summaryrefslogtreecommitdiff
path: root/drivers
Commit message (Collapse)AuthorAgeLines
* ARM: at91: atmel_nand: add code to check the ONFI parameter ECC requirementWu, Josh2013-08-22-2/+128
| | | | | | | | | | | | | | | | | | | | | | | | 1. if CONFIG_SYS_NAND_ONFI_DETECTION is defined, driver will check NAND flash's ecc minimum requirement in ONFI parameter. a) if CONFIG_PMECC_CAP, CONFIG_PMECC_SECTOR_SIZE are defined. then use it. Driver will display a WARNING if the values are different from ONFI parameters. b) if CONFIG_PMECC_CAP, CONFIG_PMECC_SECTOR_SIZE are not defined, then use the value from ONFI parameters. * If ONFI ECC parameters are in ONFI extended parameter page, since we are not support it, so assume the minimum ecc requirement is 2 bits in 512 bytes. * For non-ONFI support nand flash, also assume the minimum ecc requirement is 2 bits in 512 bytes. 2. if CONFIG_SYS_NAND_ONFI_DETECTION is not defined, just use CONFIG_PMECC_CAP and CONFIG_PMECC_SECTOR_SIZE. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* mtd: atmel_nand: alloc memory instead of use static array for pmecc dataWu, Josh2013-08-22-7/+56
| | | | | | | | In this way, the pmecc corraction capbility can change in run time. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* linux/compat.h: move dev_err, dev_info and dev_dbg from usb driver to compat.hWu, Josh2013-08-22-16/+0
| | | | | | | | | | | | Since kernel code current use many dev_xxx() instead of using printk. To compatible, move those dev_xxx from usb driver to linux/compat.h. Then all driver code can use dev_err, dev_info and dev_vdbg. This patch also removed duplicated macro definitions in usb driver. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* ARM: at91: atmel_nand: pmecc driver will select the galois table by sector sizeWu, Josh2013-08-22-1/+4
| | | | | | | | | | Define the galois index table offset in chip head file. So user do not need to set by himself. Driver will set it correctly according to sector_size. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Scott Wood <scottwood@freescale.com> [rebased on master] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* net: macb: fix the following building warningBo Shen2013-08-22-3/+9
| | | | | | | | | | | | fix the following building warning ---8>--- macb.c: In function 'macb_init': macb.c:400:14: warning: 'phydev' may be used uninitialized in this function macb.c:377:21: note: 'phydev' was declared here ---<8--- Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-08-17-4/+5
|\
| * Merge git://git.denx.de/u-boot-armStefano Babic2013-07-31-9255/+2352
| |\ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/freescale/mx6qsabrelite/Makefile board/freescale/mx6qsabrelite/mx6qsabrelite.c include/configs/mx6qsabrelite.h Signed-off-by: Stefano Babic <sbabic@denx.de>
| * | mxc_ipuv3: fix memory alignment of framebufferEric Nelson2013-07-29-2/+3
| | | | | | | | | | | | | | | | | | The frame-buffer on i.MX boards needs to be aligned for DMA. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * | mxc_gpio: Correct the GPIO handling in gpio_direction_output()Dirk Behme2013-07-24-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Setting the direction and an output value should be done by First, set the desired output value. Then, switch to output. If this is done in the inverse order, like at the moment, there can be a glitch on the GPIO line while switching first the old output value and aftwards the new one. Fix this by inverting the order of the direction/set_value calls. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | | Prepare for TI816X : reuse existing code from TI814XTENART Antoine2013-08-15-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Rename some CONFIG_TI814X to a more generic CONFIG_TI81XX Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com> [trini: Adapt for CONFIG_OMAP_COMMON changes, AM43XX] Signed-off-by: Tom Rini <trini@ti.com>
* | | ARM: AM43xx: Add build supportLokesh Vutla2013-08-15-2/+3
| | | | | | | | | | | | | | | | | | Add AM43xx support in the required places Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | | musb: Disable extra printsLokesh Vutla2013-08-15-12/+8
| |/ |/| | | | | | | | | | | | | | | | | There are many musb prints in SPL and U-Boot log. These prints are required only during musb debug. So replacing printk with pr_debug in musb_core. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Tested-by: Heiko Schocher <hs@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
