summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
...
* | mmc: sd: extracting erase related information from sd statusPeng Fan2016-09-20-0/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add function to read SD_STATUS information. According to the information, get erase_timeout/erase_size/erase_offset. Add a structure sd_ssr to include the erase related information. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Simon Glass <sjg@chromium.org> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: Stefan Wahren <stefan.wahren@i2se.com> Cc: Clemens Gruber <clemens.gruber@pqgruber.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Eric Nelson <eric@nelint.com> Cc: Stephen Warren <swarren@nvidia.com>
* | mmc: sdhci: drop CONFIG_ from CONFIG_SDHCI_CMD_MAX_TIMEOUTMasahiro Yamada2016-09-20-6/+3
| | | | | | | | | | | | | | | | | | No need for per-SoC adjustment for this parameter. It should be determined by the slowest hardware. Currently, no board overrides this CONFIG, so 3.2 sec is large enough. (If not, we can make it even larger.) Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | mmc: sdhci: drop CONFIG_ from CONFIG_SDHCI_CMD_DEFAULT_TIMEMasahiro Yamada2016-09-20-2/+2
| | | | | | | | | | | | | | | | This CONFIG is not configurable since it is not guarded by #ifndef. Nobody has complained about that, so there is no need to keep it as a CONFIG option. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | mmc: sdhci: move SDMA capability check to sdhci_setup_cfg()Masahiro Yamada2016-09-20-11/+8
| | | | | | | | | | | | | | | | If CONFIG_BLK is enabled, add_sdhci() is never called. Move this quirk handling to sdhci_setup_cfg(), which is now the central place for hardware capability checks. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | mmc: sdhci: move broken voltage quirk handling to sdhci_setup_cfg()Masahiro Yamada2016-09-20-3/+3
| | | | | | | | | | | | | | | | If CONFIG_BLK is enabled, add_sdhci() is never called. Move this quirk handling to sdhci_setup_cfg(), which is now the central place for hardware capability checks. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | mmc: sdhci: move error message to more relevant placeMasahiro Yamada2016-09-20-6/+9
| | | | | | | | | | | | | | | | "Hardware doesn't specify base clock frequency" may not be only the error case of sdhci_setup_cfg(). It is better to print this where the corresponding error is triggered. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | mmc: sdhci: move sdhci_reset() call to sdhci_init()Masahiro Yamada2016-09-20-2/+2
|/ | | | | | | | | | | If CONFIG_BLK is enabled, add_sdhci() is never called. So, sdhci_reset() is not called, either. This is a problem for my board as it needs the reset to start from a sane state. Move the add_sdhci() call to sdhci_init(), which is visited by both of the with/without CONFIG_BLK cases. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2016-09-18-137/+322
|\
| * pinctrl: uniphier: add UniPhier sLD3 pinctrl driverMasahiro Yamada2016-09-18-0/+135
| | | | | | | | | | | | Add pin-mux support for UniPhier sLD3 SoC. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * pinctrl: uniphier: support 4bit-width pin-mux register capabilityMasahiro Yamada2016-09-18-14/+11
| | | | | | | | | | | | | | On LD4 SoC or later, the pin-mux registers are 8bit wide, while 4bit wide on sLD3 SoC. Support it for the sLD3 pinctrl driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * pinctrl: uniphier: move register base macros from header to .c fileMasahiro Yamada2016-09-14-4/+4
| | | | | | | | | | | | | | These macros are only referenced in pinctrl-uniphier-core.c, so they need not reside in a header file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * pinctrl: uniphier: add System Bus pin-mux settingsMasahiro Yamada2016-09-14-0/+147
| | | | | | | | | | | | This is needed to get access to UniPhier System Bus (external bus). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * mmc: uniphier-sd: migrate to CONFIG_BLKMasahiro Yamada2016-09-14-26/+25
| | | | | | | | | | | | | | This is the state-of-the-art MMC driver implementation. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * usb: uniphier: remove UniPhier xHCI driver and select DM_USBMasahiro Yamada2016-09-14-93/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This driver has not been converted to Driver Model, and it is an obstacle to migrate other block device drivers. Remove it for now. The UniPhier SoCs already use a DM-based EHCI driver, so now ARCH_UNIPHIER can select DM_USB. These two changes must be done atomically because removing the legacy driver causes a build error. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Marek Vasut <marex@denx.de>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-sunxiTom Rini2016-09-18-25/+51
|\ \
