summaryrefslogtreecommitdiff
path: root/drivers/pci
Commit message (Collapse)AuthorAgeLines
...
* dm: pci: Add a dm_ prefix to pci_bus_find_bdf()Simon Glass2016-01-12-1/+1
| | | | | | | | | | | | Most driver model PCI functions have a dm_ prefix. At some point, when the old code is converted to driver model and the old functions are removed, we will drop that prefix. For consistency, we should use the dm_ prefix for all driver model functions. Update pci_bus_find_bdf() accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: pci: Add a dm_ prefix to pci_get_bdf()Simon Glass2016-01-12-5/+6
| | | | | | | | | | | | Most driver model PCI functions have a dm_ prefix. At some point, when the old code is converted to driver model and the old functions are removed, we will drop that prefix. For consistency, we should use the dm_ prefix for all driver model functions. Update pci_get_bdf() accordingly. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: pci: Mark legacy files as suchSimon Glass2016-01-12-4/+10
| | | | | | | | We don't want people changing the legacy PCI files while migration is in progress. Update the file headers to indicate that. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* pci: layerscape: Adjust the return value when ls_pcie_addr_valid() failsBin Meng2016-01-08-1/+1
| | | | | | | | | When trying to access non-existent/unsupported PCI devices in ls_pcie_read_config(), when ls_pcie_addr_valid() fails it returns error code and fills in the result with 0xffffffff manually. But it really should return zero to upper layer codes. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* pci: imx: Adjust the return value when imx_pcie_addr_valid() failsBin Meng2016-01-08-1/+1
| | | | | | | | | | | When trying to access non-existent/unsupported PCI devices in imx_pcie_read_config(), when imx_pcie_addr_valid() fails it returns error code and fills in the result with 0xffffffff manually. But it really should return zero to upper layer codes. Reported-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
* x86: Remove HAVE_ACPI_RESUMEBin Meng2015-12-09-8/+0
| | | | | | | | | These are currently dead codes. Until we have complete ACPI support, we don't know if it works or not. Remove to avoid confusion. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* dm: pci: Disable PCI compatibility functions by defaultSimon Glass2015-12-01-1/+11
| | | | | | | | | We eventually need to drop the compatibility functions for driver model. As a first step, create a configuration option to enable them and hide them when the option is disabled. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: pci: Move common auto-config functions to a common fileSimon Glass2015-12-01-117/+129
| | | | | | | | Some functions will be used by driver model and legacy PCI code. To avoid duplication, put these in a separate, shared file. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: pci: Rename pci_auto.c to pci_auto_old.cSimon Glass2015-12-01-1/+1
| | | | | | | | This file should not be used with driver model as it has lots of legacy/ compatibility functions. Rename it to make this clear. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: tegra: pci: Convert tegra boards to driver model for PCISimon Glass2015-12-01-322/+155
| | | | | | | | | Adjust the Tegra PCI driver to support driver model and move all boards over at the same time. This can make use of some generic driver model code, such as the range-decoding logic. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: pci: Add a function to find the regions for a PCI busSimon Glass2015-12-01-0/+30
| | | | | | | | | This function looks up the controller and returns a pointer to each region type. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: pci: Add a function to get the controller for a busSimon Glass2015-12-01-0/+8
| | | | | | | | | A PCI bus may be a bridge device where the controller is the bridge's parent. Add a function to return the controller device, given a PCI device. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: pci: Add functions to emulate 8- and 16-bit accessSimon Glass2015-12-01-0/+39
| | | | | | | | | Provide a few functions to support using 32-bit access to emulate 8- and 16-bit access. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: pci: Support decoding ranges with duplicate entriesSimon Glass2015-12-01-3/+10
