summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* drivers/mtd/spi/eeprom_m95xxx.c: add missing error checkingAlbin Tonnerre2010-04-09-0/+6
| | | | Signed-off-by: Albin Tonnerre <albin.tonnerre@free-electrons.com>
* Merge branch 'master' of git://git.denx.de/u-boot-usbWolfgang Denk2010-04-09-18/+21
|\
| * EHCI: add NEC PCI IDSergei Shtylyov2010-04-08-0/+1
| | | | | | | | | | | | | | | | | | Add NEC EHCI controller to the list of the supported devices. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com> drivers/usb/host/ehci-pci.c | 1 + 1 file changed, 1 insertion(+)
| * EHCI: fix port reset reportingSergei Shtylyov2010-04-08-15/+17
| | | | | | | | | | | | | | | | | | Commit b416191a14770c6bcc6fd67be7decf8159b2baee (Fix EHCI port reset.) didn't move the code that checked for successful clearing of the port reset bit from ehci_submit_root(), relying on wait_ms() call instead. The mentioned code also erroneously reported port reset state when the reset was already completed. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
| * EHCI: fix off-by-one error in ehci_submit_root()Sergei Shtylyov2010-04-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | USB devices on the 2nd port are not detected and I get the following message: The request port(1) is not configured That's with default CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS value of 2. 'req->index' is 1-based, so the comparison in ehci_submit_root() can't be correct. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
| * EHCI: fix root hub device descriptorSergei Shtylyov2010-04-08-2/+2
| | | | | | | | | | | | | | | | On little endian machines, EHCI root hub's USB revision is reported as 0.2 -- cpu_to_le16() was missed in the initializer for the 'bcdUSB' descriptor field. The same should be done for the 'bcdDevice' field. Signed-off-by: Sergei Shtylyov <sshtylyov@mvista.com>
* | video: ati_radeon_fb.c: fix warning while compiling with DEBUGAnatolij Gustschin2010-04-08-1/+1
| | | | | | | | | | | | | | | | | | | | Fixes this warning: ati_radeon_fb.c: In function 'radeon_probe': ati_radeon_fb.c:598: warning: format '%x' expects type 'unsigned int', but argument 2 has type 'void *' Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | ati_radeon: Support PCI virtual not eq bus mapping.Ed Swarthout2010-04-08-28/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Use pci_bus_to_virt() to convert the bus address from the BARs to virtual address' to eliminate the direct mapping requirement. Rename variables to better match usage (_phys -> _bus or no-suffix) This fixes the mpc8572ds CONFIG_PHYS_64BIT mode failure: "videoboot: Video ROM failed to map!" Tested on mpc8572ds with and without CONFIG_PHYS_64BIT. Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
* | ati_radeon: return with error when emulator failsEd Swarthout2010-04-08-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Console was being switched to video even if emulator fails and causing this hang: Scanning PCI bus 04 04 00 1095 3132 0104 00 PCIE3 on bus 03 - 04 Video: ATI Radeon video card (1002, 5b60) found @(2:0:0) videoboot: Booting PCI video card bus 2, function 0, device 0 videoboot: Video ROM failed to map! 640x480x8 31kHz 59Hz radeonfb: FIFO Timeout ! Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Tested-by: Anatolij Gustschin <agust@denx.de>
* | video: cfb_console.c: add support for RLE8 bitmapsAnatolij Gustschin2010-04-08-2/+198
|/ | | | | | Allow displaying 8-bit RLE BMP images. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-cfi-flashWolfgang Denk2010-04-08-0/+2
|\
| * cfi_flash: reset timer in flash status checkThomas Chou2010-04-07-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds reset_timer() before the flash status check waiting loop. Since the timer is basically running asynchronous to the cfi code, it is possible to call get_timer(0), then only a few _SYSCLK_ cycles later an interrupt is generated. This causes timeout even though much less time has elapsed. So the timer period registers should be reset before get_timer(0) is called. There is similar usage in nand_base.c. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2010-04-08-20/+39
|\ \
| * | 85xx: Added various P1012/P1013/P1021/P1022 definesKumar Gala2010-04-07-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are various locations that we have chip specific info: * Makefile for which ddr code to build * Added P1012/P1013/P1021/P1022 to cpu_type_list and SVR list * Added number of LAWs for P1012/P1013/P1021/P1022 * Set CONFIG_MAX_CPUS to 2 for P1021/P1022 * PCI port config Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | ppc/8xxx: Delete PCI nodes from device tree if not configuredKumar Gala2010-04-07-6/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the PCI controller wasn't configured or enabled delete from the device tree (include its alias). For the case that we didn't even configure u-boot with knowledge of the controller we can use the fact that the pci_controller pointer is NULL to delete the node in the device tree. We determine that a controller was not setup (because of HW config) based on the fact that cfg_addr wasn't setup. