arm: Remove scb9328 board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

1 files changed, 0 insertions, 312 deletions

diff --git a/include/configs/scb9328.h b/include/configs/scb9328.h
deleted file mode 100644
index d4ffb46..0000000
--- a/include/configs/scb9328.h
+++ /dev/null
@@ -1,312 +0,0 @@
-/*
- * Copyright (C) 2003 ETC s.r.o.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- * Written by Peter Figuli <peposh@etc.sk>, 2003.
- *
- * 2003/13/06 Initial MP10 Support copied from wepep250
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_IMX		1     /* This is a Motorola MC9328MXL Chip */
-#define CONFIG_SCB9328		1     /* on a scb9328tronix board */
-
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL1
-/*
- * Select serial console configuration
- */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-
-/*
- * Boot options. Setting delay to -1 stops autostart count down.
- * NOTE: Sending parameters to kernel depends on kernel version and
- * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
- * parameters at all! Do not get confused by them so.
- */
-#define CONFIG_BOOTDELAY   -1
-#define CONFIG_BOOTARGS	   "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328"
-#define CONFIG_BOOTCOMMAND "bootm 10040000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		10.10.10.9
-#define CONFIG_SERVERIP		10.10.10.10
-
-/*
- * General options for u-boot. Modify to save memory foot print
- */
-#define CONFIG_SYS_LONGHELP				      /* undef saves memory  */
-#define CONFIG_SYS_CBSIZE		256		      /* console I/O buffer  */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size   */
-#define CONFIG_SYS_MAXARGS		16		      /* max command args    */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	      /* boot args buf size  */
-
-#define CONFIG_SYS_MEMTEST_START	0x08100000	      /* memtest test area   */
-#define CONFIG_SYS_MEMTEST_END		0x08F00000
-
-#define CONFIG_SYS_CPUSPEED		0x141	     /* core clock - register value  */
-
-#define CONFIG_BAUDRATE 115200
-/*
- * Definitions related to passing arguments to kernel.
- */
-#define CONFIG_CMDLINE_TAG	     1	 /* send commandline to Kernel	     */
-#define CONFIG_SETUP_MEMORY_TAGS     1	 /* send memory definition to kernel */
-#define CONFIG_INITRD_TAG	     1	 /* send initrd params		     */
-
-/*
- * Malloc pool need to host env + 128 Kb reserve for other allocations.
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128<<10) )
-
-/* SDRAM Setup Values
-0x910a8300 Precharge Command CAS 3
-0x910a8200 Precharge Command CAS 2
-
-0xa10a8300 AutoRefresh Command CAS 3
-0xa10a8200 Set AutoRefresh Command CAS 2 */
-
-#define PRECHARGE_CMD 0x910a8200
-#define AUTOREFRESH_CMD 0xa10a8200
-
-/*
- * SDRAM Memory Map
- */
-/* SH FIXME */
-#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of SDRAM */
-#define SCB9328_SDRAM_1		0x08000000	/* SDRAM bank #1	   */
-#define SCB9328_SDRAM_1_SIZE	0x01000000	/* 16 MB		   */
-
-#define CONFIG_SYS_TEXT_BASE	0x10000000
-
-#define CONFIG_SYS_SDRAM_BASE	SCB9328_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR	(SCB9328_SDRAM_1 + 0xf00000)
-
-/*
- * Configuration for FLASH memory for the Synertronixx board
- */
-
-/* #define SCB9328_FLASH_32M */
-
-/* 32MB */
-#ifdef SCB9328_FLASH_32M
-#define CONFIG_SYS_MAX_FLASH_BANKS		1	/* FLASH banks count (not chip count)*/
-#define CONFIG_SYS_MAX_FLASH_SECT		256	/* number of sector in FLASH bank    */