| | | | | | | | | | | | | | | | | | At present we add a new resource entry for every range entry. But some range entries refer to configuration regions. To make this work, avoid adding two regions of the same type. The later ranges will overwrite the earlier (configuration) ones. There does not seem to be a way to distinguish the configuration ranges other than by ordering (as per the device tree binding). We could perhaps instead just store one region of each type in a simple array. Once we are sure that we don't need to support multiple regions, we could change this. It would be easier to do it when all drivers are converted to use driver model for PCI. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: pci: Set up the SDRAM mapping correctlySimon Glass2015-12-01-6/+9
| | | | | | | | | | SDRAM doesn't always start at 0. Adjust the region mapping so that it works on platforms where SDRAM is somewhere else. This needs testing on other platforms. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
* dm: tegra: pci: Move CONFIG_PCI_TEGRA to KconfigSimon Glass2015-12-01-0/+10
| | | | | | | Move this option to Kconfig and fix up all users. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Stephen Warren <swarren@nvidia.com>
* pci/layerscape: add support for LS1043A PCIe LUT register accessMingkai Hu2015-11-30-7/+7
| | | | | | | | | | | The endian and base address of PEX LUT register region is different between Chassis 2 and Chassis 3, so move the base address definition to chassis specific header file and add pex_lut_* functions to access LUT register. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8: ls2085a: Add support of LS2085A SoCPrabhakar Kushwaha2015-11-30-1/+1
| | | | | | | | | | | | | Freescale's LS2085A is a another personality of LS2080A SoC with support of AIOP and DP-DDR. This Patch adds support of LS2085A Personality. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Updated MAINTAINERS files Dropped #ifdef in cpu.h Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by: York Sun <yorksun@freescale.com>
* armv8: LS2080A: Rename LS2085A to reflect LS2080APrabhakar Kushwaha2015-11-30-1/+1
| | | | | | | | | | | LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun <yorksun@freescale.com>
* pci: fix address range check in __pci_hose_phys_to_bus()Marcel Ziswiler2015-11-23-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | The address range check may overflow if the memory region is located at the top of the 32-bit address space. This can e.g. be seen on TK1 if using the E1000 gigabit Ethernet driver where start and size are both 0x80000000 leading to the following messages: Apalis TK1 # tftpboot $loadaddr test_file Using e1000#0 device TFTP from server 192.168.10.1; our IP address is 192.168.10.2 Filename 'test_file'. Load address: 0x80408000 Loading: pci_hose_phys_to_bus: invalid physical address This patch fixes this by changing the order of the addition vs. subtraction in the range check just like already done in __pci_hose_bus_to_phys(). Reported-by: Ivan Mercier <ivan.mercier@nexvision.fr> Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-tegraTom Rini2015-11-12-6/+77
|\
| * pci: tegra: add/enable support for Tegra210Stephen Warren2015-11-12-0/+22
| | | | | | | | | | | | | | | | | | This needs a separate compatible value from Tegra124 since the new HW version has bugs that would prevent a driver for previous HW versions from operating at all. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * pci: tegra: call tegra_pcie_board_init() earlierStephen Warren2015-11-12-2/+2
| | | | | | | | | | | | | | | | | | | | The board PCI setup code may control regulators that are required simply to bring up the PCI controller itself (or PLLs, IOs, ... it uses). Move the call to this function earlier so that all board-provided resources are ready early enough for everything to work. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * pci: tegra: implement PCA enable workaroundStephen Warren2015-11-12-0/+14
| | | | | | | | | | | | | | | | | | | | Tegra210's PCIe controller has a bug that requires the PCA (performance counter) feature to be enabled. If this isn't done, accesses to device configuration space will hang the chip for tens of seconds. Implement the workaround. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * pci: tegra: use #address-/size-cells from DTStephen Warren2015-11-12-3/+30
| | | | | | | | | | | | | | | | | | The number of cells used by each entry in the DT ranges property is determined by the #address-cells/#size-cells properties. Fix the code to respect this. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * pci: tegra: clip RAM size to 32-bitsStephen Warren2015-11-12-1/+9
| | | | | | | | | | | | | | | | | | Tegra peripherals can generally access a 32-bit physical address space, and I believe this applies to PCIe. Clip the PCI region that refers to DRAM so it fits into 32-bits to avoid issues. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | pci: fix checking PCI_REGION_MEM in pci_hose_phys_to_bus()Cheng Gu2015-11-12-2/+2