| * | sunxi: musb: Re-init musb controller on repeated probe callsHans de Goede2016-09-18-9/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With sunxi-musb musb_lowlevel_init() can fail when a charger; or no cable is plugged into the otg port. To avoid leaking the struct musb allocated by musb_init_controller() on repeated musb_usb_probe() calls, we were caching its result. But musb_init_controller() does more, such as calling sunxi_musb_init() which enables the clocks. Not calling sunxi_musb_init() causes the musb controller to stop working after a "usb reset" since that calls musb_usb_remove() which disables the clocks. This commit fixes this by removing the caching of the struct returned from musb_init_controller(), it replaces this by free-ing the allocated memory in musb_usb_remove() and calling musb_usb_remove() on musb_usb_probe() errors to ensure proper cleanup. While at it also make musb_usb_probe() and musb_usb_remove() static. Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: musb: Power off OTG port VBUS when disabledChen-Yu Tsai2016-09-17-16/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux kernel musb driver expects VBUS to be off while initializing musb. Having it on results in a repeating string of warnings, followed by an unusable peripheral. The peripheral is only usable after physically removing the OTG adapter, letting musb reset its state. This partially reverts commit c9f8947e6604 ("sunxi: usb-phy: Never power off the usb ports") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | sunxi: axp2xx: disable ldoio0/1 at bootHans de Goede2016-09-17-0/+28
| |/ | | | | | | | | | | | | | | | | | | When cold-booting the ldoio0/1 regulators are always off / the gpios are always at tristate. But when re-booting from android these are sometimes on. Disable them at axp_init time (iow as early as possible) to remove this difference between a cold boot and a reboot. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | Use separate options for TPL supportSimon Glass2016-09-16-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present TPL uses the same options as SPL support. In a few cases the board config enables or disables the SPL options depending on whether CONFIG_TPL_BUILD is defined. With the move to Kconfig, options are determined for the whole build and (without a hack like an #undef in a header file) cannot be controlled in this way. Create new TPL options for these and update users. This will allow Kconfig conversion to proceed for these boards. Signed-off-by: Simon Glass <sjg@chromium.org>
* | i2c: at91_i2c: Fix the wrong include fileWenyou Yang2016-09-13-1/+1
| | | | | | | | | | | | | | Since the 'clk_client.h' doesn't exist, it should be 'clk.h'. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | rockchip: i2c: fix >32 byte writesJohn Keeping2016-09-13-2/+2
| | | | | | | | | | | | | | | | | | The special handling of the chip address and register address must only happen before we send the data buffer, otherwise we will end up inserting both of these every 32 bytes. Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: i2c: move register write out of inner loopJohn Keeping2016-09-13-2/+2
| | | | | | | | | | | | | | | | | | | | | | There is no point in writing intermediate values to the txdata registers. Also add padding to the debug logging to make it easier to read when there are leading zeroes. Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
* | rockchip: i2c: use named constant when appropriateJohn Keeping2016-09-13-1/+1
|/ | | | | | | Make it clear that we are using the same value in two adjacent lines. Signed-off-by: John Keeping <john@metanate.com> Acked-by: Simon Glass <sjg@chromium.org>
* net: asix: Fix AX88772B when used with DriverModelJoshua Scott2016-09-09-0/+5
| | | | | | | | | | | | | | | | | | | A previous patch (net: asix: fix operation without eeprom) added a two-byte shift to the packet buffer when receiving a packet on the AX88772B. This shift was not included when the driver was updated to work with DriverModel. Testing on a Marvell DB-88F6820-ACM showed that the adapter was not functioning correctly (EHCI timeouts). This patch brings the two-byte shift to the DriverModel implementation of ops->recv (asix_eth_recv). Testing on the same board, we were able to TFTP a file over and confirm that the crc32 was correct. Signed-off-by: Joshua Scott <joshua.scott@alliedtelesis.co.nz> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2016-09-09-0/+5
|\
| * mtd: nand: mxs: fix cache alignment for cache lines >32Stefan Agner2016-09-06-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Currently the command buffer gets allocated with a size of 32 bytes. This causes warning messages on systems with cache lines bigger than 32 bytes: CACHE: Misaligned operation at range [9df17a00, 9df17a20] Define command buffer to be at least 32 bytes, but more if cache line is bigger. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Reviewed-by: Stefano Babic <sbabic@denx.de>
* | regulator: fixed: obey startup delayJohn Keeping2016-09-06-0/+10
