summaryrefslogtreecommitdiff
path: root/board/freescale
Commit message (Collapse)AuthorAgeLines
* p2041rdb: fix serdes clock mapShaohui Xie2011-12-06-10/+15
| | | | | | | | | | | | | | | | | | Description of SerDes clock Bank2 setting in p2041 hardware specification is wrong, the clock map which based on it is wrong either, so fix the serdes clock map. wrong setting of SERDES Reference Clocks Bank2: SW2[5:6] = ON OFF =>100MHz for PCI mode SW2[5:6] = OFF ON =>125MHz for SGMII mode right setting of SERDES Reference Clocks Bank2: SW2[5:6] = OFF OFF =>100MHz for PCI mode SW2[5:6] = OFF ON =>125MHz for SGMII mode SW2[5:6] = ON OFF =>156.25MHZ Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* board/freescale/mpc8610hpcd/mpc8610hpcd.c: Fix GCC 4.6 build warningWolfgang Denk2011-12-02-2/+1
| | | | | | | | | | | Fix: mpc8610hpcd.c: In function 'pci_init_board': mpc8610hpcd.c:238:15: warning: variable 'pordevsr' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Kumar Gala <galak@kernel.crashing.org> Acked-by: Kumar Gala <galak@kernel.crashing.org>
* mpc85xx: support for Freescale COM Express P2020Ira W. Snyder2011-11-29-0/+516
| | | | | | | | | | | | | | | | | | This adds support for the Freescale COM Express P2020 board. This board is similar to the P1_P2_RDB, but has some extra (as well as missing) peripherals. Unlike all other mpc85xx boards, it uses a watchdog timeout to reset. Using the HRESET_REQ register does not work. This board has no NOR flash, and can only be booted via SD or SPI. This procedure is documented in Freescale Document Number AN3659 "Booting from On-Chip ROM (eSDHC or eSPI)." Some alternative documentation is provided in Freescale Document Number P2020RM "P2020 QorIQ Integrated Processor Reference Manual" (section 4.5). Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/p3060qds: Add board related support for P3060QDS platformShengzhou Liu2011-11-29-8/+1711
| | | | | | | | | | | | | | | | | | | | | | | | The P3060QDS is a Freescale reference board for the six-core P3060 SOC. P3060QDS Board Overview: Memory subsystem: - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus) - 128M Bytes NOR flash single-chip memory - 16M Bytes SPI flash - 8K Bytes AT24C64 I2C EEPROM for RCW Ethernet: - Eight Ethernet controllers (4x1G + 4x1G/2.5G) - Three VSC8641 PHYs on board (2xRGMII + 1xMII) - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3 PCIe: Two PCI Express 2.0 controllers/ports USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board I2C: Four I2C controllers UART: Supports two dUARTs up to 115200 bps for console RapidIO: Two RapidIO, sRIO1 and sRIO2 Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc83xx: mpc8360emds - fix gcc 4.6 compiler warningKim Phillips2011-11-16-1/+2
| | | | | | | | Configuring for MPC8360EMDS_66_HOST_33 - Board: MPC8360EMDS, Options: CLKIN_66MHZ,PCI,PCI_33M,PQ_MDS_PIB=1 mpc8360emds.c: In function 'board_eth_init': mpc8360emds.c:178:12: warning: array subscript is above array bounds [-Warray-bounds] Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* powerpc/85xx: Fix builds of P1020/P2020RDB-PC_36BIT_NANDKumar Gala2011-11-11-4/+6
| | | | | | | Size grew a bit so nand-spl didn't fit in 4k, reduce done by removing LAW entries not needed during SPL phase. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* board/freescale/mpc8569mds/mpc8569mds.c: Fix GCC 4.6 build warningKumar Gala2011-11-11-2/+0
| | | | | | | mpc8569mds.c: In function 'local_bus_init': mpc8569mds.c:306:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* board/freescale/mpc8568mds/mpc8568mds.c: Fix GCC 4.6 build warningKumar Gala2011-11-11-2/+1
| | | | | | | | | | | Fix: mpc8568mds.c: In function 'local_bus_init': mpc8568mds.c:150:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable] mpc8568mds.c: In function 'pib_init': mpc8568mds.c:271:11: warning: variable 'orig_i2c_bus' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* board/freescale/mpc8548cds/mpc8548cds.c: Fix GCC 4.6 build warningKumar Gala2011-11-11-4/+0
