summaryrefslogtreecommitdiff
path: root/drivers/ddr
Commit message (Collapse)AuthorAgeLines
* bitops: introduce BIT() definitionHeiko Schocher2015-09-11-2/+0
| | | | | | | | | | | introduce BIT() definition, used in at91_udc gadget driver. Signed-off-by: Heiko Schocher <hs@denx.de> [remove all other occurrences of BIT(x) definition] Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de>
* ddr: altera: Repair uninited variableMarek Vasut2015-08-23-1/+1
| | | | | | | | | | | | | Fix the following problem: drivers/ddr/altera/sequencer.c: In function 'sdram_calibration_full': drivers/ddr/altera/sequencer.c:1943:25: warning: 'found_failing_read' may be used uninitialized in this function [-Wmaybe-uninitialized] if (found_passing_read && found_failing_read) ^ drivers/ddr/altera/sequencer.c:1803:26: note: 'found_failing_read' was declared here u32 found_passing_read, found_failing_read, initial_failing_dtap; ^ Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: Replace float multiplication with integer oneMarek Vasut2015-08-23-1/+1
| | | | | | | | | | | | | | | | This gem is really really rare, there was an actual float used in the Altera DDR init code, which pulled in floating point ops from the libgcc, just wow. Since we don't support floating point operations the same way Linux does not support them, replace this with an integer multiplication and division combo. This removes some 2kiB of size from the SPL as the floating point ops are no longer pulled in from libgcc. This was detected by enabling CONFIG_USE_PRIVATE_LIBGCC=y , which does not contain the floating point bits. Signed-off-by: Marek Vasut <marex@denx.de>
* arm: mvebu: Add complete SDRAM ECC scrubbingStefan Roese2015-08-17-2/+2
| | | | | | | | | | | | This patch introduces the SDRAM scrubbing for ECC enabled board to fill/initialize the ECC bytes. This is done via the XOR engine to speed up the process. The scrubbing is a 2-stage process: 1) SPL scrubs the area 0 - 0x100.0000 (16MiB) for the main U-Boot 2) U-Boot scrubs the remaining SDRAM area(s) Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* arm: mvebu: sdram: Enable ECC support on Armada XPStefan Roese2015-08-17-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is tested on the DB-MV784MP-GP eval board. To really enable ECC support on this board the I2C EEPROM needs to get changed. As it saves the enabling of ECC support internally. For this the following commands can be used to enable ECC support on this board: Its recommended for first save (print) the value(s) in this EEPROM address: => i2c md 4e 0.1 2 0000: 05 00 .. To enable ECC support you need to set bit 1 in the 2nd byte: Marvell>> i2c mw 4e 1.1 02 Marvell>> i2c md 4e 0.1 2 0000: 05 02 .. To disable ECC support again, please use this command: Marvell>> i2c mw 4e 1.1 00 Marvell>> i2c md 4e 0.1 2 0000: 05 00 .. On other AXP boards, simply plugging an ECC DIMM should be enough to enable ECC support. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Luka Perkov <luka.perkov@sartura.hr>
* ddr: altera: sequencer: Clean checkpatch issuesMarek Vasut2015-08-08-71/+88
| | | | | | | | | Fix most of the dangling checkpatch issues, no functional change. There are still 7 warnings, 1 checks , but those are left in place for the sake of readability of the code. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Clean data typesMarek Vasut2015-08-08-48/+48
| | | | | | | Replace uintNN_t with uNN. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Pluck out misc macros from codeMarek Vasut2015-08-08-22/+15
| | | | | | | | | | | | | Actually convert the sequencer code to use socfpga_sdram_misc_config instead of the various macros. This is just an sed exercise here, no manual coding needed. This patch actually removes the need to include any board-specific files in sequencer.c , so sequencer.c namespace is now no longer poluted by QTS-generated macros. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Zap SEQ_T(INIT|RESET)_CNTR._VALMarek Vasut2015-08-08-49/+4
| | | | | | | | | This is another macro used to obfuscate the real code. The T(INIT|RESET)_CNTR._VAL is always defined, so this indirection is unnecessary. Get rid of this. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Zap VFIFO_SIZEMarek Vasut2015-08-08-7/+4
| | | | | | | Just use READ_VALID_FIFO_SIZE directly, no need for this macro obfuscation. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Wrap misc remaining macrosMarek Vasut2015-08-08-0/+2
| | | | | | | | | | | Introduce structure socfpga_sdram_misc_config to wrap the remaining misc configuration values in board file. Again, introduce a function, socfpga_get_sdram_misc_config(), which returns this the structure. This is almost the final step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Pluck out IO_* macros from codeMarek Vasut2015-08-08-101/+100
| | | | | | | | | Actually convert the sequencer code to use socfpga_sdram_io_config instead of the IO_* macros. This is just an sed excercise here, no manual coding needed. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Wrap IO_* macrosMarek Vasut2015-08-08-0/+2
