summaryrefslogtreecommitdiff
path: root/cpu
Commit message (Collapse)AuthorAgeLines
* ppc_4xx: Apply new HW register namesNiklaus Giger2009-10-07-41/+41
| | | | | | | | Modify all existing *.c files to use the new register names as seen in the AMCC manuals. Signed-off-by: Niklaus Giger <niklaus.giger@member.fsf.org> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Add PPC405EX(r) Rev D supportStefan Roese2009-10-07-10/+20
| | | | | | | | | | | | | | Unfortunately some Rev D PPC405EX/405EXr PVR's are identical with older 405EX(r) parts. Here a list: 0x12911475 - 405EX Rev D with Security *and* 405EX Rev A/B witout Sec 0x12911473 - 405EX Rev D without Security *and* 405EXr Rev A/B with Sec Since there are only a few older parts in the field, this patch now changes the PVR's above to represent the new Rev D versions. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Phong Vo" <pvo@amcc.com>
* ppc4xx: Fix msg "initialization as root-complex failed" upon PCIe scanStefan Roese2009-10-07-1/+2
| | | | | | | | | | This message is printed upon PCIe bus scan, not only upon error, but also if no PCIe device is detected at all. Since this is not an error, let's remove this message in this case. We already have the message "link is not up." if there is no PCIe device present. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Wolfgang Denk <wd@denx.de>
* PPC4xx: Denali core: Fix incorrect DDR row bitsMike Nuss2009-10-07-1/+1
| | | | | | | | | | | | | | The SPD detection code for the Denali memory controller used on some ppc4xx processors incorrectly encodes DDR0_42. With certain memory configurations, this can cause the bootwrapper to incorrectly calculate the installed memory size, because the number of row bits is wrong. This patch fixes that encoding. Signed-off-by: Mike Nuss <mike@terascala.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Merge PPC4xx DDR and DDR2 ECC handlingStefan Roese2009-10-02-250/+169
| | | | | | | | | | | | | | | | | This patch merges the ECC handling (ECC parity byte writing) into one file (ecc.c) for all PPC4xx SDRAM controllers except for PPC440EPx/GRx. This exception is because only those PPC's use the completely different Denali SDRAM controller core. Previously we had two routines to generate/write the ECC parity bytes. With this patch we now only have one core function left. Tested on Kilauea (no ECC) and Katmai (with and without ECC). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Felix Radensky <felix@embedded-sol.com> Cc: Grant Erickson <gerickson@nuovations.com> Cc: Pieter Voorthuijsen <pv@prodrive.nl>
* ppc4xx: Reorganize DDR2 ECC handlingFelix Radensky2009-10-02-207/+249
| | | | | | | | | | Reorganize DDR2 ECC handling to use common code for SPD DIMMs and soldered SDRAM. Also, use common code to display SDRAM info (ECC, CAS latency) for SPD and soldered SDRAM variants. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2009-09-30-80/+79
|\
| * ppc4xx: Remove mtsdram0() marcos and use common mtsdram() insteadStefan Roese2009-09-28-14/+13
| | | | | | | | | | | | Additionally some whitespace coding style fixes. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Convert PPC4xx SDRAM defines from lower case to upper caseStefan Roese2009-09-28-65/+65
| | | | | | | | | | | | | | | | | | The latest PPC4xx register cleanup patch missed some SDRAM defines. This patch now changes lower case UIC defines to upper case. Also some names are changed to match the naming in the IBM/AMCC users manuals (e.g. mem_mcopt1 -> SDRAM0_CFG). Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Convert PPC4xx UIC defines from lower case to upper caseStefan Roese2009-09-28-14/+14
| | | | | | | | | | | | | | The latest PPC4xx register cleanup patch missed the UIC defines. This patch now changes lower case UIC defines to upper case. Signed-off-by: Stefan Roese <sr@denx.de>
* | mpc83xx: retain POR values of non-configured ACR, SPCR, SCCR, and LCRR bitfieldsKim Phillips2009-09-26-107/+154
|/ | | | | | | | | | | | | | | | | | | some LCRR bits are not documented throughout the 83xx family RMs. New board porters copying similar board configurations might omit setting e.g., DBYP since it was not documented in their SoC's RM. Prevent them bricking their board by retaining power on reset values in bit fields that the board porter doesn't explicitly configure via CONFIG_SYS_<registername>_<bitfield> assignments in the board config file. also move LCRR assignment to cpu_init_r[am] to help ensure no transactions are being executed via the local bus while CLKDIV is being modified. also start to use i/o accessors. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mucmc52, uc101: delete ata@3a00 node, if no CF card is detectedHeiko Schocher2009-09-25-0/+20
| | | | | | | | | | | U-Boot can detect if an IDE device is present or not. If not, and this new config option is activated, U-Boot removes the ATA node from the DTS before booting Linux, so the Linux IDE driver does not probe the device and crash. This is needed for buggy hardware (uc101) where no pull down resistor is connected to the signal IDE5V_DD7. Signed-off-by: Heiko Schocher <hs@denx.de>