* | gpio: tca642x: Add the tca642x gpio expander driverDan Murphy2013-07-30-0/+334
| | | | | | | | | | | | | | | | | | Add the tca642x gpio expander driver Datasheet: http://www.ti.com/product/tca6424a Signed-off-by: Dan Murphy <dmurphy@ti.com>
* | net, phy, cpsw: fix gigabit register accessHeiko Schocher2013-07-30-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | accessing a lan9303 switch with the cpsw driver results in wrong speed detection, as the switch sets the BMSR_ERCAP in BMSR register, and follow read of the MII_STAT1000 register fails, as the switch does not support it. Current code did not check, if a phy_read() fails ... fix this. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Joe Hershberger <joe.hershberger@gmail.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
* | drivers: net: cpsw: Enable statistics for all portMugunthan V N2013-07-26-0/+1
| | | | | | | | | | | | Enable hardware statistics for all ports, enabling only to host port is useless Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* | drivers: net: cpsw: remove hard coding bd ram for cpswMugunthan V N2013-07-26-3/+1
| | | | | | | | | | | | | | BD ram address may vary in various SOC, so removing the hardcoding and passing the same information through platform data Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* | Merge branch 'u-boot/master' into u-boot-arm/masterAlbert ARIBAUD2013-07-25-9249/+2009
|\ \
| * \ Merge branch 'master' of git://git.denx.de/u-boot-nds32Tom Rini2013-07-25-86/+8
| |\ \
| | * | pci: move pci_ftpci100.h to include/faraday/ftpci100.hGabor Juhos2013-07-24-98/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even though the header files is used only by the pci_ftpci100 driver, it contains declaration for a function which is used by external code. Move the header file to a common location which lets external code use it. Compile tested only. Cc: Macpaul Lin <macpaul@andestech.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
| | * | pci: add prototype for pci_ftpci_init() functionGabor Juhos2013-07-24-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pci_ftpci_init() function is implemented in 'drivers/pci/pci_ftpci100.c' however it is always called by external code. Add function declaration into ftpci100.h to make it visible for external code. Compile tested only. Cc: Macpaul Lin <macpaul@andestech.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
| | * | block: constify sect_buf argument of ide_write_dataGabor Juhos2013-07-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a const keyword to the sect_buf argument of ide_write_data to fix the following warning: cmd_ide.c: In function '__ide_output_data': cmd_ide.c:548: warning: passing argument 2 of 'ide_write_data' discards qualifiers from pointer target type /devel/u-boot.git/include/ide.h:76: note: expected 'ulong *' but argument is of type 'const ulong *' Also modify the driver-model documentation to match with the new prototype. Compile tested only. Cc: Macpaul Lin <macpaul@andestech.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
| | * | mmc: ftsdc010_mci: fix build error if CONFIG_FTSDC010_SDIO is not definedGabor Juhos2013-07-24-1/+5
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The FTSDC010_DCR_FIFO_RST symbol is conditionally defined in <faraday/ftsdc010.h> and it is available available when CONFIG_FTSDC010_SDIO is enabled. However the actual driver code unconditionally uses the FTSDC010_DCR_FIFO_RST constant and this causes build error if CONFIG_FTSDC010_SDIO is not enabled. The following error happens when compiling for the adp-ag101 board: ftsdc010_mci.c: In function 'ftsdc010_request': ftsdc010_mci.c:178: error: 'FTSDC010_DCR_FIFO_RST' undeclared (first use in this function) ftsdc010_mci.c:178: error: (Each undeclared identifier is reported only once ftsdc010_mci.c:178: error: for each function it appears in.) The patch ensures that the FTSDC010_DCR_FIFO_RST symbol gets used only if CONFIG_FTSDC010_SDIO is defined. Compile tested only. Cc: Kuo-Jung Su <dantesu@faraday-tech.com> Cc: Macpaul Lin <macpaul@andestech.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Reviewed-by: Kuo-Jung Su <dantesu@faraday-tech.com>
| * | qemu-malta: Update for SPDX license identifiersTom Rini2013-07-25-3/+1
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2013-07-25-1/+180