| | | | | | | | | | | Fix: mpc8548cds.c: In function 'local_bus_init': mpc8548cds.c:87:7: warning: variable 'lbc_hz' set but not used [-Wunused-but-set-variable] mpc8548cds.c: In function 'lbc_sdram_init': mpc8548cds.c:121:7: warning: variable 'cpu_board_rev' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* board/freescale/common/pixis.c: Fix GCC 4.6 build warningKumar Gala2011-11-11-3/+1
| | | | | | | | | Fix: pixis.c: In function 'strfractoint': pixis.c:383:6: warning: variable 'intarr_len' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* board/freescale/common/cds_pci_ft.c: Fix GCC 4.6 build warningKumar Gala2011-11-11-2/+1
| | | | | | | | | Fix: cds_pci_ft.c: In function 'cds_pci_fixup': cds_pci_ft.c:31:12: warning: variable 'tmp' set but not used [-Wunused-but-set-variable] Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/mpc85xx: Set SYSCLK to the required frequencyJerry Huang2011-11-11-1/+99
| | | | | | | | | | | | | | | | | | | | | For ICS307-02, there is one general expression to generate SYSCLK: CLK1Frequency = InputFrequency * 2 * (VDW + 8) / ((RDW + 2) * OD) If we want the required frequency for SYSCLK, we must find one solution to generate this frequency, this solution includes VDW, RDW and OD. For OD, there are only eight option value: 10, 2, 8, 4, 5, 7, 3, 6. For RDW, the range is 1 to 127. For VDW, the range is 4 to 511. First, we use one OD, RDW and required SYSCLK to calculate the VDW, if VDW is in it's range, we will calculate the CLK1Frequency with the OD, RDW and VDW calculated, and we will check this percent (CLK1Frequency / required SYSCLK), and the precision is 1/1000. if the percent is less than 1/1000, we think the CLK1Frequency is we want. Otherwise, We will continue to calculate it with the next OD and RDW. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Fix MPC8572DS NAND buildKumar Gala2011-11-08-0/+2
| | | | | | | Reduce NAND SPL build size by not include TLB entries that arent used by it. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/85xx: Make inclusion of USB device fixup conditionalRamneek Mehresh2011-11-08-0/+7
| | | | | | | | Include call to usb device-fixup only when CONFIG_HAS_FSL_DR_USB is defined for the platform - P1020RDB, P1010RDB, P1020-PC Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* powerpc/mpc8548cds: Fix network initializationchenhui zhao2011-11-08-7/+58
| | | | | | | | | Add board_eth_init(). PCIe network card is also supported. Put RGMII init after tsec_eth_init(). Skip initializing eTSEC3 and eTSEC4 with Carrier boards prior to ver 1.3. Signed-off-by: Ebony Zhu Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
* powerpc/QorIQ: fix network frame manager TBI PHY address settingsRoy Zang2011-11-08-24/+0
| | | | | | | | | | | | TBI PHY address (TBIPA) register has been set in general frame manager phy init funciton dtsec_init_phy() in drivers/net/fm/eth.c So remove the duplicate code on QorIQ frame manager Ethernet related platforms, which include Hydra board, P4080DS board and P2041rdb board. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Cc: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2011-11-08-45/+89
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mpc83xx: powerpc/mpc83xx: Add 33.33MHz support for mpc8360emds powerpc/mpc83xx: Add 512MB DDR support for mpc8360emds mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds code mpc83xx: Cleanup usage of LBC constants mpc83xx: Cleanup usage of DDR constants mpc83xx: Cleanup usage of BAT constants mpc83xx: cosmetic: vme8349.h checkpatch compliance mpc83xx: cosmetic: ve8313.h checkpatch compliance mpc83xx: cosmetic: sbc8349.h checkpatch compliance mpc83xx: cosmetic: mpc8308_p1m.h checkpatch compliance mpc83xx: cosmetic: kmeter1.h checkpatch compliance mpc83xx: cosmetic: TQM834x.h checkpatch compliance mpc83xx: cosmetic: SIMPC8313.h checkpatch compliance mpc83xx: cosmetic: MVBLM7.h checkpatch compliance mpc83xx: cosmetic: MPC837XERDB.h checkpatch compliance mpc83xx: cosmetic: MPC837XEMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8360ERDK.h checkpatch compliance mpc83xx: cosmetic: MPC8360EMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8349ITX.h checkpatch compliance mpc83xx: cosmetic: MPC8349EMDS.h checkpatch compliance mpc83xx: cosmetic: MPC832XEMDS.h checkpatch compliance mpc83xx: cosmetic: MPC8323ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8315ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8313ERDB.h checkpatch compliance mpc83xx: cosmetic: MPC8308RDB.h checkpatch compliance mpc83xx: cosmetic: MERGERBOX.h checkpatch compliance mpc83xx: Fix ipic structure definition powerpc, mpc83xx: add DDR SDRAM Timing Configuration 3 definitions cosmetic, powerpc, mpc83xx: checkpatch cleanup powerpc/83xx: move km 83xx specific i2c code to km83xx_i2c mpc83xx: fix global timer structure definition