* mpc512x: Streamlined fixed_sdram() init sequence.Martha M Stan2009-09-25-35/+69
| | | | | | | | | | | | | | | | | | | Signed-off-by: Martha M Stan <mmarx@silicontkx.com> Minor cleanup: Re-ordered default_mddrc_config[] to have matching indices. This allows to use the same index "N" for source and target fields; before, we had code like this out_be32(&im->mddrc.ddr_time_config2, mddrc_config[3]); which always looked like a copy & paste error because 2 != 3. Also, use NULL when meaning a null pointer. Signed-off-by: Wolfgang Denk <wd@denx.de>
* ppc/p4080: Determine various chip frequencies on CoreNet platformsKumar Gala2009-09-24-4/+127
| | | | | | | | | | The means to determine the core, bus, and DDR frequencies are completely new on CoreNet style platforms. Additionally on p4080 we can have different frequencies for FMAN and PME IP blocks. We need to keep track of the FMAN & PME frequencies since they are used for time stamping capabilities inside each block. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/p4080: Handle timebase enabling and frequency reportingKumar Gala2009-09-24-1/+22
| | | | | | | | | On CoreNet style platforms the timebase frequency is the bus frequency defined by 16 (on PQ3 it is divide by 8). Also on the CoreNet platforms the core not longer controls the enabling of the timebase. We now need to enable the boot core's timebase via CCSR register writes. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/p4080: Add various p4080 related defines (and p4040)Kumar Gala2009-09-24-0/+5
| | | | | | | | | | | There are various locations that we have chip specific info: * Makefile for which ddr code to build * Added p4080 & p4040 to cpu_type_list and SVR list * Added number of LAWs for p4080 * Set CONFIG_MAX_CPUS to 8 for p4080 Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/p4080: CoreNet platfrom style secondary core releaseKumar Gala2009-09-24-3/+65
| | | | | | | | | The CoreNet platform style of bringing secondary cores out of reset is a bit different that the PQ3 style. Mostly the registers that we use to setup boot translation, enable time bases, and boot release the cores have moved around. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/p4080: CoreNet platfrom style CCSRBAR settingKumar Gala2009-09-24-18/+54
| | | | | | | | On CoreNet based platforms the CCSRBAR address is split between an high & low register and we no longer shift the address. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Scott Wood <scottwood@freescale.com>
* ppc/85xx: Fix enabling of L2 cacheKumar Gala2009-09-24-3/+4
| | | | | | | We need to flash invalidate the locks in addition to the cache before we enable. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx-fdt: Fixed l2-ctlr's compatible prop for QorIQVivek Mahajan2009-09-24-3/+10
| | | | | | | | The code assumed names where just numbers and always prefixed 'mpc'. However newer QorIQ don't follow the mpc naming scheme. Signed-off-by: Vivek Mahajan <vivek.mahajan@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: add cpu init config file for boot from NANDMingkai Hu2009-09-24-0/+63
| | | | | | | | | When boot from NAND, the NAND flash must be connected to br/or0. Also init RAM(L2 SRAM or DDR SDRAM) for load the second image to it. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: add ld script file for boot from NANDMingkai Hu2009-09-24-0/+67
| | | | | | | | | The first stage 4K image uses a seperate ld script file to generate 4K image. This patch moves it to the cpu/mpc85xx/* to make it avaliable for 85xx platform. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc4xx: Fix PCIE PLL lock on 440SPe Yucca boardRupjyoti Sarmah2009-09-23-8/+15
| | | | | | | | | | u-boot reports a PCIE PLL lock error at boot time on Yucca board, and left PCIe nonfunctional. This is fixed by making u-boot function ppc4xx_init_pcie() to wait 300 uS after negating reset before the first check of the PLL lock. Signed-off-by: Rupjyoti Sarmah <rsarmah@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Consolidate get_OPB_freq()Stefan Roese2009-09-17-75/+15
| | | | | | | | | | | | | All 4xx variants had their own, mostly identical get_OPB_freq() function. Some variants even only had the OPB frequency calculated in this routine and not supplied the sys_info.freqOPB variable correctly (e.g. 405EZ). This resulted in incorrect OPB values passed via the FDT to Linux. This patch now removes all those copies and only uses one function for all 4xx variants (except for IOP480 which doesn't have an OPB). Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix 405EZ uart base baud calculationStefan Roese2009-09-17-1/+5
| | | | | | | With this fix, Linux correctly configures the baudrate when booting with FDT passed from U-Boot to Linux. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc/85xx: Disable all async interrupt sources when we bootKumar Gala2009-09-15-0/+11
| | | | | | | | We should make sure to clear MSR[ME, CE, DE] when we boot an OS image since we have changed the exception vectors and the OSes vectors might not be setup we should avoid async interrupts at all costs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Split out cpu_init_early into its own file for NAND_SPLKumar Gala2009-09-15-51/+77