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | fsl_esdhc: Only modify the field we are changing in WMLRoy Zang2010-04-07-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | When we set the read or write watermark in WML we should maintain the rest of the register as is, rather than using some hard coded value. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | fsl_esdhc: Add function to reset the eSDHC controllerJerry Huang2010-04-07-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To support multiple block read command we must set abort or use auto CMD12. If we booted from eSDHC controller neither of these are used and thus we need to reset the controller to allow multiple block read to function. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | fsl_esdhc: Always stop clock before changing frequencyKumar Gala2010-04-07-8/+3
| |/ | | | | | | | | | | | | | | We need to stop the clocks on 83xx/85xx as well as imx. No need to make this code conditional to just imx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk2010-04-08-0/+440
|\ \
| * | i2c: Move PPC4xx I2C driver into drivers/i2c directoryStefan Roese2010-04-06-0/+440
| |/ | | | | | | | | | | | | | | This patch moves the PPC4xx specific I2C device driver into the I2C drivers directory. All 4xx config headers are updated to include this driver. Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-04-08-25/+24
|\ \
| * | at91: use C structs for AT91 OHCI codeMatthias Fuchs2010-04-03-15/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is part of migrating the AT91 support towards using C struct for all SOC access. It removes one more CONFIG_AT91_LEGACY warning. at91_pmc.h needs cleanup after migration of the drivers has been done. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
| * | Convert at91 watchdog driver to new SoC accessAchim Ehrlich2010-04-03-10/+11
| |/ | | | | | | | | | | | | This converts the at91 watchdog driver to new c structure type to access registers of the SoC Signed-off-by: Achim Ehrlich <aehrlich@taskit.de>
* | nios2: Fix outx/writex parameter order in io.hScott McNutt2010-04-02-9/+9
| | | | | | | | | | | | | | | | | | The outx/writex macros were using writex(addr, val) rather than the standard writex(val, addr), resulting in incompatibilty with architecture independent components. This change set uses standard parameter order. Signed-off-by: Scott McNutt <smcnutt@psyent.com>
* | nios2: Move serial drivers to individual files in drivers/serialScott McNutt2010-04-02-0/+355
|/ | | | | | | | The standard Altera UART & JTAG UART as well as the OpenCores YANU driver are now in individual files in drivers/serial rather than a single file uner cpu/nios2. Signed-off-by: Scott McNutt <smcnutt@psyent.com>
* Merge branch 'next'Wolfgang Denk2010-04-01-112/+489
|\
| * Merge remote branch 'origin/master' into nextWolfgang Denk2010-03-29-1/+4
| |\
| * \ Merge branch 'next' of git://www.denx.de/git/u-boot-cfi-flash into nextWolfgang Denk2010-03-29-7/+86
| |\ \
| | * | cfi flash: add status polling method for amd flashThomas Chou2010-03-26-7/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds status polling method to offer an alternative to data toggle method for amd flash chips. This patch is needed for nios2 cfi flash interface, where the bus controller performs 4 bytes read cycles for a single byte read instruction. The data toggle method can not detect chip busy status correctly. So we have to poll DQ7, which will be inverted when the chip is busy. This feature is enabled with the config def, CONFIG_SYS_CFI_FLASH_STATUS_POLL Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | Merge branch 'next' of git://git.denx.de/u-boot-coldfire into nextWolfgang Denk2010-03-28-27/+31
| |\ \ \
| | * | | ColdFire: Update uart_port_conf in serial driverTsiChung Liew2010-03-24-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Provide proper port passing from serial_init to uart_part_conf. Signed-off-by: TsiChung Liew <tsicliew@gmail.com>
| | * | | add block write function to spartan3 slave serial loadWolfgang Wegner2010-03-24-25/+29
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using seperate function calls for each bit-bang of slave serial load can be painfully slow. This patch adds the possibility to supply a block write function that loads the complete block of data in one call (like it can already be done with Altera FPGAs). On an MCF5373L (240 MHz) loading an XC3S4000 this reduces the load time from around 15 seconds to around 3 seconds Signed-off-by: Wolfgang Wegner <w.wegner at astro-kom.de>
| * | | at91: add hwecc method for nandNikolay Petukhov2010-03-23-0/+301
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a patch to use the hardware ECC controller of the AT91SAM9260 for the AT91 nand. Taken from the kernel 2.6.33. Signed-off-by: Nikolay Petukhov <Nikolay.Petukhov@gmail.com>
| * | | TI: Davinci: NAND Driver CleanupCyril Chemparathy2010-03-23-59/+69