| * powerpc/mpc83xx: Add 512MB DDR support for mpc8360emdsJerry Huang2011-11-03-1/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new MPC8360EMDS board supports 512MB DDR since 2008. For 512MB DDR: BAT0 is used for the first 256MB memory, BAT4 is used for the second 256MB memory and the address space of SDRAM follows the DDR, so if the size of DDR is 256MB, the BAT4 will be used for SDRAM and if the size of DDR is 512MB, the BAT4 will be used for the second 256MB memory and there is no BAT for SDRAM. Therefore, if the size of DDR is 512MB, this patch will use BAT6 for SDRAM and BAT5 will be used for PCI MEM to replace the BAT6 after the codes relocates to the DDR. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> CC: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: Rename CONFIG_SYS_DDR_CONFIG and cleanup DDR csbnds codeJoe Hershberger2011-11-03-44/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | Rename CONFIG_SYS_DDR_CONFIG to include which CS it is configuring Cleanup the setting of the csnbds to respect the setting of CONFIG_SYS_DDR_SDRAM_BASE Use __ilog2 instead of writing the code to compute it Disable unused CS configs Ensure ddrlaw.bar is configured Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-11-08-52/+23
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: Arm: re-introduce the MACH_TYPE_XXXXXX for EB_CPUX9K2 board arm: jadecpu: Readd MACH_TYPE_JADECPU at91: defined mach-types for otc570 board in board config file at91: defined mach-types for meesc board in board config file mx31pdk: Enable D and I caches ehci-mxc: remove incorrect comment README: Fix supported i.MX SoC list for CONFIG_MXC_SPI mx53: Turn off child clocks before reconfigure perclk_root qong: enable support for compressed images imx: imx31_phycore.h: fix checkpatch warnings vision2: Remove unused get_board_rev function mx53smd: Remove unused get_board_rev function mx53ard: Remove unused get_board_rev function mx53evk: Remove unused get_board_rev function mx53evk: Add RTC support mx53loco: Remove unused get_board_rev function mx53evk: Remove unneeded '1' from mx53evk.h OMAP3: mvblx: Initial support for mvBlueLYNX-X ARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH_TYPE omap3: mem: Move comments next to definitions omap3: mem: Clean-up whitespaces omap3: mem: Define and use common macros Davinci: ea20: added PREBOOT to configuration Davinci: ea20: added I2C support Davinci: ea20: added video support VIDEO: davinci: add framebuffer to da8xx ARM: Davinci: added missing registers to hardware.h Davinci: ea20: add gpios for LCD backlight control Davinci: ea20: add gpio for keeping power on in board_late_init Davinci: ea20: Add default U-Boot environment Davinci: ea20: Add early init to get early output from console Davinci: ea20: Add NAND support Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console Davinci: ea20: set console on UART0 arm, davinci: add cam_enc_4xx support arm926ejs, davinci: add missing spi defines for dm365 arm926ejs, davinci: add cpuinfo for dm365 arm, davinci: add lowlevel function for dm365 soc arm, davinci: add header files for dm365 spl, nand: add 4bit HW ecc oob first nand_read_page function arm, davinci: add support for new spl framework spl: add option for adding post memory test to the SPL framework net, davinci_emac: make clock divider in MDIO control register configurable arm, usb, davinci: make USBPHY_CTL register configurable usb, davinci: add enable_vbus() weak function omap3evm: fix errors caused by multiple definitions