| | | | | | | By pulling out cpu_init_early we can build just it and not all of cpu_init for NAND_SPL. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Change cpu_init_early_f so we can use with NAND SPLKumar Gala2009-09-15-9/+25
| | | | | | | Use write_tlb and don't use memset so we can use the same code for cpu_init_early_f between NAND SPL and not. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: add boot from NAND/eSDHC/eSPI supportMingkai Hu2009-09-15-1/+181
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The MPC8536E is capable of booting form NAND/eSDHC/eSPI, this patch implements these three bootup methods in a unified way - all of these use the general cpu/mpc85xx/start.S, and load the main image to L2SRAM which lets us use the SPD to initialize the SDRAM. For all three bootup methods, the bootup process can be divided into two stages: the first stage will initialize the corresponding controller, configure the L2SRAM, then copy the second stage image to L2SRAM and jump to it. The second stage image is just like the general U-Boot image to configure all the hardware and boot up to U-Boot command line. When boot from NAND, the eLBC controller will first load the first stage image to internal 4K RAM buffer because it's also stored on the NAND flash. The first stage image, also call 4K NAND loader, will initialize the L2SRAM, load the second stage image to L2SRAM and jump to it. The 4K NAND loader's code comes from the corresponding nand_spl directory, along with the code twisted by CONFIG_NAND_SPL. When boot from eSDHC/eSPI, there's no such a first stage image because the CPU ROM code does the same work. It will initialize the L2SRAM according to the config addr/word pairs on the fixed address and initialize the eSDHC/eSPI controller, then load the second stage image to L2SRAM and jump to it. The macro CONFIG_SYS_RAMBOOT is used to control the code to produce the second stage image for all different bootup methods. It's set in the board config file when one of the bootup methods above is selected. Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Move code around to prep for NAND_SPLKumar Gala2009-09-15-23/+23
| | | | | | | | If we move some of the functions in tlb.c around we need less ifdefs. The first stage loader just needs invalidate_tlb and init_tlbs. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Repack tlb_table to save spaceKumar Gala2009-09-15-4/+5
| | | | | | | | We can pack the initial tlb_table in MAS register format and use write_tlb to set things up. This savings can be helpful for NAND style first stage boot loaders. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Introduce low level write_tlb functionKumar Gala2009-09-15-14/+26
| | | | | | | | | Factor out the code we use to actually write a tlb entry. set_tlb is a logical view of the TLB while write_tlb is a low level matching the MAS registers. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/8xxx: Misc DDR related fixesKumar Gala2009-09-15-7/+7
| | | | | | | * Fix setting of ESDMODE (MR1) register - the bit shifting was wrong * Fix the format string to match size in a debug print Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Remove some bogus code from external interrupt handler.Scott Wood2009-09-15-8/+1
| | | | | | | | | Skipping the interrupted instruction will accomplish nothing other than turning a spurious interrupt into a crash. External interrupts are not machine checks, so don't count them as such. Signed-off-by: Scott Wood <scottwood@freescale.com>
* ppc/85xx: Ensure that MAS8 is zero when writing TLB entries.Scott Wood2009-09-15-0/+7
| | | | | | | | Its reset value is random, and we sometimes read uninitialized TLB arrays. Make sure that we don't retain MAS8 from reading such an entry if the VF bit in MAS8 is set, attempts to use the mapping will trap. Signed-off-by: Scott Wood <scottwood@freescale.com>
* ppc/85xx: Don't enable interrupts before we're readyScott Wood2009-09-15-2/+2
| | | | | | | We cannot handle any exceptions while running in AS1, as the exceptions will transition back to AS0 without a valid mapping. Signed-off-by: Scott Wood <scottwood@freescale.com>
* ppc4xx: Big cleanup of PPC4xx definesStefan Roese2009-09-11-171/+171
| | | | | | | | | | | | | | | | This patch cleans up multiple issues of the 4xx register (mostly DCR, SDR, CPR, etc) definitions: - Change lower case defines to upper case (plb4_acr -> PLB4_ACR) - Change the defines to better match the names from the user's manuals (e.g. cprpllc -> CPR0_PLLC) - Removal of some unused defines Please test this patch intensive on your PPC4xx platform. Even though I tried not to break anything and tested successfully on multiple 4xx AMCC platforms, testing on custom platforms is recommended. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Fix compilation warning in 4xx miiphy.cStefan Roese2009-09-10-1/+1