| |/ / | | | | | | | | | | | | | | | | | | Modified to use IO accessor routines consistently. Eliminated volatile usage to keep checkpatch.pl happy. Signed-off-by: Cyril Chemparathy <cyril@ti.com>
| * | Merge remote branch 'origin/master' into nextWolfgang Denk2010-03-21-19/+19
| |\ \
| * | | mpc5xxx: Remove all references to MGT5100Detlev Zundel2010-03-21-19/+2
| | | | | | | | | | | | | | | | | | | | | | | | We do not support a processor that never reached a real customer. Signed-off-by: Detlev Zundel <dzu@denx.de>
| * | | video: Fix console display when splashscreen is usedMatthias Weisser2010-03-21-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a splashscreen is used the console scrolling used the scroll size as needed when a logo was displayed. This patch sets the scroll size to the whole screen if a splashscreen is shown. Signed-off-by: Matthias Weisser <matthias.weisser@graf-syteco.de>
* | | | net, fec_mxc: only setup the device enetaddr with eeprom valueHeiko Schocher2010-03-31-1/+0
| |_|/ |/| | | | | | | | | | | | | | | | | | | | Only fill the device enetaddr with the contents of the eeprom, do not program it in MAC address registers Signed-off-by: Heiko Schocher <hs@denx.de> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* | | cfi_flash: precision and underflow problem in tout calculationRenato Andreola2010-03-25-1/+4
| |/ |/| | | | | | | | | | | | | | | With old configuration it could happen tout=0 if CONFIG_SYS_HZ<1000. Signed-off-by: Renato Andreola <renato.andreola@imagos.it> Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Stefan Roese <sr@denx.de>
* | mod change 755 => 644 for multiple filesThomas Weber2010-03-21-0/+0
| | | | | | | | | | | | | | | | I executed 'find . -name "*.[chS]" -perm 755 -exec chmod 644 {} \;' Signed-off-by: Thomas Weber <swirl@gmx.li> Add some more: neither Makefile nor config.mk need execute permissions. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | mxcmmc: fix warnings due to access 32 bit registers with 16 bit accessorsStefano Babic2010-03-21-18/+18
| | | | | | | | | | | | | | | | | | Some registers of the mxcmmc driver were accessed using 16 bit accessor functions, because only the LSB is significant. This is not needed and generates warnings. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | Fix PCI_BASE_ADDRESS_5 handling in pci_hose_config_device()Wolfgang Denk2010-03-21-1/+1
| | | | | | | | | | | | Signed-off-by: FUJITA Kazutoshi <fujita@soum.co.jp> Signed-off-by: <wd@denx.de> Acked-by: Stefan Roese <sr@denx.de>
* | video: Fix console display when splashscreen is usedMatthias Weisser2010-03-13-9/+12
|/ | | | | | | | | If a splashscreen is used the console scrolling used the scroll size as needed when a logo was displayed. This patch sets the scroll size to the whole screen if a splashscreen is shown. Signed-off-by: Matthias Weisser <matthias.weisser@graf-syteco.de>
* Prepare v2010.03-rc1v2010.03-rc1Wolfgang Denk2010-03-12-6/+1
| | | | | | Coding style cleanup, update CHANGELOG. Signed-off-by: Wolfgang Denk <wd@denx.de>
* mpc82xx: Remove SL8245 board and the now orpahned sk98lin network driver.Detlev Zundel2010-03-12-45428/+0
| | | | | | | | | This code has compile problems and the company does not even exist any more. So we take the liberty to drop support for it. Signed-off-by: Detlev Zundel <dzu@denx.de> CC: Wolfgang Denk <wd@denx.de> CC: Ben Warren <biggerbadderben@gmail.com>
* Fix memory leak in mmc_read()Wolfgang Denk2010-03-11-1/+1
| | | | | | | | | There is be a path through mmc_read in drivers/mmc/mmc.c where malloc'd memory is not freed before exiting mmc_read: it occurs if mmc_set_blocklen() returns a non-zero value. Reported-by: Quentin Armitage <Quentin@Armitage.org.uk> Signed-off-by: Wolfgang Denk <wd@denx.de>
* fec_mxc: add MX25 supportJohn Rigby2010-03-07-3/+60
| | | | | | | | Use RMII for MX25 Add code to init gasket that enables RMII Signed-off-by: John Rigby <jcrigby@gmail.com> CC: Ben Warren <biggerbadderben@gmail.com>
* fec_mxc: cleanup and factor out MX27 dependenciesJohn Rigby2010-03-07-6/+9
| | | | | | | | | | | | | general cleanup move clock init to cpu_eth_init in cpu/arm926ejs/mx27/generic.c make MX27 specific phy init conditional on CONFIG_MX27 replace call to imx_get_ahbclk with one to imx_get_fecclk and define imx_get_fecclk in include/asm-arm/arch-mx27/clock.h Signed-off-by: John Rigby <jcrigby@gmail.com> CC: Ben Warren <biggerbadderben@gmail.com> CC: Fred Fan <fanyefeng@gmail.com> CC: Tom <Tom.Rix@windriver.com>
* Add support for Freescale MX25 SOCJohn Rigby2010-03-07-5/+5
| | | | | | | | | ARM926EJS core with MX31 peripherals. Signed-off-by: John Rigby <jcrigby@gmail.com> Earlier Version Signed-off-by: Wolfgang Denk <wd@denx.de> CC: Fred Fan <fanyefeng@gmail.com> CC: Tom <Tom.Rix@windriver.com>
* fsl_esdhc: add support for mx51 processorStefano Babic2010-03-07-48/+101
| | | | | | | | | The esdhc controller in the mx51 processor is quite the same as the one in some powerpc processors (MPC83xx, MPC85xx). This patches adapts the driver to support the arm mx51. Signed-off-by: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-10-30 04:05:13 +0000