omap3evm: Add (quick) configuration for NAND only omap3evm: Add (quick) configuration for MMC/SD only omap3evm: move common config options to new file omap3evm: Prepare to split configuration omap3evm: Reorder related config options omap/spl: actually enable the console davinci_emac: compilation fix, phy is array now omap3evm: Set environment variable 'ethaddr' arm, arm926: fix missing symbols in NAND_SPL mode arm, davinci: Add function lpsc_syncreset() arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD arm/km: portl2 environment address update to P1B arm/km: adapt bootcounter evaluation arm/km: enable jffs2 cmds arm/km: trigger reconfiguration for the Xilinx FPGA arm/km: add boardid and hwkey to kernel command line ARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile ARM boards netspace_v2: enable I2C EEPROM support netspace_v2: fix SDRAM configuration armada100: define CONFIG_SYS_CACHELINE_SIZE pantheon: define CONFIG_SYS_CACHELINE_SIZE kirkwood: define CONFIG_SYS_CACHELINE_SIZE kirkwood: drop empty asm-offsets.s file arm/km/mgcoge3un: enhance "waitforne" feature arm/km: add variable waitforne to mgcoge3un gplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared ARM: dreamplug: fix compilation ARM: DockStar: fix compilation ARM: netspace_v2: fix warnings am335x: Drop board_sysinfo struct am335x: Temporarily add MACH_TYPE define misc:pmic:samsung Enable PMIC driver at C210 Universal target dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p UNIVERSAL C210 target dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p GONI target smdkv310: use macro for mmc data read function address smdkv310: use spl framework for mmc spl SMDKV310: use get_ram_size() to validate dram size SMDKV310: Initialize board id using CONFIG_MACH_TYPE ORIGEN : use absolute paths and fix tool naming ORIGEN : enable device tree support MX25: tx25: Fix building due to missing MACH_TYPE mx31: Add board support for HALE TT-01 mx31: add ESD control registers mx31: define pins and init for UART2 and CSPI3 MX35: add support for flea3 board MX51: vision2: add MACH_TYPE in config file vision2: Remove unused header file mx51evk: Remove unused get_board_rev function mx51evk: Remove unneeded '1' from mx51evk.h I2C: Fix mxc_i2c.c problem on imx31_phycore mx35pdk: Add RTC support mx51evk: Use GPIO API for configuring the IOMUX mx51evk: Add RTC support rtc: Make mc13783-rtc driver generic qong: remove unneeded IOMUX settings qong: Use mx31_set_gpr to setup USBH2 pins mx31: Introduce mx31_set_gpr function mx31pdk: Add MC13783 PMIC support qong: remove unneeded "1" from qong.h misc: pmic: fix regression in pmic_fsl.c (SPI) mx5 configs: CONFIG_PRIME should really be CONFIG_ETHPRIME MX35: Drop unnecessary prototypes from imx-regs.h I2C: added I2C-2 and I2C-3 to MX35 MX35: factorize common assembly code MX35: add reset cause as provided by other i.MX MX35: add pins definition for UART3 MX35: added ESDC structure to imx-regs
| * | mx31pdk: Enable D and I cachesFabio Estevam2011-11-04-0/+8
| | | | | | | | | | | | | | | | | | | | | Enable D and I caches on mx31pdk. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * | mx53smd: Remove unused get_board_rev functionFabio Estevam2011-11-04-5/+0
| | | | | | | | | | | | | | | | | | No board information is passed for MX53SMD, so remove get_board_rev function. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | mx53ard: Remove unused get_board_rev functionFabio Estevam2011-11-04-5/+0
| | | | | | | | | | | | | | | | | | No board information is passed for MX53ARD, so remove get_board_rev function. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | mx53evk: Remove unused get_board_rev functionFabio Estevam2011-11-04-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | No board information is passed for MX53EVK, so remove get_board_rev function. Cc: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jason Liu <r64343@freescale.com>
| * | mx53loco: Remove unused get_board_rev functionFabio Estevam2011-11-04-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | No board information is passed for MX53LOCO, so remove get_board_rev function. Cc: Jason Liu <r64343@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Jason Liu <r64343@freescale.com>