| | | | | | | | | | | | | | | | | | | | When enabling a fixed regulator, it may take some time to rise to the correct voltage. If we do not delay here then subsequent operations will fail. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | meson: odroid-c2: enable Ethernet support through the device treeBeniamino Galvani2016-09-06-0/+1
| | | | | | | | | | | | | | | | Remove the device definition from board file, update the driver with the new compatible property and update config with necessary options. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | pinctrl: add driver for meson-gxbb pin controllerBeniamino Galvani2016-09-06-0/+704
| | | | | | | | | | | | | | Add a pin controller driver for Meson GXBB adapted from Linux kernel. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | pinctrl: generic: scan for "pins" and "groups" properties in sub-nodesBeniamino Galvani2016-09-06-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In cases where the pins and groups definitions are in a sub-node, as: uart_a { mux { groups = "uart_tx_a", "uart_rx_a"; function = "uart_a"; }; }; pinctrl_generic_set_state_subnode() returns an error for the top-level node and pinctrl_generic_set_state() fails. Instead, return success so that the child nodes are tried. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | serial: bcm283x_mu: Detect disabled serial deviceAlexander Graf2016-09-06-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the raspberry pi, you can disable the serial port to gain dynamic frequency scaling which can get handy at times. However, in such a configuration the serial controller gets its rx queue filled up with zero bytes which then happily get transmitted on to whoever calls getc() today. This patch adds detection logic for that case by checking whether the RX pin is mapped to GPIO15 and disables the mini uart if it is not mapped properly. That way we can leave the driver enabled in the tree and can determine during runtime whether serial is usable or not, having a single binary that allows for uart and non-uart operation. Signed-off-by: Alexander Graf <agraf@suse.de> Acked-by: Stephen Warren <swarren@wwwdotorg.org> Reviewed-by: Simon Glass <sjg@chromium.org>
* | bcm2835_gpio: Implement GPIOF_FUNCAlexander Graf2016-09-06-13/+17
| | | | | | | | | | | | | | | | | | | | | | | | So far we could only tell the gpio framework that a GPIO was mapped as input or output, not as alternative function. This patch adds support for determining whether a function is mapped as alternative. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* | nand: Fix some more NULL name testsScott Wood2016-09-01-3/+3
| | | | | | | | | | | | | | | | | | | | | | Now that nand_info[] is an array of pointers we need to test the pointer itself rather than using name as a proxy for NULLness. Fixes: b616d9b0a708eb9 ("nand: Embed mtd_info in struct nand_chip") Signed-off-by: Scott Wood <oss@buserror.net> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Tony Lindgren <tony@atomide.com> Acked-by: Tony Lindgren <tony@atomide.com>
* | mtd: nand: pxa3xx: use nand_set_controller_dataChris Packham2016-09-01-0/+1
|/ | | | | | | | | In commit 17cb4b8f327e ("mtd: nand: Add+use mtd_to/from_nand and nand_get/set_controller_data") the assignment of mtd->priv was removed but was not replaced. This adds the required nand_set_controller_data() call. Signed-off-by: Chris Packham <judge.packham@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2016-08-28-70/+80
|\
| * ARM: uniphier: change UNIPHIER_SERIAL to default y optionMasahiro Yamada2016-08-28-0/+1
| | | | | | | | | | | | | | This is very likely to be necessary for normal use cases. Set its default to 'y' for shorter defconfig files. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * mmc: uniphier-sd: just return if already set to desired clock rateMasahiro Yamada2016-08-28-2/+5
| | | | | | | | | | | | With this, we can save unnecessary udelay(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * mmc: uniphier-sd: return error code if unsupported width is givenMasahiro Yamada2016-08-28-5/+9
| | | | | | | | | | | | | | | | With the CONFIG_DM_MMC_OPS migration, the .set_ios callback can return an integer now. Return an appropriate error value rather than sudden death by BUG(). Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * mmc: uniphier-sd: move uniphier_sd_init() belowMasahiro Yamada2016-08-28-21/+19
| | | | | | | | | | | | | | | | No more reason to define this function above the ops structure. Move it near the caller. Also, change its return type to void because it never fails. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * mmc: uniphier-sd: migrate to CONFIG_DM_MMC_OPSMasahiro Yamada2016-08-28-47/+51
| | | | | | | | | | | | | | | | | | Catch up with the DM migration. As struct dm_mmc_ops does not have .init callback, call the init function directly from the probe function. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * mmc: uniphier-sd: add static qualifiers to probe and remove callbacksMasahiro Yamada2016-08-28-2/+2