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflict over SPDX changes means that one change was effectively dropped as it was fixing typos in a removed hunk of text. Conflicts: arch/mips/cpu/mips64/start.S Signed-off-by: Tom Rini <trini@ti.com>
| | * | MIPS: qemu-malta: add PCI supportGabor Juhos2013-07-24-0/+179
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qemu emulates the Galileo GT64120 System Controller which provides a CPU bus to PCI bus bridge. The patch adds driver for this bridge and enables PCI support for the emulated Malta board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
| | * | net: pcnet: use pci_virt_to_mem to obtain buffer addressesGabor Juhos2013-07-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pcnet driver uses the pci_phys_to_mem function to get the memory address of the DMA buffers. This This assumes an 1:1 mapping between the PCI and physical memory which is not true on all platforms. On MIPS platform U-Boot is running within a mapped memory region, and the pci_phys_to_mem macro can't be used to obtain the memory address of the buffers. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
| * | | drivers/i2c: Update fti2c010.[ch], i2c_core.c to use SPDX identifiersTom Rini2013-07-25-17/+3
| | | | | | | | | | | | | | | | | | | | Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2013-07-24-333/+1236
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
| | * | i2c: add Faraday FTI2C010 I2C controller supportKuo-Jung Su2013-07-23-0/+451
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Faraday FTI2C010 is a multi-function I2C controller which supports both master and slave mode. This patch simplily implements the master mode only. Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com> CC: Heiko Schocher <hs@denx.de>
| | * | I2C: mxc_i2c: Add support for Vybrid VF610 platformAlison Wang2013-07-23-7/+55
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Vybrid VF610 platform. There are some differences between i.MX6 and Vybrid for I2C controller. (1) The registers' offset are different. (2) The I2C clock divider values are different. (3) In I2C control register, the enable/disable/reset bit is inverted for Vybrid comparing to i.MX6. (4) In I2C status register, the interrupt flag bit is cleared by writing "1" for Vybrid. For i.MX6, this bit is cleared by writing "0". (5) In I2C status register, the arbitration lost flag bit is cleared by writing "1" for Vybrid. For i.MX6, this bit is cleared by writing "0". Signed-off-by: Alison Wang <b18965@freescale.com>
| | * | i2c, ppc4xx_i2c: switch to new multibus/multiadapter supportDirk Eibach2013-07-23-98/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Heiko Schocher <hs@denx.de> Cc: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
| | * | tegra: i2c: Enable new CONFIG_SYS_I2C frameworkSimon Glass2013-07-23-49/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables CONFIG_SYS_I2C on Tegra, updating existing boards and the Tegra i2c driver to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heiko Schocher <hs@denx.de>
| | * | tegra: i2c: Add function to know about current busSimon Glass2013-07-23-17/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rather than using a variable in various places, add a single function, tegra_i2c_get_bus(), which returns a pointer to information about a bus. This will make it easier to move to the new i2c framework. Signed-off-by: Simon Glass <sjg@chromium.org>
| | * | i2c, fsl_i2c: switch to new multibus/multiadapter supportHeiko Schocher2013-07-23-134/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - added to fsl_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
| | * | i2c, soft-i2c: switch to new multibus/multiadapter supportHeiko Schocher2013-07-23-48/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - added to soft_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
| | * | i2c: add i2c_core and prepare for new multibus supportHeiko Schocher2013-07-23-0/+415
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This Patch introduce the new i2c_core file, which holds the I2C core functions, for the rework of the multibus/ multiadapter support. Also adds changes in i2c.h for the new I2C multibus/multiadapter support. This new support can be activated with the CONFIG_SYS_I2C define. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
| * | Add LGPL-2.1+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-4/+1
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-8826/+601