-#define SCB9328_FLASH_BUS_WIDTH		2	/* we use 16 bit FLASH memory...     */
-#define SCB9328_FLASH_INTERLEAVE	1	/* ... made of 1 chip		     */
-#define SCB9328_FLASH_BANK_SIZE	 0x02000000	/* size of one flash bank	     */
-#define SCB9328_FLASH_SECT_SIZE	 0x00020000	/* size of erase sector		     */
-#define SCB9328_FLASH_BASE	 0x10000000	/* location of flash memory	     */
-#define SCB9328_FLASH_UNLOCK		1	/* perform hw unlock first	     */
-#else
-
-/* 16MB */
-#define CONFIG_SYS_MAX_FLASH_BANKS		1	/* FLASH banks count (not chip count)*/
-#define CONFIG_SYS_MAX_FLASH_SECT		128	/* number of sector in FLASH bank    */
-#define SCB9328_FLASH_BUS_WIDTH		2	/* we use 16 bit FLASH memory...     */
-#define SCB9328_FLASH_INTERLEAVE	1	/* ... made of 1 chip		     */
-#define SCB9328_FLASH_BANK_SIZE	 0x01000000	/* size of one flash bank	     */
-#define SCB9328_FLASH_SECT_SIZE	 0x00020000	/* size of erase sector		     */
-#define SCB9328_FLASH_BASE	 0x10000000	/* location of flash memory	     */
-#define SCB9328_FLASH_UNLOCK		1	/* perform hw unlock first	     */
-#endif /* SCB9328_FLASH_32M */
-
-/* This should be defined if CFI FLASH device is present. Actually benefit
-   is not so clear to me. In other words we can provide more informations
-   to user, but this expects more complex flash handling we do not provide
-   now.*/
-#undef	CONFIG_SYS_FLASH_CFI
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000    /* timeout for Erase operation */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	240000    /* timeout for Write operation */
-
-#define CONFIG_SYS_FLASH_BASE		SCB9328_FLASH_BASE
-
-/*
- * This is setting for JFFS2 support in u-boot.
- * Right now there is no gain for user, but later on booting kernel might be
- * possible. Consider using XIP kernel running from flash to save RAM
- * footprint.
- * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
- */
-#define CONFIG_SYS_JFFS2_FIRST_BANK		0
-#define CONFIG_SYS_JFFS2_FIRST_SECTOR		5
-#define CONFIG_SYS_JFFS2_NUM_BANKS		1
-
-/*
- * Environment setup. Definitions of monitor location and size with
- * definition of environment setup ends up in 2 possibilities.
- * 1. Embeded environment - in u-boot code is space for environment
- * 2. Environment is read from predefined sector of flash
- * Right now we support 2. possiblity, but expecting no env placed
- * on mentioned address right now. This also needs to provide whole
- * sector for it - for us 256Kb is really waste of memory. U-boot uses
- * default env. and until kernel parameters could be sent to kernel
- * env. has no sense to us.
- */
-
-/* Setup for PA23 which is Reset Default PA23 but has to become
-   CS5 */
-
-#define CONFIG_SYS_GPR_A_VAL		0x00800000
-#define CONFIG_SYS_GIUS_A_VAL		0x0043fffe
-
-#define CONFIG_SYS_MONITOR_BASE	0x10000000
-#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128b ( 1 flash sector )  */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		0x10020000	/* absolute address for now  */
-#define CONFIG_ENV_SIZE		0x20000
-
-#define	 CONFIG_ENV_OVERWRITE  1		/* env is not writable now   */
-
-/*
- * CSxU_VAL:
- * 63| x	x x x | x x x x | x x  x    x | x x x x | x x x x | x x x x | x x x x | x x x x|32
- *   |DTACK_SEL|0|BCD |	  BCS	| PSZ|PME|SYNC|	 DOL	| CNC|	  WSC	    | 0| WWS  |	  EDC  |
- *
- * CSxL_VAL:
