summaryrefslogtreecommitdiff
path: root/cpu
Commit message (Expand)AuthorAgeLines
* ENGR00243038: make get_mmc_env_devno to be a generic functionJason Liu2013-02-04-1/+11
* ENGR00238048: Add support for processor serial ATAG in uboot for iMX53Nitin Garg2012-12-21-0/+28
* ENGR00235821 mx6: correct work flow of PFDsAnson Huang2012-12-13-0/+31
* ENGR00236620: Add Android fastboot and recovery reboot supportNitin Garg2012-12-11-2/+38
* ENGR00235817 mx6: use SNVS LPGPR register to store boot mode value.Zhang Jiejing2012-12-11-4/+5
* ENGR00236337: mx6/clock: emi_slow clock rate is not printed out correctlyJason Liu2012-12-10-1/+1
* ENGR00223037 fsl: Add new board HDMI dongle for imx6 Q/DL.Zhang Xiaodong2012-11-28-0/+7
* ENGR00233366-5 Anatop PFUZE: move LDO bypass code to kernelRobin Gong2012-11-19-0/+3
* ENGR00233307 Need secure/encrypted boot for Widevine support.Dan Douglass2012-11-12-3/+46
* ENGR00231553: MX6SL: Uncovered an issue for I2C parent clockTerry Lv2012-10-30-2/+7
* ENGR00229614 mx6: disable VDDPU by default, xpu will enable it if needed.Anson Huang2012-10-16-1/+13
* ENGR00223797-2 MX6Q/DL CPU:Do not disable IPU display channelLiu Ying2012-09-27-2/+4
* ENGR00223236-1 [MX6]Change the temperature range to -40C ~ 125CAnson Huang2012-09-06-6/+7
* ENGR00221503-2 imx6: add cpu serial number support.Zhang Jiejing2012-08-31-0/+12
* ENGR00218972 MX6 Secure Boot, Change to dynamic HAB data authenticationEric Sun2012-08-01-18/+18
* ENGR00217401 common: fix build warningXinyu Chen2012-07-26-1/+1
* ENGR00217114-1 MX6 U-Boot, Secure Boot, one code base for MX6Q/DL/SLEric Sun2012-07-13-0/+177
* ENGR00211038 Fix the PAD_LVE implementationMahesh Mahadevan2012-05-30-1/+1
* ENGR00210918-2 cleanup android support, build pass all boardsZhang Jiejing2012-05-29-3/+190
* ENGR00209899-2 MX6Q: cleanup: cleanup fastboot, udc warnning.Zhang Jiejing2012-05-21-3/+7
* ENGR00210014 i.mx6 : i.mx6sl : add PAD_CTL_LVE support for pad configurationEric Sun2012-05-18-2/+8
* ENGR00209059 android: refine fastboot and recovery support.imx-android-r13.3Zhang Jiejing2012-05-14-0/+44
* ENGR00181337-1 i.mx6 : add initial support for i.mx6slEric Sun2012-05-02-9/+95
* ENGR00180623 fastboot: add fastboot in MX6Q_SABERSD boardsZhang Jiejing2012-04-24-1/+1
* ENGR00179762: i.MX6: print the SOC revision correctlyJason Liu2012-04-18-1/+1
* ENGR00174625: Remove build warnings for mx6qTerry Lv2012-02-17-2/+8
* ENGR00174104-1: Add conditional CONFIG to fix build breakTerry Lv2012-02-13-2/+6
* ENGR00171771 [MX6]Need to power down PCIe by defaultAnson Huang2012-01-12-1/+7
* ENGR00171091 [MX6]Remove workaround for reset issueAnson Huang2011-12-30-25/+0
* ENGR00171008 MX6Q/MFGTOOL : disable the workaround for MFGTOOLHuang Shijie2011-12-28-0/+2
* ENGR00170837 [MX6]Add temperatuer check into ubootAnson Huang2011-12-22-0/+103
* ENGR00162642: Fix bug in setting VDDSOC voltageRanjani Vaidyanathan2011-12-20-2/+2
* ENGR00160621 [MX6]Workaround for reset issueAnson Huang2011-12-20-0/+25
* ENGR00170299-1 Android: add support fastboot functionZhang Jiejing2011-12-15-1/+71
* ENGR00163513 MX6Q-UBOOT : Add download_mode cmdEric Sun2011-11-30-0/+50
* ENGR00162938 MX5: Add download_mode command in uboot to enter MFG download mode.Zhang Jiejing2011-11-23-0/+39
* ENGR00162874: Add enet clk change support for mx6Terry Lv2011-11-23-7/+75
* ENGR00162570: MX6-Increase VDDSOC_CAP voltage to 1.2VRanjani Vaidyanathan2011-11-17-0/+7
* ENGR00161373 Move the MAC address read from fuse code to MX6 SoC fileMahesh Mahadevan2011-11-03-2/+21
* ENGR00161254 MX6Q: Add NAND support in UbootAllen Xu2011-11-03-1/+3
* ENGR00139215 iMX61 Uboot support blow fuseRyan QIAN2011-11-02-0/+24
* ENGR00139254: Enable MX6Q Uboot Splash ScreenSandor Yu2011-09-02-0/+7
* ENGR00155283: Set dpgdck0_2_en to 0 when freq is lower than 300MHzTerry Lv2011-09-01-2/+4
* ENGR00155156 [MX6]Clean up debug info in ubootAnson Huang2011-08-22-23/+0
* ENGR00151310 mx53 smd: force warm reset as cold resetLily Zhang2011-07-22-15/+0
* ENGR00144424 MX6: enable uboot for ARM2(SABREAUTO) CPU boardAnson Huang2011-06-24-0/+1662
* ENGR00143298: Reinit uart after using clk commandTerry Lv2011-05-20-0/+6
* ENGR00143469 mx53 smd: pull down GPIO_9 to reset the boardLily Zhang2011-05-16-0/+15
* ENGR00141885: mx50 and mx53 reboot fail when booting from spi norTerry Lv2011-04-20-2/+15
* ENGR00141335-2: get more accurate ipg_per clock frequencyTerry Lv2011-04-11-17/+24
generated by cgit v1.1 at 2024-11-22 00:28:30 +0000