|/ | | | | | | | | | | | | | | When converting between PCI bus and phys addresses, a two pass search was introduced with preference to non-PCI_REGION_SYS_MEMORY regions. See commit 2d43e873a29ca4959ba6a30fc7fb396d3fd0dccf. However, since PCI_REGION_MEM is defined as 0, the if statement was always asserted true: ((flags & PCI_REGION_MEM) == PCI_REGION_MEM) This patch uses PCI_REGION_TYPE bit to check if the region is PCI_REGION_MEM: ((flags & PCI_REGION_TYPE) == PCI_REGION_MEM) Signed-off-by: Cheng Gu <chenggu@marvell.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* armv8/fsl_lsch3: Change arch to fsl-layerscapeMingkai Hu2015-10-29-1/+3
| | | | | | | | | | | | | There are two LS series processors are built on ARMv8 Layersacpe architecture currently, LS2085A and LS1043A. They are based on ARMv8 core although use different chassis, so create fsl-layerscape to refactor the common code for the LS series processors which also paves the way for adding LS1043A platform. Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com> Signed-off-by: Hou Zhiqiang <B48286@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* dm: pci: Enable VGA address forwarding on bridgesBin Meng2015-10-21-0/+18
| | | | | | | | | To support graphics card behind a PCI bridge, the bridge control register (offset 0x3e) in the configuration space must turn on VGA address forwarding. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: pci: Fix pci_last_busno() to return the real last bus noBin Meng2015-10-21-24/+1
| | | | | | | | | Currently pci_last_busno() only checks the last bridge device under the first UCLASS_PCI device. This is not the case when there are multiple bridge devices. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* pci: Set PCI_COMMAND_IO bit for VGA deviceBin Meng2015-10-21-0/+6
| | | | | | | | PCI_COMMAND_IO bit must be set for VGA device as it needs to respond to legacy VGA IO address. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: pci: Adjust pci_find_and_bind_driver() to return -EPERMSimon Glass2015-10-21-12/+19
| | | | | | | | | | | | | | The current code returns 0 even if it failed to find or bind a driver. The caller then has to check the returned device to see if it is NULL. It is better to return an error code in this case so that it is clear what happened. Adjust the code to return -EPERM, indicating that the device was not bound because it is not needed for pre-relocation use. Add comments so that the return value is clear. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: pci: Correct a few debug() statementsSimon Glass2015-10-21-2/+2
| | | | | | | | One debug() statement is missing a newline. The other has a repeated word. Fix these. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: pci: Tidy up auto-config error handlingSimon Glass2015-10-21-3/+12
| | | | | | | | | | | When the auto-configuration process fails for a device (generally due to lack of memory) we should return the error correctly so that we don't continue to try memory allocations which will fail. Adjust the code to check for errors and abort if something goes wrong. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* pci: pcie_imx: Fix hang on mx6qpFabio Estevam2015-10-15-0/+8
| | | | | | | | | | | PCI driver currently hangs on mx6qp. Toggle the reset bit with the appropriate timings to fix the issue. Based on the FSL kernel driver implementation. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* pci: Fix expansion ROM programming for multi-function devicesBin Meng2015-10-08-0/+1
| | | | | | | | | PCI_HEADER_TYPE register (offset 0x0e) bit 7 is an indicator for multi-function devices. We should mask it off before using it as the header type. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: pci: Add an inline API to test if a device is on a PCI busBin Meng2015-09-16-2/+2
| | | | | | | | Introduce device_is_on_pci_bus() which can be utilized by driver to test if a device is on a PCI bus. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* pcie_imx: Use 'ms' for millisecondsFabio Estevam2015-09-13-3/+3
| | | | | | | milliseconds should be written as 'ms' instead of 'mS'. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Tested-by: Marek Vasut <marex@denx.de>
* dm: pci: Allow a PCI bus to be found without an aliasSimon Glass2015-09-09-4/+24
| | | | | | | | | | | | | | At present, until a PCI bus is probed, it cannot be found by its sequence number unless it has an alias. This is the same with any device. However with PCI this is more annoying than usual, since bus 0 is always the same device. Add a function that tries a little harder to locate PCI bus 0. This means that PCI enumeration will happen automatically on the first access. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* pci/layerscape: Setup mmu-masters property for the PCIeVarun Sethi2015-09-01-0/+9