| * | mx51evk: Remove unused get_board_rev functionFabio Estevam2011-11-03-9/+0
| | | | | | | | | | | | | | | | | | No board information is passed for MX51EVK, so remove get_board_rev function. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | mx51evk: Use GPIO API for configuring the IOMUXFabio Estevam2011-11-03-5/+3
| | | | | | | | | | | | | | | | | | | | | | | | GPIO API provides mxc_request_iomux function for setting the IOMUX mode. Use this function instead of directly writing to the IOMUX register. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | mx31pdk: Add MC13783 PMIC supportFabio Estevam2011-11-03-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add MC13783 PMIC support. Tested by using the 'date' command, which reads the MC13783 RTC registers: MX31PDK U-Boot > date Date: 1970-01-01 (Thursday) Time: 2:22:35 Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | MX35: added ESDC structure to imx-regsStefano Babic2011-11-03-18/+0
| |/ | | | | | | | | | | | | | | The structure and PLL defines are added to the imx-regs.h file and dropped from board header files. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-coldfireWolfgang Denk2011-11-08-3/+0
|\ \ | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-coldfire: ColdFire: The EB+MCF-EV123 boards config update ColdFire: Fix the compile issue for M52277 ColdFire:Moving the remaining coldfire boards to boards.cfg
| * | ColdFire: Fix the compile issue for M52277Jason Jin2011-11-07-3/+0
| |/ | | | | | | | | | | | | | | After commit 327474f854a33b5b7a11c374b0446d1d40d9f673, the M52277EVB_stmicro configuration fail to build. Fix it by moving the env outside the flash and update the lds file. Signed-off-by: Jason Jin <Jason.jin@freescale.com>
* | board/freescale/mpc8266ads/mpc8266ads.c: Fix GCC 4.6 build warningWolfgang Denk2011-11-07-2/+0
| | | | | | | | | | | | | | | | | | Fix: mpc8266ads.c: In function 'initdram': mpc8266ads.c:278:9: warning: variable 'spd_size' set but not used [-Wunused-but-set-variable] Signed-off-by: Wolfgang Denk <wd@denx.de>
* | board/freescale/mpc8266ads/mpc8266ads.c: CodingStyle cleanupWolfgang Denk2011-11-07-290/+304
|/ | | | | | | Make (mostly) checkpatch clean. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Rune Torgersen <runet@innovsys.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2011-10-28-40/+72
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-arm: ARM: Add Calxeda Highbank platform dkb: make mmc command as default enabled Marvell: dkb: add mmc support ARM: pantheon: add mmc definition davinci: remove config.mk file from the sources ARM:AM33XX: Add support for TI AM335X EVM ARM:AM33XX: Added timer support ARM:AM33XX: Add emif/ddr support ARM:AM33XX: Add clock definitions ARM:AM33XX: Added support for AM33xx omap3/emif4: fix registers definition davinci: remove obsolete macro CONFIG_EMAC_MDIO_PHY_NUM davinci: emac: add support for more than 1 PHYs davinci: emac: add new features to autonegotiate for EMAC da850evm: Move LPSC configuration to board_early_init_f() omap4_panda: Build in cmd_gpio support on panda omap: Don't use gpio_free to change direction to input mmc: omap: Allow OMAP_HSMMC[23]_BASE to be unset OMAP3: overo : Add environment variable optargs to bootargs OMAP3: overo: Move ethernet CS4 configuration to execute based on board id OMAP3: overo : Use ttyO2 instead of ttyS2. da830: add support for NAND boot mode dm36x: revert cache disable patch dm644X: revert cache disable patch devkit8000: Add malloc space omap: spl: fix build break due to changes in FAT OMAP3 SPL: Provide weak omap_rev_string omap: beagle: Use ubifs instead of jffs2 for nand boot omap: overo: Disable pull-ups on camera PCLK, HS and VS signals omap: overo: Configure mux for gpio10 SPL: Add DMA library omap3: Add interface for omap3 DMA omap3: Add DMA register accessors omap3: Add Base register for DMA arm, davinci: add missing LSPC define for MMC/SD1 U-Boot/SPL: omap4: Make ddr pre-calculated timings as default. DaVinci: correct MDSTAT.STATE mask