| | | | | | | | | | | | They are both only referenced in this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | sunxi: display: Use PWM to drive backlight where applicableHans de Goede2016-08-26-0/+11
|/ | | | | | | | | | | | | | | | | | | | | When the backlight's pwm input is connected to a pwm output of the SoC, actually use pwm to drive the backlight. The mean reason for doing this is to fix the backlight turning off for aprox. 1 second while the kernel is booting. This is caused by the kernel actually using pwm to drive the backlight, so that it can dim the backlight. First the pwm driver loads and switches the pinmux for the pin driving the backlight's pwm input to the pwm controller. Then about 1s later the actual backlight driver loads and tells the pwm driver to actually update the pwm settings, which have a power-on-reset value of "off". An additional advantage is that this allows us to initatiate the backlight at 80%, which is the kernel default, avoiding a brightness change while the kernel loads. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed by: Peter Korsgaard <peter@korsgaard.com>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2016-08-26-2/+2
|\
| * i2c: mvtwsi: Fix order of address bytes (high to low)Stefan Roese2016-08-26-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Patch f8a10ed1 [i2c: mvtwsi: Make address length variable] accidentally inverted the sequence of address bytes sent to the I2C device. This patch corrects this by sending the highest byte first and the lowest byte last again. Tested on theadorable Armada-XP board. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Mario Six <mario.six@gdsys.cc> Cc: Heiko Schocher <hs@denx.de>
* | spi: tegra: fix hang in set_mode()Stephen Warren2016-08-25-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In tegra20_slink.c, the set_mode() function may be executed before the SPI bus is claimed the first time, and hence the clocks to the SPI controller may not be running. If so, any register read/write at this time will hang the CPU. Fix this by ensuring the clock is running as soon as the driver is probed. This is observed on the Tegra30 Beaver board. Apply the same clock initialization fix to all other Tegra SPI drivers so that if set_mode() is ever implemented there, the same bug will not appear. Note that tegra114_spi.c already operates in this fashion. The clock manipulation code is copied from claim_bus() to probe() rather than moved. This ensures that any calls to set_speed() take effect; the clock can't be set once during probe and left unchanged. Fixes: 5cb1b7b395c0 ("spi: tegra20: Add support for mode selection") Cc: Mirza Krak <mirza.krak@hostmobility.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: remove stale nvidia, bpmp I2C DT propertyStephen Warren2016-08-25-10/+0
| | | | | | | | | | | | | | | | | | | | The nvidia,bpmp property is left over from an old BPMP I2C binding, and shouldn't be present. Remove it from the SoC DT file, and update the I2C driver not to parse it; the value wasn't used for anything any more anyway. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: fix Tegra186 SDHCI clock/reset namesStephen Warren2016-08-25-3/+3
| | | | | | | | | | | | | | | | | | The Tegra SDHCI binding dictates that the reseet name for the Tegra SDHCI clock be "sdhci" not "sdmmc", and that the clock is accessed by index rather than by name. Fix the Tegra186 DT and MMC driver to honor this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | ARM: tegra: fix Tegra186 I2C clock nameStephen Warren2016-08-25-1/+1
|/ | | | | | | | The Tegra I2C binding dictates that the clock name for the Tegra I2C clock be "div-clk" not "i2c". Fix the Tegra186 DT and I2C driver to honor this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* net: davinci_emac: Restore the internal MDIO accessors return valueskarl beldan2016-08-22-7/+6
| | | | | | | | | | | | | | | | | The spatch series converting legacy drivers from miiphy_register to mdio_register changed the return convention of the davinci_emac internal MDIO accessors, making the internal code relying on it misbehaving: no mdiodev get registered and U-Boot crashes when using net cmds in the context of the old legacy net API. ATM davinci_emac_initialize and cpu_eth_init don't return a proper value in that case but fixing them would not avoid the crash. This change is just a follow-up to the spatch pass, the MDIO accessors of the mdiodev introduced by the spatch pass retain their proper values. Signed-off-by: Karl Beldan <karl.beldan+oss@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* net/fm: Remove unused code of FMan QMIHou Zhiqiang2016-08-22-3/+0
| | | | | | | | The QMan is not used in FMan IM mode, so no QMI enqueue or QMI dequeue are performed. Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
generated by cgit v1.1 at 2024-11-10 00:54:56 +0000