| | | | | | | | | Setup mmu-masters property for the PCIe controllers. This would be used by the Linux SMMU driver, while setting up stream ID table mappings for the PCIe devices. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* dm: pci: Optimize pci_uclass_post_bind()Bin Meng2015-08-26-0/+7
| | | | | | | | If there is no pci device listed in the device tree, don't bother scanning the device tree. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: pci: Save devfn without bus number in pci_uclass_child_post_bind()Bin Meng2015-08-26-2/+2
| | | | | | | | In pci_uclass_child_post_bind(), bdf is extracted from fdt_pci_addr. Mask bus number before save it to pplat->devfn. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: fsp: Call fsp_init_phase_pci() in pci_uclass_post_probe()Bin Meng2015-08-26-0/+21
| | | | | | | | | | | | | | | | | Per Intel FSP specification, we should call FSP notify API to inform FSP that PCI enumeration has been done so that FSP will do any necessary initialization as required by the chipset's BIOS Writer's Guide (BWG). Unfortunately we have to put this call here as with driver model, the enumeration is all done on a lazy basis as needed, so until something is touched on PCI it won't happen. Note we only call this after U-Boot is relocated and root bus has finished probing. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* dm: pci: Support selected device/driver binding before relocationBin Meng2015-08-26-11/+30
| | | | | | | | | | | On some platforms pci devices behind bridge need to be probed (eg: a pci uart on recent x86 chipset) before relocation. But we won't bind all devices found during the enumeration. Only devices whose driver with DM_FLAG_PRE_RELOC set will be bound. Any other generic devices except bridges won't be bound. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* x86: Set up video framebuffer for coreboot before loading kernelBin Meng2015-08-26-2/+0
| | | | | | | | | Currenlty we only set up video framebuffer when VIDEO_VESA driver is used. With coreboot, VIDEO_COREBOOT driver is used instead. Since we already saved VESA mode in the VIDEO_COREBOOT driver, now we can also set up video framebuffer for coreboot before loading Linux kernel. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* video: coreboot: Save VESA mode for future useBin Meng2015-08-26-1/+1
| | | | | | | | When booting as a coreboot payload, the framebuffer details are passed from coreboot via configuration tables. We save these information into vesa_mode_info structure for future use. Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
* pci: mvebu: Add PCIe driverAnton Schubert2015-08-17-0/+424
| | | | | | | | | | | | | | | | | | | This adds a PCI driver for the controllers found on Marvell MVEBU SoCs. Besides the driver, this patch also removes the statically defined PCI MBUS windows. As they are not needed anymore, since this PCIe driver now creates the windows dynamically. Tested on Armada XP db-mv784mp-gp eval board using an Intel E1000 PCIe card in all 3 PCIe slots. And on the Armada 38x db-88f6820-gp eval board using this Intel E1000 PCIe card in the PCIe 0 slot. This port was done in cooperation with Anton Schubert. Signed-off-by: Anton Schubert <anton.schubert@gmx.de> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr> Cc: Dirk Eibach <eibach@gdsys.de>
* Revert "dm: pci: Allow scan bridge child devices before relocation"Simon Glass2015-08-14-0/+4
| | | | | | | | | | | | This reverts commit df189d9ba3f8fd1bc67e3c0c3c4ace16cd065ee1. Unfortunately this commit breaks chromebook_link because it adds lots of PCI devices before relocation and there is not enough pre-reloc malloc() memory. Rathar then increase this memory, revert for now until we figure this out. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: pci: Add a way to iterate through all PCI devicesSimon Glass2015-08-14-0/+60
| | | | | | | | | These functions allow iteration through all PCI devices including bridges. The children of each PCI bus are returned in turn. This can be useful for configuring, checking or enumerating all the devices. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
* dm: pci: Provide friendly config access functionsSimon Glass2015-08-14-0/+76
| | | | | | | | | At present there are no PCI functions which allow access to PCI configuration using a struct udevice. This is a sad situation for driver model as it makes use of PCI harder. Add these functions. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
generated by cgit v1.1 at 2024-11-08 12:37:14 +0000