omap4: splitting padconfs into common, 4430 and 4460 omap4: adding revision detection for 4460 ES1.1 omap4: replacing OMAP4_CONTROL with OMAP4430_CONTROL gplug: fixed build error as a result of code cleanup patch kirkwood_spi: add dummy spi_init() gpio: mvmfp: reduce include platform file ARM: orion5x: reduce dependence of including platform file serial: reduce include platform file for marvell chip ARM: kirkwood: reduce dependence of including platform file ARM: armada100: reduce dependence of including platform file ARM: pantheon: reduce dependence of including platform file Armada100: Add env storage support for Marvell gplugD Armada100: Add SPI flash support for Marvell gplugD Armada100: Add SPI support for Marvell gplugD SPI: Add SPI driver support for Marvell Armada100 dreamplug: initial board support. imx: fix coding style misc: pmic: drop old Freescale's pmic driver MX31: mx31pdk: use new pmic driver MX31: mx31ads: use new pmic driver MX31: mx31_litekit: use new pmic driver MX5: mx53evk: use new pmic driver MX5: mx51evk: use new pmic driver MX35: mx35pdk: use new pmic driver misc: pmic: addI2C support to pmic_fsl driver misc: pmic: use I2C_SET_BUS in pmic I2C MX5: efikamx/efikasb: use new pmic driver MX3: qong: use new pmic driver RTC: Switch mc13783 to generic pmic code MX5: vision2: use new pmic driver misc: pmic: Freescale PMIC switches to generic PMIC driver misc:pmic:samsung Enable PMIC driver at GONI target misc:pmic:max8998 MAX8998 support at a new PMIC driver. misc:pmic:core New generic PMIC driver mx31pdk: Remove unneeded config mx31: provide readable WEIM CS accessor MX51: vision2: Set global macros I2C: Add i2c_get/set_speed() to mxc_i2c.c ARM: Update mach-types devkit8000: Add config to enable SPL MMC boot devkit8000: protect board_mmc_init arm, post: add missing post_time_ms for arm cosmetic, post: Codingstyle cleanup arm, logbuffer: make it compileclean tegra2: Enable MMC for Seaboard tegra2: Add more pinmux functions tegra2: Rename PIN_ to PINGRP_ tegra2: Add more clock functions tegra2: Clean up board code a little tegra2: Rename CLOCK_PLL_ID to CLOCK_ID
| * imx: fix coding styleFabio Estevam2011-10-27-1/+1
| | | | | | | | | | | | | | | | | | Fix checkpatch warning and errors in several i.MX related files. While at it also address a checkpatch warning at arch/arm/cpu/armv7/mx5/soc.c regarding the usage of extern in a C file. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * MX5: mx53evk: use new pmic driverStefano Babic2011-10-27-6/+11
| | | | | | | | | | | | | | | | Switch to new pmic generic driver. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Jason Liu <jason.hui@linaro.org> Acked-by: Jason Liu <jason.hui@linaro.org>
| * MX5: mx51evk: use new pmic driverStefano Babic2011-10-27-21/+26
| | | | | | | | | | | | Switch to new pmic generic driver. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * MX35: mx35pdk: use new pmic driverStefano Babic2011-10-27-6/+12
| | | | | | | | | | | | Switch to new pmic generic driver. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * mx31: provide readable WEIM CS accessorHelmut Raiger2011-10-27-6/+22
| | | | | | | | | | | | | | | | | | | | | | | | setup_weimcs() and some macros are added to support the setup for i.MX31 WEIM chip selects. As a compromise between verbosity and readability an ASCII-art'ish bit comment is used instead of bitfields. All i.MX31 boards have been patched to use this approach using a helper program to verify the changes. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
* | GCC4.6: Squash warnings in mpc8610hpcd.cMarek Vasut2011-10-27-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | mpc8610hpcd.c: In function 'misc_init_r': mpc8610hpcd.c:79: warning: format '%02lx' expects type 'long unsigned int', but argument 2 has type 'int' mpc8610hpcd.c:86: warning: format '%02lx' expects type 'long unsigned int', but argument 2 has type 'int' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
* | GCC4.6: Squash warnings in diu.cMarek Vasut2011-10-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | diu.c: In function 'diu_set_pixel_clock': diu.c:77: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'u32' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