- * 31| x x x x | x x x x | x x x x | x x x x | x x x x |  x x x x | x x	 x x | x x  x	 x| 0
- *   |	 OEA   |   OEN	 |   WEA   |   WEN   |	 CSA   |EBC| DSZ  | 0|SP|0|WP| 0 0|PA|CSEN|
- */
-
-#define CONFIG_SYS_CS0U_VAL 0x000F2000
-#define CONFIG_SYS_CS0L_VAL 0x11110d01
-#define CONFIG_SYS_CS1U_VAL 0x000F0a00
-#define CONFIG_SYS_CS1L_VAL 0x11110601
-#define CONFIG_SYS_CS2U_VAL 0x0
-#define CONFIG_SYS_CS2L_VAL 0x0
-
-#define CONFIG_SYS_CS3U_VAL 0x000FFFFF
-#define CONFIG_SYS_CS3L_VAL 0x00000303
-
-#define CONFIG_SYS_CS4U_VAL 0x000F0a00
-#define CONFIG_SYS_CS4L_VAL 0x11110301
-
-/* CNC == 3 too long
-   #define CONFIG_SYS_CS5U_VAL 0x0000C210 */
-
-/* #define CONFIG_SYS_CS5U_VAL 0x00008400
-   mal laenger mahcen, ob der bei 150MHz laenger haelt dann und
-   kaum langsamer ist */
-/* #define CONFIG_SYS_CS5U_VAL 0x00009400
-   #define CONFIG_SYS_CS5L_VAL 0x11010D03 */
-
-#define CONFIG_SYS_CS5U_VAL 0x00008400
-#define CONFIG_SYS_CS5L_VAL 0x00000D03
-
-#define CONFIG_DRIVER_DM9000		1
-#define CONFIG_DM9000_BASE		0x16000000
-#define DM9000_IO			CONFIG_DM9000_BASE
-#define DM9000_DATA			(CONFIG_DM9000_BASE+4)
-
-/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
-   f_ref=16,777MHz
-
-   0x002a141f: 191,9944MHz
-   0x040b2007: 144MHz
-   0x042a141f: 96MHz
-   0x0811140d: 64MHz
-   0x040e200e: 150MHz
-   0x00321431: 200MHz
-
-   0x08001800: 64MHz mit 16er Quarz
-   0x04001800: 96MHz mit 16er Quarz
-   0x04002400: 144MHz mit 16er Quarz
-
-   31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
-      |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------|	    */
-
-#define CPU200
-
-#ifdef CPU200
-#define CONFIG_SYS_MPCTL0_VAL 0x00321431
-#else
-#define CONFIG_SYS_MPCTL0_VAL 0x040e200e
-#endif
-
-/* #define BUS64 */
-#define BUS72
-
-#ifdef BUS72
-#define CONFIG_SYS_SPCTL0_VAL 0x04002400
-#endif
-
-#ifdef BUS96
-#define CONFIG_SYS_SPCTL0_VAL 0x04001800
-#endif
-
-#ifdef BUS64
-#define CONFIG_SYS_SPCTL0_VAL 0x08001800
-#endif
-
-/* Das ist der BCLK Divider, der aus der System PLL
-   BCLK und HCLK erzeugt:
-   31 | xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx | 0
-   0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2
-   0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2
-   0x2f001003 : 192MHz/5=38,4MHz
-   0x2f000003 : 64MHz/1
-   Bit 22: SPLL Restart
-   Bit 21: MPLL Restart */
-
-#ifdef BUS64
-#define CONFIG_SYS_CSCR_VAL 0x2f030003
-#endif
-
-#ifdef BUS72
-#define CONFIG_SYS_CSCR_VAL 0x2f030403
-#endif
-
-/*
- * Well this has to be defined, but on the other hand it is used differently
- * one may expect. For instance loadb command do not cares :-)
- * So advice is - do not relay on this...
- */
-#define CONFIG_SYS_LOAD_ADDR 0x08400000
-
-#define MHZ16QUARZINUSE
-
-#ifdef MHZ16QUARZINUSE
-#define CONFIG_SYSPLL_CLK_FREQ 16000000
-#else
-#define CONFIG_SYSPLL_CLK_FREQ 16780000
-#endif
-
-#define CONFIG_SYS_CLK_FREQ 16780000
-
-/* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */
-#define CONFIG_SYS_FMCR_VAL 0x00000001
-
-/* Bit[0:3] contain PERCLK1DIV for UART 1
-   0x000b00b ->b<- -> 192MHz/12=16MHz
-   0x000b00b ->8<- -> 144MHz/09=16MHz
-   0x000b00b ->3<- -> 64MHz/4=16MHz */
-
-#ifdef BUS96
-#define CONFIG_SYS_PCDR_VAL 0x000b00b5
-#endif
-
-#ifdef BUS64
-#define CONFIG_SYS_PCDR_VAL 0x000b00b3
-#endif
-
-#ifdef BUS72
-#define CONFIG_SYS_PCDR_VAL 0x000b00b8
-#endif
-
-#endif	/* __CONFIG_H */