947-g7ad5930 (Sep 08 2015 - 14:10:29) ** Partition 1 not valid on device 0 ** spl_register_fat_device: fat register err - -1 spl_load_image_fat: error reading image u-boot.img, err - -1 Remove CONFIG_SPL_FAT_SUPPORT and let CONFIG_SPL_MMC_SUPPORT do the job. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx6slevk: Remove CONFIG_SPL_FAT_SUPPORTFabio Estevam2015-09-13-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the SD card does not contain the u-boot.img then we get the following error: U-Boot SPL 2015.10-rc2-23947-g7ad5930 (Sep 08 2015 - 14:10:29) ** Partition 1 not valid on device 0 ** spl_register_fat_device: fat register err - -1 spl_load_image_fat: error reading image u-boot.img, err - -1 Remove CONFIG_SPL_FAT_SUPPORT and let CONFIG_SPL_MMC_SUPPORT do the job. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx6ul_14x14_evk: Remove CONFIG_SPL_FAT_SUPPORTFabio Estevam2015-09-13-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the SD card does not contain the u-boot.img then we get the following error: U-Boot SPL 2015.10-rc2-23947-g7ad5930 (Sep 08 2015 - 14:10:29) ** Partition 1 not valid on device 0 ** spl_register_fat_device: fat register err - -1 spl_load_image_fat: error reading image u-boot.img, err - -1 Remove CONFIG_SPL_FAT_SUPPORT and let CONFIG_SPL_MMC_SUPPORT do the job. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | imx: mx6ul: support mx6ul 9x9 evk boardPeng Fan2015-09-13-4/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is to support mx6ul_9x9_evk board based on mx6ul_14x14_evk, the difference between mx6ul 9x9 evk and mx6ul 14x14 evk are: 1. mx6ul 9x9 evk use pfuze3000, while mx6ul 14x14 evk use DCDC. 2. mx6ul 9x9 evk supports 256MB LPDDR2, while mx6ul 14x14 evk supports 512MB DDR3 3. mx6ul_9x9_evk use 9x9 package, while mx6ul_14x14_evk use 14x14 package. This patch add the following: 1. Discard PHYS_SDRAM_SIZE from header file, use imx_ddr_size() 2. Introduce a macro is_mx6ul_9x9_evk using CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) to avoid "#ifdef xxx" in non-SPL part. To SPL part, CONFIG_IS_ENABLED(TARGET_MX6UL_9X9_EVK) can not work, so still use "#ifdef CONFIG_TARGET_MX6UL_9X9_EVK" to differentiate with mx6ul_14x14_evk. And we have no way to dymaically checking this chip is 9x9 or 14x14. 3. mx6ul_9x9_evk use pfuze3000, so enabled POWER related configurations. POWER related configurations also effect for mx6ul_14x14_evk. But power_init_board implementation using 'if (is_mx6ul_9x9_evk())' to do initialization for mx6ul_9x9_evk, and do nothing for mx6ul_14x14_evk. 4. mx6ul_9x9_evk use lpddr2 with size 256MB, so add related SPL DRAM configurations. 5. Enable CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG and setting dtb file according to board_rev and board_name. 6. Add TARGET_MX6UL_9X9_EVK Kconfig entry Boot Log: U-Boot SPL 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53) reading u-boot.img reading u-boot.img U-Boot 2015.10-rc2-00356-g536ce34 (Sep 06 2015 - 12:22:53 +0800) CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C) at 41C Reset cause: POR Board: MX6UL 9x9 EVK I2C: ready DRAM: 256 MiB PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11 MMC: FSL_SDHC: 0, FSL_SDHC: 1 In: serial Out: serial Err: serial Net: FEC1 Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* | imx: discard duplicated MXC_OCOTP and CMD_FUSEPeng Fan2015-09-13-5/+0
| | | | | | | | | | | | | | | | | | | | We have CONFIG_MXC_OCOTP and CONFIG_CMD_FUSE in mx6_common.h, discard duplicated macro definitions in board header files. Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Otavio Salvador <otavio@ossystems.com.br>
* | imx: mx7dsabresd: Add support for MX7D SABRESD boardAdrian Alonso2015-09-13-0/+289
| | | | | | | | | | | | | | | | | | | | | | | | * Add i.MX7D SABRESD target board support with enabled modules: UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX. Build target: mx7dsabresd_config Signed-off-by: Peng Fan <Peng.Fan@freescale.com> Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* | thermal: imx_thermal: rework driver to be reusedAdrian Alonso2015-09-13-10/+10
| | | | | | | | | | | | | | | | Rework imx_thermal driver to be used across i.MX processor that support thermal sensor Signed-off-by: Adrian Alonso <aalonso@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* | omap3: cm-t3517: define CONFIG_MACH_TYPEDmitry Lifshitz2015-09-11-0/+2
| | | | | | | | | | | | | | Define CONFIG_MACH_TYPE to allow non DT Linux boot. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | omap3: cm-t3517: change environment sizeDmitry Lifshitz2015-09-11-1/+1
| | | | | | | | | | | | | | | | | | | | Mainline CM-T3517 U-Boot environment size differs from that one shipped with CM-T3517 boards. Update environment size, to avoid backward compatibility issues. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | omap3: cm-t3517: enable 'netretry' and setup timeoutDmitry Lifshitz2015-09-11-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | SBC-T3517 evaluation board has two Eth interfaces. Enable network retry of another interface if the default if failed or disconnected. Add 'netretry=yes' in the default env. Setup relevant timeout values in the board config file. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | igep00x0: Switch to use the generic distro configuration and environment.Enric Balletbò i Serra2015-09-11-67/+28
| | | | | | | | | | | | | | | | | | | | This patch changes a little bit the environment, current environment was broken for a long time, and board don't as expected sometimes, on production systems this is fixed adding boot script. I think it's time to change this to make a system conformant environment and use generic distro configurations and environment instead. We can use a boot script for the old way boot mode. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* | board: Add Toby-Churchill SL50 board support.Enric Balletbò i Serra2015-09-11-0/+138