* | GCC4.6: Squash warning in mpc5121ads.cMarek Vasut2011-10-27-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | mpc5121ads.c: In function 'misc_init_r': mpc5121ads.c:256: warning: format '%02lx' expects type 'long unsigned int', but argument 2 has type 'int' mpc5121ads.c:263: warning: format '%02lx' expects type 'long unsigned int', but argument 2 has type 'int' Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org>
* | cosmetic: s/BOARD_LATE_INIT/CONFIG_BOARD_LATE_INITHelmut Raiger2011-10-27-3/+3
|/ | | | | | | | | | | | | This renames BOARD_LATE_INIT to CONFIG_BOARD_LATE_INIT. Along the way it removes some leftover #define BOARD_LATE_INIT 1 and adds some basic documentation for board specific callbacks in README. Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Stefano Babic <sbabic@denx.de>
* build: add missing $(AR)->$(cmd_link_o_target) updateMike Frysinger2011-10-22-1/+1
| | | | | | | | | Seems people fixed their files to use libfoo.o, but didn't actually update the creation targets to use $(cmd_link_o_target). Update the rest of the Makefile's found with grep. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Simon Glass <sjg@chromium.org>
* consolidate mdelay by providing a common function for all usersAnatolij Gustschin2011-10-22-2/+0
| | | | | | | | | There are several mdelay() definitions in the driver and board code. Remove them all and provide a common mdelay() in lib/time.c. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2011-10-21-56/+56
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mpc85xx: mpc85xx: Add inline GPIO acessor functions powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9) powerpc/85xx: Fix P2020DS booting powerpc/85xx: Update USB device tree status based on pin settings fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpers powerpc/85xx: Add support for RMan LIODN initialization powerpc/85xx: Update device tree handling for SRIO powerpc/85xx: Update setting of SRIO LIODNs fm: Don't allow disabling of FM1-DTSEC1 fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree
| * powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)Timur Tabi2011-10-20-8/+30
| | | | | | | | | | | | | | | | The work-around for P4080 erratum SERDES9 says that the SERDES receiver lanes should be reset after the XAUI starts tranmitting alignment signals. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * powerpc/85xx: Fix P2020DS bootingKumar Gala2011-10-18-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | The following commit removed the code that set odt_rd_cfg and odt_wr_cfg. With out this code P2020DS board will not boot: commit 712cf7ab0b58e51a69e339397457d3591b6b650e Author: York Sun <yorksun@freescale.com> Date: Mon Oct 3 09:19:53 2011 -0700 powerpc/mpc8xxx: Merge entries in DDR speed table Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpersShengzhou Liu2011-10-18-48/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add common function fdt_set_node_status() to assist in various locations that we set a nodes status. This function utilizes the status values that are part of the EPAPR spec (on power.org). fdt_set_status_by_alias() is based on fdt_set_node_status() but uses an alias string to identify the node to update. We also add some shortcut functions to help the common cases of setting "okay" and "disabled": fdt_status_okay() fdt_status_disabled() fdt_status_okay_by_alias() fdt_status_disabled_by_alias() Finally, we fixup the corenet_ds ethernet code which previously had a function by the same name that can be replaced with the new helpers. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Gerald Van Baren <vanbaren@cideas.com>
* | ColdFire: Fix compilation with CONFIG_SYS_DRAMSZ1 definedstany MARCEL2011-10-19-0/+3
| | | | | | | | | | | | | | A temp variable was used but not declared, with CONFIG_SYS_DRAMSZ1 defined. This variable is now declared in the functione when needed. Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com>
generated by cgit v1.1 at 2024-11-14 22:09:42 +0000