| | | | | | | | | | | Introduce structure socfpga_sdram_io_config to wrap the IO configuration values in board file. Introduce socfpga_get_sdram_io_config() function, which returns this the structure. This is another step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Pluck out RW_MGR_* macros from codeMarek Vasut2015-08-08-154/+154
| | | | | | | | | Actually convert the sequencer code to use socfpga_sdram_rw_mgr_config instead of the RW_MGR_* macros. This is just an sed exercise here, no manual coding needed. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Wrap RW_MGR_* macrosMarek Vasut2015-08-08-0/+4
| | | | | | | | | | | Introduce structure socfpga_sdram_rw_mgr_config to wrap the RW manager configuration values in board file. Introduce a complementary function, socfpga_get_sdram_rwmgr_config(), which returns this the structure. This is another step toward wrapping the nasty QTS generated macros in board files and reducing the pollution of the namespace. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Wrap ac_rom_init and inst_rom_initMarek Vasut2015-08-08-6/+8
| | | | | | | | | | Introduce two wrapper functions, socfpga_get_seq_ac_init() and socfpga_get_seq_inst_init() to avoid direct inclusion of the sequencer_auto_ac_init.h and sequencer_auto_inst_init.h QTS generated files. This reduces namespace pollution again. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Zap bogus redefinition of RW_MGR_MEM_NUMBER_OF_RANKSMarek Vasut2015-08-08-1/+0
| | | | | | | | This is defined in the QTS-generated headers, so it must not be re-defined in sequencer.h . Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Zap unused params and macrosMarek Vasut2015-08-08-75/+5
| | | | | | | | These parameters are not used in the code, zap them and the macros which are used by them as well. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sequencer: Move qts-generated files to board dirMarek Vasut2015-08-08-605/+9
| | | | | | | | Move the files generated by QTS into the board directory, they should not be part of the driver files at all. Signed-off-by: Marek Vasut <marex@denx.de> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
* ddr: altera: sdram: Make sdram_start and sdram_end into u32Marek Vasut2015-08-08-11/+12
| | | | | | | | | | | | | | | | Originally, both sdram_start and sdram_end were 64b values. The sdram_start had no reason for being so, since our address space is only 32b, so switching sdram_start to u32 is simple. The sdram_end is a bit more complex, since it can actually be set to (1 << 32) if someone really wanted to use an SoCFPGA with 4 GiB of DRAM and fixed the code around a little. But, the code handling the protection rules internally decrements the sdram_end variable anyway. Thus, instead of calling the code and passing in the address of the SDRAM end, pass in the address already decremented by one. This lets the sdram_end be 32b as well. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Minor cleanup in sdram_get_rule()Marek Vasut2015-08-08-4/+4
| | | | | | Fix the data types and zap unnecessary type change. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Minor cleanup in sdram_set_rule()Marek Vasut2015-08-08-4/+4
| | | | | | Zap an obscure unneeded cast and clean other minor nits in this function. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Add missing kerneldocMarek Vasut2015-08-08-0/+12
| | | | | | | Add kerneldoc to functions which are missing it, but are already cleaned up. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_write_verify()Marek Vasut2015-08-08-25/+26
| | | | | | | | | Clean the function up so that it's obvious what it is doing, fix the formating strings in debug outputs, add kerneldoc. Make the function return proper errno-compliant return values and propagate this change throughout sdram.c Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_calculate_size() part 2Marek Vasut2015-08-08-23/+12
| | | | | | | | Clean up coding style, mostly clean up comments, add kerneldoc. Also, zap assignment of the "cs" variable, which is outright dead code, so just remove it. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_calculate_size() part 1Marek Vasut2015-08-08-9/+10
| | | | | | | | | Pluck out all of the CONFIG_HPS_SDR_CTRLCFG_* macros. This change makes sdram.c completely clear of these macros and allows removing of the ugly include of sdram.h . The namespace is now a much nicer place! Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Introduce socfpga_sdram_get_config()Marek Vasut2015-08-08-211/+5
| | | | | | | | | | Introduce socfpga_sdram_get_config() function implement in a board file, which returns the socfpga_sdram_config structure. This is the last step in cleaning up the socfpga_mmr_init_full(), but not the last step which allows removing the inclusion of sdram.h from drivers/ddr/altera/sdram.c thus far. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_mmr_init_full() part 8Marek Vasut2015-08-08-1/+2
| | | | | | Fix the return value so that standard errno return values can be used. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_mmr_init_full() part 7Marek Vasut2015-08-08-1/+6