| | | | | | | | | | This patch fixes the following compilation warning: miiphy.c: In function 'emac4xx_miiphy_read': miiphy.c:353: warning: dereferencing type-punned pointer will break strict-aliasing rules Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Allow overwriting pci target registers for all 4xx boardsMatthias Fuchs2009-09-10-2/+2
| | | | | | | | | | | | | This patch adds the CONFIG_PCI_4xx_PTM_OVERWRITE option and replaces the ugly 'if defined(BOARD1) || ... || defined(BOARDn)' construct in 4xx pci code. When CONFIG_PCI_4xx_PTM_OVERWRITE is defined the default ptm register setup can be overwritten through environment variables ptm1la, ptm1ms, ptm2la and ptm2ms to do application specific pci target BAR configuration. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc/85xx: Introduce RESET_VECTOR_ADDRESS to handle non-standard link addressKumar Gala2009-09-09-3/+7
| | | | | | | | | | Some board ports place TEXT_BASE at a location that would cause the RESET_VECTOR_ADDRESS not to be at 0xfffffffc when we link. By default we assume RESET_VECTOR_ADDRESS will be 0xfffffffc if the board doesn't explicitly set it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
* ppc/85xx: Clean up do_resetKumar Gala2009-09-08-16/+9
| | | | | | | | | | | There is no reason to do a run time check for e500 v1 based cores to determine if we have the GUTs RSTCR facility. Only the first generation of PQ3 parts (MPC8540/41/55/60) do not have it. So checking to see if we are e500 v2 would miss future parts (like e500mc). Just change this to be ifdef'd based on CONFIG_MPC85{40,41,55,60}. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx/86xx: Bug fix: call to puts in probecpu() moved to checkcpu().Poonam Aggrwal2009-09-08-6/+10
| | | | | | | While in probecpu() UART is still not initialized. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx/86xx: Device tree fixup for number of coresPoonam Aggrwal2009-09-08-0/+61
| | | | | | | | | | | | | | Fixing the number of cores in the device tree based on the actual number of cores on the system. With this same device tree image can be used for dual core and single core members of otherwise exactly same SOC. For example: * P2020RDB and P2010RDB * P1020RDB and P1011RDB * MPC8641D and MPC8641 Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx,86xx: Handling Unknown SOC versionPoonam Aggrwal2009-09-08-13/+7
| | | | | | | | | | | Incase the system is detected with Unknown SVR, let the system boot with a default value and a proper message. Now with dynamic detection of SOC properties from SVR, this is necessary to prevent a crash. Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/8xxx: Refactor code to determine if PCI is enabled & agent/hostKumar Gala2009-09-08-0/+226
| | | | | | | | | | | Refactor the code into a simple bitmask lookup table that determines if a given PCI controller is enabled and if its in host/root-complex or agent/end-point mode. Each processor in the PQ3/MPC86xx family specified different encodings for the cfg_host_agt[] and cfg_IO_ports[] boot strapping signals. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Cleanup makefile and related optional filesKumar Gala2009-09-08-18/+19
| | | | | | | | Cleaned up cpu/mpc85xx/Makefile to use CONFIG_* for those obvious cases we have like PCI, CPM2, QE. Also reworked it to use one line per file for everything and sorted in alphabetical order. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Fix bug in setup_mp codeKumar Gala2009-09-08-3/+29
| | | | | | | | | | | | | | Its possible that we try and copy the boot page code out of flash into a DDR location that doesn't have a TLB cover it. For example, if we have 3G of DDR we typically only map the first 2G. In the cases of 4G+ this wasn't an issue since the reset page TLB mapping covered the last page of memory which we wanted to copy to. We now change the physical address of the reset page TLB to map to the true physical location of the boot page code, copy and than set the TLB back to its 1:1 mapping of the reset page. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Add a simple function to search the TLBKumar Gala2009-09-08-0/+27
| | | | | | | | | | | Allow us to search the TLB array based on an address. This is useful if we want to change an entry but dont know where it happens to be located. For example, the boot page mapping we use on MP or the flash TLB that we change the WIMGE settings for after we've relocated. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Add support for setting IVORs to fixed offset defaultsKumar Gala2009-09-08-0/+95
| | | | | | | | | | | | In future Book-E implementations IVORs will most likely go away and be replaced with fixed offsets. The IVPR will continue to exist to allow for relocation of the interrupt vectors. This code adds support to setup the IVORs as their fixed offset values per the ISA 2.06 spec when we transition from u-boot to another OS either via 'bootm' or a cpu release. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* ppc/85xx: Fix up eSDHC controller clock frequency in the device treeDipen Dudhat2009-09-08-0/+7
| | | | | Signed-off-by: Dipen Dudhat <dipen.dudhat@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.1 at 2024-11-12 22:13:39 +0000