| |/ | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* | net: calxedaxgmac: enable rx cut-thruRob Herring2013-07-25-1/+1
|/ | | | | | | There is no reason to wait for the entire frame to start DMA on receive, so enable rx cut-thru for better performance. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* net: phy: Set SUPPORTED_1000baseX_Half flag in ESTATUS_1000_XHALF caseFabio Estevam2013-07-19-1/+1
| | | | | | | | | | | | | Commit de1d786e (add support for Xilinx 1000BASE-X phy (GTX)) introduced the checking for ESTATUS_1000_XHALF, but it incorrectly sets the SUPPORTED_1000baseX_Full flag in this case. Set the SUPPORTED_1000baseX_Half flag instead. Acked-by: Charles Coldwell <coldwell@gmail.com> Reviewed-By: Sascha Silbe <t-uboot@infra-silbe.de> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* phy: fix 10/100Mbps operation on 1Gbps-capable linksSascha Silbe2013-07-19-1/+9
| | | | | | | | | | | | | | | | | de1d786 [add support for Xilinx 1000BASE-X phy (GTX)] introduced a check for the extended status register in order to support 1Gbps-capable PHYs that don't have the 1000BASE-T registers. Since Extended Status only indicates what the PHY (i.e. the local side) is capable of, this broke communication with non-1Gbps peers. Only check the extended status if the 1000BASE-T registers are actually missing so we don't end up setting speed to 1Gbps even though the previous test (for the combination of local and peer support for 1Gbps) already indicated we can't do 1Gbps with the current peer. Signed-off-by: Sascha Silbe <t-uboot@infra-silbe.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mmcTom Rini2013-07-16-5/+4
|\
| * fsl_esdhc: Touch only relevant sys ctrl bitsDirk Behme2013-07-16-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Dealing with the sys ctrl register should touch only the relevant bits and not accidently the whole register. On i.MX6, the sys control register contains bits which shouldn't be reset to 0, e.g. SYS_CTRL[3-0] and IPP_RST_N (SYS_CTRL[23]). Do this by read/modify/write instead of just a 32bit write. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * drivers/mmc/dw_mmc - remove extra arch specific "asm/arch/clk.h" inclusionAlexey Brodkin2013-07-16-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. No contents of "asm/arch/clk.h" is used within "dw_mmc.c". 2. If arch doesn't have "asm/arch/clk.h" driver won't build. Without mentioned inclusion dw_mmc driver could be built for arches other than ARM. For ARM driver still builds without it. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Mischa Jonker <mjonker@synopsys.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Rajeshwari Shinde <rajeshwari.s@samsung.com> Cc: Amar <amarendra.xt@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * Powerpc: eSDHC: Fix mmc read write err in uboot of T4240QDS boardHaijun.Zhang2013-07-16-1/+1
| | | | | | | | | | | | | | | | | | Fill the right command type when using CMD12 to stop data transfer. Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> CC: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> CC: Scott Wood <scottwood@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | Add Atmel I2C tpmDirk Eibach2013-07-16-0/+122
| | | | | | | | | | | | | | | | | | Add support for Atmel TPM devices with two wire interface. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc> Reviewed-by: Simon Glass <sjg@chromium.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | i2c: fsl_i2c: i2c_read(): dont try to write address w/ alen=0Reinhard Pfau2013-07-16-3/+6
|/ | | | | | | | | if alen is 0: no longer start a write cycle before reading data. Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Fleming <afleming@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-nand-flashTom Rini2013-07-12-6/+4
|\
| * mtd: mxc_nand: Fix crash after MTD resyncMarek Vasut2013-07-12-6/+4
| | | | | | | | | | | | | | | | | | | | | | | | The driver triggered a BUG() in nand_base.c:3214/nand_scan_tail() because the ecc.strength was not set in NAND_ECC_HW_SYNDROME ECC mode. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Benoit Thebaudeau <benoit.thebaudeau@advansee.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-07-12-116/+434
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial. Conflicts: arch/arm/dts/exynos5250.dtsi Signed-off-by: Tom Rini <trini@ti.com>
generated by cgit v1.1 at 2024-11-15 01:58:09 +0000