| | | | | | Add kerneldoc. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_mmr_init_full() part 6Marek Vasut2015-08-08-10/+21
| | | | | | Pull out the block of register programming into a separate function. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_mmr_init_full() part 5Marek Vasut2015-08-08-10/+11
| | | | | | | | Rework remaining two register setting functions such that they only return the final register value. Move the register setting into the block of register I/O in sdram_mmr_init_full(). Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_mmr_init_full() part 4Marek Vasut2015-08-08-62/+36
| | | | | | | | | Merge sdr_set_*() functions which are just setting registers among the sea of register setting in sdram_mmr_init_full(). There is no need to keep them separate this way, there is nothing special about them. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_mmr_init_full() part 3Marek Vasut2015-08-08-28/+39
| | | | | | | Pluck out the remaining CONFIG_HPS_SDR_CTRLCFG_ and put it into the socfpga_sdram_config structure. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_mmr_init_full() part 2Marek Vasut2015-08-08-67/+83
| | | | | | | | Suck out all the CONFIG_HPS_SDR_CTRLCFG_* from sdram_mmr_init_full() into the socfpga_sdram_config structure. There is still one ugly macro left behind, but this will be taken care of in subsequent patch. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up sdram_mmr_init_full() part 1Marek Vasut2015-08-08-44/+0
| | | | | | | | Zap all the ad-hoc readbacks from the registers and other useless and broken debug output. This is really not useful and is only confusing. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Introduce socfpga_sdram_config() structureMarek Vasut2015-08-08-162/+179
| | | | | | | | | | | | Introduce this seemingly massive structure, which holds required values of all the registers of the SDRAM controller. The idea here is to avoid including the sdram.h header file, which is full of ad-hoc macros that polute the global namespace. Once the cleanup of sdram.c would be complete and all registers would be loaded from this new socfpga_sdram_config, a board file will only pass this structure into the sdram.c . This will hide all the horrors generated by QTS in the board directory. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up set_sdr_mp_threshold()Marek Vasut2015-08-08-13/+11
| | | | | | | Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up set_sdr_mp_pacing()Marek Vasut2015-08-08-21/+16
| | | | | | | Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up set_sdr_mp_weight()Marek Vasut2015-08-08-21/+16
| | | | | | | Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up set_sdr_fifo_cfg()Marek Vasut2015-08-08-7/+7
| | | | | | | Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up set_sdr_static_cfg()Marek Vasut2015-08-08-8/+7
| | | | | | | Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up set_sdr_addr_rw()Marek Vasut2015-08-08-20/+10
| | | | | | | Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up set_sdr_dram_timing*()Marek Vasut2015-08-08-93/+53
| | | | | | | | | | Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. Merge set_sdr_dram_timing{1,2,3,4,lowpwr}() into single function set_sdr_dram_timing() , since there's no point in keeping all this stuff separate anymore. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up set_sdr_ctrlcfg()Marek Vasut2015-08-08-38/+24
| | | | | | | | | | Get rid of the constant clrsetbits_le32(), instead prepare the whole content of the register once and write it at the end of the function. The big plan here is to remove all the CONFIG_HPS_SDR_ macros, hide them in QTS compatibility layer in board implementation and pass only a small structure into the driver. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up compute_errata_rows() part 2Marek Vasut2015-08-08-15/+20
| | | | | | | | Remove all parameters of this function, since they are only constants passed in from another function, so make them local. Also, rename the function to get_errata_rows() as this is closer to what it does. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Clean up compute_errata_rows() part 1Marek Vasut2015-08-08-7/+7
| | | | | | | Clean up weird parenthesis and odd type casts from the function. Fix comment style. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: sdram: Switch to generic_hweight32()Marek Vasut2015-08-08-1/+1
| | | | | | Use generic function instead of CPU-specific one. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: Clean up of delay_for_n_mem_clocks() part 5Marek Vasut2015-08-08-3/+5
| | | | | | Add kerneldoc. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: Clean up of delay_for_n_mem_clocks() part 4Marek Vasut2015-08-08-12/+5
| | | | | | | Simplify the loop code, optimizing compiler can deal with this. No functional change. Signed-off-by: Marek Vasut <marex@denx.de>
* ddr: altera: Clean up of delay_for_n_mem_clocks() part 3Marek Vasut2015-08-08-18/+6
| | | | | | Clean up the computation of c_loop, outer and inner variables. Signed-off-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-10 03:17:59 +0000