| | | | | | | | | | | | | | | | | | Add support for Lightwriter SL50 series board, a small, robust and portable Voice Output Communication Aids (VOCA) designed to meet the particular and changing needs of people with speech loss resulting from a wide range of acquired, progressive and congenital conditions. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
* | ARM: tegra: enable DFU for RAMStephen Warren2015-09-11-0/+1
| | | | | | | | | | | | | | | | | | This allows transferring data directly to/from RAM. For example, one could create a boot script that starts DFU on a RAM region, then once DFU exits (which is under the control of the attached USB host, via a USB bus reset), uses the code/data that was received over DFU. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | ARM: tegra: enable filesystem writingStephen Warren2015-09-11-0/+2
| | | | | | | | | | | | | | | | Writing to files is a useful feature in general, so enable it everywhere. The primary purpose is to make DFU useful on filesystems in addition to raw devices. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | ARM: tegra: tweak DFU buffer sizesStephen Warren2015-09-11-3/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_DFU_DATA_BUF_SIZE defines the size of chunks transferred across USB. This doesn't need to be particularly large, since it doesn't limit the overall transfer size. CONFIG_SYS_DFU_MAX_FILE_SIZE is used to buffer an entire file before writing it to a filesystem. This define limits the maximum file size that may be transferred. Bump this up to 32MiB in order to support large uncompressed kernel images. Both of these buffers are dynamically allocated, and so the size of both needs to be taken into account when calculating the required malloc region size. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | ARM: tegra: fix malloc region sizingStephen Warren2015-09-11-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 52a7c98a1772 "tegra-common: increase malloc pool len by dfu mmc file buffer size" updated the definition of CONFIG_SYS_MALLOC_LEN for Tegra to take account of the DFU buffer size. However, this change had no effect, since typical Tegra board config headers don't set the DFU- related defines until after tegra-common.h is included. Fix this by moving the affected conditional code to tegra-common-post.h, which is included last. Also move the definition of SYS_NONCACHED_MEMORY since it's a related and adjacent definition. Fix the condition to test for the DFU feature, rather than specifically MMC DFU support, so it applies in all cases. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | include: configs: Enable DWC3 and DFU in OMAP5 uEVMKishon Vijay Abraham I2015-09-11-0/+62
| | | | | | | | | | | | | | | | Enable dwc3, dwc3-omap and PHY to get DWC3 functional in OMAP5 uEVM. Also enable support for DFU. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: spear: Enable THUMB mode on x600 boardStefan Roese2015-09-11-0/+1
| | | | | | | | | | | | | | | | | | To reduce the size of the U-Boot image on the x600 board, lets enable the THUMB mode. This reduces the overall size to less than 0x6000 bytes. Fitting it again in the onboard NOR flash. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org>
* | arm: spear: Add BCH4 SW support to SPEAr600 x600 boardStefan Roese2015-09-11-0/+2
| | | | | | | | | | | | | | | | | | This board is equipped with a Micron NAND chip (MT29F1G08ABADAH4) that needs 4-bit ECC. But the SPEAr600 only supports 1-bit HW ECC internally. This patch enables the SW 4-bit BCH support for this board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.kumar@linaro.org>
* | arm: Remove tx25 boardSimon Glass2015-09-11-172/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove palmtreo680 boardSimon Glass2015-09-11-270/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove xaeniax boardSimon Glass2015-09-11-539/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove vpac270_nor_128 boardSimon Glass2015-09-11-325/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove vl_ma2sc boardSimon Glass2015-09-11-429/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove vision2 boardSimon Glass2015-09-11-199/+0
| | | | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stefano Babic <sbabic@denx.de>
* | arm: Remove versatileab boardSimon Glass2015-09-11-214/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove tt01 boardSimon Glass2015-09-11-266/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove tk71 boardSimon Glass2015-09-11-112/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove scb9328 boardSimon Glass2015-09-11-312/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove rd6281a boardSimon Glass2015-09-11-96/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove qong boardSimon Glass2015-09-11-283/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove pxa255_idp, zipitz2 boardsSimon Glass2015-09-11-573/+0
| | | | | | | | | | | | | | These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove portuxg20, stamp9g20 boardsSimon Glass2015-09-11-244/+0
| | | | | | | | | | | | | | These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove polaris and trizepsiv boardsSimon Glass2015-09-11-309/+0
| | | | | | | | | | | | | | | | These boards have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stefano Babic <sbabic@denx.de>
* | arm: Remove palmtc boardSimon Glass2015-09-11-219/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove palmld boardSimon Glass2015-09-11-245/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
* | arm: Remove otc570 boardSimon Glass2015-09-11-252/+0
| | | | | | | | | | | | | | This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-11-05 05:35:57 +0000